Programme of work

• Scope : Standardization of chassis assembly, aerodynamics and ergonomic aspects of vehicles and the body, body fittings, seats, vehicle accessories and garage equipment etc. b) Co-ordination of work with ISO/TC 22 and its relevant Sub-committees ISO/TC 22/SC 35, ISO/TC 22/SC 38 and ISO/TC 22/SC 40.
• Liaison :
  ISO TC 22/SC 35 - Lighting and visibility - Participating (P)

  ---

  ISO TC 22/SC 38 - Motorcycles and impact testing - Participating (P)

  ---

  ISO TC 22 - Road vehicles - Participating (P)

  ---

  ISO TC 22/SC 40 - Specific aspects for light and heavy commercial vehicles, busses and trailers - Observer (O)

SI. No.	IS No.	Title	Reaffirmation Details	No. of Amendments	Degree of Equivalence
1.	IS 10331:1982 Reviewed In : 2022	Specification for fuel tap for mopeds	December, 2022	-	Indigenous
2.	IS 10791:1983 Reviewed In : 2023	Specification for control cable assembly for mopeds	November, 2023	-	Indigenous
3.	IS 11028:2024	Handle Bars for Mopeds � Specification ( First Revision )		-	Indigenous
4.	IS 11030:2024	Mopeds Seat Pillars � Specification		-	Indigenous
5.	IS 11140:2024	Automotive Vehicles — Footrests for Two - Wheeled Motor Vehicles — Requirements (First Revision)		-	Indigenous
6.	IS 12056:1987 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Recommendations for safety requirements for fuel tank assembly of automotive vehicles	June, 2024	3	Indigenous
7.	IS 13506:2013 Reviewed In : 2023	Automotive vehicles - Method of test for articulation (First Revision)	October, 2023	1	Indigenous
8.	IS 13941:1994 Reviewed In : 2023	.automotivevehicles - Wheel fasteners andhubcaps - General requirements	November, 2023	1	Indigenous
9.	IS 13942 (Part 1):2019 Reviewed In : 2024	Automotive Vehicles - External Projection Part 1 Performance Requirements for M1 Category of Vehicles ( First Revision )	June, 2024	2	Indigenous
10.	IS 13942 (Part 2):2020 Reviewed In : 2024	Automotive Vehicles — External Projections Part 2 Performance Requirements for Vehicles of Categories Other than M1 ( First Revision )	December, 2024	1	Indigenous
11.	IS 13943:2017 Reviewed In : 2021	Automotive vehicles - Wheel guards for vehicles of m1 category - Performance (First Revision)	November, 2021	1	Indigenous
12.	IS 13944:2021	Automotive vehicles - Window retention and release systems for buses - Safety requirements		-	Indigenous
13.	IS 14210:1994 Reviewed In : 2019	Automotive vehicles rear view mirrors - Specification	March, 2019	-	Indigenous
14.	IS 14224:1995 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Automotive vehicles - Registration plate - Requirements	June, 2024	-	Indigenous
15.	IS 14226:1995 Reviewed In : 2023	Automotive vehicles - Hood latch system i - Method of test	November, 2023	1	Indigenous
