Programme of work

BUREAU OF INDIAN STANDARDS

Management and Systems Department

Programme of Work

MSD3 : Statistical Methods for Quality , Data Analytics and Reliability

Scope : Formulation of standards relating to statistical techniques, data analytics, reliability with a view to propagating their knowledge in industry and promoting their application for quality improvement.
Liaison :

ISO/TC 69 - Applications of statistical methods - Participating (P)
ISO/TC 69/SC 4 - Applications of statistical methods in product and process management
ISO TC 69/SC 4/WG 10 - Control charts
ISO TC 69/SC 4/WG 11 - Process capability and performance
ISO/TC 69/SC 5 - Acceptance sampling - Participating (P)
ISO/TC 69/SC 6 - Measurement methods and results - Participating (P)
ISO/TC 69/SC 6/WG 1 - Accuracy of measurement methods and results
ISO/TC 69/SC 6/WG 5 - Capability of detection
ISO/TC 69/SC 6/WG 7 - Statistical methods to support measurement uncertainty evaluation
ISO/TC 69/SC 7 - Applications of statistical and related techniques for the implementation of Six Sigma - Participating (P)
ISO/TC 69/SC 8 - Application of statistical and related methodology for new technology and product development - Participating (P)
ISO/TC 69/SC 5/WG 10 - Audit sampling
ISO/TC 69/SC 5/WG 3 - Sampling procedures and charts for inspection by variables for percent nonconforming (Revision of ISO 3951)
ISO/TC 69/SC 7/WG 1 - Design of experiments
ISO/TC 69/WG 12 - Big data analytics
ISO/TC 69/SC 4/WG 12 - Implementation of statistical Process Control
ISO/TC 69/SC 5/WG 11 - Random sampling and randomization procedures
ISO/TC 69/SC 5/WG 2 - Sampling procedures for inspection by attributes (Revision of ISO 2859)
ISO/TC 69/SC 7/WG 2 - Process measurement and measurement capability
ISO/TC 69/SC 7/WG 3 - Six sigma methodology
ISO/TC 69/SC 8/WG 2 - Transformation
ISO/TC 69/SC 8/WG 3 - Collection, analysis and optimization
ISO/TC 69/WG 13 - Terminology and symbols
ISO/TC 69/WG 3 - Statistical interpretation of data
ISO/TC 69/CAG - Chair's Advisory Group

