Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Sub Group : Fastners )
Total Standards : 59
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10238 : 2001 (1 Revision) |
Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision) | 0 | ---- | Download | |
| 2 | IS 10248 : PART 2 : 2011/ISO 8735 : 1997 (1 Revision) |
Parallel pins with internal thread: Part 2 hardened steel and martensitic stainless steel (First Revision) | 0 | ---- | Buy | |
| 3 | IS 10248 : PART 1 : 2011/ISO 8733 : 1997 (1 Revision) |
Parallel pins with internal thread: Part 1 unhardened steel and austenitic stainless steel (First Revision) | 0 | ---- | Buy | |
| 4 | IS/ISO 10683 : 2018/ISO 10683 : 2018 |
Fasteners - Non-Electrolytically Applied Zinc Flake Coating Systems | 0 | ---- | Buy | |
| 5 | IS 11536 : 2022/ISO 3506-4 : 2009 (3 Revision) |
Processed Cereal Based Complementary Foods ? Specification ( Third Revision ) | 1 | ---- | Buy | |
| 6 | IS 12427 : 2001 (1 Revision) |
Fasteners - Threaded steel fasteners - Hexagon head transmission tower bolts - Specification (First Revision) | 0 | ---- | Download | |
| 7 | IS 12952 : 2005/ISO 8740:1997 (1 Revision) |
Grooved pins - Full - Length parallel grooved, with chamfer (First Revision) | 0 | ---- | Buy | |
| 8 | IS 12982 : 1991/ISO 8749 : 1986 |
Pins and grooved pins - Shear test | 0 | ---- | Buy | |
| 9 | IS 1363 : Part 3 : 2018/ISO 4034 : 2012 (5 Revision) |
Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision ) | 0 | ---- | Buy | |
| 10 | IS 1364 : Part 3 : 2018/ISO 4032 (5 Revision) |
Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 ) | 0 | ---- | Buy | |
| 11 | IS 1367 : Part 5 : 2018/IS 1367 Part 5 (4 Revision) |
Technical supply conditions for threaded steel fasteners: Part 5 mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (Fourth Revision) | 0 | ---- | Buy | |
| 12 | IS 1367 : Part 14 : Sec 3 : 2018/ISO 3506-3 : 2009 (4 Revision) |
Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless steel fasteners section 3 set screws and similar fasteners not under tensile stress (Fourth Revision | 0 | ---- | Buy | |
| 13 | IS 1367 : Part 13 : 2020/ISO 10684 : 2004 (3 Revision) |
Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision ) | 0 | ---- | Buy | |
| 14 | IS 1367 : Part 8 : 2020/ISO 2320 : 2015 (5 Revision) |
Technical Supply Conditions for Threaded Steel Fasteners Part 8 Prevailing Torque Type Steel Nuts — Functional Properties ( Fifth Revision ) | 0 | ---- | Buy | |
| 15 | IS 1367 : Part 3 : 2017/ISO 898-1 : 2013 (5 Revision) |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) | 0 | ---- | Buy | |
| 16 | IS 1368 : 2018/ISO 4753 : 2011 (4 Revision) |
Dimensions for ends of parts with external ISO metric threads (Fourth Revision) | 0 | ---- | Buy | |
| 17 | IS 14394 : 1996 |
Industrial fasteners - Hexagon nuts of product grade C - Hot - Dip galvanized - Specification (Size Range M12 To M36) | 0 | ---- | Download | |
| 18 | IS 14962 : Part 1 : 2018/ISO 965-1 : 2013 (1 Revision) |
ISO general purpose metric screw threads - Tolerances: Part 1 principles and basic data (First Revision) | 0 | ---- | Buy | |
