BUREAU OF INDIAN STANDARDS
Programme of Work
ETD18 : Industrial Process Measurement And Control
- Scope : To prepare standards for systems and elements used for industrial process measurement and control concerning continuous and batch processes To coordinate the standardization of those features of related elements which affect suitability for integration into such systems operating with electrical, pneumatic, hydraulics mechanical or other systems of measurements and/or control
-
Liaison :IEC TC 27 - Industrial electroheating and electromagnetic processing - Participating (P)
IEC TC 65 - Industrial-process measurement, control and automation - Participating (P)
IEC TC 65 / SC 65A - System aspects - Participating (P)
IEC TC 65 / SC 65B - Measurement and control devices - Participating (P)
|
IS 10098:1982 |
General requirements for electric infra - Red emitters for heating purposes
|
March, 2016
|
-
|
Modified/Technically Equivalent
|
|
|
IS 10122:1982 |
Methods of tests for crucible induction furnaces
|
March, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 10189 (Part 4):2016 IEC 60534-4 : 2006 |
Industrial - Process control valves Part 4 inspection and routine testing
|
October, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 10189 (Part 2/Sec 1):2024 IEC 60534-2-1: 2011 |
Industrial-Process Control Valves Part 2 Flow Capacity Section 1 Sizing Equations for Fluid Flow Under Installed Conditions (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 10189 (Part 1):2017 IEC 60534-1 : 2005 |
Industrial - Process control valves: Part 1 control valve terminology and general considerations (First Revision)
|
October, 2021
|
-
|
Identical under dual numbering
|
|
|
IS 10189 (Part 2/Sec 2):1993 |
Industrial process control valves Part 2 flow capacity Section 2 sizing equations for compressible fluid flow under lnstalled conditions
|
-
|
Modified/Technically Equivalent
|
||
|
IS 10215:2024 IEC IEC 60683: 2011 |
Submerged-Arc Furnaces - Methods of Test (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 10639:1983 |
Specification for disappearing filament type, optical pyrometer
|
October, 2021
|
-
|
Modified/Technically Equivalent
|
|
|
IS 11222:1985 Reaffirmed but not taken up for revision |
Specification for dial, scales and indexes for indicating analogue measuring instruments
|
September, 2015
|
-
|
Indigenous
|
|
|
IS 11692:2025 IEC 60779: 2020 |
Installations for Electroheating and Electromagnetic Processing - Test Methods for Electroslag Remelting Furnaces (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 12188:1987 |
Specification for electric direct arc melting furnaces
|
February, 2018
|
-
|
Indigenous
|
|
|
IS 12306:2024 IEC 60676: 2011 |
Direct Arc Furnaces - Methods of Test (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 12434:1988 |
Specification for coating/plating thickness tester, destructive type
|
-
|
Indigenous
|
||
|
IS 12554 (Part 1):1988 |
Specification for non - destructive coating thickness testing instruments Part 1 eddy current instruments
|
-
|
Indigenous
|
||
|
IS 12554 (Part 2):1999 |
Specification for non - destructive coating thickness testing instruments - Part 2 magnetic instruments
|
-
|
Indigenous
|
||
|
IS 12555:1988 |
Guide for signal conditioning devices for process control systems
|
-
|
Indigenous
|
||
|
IS 12556:1988 |
Specification for binary direct voltage signals for process measurement and control systems
|
October, 2024
|
-
|
Indigenous
|
|
|
IS 12579:1988 |
Specification for base metal mineral insulated thermocouple cables and thermocouples
|
-
|
Indigenous
|
||
|
IS 13122 (Part 1):1993 Reaffirmed but not taken up for revision |
Transmitters for use in industrial process control systems - Specification: Part 1 methods for evaluating the performance
|
May, 2021
|
-
|
Indigenous
|
|
|
IS 13122 (Part 2):1991 Reaffirmed but not taken up for revision |
Transmitters for use in industrial process control systems - Specification: Part 2 guidance for installation, inspection and routine testing
|
May, 2016
|
-
|
Indigenous
|
|
|
