Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 15657:2021
ISO 13709

IS Title/आईएस शीर्षक : Centrifugal pumps for petroleum petrochemical and natural gas industries

Superseding IS/सुपरसीडिंग आईएस : IS 15657 : 2006

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : 1

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Code of Practice

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : MED (Mechanical Engineering Department)

Technical Committee/तकनीकी समिति : MED 20 (Pumps Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. AMAN DHANAWAT (SCIENTIST-C)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 2

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 15657:2021
ISO 13709
:

1	IS 554:1999 ISO 7-1	Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision)	PGD 37
2	IS 919 (Part 1):2014 ISO 286-1 : 2010	Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on Linear Sizes Part 1 Basis of Tolerance, Deviation and Fits (Third Revision)	PGD 37
3	IS 919 (Part 2):2014 ISO 286-2	Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes: Part 2 tables of standard tolerance classes and limit deviation for holes and shafts (Second Revision)	PGD 37
4	IS 2291:1990 ISO 3117-1977 Decision taken to Reaffirm and Archive	Tangential keys and keyways (Third Revision)	PGD 33
5	IS 2643:2005	Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision)	PGD 37
6	IS 3824:2014 ISO 281 : 2007	Rolling bearings -- Dynamic load ratings and rating life (Third Revision)	PGD 13
7	IS 4218 (Part 2):2001 ISO 261	ISO general purpose metric screw threads: Part 2 general plan (Second Revision)	PGD 37
8	IS 4218 (Part 3):2025 ISO 724 : 2023	ISO general purpose metric screw threads: Part 3 basic dimensions (Second Revision)	PGD 37
9	IS 4218 (Part 4):2025 ISO 262 : 2023	ISO general purpose metric screw threads: Part 4 selected sizes for screws, bolts and nuts (Second Revision)	PGD 37
10	IS 5571:2009 IEC 60079-14	Guide for selection and installation of electrical equipment in hazardous areas (Other Than Mines) (Third Revision)	ETD 22
11	IS 5935 (Part 1):2019 ISO 5753-1 : 2009	Rolling bearings -- Internal clearance: Part 1 Radial internal clearance for radial bearings (Second Revision)	PGD 13
12	IS 7310 (Part 1):2019 ISO 9606-1 : 2012	Qualification Testing of Welders - Fusion Welding Part 1 Steels (First Revision)	MTD 11
13	IS 7310 (Part 2):2019 ISO 9606-2 : 2004	Qualification Test of Welders - Fusion Welding Part 2 Aluminium and Aluminium Alloys ( First Revision )	MTD 11
14	IS 7310 (Part 3):2019 ISO 9606-3 : 1999	Approval Testing of Welders - Fusion Welding Part 3 Copper and Copper Alloys ( First Revision )	MTD 11
15	IS 7310 (Part 5):2019 ISO 9606-5 : 2000	Approval Testing of Welders - Fusion Welding Part 5 Titanium and Titanium Alloys, Zirconium and Zirconium Alloys (First Revision)	MTD 11
16	IS 11064:1984 IEC 60079-13	Guide for construction and use of rooms or buildings protected by pressurization, for installation of electrtcal apparatus for explosive gas atmospheres	ETD 22
17	IS 14962 (Part 1):2018 ISO 965-1 : 2013	ISO general purpose metric screw threads - Tolerances: Part 1 principles and basic data (First Revision)	PGD 37
18	IS 14962 (Part 2):2001 ISO 965 : Part 2	ISO general purpose metric screw threads - Tolerances: Part 2 limits of sizes for general purpose external and internal screw threads - Medium quality	PGD 37
19	IS 14962 (Part 3):2022 ISO 965-3: 2021	ISO general purpose metric screw threads - Tolerances: Part 3 deviations for constructional screw threads	PGD 37
20	IS 14962 (Part 4):2023 ISO 965-4 : 2021	ISO general purpose metric screw threads - Tolerances: Part 4 limits of sizes for hot - Dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or g after galvanizing	PGD 37
21	IS 14962 (Part 5):2001 ISO 965 : Part 5	ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing	PGD 37
22	IS 15999 (Part 1):2021 IEC 60034-1: 2017	Rotating Electrical Machines Part 1 Rating and Performance (First Revision)	ETD 15
23	IS 16537:2016 ISO 21049 : 2004	Pumps - Shaft sealing systems for centrifugal and rotary pumps	MED 20
24	IS 16811:2018 ISO 14120 : 2015	Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards	MED 40
25	IS/ISO/TR 17766:2005 IS/ISO/TR 17766 : 2005	Centrifugal pumps handling viscous liquids - Performance corrections	MED 20
26	IS/ISO 21940-11:2016 ISO 21940-11 : 2016	Mechanical vibration - Rotor balancing: Part 11 procedures and tolerances for rotors with rigid behaviour	MED 28
27	IS/ISO 21940-12:2016 ISO 21940-12 : 2006	Mechanical vibration - Rotor balancing: Part 12 procedures and tolerances for rotors with flexible behaviour	MED 28
28	IS/IEC 60079:2017 IEC 60079-0 : 2017	Explosive Atmospheres Part 0 Equipment — General Requirements ( Third Revision )	ETD 22
29	IS/IEC 60079-1:2007	Explosive Atmospheres - Part 1 : Equipment Protection by Flameproof Enclosures "d"	ETD 22