Published Standards

SI. No.	IS No.	Title	Reaffirmation Details	No. of Amendments	Degree of Equivalence
1.	IS 10427 (Part 1):1982 Reviewed In : 2021	Designs for industrial experimentation: Part 1 standard designs	April, 2021	1	Indigenous
2.	IS 10427 (Part 2):2006 Reviewed In : 2025	Designs for industrial experimentation: Part 2 orthogonal arrays (First Revision)	June, 2025	-	Indigenous
3.	IS 10645 (Part 1):2016 ISO 22514-1:2014 Reviewed In : 2021	Statistical methods in process management - Capability and performance: Part 1 general principles and concepts (Third Revision)	October, 2021	-	Identical under dual numbering
4.	IS 10645 (Part 2):2019 ISO 22514-2 : 2017 Reviewed In : 2023	Statistical methods in process managenment capability and performace: Part 2 process capability and performance of time dependent process models (Fourth Revision)	April, 2023	-	Identical under dual numbering
5.	IS 10645 (Part 3):2022 22514-3	Statistical methods in process management - Capability and performance: Part 3 machine performance studies for measured data on discrete parts Fourth Revision		-	Identical under dual numbering
6.	IS 10645 (Part 4):2019 ISO 22514-4 : 2016 Reviewed In : 2023	Statistical methods in process management - capability and performance: Part 4 process capability estimates and performance measures (Third Revision)	April, 2023	-	Identical under dual numbering
7.	IS 10645 (Part 5):2023 ISO 22514-5 :2019	Statistical methods in process management Capability and performance Part 5: Process capability estimates and performance for attributive characteristics		-	Identical under dual numbering
8.	IS 10645 (Part 6):2023 ISO 22514-6 :2013	Statistical methods in process management Capability and performance Part 6: Process capability statistics for characteristics following a multivariate normal distribution		-	Identical under dual numbering
9.	IS 10645 (Part 7):2023 ISO 22514-7 :2021	Statistical methods in process management Capability and performance Part 7: Capability of measurement processes		-	Identical under dual numbering
10.	IS 10645 (Part 8):2023 ISO 22514-8 :2014	Statistical methods in process management Capability and performance Part 8: Machine performance of a multi-state production process		-	Identical under dual numbering
11.	IS/ISO 11843-1:1997 ISO 11843-1:1997 Reviewed In : 2023	Capability of detection: Part 1 terms and definitions	April, 2023	-	Identical under single numbering
12.	IS/ISO 11843-2:2000 ISO 11843-2:2000 Reviewed In : 2023	Capability of detection: Part 2 methodology in the linear calibration case	April, 2023	-	Identical under single numbering
13.	IS/ISO 11843-3:2003 ISO 11843-3:2003 Reviewed In : 2023	Capability of detection: Part 3 methodology for determination of the critical value for the response variable when no calibration data are used	April, 2023	-	Identical under single numbering
14.	IS/ISO 11843-4:2003 ISO 11843-4:2003 Reviewed In : 2023	Capability of detection: Part 4 methodology for comparing the minimum detectable value with a given value	April, 2023	-	Identical under single numbering
15.	IS/ISO 11843-5:2008 ISO 11843-5 : 2008 Reviewed In : 2023	Capability of detection: Part 5 methodology in the linear and non - Linear calibration cases	April, 2023	1	Identical under single numbering
16.	IS/ISO 11843-6:2019 11843-6	Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations (First Revision)		-	Identical under single numbering
17.	IS/ISO 11843-7:2018 ISO 11843-7: 2012	Capability of detection Part 7: Methodology based on stochastic properties of instrumental noise		-	Identical under single numbering
18.	IS/ISO/TR 11843-8:2021 ISO/TR 11843-8:2021	Capability of detection Part 8: Guidance for the implementation of the ISO 11843 series		-	Identical under single numbering
19.	IS 12347:1988 Reviewed In : 2025	Analysis of means - A graphical procedure	March, 2025	-	Indigenous
