Draft Under Wide Circulation

Bureau of Indian Standards establishes Indian Standards in relation to any article or process and amends, revises or cancels the standards so established as may be necessary, by a process of consultation involving consumers, manufacturers, Government and regulatory bodies, technologists, scientists and testing laboratories through duly constituted committees of the Bureau.

The experts form a technical committee which specializes in a specific subject area. They begin the process with the development of a draft that would cater to the needs of market as well as consumers. The committee strives to compile a draft which not only sets high standards for the subject dealt with, but also aims at improving suitability and acceptability of the end result. This draft is duly approved by the Committee and is issued in draft form and widely circulated for a period of not less than one month amongst the various interests concerned for critical review and suggestions for improvement. The wide circulation may be waived if so decided by the Sectional Committee where the matter is urgent or non-controversial.

This interface facilitates in accessing all the draft Indian standards under wide-circulation for comments. A link is provided for the users to comment on any existing Indian Standard or draft under wide-circulation. Users can comment as well as monitor the progress of their comments using this interface.


  
SNo. Department Document No Title of Document ICS No. Last Date for
Comment
Comment
1 MTDMTD 19 (13093) Hollow steel sections for structural use - Specification (Second Revision) Amendment - 2 --07-12-2019
2 ETDETD 44 (13533)Safety of machinery - Electro-sensitive protective equipment - Part 4-2: Particular requirements for equipment using vision based protective devices VBPD - Additional requirements when using reference pattern techniques VBPDPP ICS 13.110; 29.260.9907-12-2019
3 MEDMED 16 (13561)VALVE FITTINGS FOR COMPRESSED GAS CYLINDERS EXCLUDING LIQUEFIED PETROLEUM GAS LPG CYLINDERS SPECIFICATION Fourth Revision of IS 3224 23.020.30, 23.060.0102-12-2019
4 FADFAD 8 (13848)PHOSPHORIC ACID FOOD GRADE SPECIFICATION 67.220.2022-11-2019
5 CHDCHD 19 (14242)SAFETY CANVAS BOOTS FOR MINERS SPECIFICATION Seventh Revision ICS 13.340.50 20-11-2019
6 MEDMED 24 (14251)Book Room Doors Specification 13.31007-01-2020
7 MEDMED 24 (14252)Draft Standard on Key locks for security Equipment-Specification 13.31007-01-2020
8 PGDPGD 33 (14508)Textile conveyor belts - Full thickness tensile strength elongation at break and elongation at the reference load- Test method 53. 040. 2019-11-2019
9 PGDPGD 33 (14509)Conveyor belts Test atmospheres and conditioning periods 53. 040. 2019-11-2019
10 TXDTXD 30 (14519)Geosynthetics - Geotextiles Used in Subgrade Stabilization in Pavement Structures - Specification ICS 59.080.70 23-11-2019
11 TXDTXD 30 (14520)Geosynthetics - Guidelines for Installation of Geotextile used in Sub-Grade Separation in Pavement Structures ICS 59.080.70 23-11-2019
12 PGDPGD 14 (14522)Slide fasteners general purpose ICS 61.040; 83.140.0119-11-2019
13 PGDPGD 18 (14610)Data quality Part 1: Overview ICS 01.06024-12-2019
14 PGDPGD 18 (14612)Data quality Part 2: Vocabulary ICS 01.06024-12-2019
15 PGDPGD 18 (14613)Data quality Part 8: Information and data quality: Concepts and measuring ICS 01.06024-12-2019
16 PGDPGD 18 (14614)Data quality Part 60: Data quality management: Overview ICS 01.06024-12-2019
17 PGDPGD 18 (14615)Data quality Part 61: Data quality management: Process reference model ICS 01.06024-12-2019