30	IS/IEC 60079-2:2014 IEC 60079-2 : 2014	Explosive atmospheres: Part 2 equipment protection by pressurized enclosure ''p'' (First Revision)	ETD 22
31	IS/IEC 60079-5:2015 IEC 60079-5:2015+AMD1:2022	Explosive atmospheres: Part 5 equipment protection by powder filling ''q'' (First Revision)	ETD 22
32	IS/IEC 60079-6:2020 IEC 60079-6:2020(Ed 4.1)	Explosive atmospheres: Part 6 equipment protection by liquid immersion "O" (First Revision)	ETD 22
33	IS/IEC 60079-7:2017 IEC 60079-7:2017 (Ed 5.1)	Explosive atmospheres: Part 7 equipment protection by increased safety "E" (First Revision)	ETD 22
34	IS/IEC 60079-10-2:2015 IEC 60079-10-2 : 2015	Explosive atmospheres: Part 10 classification of areas: Sec 2 explosive dust atmospheres (First Revision)	ETD 22
35	IS/IEC 60079-11:2023 IEC 60079-11:2023	Explosive Atmospheres Part 11 Equipment Protection by Intrinsic Safety “i” (First Revision)	ETD 22
36	IS/IEC 60079:2017 IEC 60079-13 : 2017	Explosive atmospheres: Part 13 equipment protection by pressurized room "P"	ETD 22
37	IS/IEC 60079:2017 IEC 60079-15:2017	Explosive atmospheres: Part 15 equipment protection by type of protection "N" (First Revision)	ETD 22
38	IS/IEC 60079-16:1990 IEC 60079-16 : 1990	Electrical apparatus for explosive gas atmospheres: Part 16 artificial ventilation for the protection of analyzer(S) houses	ETD 22
39	IS/IEC 60079-17:2023	Explosive atmospheres: Part 17 electrical installations inspection and maintenance (First Revision)	ETD 22
40	IS/IEC 60079-18:2014 IEC 60079-18 : 2014	Explosive atmospheres: Part 18 equipment protection by encapsulation ''m'' (Second Revision)	ETD 22
41	IS/IEC 60079-19:2019 IEC 60079-19:2019	Explosive atmospheres: Part 19 equipment repair, overhaul and reclamation (First Revision)	ETD 22
42	IS/IEC 60079-20-1:2010	Explosive atmospheres: Part 20 material characteristics for gas and vapour classification: Sec 1 test methods and data	ETD 22
43	IS/IEC 60079-25:2020 IEC 60079-25:2020	Explosive atmospheres: Part 25 intrinsically safe electrical systems (First Revision)	ETD 22
44	IS/IEC 60079-26:2021 IEC 60079-26:2021	Explosive Atmospheres Part 26 Equipment with Equipment Protection Level (EPL) GA ( First Revision )	ETD 22
45	IS/IEC 60079-27:2008 IEC 60079-27 : 2008	Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)	ETD 22
46	IS/IEC 60079-28:2015 IEC 60079-28 : 2015	Explosive atmospheres: Part 28 protection of equipment and transmission systems using optical radiation (First Revision)	ETD 22
47	IS/IEC 60079-29-4:2009 IEC 60079-29-4 : 2009	Explosive atmospheres: Part 29 gas detectors: Sec 4 performance requirements of open path detectors for flammable gases	ETD 22
48	IS/IEC 60079-29-1:2016 IEC 60079-29-1 : 2016	Explosive atmospheres Part 29 Gas detectors Section 1 Performance Requirements of Detectors for Flammable Gases (First Revision)	ETD 22
49	IS/IEC 60079-29-2:2015 IEC 60079-29-2 : 2015	Explosive atmospheres: Part 29 gas detectors: Sec 2 selection, installation, use and maintenance of detectors for flammable gases and oxygen (First Revision)	ETD 22
50	IS/IEC 60079-30-1:2007	Explosive atmospheres: Part 30 electrical resistance trace heating: Sec 1 general and testing requirements	ETD 22
51	IS/IEC 60079-30-2:2007	Explosive atmospheres: Part 30 electrical resistance trace heating: Sec 2 application guide for design, installation and maintenance	ETD 22
52	IS/IEC/IEEE 60079-30-1:2015 IEC/IEEE60079-30-1 : 2015	Explosive Atmospheres Part 30 Electrical Resistance Trace Heating Section 1 General and testing requirements ( First Revision )	ETD 22
53	IS/IEC 60079-31:2013 IEC 60079-31 : 2013	Explosive atmospheres: Part 31 equipment dust ignition protection by enclosure "T" (First Revision)	ETD 22
54	IS/IEC 60079-35-2:2011 IEC 60079-35-2 : 2011	Explosive Atmospheres Part 35 Caplights for use in Mines Susceptible to Firedamp Section 2 Performance and other safety related matters	ETD 22

International Standards Referred In IS 15657:2021
ISO 13709

1	ISO 4200 : 0 : 0 0
2	ISO 14691 : 0 : 0 0
3	ISO 7005 : 1 : 0 0
4	ISO 7005 : 2 : 0 0
5	ISO 8501 : 0 : 0 0
6	ISO 9906 : 0 : 0 0
7	ISO 10438 : 0 : 0 0
8	ISO 10441 : 0 : 0 0
9	ISO 10721 : 2 : 0 0
10	ISO 14691 : 0 : 0 0
11	ISO 15156 : 1 : 0 0
12	ISO 15609 : 0 : 0 0
13	ISO 15649 : 0 : 0 0
14	IEC 60034 : 2 : 1
15	EN 953 : 0 : 0 0
16	EN 13445 : 0 : 0 0
17	EN 13463 : 1 : 0 0

IS 15657:2021
ISO 13709
is Referred in following Indian Standards :

Standard contains no Cross Referenced Indian Standard.

Classification Details

Certification	:
Group	:	Pumps, Engines and Compressors
Sub Group	:	Pumps, Compressors and Components
Sub Sub Group	:	Utility and Industrial Application Pumps
Aspect	:	Code of Practice

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 2

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details