Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Production and General Engineering Department

Programme of Work




PGD4 : Metal Forming Machines


  • Scope : Standardization in the field of various technical aspects of metal forming machines both by hot and cold processes and their machines (Presses, press brakes, shears, shear blades, moulds including plastic injection moulds, forging machines, nibs and dies for wire and tube drawing operations, aluminium diecasting dies, and their related tooling).
  • Liaison :
    ISO TC ISO/TC 29 / SC SC 8 - Tools for pressing and moulding - Observer (O)

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS 10068 (Part 2):2018
Press working die sets (Plain Type) - Specification: Part 2 centre post square die sets (First Revision)
August, 2024
-
Indigenous
2.
 IS 10068 (Part 3):1990
Press working die sets - Plain type - Specification: Part 3 centre post round die sets
April, 2022
-
Indigenous
3.
 IS 10068 (Part 4):1997
Press working die sets (Plain Type): Part 4 rear post rectangular die sets - Specification
April, 2022
-
Indigenous
4.
 IS 10068 (Part 5):1996
Press working die sets (Plain Type): Part 5 rear post square die sets - Specification
April, 2022
-
Indigenous
5.
 IS 10068 (Part 6):1996
Press working die sets (Plain Type): Part 6 rear post round die sets - Specification
April, 2022
-
Indigenous
6.
 IS 10068 (Part 1):2018
Press Working Die Sets (Plain Type) — Specification Part 1 Centre Post Rectangular Die Sets ( First Revision )
-
-
Indigenous
7.
 IS 10644:1983
Recommendation on preferred shut heights for mechanical presses
March, 2021
1
Indigenous
8.
 IS 10650:1983

Reaffirmed but not taken up for revision
Specification for pressure pins
March, 2021
1
Indigenous
9.
 IS 10731:2000
Presses - Slide holes for locating the shanks - Dimensions (First Revision)
March, 2021
-
Indigenous
10.
 IS 11344:1985
ISO 5407

Reaffirmed but not taken up for revision
Dimen - Sions for sintered carbide pellets used in heading dies
March, 2021
-
Not Equivalent
11.
 IS 11372:1985
Proforma for purchase specification and technical features for belt drop hammers
March, 2021
1
Indigenous
12.
 IS 11443 (Part 1):2016
ISO 6753-1 : 2005
Tools for pressing and moulding - Machined plates: Part 1 machined plates for press tools (Second Revision)
September, 2025
-
Indigenous
13.
 IS 11443 (Part 2):2003
ISO 6753-2
Tools for pressing and moulding - Machined plates: Part 2 machined plates for moulds (First Revision)
August, 2024
-
Indigenous
14.
 IS 11505:1986
ISO 5396
Recommendations on terminology of hardmetal heading diesISO title : hardmetal heading dies - Terminology)
March, 2021
-
Indigenous
15.
 IS 11524:1986
ISO 1651
Specification for carbide mandrels for tube drawing dies
March, 2021
-
Indigenous
16.
 IS 11684:1986

Reaffirmed but not taken up for revision
Test chart for spinning and planishing lathes
March, 2021
-
Indigenous
17.
 IS 11742:1986

