Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 803:1976
Reviewed In : 2022
Reaffirmed but not taken up for revision

IS Title/आईएस शीर्षक : Code of Practice for Design, Fabrication and Erection of Vertical Mild Steel Cylindrical Welded Oil Storage Tanks (First Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 1

Number of Amendments/संशोधनों की संख्या : 1

Aspect/पक्ष : Code of Practice

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : December, 2022

Technical Department/तकनीकी विभाग : CED (Civil Engineering Department)

Technical Committee/तकनीकी समिति : CED 07 (Structural Engineering And Structural Sections Sectional Committee)

Member Secretary/सदस्य सचिव : PRADEEP SINGH SHEKHAWAT (SCIENTIST-E)

Other Details

Indian Standard

Click to download

Amendment : 1

Click to download

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 803:1976
Reviewed In : 2022
Reaffirmed but not taken up for revision :

1	IS 816:1969 Reviewed In : 2023 Reaffirmed but not taken up for revision	Code of practice for use of metal arc welding for general construction in mild steel (First Revision)	MTD 11
2	IS 812:2024 ISO/TR 25901-4:2016	Glossary of terms relating to welding and cutting of metals	MTD 11
3	IS 813:1986	Scheme Of Symbols For Welding	MTD 11
4	IS 1730:1989 Reviewed In : 2019 Reaffirmed but not taken up for revision	Steel Plates, Sheets Strips and Flats for Structural and General Engineering Purposes - Dimensions (Second Revision)	CED 7
5	IS 226:1975	Structural steel (Standard quality)	MTD 4
6	IS 823:1964	Code of procedure for manual metal arc welding of mild steel	MTD 11
7	IS 961:1975	Structural steel (high tensile)	MTD 4
8	IS 2002:2024	Steel plate for pressure vessel for intermediate and high temperature service including boilers (Third Revision)	MTD 4
9	IS 2041:2024	Steel plates for pressure vessels used at moderate and low temperature - Specification (Third Revision)	MTD 4
10	IS 2062:2011	Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)	MTD 4
11	IS 1852:1985	Specification for rolling and cutting tolerances for hot - Rolled steel products (Fourth Revision)	MTD 4
12	IS 1977:1996	Low Tensile Structural Steels	MTD 4
13	IS 808:2021	Dimensions for hot rolled steel beam, column, channel and angle sections (Third Revision)	CED 7
14	IS 1030:1998	Carbon steel castings for general engineering purposes - Specification (Fifth Revision)	MTD 14
15	IS 814:2004	Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)	MTD 11
16	IS 1978:1982	Line Pipe	MTD 19
17	IS 1979:1985	High Test Line Pipe	MTD 19
18	IS 1239 (Part 2):2011	Steel tubes, tubulars and other steel fittings - Specification: Part 2 steel pipe fittings (Fifth Revision)	MTD 19
19	IS 6392:1971	Steel Pipes Flanges — Specification ( First Revision )	MTD 19
20	IS 1367 (Part 1):2014 ISO 8992 : 2005	Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision)	PGD 37
21	IS 1367 (Part 2):2002 ISO 4759-1	Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision)	PGD 37
22	IS 1367 (Part 3):2017 ISO 898-1 : 2013	Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)	PGD 37
23	IS 1367 (Part 5):2018 ISO 898-5 : 2012	Technical supply conditions for threaded steel fasteners: Part 5 mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (Fourth Revision)	PGD 37
24	IS 1367 (Part 6):2025 ISO 898-2 : 2022	Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)	PGD 37
25	IS 1367 (Part 7):1980	Technical supply conditions for tHreadeD steel fasteners: Part 7 mechanical properties and test methods for nuts without specified proof loads (Second Revision)	PGD 37
26	IS 1367 (Part 8):2020 ISO 2320 : 2015	Technical Supply Conditions for Threaded Steel Fasteners Part 8 Prevailing Torque Type Steel Nuts — Functional Properties ( Fifth Revision )	PGD 37
27	IS 1367 (Part 10):2002 ISO 6157-2	Technical supply conditions for threaded steel fasteners: Part 10 surface discontinuities - Nuts (Third Revision)	PGD 37
28	IS 1367 (Part 11):2024 ISO 4042 : 2022	Technical Supply Conditions for Threaded Steel Fasteners Part 11 Electroplated Coating Systems ( Fourth Revision )	PGD 37
29	IS 1367 (Part 12):1981	Technical supply conditions for threaded steel fasteners: Part 12 phosphate coatings on threaded fasteners (Second Revision)	PGD 37
30	IS 1367 (Part 13):2020 ISO 10684 : 2004	Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision )	PGD 37
31	IS 1367 (Part 14):1984	Technical Supply Conditions for Threaded Steel Fasteners - Part 14 : Stainless Steel Threaded Fasteners (Second Revision)	PGD 37
32	IS 1367 (Part 14/Sec 1):2023 ISO 3506-1 : 2020	Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless - Steel fasteners section 1 bolts, screws and studs (Fourth Revision)	PGD 37
33	IS 1367 (Part 14/Sec 2):2023 ISO 3506-2 : 2020	Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless steel Fasteners Section 2 Nuts (Fourth Revision)	PGD 37
34	IS 1367 (Part 14/Sec 3):2018 ISO 3506-3 : 2009	Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless steel fasteners section 3 set screws and similar fasteners not under tensile stress (Fourth Revision	PGD 37
35	IS 1367 (Part 16):2002 ISO 8991	Technical supply conditions for threaded steel fasteners: Part 16 designation system for fasteners (Third Revision)	PGD 37
36	IS 1367 (Part 17):2023 ISO 3269 : 2019	Technical supply conditions for threaded steel fasteners: Part 17 inspections, sampling and acceptance procedure (Fourth Revision)	PGD 37
37	IS 1367 (Part 18):1996	Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 18 packaging (Third Revision)	PGD 37
38	IS 1367 (Part 19):1997 ISO 3800	Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 19 axial load fatigue testing of bolts, screws and studs	PGD 37
39	IS 1367 (Part 20):1996 ISO 898-7	Industrial fasteners - Threaded steel fasteners - Technical supply conditions - Mechanical properties: Part 20 torsional - Test and mlnimum torques for bolts and screws with nominal diameters 1 mm to 10 mm	PGD 37
40	IS 875 (Part 1):1987	Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 1 dead loads - Unit weights of building materials and stored materials (Second Revision)	CED 37
41	IS 875 (Part 2):1987 Reviewed In : 2023 Decision taken to Reaffirm and Archive	Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 2 imposed loads (Second Revision)	CED 37
42	IS 875 (Part 5):1987 Reviewed In : 2023 Decision taken to Reaffirm and Archive	Design loads (Other Than Earthquake) for buildings and structures - Cod of practice for : Part 5 special loads and load combinations (Second Revision)	CED 37
43	IS 817:1966 Reviewed In : 2023 Reaffirmed but not taken up for revision	Code of practice for training and testing of metal arc welders (Revised)	MTD 11
44	IS 1182:1983	Recommended - Practice for radiographic examination of fusion welded butt joints in steel plates (Second Revision)	MTD 21
45	IS 2595:2008	Industrial radiographic testing - Code of practice (Second Revision)	MTD 21
46	IS 875 (Part 4):2021	Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 4 snow loads (Second Revision)	CED 37
47	IS 875 (Part 3):2015	Design Loads (Other than Earthquake) for Buildings and Structures - Code of Practice Part 3 Wind Loads ( Third Revision )	CED 37