20.	IS 12348:1988 Reviewed In : 2020 Decision taken to Reaffirm and Archive	Use of probability papers	May, 2020	-	Indigenous
21.	IS/ISO 13528:2022 ISO 13528 :2022	Statistical Methods for Use in Proficiency Testing by Interlaboratory Comparison (First Revision)		-	Identical under single numbering
22.	IS 14277:2024	Statistical Interpretation of Test Results â€” Estimation of Mean, Standard Deviation and Regression Coefficient â€” Confidence Interval (First Revision)		-	Indigenous
23.	IS 14978:2002 Reviewed In : 2025	New seven tools for quality management	March, 2025	-	Indigenous
24.	IS 15202 (Part 1):2002 ISO 11462-1:2001 Reviewed In : 2022	Guidelines for implementation of statistical process control (Spc): Part 1 elements of SPC	November, 2022	-	Identical under dual numbering
25.	IS 15202 (Part 2):2012 ISO 11462-2:2010 Reviewed In : 2022	Guidelines for implementation of statistical process control (SPC): Part 2 catalogue of tools and techniques	April, 2022	-	Identical under dual numbering
26.	IS 15202 (Part 4):2023 ISO/TR 11462-4:2022	Guidelines for implementation of statistical process control SPC Part 4: Reference data sets for measurement process analysis software validation		-	Identical under dual numbering
27.	IS 15280:2003 Reviewed In : 2025	Quality function deployment	March, 2025	-	Indigenous
28.	IS 15393 (Part 1):2003 ISO 5725-1:1994 Reviewed In : 2022	Accuracy (Trueness And Precision) of measurement methods and results: Part 1 general principles and definitions	November, 2022	-	Identical under dual numbering
29.	IS 15393 (Part 2):2021 ISO 5725-2	Accuracy trueness and precision of measurement methods and results -- Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method		-	Identical under dual numbering
30.	IS 15393 (Part 3):2003 ISO 5725-3:1994 Reviewed In : 2022	Accuracy (Trueness And Precision) of measurement methods and results: Part 3 intermediate measures of the precision of a standard measurement method	November, 2022	-	Identical under dual numbering
31.	IS 15393 (Part 4):2021 5725-4	Accuracy trueness and precision of measurement methods and results -- Part 4: Basic method for the determination of the trueness of a standard measurement method (First Revision)		-	Identical under dual numbering
32.	IS 15393 (Part 5):2003 ISO 5725-5:1998 Reviewed In : 2022	Accuracy (Trueness And Precision) of measurement methods and results: Part 5 alternative methods for the determination of the precision of a standard measurement method	November, 2022	-	Identical under dual numbering
33.	IS 15393 (Part 6):2003 ISO 5725-6:1994 Reviewed In : 2022	Accuracy (Trueness And Precision) of measurement methods and results: Part 6 use in practice of accuracy values	November, 2022	-	Identical under dual numbering
34.	IS 15431:2003 Reviewed In : 2025	Seven basic tools for quality management	May, 2025	-	Indigenous
35.	IS 15436 (Part 1):2004 ISO 11648-1 Reviewed In : 2022	Statistical aspects of sampling from bulk materials: Part 1 general principles	November, 2022	-	Identical under dual numbering
36.	IS 15436 (Part 2):2014 ISO 11648-2:2001 Reviewed In : 2023	Statistical aspects of sampling from bulk materials: Part 2 sampling of particulate materials	April, 2023	-	Identical under dual numbering
37.	IS 1548:2024	Lot Sampling â€” Manual on Basic Principles (Third Revision)		-	Indigenous
38.	IS 15550:2005 Reviewed In : 2025	Failure mode effects analysis	March, 2025	-	Indigenous
39.	IS 15564:2005 Reviewed In : 2025	Benchmarking	March, 2025	-	Indigenous
40.	IS 16123 (Part 1):2013 ISO 13053-1 : 2011 Reviewed In : 2022	Quantitative methods in process improvement - Six sigma: Part 1 the dmaic methodology	November, 2022	-	Identical under dual numbering
41.	IS 16123 (Part 2):2013 ISO 13053-2 : 2011 Reviewed In : 2022	Quantitative methods in process improvement - Six sigma: Part 2 tools and techniques	November, 2022	-	Identical under dual numbering