Reaffirmed but not taken up for revision
Test chart for die sets
March, 2021
-
Indigenous
18.
 IS 12852:1989
Gap frame hydraulic presses up to 4000 KN - Recommendation on preferred capacities and dimensions
March, 2021
1
Indigenous
19.
 IS 12984:1990
Proforma for puruchase specification for plate bending machines
March, 2021
-
Indigenous
20.
 IS 14497:1997
Capacity rating and dimensions for trimming presses
August, 2024
-
Indigenous
21.
 IS 14757:2000
RECOMMENDATIONS ON PREFERRED CAPACITIES AND DIMENSIONS FOR STRAIGHT-SIDED COLUMN TYPE AND FOUR PILLAR TYPE HYDRAULIC PRESSES
March, 2021
-
Indigenous
22.
 IS 14758:2000
Forging machine tools - Glossary of terms
March, 2021
-
Indigenous
23.
 IS 14877 (Part 1):2000
Hydraulic presses - Straight sided column/C - Frame type: Part 1 test chart for geometrical accuracy
March, 2021
-
Indigenous
24.
 IS 14877 (Part 2):2002
Hydraulic presses - Straight sided column/C - Frame type: Part 2 test chart for technical (Performance) evaluation of presses and press brakes
August, 2024
-
Indigenous
25.
 IS 14878:2000
Test chart for plate bending machines
September, 2025
-
Indigenous
26.
 IS 15300:2016
ISO 8695 : 2010
Tools for pressing - Punches - Nomenclature and terminology (First Revision)
December, 2021
-
Identical under dual numbering
27.
 IS 15318:2003
ISO 8540
Open front mechanical power presses - Vocabulary
August, 2024
-
Indigenous
28.
 IS 15424 (Part 5):2022
ISO 9182-5:2020
Tools for pressing — Guide pillars: Part 5 Type D, end-locking pillars with flange (Second Revision)
-
Identical under dual numbering
29.
 IS 15424 (Part 3):2021
ISO 9182-3:2020
Tools for pressing — Guide pillars: Part 3 Type B, end-locking pillars (Second Revision)
September, 2025
-
Identical under dual numbering
30.
 IS 15424 (Part 1):2018
ISO 9182-1 : 2013
Tools for Pressing - Guide Pillars - Part 1 Types (First Revision)
May, 2023
-
Identical under dual numbering
31.
 IS 15424 (Part 2):2018
ISO 9182-2 : 2013
Tools for pressing - Guide pillars: Part 2 type A, straight pillars (First Revision)
May, 2023
-
Identical under dual numbering
32.
 IS 15424 (Part 4):2022
ISO 9182-4:2020
Tools for pressing — Guide pillars: Part 4 Type C, pillars with taper lead and bush (Second Revision)
-
Identical under dual numbering
33.
 IS 15448 (Part 1):2018
ISO 9448-1 : 2013
Tools for pressing - Guide bushes: Part 1 forms (First Revision)
August, 2024
-
Identical under dual numbering
34.
 IS 15448 (Part 10):2018
ISO 9448-10 : 2013
Tools for pressing - Guide bushes: Part 10 form E, gliding bushes, flanged, type 2 (First Revision)
May, 2023
-
Identical under dual numbering
35.
 IS 15448 (Part 11):2018
ISO 9448-11 : 2013
Tools for pressing - Guide bushes: Part 11 form F, ball cage bushes, flanged, type 2 (First Revision)
May, 2023
-
Identical under dual numbering
36.
 IS 15448 (Part 2):2017
ISO 9448-2 : 2013
Tools for pressing - Guide bushes: Part 2 form A, gliding bushes, plain, type 1 (First Revision)
August, 2024
-
Identical under dual numbering
37.
 IS 15448 (Part 3):2018
ISO 9448-3 : 2013
Tools for pressing - Guide bushes: Part 3 form B, ball cage bushes, plain, type 1 (First Revision)
August, 2024
-
Identical under dual numbering
38.
 IS 15448 (Part 4):2018
ISO 9448-4
Tools for pressing - Guide bushes: Part 4 form C, gliding bushes, headed, type 1 (First Revision)
August, 2024
-
Identical under dual numbering
39.
 IS 15448 (Part 5):2018
ISO 9448-5 : 2013
Tools for pressing - Guide bushes: Part 5 form D, ball cage bushes, headed, type 1 (First Revision)
August, 2024
-
Identical under dual numbering
40.
 IS 15448 (Part 6):2018
ISO 9448-6 : 2013
Tools for pressing - Guide bushes: Part 6 form E, gliding bushes, flanged, type 1 (First Revision)
May, 2023
-
Identical under dual numbering
41.
 IS 15448 (Part 7):2018
ISO 9448-7 : 2013
Tools for pressing - Guide bushes: Part 7 form F, ball cage bushes, flanged, type 1 (First Revision)
May, 2023
-
Identical under dual numbering
42.
 IS 15448 (Part 8):2018
ISO 9448-8 : 2013
Tools for pressing - Guide bushes: Part 8 form G, gliding bushes, stepped, type 1 (First Revision)
May, 2023
-
Identical under dual numbering
43.
 IS 15448 (Part 9):2018
ISO 9448-9 : 2013
Tools for pressing - Guide bushes: Part 9 form B, ball cage bushes, plain, type 2 (First Revision)
May, 2023
-
Identical under dual numbering
44.
 IS 15744:2007
Angular Deflection for "C" Frame Mechanical Presses — Specification
August, 2024
-
Indigenous
45.
 IS 15745:2007
Deflection for straight sided mechanical presses - Specification
August, 2024
-
Indigenous
46.
 IS 15746:2007
ANGULAR DEFLECTION FOR ‘C’ FRAME HYDRAULIC PRESSES - SPECIFICATION
August, 2024
-
Indigenous
47.
 IS 15747:2007
Angular deflection for straight sided hydraulic presses - Specification
August, 2024
-
Indigenous
48.
 IS 16728:2022
ISO 23481:2021
Tools for pressing � Cam driver plates (First Revision)
-
Identical under dual numbering
49.
 IS 16793 (Part 1):2019
ISO 11900-1 : 2007
Tools for pressing - Ball - Lock punch retainers: Part 1 types A and B, rectangular and square for light duty
May, 2023
-
Identical under dual numbering
50.
 IS 16793 (Part 2):2019
ISO 11900-2 : 2008
Tools for pressing - Ball - Lock punch retainers: Part 2 types C and D, reduced for light duty
May, 2023
-
Identical under dual numbering
51.
 IS 16793 (Part 3):2018
ISO 11900-3 : 2004
Tools for pressing - Ball - Lock punch retainers: Part 3 type E, reduced for heavy duty
May, 2023
-
Identical under dual numbering
52.
 IS 16794 (Part 2):2019
ISO 10242-2 : 2008
Tools for pressing - Punch holder shanks: Part 2 type C
May, 2023
-
Identical under dual numbering
53.
 IS 16794 (Part 1):2019
ISO 10242-1 : 2011
Tools for pressing - Punch holder shanks: Part 1 type A
May, 2023
-
Identical under dual numbering
54.
 IS 16794 (Part 3):2019
ISO 10242-3:2008
Tools for pressing Punch holder shanks Part 3 Type D
-
Identical under single numbering
55.
 IS 16795:2018
ISO 11415 : 1997
Tools for pressing - Die sets
May, 2023
-
Identical under dual numbering
56.
 IS 16796:2022
ISO 10243:2019
Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding (First Revision)
-
Identical under dual numbering
57.
 IS 16799:2018
ISO 8977 : 2003
Tools for pressing - Matrixes
May, 2023
-
Identical under dual numbering
58.
 IS 16800 (Part 1):2018
ISO 9183-1 : 2008