18 PGDPGD 18 (14616)Data quality Part 62: Data quality management: Organizational process maturity assessment: Application of standards relating to process assessment ICS 01.06024-12-2019
19 PGDPGD 18 (14617)Data quality Part 100: Master data: Exchange of characteristic data: Overview ICS 01.06024-12-2019
20 PGDPGD 18 (14618)Data quality Part 110: Master data: Exchange of characteristic data: Syntax semantic encoding and conformance to data specification ICS 01.06024-12-2019
21 PGDPGD 18 (14619)Data quality Part 115: Master data: Exchange of quality identifiers: Syntactic semantic and resolution requirements ICS 01.06024-12-2019
22 PGDPGD 18 (14620)Data quality Part 116: Master data: Exchange of quality identifiers: Application of ISISO 8000-115 to authoritative legal entity identifiers ICS 01.06024-12-2019
23 PGDPGD 18 (14621)Data quality Part 120: Master data: Exchange of characteristic data: Provenance ICS 01.06024-12-2019
24 PGDPGD 18 (14622)Data quality Part 130: Master data: Exchange of characteristic data: Accuracy ICS 01.06024-12-2019
25 PGDPGD 18 (14623)Data quality Part 140: Master data: Exchange of characteristic data: Completeness ICS 01.06024-12-2019
26 PGDPGD 18 (14624)Data quality Part 150: Master data: Quality management framework ICS 01.06024-12-2019
27 PGDPGD 27 (14641)PERSONAL FALL-ARREST SYSTEMS PART 1: FULL-BODY HARNESSES ICS 13.340.9919-11-2019
28 PGDPGD 27 (14643)PERSONAL FALL-ARREST SYSTEMS PART 2: LANYARDS AND ENERGY ABSORBERS ICS 13.340.9919-11-2019
29 PGDPGD 27 (14644)PERSONAL FALL-ARREST SYSTEMS PART 3: SELF-RETRACTING LIFELINES ICS 13.340.9919-11-2019
30 PGDPGD 27 (14645)PERSONAL FALL-ARREST SYSTEMS PART 4: VERTICAL RAILS AND VERTICAL LIFELINES INCORPORATING A SLIDING-TYPE FALL ARRESTER ICS 13.340.9919-11-2019
31 PGDPGD 27 (14646)PERSONAL FALL-ARREST SYSTEMS PART 5: CONNECTORS WITH SELF-CLOSING AND SELF-LOCKING GATES ICS 13.340.9919-11-2019
32 PGDPGD 27 (14647)PERSONAL FALL-ARREST SYSTEMS PART 6: SYSTEM PERFORMANCE TESTS ICS 13.340.9919-11-2019
33 MEDMED 10 (14697)Steel wire ring net panels Definitions and Specifications Adoption of ISO 17745 77.140.6525-11-2019
34 MEDMED 10 (14698)Steel wire rope net panels Definitions and Specifications Adoption of ISO 17746 77.140.6525-11-2019
35 PGDPGD 37 (14705)Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized coatings on threaded fasteners Third Revision of IS 1367Part 13ISO 10684:2004 ICS 21.060.01; 25.220.4029-11-2019
36 LTDLTD 5 (14706)Preferred number series for Resistors and Capacitors 31.040; 31.06026-11-2019
37 LTDLTD 5 (14707)Passive filter units for electromagnetic interference suppression Part 1 Generic specification First Revision and Superseding 1 IS 3723Part 1:1978 2 IS 3723Part 2:1983 and 3 IS 3723Part 3:1983 31.16026-11-2019
38 LTDLTD 5 (14708)Passive filter units for electromagnetic interference suppression Part 2 Sectional specification Passive filter units for which safety tests are appropriate Test methods and general requirements First Revision of IS 13247 Part 2 31.16002-12-2019
39 LTDLTD 5 (14709)Semiconductor devices - Integrated circuits : Part 2 Digital integrated circuits essential ratings and characteristics Sec 1 General 31.20026-11-2019
40 PGDPGD 37 (14710)Fasteners Non-Electrolytically Applied Zinc Flake Coating Systems Adoption of ISO 10683 : 2018 ICS 2106001 2522040 ICS 21.060.01; 25.220.4029-11-2019
41 LTDLTD 5 (14711)Semiconductor devices Integrated circuits Part 3 Analogue integrated circuits Superseding 1 IS 12970Part 5Sec 1:1991 2 IS 12970Part 5Sec 2:1992 3 IS 12970Part 5Sec 3:1992 4 IS 12970Part 5Sec 4:1992 5 IS 12970Part 5Sec 5:1993 6 IS 12970Part 5Sec 31.20026-11-2019
