Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Sub Group : Aircraft accessories & Fittings )
Total Standards : 105
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10041 : 1981 |
Glossary of terms for airline technical operations | 0 | ---- | Download | |
| 2 | IS 10195 : 1982 |
General requirements for insulated air cargo containers | 0 | ---- | Download | |
| 3 | IS 10196 : 1982 |
Guidelines for transportation of dead body and cremated remains of human beings by air | 0 | ---- | Download | |
| 4 | IS 10241 : Part 1 : 1982 |
Specification for electrical cables for aircraft: Part 1 general requirements and tests | 0 | ---- | Download | |
| 5 | IS/ISO 105 : Part S03 : 1993/ ISO 11893: 2011 |
Textiles Tests for colour fastness Part S03: Colour fastness to vulcanization: Open steam | 0 | ---- | Buy | |
| 6 | IS/ISO 105-P01 : 1993/ISO 23461: 2010 |
Textiles Tests for colour fastness Part P01: Colour fastness to dry heat excluding pressing | 0 | ---- | Buy | |
| 7 | IS 10515 : 1983 |
General requirements of main deck container/pallet loader for aircraft | 0 | ---- | Download | |
| 8 | IS 10610 : 1983 |
Aircraft pressure cabin ground test connections | 0 | ---- | Download | |
| 9 | IS 10628 : 1983 |
General requirements for aerospace bolts and nuts | 0 | ---- | Download | |
| 10 | IS 10682 : 1983 |
Specification for aircraft safety belts, lap type | 0 | ---- | Download | |
| 11 | IS 10869 : Part 2 : 1984 |
Specification for igloo: Part 2 structural igloo assembly | 0 | ---- | Download | |
| 12 | IS 10869 : Part 1 : 1984 |
Specification for igloo: Part 1 non - Structural igloo | 0 | ---- | Download | |
| 13 | IS 10965 : 1984 |
Specification for valves for aircraft tyre tubes | 0 | ---- | Download | |
| 14 | IS 10966 : 1984 |
Dimensions of valve stem of aircraft tyre tube valves | 0 | ---- | Download | |
| 15 | IS 10980 : Part 3 : 2014/ISO 5855-3 : 1999 (1 Revision) |
Aerospace - MJ threads: Part 3 limit dimensions for fittings for fluid systems (First Revision) | 0 | ---- | Buy | |
| 16 | IS 10980 : Part 1 : 2014/ISO 5855-1 : 1999 (1 Revision) |
Aerospace - MJ threads: Part 1 general requirements (First Revision) | 0 | ---- | Buy | |
| 17 | IS 10980 : Part 2 : 2014/ISO 5855-2 : 1999 (1 Revision) |
Aerospace - MJ threads: Part 2 limit dimensions for bolts and nuts (First Revision) | 0 | ---- | Buy | |
| 18 | IS/ISO 10987 : 2012/ISO 21384-4 : 2020 |
EARTH-MOVING MACHINERY SUSTAINABILITY TERMINOLOGY SUSTAINABILITY FACTORS AND REPORTING | 0 | ---- | Buy | |
| 19 | IS 10992 : Part 2 : 2003/ISO 3324-2:1998 (1 Revision) |
Aircraft tyres and rims: Part 2 test methods for tyres (First Revision) | 0 | ---- | Buy | |
| 20 | IS 10992 : Part 1 : 2003/ISO 3324-1:1997 (1 Revision) |
Aircraft tyres and: Part 1 specifications (First Revision) | 0 | ---- | Buy | |
| 21 | IS 11165 : 1985 |
Specification for aircraft seat rails and pins | 0 | ---- | Download | |
| 22 | IS 11167 : 2011 (2 Revision) |
Aircraft ground equipment - Lower deck loader - Functional requirements (Second Revision) | 0 | ---- | Download | |
| 23 | IS 11642 : Part 2 : 1986 |
Specification for aluminium hexagonal honeycomb core: Part 2 methods of tests | 0 | ---- | Download | |
| 24 | IS 11642 : Part 1 : 1986 |
Specification for aluminium hexagonal honeycomb core: Part 1 general requirements | 0 | ---- | Download | |
| 25 | IS 11644 : 1999 (1 Revision) |
Tolerances of form and position for aerospace bolts and screws (First Revision) | 0 | ---- | Buy | |
| 26 | IS 11649 : Part 2 : 1986 |
Specification for aluminium honeycomb sandwich panels for civil aircraft floors: Part 2 methods of tests | 0 | ---- | Download | |
| 27 | IS 11649 : Part 1 : 1986 |
Specification for aluminium honeycomb sandwich panel for civil aircraft floors: Part 1 general design criteria | 0 | ---- | Download | |