Tools for pressing - Wear plates for press dies: Part 1 type A
May, 2023
-
Identical under dual numbering
59.
 IS 16800 (Part 2):2018
ISO 9183-2 : 2011
Tools for pressing - Wear plates for press dies: Part 2 type B
-
Identical under dual numbering
60.
 IS 16924:2018
ISO 6751:2011
Tools for Moulding -Ejector Pins with Cylindrical Head
May, 2023
-
Identical under dual numbering
61.
 IS 16925:2018
ISO 8017 : 2007
Tools for Moulding - Guide Pillars, Straight and Shouldered, and Locating Guide Pillars, Shouldered
May, 2023
-
Identical under dual numbering
62.
 IS 16926:2018
ISO 8018 : 2007
Tools for Moulding -Guide Bushes, Headed, and Locating Guide Bushes, Headed
May, 2023
-
Identical under dual numbering
63.
 IS 16927:2023
ISO 8404:2021
Tools for Moulding Angle Pins
-
Identical under dual numbering
64.
 IS 16928:2022
ISO 8405:2020
Tools for moulding � Ejector sleeves with cylindrical head � Basic series for general purposes (First Revision)
-
Identical under dual numbering
65.
 IS 16929:2018
ISO 8406 : 2008
Tools for Moulding - Mould Bases - Round Locating Elements and Spacers
May, 2023
-
Identical under dual numbering
66.
 IS 16930:2018
ISO 8693 : 2011
Tools for Moulding - Flat Ejector Pins
May, 2023
-
Identical under dual numbering
67.
 IS 16931:2018
ISO 8694 : 2011
Tools for Moulding - Shouldered Ejector Pins
May, 2023
-
Identical under dual numbering
68.
 IS 16932:2018
ISO 9449 : 2007
Tools for Moulding - Centring Sleeves
May, 2023
-
Identical under dual numbering
69.
 IS 16933:2018
ISO 10072 : 2004
Tools for Moulding - Sprue Bushes - Dimensions
May, 2023
-
Identical under dual numbering
70.
 IS 16934:2018
ISO 10073 : 2008
Tools for Moulding - Support Pillars
May, 2023
-
Identical under dual numbering
71.
 IS 16935 (Part 1):2018
ISO 10907 -1 : 2008
Tools for Moulding - Locating Rings Part 1 Locating Rings for Mounting without Thermal Insulating Sheets in Small or Medium Moulds (Type A and B)
May, 2023
-
Identical under dual numbering
72.
 IS 16935 (Part 2):2018
ISO 10907-2 : 2007
Tools for Moulding - Locating Rings Part 2 Locating Rings for Mounting with Thermal Insulating Sheets in Small or Medium Moulds (Types C and D)
May, 2023
-
Identical under dual numbering
73.
 IS 17219 (Part 4):2023
ISO 11901-4:2021
Tools for Pressing Gas Springs Part 4 Gas Springs with Increased Spring Force and Same Built Height
-
Identical under dual numbering
74.
 IS 17219 (Part 1):2019
ISO 11901-1 : 2003
Tools for Pressing — Gas Springs Part 1 General Specifications
May, 2023
-
Identical under dual numbering
75.
 IS 17219 (Part 2):2023
ISO 11901-2: 2018
Tools for pressing Gas springs Part 2: Specification of Accessories
-
Identical under dual numbering
76.
 IS 17219 (Part 3):2022
ISO 11901-3:2021
Tools for pressing Gas springs Part 3: Gas spring with increased spring force and compact built height
-
Identical under dual numbering
77.
 IS 17220:2019
ISO 11903 : 2008
Tools for Pressing — Guide Pillar Mountings
May, 2023
-
Identical under dual numbering
78.
 IS 17221:2022
ISO 12165:2019
Tools for moulding — Components of compression and injection moulds and die casting dies — List of equivalent terms and symbols ( First Revision )
-
Identical under dual numbering
79.
 IS 17222:2019
ISO 15600 : 2000
Tools for Moulding — Thermal Insulating Sheets for Injection Moulds
May, 2023
-
Identical under dual numbering
80.
 IS 17223:2019
ISO 16366 : 2008
Tools for Pressing — L-Shaped Guides
May, 2023
-
Identical under dual numbering
81.
 IS 17224:2019
ISO 16367 : 2008
Tools for Pressing — Guide plates — U- and V-blocks
May, 2023
-
Identical under dual numbering
82.
 IS 17225:2019
ISO 16915 : 2003
Tools for Moulding — Sprue Pullers
May, 2023
-
Identical under dual numbering
83.
 IS 17226:2019
ISO 16916 : 2016
Tools for Moulding — Tool Specification Sheet for Injection Moulds
May, 2023
-
Identical under dual numbering
84.
 IS 17227:2019
ISO 18084 : 2011
Press Tools for Tablets — Punches and Dies
May, 2023
-
Identical under dual numbering
85.
 IS 17228:2019
ISO 24233 : 2008
Tools for Moulding — Tool Specification Sheet for Diecasting Dies
May, 2023
-
Identical under dual numbering
86.
 IS 17229:2019
ISO 28238 : 2010
Compression and Injection Moulds — Components for Gating Systems
May, 2023
-
Identical under dual numbering
87.
 IS 17277 (Part 2):2023
ISO 16092-2 : 2019
Machine Tools Safety Presses Part 2 Safety Requirement for Mechanical Presses
-
Identical under dual numbering
88.
 IS 17277 (Part 1):2019
ISO 16092-1 : 2017
Machine Tools Safety — Presses Part 1 General Safety Requirements
May, 2023
-
Identical under dual numbering
89.
 IS 17277 (Part 4):2023
ISO 16092-4 : 2019
Machine Tools Safety Presses Part 4 Safety Requirements for Pneumatic Presses
-
Identical under dual numbering
90.
 IS 17277 (Part 3):2021
ISO 16092-3 : 2017
Machine tools safety -- Presses -- Part 3: Safety requirements for hydraulic presses Adoption of ISO 16092-3:2017 ICS 2508001
September, 2025
-
Identical under dual numbering
91.
 IS 19119:2025
ISO 20928
Tools for pressing Spring plungers with helicoidal compression steel spring or gas spring
-
Identical under dual numbering
92.
 IS 19120 (Part 5):2025
ISO 11901-5 : 2021
Tools for Pressing Gas Springs Part 5: Safety Instructions for Gas Springs
-
Identical under dual numbering
93.
 IS 19121:2025
ISO 21223 : 2019
Tools for Pressing � Vocabulary
-
Identical under dual numbering
94.
 IS 19183 (Part 1):2025
ISO 10069-1 : 2008
Tools for Pressing � Elastomer Pressure Springs Part 1 General Specification
-
Identical under dual numbering
95.
 IS 19183 (Part 2):2025
ISO 10069-2 : 2008
Tools for Pressing � Elastomer Pressure Springs Part 2 Specification of Accessories
-
Identical under dual numbering
96.
 IS 19184 (Part 1):2025
ISO 10071-1 : 2008
Tools for pressing � Ball-lock punches Part 1: Ball-lock punches for light duty
-
Identical under dual numbering
97.
 IS 19184 (Part 2):2025
ISO 10071-2 : 2005
Tools for pressing � Ball-Lock Punches Part 2: Ball-Lock Punches for Heavy Duty
-
Identical under dual numbering
98.
 IS 19185:2025
ISO 23480 : 2013
Tools for pressing � Sliding plates
-
Identical under dual numbering
99.
 IS 19273:2025
ISO 20929:2018
Tools for Pressing � Heel Guiding in Large Stamping and Forming Dies
-
Identical under dual numbering
100.
 IS 2515:1978

