Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 4432 : 1988
Reviewed In : 2024

IS Title/आईएस शीर्षक : Specification for case hardening steels (First Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Not Equivalent

Number of Revisions/पुनरीक्षणों की संख्या : 1

Number of Amendments/संशोधनों की संख्या : 1

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : April, 2024

Technical Department/तकनीकी विभाग : MTD (Metallurgical Engineering Department)

Technical Committee/तकनीकी समिति : MTD 16 (Alloy Steels and Forging Sectional Committee Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. RAM SAI KUMAR GEDELA (SCIENTIST-C)

Other Details

Indian Standard

Click to download

Amendment : 1

Click to download

Gazette Document : 0

License : 5

Click to view

Product Manual & SIT : 1

Click to download

Laboratory : 4

Click to view

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 4432 : 1988
Reviewed In : 2024 :

1	IS 228 : 1959 Reviewed In : 1997	Methods of chemical analysis of pig iron, cast iron and plain carbon and low alloy steel	MTD 7
2	IS 228 (Part 1) : 1987 Reviewed In : 2023	Methods for chemical analysis ofsteels: Part 1 determination ofcarbon by volumetric method (For Carbon 0.05to 2.50 Percent) (Third Revision)	MTD 34
3	IS 228 (Part 2) : 2024	Methods for chemical analysis of steels part 2 determination of manganese in plain - Carbon and low alloy steels by arsenite method (Third Revision)	MTD 34
4	IS 228 (Part 3) : 2024	Methods for chemical analysis 6f steels: Part 3 determination of phosphorus by alkalimetric method (Third Revision	MTD 34
5	IS 228 (Part 4) : 1987 Reviewed In : 2023	Method for chemical analysis of steels: Part 4 determination of total carbon by gravimetric method (For Carbon R 0.1 Percent) (Third Revision)	MTD 34
6	IS 228 (Part 5) : 1987 Reviewed In : 2023	Methods for chemical analysis of steels: Part 5 determination of nickel by dimethylglyoxime (Gravimetric) method (For Nickel)O - l percent) (Third Revision)	MTD 34
7	IS 228 (Part 6) : 1987 Reviewed In : 2023	Methods for chemical analysis of steels: Part 6 determination of - Chromium by persulphate oxidation method (For Chromium)04 percent) (Third Revision)	MTD 34
8	IS 228 (Part 7) : 1990 Reviewed In : 2023	Methods for chemical analysis of steels: Part 7 determination of molybdenum by alpha - Benzoinoxime method in alloy steels (For molybdenum 1 percent and not containing tungsten) (Third Revision)	MTD 34
9	IS 228 (Part 8) : 1989 Reviewed In : 2023	Methods for chemicalanalysisofsteels: Part 8 determination of silicon by the gravimetric method (For Silicon 0.05 To 5.00 Percent) (Third Revision)	MTD 34
10	IS 228 (Part 9) : 1989 Reviewed In : 2023	Methods for chemical analysis of steels : Part 9 determination of sulphur by evolution method (For Sulphur 0.01 To 0.25 Percent) (Third Revision)	MTD 34
11	IS 228 (Part 10) : 1989 Reviewed In : 2023	Methods for chemical analysis of steels: Part 10 determination of molybdenum by thiocyanate (Photometric) method in low and high alloy steels (For Molybdenum 0.01 To 1.50 Percent) (First Revision)	MTD 34
12	IS 228 (Part 11) : 1990 Reviewed In : 2024	Methods for chemical analysis of steels : Part 11 determination of total silicon by reduced molybdosilicate spectrophotometric method in carbon steels and low alloy steels (For Silicon 0.01 To 0.05 Percent) (Third Revision)	MTD 34
13	IS 228 (Part 12) : 2001 Reviewed In : 2023	Methods for chemical of steels analysis: Part 12 determination of manganese by periodate spectrophotometric method in plain carbon, low alloy and high alloy steels (For Manganese 0.01 To 5.0 Percent) (Fourth Revision)	MTD 34
14	IS 228 (Part 13) : 1982 Reviewed In : 2024	Methods for chemical analysis of steels: Part 13 determination of arsenic	MTD 34
15	IS 228 (Part 14) : 1988 Reviewed In : 2023	Methods for chemical analysis of steels: Part 14 determination of carbon by thermal conductivity method (For Carbon 0.005 To 2.000 Percent	MTD 34
