1
IS 15742 : 2007
Textiles - Requirements for clothing made of limited flame spread materials and material assemblies affording protection against heat and flame - Specification
TXD 32
Product Specification
2
IS 1989 : Part 1 : 1986
Specification for leather safety boots and shoes: Part 1 for miners (Fourth Revision)
CHD 19
4
Product Specification
3
IS 1989 : Part 2 : 1986
Specification for leather safety boots and shoes: Part 2 for heavy metal industries (Fourth Revision)
CHD 19
4
Product Specification
4
IS 5557 : 2004
Industrial and protective rubber knee and ankle boots - Specification (Fourth Revision)
CHD 19
4
Product Specification
5
SP 7 : 2016
National building code of India: Part 0 integrated approach - Prerequisite for applying provisions of the code
CED 46
3
Others
6
IS 14217 : 1994
Miners cap lamp batteries (Alkaline Type) - Specification
ETD 11
Product Specification
7
IS/IEC 60079 : Part 35 : Sec 2 : 2011
Explosive Atmospheres Part 35 Caplights for use in Mines Susceptible to Firedamp Section 2 Performance and other safety related matters
ETD 22
Product Specification
8
IS/IEC 60079 : PART 28 : 2015
Explosive atmospheres: Part 28 protection of equipment and transmission systems using optical radiation (First Revision)
ETD 22
1
Product Specification
9
IS/IEC 60079 : PART 20 : SEC 1 : 2010
Explosive atmospheres: Part 20 material characteristics for gas and vapour classification: Sec 1 test methods and data
ETD 22
Methods of tests
10
IS 4051 : 1967
Code of practice for installation and maintenance of electrical equipment in mines
ETD 22
Code of Practice
11
IS 5572 : 2009
Classification of hazardous areas (Other Than Mines) having flammable gases and vapours for electrical installation (Third Revision)
ETD 22
3
Code of Practice
12
IS 5679 : 1986
Miners' cap lamp assemblies (incorporating lead acid type batteries)
ETD 22
1
Product Specification
13
IS 9559 : 1980
Guide for selection of electrical and electronic equipment for coal mines
ETD 22
Code of Practice
14
IS 9836 : 1981
Specification for exploders
ETD 22
Product Specification
15
IS/IEC 60079 : Part 1 : 2014
Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures "d"
ETD 22
1
Product Specification
16
IS/IEC 60079 : PART 0 : 2017
Explosive Atmospheres Part 0 Equipment — General Requirements ( Third Revision )
ETD 22
3
Product Specification
17
IS/IEC 60079 : PART 11 : 2011
Explosive Atmospheres Part 11 Equipment Protection by Intrinsic Safety “i” (First Revision)
ETD 22
1
Product Specification
18
IS/IEC 60079 : PART 16 : 1990
Electrical apparatus for explosive gas atmospheres: Part 16 artificial ventilation for the protection of analvzer(S) houses
ETD 22
Others
19
IS/IEC 60079 : PART 17 : 2013
Explosive atmospheres: Part 17 electrical installations inspection and maintenance (First Revision)
ETD 22
1
Code of Practice
20
IS/IEC 60079 : PART 18 : 2014
Explosive atmospheres: Part 18 equipment protection by encapsulation "M" (Second Revision)
ETD 22
2
Product Specification
21
IS/IEC 60079 : PART 2 : 2014
Explosive atmospheres: Part 2 equipment protection by pressurized enclosure "P" (First Revision)
ETD 22
Product Specification
22
IS/IEC 60079 : PART 5 : 2015
Explosive atmospheres: Part 5 equipment protection by powder filling "Q" (First Revision)
ETD 22
1
Product Specification
23
IS/IEC 60079 : PART 29 : SEC 2 : 2015
Explosive atmospheres: Part 29 gas detectors: Sec 2 selection, installation, use and maintenance of detectors for flammable gases and oxygen (First Revision)
ETD 22
1
Code of Practice
24
IS/IEC 60079 : Part 29 : Sec 1 : 2016
Explosive atmospheres Part 29 Gas detectors Section 1 Performance Requirements of Detectors for Flammable Gases
ETD 22
1
Code of Practice
25
IS 2365 : 2018
Steel wire suspension ropes for lifts, elevators and hoists - Specification (Second Revision)
MED 10
2
Product Specification
26
IS 3623 : 1978
Specification for guide and rubbing ropes (First Revision)
MED 10
1
Product Specification
27
IS 3626 : 2001
Locked coil winding ropes - Specification (Second Revision)
MED 10
2
Product Specification
28
IS 16014 : 2018
Mechanically woven, double - Twisted, hexagonal wire mesh gabions, revet mattresses, rock fall netting and other products for civil engineering purposes (Galvanized Steel Wire Or Galvanized Steel Wire With Polymer Coating) - Specification (First Revision)
MED 10
1
Product Specification
29
IS 14531 : 2005
Manipulating industrial robots -- Presentation of characteristics (first revision)
PGD 18
Others
30
IS 14533 : 2005
Manipulating industrial robots -- Performance criteria and related test methods (first revision)
PGD 18
Methods of tests
31
IS 14776 : Part 1 : 2000