| 28 | IS/ISO/IEC 11801 : Part 2 : 2017/ISO 23460: 2011 |
Information technology Generic cabling for customer premises Part 2: Office premises | 0 | ---- | Buy | |
| 29 | IS/ISO 11893 : 2011/ISO 11893:2011 |
Space Systems — Programme Management — Project Organization | 0 | ---- | Buy | |
| 30 | IS 1202 : 2021/ISO 10795: 2019 (1 Revision) |
Methods for testing tar and bituminous materials - Determination of specific gravity (Second Revision) | 0 | ---- | Buy | |
| 31 | IS 12375 : Part 10 : 2023/ ISO 23462: 2014 |
Implants for surgery - Partial and total hip-joint prostheses Part 10 Determination of resistance to static load of modular femoral heads | 0 | ---- | Buy | |
| 32 | IS 13269 : 1991 |
Aircraft - Single - Hole and triple - Hole mounting (Class 3) liever - Operated manual switches - Dimensions | 0 | ---- | Download | |
| 33 | IS 13296 : 1992 |
Aircraft - Performance requirements for lever operated manual switches (Class 3) - Specification | 0 | ---- | Buy | |
| 34 | IS 13309 : 1992 |
Aircraft - Performance requirements for lever operated manual switches (Class 1 And 2) - Specification | 0 | ---- | Buy | |
| 35 | IS 13835 : Part 2 : 2012/ISO 461-2 : 1985 (1 Revision) |
Aircraft - Connectors for ground electrical supplies: Part 2 dimensions (First Revision) | 0 | ---- | Buy | |
| 36 | IS 14388 : 1996 |
Aircraft - Lower - Deck turn table container - Dolley functional requirements | 0 | ---- | Download | |
| 37 | IS 14432 : 1997 |
Air craft - Ambulift - Functional requirements | 0 | ---- | Download | |
| 38 | IS 14547 : 1998 |
Aircraft - Electrical cables and cable harnesses - Terminology | 0 | ---- | Download | |
| 39 | IS 14548 : 1998 |
Aircraft - Standby magnetic compass - Specification | 0 | ---- | Download | |
| 40 | IS 14751 : 1999/ISO 11086:1996 |
Gas turbines - Vocabulary | 0 | ---- | Buy | |
| 41 | IS 14798 : 2000 |
Aerospace - Self - Locking, fixed, single - Lug anchor nuts with counterbore, classification 1100 mpa/235 degree C - Specification | 0 | ---- | Buy | |
| 42 | IS 14799 : 2000 |
Aerospace - Nuts, anchor, self - Locking, floating two - Lug, with counterbore with mj threads, coated or uncoated, classification 1100 mpa/235"C, 1100 mpa/315"C and 1 100 mpal425"C - Specification | 0 | ---- | Download | |
| 43 | IS 14824 : 2000/ISO 3191:1998 |
Aerospace - Self - Locking, fixed, single - Lug anchor nuts, reduced series, with counterbore, with MJ threads, strength classification 1100 mpa/235° C - Specification | 0 | ---- | Buy | |
| 44 | IS 15293 : 2003/ISO 5858:1999 |
Aerospace - Nuts, self - Locking, with maximum operating temperature less than or equal to 425°C - Procurement specification | 0 | ---- | Buy | |
| 45 | IS 15308 : 2003/ISO 13596:2000 |
Aerospace - Inserts, self - Locking with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions | 0 | ---- | Buy | |
| 46 | IS 15428 : 2004 |
Retreading of radial/cross ply tyres for aircraft - Specification | 0 | ---- | Download | |
| 47 | IS 15471 : 2012/ISO 8641:2008 (1 Revision) |
Aerospace - Self - Locking nuts with maximum operating temperature greater than 425°C - Procurement specification (First Revision) | 0 | ---- | Buy | |
| 48 | IS 16000 : 2004 |
Aerospace quality management systems - Requirements | 0 | ---- | Download | |
| 49 | IS 16883 : 2022/ISO 21350: 2023 |
Enclosures for protection against ionizing radiation - Lead shielding units for 50 mm and 100 mm thick wall | 0 | ---- | Buy | |
| 50 | IS 17095 : 2019/ISO 16682:2015 |
Aerospace series - Terminology for clamping devices | 0 | ---- | Buy | |
| 51 | IS 17148 : Part 5 : 2022 |
Performance characteristics of automated measuring systems Part 5: Determination of the mass concentration of ammonia in flue gas from Stationary Sources | 0 | ---- | Download | |
