Indian Standard Details

    Print

IS Number : IS 9000 : Part 4 : 2020
IEC 60068-2-78 : 201
IS Title [Eng-Hn] : Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision )
No of Revision : 2
No of Amendments : 0
Technical Department : Electronics and Information Technology Department
Technical Committee : LITD 1 ( Environmental Testing Procedure )
Language : English

Group : Electronic and Telecom equipments, components and devices
Sub Group: Environment testing for electronic equipments
Sub Sub Group : Environmental Testing Procedure for Electronic and Electrical Items
Aspects: Methods of tests
Certification:
Ministry :
Short Commom Man's Title:
Itchs: 19040
Degree of Equivalence: Identical under dual numbering
Identical/Equivalent Standards:IEC 60068-2-78 : 201
Organisation :

Indian Standards Refered In IS IS 9000 : Part 4 : 2020 :
SNo IS Number Title Technical Committee
Standard contains no Cross Referenced Indian Standard.
Standard contains no Cross Referenced Indian Standard.
International Standards Refered In IS 9000 : Part 4 : 2020 Standard contains no Cross Referenced International Standard.
IS 9000 : Part 4 : 2020 is Refered in following Indian Standards :
SNo IS Number Title Technical Committee
1 IS/ISO 7240 : Part11 : 2011 Fire detection and alarm systems: Part 11 manual call points CED 22
2 IS/ISO 7240 : Part 15 : 2004 Fire detection and alarm systems: Part 15 point type fire detectors using scattered light, transmitted light or ionization sensors in combination with a heat sensor CED 22
3 IS 14686 : Part 4 : 2012 Radio frequency and coaxial cable assemblies: Part 4: Secal specification for semi - Rigid coaxial cable assemblies LTD 6
4 IS 14686 : Part 1 : 2006 Radio frequency and coaxial cable assemblies: Part 1 generic specification - General requirements and test methods (First Revision) LTD 6
5 IS 13900 : 1993 Generic specification for colour picture tube with electrostatic focussing and electromagnetic deflection for colour television rece4ers LTD 4
6 IS 12274 : 1987 Safety requirements for electronic flash apparatus for photographic purposes LTD 7
7 IS 13215 : 1991 Portable/personal transceivers - Specification LTD 7
8 IS 15245 : 2002 Digital set top box - Specificaiton LTD 7
9 IS 11182 : Part 5 : 1993 Guide for evaluation of insulation systems of electrical equipment: Part 5 mechanical endurance functional tests ETD 2
10 IS 4547 : 1992 Receivers for monochrome television broadcast transmissions - Specificaiton (Third Revision) LTD 7
11 IS/IEC 61757 : PART 1 : 1998 Fibre optic sensors: Part 1 generic specification LTD 11
12 IS 13247 : Part 1 : 1992 Complete filter units for radio interference suppression: Part 1 generic specification LTD 9
13 IS 11423 : 1985 Specification for portable prospecting radiation meters with geiger - Muller counter tube (Linear Scale Instruments) LTD 8
14 IS 3544 : 1966 General requirements and tests for tag strips (First Revision) LTD 3
15 IS 4795 : Part 1 : 2009 Holders for indicator lamps for electronic and telecommunication equipment - Specificaiton: Part 1 general requirements and tests (First Revision) LTD 3
16 IS 5054 : Part 1 : Sec 1 : 1995 Radio frequency connectors: Part 1 general requirements and measuring methods: Sec 1 general (Second Revision) LITD 6
17 IS 6102 : Part 1 : 2009 Finger knobs used in electronic and telecommunication equipment - Specificaiton: Part 1 general requirements and tests (First Revision) LTD 3
18 IS 13409 : 1992 High frequency transreceTVers specification LTD 12
19 IS/IEC 691 : 1993 Thermal Links - Requirements and Application Guide ETD 39
20 IS/IEC 127 : PART 6 : 1994 Miniature fuses: Part 6 fuse holders for miniature cartridge fuse links - Specification ETD 39
21 IS 14570 : 2012 Electrical measuring transducers for converting a.c. electrical quantities to analogue or digital signals (First Revision) ETD 12
22 IS 15382 : Part 1 : 2014 Insulation coordination for equipment within low - Voltage systems: Part 1 principles, requirements and tests (First Revision) ETD 19
23 IS 15382 : Part 3 : 2019 Insulation coordination for equipment within low-voltage systems : Part 3 use of coating potting or moulding for protection against pollution ETD 19
24 IS 13648 : 1993 Power electronics capacitors ETD 29
25 IS 15406 : Part 1 : 2003 Capacitors for microwave ovens: Part 1 general ETD 29
26 IS 2993 : 1998 A.C. motor capacitors (Second Revision) ETD 29
27 IS 302 : Part 2 : Sec 25 : 2014 Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens ETD 32