42 PGDPGD 37 (14724)Fasteners Preloading Test for the Detection of Hydrogen Embrittlement Parallel Bearing Surface Method Adoption of ISO 15330:1999 ICS 2106001 ICS 21.060.0129-11-2019
43 PCDPCD 19 (14755)Light Liquid Paraffin for Cosmetic Industry - Specification Second Revision of IS 7299 75.100 02-12-2019
44 TXDTXD 40 (14761)Textile glass -- Determination of combustible-matter content 59.100.1001-01-2020
45 TXDTXD 40 (14762)Reinforcement fibres -- Woven fabrics -- Basis for a specification 59.100.0101-01-2020
46 TXDTXD 40 (14763)Textile glass -- Rovings -- Basis for a specification 59.100.1031-12-2019
47 TXDTXD 40 (14764)Textile glass -- Yarns -- Basis for a specification 59.100.1031-12-2019
48 TXDTXD 40 (14765)Textile glass -- Chopped-strand and continuous-filament mats -- Determination of average thickness thickness under load and recovery after compression 59.100.1031-12-2019
49 TXDTXD 40 (14766)Reinforcement fabrics -- Determination of conventional flexural stiffness -- Fixed-angle flexometer method 59.100.0131-12-2019
50 TXDTXD 40 (14767)Textile glass -- Woven fabric -- Determination of tensile breaking force and elongation at break by the strip method 59.100.1031-12-2019
51 TXDTXD 40 (14768)Textile glass -- Mats and fabrics -- Determination of contact mouldability 59.100.1031-12-2019
52 TXDTXD 40 (14769)Reinforcement products -- Woven fabrics -- Determination of width and length 59.100.0131-12-2019
53 TXDTXD 40 (14770)Textile glass -- Textured yarns -- Basis for a specification 59.100.1031-12-2019
54 TXDTXD 40 (14771)Reinforcement materials -- Tubular braided sleeves -- Basis for a specification 59.100.0131-12-2019
55 TXDTXD 40 (14772)Reinforcement materials -- Braided tapes -- Basis for a specification 59.100.0131-12-2019
56 TXDTXD 40 (14773)Carbon fibre -- Determination of volume resistivity 59.100.2031-12-2019
57 TXDTXD 40 (14774)Textile - glass rovings -- Determination of solubility of size 59.100.1031-12-2019
58 FADFAD 23 (14777)Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products Part 2 Construct-specific real-time PCR method for detection of event FP967 in linseed and linseed products 67.05030-11-2019
59 FADFAD 23 (14778)Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products Part 3 Construct-specific real-time PCR method for the detection of the P35S-pat–sequence for screening for compounds of genetically modified organisms 67.05030-11-2019
60 FADFAD 23 (14779)Horizontal methods for molecular biomarker analysis Methods of analysis for the detection of genetically modified organisms and derived products Part 5 Real-time PCR based screening method for the detection of the FMV promoter P-FMV DNA sequence 67.05030-11-2019
61 FADFAD 23 (14780)Horizontal methods for molecular biomarker analysis Methods of analysis for the detection of genetically modified organisms and derived products Part 6 Real-time PCR based screening methods for the detection of cry1AbAc and Pubi-cry DNA sequences 67.05030-11-2019
62 FADFAD 19 (14781)Milk – Determination of alkaline phosphatase Part 2 Reference Method (Adoption of ISO 3356:2009) 67.100.01 30-11-2019
63 FADFAD 13 (14786)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART I SAMPLING, PHYSICAL AND CHEMICAL TESTS SECTION 1 SAMPLING 67.200.1002-12-2019
64 FADFAD 13 (14787)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 1 SAMPLING PHYSICAL AND CHEMICAL TESTS SECTION 2 PHYSICAL AND CHEMICAL TESTS 67.200.1002-12-2019
65 FADFAD 15 (14788)Microbiology of the food chain - Horizontal method for Detection and Enumeration of Listeria Monocytogenes and Listeria spp : Part 1 Detection Method ICS 07.100.3003-12-2019
