Standards in Category :: Automobiles and Transport of goods

 

SI. No.
IS Number
Product
Features
Action
1.
 IS 6566 : 2020
ISO 668 : 2013
 Freight Containers These containers are intended for intercontinental traffic. This standard establishes a classification of series 1 freight containers based on external dimensions, and specifies the associated ratings and, where appropriate, the minimum internal and door opening dimensions for certain types of containers. View IS Detail
2.
 IS 7917 : 1994
ISO 8323:1985
Reviewed In : 2019		 Freight containers Design requirements for containers which are primarily intended for transportation through air and interchange with surface transport modes (road, rail and sea). View IS Detail
3.
 IS 9881 : 2007
Reviewed In : 2018		 Container spreaders When a typical 4-leg sling is used for lifting a freight container, compressive stresses are developed along the horizontal roof line of the container. Containers are not constructed to take this stress at the roof plane. Therefore, spreaders are used for handling of freight containers which take these compressive stresses and prevent the container from any damage. Hence this standard was prepared to specify types, dimensions, material and testing of spreaders for handling freight containers of 6 m (20 feet) and 12 m (40 feet). View IS Detail
4.
 IS 10880 : 2006
Reviewed In : 2022		 Twist Locks for lifting freight containers Lifting twist locks are used in sets of four in spreaders (lifting frame) for lifting freight containers. The twist locks provide a means for locating containers to the spreaders suitable for automatic, semi-automatic or manual operating systems. These twist locks are associated with spigots which place the twist locks in the fittings of the container. The profiles of these twist locks are such as to provide a degree of flexibility. View IS Detail
5.
 IS 13112 : 1991
Reviewed In : 2022		 Cargo securing systems for general purpose freight containers The purpose of the cargo securing system is to restrain the movement of the cargo inside the container resulting from dynamic forces induced during transportation. Cargo securing systems may consist of shoring, cargo securing devices, and combination of both. View IS Detail
6.
 IS 13288 (Part 1) : 1993
ISO 1496-1 : 2013
Reviewed In : 2019		 Freight Containers — Specification And Testing This standard specifies the basic specifications and testing requirements for series 1 freight containers of the totally enclosed general purpose types and certain specific purpose types (closed, vented, ventilated or open top) which are suitable for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport. View IS Detail
7.
 IS 13942 (Part 1) : 2019
 External Projection This standard specifies the requirements for External Projection and its Performance Requirements for M1 Category of Vehicles View IS Detail
8.
 IS 14210 : 1994
Reviewed In : 2019		 Rear View Mirrors Rear view mirrors aid the drivers in viewing the vehicles coming from the back of the vehicles. This Indian Standard specifies the requirements for internal and external rear view mirrors used in vehicles like cars, trucks, buses, scooters and motorcycles View IS Detail
9.
 IS 4300 : 1989
Reviewed In : 2024		 Box Pallets Prescribes the requirements for Box pallets for through transit of goods and its specifications View IS Detail
10.
 IS 7694 : 2021
ISO 1161 : 2016
 Corner fittings Prescribesthe requirements for freight containers Corner and intermediate fittings. View IS Detail
11.
 IS/ISO 12776 : 2008
ISO 12776 : 2008
 Pallets Slip Sheets Prescribesthe requirements for Pallets slip Sheets. The system of slip-sheet unit-load handling involves the use of a thin sheet of material, the slip-sheet, as a base on which items are assembled as a unit load for handling, transport and storage. Slip-sheets provide an Alternative to the use of pallets for assembling, handling, transporting and sorting goods in unit-load form. View IS Detail
12.
 IS 13608 : 1993
Reviewed In : 2019		 Sheet pallets This standard specifies the Requirements for Sheet Pallets and its specifications. View IS Detail
13.
 IS 13664 : 1993
Reviewed In : 2019		 Poly - Pallets Poly Pallets used for Bag storage godowns View IS Detail
14.
 IS 13714 : 1993
Reviewed In : 2019		 Dunnage pallets Dunnage Pallets used for Warehousing Applications. View IS Detail
15.
 IS 16058 : 2013
Reviewed In : 2019		 Dunnage pallets Dunnage pallets made from recycled plastic wastes for warehousing applications View IS Detail
16.
 IS 17427 : 2020
 Wooden Timber Pallets Wooden Timber Pallets for Packaging Storage and Transportation View IS Detail
17.
 IS 13288 (Part 3) : 2002
ISO 1496-3:1995
Reviewed In : 2023		 Freight Containers Prescribes the requirements for tank containers for liquids gases and pressurized dry bulk and their specifications. View IS Detail
18.
 IS 18149 : 2023
 Transportation of Dangerous Goods — Guidelines This standard provides guidelines on packaging, labeling, handling and transport operations for safe transportation of dangerous goods based on their classification which include explosives, gases, flammable liquids, flammable solids, oxidizing substances and organic peroxides, poisonous and infectious substances, radioactive substances, corrosive substances and other miscellaneous dangerous substances, in order to prevent harm to human, animals, property and the environment. View IS Detail

Note 1 : For details of any specific Indian Standard, please access our Know your Standards feature on BIS website (www.bis.gov.in ) or BIS Care App

Note 2 : For complete list of Indian Standard, please go to our Published Standard feature of Standardization portal (www.manakonline.in).