Reaffirmed but not taken up for revision
Test chart for guillotine shears (First Revision)
March, 2021
-
Indigenous
101.
 IS 4296 (Part 3):2015
ISO 9181 : 2007
Tools for pressing: Part 3 round punches with 60 degree conical head and reduced shank (Second Revision)
January, 2025
-
Identical under dual numbering
102.
 IS 4296 (Part 2):2024
Tools for Pressing Punches Part 2 Punches with Cylindrical Head and Straight or Reduced Shank (second revision)
1
Indigenous
103.
 IS 4296 (Part 1):2016
ISO 6752 : 2008
Tools for pressing: Part 1 round punches with 60 degrees conical head and straight shank (Second Revision)
September, 2025
-
Identical under dual numbering
104.
 IS 4592:2002
ISO 6899
Acceptance conditions of open mechanical front power presses - Testing of accuracy (First Revision)
May, 2023
-
Identical under dual numbering
105.
 IS 4593:1968

Reaffirmed but not taken up for revision
Test chart for straight - Sided presses
March, 2021
-
Indigenous
106.
 IS 4918:1981
ISO 1684
Specification for hard metal (Carbide) wire, bar and tube drawing dies (First Revision ]
August, 2024
-
Not Equivalent
107.
 IS 6652 (Part 1):1986

Reaffirmed but not taken up for revision
Glossary of terms relating to metal forming machines and tools part 1 metal forming tools (First Revision)
March, 2021
-
Indigenous
108.
 IS 6652 (Part 2):1986

Reaffirmed but not taken up for revision
Glossary of terms relating to metal forming machines and tools: Part 2 metal forming machines relating to sheet metal (First Revision )
March, 2021
-
Indigenous
109.
 IS 6652 (Part 3):1986
Glossary of terms relating to metal for - Ming machines and tools: Part 3 metal forming technology and operations relating to sheet metal ( first revision )
April, 2022
-
Indigenous
110.
 IS 7468:1974
Recommendation on preferred strokes for mechanical and hydraulic presses
September, 2025
1
Indigenous
111.
 IS 7469:1974
Recommendation on preferred capacities for mechanical and hydraulic presses
August, 2024
-
Indigenous
112.
 IS 7664:2005
Guide pillar for press tool die sets - Specification (Second Revision)
September, 2025
-
Indigenous
113.
 IS 7706:1975
Specification for bolster plates for gap frame presses without die cushion
September, 2025
-
Indigenous
114.
 IS 7707:1975
Specification for bolster plates for gap frame presses with die cushion
September, 2025
-
Indigenous
115.
 IS 8064:2002
Method of designation of mechanical and hydraulic presses (Second Revision)
August, 2024
-
Indigenous
116.
 IS 8127:2005
Guide bushes for press tool die sets - Specification (Second Revision)
September, 2025
-
Indigenous
117.
 IS 8711:2002
Gap frame open front mechanical presses - Capacity ratings and dimensions (First Revision)
August, 2024
-
Not Equivalent
118.
 IS 9266 (Part 4):1990
Press working die sets (Boss Type) - Specieication: Part 4 centre post reverse rectangular die sets
April, 2022
-
Indigenous
119.
 IS 9266 (Part 1):2017
Press working die sets (Boss Type) - Specification: Part 1 centre post rectangular die sets (First Revision)
August, 2024
-
Indigenous
120.
 IS 9266 (Part 2):2019
Press working die sets (Boss Type) - Specification: Part 2 centre post square die sets (First Revision)
-
-
Indigenous
121.
 IS 9266 (Part 3):2019
Press working die sets (Boss Type) - Specification: Part 3 centre post round die sets (First Revision)
-
-
Indigenous
122.
 IS 9888:1981
ISO 2804
Dimensions for sintered pellets of hard metal (Carbide) for wire, bar and tube drawing dies
August, 2024
-
Not Equivalent

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
No Records Found

Preliminary Draft Standards

SI. No.
Doc No
TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
No Records Found

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
No Records Found

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
1
PGD 4 (01547)

Revision of: IS 9266:2017
Specification for Press Working Die Sets Boss Type - Part I Centre Post Rectangular Die Sets
2
PGD 4 (01548)

Revision of: IS 9266:2019
Press Working Die Sets Boss Type - Part II Centre Post Square Die Sets
3
PGD 4 (01549)

Revision of: IS 9266:2019
Specification for Press Working Die Sets Boss Type - Part III Centre Post Round Die Sets
4
PGD 4 (01550)