| 52 | IS 17544 : 2022/ISO 14621-1:2019 |
Multilayer (PE-AL-PE) Plastic Piping Systems for Indoor Gas Installations with a Maximum Operating Pressure up to and Including 500 kPa (5 bar) - Specification | 0 | ---- | Buy | |
| 53 | IS 17755 : 2022/ISO 21351: 2005 |
CONSORTIA OF MICROBIAL INOCULANTS (MIXED BIOFERTILIZER INOCULANTS) – SPECIFICATION | 0 | ---- | Buy | |
| 54 | IS 17813 : 2022/ISO 27025: 2010 |
Multi Layer (Polyethylene-Stainless Steel) Stainless Steel Pliable Corrugated Gas Tubing Kits in Buildings (Indoor and Outdoor) with an Operating Pressure up to 5 kg/cm² ( 5 bar ) ― Specification | 0 | ---- | Buy | |
| 55 | IS 17814 : 2022/ISO 10789:2011 |
Corrugated Metal Flexible Safety Gas Hose Assemblies Specification | 0 | ---- | Buy | |
| 56 | IS 18178 : 2023/ISO 16192: 2024 |
Kantakari Solanum surattense Burm f Whole plant for use in Traditional Medicine Specification | 0 | ---- | Buy | |
| 57 | IS/ISO/TS 22318 : 2021/ISO 14300-1: 2023 (1 Revision) |
Security and resilience - Business continuity management systems - Guidelines for supply chain continuity management First Revision | 0 | ---- | Buy | |
| 58 | IS 4665 : Part 2 : Sec 1 : 2023/ISO 15865: 2022 |
Hand-Held Motor-Operated Electric Tools Safety Part 2 Particular requirements Section 1 drills and impact drills | 0 | ---- | Buy | |
| 59 | IS 4665 : Part 2 : Sec 2 : 2023/ISO 16091: 2018 |
Hand-held motor-operated electric tools - Safety - Part 2 Particular requirements Section 2 screwdrivers and impact wrenches | 0 | ---- | Buy | |
| 60 | IS 4972 : Part 3 : 2022/ISO 10794: 2018 |
Resistance Spot Welding Part 3 Electrode Holders — Parallel Shank Fixing For End Thrust (First revision of IS 4972) | 0 | ---- | Buy | |
| 61 | IS 4972 : Part 8 : 2022/ISO 14300-2:2011 |
Resistance spot welding Part 8 Materials for electrodes and ancillary equipment (First Revision of IS 4972) | 0 | ---- | Buy | |
| 62 | IS 5432 : 2022/ISO 14621-2:2019 (2 Revision) |
POWDER METALLURGY-VOCABULARY | 0 | ---- | Buy | |
| 63 | IS/IEC 60695 : Part 2 : Sec 13 : 2021 (1 Revision) |
Fire Hazard Testing Part 2 GlowingHot wire based test methods Section 13 Glow-wire ignition temperature GWIT test method for materials | 0 | ---- | Download | |
| 64 | IS 6722 : 1972 |
Dimensions for aircraft jacking pads | 0 | ---- | Buy | |
| 65 | IS 6723 : 1972 |
Recommendations for aircraft instrument dials and pointers | 0 | ---- | Buy | |
| 66 | IS 6725 : 2008/ISO 245:1998 (1 Revision) |
Aerospace - Lockwire - Diameters (First Revision) | 1 | ---- | Buy | |
| 67 | IS 6741 : 1972 |
Numerals for aircraft instrument dials and number plates | 0 | ---- | Buy | |
| 68 | IS 6742 : 2013/ISO 43 : 1976 (1 Revision) |
Aircraft - Jacking pads (First Revision) | 0 | ---- | Buy | |
| 69 | IS 6743 : 1972 |
Sizes and mounting dimensions of aircraft instrument cases (Rear - Mounting Type) | 0 | ---- | Buy | |
| 70 | IS 6753 : 1972 |
Code for identification of aircraft pipelines | 0 | ---- | Buy | |
| 71 | IS 6800 : 1972 |
Dimensions for aircraft tow bar connections to tractors | 0 | ---- | Buy | |
| 72 | IS 7131 : 2022/ISO 14620-1: 2018 (1 Revision) |
Nitrophosphate Based Granulated Fertilizers | 0 | ---- | Buy | |
| 73 | IS 7438 : 2022/ISO 16290: 2013 (2 Revision) |
Metallic powders Determination of acid-insoluble content in iron copper tin and bronze powders | 0 | ---- | Buy | |
| 74 | IS 7828 : 2008/ISO 102:1990 (1 Revision) |
Aircraft - Gravity filling orifices (First Revision) | 0 | ---- | Buy | |
| 75 | IS 7829 : 1975 |
Marking of aircraft gas cylinders | 0 | ---- | Buy | |
| 76 | IS 7831 : 1975 |
Dimensions of aircraft lubricating nipples | 0 | ---- | Buy | |
| 77 | IS 7832 : 1975 |
Dimensions for aircraft connections for ground air - Conditioning | 0 | ---- | Buy | |
| 78 | IS 7855 : 2011/ISO/TR 224 : 1998 (1 Revision) |
