Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 1885 (Part 85):2003
IEC 60050(161)

IS Title/आईएस शीर्षक : Electrotechnical vocabulary: Part 85 electromagnetic compatibility

Superseding IS/सुपरसीडिंग आईएस : 1885 : PART 36 : , 1885 : PART 64 : SEC 1,2

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Code of Practice

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : LITD (Electronics and Information Technology Department)

Technical Committee/तकनीकी समिति : LITD 09 (Electromagnetic Compatibility Sectional Committee)

Member Secretary/सदस्य सचिव : DEVANSH DEOLEKAR

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 1885 (Part 85):2003
IEC 60050(161)
:

1	IS 1885 (Part 36):1972	Electrotechnical vocabulary: Part 36 Interference	LITD 09
2	IS 1885 (Part 64/Sec 1):1987 IEC 50(704)	Electrotechnical vocabulary: Part 64 Electromagnetic compatibility, Sec 1 General terms	LITD 02
3	IS 1885 (Part 64/Sec 2):1987	Electrotechnical vocabulary: Part 64 Electromagnetic compatibility, Sec 2 Specific terms	LITD 02

International Standards Referred In IS 1885 (Part 85):2003
IEC 60050(161)

Standard contains no Cross Referenced International Standard.

IS 1885 (Part 85):2003
IEC 60050(161)
is Referred in following Indian Standards :