IS 13211:1991 Reaffirmed but not taken up for revision |
Vapour pressure dial - Type thermometer - Specification
|
May, 2016
|
-
|
Indigenous
|
|
|
IS 13263:2024 IEC/TS 60680: 2008 |
Plasma Equipment for Electroheat Applications — Methods of Test (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 13673 (Part 1):2021 IEC 60746-1 : 2003 |
Expression of Performance of Electrochemical Analyzers : Part 1 General
|
-
|
Identical under dual numbering
|
||
|
IS 13673 (Part 2):2021 IEC 60746-2 : 2003 |
Expression of Performance of Electrochemical Analyzers Part 2 pH Value ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 13673 (Part 3):2021 IEC 60746-3 : 2002 |
Expression of Performance of Electrochemical Analyzers Part 3 Electrolytic Conductivity ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 13673 (Part 4):2024 IEC 60746-4: 2018 |
Expression of Performance of Electrochemical Analyzers Part 4 Standard for Measuring Oxygen Dissolved in Water (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 13673 (Part 5):1999 Reaffirmed but not taken up for revision |
Expression of performance of electrochemical analyzers: Part 5 oxidation - Reduction potential or redox potential
|
-
|
Modified/Technically Equivalent
|
||
|
IS 14254 (Part 2):2021 |
Industrial-Process Measurement and Control - Programmable Controllers Part 2 Equipment Requirements and Tests ( Second Revision )
|
-
|
Identical under dual numbering
|
||
|
IS 14254 (Part 1):2006 IEC 61131-1 |
Programmable controllers: Part 1 - General information (First Revision)
|
August, 2024
|
-
|
Identical under dual numbering
|
|
|
IS 16923 (Part 3):2023 IEC 60584-3: 2021 |
THERMOCOUPLES - PART 3: EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM
|
-
|
Identical under dual numbering
|
||
|
IS 16923 (Part 1):2018 IEC 60584-1 : 2013 |
Thermocouples Part 1 EMF Specifications and Tolerances ( First Revision )
|
May, 2023
|
-
|
Identical under dual numbering
|
|
|
IS 17724 (Part 2/Sec 202):2024 IEC 61010-2-202:2020 |
Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use Part 2 Particular Requirements Section 202 Electrically Operated Valve Actuators
|
-
|
Identical under dual numbering
|
||
|
IS 19283:2025 IEC 60239:2005 |
Graphite Electrodes for Electric Arc Furnaces - Dimensions and Designation
|
-
|
Identical under dual numbering
|
||
|
IS 19284 (Part 1):2025 IEC 60240-1:1992 |
Characteristics of Electric Infra-Red Emitters for Industrial Heating Part 1 Short Wave Infra-Red Emitters
|
-
|
Identical under dual numbering
|
||
|
IS 2053:1974 Reaffirmed but not taken up for revision |
Specification for thermocouple pyrometers (First Revision)
|
-
|
Indigenous
|
||
|
IS 2711:1979 |
Specification for direct reading pH meters (Second Revision)
|
December, 2025
|
1
|
Indigenous
|
|
|
IS 2806:1992 Reaffirmed but not taken up for revision |
Thermometry electrical resistance guide (First Revision)
|
April, 2018
|
-
|
Indigenous
|
|
|
IS 2848:2023 IEC 60751: 2022 |
INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS
|
-
|
Identical under dual numbering
|
||
|
IS 3624:1987 |
Specification for pressure and vacuum gauges (Second Revision)
|
April, 2018
|
-
|
Indigenous
|
|
|
IS 4309:1979 |
Methods of measurement on direct reading PH meters (First Revision)
|
December, 2025
|
-
|
Indigenous
|
|
|
IS/IEC 60519-6:2022 IEC 60519-6:2022 |
SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 6: PARTICULAR REQUIREMENTS FOR HIGH FREQUENCY DIELECTRIC AND MICROWAVE HEATING AND PROCESSING EQUIPMENT
|
-
|
Identical under single numbering
|
||
|
IS/IEC 60519-1:2020 IEC 60519-1: 2020 |
SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1: GENERAL REQUIREMENTS
|
-
|
Identical under single numbering
|
||
|
IS/IEC 60519-3:2005 IEC 60519-3: 2005 |
SAFETY IN ELECTROHEAT INSTALLATIONS - PART 3: PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS
|
-
|
Identical under single numbering
|
||
|
IS/IEC 60519-8:2020 IEC 60519-8:2020 |
Safety in installations for electroheating and electromagnetic processing - Part 8: Particular requirements for electroslag remelting furnaces
|
-
|
Identical under single numbering