Revision of: IS 10068:2018
Specification for Press Working Die Sets plain type - Part I Centre Post Rectangular Die Sets First Revision
5
PGD 4 (01551)

Revision of: IS 10068:2018
Indian Standard SPECIFICATION FOR PRESS WORKING DIE SETS PLAIN TYPE PART 2 CENTRE POST SQUARE DIE SETS First Revision
6
PGD 4 (01554)

Revision of: IS 15424:2018
Tools for Pressing - Guide Pillars Part 1 Types First Revision
7
PGD 4 (01555)

Revision of: IS 15424:2018
Tools for Pressing - Guide Pillars Part 2 Type A Straight Pillars First Revision
8
PGD 4 (01556)

Revision of: IS 15424:2018
Tools for Pressing - Guide Pillars - Part 3 Type B End-Locking Pillars First Revision
9
PGD 4 (01557)

Revision of: IS 15424:2018
Indian Standard Tools for Pressing - Guide Pillars - Part 4 Type C Pillars with Taper Lead and Bush First Revision
10
PGD 4 (01558)

Revision of: IS 15424:2018
Indian Standard Tools for Pressing - Guide Pillars Part 5 Type D End-Locking Pillars with Flange First Revision
11
PGD 4 (01294)

Revision of: IS 4296:2016
Tools for Pressing - Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank Second Revision
12
PGD 4 (01295)

Revision of: IS 4296:2015
Tools for Pressing - Part 2 Punches with Cylindrical Head and Reduced Shank Second Revision
13
PGD 4 (01296)

Revision of: IS 4296:2002
Tools For Pressing-Part 3 Round Punches With 60o Conical head and reduced shank Second revision of IS 4296 Part 4 2002
14
PGD 4 (01297)

Revision of: IS 11443:2016
Tool for Pressing and Moulding - Machined Plates Part 1 - Machined Plates for Press Tools Second Revision
15
PGD 4 (01298)

Revision of: IS 15300:2016
Tools for Pressing - Punches - Nomenclature and Terminology First Revision
16
PGD 4 (01652)

Revision of: IS 15448:2018
Tools for Pressing - Guide Bushes - Part 1 Forms
17
PGD 4 (01654)

Revision of: IS 15448:2017
Tools for Pressing - Guide Bushes - Part 2 Form A Gliding Bushes Plain Type 1
18
PGD 4 (01659)

Revision of: IS 15448:2018
Tools for Pressing - Guide Bushes - Part 3 Form B Ball Cage Bushes Plain Type 1
19
PGD 4 (01668)

Revision of: IS 15448:2018
Tools for Pressing - Guide Bushes - Part 4 Form C Gliding Bushes Headed Type 1
20
PGD 4 (01669)

Revision of: IS 15448:2018
Tools for Pressing - Guide Bushes - Part 5 Form D Ball Cage Bushes Headed Type 1
21
PGD 4 (01670)

Revision of: IS 15448:2018
Tools for Pressing - Guide Bushes - Part 6 Form E Gliding Bushes Flanged Type 1
22
PGD 4 (01671)

Revision of: IS 15448:2018
Tools for pressing guide bushes Part 7 Form F ball cage bushes flanged type 1 First Revision
23
PGD 4 (01672)

Revision of: IS 15448:2018
Tools for Pressing - Guide Bushes - Part 8 Form G Gliding Bushes Stepped Type 1
24
PGD 4 (01673)

Revision of: IS 15448:2018
Tools for Pressing - Guide Bushes - Part 9 Form B Ball Cage Bushes Plain Type 2
25
PGD 4 (01674)

Revision of: IS 15448:2018
Tools for Pressing - Guide Bushes - Part 10 Form E Gliding Bushes Flanged Type 2
26
PGD 4 (01675)

Revision of: IS 15448:2018
Tools for Pressing - Guide Bushes - Part 11 Form F Ball Cage Bushes Flanged Type 2
27
PGD 4 (10176)
Tools for pressing Matrixes
28
PGD 4 (10177)
Tools for pressing Wear plates for press dies Part 1 Type A
29
PGD 4 (10178)
Tools for pressing Wear plates for press dies Part 2 Type B
30
PGD 4 (10179)
Tools for pressing Punch holder shanks Part 1 Type A
31
PGD 4 (10180)
Tools for pressing Punch holder shanks Part 2 Type C
32
PGD 4 (10181)
Tools for pressing Punch holder shanks Part 3 Type D
33
PGD 4 (10182)
Tools for pressing Compression springs with rectangular section Housing dimensions and colour coding
34
PGD 4 (10183)
Tools for pressing Die sets
35
PGD 4 (10184)
Tools for pressing Ball-lock punch retainers Part 1 Types A and B rectangular and square for light duty
36
PGD 4 (10185)
Tools for pressing Ball-lock punch retainers Part 2 Types C and D reduced for light duty
37
PGD 4 (10186)
Tools for pressing Ball-lock punch retainers Part 3 Type E reduced for heavy duty
38
PGD 4 (11296)
Tools for pressing Sliding plates
39
PGD 4 (11297)
Tools for pressing Cam driver plates
40
PGD 4 (11909)
Tools for moulding Ejector pins with cylindrical head
41
PGD 4 (11910)
Tools for moulding Guide pillars straight and shouldered and locating guide pillars shouldered
42
PGD 4 (11912)
Tools for moulding Guide bushes headed and locating guide bushes headed
43
PGD 4 (11913)
Tools for moulding Angle pins
44
PGD 4 (11914)
Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposes
45
PGD 4 (11915)
Tools for moulding Mould bases Round locating elements and spacers
46
PGD 4 (11916)
Tools for moulding Flat ejector pins
47
PGD 4 (11917)
Tools for moulding Shouldered ejector pins
48
PGD 4 (11918)
Tools for moulding Centring sleeves
49
PGD 4 (11919)
Tools for moulding Sprue bushes Dimensions
50
PGD 4 (11920)
Tools for moulding Support pillars
51
PGD 4 (11921)
Tools for moulding Locating rings Part 1 Locating rings for mounting without thermal insulating sheets in small or medium moulds types A and B
52
PGD 4 (11922)
Tools for moulding Locating rings Part 2 Locating rings for mounting with thermal insulating sheets in small or medium moulds types C and D
53
PGD 4 (12769)
Tools for pressing Gas springs Part 1 General specifications
54
PGD 4 (12770)
Tools for pressing Gas springs Part 2 Specification of accessories
55
PGD 4 (12771)
Tools for pressing Gas springs Part 3 Gas spring with increased spring force and compact built height
56
PGD 4 (12772)
Tools for pressing Gas springs Part 4 Gas springs with increased spring force and same built height
57
PGD 4 (12773)
Tools for pressing Guide pillar mountings
58
PGD 4 (12774)
Tools for moulding Components of compression and injection moulds and diecasting dies Terms and symbols
59
PGD 4 (12775)
Tools for moulding Thermal insulating sheets for injection moulds
60
PGD 4 (12776)
Tools for pressing L-shaped guides
61
PGD 4 (12777)
Tools for pressing Guide plates U- and V-blocks
62
PGD 4 (12778)
Tools for moulding Sprue pullers
63
PGD 4 (12779)
Tools for moulding Tool specification sheet for injection moulds
64
PGD 4 (12780)
Press tools for tablets Punches and dies
65
PGD 4 (12781)
Tools for moulding Tool specification sheet for diecasting dies
66
PGD 4 (12782)
Compression and injection moulds Components for gating systems
67
PGD 4 (17731)