66 FADFAD 13 (14789)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 1 DETERMINATION OF FATTY ACID PROFILE 67.200.1002-12-2019
67 FADFAD 15 (14790)Microbiology of the food chain Horizontal method for detection and enumeration of Listeria Monocytogenes and of Listeria spp Part 2 Enumeration method ICS 07.100.3003-12-2019
68 MTDMTD 33 (14791)Nanotechnologies- Nanoscale calcium carbonate in powder form-Characteristics and Measurement 07.03006-12-2019
69 CEDCED 43 (14796)Methods of test for soils: Part 1 Preparation of dry soil samples for various tests [third revision of IS 2720 (Part 1)] 93.02031-12-2019
70 CEDCED 43 (14797)Methods of test for soils: Part 2 Determination of water content [third revision of IS 2720 (Part 2)] 93.020, 13.080.2031-12-2019
71 MEDMED 8 (14801)Gas Testing Flame Safety Lamps second revision 73.10009-12-2019
72 PGDPGD 8 (14803)Hand-held non-electric power tools Safety requirements Part 1: Assembly power tools for non-threaded mechanical fasteners ICS 25.140.1024-12-2019
73 FADFAD 28 (14806) Infant Formula and Adult Nutritionals Determination of Trans and Total cis trans Vitamin K1 Content Normal Phase HPLC 67.05008-12-2019
74 PGDPGD 8 (14807)Hand-held non-electric power tools Safety requirements Part 2: Cutting-off and crimping power tools ICS 25.140.1024-12-2019
75 PGDPGD 8 (14809)Hand-held non-electric power tools Safety requirements Part 3: Drills and tappers ICS 25.140.1024-12-2019
76 FADFAD 28 (14810)Food Products Determination of the Total Nitrogen Content by Combustion According to the Dumas Principle and Calculation of the Crude Protein Content : Cereals Pulses and Milled Cereal Products 67.050; 67.06008-12-2019
77 PGDPGD 8 (14813)Hand-held non-electric power tools - Safety requirements Part 4: Non-rotary percussive power tools ICS 25.140.1024-12-2019
78 TXDTXD 36 (14814)MEDICAL TEXTILES – ADHESIVE INCISE, PRE-OPERATIVE ADHESIVE AND TRANSPARENT DRAPES - SPECIFICATION 11.040.30; 59.080.0124-11-2019
79 MTDMTD 3 (14815)Metallic Materials -Vickers Hardness Test Part 1 Test Method 77.040.1022-11-2019
80 TXDTXD 36 (14816)Medical Textiles Disposable shoe cover Specification 11.040.30; 59.080.0124-11-2019
81 MTDMTD 3 (14817)Metallic Materials - Vickers Hardness Test Part 2 Verification and calibration of testing machines 77.040.1022-11-2019
82 MTDMTD 3 (14819)Metallic Materials - Vickers Hardness Test Part 3 Calibration of reference Blocks 77.040.1022-11-2019
83 TXDTXD 36 (14822)Medical Textiles Abdominal binder Specification 11.040.30; 59.080.0124-11-2019
84 TXDTXD 36 (14823)Medical Textiles Dressing Shell compressed Specification 11.040.30; 59.080.0124-11-2019
85 TXDTXD 36 (14824)Medical Textiles — Dressing, wound care occlusive with flexible foam padding for optimum healing — Specification 11.040.30; 59.080.0124-11-2019
86 MTDMTD 3 (14825)Metallic Materials - Vickers Hardsness Test Part 4 Tables of Hardness Values 77.040.1022-11-2019
87 TXDTXD 36 (14826)Medical Textiles Anti-embolic stocking for post op use upto thigh medium Specification 11.040.30; 59.080.0124-11-2019
88 TXDTXD 36 (14827)Medical Textiles Pressure garment Specification 11.040.30; 59.080.0124-11-2019
89 TXDTXD 36 (14828)Medical Textiles Napkin absorbent dental disposable Specification 11.040.30; 59.080.0124-11-2019
90 PGDPGD 8 (14831)Hand-held non-electric power tools Safety requirements Part 5: Rotary percussive drills ICS 25.140.1024-12-2019
91 PGDPGD 8 (14835)Hand-held non-electric power tools Safety requirements Part 6: Assembly power tools for threaded fasteners ICS 25.140.1024-12-2019
92 MTDMTD 3 (14836)Metallic Materials Calibration of Extensometers Used in Uniaxial Testing ICS 77.040.1001-12-2019