Industrial automation -- Shop floor production: Part 1 Reference model for standardization and a methodology for identification of requirements
PGD 18
Code of Practice
32
IS 15571 : 2005
Industrial automation glossary
PGD 18
Terminology
33
IS/ISO 4412 : PART 2 : 1991
Hydraulic fluid power - Test code for determination of airborne noise levels: Part 2 motors
PGD 36
Code of Practice
34
IS/ISO 4412 : Part 3 : 1991
Hydraulic fluid power - Test code for determination of airborne noise levels: Part 3 pumps - Method using a parallelepiped microphone array
PGD 36
Code of Practice
35
IS 8091 : 2018
Industrial plant layout - Code of safe practice (Second Revision)
CHD 8
2
Code of Practice
36
IS 8095 : 1976
Specification for accident prevention tags
CHD 8
Product Specification
37
IS 8218 : Part 1 : 1976
Safety code for plant railways: Part 1 layout
CHD 8
Code of Practice
38
IS 8218 : Part 2 : 1982
Safety code for plant railways: Part 2 locomotives, wagons and their movement
CHD 8
Code of Practice
39
IS 8347 : 2008
Respiratory protective devices - Definitions, classification and nomenclature of components (First Revision)
CHD 8
1
Terminology
40
IS 8520 : 2023
Eye and face protection — Guidance on selection, use, and maintenance (First Revision)
CHD 8
1
Code of Practice
41
IS 8807 : 1978
Guide for selection of industrial safety equipment for protection of arms and hands
CHD 8
Code of Practice
42
IS 8940 : 1978
Code oF practice for maintenance and care of industrial safety equipment for eye and face protection
CHD 8
Code of Practice
43
IS 8990 : 1978
Code of practice for maintenance and care of industrial safety clothing
TXD 32
Code of Practice
44
IS 9473 : 2002
Respiratory protective devices - Filtering half masks to protect against particles - Specification (First Revision)
CHD 8
1
Product Specification
45
IS 9623 : 2008
Selection, use and maintenance of respiratory protective devices - Code of practice (First Revision)
CHD 8
1
Code of Practice
46
IS 9937 : 1981
Specification for portable methanometer (Electrical Type)
CHD 8
Product Specification
47
IS 10245 : Part 1 : 1996
Breathing apparatus: Part 1 closed circuit breathing apparatus (Compressed Oxygen Cylinder) - Specification (First Revision)
CHD 8
1
Product Specification
48
IS 10245 : Part 3 : 1999
Breathing apparatus: Part 3 fresh air hose and compressed air line breathing apparatus - Specification (First Revision)
CHD 8
1
Product Specification
49
IS 10245 : Part 4 : 1982
Specification for breathing apparatus: Part 4 escape breathing apparatus (Short Duration Self - Contained Type)
CHD 8
Product Specification
50
IS 10592 : 2018
Industrial emergency showers, eye and face fountains and combination units - Specification (First Revision)
CHD 8
1
Product Specification
51
IS 13366 : 1992
Resuscitators intended for use with humans - Specification
CHD 8
Product Specification
52
IS 14166 : 1994
Respiratory protective devices full - Face masks - Specification
CHD 8
Product Specification
53
IS 14744 : 1999
Flame retardent protective hoods - Specification
TXD 32
Product Specification
54
IS 14746 : 1999
Respiratory protective devices - Half masks and quarter masks - Specification
CHD 8
Product Specification
55
IS 15071 : 2002
Chemical protective clothing - Specification
TXD 32
Product Specification
56
IS 15321 : 2003
Molten metal splash protective hoods - Specification
TXD 32
Product Specification
57
IS 15322 : 2003
Particle filters used in respiratory protective equipment - Specification
CHD 8
Product Specification
58
IS 15323 : 2003
Gas filters and combined filters used in respiratory protective equipment - Specification
CHD 8
Product Specification
59
IS 15803 : 2008
Respiratory protective devices - Self contained closed circuit breathing apparatus chemical oxygen (KO2) type, self generating, self rescuers - Specification
CHD 8
Product Specification
60
IS 18001 : 2007
Occupational Health and Safety Management Systems - Requirements with Guidance for Use
CHD 8
1
System Standard
61
IS 15793 : 2007
Managing environment, occupational health and safety legal compliance - requirements of good practices
CHD 8
Code of Practice
62
IS 14489 : 2018
Occupational health and safety audit - Code of practice (First Revision)
CHD 8
1
Code of Practice
63
IS 10224 : 1982
Ergonomic principles in the design of work systems
CHD 8
Code of Practice
64
IS 10667 : 1983
Guide for selection of industrtal safety equipment for protection of foot and leg
CHD 8
Code of Practice
65
IS 15298 : Part 5 : 2004
Safety, protective and occupational footwear for professional use: Part 5 additional requirements and test methods
CHD 19
Product Specification
66
IS 15298 : Part 6 : 2004