Revision of: IS 15424:2018
Tools for pressing Guide pillars Part 3 Type B end-locking pillars Second Revision
68
PGD 4 (17732)

Revision of: IS 15424:2018
Tools for pressing Guide pillars Part 4 Type C pillars with taper lead and bush Second Revision
69
PGD 4 (17733)

Revision of: IS 15424:2018
Tools for pressing Guide pillars Part 5 Type D end-locking pillars with flange Second Revision
70
PGD 4 (17734)

Revision of: IS 16728:2018
Tools for pressing Cam driver plates First Revision
71
PGD 4 (17735)

Revision of: IS 16796:2018
Tools for pressing Compression springs with rectangular section Housing dimensions and colour coding First Revision
72
PGD 4 (17736)

Revision of: IS 16928:2018
Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposes First Revision
73
PGD 4 (17737)

Revision of: IS 17221:2019
Tools for moulding Components of compression and injection moulds and die casting dies List of equivalent terms and symbols First Revision
74
PGD 4 (18827)

Revision of: IS 16927:2018
Tools for Moulding Angle Pins
75
PGD 4 (18830)

Revision of: IS 17219:2019
Tools for pressing Gas springs Part 3 Gas spring with increased spring force and compact built height
76
PGD 4 (18831)

Revision of: IS 17219:2019
Tools for Pressing Gas Springs Part 4 Gas Springs with Increased Spring Force and Same Built Height
77
PGD 4 (19471)

Revision of: IS 17219:2019
Tools for pressing Gas springs Part 2 Specification of Accessories
78
PGD 4 (19794)
Machine Tools Safety Presses Part 2 Safety Requirement for Mechanical Presses
79
PGD 4 (19796)
Machine Tools Safety Presses Part 4 Safety Requirements for Pneumatic Presses
80
PGD 4 (21304)

Revision of: IS 4296:2015
Tools for Pressing Punches Part 2 Punches with Cylindrical Head and Straight or Reduced Shank
81
PGD 4 (25759)
Tools for pressing Spring plungers with helicoidal compression steel spring or gas spring
82
PGD 4 (25772)
Tools for Pressing Elastomer Pressure Springs Part 1 General Specification
83
PGD 4 (25775)
Tools for Pressing Elastomer Pressure Springs Part 2 Specification of Accessories
84
PGD 4 (25776)
Tools for pressing Ball-lock punches Part 1 Ball-lock punches for light duty
85
PGD 4 (25777)
Tools for pressing Ball-Lock Punches Part 2 Ball-Lock Punches for Heavy Duty
86
PGD 4 (25778)
Tools for Pressing Gas Springs Part 5 Safety Instructions for Gas Springs
87
PGD 4 (25781)
Tools for Pressing Vocabulary
88
PGD 4 (25782)
Tools for pressing Sliding plates
89
PGD 4 (25815)
Tools for Pressing Heel Guiding in Large Stamping and Forming Dies
90
PGD 4 (27045)
Tools for Pressing Punches Part 2 Punches with Cylindrical Head and Straight or Reduced Shank second revision Amendment - 1
91
PGD 4 (28047)

Revision of: IS 4296:2016
Tools for Pressing - Punches Part 1 Round Punches with 60 Degree Conical Head and Straight Shank Third Revision
92
PGD 4 (33250)
Tools for pressing Part 3 round punches with 60 degree conical head and reduced shank Third Revision