| 19 | IS 15581 : 2018/ISO 4161 : 2012 (1 Revision) |
Hexagon nuts with flange, style 2 - Coarse thread (First Revision) | 0 | ---- | Buy | |
| 20 | IS 15582 : 2018/ISO 4162 : 2012 (1 Revision) |
Hexagon Bolts with Flange - Small Series - Product Grade A with Driving Feature of Product Grade B ( First Revision) | 0 | ---- | Buy | |
| 21 | IS/ISO 16426 : 2002/ISO 16426 |
Fasteners - Quality assurance system | 0 | ---- | Buy | |
| 22 | IS 17003 : Part 13 : 2022/ISO 7051 : 2011 |
Nanotechnologies Vocabulary Part 13: Graphene and related two-dimensional 2D materials | 0 | ---- | Buy | |
| 23 | IS 17018 : Part 1 : 2022 (2 Revision) |
Solar Photovoltaic Water Pumping Systems Part 1 Centrifugal Pumps Specification | 0 | ---- | Download | |
| 24 | IS 17445 : 2020/ISO 15330 : 1999 |
Fasteners — Preloading Test for the Detection of Hydrogen Embrittlement — Parallel Bearing Surface Method | 0 | ---- | Buy | |
| 25 | IS 17802 : Part 2 : 2022/ISO 15480:2019 |
Accessibility for the ICT Products and Services Part 2: Determination of Conformance | 0 | ---- | Buy | |
| 26 | IS 17875 : 2022/ISO 15482:1999 |
Stainless Steel seamless pipes and tubes for general service | 0 | ---- | Buy | |
| 27 | IS 17876 : 2022/ISO 15483:1999 |
Stainless steel welded pipes and tubes for general service | 0 | ---- | Buy | |
| 28 | IS 19013 : 2022 |
Iso Nonyl Alcohol - Specification | 0 | ---- | Download | |
| 29 | IS/ISO 20140 : Part 5 : 2017/ISO 7721-2: 1990 |
Automation systems and integration Evaluating energy efficiency and other factors of manufacturing systems that influence the environment Part 5: Environmental performance evaluation data | 0 | ---- | Buy | |
| 30 | IS 2079 : 2022 (3 Revision) |
GRAPHITE FOR PENCIL SLIPS - SPECIFICATION (Second Revision) | 0 | ---- | Download | |
| 31 | IS 2609 : 1972 (1 Revision) |
Specification for coach bolts (First Revision) | 2 | ---- | Download | |
| 32 | IS 3458 : 2018/ISO 1119 : 2011 (3 Revision) |
Conical tapers and taper angles for general engineering purposes (Third Revision) | 0 | ---- | Buy | |
| 33 | IS 4206 : 2012/ISO 888 : 2012 (2 Revision) |
Dimensions for nominal lengths and thread lengths for bolts, screws and studs (Second Revision) | 0 | ---- | Buy | |
| 34 | IS/ISO 5408 : 2009/ISO 5408 : 2009 |
Screw threads - Vocabulary | 0 | ---- | Buy | |
| 35 | IS/ISO/TS 55010 : 2019/ISO 22081 : 2021 |
Asset Management Guidance on the alignment of financial and non- financial functions in asset management | 0 | ---- | Buy | |
| 36 | IS 5502 : 2023/ISO 16048 : 2003 (3 Revision) |
SMOOTH-WHEELED DIESEL ROAD ROLLER - GENERAL REQUIREMENTS Third Revision | 0 | ---- | Buy | |
| 37 | IS 582 : Part 11 : Sec 1 : 2022/ISO 7050 : 2011 |
METHODS OF CHEMICAL TESTING OF LEATHER Part 11 Determination of chromium(VI) content in leather Section 1: Colorimetric method | 0 | ---- | Buy | |
| 38 | IS 6101 : 2018/ISO 1580 : 2011 (3 Revision) |
Slotted pan head screws - Product grade a (Third Revision) | 0 | ---- | Buy | |
| 39 | IS 6732 : 1972 |
Specification for double point nails | 0 | ---- | Download | |