93 PGDPGD 8 (14837)Hand-held non-electric power tools - Safety requirements Part 7: Grinders ICS 25.140.1024-12-2019
94 PGDPGD 8 (14838)Hand-held non-electric power tools Safety requirements Part 8: Sanders and polishers ICS 25.140.1024-12-2019
95 PGDPGD 8 (14839)Hand-held non-electric power tools Safety requirements Part 9: Die grinders ICS 25.140.1024-12-2019
96 PGDPGD 8 (14840)Hand-held non-electric power tools Safety requirements Part 10: Compression power tools ICS 25.140.1024-12-2019
97 PGDPGD 8 (14841)Hand-held non-electric power tools Safety requirements Part 11: Nibblers and shears ICS 25.140.1024-12-2019
98 PGDPGD 8 (14842)Hand-held non-electric power tools- Safety requirements Part 12: Circular oscillating and reciprocating saws ICS 25.140.1024-12-2019
99 FADFAD 13 (14845)Animal and vegetable fats and oils Preparation of test sample 67.200.1010-12-2019
100 PCDPCD 19 (14846)Skin Powder for Infants ICS 71.100.7014-12-2019
101 FADFAD 13 (14847)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 2 DETERMINATION OF OXIDATIVE STABILITY (ACCELERATED OXIDATION TEST) (Adoption of ISO 6886 : 2016) 67.200.1010-12-2019
102 FADFAD 13 (14848)METHOD OF SAMPLING AND TEST FOR OILS AND FATS - PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 3 DETERMINATION OF THE TRIACYLGLYCEROL COMPOSITION OF FATS AND OILS BY CAPILLARY GAS CHROMATOGRAPHY (Adoption of ISO/TS 17383 : 2014) 67.200.1010-12-2019
103 FADFAD 13 (14849)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 4 DETERMINATION OF CONTENT OF POLAR COMPOUNDS (Adoption of ISO 8420 : 2002) 67.200.1010-12-2019
104 FADFAD 13 (14850)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 5 DETERMINATION OF WAX CONTENT BY GAS CHROMATOGRAPHY (Adoption of ISO/TS 23647 : 2010) 67.200.1010-12-2019
105 FADFAD 13 (14851)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 6 DETERMINATION OF PHOSPHORUS CONTENT BY COLORIMETRIC METHOD (Adoption of ISO 10540-1 : 2003) 67.200.1010-12-2019
106 FADFAD 13 (14852)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 7 DETERMINATION OF PHOSPHORUS CONTENT BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRIC METHOD (Adoption of ISO 10540-2 : 2003) 67.200.1010-12-2019
107 FADFAD 13 (14853)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 8 DETERMINATION OF PHOSPHORUS CONTENT BY METHOD USING INDUCTIVELY COUPLED PLASMA ICP OPTICAL EMISSION SPECTROSCOPY (Adoption of ISO 10540-3 : 2002) 67.200.1010-12-2019
108 FADFAD 13 (14854)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 9 DETERMINATION OF FATTY-ACID-BOUND CHLOROPROPANEDIOLS MCPDs AND GLYCIDOL BY GCMS METHOD USING FAST ALKALINE TRANSESTERIFICATION AND MEASUREMENT FOR 3-MCPD AND DIFFERENTIAL MEASUREMENT FOR GLYCIDOL (Adoption of ISO 18363-1 : 2015) 67.200.1010-12-2019
109 FADFAD 13 (14855)METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 10 DETERMINATION OF FATTY-ACID-BOUND CHLOROPROPANEDIOLS MCPDS AND GLYCIDOL BY GCMS METHOD USING SLOW ALKALINE TRANSESTERIFICATION AND MEASUREMENT FOR 2-MCPD, 3-MCPD AND GLYCIDOL (Adoption of ISO 18363-2 : 2018) 67.200.1010-12-2019
110 FADFAD 13 (14856) METHOD OF SAMPLING AND TEST FOR OILS AND FATS PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 11 DETERMINATION OF FATTY-ACID-BOUND CHLOROPROPANEDIOLS MCPDs AND GLYCIDOL BY GCMS METHOD USING ACID TRANSESTERIFICATION AND MEASUREMENT FOR 2-MCPD 3-MCPD AND GLYCIDOL (Adoption of ISO 18363-3 : 2017) 67.200.1010-12-2019
111 FADFAD 13 (14858)PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT (Adoption of ISO 17932 : 2011) 67.200.1010-12-2019