|
||
|
IS/IEC 60519-4:2021 IEC 60519-4: 2021 |
Safety in Installations for Electroheating and Electromagnetic Processing Part 4 Particular Requirements for ARC Furnace Installations
|
-
|
Identical under single numbering
|
||
|
IS/IEC 60534-2-1):2011 NULL |
Industrial-Process Control Valves Part 2-1 Flow Capacity — Sizing Equations for Fluid Flow under Installed Conditions ( First Revision )
|
-
|
Identical under dual numbering
|
||
|
IS/IEC 60534-2-3):2015 NULL |
Industrial-Process Control Valves Part 2-3 Flow Capacity — Test Procedures ( First Revision )
|
January, 2021
|
-
|
Identical under dual numbering
|
|
|
IS/IEC 61308:2005 IEC 61308: 2005 |
HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS - TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT
|
-
|
Identical under single numbering
|
||
|
IS/IEC 61508-1:2010 IEC 61508-1 : 2010 |
Functional Safety of Electrical / Electronic / Programmable Electronic Safety-Related Systems Part 1 General Requirements ( First Revision )
|
October, 2024
|
-
|
Identical under dual numbering
|
|
|
IS/IEC 61508:2005 |
Functional safety of electrical electronic/programmable electronic safety - Related systems: Part 0 functional safety and IEC 61508
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61508-2:2010 IEC 61508-2 : 2010 |
Functional safety of electrical/ electronic/programmable electronic safety - Related systems: Part 2 requirements for electrical/electronic/ programmable electronic safety related systems (First Revision)
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61508-3:2010 IEC 61508-3 : 2010 |
Functional safety of electrical/electronic/programmable electronic safety-related systems : Part 3 Software requirements
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61508-4:2010 IEC 61508-4 : 2010 |
Functional safety of electrical/electronic/programmable electronic safety-related systems : Part 4 Definitions and abbreviations
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61508-5:2010 IEC 61508-5 : 2010 |
Functional safety of electrical/electronic/programmable electronic safety - related systems : Part 5 Examples of methods for the determination of safety integrity levels
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61508-6:2010 IEC 61508-6 : 2010 |
Functional safety of electrical/electronic/programmable electronic safety-related systems : Part 6 Guidelines on the applications
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61508-7:2010 IEC 61508-7 : 2010 |
Functional safety of electgrical/electronic/programmable electgronic safety-related systems : Part 7 Overview of techniques and measures
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61511-1:2017 IEC 61511-1 : 2016 + AMD1 : 2017 |
Functional safety - Safety instrumented systems for the process industry sector : Part 1 Frameworks, definitions, system, hardware and software requirements
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61511-2:2016 IEC 61511-2 : 2016 |
Functional safety - Safety instrumented systems for the process industry sector : Part 2 Guidelines for the application
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 61511-3:2016 IEC 61511-3 : 2016 |
Functional safety - Safety instrumented systems for the process industry sector: Part 3 guidance for the determination of the required safety integrity levels (First Revision)
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 62264-2:2004 |
Enterprise - Control system integration: Part 2 object model attributes
|
October, 2024
|
-
|
Identical under single numbering
|
|
|
IS/IEC 62264-1:2003 |
Enterprise - Control system integration: Part 1 models and terminology
|
January, 2021
|
-
|
Identical under single numbering
|
|
|
IS/IEC 62443-1-1):2009 IEC/TS 62443-1-1 : 2009 |
Industrial Communication Networks Part 1 Network and System Security Section 1 Terminology, concepts and models
|
-
|
Identical under single numbering
|
||
|
IS/IEC 62443-2-4):2017 IEC 62443-2-4 : 2017 |
Security for Industrial Automation and Control Systems Part 2: Section 4: Security Program Requirements for IACS Service Providers