16	IS 228 (Part 15) : 1992 Reviewed In : 2023	Methods for chemical analysis of steels: Part 15 determination of copper by thiosulphate iodide method (For Copper 0.05 To 5 Percent) (Second Revision)	MTD 34
17	IS 228 (Part 16) : 1992 Reviewed In : 2023	Methods for chemical analysis of steels: Part 16 determination of tungsten by spectrophotometric method (For Tungsten 0.1 To 2 Percent) (Second Revision)	MTD 34
18	IS 228 (Part 17) : 1998 Reviewed In : 2021	Methods for chemical analysis of steels: Part 17 determination of nitrogen by thermal conductivity method (For Nitrogen Up To 0.04 Percent) (Second Revision)	MTD 34
19	IS 228 (Part 18) : 1998 Reviewed In : 2023	Methodsofchemicalanalysis ofsteels: Part 18 determination of oxygen by instrumental method (For Oxygen 0.001 To 0.1000 Percent) (Second Revision)	MTD 34
20	IS 228 (Part 19) : 1998 Reviewed In : 2021	Methods of chemical analysis of steels: Part 19 determination of nitrogen by steam distillation method (For Nitrogen 0.002 To 0.50 Percent) (Second Revision)	MTD 34
21	IS 228 (Part 20) : 2021	Methods for chemical analysis of steels: Part 20 determination of carbon and sulphur by infra red absorption method (For Carbon 0.005 To 2 Percent And Sulphur 0.001 To 0.35 Percent) (Second Revision)	MTD 34
22	IS 228 (Part 21) : 2003 Reviewed In : 2023	Methods for chemical analysis of steels: Part 21 determination of copper by spectrophotometric method (For Copper 0.02 To 0.50 Percent) (Second Revision)	MTD 34
23	IS 228 (Part 22) : 2003 Reviewed In : 2023	Methods of chemical analysis of steels: Part 22 determination of total hydrogen in steel by thermal conductivity method (Hydrogen 0.1 Ppm To 50 Ppm)	MTD 34
24	IS 228 (Part 23) : 2003 Reviewed In : 2023	Methods of chemical analysis of steels: Part 23 determination of total nitrogen in steel by optical emission spectrometer (Nitrogen 0.002 To 1.0 Percent)	MTD 34
25	IS 228 (Part 24) : 2003 Reviewed In : 2023	Methods of chemical analysis of steels: Part 24 determination of nitrogen in steel by inert gas fusion - Thermal conductivity method (Nitrogen 0.001 To 0.2 Percent)	MTD 34
26	IS 1500 : 2005 IS 1500(Part 1):2013 / ISO 6506-1:2005 Reviewed In : 2010	Method for Brinell Hardness Test for Metallic Materials	MTD 3
27	IS 1500 (Part 2) : 2021 ISO 6506-2 : 2014	Matallic Materials - Brinell Hardness Test Part 2 Verification and Calibration Testing Machines	MTD 3
28	IS 1500 (Part 1) : 2019 ISO 6506-3 : 2014 Reviewed In : 2024	Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)	MTD 3
29	IS 1500 (Part 3) : 2019 ISO 6506-3 : 2014 Reviewed In : 2024	Metallic materials - Brinell hardness test: Part 3 calibration of reference blocks (Fifth Revision)	MTD 3
30	IS 1500 (Part 4) : 2019 6506-4 : 2014 Reviewed In : 2024	Metallic materials - Brinell hardness test: Part 4 table of hardness values (Fifth Revision)	MTD 3
31	IS 1608 : 2005 IS 1608:2005 / ISO 6892:1998 Reviewed In : 2017	Mechanical testing of metals - Tensile Testing	MTD 3
32	IS 1598 : 1977 Reviewed In : 2020	Method for izod impact test of metals (First Revision)	MTD 3
33	IS 4163 : 2021 ISO 4967:2013	Steel - Determination of content of nonmetallic inclusions - Micrographic method using standard diagrams (Third Revision)	MTD 22
34	IS 10138 : 2010 Reviewed In : 2022	Macroscopic methods for determination of non-metallic inclusion content in wrought steels (Second Revision)	MTD 22
35	IS 3739 : 1987 Reviewed In : 2023	Dimensional tolerances for carbon and alloy constructional steel ( First revision )	MTD 16
36	IS 3469 (Part 13) : 1974 Reviewed In : 2023	Tolerances for closed die steel forgings (First Revision)	MTD 16
37	IS 11371 : 2022	Method for macroetch test of wrought steel products	MTD 22
38	IS 3664 : 1981 Reviewed In : 2020	Code of practice for ultrasonic pulse echo testing by contact and immersion methods (first revision)	MTD 21
39	IS 3848 : 2024 ISO 642:1999	Method for end quench test for hardenability of steel (First Revision)	MTD 22
40	IS 2049 : 1978 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Colour code for the identification of wrought steels for general engineering purposes (First Revision)	MTD 4