1	IS/IEC 60947 : Part 4 : Sec 2 : 2011	Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 2 a.c semiconductor motor controllers and starters (First Revision)	ETD 07
2	IS 14700 : Part 4 : Sec 24 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 24 test methods for protective devices for HEMP conducted disturbance (First Revision)	LITD 09
3	IS 14700 : Part 4 : Sec 7 : 2017	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 7 general guide on harmonic and interharmonics measurements and instrumentation, for power supply systems and equipment eonnected thereto (First Revision)	LITD 09
4	IS 6873 : Part 3 : 2015	Limits and methods of measurement of radio disturbance characteristics: Part 3 sound and television broadcast receivers and associated equipment (Third Revision)	LITD 09
5	IS 14700 : Part 4 : Sec 4 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 4 electrical fast transient / burst immunity test (Second Revision)	LITD 09
6	IS 14700 : Part 4 : Sec 2 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 2 electrostatic discharge immunity test (Second Revision)	LITD 09
7	IS 14700 : Part 4 : Sec 25 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 25 HEMP immunity test methods for equipment and systems	LITD 09
8	IS 14700 : Part 4 : Sec 14 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 14 voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase	LITD 09
9	IS 14700 : Part 4 : Sec 33 : 2018	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 33 measurement methods for high - Power transient parameters	LITD 09
10	IS 10052 : Part 1 : Sec 3 : 2018	Radio Disturbance and Immunity Measuring Apparatus and Methods — Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 3 Ancillary equipment — Disturbance power	LITD 09
11	IS 10052 : Part 4 : Sec 4 : 2018	Radio disturbance and immunity measuring apparatus and methods - Specificaiton: Part 4 uncertainties, statistics and limit modelling: Sec 4 statistics of complaints and a model for the calculation of limits for the protection of radio services	LITD 09
12	IS 10052 : Part 1 : Sec 5 : 2018	Radio Disturbance and Immunity Measuring Apparatus and Methods — Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 5 Antenna calibration sites and reference test sites for 5 MHz to 18 GHz	LITD 09
13	IS 15039 : 2018	Information technology equipment - Immunity characteristics - Limits and methods of measurement (First Revision)	LITD 09
14	IS 10052 : Part 2 : Sec 1 : 2018	Specification for radio disturbance and immunity measuring apparatus and methods: Part 2 methods of measurement of disturbances and immunity: Sec 1 conducted disturbance measurements (Second Revision)	LITD 09
15	IS 12233 : Part 1 : 2018	Radio interference characteristics of overhead power lines and high - Voltage equipment: Part 1 description of phenomena	LITD 09
16	IS 12233 : Part 3 : 2019	Radio Interference Characteristics of Overhead Power Lines and High-Voltage Equipment Part 3 Code of Practice for Minimizing the Generation of Radio Noise ( Second Revision)	LITD 09
17	IS 14700 : Part 6 : Sec 1 : 2019	Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 1 Immunity standard for residential, commercial and light-industrial environments ( First Revision )	LITD 09
18	IS 14700 : Part 6 : Sec 2 : 2019	Electromagnetic Compatibility ( EMC ) Part 6 Generic Standards Section 2 Immunity standard for industrial environments ( First Revision )	LITD 09
19	IS 6873 : Part 5 : 2019	Limits and Methods of Measurement of Radio Disturbance Characteristics Part 5 Electrical Lighting and Similar Equipment ( Third Revision )	LITD 09
20	IS/IEC 61204 : Part 3 : 2016	Low-Voltage Switch Mode Power Supplies Part 3 Electromagnetic Compatibility ( EMC )	ETD 31
21	IS 15040 : 2020	Radio Disturbance Characteristics for Protection of Receivers used on Board Vehicles, Boats and Internal Combustion Engines — Limits and Methods of Measurement ( Second Revision )	LITD 09
22	IS/IEC 61800 : Part 5 : Sec 1 : 2016	Adjustable Speed Electrical Power Drive Systems Part 5 Safety Requirements Section 1 Electrical, thermal and energy	ETD 31
23	IS 14700 : Part 4 : Sec 17 : 2018	Electromagnetic Compatiblity (EMC) Part 4 Testing & Measurement Techniques Section 17 Ripple on d.c input Power Port Immunity Test	LITD 09
24	IS 14700 : Part 4 : Sec 5 : 2019	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 5 surge immunity test (First Revision)	LITD 09
25	IS 12552 : 2020	Sound and Television Broadcast Receivers and Associated Equipment — Immunity Characteristics — Limits and Methods of Measurement ( Second Revision )	LITD 09
26	IS 14700 : Part 3 : Sec 2 : 2020	Electromagnetic Compatibility (EMC) Part 3 Limits Section 2 Limits for harmonic current emissions ( equipment input current ? 16 A per phase ) ( Third Revision )	LITD 09
27	IS 14700 : Part 4 : Sec 6 : 2016	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 6 immunity to conducted disturbances, induced by radio - Frequency fields	LITD 09
28	IS 14700 : Part 4 : Sec 13 : 2016	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 13 harmonics and interharmonics including mains signaling at a.c. power port, low frequency immunity test	LITD 09
29	IS 14700 : Part 4 : Sec 34 : 2017	Electromagnetic compatibility (EMC): Part 4 testing and measurement techniques: Sec 34 voltage dips, short interruptions and voltage variations immunity tests for current more than 16 A per phase	LITD 09
30	IS 14700 : Part 4 : Sec 35 : 2018	Electromagnetic Compatibility (EMC) Part 4 Testing & Measurement Techniques Section 35 HPEM Simulator Compendium	LITD 09
31	IS 1885 : Part 25 : 1967	Electrotechnical vocabulary: Part 25 radiolocation and radio - Navigation	LITD 12
32	IS 6873 : Part 4 : 1999	Limits and Methods of Measurement of Radio Disturbance Characteristics - Part 4 : Industrial, Scientific and Medical (ISM) Radio-frequency Equipment	LITD 09
33	IS 10052 : Part 1 : Sec 1 : 2019	Radio Disturbance and Immunity Measuring Apparatus and Methods — Specification Part 1 Radio Disturbance and Immunity Measuring Apparatus Section 1 Measuring apparatus ( Third Revision )	LITD 09
34	IS 12233 : Part 2 : 2017	Radio interference characterstics of overhead power lines and high - Voltage equipment: Part 2 methods of measurement and procedure for determining limits (First Revision)	LITD 09
35	IS/IEC 62311 : 2007	Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz)	LITD 09
36	IS/ISO 50004 : 2020	ENERGY MANAGEMENT SYSTEMS GUIDANCE FOR THE IMPLEMENTATION MAINTENANCE AND IMPROVEMENT OF AN ISO 50001 ENERGY MANAGEMENT SYSTEM First Revision	MED 39
37	IS 17607 : 2021	Polyolefin agricultural twines	TXD 09
38	IS/IEC 60862 : Part 1 : 2003	Surface acoustic wave (SAW) filters of assessed quality: Part 1 generic specification	LITD 24
39	IS 12746 : Part 2 : 1989	Telecontrol equipment and systems: Part 2 environmental conditions and power supplies	LITD 10
40	IS 14700 : Part 4 : Sec 3 : 2018	Electromagnetic Compatibility (EMC) Part 4 Testing and Measurement Techniques Section 24 Test methods for protective devices for HEMP conducted disturbance ( First Revision )	LITD 09
41	IS 6873 : PART 2 : SEC 2 : 2019	Limits and Methods of Measurement of Radio Disturbance Characteristics Part 2 Electromagnetic Compatibility (EMC) — Requirements for Household Appliances, Electric Tools and Similar Apparatus Section 2 Emission — Product family standard ( Forth Revision )	LITD 09
42	IS 10052 : Part 1 : Sec 4 : 2018	Radio disturbance and immunity measuring apparatus and methods - Specificaiton: Part 1 radio disturbance and immunity measuring apparatus: Sec 4 antennas and test sites for radiated disturbance measurements	LITD 09
43	IS 6873 : PART 2 : SEC 1 : 2015	Withdrawal	LITD 09
44	IS 18254 : 2023	Ergonomics of the physical environment Application of International Standards to people with special requirements Adoption of ISO 28803: 2012	PGD 15
45	IS 18332 : 2023	Geometrical product specifications (GPS) ï¿½ Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty for CMMs using single and multiple stylus contacting probing systems	PGD 25

Classification Details

Certification	:
Group	:	Electronic and Telecom equipments, components and devices
Sub Group	:	Electronic components and devices
Sub Sub Group	:	Electrotechnical Vocabulary
Aspect	:	Code of Practice

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details