|
-
|
Identical under single numbering
|
||
|
IS/IEC 62443-3-3):2013 IEC 62443-3-3 : 2013 |
Industrial Communication Networks Part 3 Network and System Security Section 3 System security requirements and security levels
|
-
|
Identical under single numbering
|
||
|
IS/IEC 62443-4-1):2018 IEC 62443-4-1 : 2018 |
Security for Industrial Automation and Control Systems Part 4 Section 1 Secure Product Development Lifecycle Requirements
|
-
|
Identical under single numbering
|
||
|
IS/IEC 62443-4-2):2019 IEC 62443-4-2 : 2019 |
Security for Industrial Automation and Control Systems Part 4 Sec 2 Technical Security Requirements for IACS Components
|
-
|
Identical under single numbering
|
||
|
IS 6804:1972 |
Specification for glass electrodes for direct reading pH meter
|
December, 2025
|
-
|
Indigenous
|
|
|
IS 7358:1984 Reaffirmed but not taken up for revision |
Specification for thermocouples (First Revision)
|
September, 2015
|
-
|
Indigenous
|
|
|
IS 7722:2024 IEC 60382: 1991 |
Analogue Pneumatic Signals for Process Control Systems (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 7728:1984 |
Specification for analogue dc current signals for process control systems (First Revision)
|
September, 2015
|
-
|
Indigenous
|
|
|
IS 8018:1976 Reaffirmed but not taken up for revision |
Specification for platinum and platinum alloy wires for thermocouple elements
|
-
|
Indigenous
|
||
|
IS 8493:2024 IEC 60381-2:1978 |
Analogue DC voltage signals for Industrial Process Measurement and Control Systems (First Revision)
|
-
|
Identical under dual numbering
|
||
|
IS 8495 (Part 1):1977 Reaffirmed but not taken up for revision |
Specification for ceramic components for thermocouples and resistance thermometers: Part 1 terminal blocks
|
-
|
Indigenous
|
||
|
IS 8784:1987 Reaffirmed but not taken up for revision |
Specification for thermocouple compensating cables (Second Revision)
|
April, 2018
|
-
|
Indigenous
|
|
|
IS 8824 (Part 2):1988 |
Specification for electrical moisture meters
|
September, 2015
|
-
|
Indigenous
|
|
|
IS 8992:1978 IEC 60396 |
Test methods for induction furnaces with submerged channels
|
March, 2016
|
-
|
Modified/Technically Equivalent
|
|
|
IS 9021:1978 IEC 60398 |
General test conditions for industrial electro - Heating equipment
|
March, 2016
|
-
|
Modified/Technically Equivalent
|
|
|
IS 9029:1978 IEC 60397 Reaffirmed but not taken up for revision |
Methods of tests for batch furnaces with metallic heating resistors
|
March, 2016
|
1
|
Modified/Technically Equivalent
|
|
|
IS 9050:1979 IEC 60239 |
Nominal dimensions of cylindrical machined graphite electrodes with threaded sockets and connecting pins for use in electric arc furnaces
|
March, 2016
|
-
|
Modified/Technically Equivalent
|
|
|
IS 9080 (Part 2/Sec 1):1979 Reaffirmed but not taken up for revision |
Safety requirements in electro - Heat installations: Part 2 particular requirements for resistance heating equipment: Sec 1 protection - In direct resistance heating installations
|
March, 2016
|
-
|
Modified/Technically Equivalent
|
|
|
IS 9080 (Part 2/Sec 2):1980 Reaffirmed but not taken up for revision |
Safety requirements in electro - Heat installations: Part 2 particular requirements for resistance heating equipment: Sec 2 protection in indirect resistance heating installations
|
March, 2016
|
-
|
Indigenous
|
|
|
IS 9080 (Part 2/Sec 3):1981 IEC 60519-2 Reaffirmed but not taken up for revision |
Safety requirements in electro - Heat installations: Part 2 particular requirements for resistance heating equipment: Sec 3 protection in potassium and sodium nitrate nitrite bath furnaces
|
March, 2016
|
-
|
Indigenous
|
|
|
IS 9080 (Part 2/Sec 4):1981 Reaffirmed but not taken up for revision |
Safety requirements in electro - Heat installations: Part 2 particular requirements for resistance heating equipment: Sec 4 protection in installations used for drying varnishes and other similar products
|
March, 2016
|
-
|
Indigenous
|
|
|
IS 9080 (Part 4):1981 |
Safety requirements in electro - Heat installations: Part 4 particular requirements for arc furnace installations