112 FADFAD 13 (14860)ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF MONOACYLGLYCEROLS, DIACYLGLYCEROLS, TRIACYLGLYCEROLS AND GLYCEROL BY HIGH-PERFORMANCE SIZE-EXCLUSION CHROMATOGRAPHY (HPSEC) (Adoption of ISO 18395 : 2005) 67.200.1010-12-2019
113 FADFAD 13 (14861)VEGETABLE FATS AND OILS - ISOMERIC DIACYLGLYCEROLS - DETERMINATION OF RELATIVE AMOUNTS OF 1,2 AND 1,3-DIACYLGLYCEROLS (Adoption of ISO 29822 : 2009) 67.200.1010-12-2019
114 PGDPGD 8 (14862)Hydraulic tools Vocabulary ICS 01.040.25; 25.140.0120-12-2019
115 PGDPGD 8 (14868)Compressors pneumatic tools and machines - Vocabulary Part 3: Pneumatic tools and machines ICS 25.140.1020-12-2019
116 TXDTXD 35 (14875)AGRO TEXTILES POLYPROPYLENE SPUN BONDED NON-WOVEN MULCH MAT FOR AGRICULTURAL AND HORTICULTURAL APPLICATIONS SPECIFICATION 59.080.30 29-11-2019
117 TXDTXD 35 (14876)AGRO TEXTILES WINDSHIELD NETS FOR AGRICULTURE AND HORTICULTURE PURPOSES SPECIFICATION 59.080.99;65.020.2029-11-2019
118 TXDTXD 35 (14877)AGRO TEXTILES HARVEST NETS FOR AGRICULTURE AND HORTICULTURE PURPOSES SPECIFICATION 59.080.99;65.020.2029-11-2019
119 TXDTXD 35 (14878)AGRO TEXTILES FENCING NETS FOR AGRICULTURE AND HORTICULTURE PURPOSES SPECIFICATION PART 1 FENCING NETS MADE FROM EXTRUDED POLYMER MESH 59.080.99;65.020.2001-12-2019
120 TXDTXD 35 (14879)AGRO TEXTILES FENCING NETS FOR AGRICULTURE AND HORTICULTURE PURPOSES SPECIFICATION PART 2 FENCING NETS MADE FROM MONO FILAMENT YARNS 59.080.99;65.020.2001-12-2019
121 MEDMED 3 (14881) Refrigerating Systems and Heat Pumps - Safety and Environmental Requirements Part 1 Definitions, Classification and Selection Criteria Amendment - 1 --17-12-2019
122 CHDCHD 15 (14887)METHODS OF TEST FOR PULP PART 11 DETERMINATION OF ACID-INSOLUBLE ASH First Revision 85.04020-11-2019
123 TXDTXD 40 (14888)Carbon fibre Determination of size content 59.100.2031-12-2019
124 CEDCED 48 (14889)Observational Method for Tunneling in Rock Messes Guidelines 93.02023-11-2019
125 CHDCHD 1 (14890) Alumino-Ferric — Specification Amendment - 2 --21-11-2019
126 FADFAD 15 (14891)Microbiology of the food chain - Preparation of test samples initial suspension and decimal dilutions for microbiological examination -- General rules for the preparation of initial suspension and decimal dilutions ICS 07.100.3022-12-2019
127 FADFAD 15 (14892)Microbiology of the food chain Preparation of test samples initial suspension and decimal dilutions for microbiological examination -- Specific rules for the preparation of fish and fishery products Adoption of ISO 6887-3:2017 ICS 07.100.3022-12-2019
128 FADFAD 15 (14893)Microbiology of the food chain Preparation of test samples initial suspension and decimal dilutions for microbiological examination -- Specific rules for the preparation of miscellaneous products Adoption of ISO 6887-4:2017 ICS 07.100.3022-12-2019
129 FADFAD 15 (14894)Microbiology of the food chain Horizontal method for the enumeration of beta-glucuronidase- positive Escherichia coli Part 1: Colony-count technique at 44 C using membranes and 5-bromo-4-chloro-3- indolyl beta-D-glucuronide 07.100.3024-12-2019
130 PCDPCD 12 (14895) Melamine (2 , 4, 6 triamino 1, 3, 5 triazine) Amendment - 1 --24-11-2019
131 FADFAD 15 (14896)Microbiology of food animal feed and water - Preparation production, storage and performance testing of culture media (Adoption of ISO 11133:2014) ICS 07.100.3024-12-2019
132 CEDCED 15 (14897)Stainless Steel Sliding Door Bolts For Use With Padlocks - Specification ICS 91.190;77.140.2030-11-2019
133 FADFAD 15 (14898)Microbiology of the food chain - Specific requirements and guidance for proficiency testing by interlaboratory comparison (Adoption of ISO 22117:2019) ICS 07.100.3024-12-2019