Aspect Wise Report

 
 Product:   76
 Code of Practices :    0
 Methods of Test :   0
 Terminology :   9
 Dimensions :   22
 System Standard :   0
 Safety Standard :   4
 Others :    11
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 11443 (Part 12):2003
ISO 6753
Dimensions of Machined Plates for Press Tools Moulds Jigs and Fixtures ISO Title Machined Plates for Press Tools Moulds Jigs and Fixtures - Nominal Dimensions
2.
 IS 12665 (Part 1):1989
Press working tools - Shanks Part 1 General dimensions and survey
3.
 IS 12665 (Part 2):1989
Press Working Tools - Shanks part 2 Shanks to Suit Rivetting
4.
 IS 12665 (Part 3):1989
Press Working Tools - Shanks part 3 Shanks with Screwed Shaft
5.
 IS 12665 (Part 4):1989
Press working tools - shanks Part 4 Shanks with neck and collar
6.
 IS 12665 (Part 5):1996
Press working tools - Shanks Part 5 Shanks with square flanges
7.
 IS 12665 (Part 6):1996
Press Working Tools - Shanks - Part 6 Shanks with Rectangular Flanges
8.
 IS 12665 (Part 7):1996
Press Working Tools - Shanks - Part 7 Shanks with Screwed Shaft and Collar
9.
 IS 4296 (Part 4):2002
ISO 8021
Tools for pressing Part 4 round punches with 60 conical head and reduced shank First Revision
10.
 IS 4296 (Part 3):2002


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 10068 (Part 4):1997
Press working die sets Plain Type Part 4 rear post rectangular die sets - Specification
2.
 IS 10068 (Part 5):1996
Press working die sets Plain Type Part 5 rear post square die sets - Specification
3.
 IS 10068 (Part 2):2018
Press working die sets Plain Type - Specification Part 2 centre post square die sets First Revision
4.
 IS 10068 (Part 6):1996
Press working die sets Plain Type Part 6 rear post round die sets - Specification
5.
 IS 10068 (Part 3):1990
Press working die sets - Plain type - Specification Part 3 centre post round die sets
6.
 IS 10068 (Part 1):2018
Press Working Die Sets Plain Type Specification Part 1 Centre Post Rectangular Die Sets First Revision
7.
 IS 10650:1983

Reaffirmed but not taken up for revision
Specification for pressure pins
8.
 IS 11684:1986

Reaffirmed but not taken up for revision
Test chart for spinning and planishing lathes
9.
 IS 11742:1986