|
March, 2016
|
-
|
Indigenous
|
| No Records Found |
| No Records Found |
| No Records Found |
| No Records Found | ||
| No Records Found | ||
|
ETD 18 (06735)
|
Industrial Process Control Valves Part 1 Control Valves Terminology and General Considerations | |
|
ETD 18 (06736)
|
Industrial Process Control Valves Part 4 Inspection and Routine Testing | |
|
ETD 18 (11489)
Revision of: IS 7988:1976 |
Thermocouples Part 1 EMF specifications and tolerances first revision | |
|
ETD 18 (12460)
Revision of: IS/IEC 60534:2011 |
Industrial-process control valves Part 2-1 Flow capacity Sizing equations for fluid flow under installed conditions second revision | |
|
ETD 18 (12461)
Revision of: IS/IEC 60534:2015 |
Industrial-process control valves Part 2-3 Flow capacity - Test Procedures first revision | |
|
ETD 18 (12465)
Revision of: IS/IEC 61508:2010 |
Functional safety of electricalelectronicprogrammable electronic safety-related systems -Part 1 General requirements first revision | |
|
ETD 18 (12466)
Revision of: IS/IEC 61508:2010 |
Functional safety of electricalelectronicprogrammable electronic safety-related systems Part 2 Requirements for electricalelectronicprogrammable electronic safety related systems first revision | |
|
ETD 18 (12468)
Revision of: IS/IEC 61508:2010 |
Functional safety of electricalelectronicprogrammable electronic safety-related systems Part 3 Software Requirements first revision | |
|
ETD 18 (12469)
Revision of: IS/IEC 61508:2010 |
Functional safety of electricalelectronicprogrammable electronic safety-related systems Part 4 Definitions and abbreviations first revision | |
|
ETD 18 (12470)
Revision of: IS/IEC 61508:2010 |
Functional safety of electricalelectronicprogrammable electronic safety-related systems Part 5 Examples of methods for the determination of safety integrity levels first revision | |
|
ETD 18 (12471)
Revision of: IS/IEC 61508:2010 |
Functional safety of electricalelectronicprogrammable electronic safety-related systems Part 6 Guidelines on the application of IEC 61508-2 and IEC 61508-3 first revision | |
|
ETD 18 (12472)
Revision of: IS/IEC 61508:2010 |
Functional safety of electricalelectronicprogrammable electronic safety-related systems Part 7 Overview of techniques and measures first revision | |
|
ETD 18 (12473)
Revision of: IS/IEC 61511:2017 |
Functional safety Safety instrumented systems for the process industry sector Part 1 Framework definitions system hardware and application programming requirements first revision | |
|
ETD 18 (12474)
Revision of: IS/IEC 61511:2016 |
Functional safety Safety instrumented systems for the process industry sector Part 2 Guidelines for the application of IEC 61511-1 2016 first revision | |
|
ETD 18 (12475)
Revision of: IS/IEC 61511:2016 |
Functional safety Safety instrumented systems for the process industry sector Part 3 Guidance for the determination of the required safety integrity levels | |
|
ETD 18 (12476)
Revision of: IS 13673:1993 |
Expression of Performance of Electrochemical Analyzers Part 1 General | |
|
ETD 18 (12477)
Revision of: IS 13673:1993 |
Expression of Performance of Electrochemical Analyzers Part 2 pH value | |
|
ETD 18 (12478)
Revision of: IS 13673:1993 |
Expression of Performance of Electrochemical Analyzers Part 3 Electrolytic conductivity | |
|
ETD 18 (13645)
Revision of: IS 14254:2006 |
Industrial-process measurement and control Programmable controllers Part 2 Equipment requirements and tests second revision | |
|
ETD 18 (14664)
|
Industrial communication networks Part 1 Network and system security Sec 1 Terminology concepts and models | |
|
ETD 18 (14668)
|
Security for industrial automation and control systems - Part 2 Sec 1 Establishing an industrial automation and control system security program | |
|
ETD 18 (14669)
|
Security for industrial automation and control systems Part 2 Sec 4 Security program requirements for IACS service providers | |
|
ETD 18 (14670)
|
Industrial communication networks Part 3 Network and system security Sec 3 System security requirements and security levels | |