| 40 | IS 7002 : 2018/ISO 7040 : 2012 (3 Revision) |
Prevailing torque type hexagon regular nuts (With Non - Metallic Insert) - Property classes 5, 8 and 10 (Third Revision) | 0 | ---- | Buy | |
| 41 | IS 7169 : 2018/ISO 1483 : 2011 (2 Revision) |
Slotted raised countersunk (Oval) head tapping screws (Second Revision) | 0 | ---- | Buy | |
| 42 | IS 7170 : 2018/ISO 1482 : 2011 (2 Revision) |
Slotted countersunk (Flat) head tapping screws (Second Revision) | 0 | ---- | Buy | |
| 43 | IS 7173 : 2018/ISO 1481 : 2011 (2 Revision) |
Slotted pan head tapping screws (Second Revision) | 0 | ---- | Buy | |
| 44 | IS 7178 : 2018/ISO 2702 : 2011 (4 Revision) |
Heat - Treated steel tapping screws - Mechanical properties (Fourth Revision) | 0 | ---- | Buy | |
| 45 | IS 7483 : 2018/ISO 7045 : 2011 (3 Revision) |
Pan Head Screws With Type H or Type Z Cross Recess - Product Grade A (Third Revision) | 0 | ---- | Buy | |
| 46 | IS 7485 : Part 1 : 2018/ISO 7046-1 : 2011 (3 Revision) |
Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess - Product Grade A Part 1 Steel Screws of Property Class 4.8 ( Third Revision) | 0 | ---- | Buy | |
| 47 | IS 7485 : Part 2 : 2018/ISO 7046-2 : 2011 (3 Revision) |
Countersunk flat head screws (common head style) with type H or Type Z Cross Recess - Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non - Ferrous Metal Screws ( Third Revision) | 0 | ---- | Buy | |
| 48 | IS 7486 : 2018/ISO 7047 : 2011 (3 Revision) |
Raised countersunk head screws (Common Head Style) with type H or type Z cross recess - Product grade A (Third Revision) | 0 | ---- | Buy | |
| 49 | IS 7790 : 1991 (1 Revision) |
Domed cap nuts - Specification (First Revision) | 0 | ---- | Download | |
| 50 | IS 802 : Part 6 : 2022 |
Use of Structural Steel in Overhead Transmission Line Towers — Code of Practice Part 6 Tower Erection | 0 | ---- | Download | |
| 51 | IS 8033 : 1976 |
Specification for round washers with square hole for wood fastenings | 2 | ---- | Download | |
| 52 | IS 8412 : 1977 |
Specification for slotted countersunk head bolts for steel structures | 0 | ---- | Download | |
| 53 | IS 8535 : 2020/ISO 1891 : 2009 (2 Revision) |
Fasteners — Terminology ( Second Revision ) | 0 | ---- | Buy | |
| 54 | IS 8822 : 1978 |
Specification for slotted mushroom head roofing bolts | 0 | ---- | Download | |
| 55 | IS 8911 : 2018/ISO 2010 : 2011 (2 Revision) |
Slotted raised countersunk head screws - Product grade A (Second Revision) | 0 | ---- | Buy | |
| 56 | IS 9519 : 2005/ISO 272:1982 (1 Revision) |
Fasteners - Hexagon products - Width across flats (First Revision) | 0 | ---- | Buy | |
| 57 | IS 9549 : Part 2 : 2014 (1 Revision) |
Fasteners - Bolts, screws and studs - Head slots for bolts (First Revision) | 0 | ---- | Download | |
| 58 | IS 9549 : Part 1 : 2014/ISO 7378 : 1983 (1 Revision) |
Fasteners -- Bolts, screws and studs: Part 1 Split pin holes and wire holes (first revision) | 0 | ---- | Buy | |
| 59 | IS 9965 : 1981 |
Limits of sizes for ISO metric external screw threads for high temperature applications | 0 | ---- | Download |