Reaffirmed but not taken up for revision
Test chart for die sets
10.
 IS 14757:2000
RECOMMENDATIONS ON PREFERRED CAPACITIES AND DIMENSIONS FOR STRAIGHT-SIDED COLUMN TYPE AND FOUR PILLAR TYPE HYDRAULIC PRESSES
11.
 IS 14877 (Part 1):2000
Hydraulic presses - Straight sided column C - Frame type Part 1 test chart for geometrical accuracy
12.
 IS 14877 (Part 2):2002
Hydraulic presses - Straight sided column C - Frame type Part 2 test chart for technical Performance evaluation of presses and press brakes
13.
 IS 15424 (Part 5):2022
ISO 9182-5:2020
Tools for pressing Guide pillars Part 5 Type D end-locking pillars with flange Second Revision
14.
 IS 15424 (Part 2):2018
ISO 9182-2 : 2013
Tools for pressing - Guide pillars Part 2 type A straight pillars First Revision
15.
 IS 15424 (Part 3):2021
ISO 9182-3:2020
Tools for pressing Guide pillars Part 3 Type B end-locking pillars Second Revision
16.
 IS 15424 (Part 4):2022
ISO 9182-4:2020
Tools for pressing Guide pillars Part 4 Type C pillars with taper lead and bush Second Revision
17.
 IS 15448 (Part 4):2018
ISO 9448-4
Tools for pressing - Guide bushes Part 4 form C gliding bushes headed type 1 First Revision
18.
 IS 15448 (Part 9):2018
ISO 9448-9 : 2013
Tools for pressing - Guide bushes Part 9 form B ball cage bushes plain type 2 First Revision
19.
 IS 15448 (Part 10):2018
ISO 9448-10 : 2013
Tools for pressing - Guide bushes Part 10 form E gliding bushes flanged type 2 First Revision
20.
 IS 15448 (Part 5):2018
ISO 9448-5 : 2013
Tools for pressing - Guide bushes Part 5 form D ball cage bushes headed type 1 First Revision
21.
 IS 15448 (Part 11):2018
ISO 9448-11 : 2013
Tools for pressing - Guide bushes Part 11 form F ball cage bushes flanged type 2 First Revision
22.
 IS 15448 (Part 2):2017
ISO 9448-2 : 2013
Tools for pressing - Guide bushes Part 2 form A gliding bushes plain type 1 First Revision
23.
 IS 15448 (Part 6):2018
ISO 9448-6 : 2013
Tools for pressing - Guide bushes Part 6 form E gliding bushes flanged type 1 First Revision
24.
 IS 15448 (Part 7):2018
ISO 9448-7 : 2013
Tools for pressing - Guide bushes Part 7 form F ball cage bushes flanged type 1 First Revision
25.
 IS 15448 (Part 3):2018
ISO 9448-3 : 2013
Tools for pressing - Guide bushes Part 3 form B ball cage bushes plain type 1 First Revision
26.
 IS 15448 (Part 8):2018
ISO 9448-8 : 2013
Tools for pressing - Guide bushes Part 8 form G gliding bushes stepped type 1 First Revision
27.
 IS 15448 (Part 1):2018
ISO 9448-1 : 2013
Tools for pressing - Guide bushes Part 1 forms First Revision
28.
 IS 15744:2007
Angular Deflection for C Frame Mechanical Presses Specification
29.
 IS 15745:2007
Deflection for straight sided mechanical presses - Specification
30.
 IS 15746:2007
ANGULAR DEFLECTION FOR C FRAME HYDRAULIC PRESSES - SPECIFICATION
31.
 IS 15747:2007
Angular deflection for straight sided hydraulic presses - Specification
32.
 IS 16793 (Part 2):2019
ISO 11900-2 : 2008
Tools for pressing - Ball - Lock punch retainers Part 2 types C and D reduced for light duty
33.
 IS 16793 (Part 3):2018
ISO 11900-3 : 2004
Tools for pressing - Ball - Lock punch retainers Part 3 type E reduced for heavy duty
34.
 IS 16793 (Part 1):2019
ISO 11900-1 : 2007
Tools for pressing - Ball - Lock punch retainers Part 1 types A and B rectangular and square for light duty
35.
 IS 16794 (Part 3):2019
ISO 10242-3:2008
Tools for pressing Punch holder shanks Part 3 Type D
36.
 IS 16794 (Part 2):2019
ISO 10242-2 : 2008
Tools for pressing - Punch holder shanks Part 2 type C
37.
 IS 16794 (Part 1):2019
ISO 10242-1 : 2011
Tools for pressing - Punch holder shanks Part 1 type A
38.
 IS 16795:2018
ISO 11415 : 1997
Tools for pressing - Die sets
39.
 IS 16799:2018
ISO 8977 : 2003
Tools for pressing - Matrixes
40.
 IS 16800 (Part 1):2018
ISO 9183-1 : 2008
Tools for pressing - Wear plates for press dies Part 1 type A
41.
 IS 16800 (Part 2):2018
ISO 9183-2 : 2011
Tools for pressing - Wear plates for press dies Part 2 type B
42.
 IS 16924:2018
ISO 6751:2011
Tools for Moulding -Ejector Pins with Cylindrical Head
43.
 IS 16927:2023
ISO 8404:2021
Tools for Moulding Angle Pins
44.
 IS 16928:2022
ISO 8405:2020
Tools for moulding Ejector sleeves with cylindrical head Basic series for general purposes First Revision
45.
 IS 16929:2018
ISO 8406 : 2008
Tools for Moulding - Mould Bases - Round Locating Elements and Spacers
46.
 IS 16930:2018
ISO 8693 : 2011
Tools for Moulding - Flat Ejector Pins
47.
 IS 16931:2018
ISO 8694 : 2011
Tools for Moulding - Shouldered Ejector Pins
48.
 IS 16935 (Part 1):2018
ISO 10907 -1 : 2008
Tools for Moulding - Locating Rings Part 1 Locating Rings for Mounting without Thermal Insulating Sheets in Small or Medium Moulds Type A and B
49.
 IS 16935 (Part 2):2018
ISO 10907-2 : 2007
Tools for Moulding - Locating Rings Part 2 Locating Rings for Mounting with Thermal Insulating Sheets in Small or Medium Moulds Types C and D
50.
 IS 17219 (Part 2):2023
ISO 11901-2: 2018
Tools for pressing Gas springs Part 2 Specification of Accessories
51.
 IS 17219 (Part 4):2023
ISO 11901-4:2021
Tools for Pressing Gas Springs Part 4 Gas Springs with Increased Spring Force and Same Built Height
52.
 IS 17220:2019
ISO 11903 : 2008
Tools for Pressing Guide Pillar Mountings
53.
 IS 17222:2019
ISO 15600 : 2000
Tools for Moulding Thermal Insulating Sheets for Injection Moulds
54.
 IS 17225:2019
ISO 16915 : 2003
Tools for Moulding Sprue Pullers
55.
 IS 19119:2025
ISO 20928
Tools for pressing Spring plungers with helicoidal compression steel spring or gas spring
56.
 IS 19120 (Part 5):2025
ISO 11901-5 : 2021
Tools for Pressing Gas Springs Part 5 Safety Instructions for Gas Springs
57.
 IS 19121:2025
ISO 21223 : 2019
Tools for Pressing Vocabulary
58.
 IS 19183 (Part 1):2025
ISO 10069-1 : 2008
Tools for Pressing Elastomer Pressure Springs Part 1 General Specification
59.
 IS 19183 (Part 2):2025
ISO 10069-2 : 2008
Tools for Pressing Elastomer Pressure Springs Part 2 Specification of Accessories
60.
 IS 19184 (Part 2):2025
ISO 10071-2 : 2005
Tools for pressing Ball-Lock Punches Part 2 Ball-Lock Punches for Heavy Duty
61.
 IS 19184 (Part 1):2025
ISO 10071-1 : 2008
Tools for pressing Ball-lock punches Part 1 Ball-lock punches for light duty
62.
 IS 19185:2025
ISO 23480 : 2013
Tools for pressing Sliding plates
63.
 IS 2515:1978

Reaffirmed but not taken up for revision
Test chart for guillotine shears First Revision
64.
 IS 4296 (Part 2):2024
Tools for Pressing Punches Part 2 Punches with Cylindrical Head and Straight or Reduced Shank second revision
65.
 IS 4592:2002
ISO 6899
Acceptance conditions of open mechanical front power presses - Testing of accuracy First Revision
66.
 IS 4593:1968

Reaffirmed but not taken up for revision
Test chart for straight - Sided presses
67.
 IS 4918:1981
ISO 1684
Specification for hard metal Carbide wire bar and tube drawing dies First Revision
68.
 IS 7664:2005
Guide pillar for press tool die sets - Specification Second Revision
69.
 IS 7706:1975
Specification for bolster plates for gap frame presses without die cushion
70.
 IS 7707:1975
Specification for bolster plates for gap frame presses with die cushion
71.
 IS 8127:2005
Guide bushes for press tool die sets - Specification Second Revision
72.
 IS 9266 (Part 3):2019
Press working die sets Boss Type - Specification Part 3 centre post round die sets First Revision
73.
 IS 9266 (Part 4):1990
Press working die sets Boss Type - Specieication Part 4 centre post reverse rectangular die sets
74.
 IS 9266 (Part 1):2017
Press working die sets Boss Type - Specification Part 1 centre post rectangular die sets First Revision
75.
 IS 9266 (Part 2):2019
Press working die sets Boss Type - Specification Part 2 centre post square die sets First Revision
76.
 IS 9888:1981
ISO 2804
Dimensions for sintered pellets of hard metal Carbide for wire bar and tube drawing dies