|
ETD 18 (14677)
|
Security for industrial automation and control systems Part 4-1 Secure product development lifecycle requirements | |
|
ETD 18 (14678)
|
Security for industrial automation and control systems Part 4-2 Technical security requirements for IACS components | |
|
ETD 18 (21367)
|
SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 1 GENERAL REQUIREMENTS | |
|
ETD 18 (21372)
|
SAFETY IN ELECTROHEAT INSTALLATIONS - PART 3 PARTICULAR REQUIREMENTS FOR INDUCTION AND CONDUCTION HEATING AND INDUCTION MELTING INSTALLATIONS | |
|
ETD 18 (21374)
|
HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS - TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT | |
|
ETD 18 (21375)
|
SAFETY IN INSTALLATIONS FOR ELECTROHEATING AND ELECTROMAGNETIC PROCESSING - PART 6 PARTICULAR REQUIREMENTS FOR HIGH FREQUENCY DIELECTRIC AND MICROWAVE HEATING AND PROCESSING EQUIPMENT | |
|
ETD 18 (21376)
Revision of: IS 2848:1986 |
INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS | |
|
ETD 18 (21377)
|
THERMOCOUPLES - PART 3 EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM | |
|
ETD 18 (22557)
|
Safety Requirements for Electrical Equipment for Measurement Control and Laboratory Use Part 2 Particular Requirements Section 202 Electrically Operated Valve Actuators | |
|
ETD 18 (22816)
Revision of: IS 13673:1998 |
Expression of performance of electrochemical analyzers Part 4 standard for measuring oxygen dissolved in water First Revision | |
|
ETD 18 (22817)
Revision of: IS 8493:1977 |
Analogue DC voltage signals for Industrial Process Measurement and Control Systems First Revision | |
|
ETD 18 (22818)
Revision of: IS 7722:1975 |
Analogue pneumatic signals for process control systems First Revision | |
|
ETD 18 (22819)
Revision of: IS 10189:1993 |
Industrial-process control valves - Part 2-1 Flow capacity - Sizing equations for fluid flow under installed conditions | |
|
ETD 18 (22820)
Revision of: IS 11692:1986 |
Installations for Electroheating and Electromagnetic Processing Test Methods for Electroslag Remelting Furnaces First Revision | |
|
ETD 18 (22821)
Revision of: IS 12306:1987 |
Methods of test for direct arc furnaces First Revision | |
|
ETD 18 (22822)
Revision of: IS 10215:1982 |
Methods of tests for submerged - Arc furnaces First Revision | |
|
ETD 18 (22823)
|
Safety in installations for electroheating and electromagnetic processing - Part 8 Particular requirements for electroslag remelting furnaces | |
|
ETD 18 (22824)
Revision of: IS 13263:1992 |
Plasma Equipment for Electroheat Applications Test Methods First Revision | |
|
ETD 18 (24118)
|
Safety in Installations for Electroheating and Electromagnetic Processing Part 4 Particular Requirements for ARC Furnace Installations | |
|
ETD 18 (24119)
|
Characteristics of Electric Infra-Red Emitters for Industrial Heating Part 1 Short Wave Infra-Red Emitters | |
|
ETD 18 (24120)
Revision of: IS 12556:1988 |
Binary Direct Voltage Signals for Process Measurement and Control Systems-Specification First Revision | |
|
ETD 18 (24122)
|
Graphite Electrodes for Electric Arc Furnaces - Dimensions and Designation | |
|
ETD 18 (27392)
Revision of: IS 12579:1988 |
Specification for Base Metal Mineral Insulated Thermocouple Cables and Thermocouples First Revision |
|
|
IS 10144:1982 |
Specification for electronic speed limiters for diesel vehicles |
|
|
IS 10625:1983 Reviewed In : 2015 |
Reference tables for nickel chromium-copper nickel chromel-constantan thermocouples |
|
|
IS/IEC 1131-2:1992 |
Programmable controllers Part 2 equipment requirements and tests |
|
|
IS 11712:1986 IEC 27(CO) |
Safety requirements for electro - Slag remelting furnaces |
|
|
IS 12051:1987 Reviewed In : 2013 |
Reference Tables for Nickel-chromium-silicon nicrosil nisil Type N Thermocouples |
|
|
IS/IEC 1308:1994 IEC 61308 : 1994 |
High frequency dielectric heating installations - Test methods for the determination of power output |
|
|
IS 2054:1962 Reviewed In : 2015 |
Referance tables for nickel chromium-nickel aluminium thermocouples |
|
|
IS 2055:1962 Reviewed In : 2015 |