International Standards Referred In IS 4432 : 1988
Reviewed In : 2024

Standard contains no Cross Referenced International Standard.

IS 4432 : 1988
Reviewed In : 2024 is Referred in following Indian Standards :

1	IS 10490 : 1983	Specification for breech loading shot guns, single and double barrel	PGD 28
2	IS 10491 : 1983	Specification for muzzle loading shot guns, single and double barrel	PGD 28
3	IS 13136 : 1991	Arms and ammunition - Rifle - Air rifle spring operated - Specification	PGD 28
4	IS 14391 : 1997	Gas operated rifle (For shooting Pellets) - Specification	PGD 28
5	IS 14422 : 1997	Arms and ammunition - Rifle 5.5 mm (0.22), bolt operated - Specification	PGD 28
6	IS 4291 : 1996	C - Washers - Specification (First Revision)	PGD 35
7	IS 4295 : 1983	Specification for locking dogs (Catches) with springs (First Revision)	PGD 35
8	IS 5093 : 1996	Locating pins (Round) - Specification (First Revision)	PGD 35
9	IS 13124 : 1993	Reciprocating gas compressors - Technical supply conditions	MED 22
10	IS 5500 : Part 2 : 2004	Vibratory roller - General requirements: Part 2 self - Propelled single drum (Third Revision)	MED 7
11	IS 5500 : Part 1 : 2004	Vibratory roller - General requirements: Part 1 self - Propelled tandem drum (Second Revision)	MED 7
12	IS 14207 : 1994	Household sewing machines - Open type shuttle race sub - Assembly - Specification	MED 29
13	IS 13806 : 1993	Household sewing machine - Closed type shuttle race assembly - Specification	MED 29
14	IS 4341 : 1997	Household sewing machines - Feed bar rollers and studs - Specification (First Revision)	MED 29
15	IS 4339 : 1997	Household sewing machines - Needle bar link studs - Specification (First Revision)	MED 29
16	IS 4188 : 1996	Household sewing machines - Oscillating shaft - Specification (First Revision)	MED 29
17	IS 11379 : 1985	Specification for wrenches for retaining screw for milling arbor	PGD 34
18	IS 12166 : 1987	Specification for ratchet screwdrivers	PGD 34
19	IS 14339 : 1996	Horology -- Watch bezel and back cover gauges -- Technical supply conditions -- General	PGD 23
20	IS 7587 : Part 4 : 2006	Cage suspension gear for winding in mines - Specification: Part 4 bridle chains (First Revision)	MED 8
21	IS 7587 : Part 2 : 2006	Cage suspension gear for winding in mines - Specification: Part 2 cappels (First Revision)	MED 8
22	IS 11594 : 1985	Specification for mild steel thin walled samplnig tubes and sampler heads	CED 43
23	IS 9640 : 1980	Specification for split spoon sampler	CED 43
24	IS 9011 : 1978	Specification for skip suspension gear for winding in mines	MED 8
25	IS 13468 : 1992	Apparatus for Determination of Dry Density of Soil by Core Cutter Method-	CED 43
26	IS 9516 : 1980	Specification for heat resisting steels	MTD 16
27	IS 13352 : 1992	Stock for forgings produced from continuously cast blooms, billets and slabs - Specification	MTD 16
28	IS 5095 : 1998	End locating plugs	PGD 35
29	IS 7262 : 1996	Turning mandrels - Specification (First Revision)	PGD 35
30	IS 5224 : 1993	Qilseeds Milling Machinery - Oil Expellers Single Barrel - Specification (Second Revision)	FAD 13
31	IS 15831 : 2009	Grader - Citrus - Size Based	FAD 20
32	IS 7825 : 2004	Cylinder Type Hand Lawn Mower Specification (First Revision)	FAD 11
33	IS 11139 : 2019	Adjusters for control cables for moped - Specification (First Revision)	TED 2
34	IS 7587 : Part 1 : 2020	Cage Suspension Gear for Winding in Mines Part 1 General Requirements ( Second Revision )	MED 8
35	IS 13902 : Part 1 : 1993	Sockets for wire ropes for general purposes: Part 1 general characteristics and conditions of acceptance	MED 10
36	IS 12488 : 1988	Specification for haulage rope cappels	MED 8
37	IS 13221 : 1991	Textile machinery – Cams, faller screw for screw gill jute drawing frame – Specification	TXD 14
38	IS 12526 : 1988	Specification for bucket for shaft sinking operations in mines	MED 8
39	IS 1296 : 1989	Household sewing machine - Presser foot - Specification (Third Revision)	MED 29
40	IS 1297 : 1991	Household sewing machines presser bar - Specification (Third Revision)	MED 29
41	IS 13417 : 1992	Code of practice for heat treatment of steels	MTD 22
42	IS 8534 : Part 1 : 2017	Mine tub couplings and drawbars for use in mines: Part 1 specification	MED 8

Classification Details

Group	:	Metals, Alloys and Metal Products (including Steel Products)
Sub Group	:	Alloy steels and forgings
Sub Sub Group	:	Alloy steel
Aspect	:	Product Specification
Certification	:	Mandatory Certification
Relevant Ministries	:	Ministry of Steel, Ministry of Commerce and Industry - Department for Promotion of Industry and Internal Trade (DPIIT)
Sustainable development Goals :
Short Commom Man's Title	:	Case Hardening Steels
ITC-HS Code	:
Degree of Equivalence	:	Not Equivalent
Identical/Equivalent International Standard(s)	:	ISO 683-3
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
2	Licensees email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 4432 : 1988

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 1

Gazette Document : 0

License : 5

Product Manual & SIT : 1

Laboratory : 4

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 4432 : 1988

List of Expired or Cancelled Licenses under IS : IS 4432 : 1988

List of laboratories for : IS 4432 : 1988

List of Amendement(s) for : IS 4432 : 1988

List of Gazette Document(s) for : IS 4432 : 1988

List of Corigenda Document(s) for : IS 4432 : 1988

List of Product Manuals & SIT