42.	IS 16174:2014 ISO 10725 : 2000 Reviewed In : 2023	Acceptance sampling plans and procedures for the inspection of bulk materials	April, 2023	-	Identical under dual numbering
43.	IS 16177:2014 ISO 11095 : 1996 Reviewed In : 2023	Linear calibration using reference materials	April, 2023	-	Identical under dual numbering
44.	IS 16179 (Part 1):2014 ISO 10576-1 : 2003 Reviewed In : 2023	Statistical methods - Guidelines for the evaluation of conformity with specified requirements: Part 1 general principles	April, 2023	-	Identical under dual numbering
45.	IS 16181:2014 ISO 11453 : 1996 Reviewed In : 2023	Statistical interpretation of data - Tests and confidence intervals relating to proportions	April, 2023	-	Identical under dual numbering
46.	IS/ISO 16269-4:2010 ISO 16269-4 : 2010 Reviewed In : 2021	Statistical interpretation of data: Part 4 detection and treatment of outliers	May, 2021	-	Identical under single numbering
47.	IS/ISO 16269-6:2014 ISO 16269-6 : 2014 Reviewed In : 2022	Statistical interpretation of data: Part 6 determination of statistical tolerance intervals	April, 2022	-	Identical under single numbering
48.	IS/ISO 16269-7:2001 ISO 16269-7 : 2001 Reviewed In : 2021	Statistical interpretation of data: Part 7 median - Estimation and confidence intervals	May, 2021	-	Identical under single numbering
49.	IS/ISO 16269-8:2004 ISO 16269-8 : 2004 Reviewed In : 2025	Statistical interpretation of data: Part 8 determination of prediction intervals	March, 2025	-	Identical under single numbering
50.	IS/ISO 16337:2021 16337	Application of statistical and related methods to new technology and product development process Robust tolerance design RTD		-	Identical under single numbering
51.	IS 16522:2016 ISO 16336 : 2014 Reviewed In : 2021	Applications of statistical and related methods to new technology and product development process - Robust parameter design (RPD)	October, 2021	-	Identical under dual numbering
52.	IS 16716:2018 Reviewed In : 2025	Robust Estimation for Location and Scale Parameters	June, 2025	-	Indigenous
53.	IS/ISO/TR 18532:2009 ISO/TR 18532 : 2009 Reviewed In : 2022	Guidance on the application of statistical methods to quality and to industrial standardization	May, 2022	-	Identical under single numbering
54.	IS 2:2022	RULES FOR ROUNDING OFF NUMERICAL VALUES (Second Revision)		1	Indigenous
55.	IS/ISO 21748:2017 ISO 21748 : 2017 Reviewed In : 2022	Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation (First Revision)	May, 2022	-	Identical under single numbering
56.	IS/ISO/TR 22971:2005 ISO/TR 22971 : 2005 Reviewed In : 2018	Accuracy (Trueness and Precision) of Measurement Methods and Results - Practical Guidance for the Use of ISO 5725-2 : 1994 in Designing, Implementing and Statistically Analysing Interlaboratory Repeatability and Reproducibility Results	May, 2018	-	Identical under single numbering
57.	IS 2500 (Part 1):2000 ISO 2859-1:1999 Reviewed In : 2021	Sampling procedures for inspection by attributes: Part 1 sampling schemes indexed by acceptance quality limit (AQL) for lot - By - Lot inspection (Third Revision)	September, 2021	3	Identical under dual numbering
58.	IS 2500 (Part 3):2021 2500-3	Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limiting quality LQ for isolated lot inspection		-	Identical under dual numbering
59.	IS 2500 (Part 4):2014 ISO 2859-3 : 2005 Reviewed In : 2023	Sampling procedures for inspection by attributes: Part 4 skip - Lot sampling procedures	April, 2023	-	Identical under dual numbering
60.	IS 2500 (Part 5):2021 2859-4	Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels ( First Revision)		-	Identical under dual numbering
61.	IS 2500 (Part 6):2014 ISO 2859-5 : 2005 Reviewed In : 2023	Sampling procedures for inspection by attributes: Part 6 system of sequential sampling plans indexed by acceptance quality limit (AQL) for lot - By - Lot inspection	April, 2023	-	Identical under dual numbering