16.	IS 14272 (Part 1):1995 ISO 3833	Automotive vehicles - Types - Terminology: Part 1 three and four wheelers	January, 2020	-	Indigenous
17.	IS 14272:2011 Reviewed In : 2020	AUTOMOTIVE VEHICLES — TYPES — TERMINOLOGY ( First Revision )	January, 2020	4
18.	IS 14346 (Part 1):1996 Reviewed In : 2017	Automotive Vehicles - Passenger Cars - Verification of Drivers Direct Field of View - Part 1 : Vehicle Positioning for Static Measurement	March, 2017	-	Indigenous
19.	IS 14346 (Part 2):1996 Reviewed In : 2017	Automotive vehicles - Passenger cars verification of drivers direct field of view (Part 2) Method of test	March, 2017	-	Indigenous
20.	IS 14413:2024	Two Wheeled Motor Vehicles — Location, Identification and Operation of Controls, Tell-Tales and Indicators (First Revision)		-	Indigenous
21.	IS 14495:2024	Automotive Vehicles — Pillion Hand-Holds for Two-Wheeled Motor Vehicles —Requirements (First Revision)		-	Indigenous
22.	IS 14681:2021	AUTOMOTIVE VEHICLES FUEL TANKS FOR TWO WHEELERS THREE WHEELERS AND QUADRICYCLES		-	Indigenous
23.	IS 15061:2002 Reviewed In : 2022	Automotive vehicles - Flammability requirements	February, 2022	1	Indigenous
24.	IS 15547:2005 Reviewed In : 2024	Automotive vehicles - Plastic fuel tank for four wheelers	June, 2024	3	Indigenous
25.	IS 15943:2012 Reviewed In : 2022	Automotive vehicles - Hand - Holds for three, four and more than four wheeled motor vehicles - Specification	June, 2022	1	Indigenous
26.	IS 16219:2014 Reviewed In : 2024	Automotive vehicles - Metallic fuel tanks - Specification	June, 2024	3	Indigenous
27.	IS 16332:2024	Automotive Vehicles — Strength of Superstructure of Large Passenger Vehicles (First Revision)		-	Indigenous
28.	IS 16604:2017 Reviewed In : 2022	Automotive vehicles - Arrangement of foot controls of vehicles - Specification	September, 2022	1	Indigenous
29.	IS 16712:2018 Reviewed In : 2023	Automative vehicles - Spray suppression systems for two wheeled motor vehicles	October, 2023	1	Indigenous
30.	IS 18151:2023	Requirememts of Temporary Cabin for Drive-Away-Chasis ConfigurationVehicles		-	Indigenous
31.	IS 18615:2024	FIELD OF VISION OF MOTOR VEHICLE DRIVERS FOR M1 AND L7-M CATEGORY		-	Indigenous
32.	IS 19025:2023	Statutory Plates and Inscriptions for Motor Vehicles their Location and Method of attachment - Vehicle Identification Numbering System		-	Indigenous
33.	IS 19268:2025	Guideline Standard � Microdot Systems � Product Specification		-	Indigenous
34.	IS 2553 (Part 2):2019	Safety glass - Specification: Part 2 for road transport (First Revision)	-	6	Indigenous
35.	IS 8116:1976 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for moped spokes and nipples for spokes	June, 2024	-	Indigenous
36.	IS 9238:1979 Reviewed In : 2017	Lateral spacing of foot controls for passenger cars	February, 2017	-	Modified/Technically Equivalent