134 CEDCED 7 (14899)Hot Rolled Steel Beam Column Channel and Angle Sections - Dimensions and Properties 77.140.0126-11-2019
135 PCDPCD 9 (14902)Methylene Chloride dichloromethane Technical 71.080.2024-11-2019
136 PCDPCD 25 (14904)All weather antiwear hydraulic oils - Specification 75.12024-12-2019
137 FADFAD 17 (14907)IRRIGATION EQUIPMENTQUICK COUPLED POLYETHYLENE PIPES AND FITTINGS FOR SPRINKLER IRRIGATION SYSTEMS - SPECIFICATION 65.060.3524-11-2019
138 PGDPGD 38 (14908)Ghee, Vanaspati, Edible Oils and Bakery Shortenings Tins of 15 kg/litre Capacity – Specification (Third Revison) 55.120; 67.20001-12-2019
139 PGDPGD 38 (14909)Ghee, Vanaspati and Edible Oils Tins up to 10 kg/litre Capacity – Specification (Third Revision) 55.120; 67.20001-12-2019
140 CEDCED 54 (14912)Draft Indian Standard for Uncoated stress relieved low relaxation seven-wire ply strand for prestressed concrete Specification Second Revision of IS 14268 77.140.15;91.080.40 30-12-2019
141 TXDTXD 39 (14914)Textiles - Tapes cotton - Specification first revision 59.080.3031-12-2019
142 TXDTXD 39 (14915)Textiles - Braided tape for berets - Specification first revision 59.080.3031-12-2019
143 TXDTXD 39 (14916)Textiles - Cotton tapes for slide fasteners - Specification first revision 59.080.3031-12-2019
144 WRDWRD 1 (14918)Hydrometry Stage-fall discharge relationship Adoption of ISO 9123:2017 93.16001-12-2019
145 WRDWRD 1 (14919)Hydrometry Measurement in meandering river and in streams with unstable boundaries Adoption of ISO 9210:2017 93.16001-12-2019
146 WRDWRD 1 (14920)Hydrometry Liquid flow measurement using end depth method in channels with a free overfall Adoption of ISO 18481:2017 93.16001-12-2019
147 TXDTXD 36 (14922)Reusable Sanitary PadSanitary Napkin Period panties Specification 59.08006-01-2020
148 TXDTXD 36 (14923)Disposable Baby Diaper Specification 59.08006-01-2020
149 TXDTXD 36 (14924)Disposable Adult Incontinence Diaper Specification 59.08006-01-2020
150 TXDTXD 36 (14925)Crepe Bandage Specification Second Revision of IS 4605 59.080;11.040.3006-01-2020
151 MTDMTD 3 (14927)TENSILE TESTING AT HIGH STRAIN RATES - PART 1 ELASTIC BAR TYPE SYSTEMS ICS 77.040.10 13-12-2019
152 MTDMTD 3 (14928)TENSILE TESTING AT HIGH STRAIN RATES - PART 2 SERVO HYDRAULIC AND OTHER TEST SYSTEMS ICS 77.040.10 13-12-2019
153 MTDMTD 3 (14931)METALLIC MATERIALS-SHEET AND STRIP-HOLE EXPANDING TEST ICS 77.040.10 13-12-2019
154 MTDMTD 3 (14933)METALLIC MATERIALS-TORSION TEST AT AMBIENT TEMPERATURE ICS 77.040.10 13-12-2019
155 MTDMTD 3 (14934)METALLIC MATERIALS-CHARPY V NOTCH PENDULUM IMPACT TEST-INSTRUMENTED TEST METHOD ICS 77.040.10 13-12-2019
156 MEDMED 25 (14935)Graphic Technology -- Blankets for Offset Printing ICS 37.100.1006-12-2019
157 ETDETD 40 (14936)Reliability and availability evaluation of HVDC systems ICS 29.240.0106-01-2020
158 MEDMED 6 (14939)Conveyor Chains Attachments and Sprockets ICS 53.040.2007-12-2019
159 PCDPCD 13 (14940)Standard Specification for Vulcanized Rubber Sheets for use as Geo-membrane Waterproofing Applications 83.140.1011-12-2019
160 MTDMTD 34 (14945)Methods of chemical analysis of iron ores Part 7 Determination of lead and or zinc content - Flame atomic absorption spectrometric method 73.060.10 07-12-2019
161 MTDMTD 34 (14946)Iron Ores Determination of Zinc Content Flame atomic absorption spectrometric method 73.060.10 07-12-2019
162 MTDMTD 34 (14947)Methods of chemical analysis of iron ores Part 6 Determination of sodium contents-Flame atomic abssorption spectrometric method 73.060.10 07-12-2019
