Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 1828 (Part 1):2015
IS 1828(Part 1):2014 / ISO 7500-1 : 2004

IS Title/आईएस शीर्षक : Metallic materials - Verification of static uniaxial testing machines: Part 1 tension/compression testing machines - Verification and calibration of the force - Measuring system (Fourth Revision) (Withdrawn)

Superseded by IS/प्रतिस्थापित आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : 4

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Methods of tests

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : MTD (Metallurgical Engineering Department)

Technical Committee/तकनीकी समिति : MTD 03 (Mechanical Testing of Metals Sectional Committee Sectional Committee)

Member Secretary/सदस्य सचिव : Vipul Bohara (SCIENTIST-C)

Other Details

Gazette Document : 2

Click to download

Classification details for: IS 1828 : Part 1 : 2015

Click to view

Cross Reference Details

Click to view

Cross Reference Details

Indian Standards Referred In IS IS 1828 (Part 1):2015
IS 1828(Part 1):2014 / ISO 7500-1 : 2004
:

1	IS 4169:2014 ISO 18265:2003	Metallic materials - Calibration of force proving instruments used for the verification of uniaxial testing machines (Second Revision)	MTD 03

International Standards Referred In IS 1828 (Part 1):2015
IS 1828(Part 1):2014 / ISO 7500-1 : 2004

1	ISO 376 : 0 : 0 0

IS 1828 (Part 1):2015
IS 1828(Part 1):2014 / ISO 7500-1 : 2004
is Referred in following Indian Standards :

1	IS 3196 : Part 3 : 2012	Welded low carbon steel cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Part 3 methods of test (Fifth Revision)	MED 16
2	IS 13975 : 1994	Axial (End - To - End) compression strength of composite cans, tubes and cores - Method of test	CHD 16
3	IS 13237 : 1991	Metallic foil - Tension testing	MTD 03
4	IS 5245 : Part 2 : 2013	Methods for splicing of wire ropes: Part 2 wire rope sling legs with ferrule - Secured eye terminal (First Revision)	MED 10
5	IS/ISO 1834 : 1999	Short link chain for lifting purposes - General conditions of acceptance	MED 14
6	IS 12375 : Part 5 : 1998	Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 5 : Determination of Resistance to Static Load of Head and Neck Region of Stemmed Femoral Components	MHD 02
7	IS 12375 : Part 3 : 1993	Implants for Surgery - Partial and Total Hip Joint Prostheses - Part 3 : Determination of endurance properties of stemmed femorel components without application of torsion	MHD 02
8	IS 16635 : 2017	Geosynthetics - Wide - Width tensile test	TXD 30
9	IS 16774 : 2018	Flexible cellular polymeric materials - Determination of hardness (Indentation Technique)	PCD 29
10	IS 13360 : Part 5 : Sec 1 : 2018	Plastics - Methods of testing: Part 5 mechanical properties section 1 determination of tensile properties - General requirements (First Revision)	PCD 27
11	IS/ISO 3076 : 2012	Round steel short link chains for general lifting purposes - Medium tolerance sling chains for chain slings - Grade 8 (First Revision)	MED 14
12	IS 15060 : 2018	Geosynthetics – Tensile test for joint seams by wide-width strip method (first revision)	TXD 30
13	IS 15554 : 2018	Sintered metal materials, excluding hardmetals - Tensile test pieces (First Revision)	MTD 25
14	IS 7016 : Part 5 : 2019	Methods of Test for Coated and Treated Fabrics: Part 5 Rubber- or Plastics-Coated Fabrics - Determination of Coating Adhesion (Third Revision)	TXD 33
15	IS 8085 : Part 8 : 2019	Methods of Test for Footwear Part 8 Delamination Resistance of Uppers	CHD 19
16	IS 1969 : Part 1 : 2018	Textiles – Tensile properties of fabrics – Part 1 Determination of maximum force and elongation at maximum force using the strip method (fourth revision)	TXD 01
17	IS 1969 : PART 2 : 2018	Textiles – Tensile properties of fabrics – Part 2 Determination of maximum force using the grab method (fourth revision)	TXD 01
18	IS/ISO 13935 : Part 1 : 2014	Textiles - Seam tensile properties of fabrics and made-up textile articles Part 1 Determination of maximum force to seam rupture using the strip method (first revision)	TXD 01
19	IS/ISO 13935 : Part 2 : 2014	Textiles - Seam tensile properties of fabrics and made-up textile articles Part 2 Determination of maximum force to seam rupture using the grab method (first revision)	TXD 01
20	IS 17369 : Part 1 : 2020	Geotextiles and geotextile-related products – Strength of internal structural junctions Part 1 Geocells	TXD 30
21	IS 1608 : Part 2 : 2020	Metallic Materials - Tensile Testing Part 2 Method of Test at Elevated Temperature ( Fourth Revision )	MTD 03
22	IS 17465 : 2020	Protective Clothing - Mechanical Properties - Determination of Resistance to Puncture	TXD 32
23	IS 3779 : 1994	Textiles - Sheeting cloth,cotton khadi,bleached	TXD 08
24	Is 15658 : 2021	Concrete Paving Blocks - Specification ( First Revision ) Amendment - 2	CED 05
25	IS/ISO 12619 : Part 13 : 2017	ROAD VEHICLES COMPRESSED GASEOUS HYDROGEN CGH2 AND HYDROGEN NATURAL GAS BLENDS FUEL SYSTEM COMPONENTS RIGID FUEL LINE IN STAINLESS STEEL	TED 26
26	IS 17328 : Part 1 : 2021	Nuclear fuel technology - Determination of uranium : Part 1 Determination of uranium in solutions, uranium hexafluoride and solids - Iron (II) reduction/potassium dichromate oxidation titrimetric method	CHD 30
27	IS 15537 : 2004	Injection equipment for medical use - Ampoules for injectables	MHD 12
28	IS 15941 : 2021	Jewellery and precious metals Determination of palladium in palladium alloys ICP-OES method using an internal standard element	MTD 10
29	IS/ISO 17268 : 2020	Gaseous Hydrogen Land Vehicle Refuelling Connection Devices	TED 26
30	IS 17417 : Part 1 : 2020	Metallic Materials - Dynamic Force Calibration for Uniaxial Fatigue Testing Part 1 Testing Systems	MTD 03
31	IS 1608 : Part 3 : 2018	Metallic materials - Tensile testing: Part 3 method of test at low temperature	MTD 03
32	IS 1608 : Part 1 : 2018	Metallic materials - Tensile testing: Part 1 method of test at room temperature (Fourth Revision)	MTD 03
33	IS 15756 : 2007	Metallic materials - Sheet and strip - Determination of tensile strain hardening exponent	MTD 03
34	IS 1367 : Part 14 : Sec 1 : 2018	Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless - Steel fasteners section 1 bolts, screws and studs (Fourth Revision)	PGD 37
35	IS 1367 : Part 14 : Sec 2 : 2018	Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless steel Fasteners Section 2 Nuts (Fourth Revision)	PGD 37

Classification Details

Certification	:
Group	:	Metals, Alloys and Metal Products (including Steel Products)
Sub Group	:	Heat treatment, metallography and testing
Sub Sub Group	:	Methods of mechanical testing of metals
Aspect	:	Methods of tests

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Gazette Document : 2

Classification details for: IS 1828 : Part 1 : 2015

Cross Reference Details

Cross Reference Details

Classification Details