62.	IS/ISO 28591:2017 ISO 28591 : 2017 Reviewed In : 2025	Sequential Sampling Plans by Attributes	March, 2025	-	Identical under single numbering
63.	IS/ISO 28592:2017 ISO 28592:2017	Double sampling plans by attributes with minimal sample sizes indexed by producers risk quality PRQ and consumers risk quality CRQ		-	Identical under single numbering
64.	IS/ISO 28593:2017 ISO 28593 : 2017 Reviewed In : 2022	Acceptance Sampling Procedures by attributes â€” Accept Zero Sampling System Based on Credit Principle for Controlling Outgoing Quality	May, 2022	-	Identical under single numbering
65.	IS/ISO 28594:2017 ISO 28594:2017	Combined accept-zero sampling systems and process control procedures for product acceptance		-	Identical under single numbering
66.	IS/ISO 28598-1:2017 ISO 28598-1:2017	Acceptance sampling procedures based on the allocation of priorities principle APP Part 1: Guidelines for the APP approach		-	Identical under single numbering
67.	IS/ISO 28598-2:2017 ISO 28598-2:2017	Acceptance sampling procedures based on the allocation of priorities principle APP Part 2: Coordinated single sampling plans for acceptance sampling by attributes		-	Identical under single numbering
68.	IS/ISO 28640:2010 ISO 28640 : 2010 Reviewed In : 2023	Random variate generation methods	April, 2023	-	Identical under single numbering
69.	IS/ISO 28801:2011 ISO 28801 : 2011 Reviewed In : 2023	Double Sampling Plans by Attributes with Minimal Sample Sizes, Indexed by Producerï¿½s Risk Quality (PRQ) and Consumerï¿½s Risk Quality (CRQ)	April, 2023	-	Identical under single numbering
70.	IS/ISO 3951-1:2022 ISO 3951-1: 2022	Sampling procedures for inspection by variables Part 1: Specification for single sampling plans indexed by acceptance quality limit AQL for lot-by-lot inspection for a single quality characteristic and a single AQL First Revision		-	Identical under single numbering
71.	IS/ISO 3951-2:2016 ISO 3951-2 : 2013 Reviewed In : 2021	Sampling procedures for inspection by variables: Part 2 general specification for single sampling plans indexedby acceptance quality limit (AQL) for lot - By - Lot inspection of independent quality characteristics	October, 2021	-	Identical under single numbering
72.	IS/ISO 3951-3:2007 ISO 3951-3 : 2007 Reviewed In : 2021	Sampling procedures for inspection by variables: Part 3 double sampling schemes indexed by acceptance quality limit (AQL) for lot - By - Lot inspection	April, 2021	-	Identical under single numbering
73.	IS/ISO 3951-4:2011 ISO 3951-4 : 2011 Reviewed In : 2021	Sampling procedures for inspection by variables: Part 4 procedures for assessment of declared quality levels	May, 2021	-	Identical under single numbering
74.	IS/ISO 3951-5:2006 ISO 3951-5 : 2006 Reviewed In : 2021	Sampling procedures for inspection by variables: Part 5 sequential sampling plans indexed by acceptance qualityLimit (AQL) for inspection by variables (Known Standard Deviation)	April, 2021	-	Identical under single numbering
75.	IS/ISO 39511:2018 ISO 39511 : 2018 Reviewed In : 2025	Sequential Sampling Plans for Inspection by Variables for Percent Nonconforming ( Known Standard Deviation )	March, 2025	-	Identical under single numbering
76.	IS 397 (Part 0):2021 Reviewed In : 2025	Methods for Statistical Quality Control during Production - Part 0 Guidelines for Selection of Control Charts	March, 2025	-	Not Equivalent
77.	IS 397 (Part 1):2003 Reviewed In : 2018	Method for statistical quality control during production: Part 1 control charts for variables (Second Revision)	April, 2018	-	Indigenous
78.	IS 397 (Part 2):2003 Reviewed In : 2018	Method for statistical quality control during production: Part 2 control charts for attributes (Third Revision)	April, 2018	-	Indigenous
79.	IS 397 (Part 3):2019 ISO 7870-5 : 2014 Reviewed In : 2023	Methods for Statistical Quality Control during Production Part 3 Specialized Control Charts ( Second Revision )	April, 2023	-	Identical under dual numbering