163 MTDMTD 34 (14948) Iron Ores Determination of Potassium - Flame atomic absorption spectrometric method Based on ISO 13312 : 2017 73.060.10 07-12-2019
164 MTDMTD 34 (14949) Iron Ores Determination of Copper Part 2 : Flame atomic absorption spectrometric method Based on ISO 5418-2 : 2006 73.060.1007-12-2019
165 MTDMTD 34 (14950)Steel and Iron Determination of total carbon and sulfur content Infrared absorption method after combustion in an induction furnace Routine method Based on ISO 15350 : 2000 ICS 77.080.0107-12-2019
166 MTDMTD 34 (14953)Nickel Alloys Flame atomic absorption spectrometric analysis Part 1 : Determination of cobalt chromium copper iron and manganese Based on ISO 7530-1 : 2015 ICS 77.120.4007-12-2019
167 MTDMTD 10 (14954) General requirement for competence of assaying and hallmarking centres Amendment - 3 --07-12-2019
168 CEDCED 15 (14955)Door Handles for Mortice Locks Specification Second Revision of IS 4992 91.19007-12-2019
169 FADFAD 9 (14957)Code of practice for the prevention and reduction of mycotoxins in spices 67.220.1015-01-2020
170 ETDETD 44 (14958)Safety of machinery Electrical equipment of machines Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV ICS 13.110; 29.02007-12-2019
171 ETDETD 40 (14959)Guideline for the system design of HVDC converter stations with line-commutated converters ICS 29.240.01; 29.240.1006-01-2020
172 ETDETD 40 (14960)High-voltage direct current HVDC transmission Vocabulary first revision of IS 14801 : 2000 ICS 29.20006-01-2020
173 ETDETD 40 (14961)High voltage direct current HVDC power transmission System requirements for DC-side equipment Part 1: Using line-commutated converters ICS 29.200; 29.240.0106-01-2020
174 MEDMED 16 (14963)Colour Identification of Gas Cylinders and Related Equipment Intended for Medical Use 01.070 ; 23.020.3508-12-2019
175 PCDPCD 9 (14964)P-Xylene-Specification 71.080.1511-12-2019
176 PCDPCD 19 (14965)Cosmetics Sun protection test methods In vivo determination of sunscreen UVA protection 71.100.7010-01-2020
177 PCDPCD 19 (14967)Cosmetics Sun protection test methods In vitro determination of sunscreen UVA protection 71.100.7010-01-2020
178 PCDPCD 19 (14968)Cosmetics Sun protection test methods In vivo determination of sun protection factor SPF 71.100.7010-01-2020
179 PCDPCD 19 (14974) Henna ( MEHENDI ) Powder — Specification ( First Revision ) Amendment - 1 --14-01-2020
180 TXDTXD 23 (14975)Textiles Polypropylene PP High Density Polyethylene HDPE Laminated Woven Sacks for Mail Storage Transport and Distribution- Specifications 55.08013-01-2020
181 TXDTXD 8 (14977)Textile Polyvastra bedsheets khadi Specification 59.080.3014-12-2019
182 TXDTXD 8 (14978)Textile Polyvastra pillow cover khadi Specification 59.080.3014-12-2019
183 FADFAD 9 (14979)Spices and Condiments - Ginger Whole and Ground ICS 67.220.1015-01-2020
184 TXDTXD 25 (14980)COIR PITH AND COIR PITH ORGANIC MAUNRE - SPECIFICATIONS ICS 55.040; 59.060.10; 59.080.13-01-2020
185 TXDTXD 25 (14981)PVCLatex Tufted Coir Mats - Specification ICS 55.040; 59.060.10; 59.013-01-2020
186 MTDMTD 21 (14983)Steel - Ultrasonic testing of steel flat products of thickness equal to or greater than 6 mm ICS 77.040.20, 77.140.5015-12-2019
187 MTDMTD 21 (14984)Non-destructive testing - Radiation methods for computed tomography - Part 1: Terminology 19.10015-12-2019
188 MTDMTD 21 (14985)Non-destructive testing - Radiation methods for computed tomography - Part 2 Principles equipment and samples 19.10015-12-2019
189 PCDPCD 3 (14986)Diesel Engines NOX Reduction Agent AUS 32 Part 1 Quality Requirements ICS 43.060.40 15-12-2019
190 PCDPCD 3 (14987)Diesel Engines NOX Reduction Agent AUS 32 Part 2 Test Methods 43.060.40 15-12-2019