International Standards Referred In IS 803:1976
Reviewed In : 2022
Reaffirmed but not taken up for revision

Standard contains no Cross Referenced International Standard.

IS 803:1976
Reviewed In : 2022
Reaffirmed but not taken up for revision is Referred in following Indian Standards :

1	IS 9444 : 2007	Code of practice for installation of oil supply units for fuel - fired furnaces (First Revision)	MTD 26
2	IS 9964 : Part 2 : 1981	Recommendations for maintenance and operation of petroleum storage tanks: Part 2 inspection	CED 7
3	IS 2683 : 1980	Guide for installation of impregnation plants for timber	CED 9
4	IS 9178 : Part 3 : 1980	Criteria for Design of Steel Bins for Storage of Bulk Materials - Part 3 : Bins Designed for Mass Flow and Funnel Flow	CED 38
5	IS 9964 : Part 1 : 1981	Recommendations for maintenance and operation of petroleum storage tanks: Part 1 preparation of tank for safe entry and work	CED 7
6	IS 5521 : 1980	Specification for steel tanks for storage of molasses (First Revision)	FAD 2
7	IS 4682 : Part 1 : 1994	Code of practice for lining of vessels and equipment for chemical processes: Part 1 rubber lining (First Revision)	MED 17
8	IS 4682 : Part 4 : 1998	Code of practice for lining of vessels and equipment for chemical processes: Part 4 lining with sheet thermoplastics (First Revision)	MED 17
9	IS 4682 : Part 8 : 1974	Code of practice for lining of vessels and equipment for chemical processes Part 8 Precious metal	MED 17
10	IS 4682 : Part 3 : 1969	Code of practice for lining of vessels and equipment for chemical processes: Part 3 lead lining	MED 17
11	IS 4682 : Part 7 : 1974	Code of practice for lining of vessels and equipment for chemical processes: Part 7 corrosion and heat resistant metals	MED 17
12	IS 4682 : Part 10 : 1974	Code of practice for lining of vessels and equipment for chemical processes: Part 10 brick and tile	MED 17
13	IS 4682 : Part 9 : 1974	Code of practice for lining of vessels and equipment for chemical processes: Part 9 titanium	MED 17

Classification Details

Group	:	Civil Engineering Design and Construction
Sub Group	:	Steel and Aluminium Structures
Sub Sub Group	:	Steel (including transmission line towers) & aluminium structures and their construction
Aspect	:	Code of Practice
Certification	:	None
Relevant Ministries	:
Sustainable development Goals :
Short Commom Man's Title	:	Cylindrical Oil Storage tanks - their Fabrication and Erection using Mild Steel
ITC-HS Code	:	N/A
Degree of Equivalence	:
Identical/Equivalent International Standard(s)	:
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 803 : 1976

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 1

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 803 : 1976

List of Expired or Cancelled Licenses under IS : IS 803 : 1976

List of laboratories for : IS 803 : 1976

List of Amendement(s) for : IS 803 : 1976

List of Gazette Document(s) for : IS 803 : 1976

List of Corigenda Document(s) for : IS 803 : 1976

List of Product Manuals & SIT