Safety, protective and occupational footwear for professional use: Part 6 additional specifications for safety footwear
CHD 19
Product Specification
67
IS 15298 : Part 7 : 2004
Safety, protective and occupational footwear for professional use: Part 7 additional specifications for protective footwear
CHD 19
Product Specification
68
IS 15298 : Part 8 : 2004
Safety, protective and occupational footwear for professional use: Part 8 additional specification for occupational footwear
CHD 19
Product Specification
69
IS/IEC 60079 : Part 29 : Sec 4 : 2009
Explosive atmospheres: Part 29 gas detectors: Sec 4 performance requirements of open path detectors for flammable gases
ETD 22
Product Specification
70
IS/IEC 60079 : Part 10 : Sec 2 : 2015
Explosive atmospheres: Part 10 classification of areas: Sec 2 explosive dust atmospheres (First Revision)
ETD 22
Code of Practice
71
IS 16655 : 2017
Textiles - Protective clothing for use in welding and allied processes
TXD 32
Product Specification
72
IS/ISO/IEC 80079 : Part 20 : Sec 2 : 2016
Explosive atmospheres: Part 20 material characteristics: Sec 2 combustible dusts test methods
ETD 22
Methods of tests
73
IS 16601 : 2016
Habitat and welfare requirements for construction workers - Guidelines
CED 29
Others
74
IS 15298 : part 4 : 2017
Personal protective equipment: Part 4 occupational footwear (Second Revision)
CHD 19
2
Product Specification
75
IS 15298 : Part 2 : 2016
Personal protective equipment: Part 2 safety footwear (Second Revision)
CHD 19
2
Product Specification
76
IS 15809 : 2017
High visibility warning clothes – Specification (first revision)
TXD 32
1
Product Specification
77
IS 16724 : 2018
Explosive atmospheres - Electrical installations design, selection and erection
ETD 22
Code of Practice
78
IS/ISO/IEC 80079 : Part 34 : 2018
Explosive Atmospheres Part 34 Application of Quality Management Systems for Ex Product Manufacture
ETD 22
Others
79
IS/ISO 45001 : 2018
Occupational Health and Safety Management Systems — Requirements with Guidance for Use ( Second Revision )
CHD 8
System Standard
80
IS 17274 : Part 5 : 2019
Respiratory Protective Devices — Methods of test and test equipment Part 5 Breathing machine, metabolic simulator, RPD head forms and torso, tools and verification tools
CHD 8
Methods of tests
81
IS 5852 : Part 2 : 2019
Toe Caps for Protection of Feet — Specification Part 2 Non-Metallic Toe Caps
CHD 19
Product Specification
82
IS 17274 : Part 8 : 2019
Respiratory Protective Devices — Methods of Test and Test Equipment Part 8 Measurement of RPD Air Flow Rates of Assisted Filtering RPD
CHD 8
Methods of tests
83
IS 17274 : Part 9 : 2019
Respiratory Protective Devices — Methods of Test and Test Equipment Part 9 Determination of Carbon Dioxide Content of the Inhaled Gas
CHD 8
Methods of tests
84
IS 17274 : Part 10 : 2019
Respiratory Protective Devices — Methods of Test and Test Equipment Part 10 Resistance to Ignition, Flame, Radiant Heat and Heat
CHD 8
Methods of tests
85
IS 17274 : Part 11 : 2019
Respiratory Protective Devices — Methods of Test and Test Equipment Part 11 Determination of Field of Vision
CHD 8
Methods of tests
86
IS 17274 : Part 12 : 2019
Respiratory Protective Devices — Methods of Test and test Equipment Part 12 Determination of Volume-Averaged Work of Breathing and Peak Respiratory Pressures
CHD 8
Methods of tests
87
IS 17274 : Part 13 : 2019
Respiratory Protective Devices — Methods of Test and Test Equipment Part 13 RPD Using Regenerated Breathable Gas and Special Application Mining Escape RPD: Consolidated Test for Gas Concentration, Temperature, Humidity, Work of Breathing, Breathing Resistance, Elastance and Duration
CHD 8
Methods of tests
88
IS/IEC 60079 : Part 35 : Sec 1 : 2011
Explosive Atmospheres Part 35 Caplights for Use in Mines Susceptible to Firedamp Section 1 General requirements — Construction and testing in Relation to the risk of explosion
ETD 22
Product Specification
89
IS/ISO/IEC 80079 : Part 37 : 2016
Explosive Atmospheres Part 37 Non-electrical Equipment for Explosive Atmospheres - Non Electrical Type of Protection Constructional Safety, Control of Ignition Source, Liquid Immersion
ETD 22
Product Specification
90
IS/ISO/IEC 80079 : Part 36 : 2016
Explosive Atmospheres Part 36 Non-electrical Equipment for Explosive Atmospheres - Basic Method and Requirements
ETD 22
Product Specification
91
IS/ISO/IEC 80079 : Part 38 : 2016
Explosive Atmospheres Part 38 Equipment and Components in Explosive Atmospheres in Underground Mines
ETD 22
Product Specification
92
IS/IEC/IEEE 60079 : Part 30 : Sec 1 : 2015
Explosive Atmospheres Part 30 Electrical Resistance Trace Heating Section 1 General and testing requirements ( First Revision )
ETD 22
Product Specification