Reference tables for platinum rhodium-platinum thermocouples |
|
|
IS 2056:1962 Reviewed In : 2015 |
Reference tables for copper-constantan thermocouples |
|
|
IS 2057:1962 Reviewed In : 2015 |
Reference Tables for Iron-constantan Thermocouples |
|
|
IS/IEC 519-1:1984 |
Safety in electroheat installation Part 1 general requirements |
|
|
IS/IEC 519-3:1988 |
Safety in electroheat installations Part 3 particular requirements for induction and conduction heating and induction melting installations |
|
|
IS/IEC 519-5:1980 |
Safety in electroheat installation Part 5 specification for safety in plasma installation |
|
|
IS/IEC 519-9:1987 |
Safety in electroheat installations Part 9 particular requirements for high - Frequency dielectric heating installations |
|
|
IS 5883:1970 |
Specification for nickel resistance thermometer elements |
|
|
IS 6720:1972 |
Reference tables for platinum 30 percent rhodium - Platinum 6 percent rhodium thermocouples |
|
|
IS 7988:1976 Reviewed In : 2013 |
Referance tables for chromel-kopel thermocouples |
|
|
IS 8935:1985 |
Specification for electric solenoid operated actuators First Revision |
|
|
IS 9319:1979 |
Specification for electronic self - Balancing potentiometric indicators and recorders |
|
|
IS 9334:1986 |
Specification for electric motor operated actuators First Revision |
|
|
IS 9347:1979 |
Specification for charts for recording instruments |
|
|
IS 9463:1980 |
Specification for electronic self - Balancing bridge indicators and recorders |
|
IS 10098:1982 |
General requirements for electric infra - Red emitters for heating purposes |
|
|
IS 10189 (Part 2/Sec 2):1993 |
Industrial process control valves Part 2 flow capacity Section 2 sizing equations for compressible fluid flow under lnstalled conditions |
|
|
IS 10639:1983 |
Specification for disappearing filament type optical pyrometer |
|
|
IS 12188:1987 |
Specification for electric direct arc melting furnaces |
|
|
IS 12434:1988 |
Specification for coating plating thickness tester destructive type |
|
|
IS 12554 (Part 1):1988 |
Specification for non - destructive coating thickness testing instruments Part 1 eddy current instruments |
|
|
IS 12554 (Part 2):1999 |
Specification for non - destructive coating thickness testing instruments - Part 2 magnetic instruments |
|
|
IS 13211:1991 Reaffirmed but not taken up for revision |
Vapour pressure dial - Type thermometer - Specification |
|
|
IS 14254 (Part 2):2021 |
Industrial-Process Measurement and Control - Programmable Controllers Part 2 Equipment Requirements and Tests Second Revision |
|
|
IS 16923 (Part 1):2018 IEC 60584-1 : 2013 |
Thermocouples Part 1 EMF Specifications and Tolerances First Revision |
|
|
IS 16923 (Part 3):2023 IEC 60584-3: 2021 |
THERMOCOUPLES - PART 3 EXTENSION AND COMPENSATING CABLES - TOLERANCES AND IDENTIFICATION SYSTEM |
|
|
IS 19284 (Part 1):2025 IEC 60240-1:1992 |
Characteristics of Electric Infra-Red Emitters for Industrial Heating Part 1 Short Wave Infra-Red Emitters |
|
|
IS 2053:1974 Reaffirmed but not taken up for revision |
Specification for thermocouple pyrometers First Revision |
|
|
IS 2711:1979 |
Specification for direct reading pH meters Second Revision |
|
|
IS 2848:2023 IEC 60751: 2022 |
INDUSTRIAL PLATINUM RESISTANCE THERMOMETERS AND PLATINUM TEMPERATURE SENSORS |
|
|
IS 3624:1987 |
Specification for pressure and vacuum gauges Second Revision |
|
|
IS 6804:1972 |
Specification for glass electrodes for direct reading pH meter |
|
|
IS 7358:1984 Reaffirmed but not taken up for revision |
Specification for thermocouples First Revision |
|
|
IS 8018:1976 Reaffirmed but not taken up for revision |
Specification for platinum and platinum alloy wires for thermocouple elements |
|
|
IS 8495 (Part 1):1977 Reaffirmed but not taken up for revision |
Specification for ceramic components for thermocouples and resistance thermometers Part 1 terminal blocks |
|
|
IS 8784:1987 Reaffirmed but not taken up for revision |
Specification for thermocouple compensating cables Second Revision |
|
|
IS 8824 (Part 2):1988 |
Specification for electrical moisture meters |