80.	IS 397 (Part 4):2022 7870-4	Methods for statistical quality control during production: Part 4 Cumulative sum charts Third Revision		-	Identical under dual numbering
81.	IS 397 (Part 5):2021 ISO 7870-3:2020 Reviewed In : 2025	Methods for statistical quality control during production – Part 5: Acceptance control charts (First Revision)	March, 2025	-	Identical under dual numbering
82.	IS 397 (Part 6):2025 ISO 7870-6:2024	Methods for Statistical Quality Control During Production Part 6: EWMA control charts for the process mean First Revision		-	Identical under dual numbering
83.	IS 397 (Part 6):2018 ISO 7870-6 : 2016 Reviewed In : 2022	Methods for Statistical Quality Control During Production Part 6 EWMA Control Charts	November, 2022	-	Identical under dual numbering
84.	IS 397 (Part 8):2018 ISO 7870-8 : 2017 Reviewed In : 2022	Methods for Statistical Quality Control during Production Part 8 Charting Techniques for Short Runs and Small Mixed Batches	November, 2022	-	Identical under dual numbering
85.	IS 397 (Part 9):2021 7870-9 Reviewed In : 2025	Methods for statistical quality control during production -- Part 9: Control charts for stationary processes	March, 2025	-	Identical under dual numbering
86.	IS 397 (Part 10):2024 ISO 7870-2: 2023	Methods for statistical quality control during production ï¿½ Part 10: Shewhart control charts		-	Identical under dual numbering
87.	IS 4905:2015 ISO 24153 : 2009 Reviewed In : 2025	Random sampling and randomization procedures (First Revision)	March, 2025	-	Identical under dual numbering
88.	IS 5002:2024	Method for Determination of Sample Size to Estimate the Average Quality of a Lot or Process (First Revision)		-	Indigenous
89.	IS 6200 (Part 1):2018 Reviewed In : 2024	Statistical tests of significance: Part 1 normal, t - And f - Tests (Fourth Revision)	December, 2024	-	Indigenous
90.	IS 6200 (Part 2):2004 Reviewed In : 2020	Statistical tests of significance: Part 2 X2 - Test (Second Revision)	May, 2020	-	Indigenous
91.	IS 6200 (Part 3):2003 Reviewed In : 2024	Statistical tests of significance: Part 3 tests for normality (Second Revision)	December, 2024	-	Indigenous
92.	IS 6200 (Part 4):2008 Reviewed In : 2024	Statistical tests of significance: Part 4 non - Parametric tests (First Revision)	December, 2024	-	Indigenous
93.	IS 7200 (Part 1):2019 Reviewed In : 2025	Presentation of statistical data: Part 1 tabulation and summarization (Third Revision)	June, 2025	-	Indigenous
94.	IS 7200 (Part 2):1975 Reviewed In : 2021	Presentation of statistical data: Part 2 diagrammatic representation of data	October, 2021	-	Indigenous
95.	IS 7300:2003 Reviewed In : 2025	Methods of regression and correlation (Second Revision)	March, 2025	-	Indigenous
96.	IS 7600:1975 Reviewed In : 2021	Analysis of variance	October, 2021	-	Indigenous
97.	IS 7920 (Part 1):2012 Reviewed In : 2022	Statistical - Vocabulary and symbols: Part 1 general statistical terms and terms used in probability (Third Revision)	April, 2022	-	Indigenous
98.	IS 7920 (Part 2):2012 ISO 3534-2:2006 Reviewed In : 2022	Statistics - Vocabulary and symbols: Part 2 applied statistics (Third Revision)	April, 2022	-	Identical under dual numbering
99.	IS 7920 (Part 3):2018 ISO 3534-3 : 2013 Reviewed In : 2022	Statistics - Vocabulary and symbols: Part 3 design of experiments (Third Revision)	October, 2022	-	Identical under dual numbering
100.	IS 7920 (Part 4):2016 ISO 3534-4 : 2013 Reviewed In : 2022	Statistics - Vocabulary and symbols: Part 4 survey sampling	May, 2022	-	Identical under dual numbering
101.	IS 9300 (Part 1):1979 Reviewed In : 2021	Statistical models for industrial applications: Part 1 discrete models	April, 2021	1	Indigenous
102.	IS 9300 (Part 2):1989 Reviewed In : 2025	Statistical models for industrial applications: Part 2 continuous models (First Revision)	June, 2025	2	Indigenous