28 IS 10242 : Part 5 : Sec 4 : 1998 Electrical installations in ships:Part 5 special features: Sec 4 control and instruments - Specification ETD 20
29 IS 14479 : 1998 Electrotechnical compatibility of electrical and electronic installations in ships - Specification ETD 20
30 IS 13122 : Part 1 : 1993 Transmitters for use in industrial process control systems - Specification: Part 1 methods for evaluating the performance ETD 18
31 IS 616 : 2017 Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision) LTD 7
32 IS 14700 : Part 4 : Sec 15 : 2018 Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 15 flickermeter - Functional and design specifications (Second Revision) LTD 9
33 IS 5786 : Part 1 : 2018 Fixed resistors for use in electronic equipment: Part 1 generic specification (Second Revision) LTD 5
34 IS 16855 : Part 1 : 2018 Current and voltage sensors or detectors, to be used for fault passage indication purposes: Part 1 general principles and requirements ETD 34
35 IS 16911 : 2018 Junction Boxes for Photovoltaic Modules - Safety Requirements and Tests ETD 28
36 IS 14481 : Part 1 : 2018 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post - Accident conditions: Part 1 general requirements LTD 8
37 IS 14286 : Part 2 : 2019 Terrestrial photovoltaic (PV) modules - Design qualification and type approval: Part 2 test procedures (Second Revision) ETD 28
38 IS 17017 : Part 1 : 2018 Electric Vehicle Conductive Charging System Part 1 General Requirements ETD 51
39 IS 17017 : Part 1 : 2018 Electric Vehicle Conductive Charging System Part 1 General Requirements ETD 51
40 IS 8872 : Part 1 : 2018 Potentiometers for use in electronic equipment: Part 1 generic specification (First Revision) LTD 5
41 IS/IEC 60793 : Part 1 : Sec 50 : 2014 Optical Fibres Part 1 Measurement Methods and Test Procedures Section 50 Damp heat (steady state) tests LTD 11
42 IS 17008 : 2019 Weigh-in-Motion System for Road Vehicles — Specification LTD 8
43 IS/IEC 61800 : Part 2 : 2015 Adjustable Speed Electrical Power Drive Systems Part 2 General Requirements — Rating Specifications for Low Voltage Adjustable Speed a.c. Power Drive Systems ETD 31
44 IS/IEC 62246 : Part 1 : Sec 1 : 2018 Reed Switches Part 1 Generic Specification Section 1 Blank detail specification ( First Revision ) ETD 35
45 IS/IEC 62421 : 2007 Electronics Assembly Technology-Electronic Modules LTD 5
46 IS 15474 : Part 3 : Sec 5 : 2018 Dependability Management Part 3 Application Guide Section 5 Reliability Test Conditions and Statistical Test Principles LTD 2
47 IS 17040 : 2018 Circuit Breakers — Switched Protective Earth Portable Residual Current Devices for Class I and Battery Powered Vehicle Applications ETD 7
48 IS/IEC 62368 : Part 1 : 2018 Audio / Video, Information and Communication Technology Equipment Part 1 Safety Requirements ( First Revision ) LTD 7
49 IS/ISO 7240 : Part 7 : 2011 Fire detection and alarm systems: Part 7 point - Type smoke detectors using scattered light, transmitted light or ionization CED 22
50 IS 9000 : Part 4 : 2020 Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision ) LTD 1
51 IS/ISO 7240 : Part 8 : 2014 Fire Detection and Alarm Systems Part 8 Point-Type Fire Detectors Using a Carbon Monoxide Sensor in Combination with a Heat Sensor CED 22
52 IS/ISO 7240 : Part 10 : 2012 Fire Detection and Alarm Systems Part 10 Point-Type Flame Detectors CED 22
53 IS/ISO 7240 : Part 18 : 2017 Fire Detection and Alarm Systems Part 18 Input/Output Devices CED 22
54 IS/ISO 7240 : Part 21 : 2005 Fire Detection and Alarm Systems Part 21 Routing Equipment CED 22
55 IS/ISO 7240 : Part 24 : 2016 Fire Detection and Alarm Systems Part 24 Fire Alarm Loudspeakers CED 22
56 IS/ISO 7240 : Part 25 : 2010 Fire Detection and Alarm Systems Part 25 Components Using Radio Transmission Paths CED 22
57 IS/ISO 7240 : Part 27 : 2018 Fire Detection and Alarm Systems Part 27 Point Type Fire Detectors Using a Smoke Sensor in Combination with a Carbon Monoxide Sensor and, Optionally, One or More Heat Sensors CED 22
58 IS/ISO 7240 : Part 29 : 2017 Fire Detection and Alarm Systems Part 29 Video Fire Detectors CED 22
59 IS/IEC 62341 : Part 5 : 2009 Organic Light Emitting Diode OLED displays- Part 5: Environmental testing methods LITD 4
60 IS 9229 : 1979 Specification for inductors for electromagnetic interference suppression LTD 24
61 IS 10230 : Part 1 : 1982 Specification for if and RF transformers inductors (Coils) and: Part 1 general requirements and tests LTD 24
62 IS 11334 : 1984 Method of measurement for piezoelectric ceramic resonators and resonator units for frequency control and selection LTD 24