Aircraft - Declaration of design and performance for aircraft equipment - Standard form (First Revision) | 0 | ---- | Buy | |
| 79 | IS 8141 : 1976 |
Tolerances for screw threads used in aeronautics | 0 | ---- | Download | |
| 80 | IS 8252 : Part 4 : 1980 |
Environmental tests for aircraft equipment: Part 4 ice formatiOn | 0 | ---- | Download | |
| 81 | IS 8252 : Part 10 : 1979 |
Environmental tests for aircraft equipment: Part 10 salt mist | 0 | ---- | Download | |
| 82 | IS 8252 : Part 21 : 1986 |
Environmental tests for aircraft equipment: Part 21 explosion proofness | 0 | ---- | Download | |
| 83 | IS 8252 : Part 3 : 1978 |
Environmental tests for aircraft equipment: Part 3 humidity (24 - Hour Cycle) | 0 | ---- | Download | |
| 84 | IS 8252 : Part 1 : 1976 |
Environmental tests for aircraft equipment: Part 1 general | 0 | ---- | Download | |
| 85 | IS 8252 : Part 14 : 1982 |
Environmental tests for aircraft equipment: Part 14 mechanical vibration | 0 | ---- | Download | |
| 86 | IS 8252 : Part 8 : 1979 |
Environmental tests for aircraft equipment: Part 8 change of temperature | 0 | ---- | Download | |
| 87 | IS 8252 : Part 11 : 1976 |
Environmental - Tests for aircraft - Equipment: Part 11 differential pressure | 0 | ---- | Download | |
| 88 | IS 8252 : Part 6 : 1976 |
Environmental tests for aircraft equipment: Part 6 waterproofness | 0 | ---- | Download | |
| 89 | IS 8252 : Part 18 : 1986 (1 Revision) |
Environmental tests for aircraft equipment: Part 18 magnetic influence (First Revision) | 0 | ---- | Download | |
| 90 | IS 8252 : Part 2 : 1980 |
Environmental tests for aircraft equipment: Part 2 temperature, pressure and humidity | 0 | ---- | Download | |
| 91 | IS 8396 : 1977 |
Specification for air cargo base sandwich panel | 0 | ---- | Download | |
| 92 | IS 8521 : Part 2 : 2022/ISO 10789: 2011 (1 Revision) |
Eye and face protection for occupational use : Part 2 Additional requirements for mesh protectors (First Revision) | 0 | ---- | Buy | |
| 93 | IS 8946 : 1978 |
General requirements for rotating electrical machinery for aircraft | 0 | ---- | Download | |
| 94 | IS 9086 : 2003 (1 Revision) |
Aerospace - Universal head aluminium alloy rivets - Specification (First Revision) | 0 | ---- | Buy | |
| 95 | IS 9087 : 2000 (1 Revision) |
Aircraft - 100° countersunk aluminium alloy rivets - Specification (First Revision) | 1 | ---- | Download | |
| 96 | IS 9088 : 1979 |
Specification for universal head nickel alloy rivets for aircraft | 0 | ---- | Download | |
| 97 | IS 9089 : 2004 (2 Revision) |
Aircraft - Aluminium and wrought aluminium alloy rivets - General requirements (Second Revision) | 0 | ---- | Download | |
| 98 | IS 9093 : 1979 |
Specification for 100 degree countersunk nickel alloy rivets for aircraft | 0 | ---- | Download | |
| 99 | IS 9174 : 1979 |
Dimensions for single - Hole mounted lever - Operated switches for aircraft | 0 | ---- | Download | |
| 100 | IS 9204 : 1979 |
Marking of servicing, maint - Enance, ground handling and safety/hazard points on aircraft | 0 | ---- | Download | |
| 101 | IS 9426 : 2023/ISO 17666: 2016 (1 Revision) |
Guidelines for procurement of hides and skins | 0 | ---- | Buy | |
| 102 | IS 9447 : 2023/ISO 11231: 2019 (1 Revision) |
Assessment of Seepage Losses in Canals by Analytical method- Guidelines ( first revision) | 0 | ---- | Buy | |
| 103 | IS 9624 : 1980 |
Design criteria for aircraft passenger seats and berths | 0 | ---- | Download | |
| 104 | IS 9662 : Part 1 : 2023/ISO 21349: 2023 (1 Revision) |
Code of practice for construction and assembly of leather sealing cups Part I U cups First Revision | 0 | ---- | Buy | |
| 105 | IS 9671 : 1980 |
Specification for frequency weighting for the measurement of aircraft noise (D - Weighting) | 0 | ---- | Download |