Standards Under Develpoment

Projects Approved

SI. No.	Doc No	TITLE
No Records Found

Preliminary Draft Standards

SI. No.	Doc No	TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.	Doc No	TITLE
1	MSD 3 (28687) Revision of: IS 15393:2003	Accuracy trueness and precision of measurement methods and results Part 1 General principles and definitions
2	MSD 3 (28690) Revision of: IS 15393:2003	Accuracy trueness and precision of measurement methods and results Part 3 Intermediate precision and alternative designs for collaborative studies
3	MSD 3 (28692) Revision of: IS/ISO 11843:2018	Capability of detection Part 7 Methodology based on stochastic properties of instrumental noise
4	MSD 3 (28696)	Experimental designs for evaluation of uncertainty Use of factorial designs for determining uncertainty functions

Draft Standards Completed WC Stage

SI. No.	Doc No	TITLE
1	MSD 3 (24997)	Quality of Measurement Results Criteria for Variation in Repeat-Replicate Testing
2	MSD 3 (27775)	Capability of detection Part 2 methodology in the linear calibration case Amendment - 1
3	MSD 3 (27776)	Accuracy Trueness And Precision of measurement methods and results Part 5 alternative methods for the determination of the precision of a standard measurement method Amendment - 1
4	MSD 3 (27778)	Accuracy Trueness And Precision of measurement methods and results Part 6 use in practice of accuracy values Amendment - 1
5	MSD 3 (27939) Revision of: IS 6200:2004	Statistical Tests of Significance Part 1 Normal t- Chi-squared F-Tests First Revision
6	MSD 3 (27963)	Statistical Methods - Guidelines for the Evaluation of Conformity with Specified Requirements
7	MSD 3 (28031)	Statistical methods in process management Capability and performance Part 7 Capability of measurement processes Amendment - 1
8	MSD 3 (28078)	Statistical methods Six Sigma Basic criteria underlying benchmarking for Six Sigma in organisations
9	MSD 3 (28093)	Capability of detection Part 5 methodology in the linear and non - Linear calibration cases Amendment - 1
10	MSD 3 (28095)	Quantitative Methods in Process Improvement - Six Sigma - Competencies for Key Personnel and their Organizations in relation to Six Sigma and Lean Implementation
11	MSD 3 (28178)	Data ethics - Ethical use of Data by Organisation - Guidelines
12	MSD 3 (28266) Revision of: IS 6200:2003	Statistical Tests of Significance Part 3 Test for normality

Finalized Draft Indian Standard

SI. No.	Doc No	TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.	Doc No	TITLE
No Records Found

Total Published Standards:100 Total Standards Under development : 16

Aspect Wise Report

Product:	1
Code of Practices :	10
Methods of Test :	21
Terminology :	4
Dimensions :	0
System Standard :	0
Safety Standard :	0
Others :	65
Service Specification :	0
Process Specification :	0
Unclassified :	0

Total :101

Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.	IS No.	Title
1.	IS 10645:2004 Reviewed In : 2014	Methods for Estimation of Process Capability and Process Performance
2.	IS 12801:1989 Reviewed In : 2006	Pareto Diagram And Cause And Effect Diagram
3.	IS 13131:1991 Reviewed In : 2016	Statistical Tolerance Interval - Methods for Determination
4.	IS 14977:2001 Reviewed In : 2022	Control charts based on inspection by gauging
5.	IS 16188:2017 ISO 8422 : 2006	Sequential sampling plans for inspection by attributes
6.	IS 16510:2016 ISO 8423:2008 Reviewed In : 2016	Sequential sampling plans for inspection by variables for percent nonconforming Known Standard Deviation
7.	IS 2500 (Part 2):1965 Reviewed In : 2016	Sampling inspection procedures Part 2 inspection by variables for percent defective
8.	SP 28:1994	Handbook on Statistical Quality Control
9.	IS 5420 (Part 1):1969 Reviewed In : 2001	Guide on precision of test methods Part 1 Principles and applications
10.	IS 5420 (Part 2):1973 Reviewed In : 2001	Guide on precision of test methods Part 2 Inter laboratory testing
11.	IS 8900:1978 Reviewed In : 2016	Criteria for the rejection of outlying observations

Annexure-II :List of Indian Product Standards

SI. No.	IS No. & Year	Title
1.	IS 16179 (Part 1):2014 ISO 10576-1 : 2003 Reviewed In : 2023	Statistical methods - Guidelines for the evaluation of conformity with specified requirements Part 1 general principles