SI. No.	Doc No	TITLE
No Records Found

SI. No.	Doc No	TITLE
No Records Found

SI. No.	Doc No	TITLE
No Records Found

SI. No.	Doc No	TITLE
No Records Found

SI. No.	Doc No	TITLE
1	TED 6 (28210) Revision of: IS 14210:1994	Devices for Indirect Vision Mirrors - Specification Part 1 for A M N C Category and L Category with Bodywork Vehicles First Revision

SI. No.	Doc No	TITLE
1	TED 6 (01030)	Automotive Vehicles Spray Suppression Systems for Two Wheeled Motor Vehicles
2	TED 6 (00741)	AUTOMOTIVE VEHICLES -STRENGTH OF SUPERSTRUCTURE OF LARGE PASSENGER VEHICLES
3	TED 6 (00813)	AUTOMOTIVE VEHICLES - LOCKING SYSTEMS AND DOOR RETENTION COMPONENTS - GENERAL REQUIREMENTS
4	TED 6 (00950)	AUTOMOTIVE VEHICLES - ARRANGMENT OF FOOT CONTROLS OF VEHICLES - SPECIFICATION
5	TED 6 (01020)	Springd - Vocabulary
6	TED 6 (01021)	Shot peening of steel parts
7	TED 6 (01022)	Technical Product Documentatin - Springs Part 2 Presentation of Data for Cylindrical Helical Compression Springs
8	TED 6 (01053)	Automotive vehicles - Wheel guards for passenger cars - Performance requirements Amendment - 1
9	TED 6 (01054)	Automotive vehicles - Plastic fuel tank for four wheelers Amendment - 1
10	TED 6 (01059) Revision of: IS 1135:2018	SPRINGS - LEAF SPRINGS ASSEMBLY FOR AUTOMOBILES
11	TED 6 (01060) Revision of: IS 2553:2019	Safety Glass - Part 2 For Road Transport
12	TED 6 (10459)	Automotive Vehicles - Metallic Fuel Tanks - Specification Amendment - 1
13	TED 6 (12114)	Automotive Vehicles Types Terminology Amendment - 3
14	TED 6 (12640) Revision of: IS 13942:1994	AUTOMOTIVE VEHICLES EXTERNAL PROJECTION - PERFORMANCE REQUIREMENTS FOR M1 CATEGORY OF VEHICLES
15	TED 6 (13298) Revision of: IS 14681:1999	AUTOMOTIVE VEHICLES FUEL TANKS FOR TWO WHEELERS THREE WHEELERS AND QUADRICYCLES
16	TED 6 (13302)	AUTOMOTIVE VEHICLES - EXTERNAL PROJECTIONS PERFORMANCE REQUIREMENTS FOR VEHICLES OF CATEGORIES OTHER THAN M1 IS 13942 Part 2
17	TED 6 (13504)	Helical Compression Springs - Part 5 Hot Coiled Springs Made from Circular Section Bars Amendment - 1
18	TED 6 (13631)	Automotive Vehicles Wheel Guards for Vehicles of M1 Category Performance First Revision Amendment - 1
19	TED 6 (13667)	Automotive Vehicles - Arrangement of Foot Controls of Vehicles - Specification
20	TED 6 (14012)	Requirememts of Temporary Cabin for Drive-Away-Chasis ConfigurationVehicles
21	TED 6 (14013)	FIELD OF VISION OF MOTOR VEHICLE DRIVERS FOR M1 AND L7-M CATEGORY
22	TED 6 (14015)	Statutory Plates and Inscriptions for Motor Vehicles their Location and Method of attachment - Vehicle Identification Numbering System
23	TED 6 (15200) Revision of: IS 2553:2019	Safety glass - Specification Part 2 for road transport First Revision
24	TED 6 (15754) Revision of: IS 13944:1994	Automotive vehicles - Window retention and release systems for buses - Safety requirements
25	TED 6 (15877)	IS 15547 2005 Automotive vehicles - Plastic fuel tank for four wheelers - Amendment - 2
26	TED 6 (15878)	IS 16219 2014 Automotive vehicles - Metallic fuel tanks - Specification Amendment - 2
27	TED 6 (16788)	Safety glass - Specification Part 2 for road transport First Revision Amendment - 2
28	TED 6 (16819)	DRAFT AMENDMENT NO 4 TO IS 14272 2011 - AUTOMOTIVE VEHICLES TYPES TERMINOLOGY
29	TED 6 (17774)	Amendment No 3 to IS 2553 Part 2 2019 Safety glass - Specification Part 2 for road transport First Revision
30	TED 6 (17822)	Amendment No 1 To IS 16712 2018 AUTOMOTIVE VEHICLES SPRAY SUPPRESSION SYSTEMS FOR TWO WHEELED MOTOR VEHICLES
31	TED 6 (17824)	Amendment No 1 To IS 13942 Part 1 2019 Automotive Vehicles External Projections Part 1- Performance Requirements for M1 category of vehicles First Revision
32	TED 6 (17825)	Amendment No 1 To IS 15943 2012 AUTOMOTIVE VEHICLES HAND-HOLDS FOR THREE FOUR AND MORE THAN FOUR WHEELED MOTOR VEHICLES SPECIFICATION
33	TED 6 (17826)	Amendment No 1 To IS 13942 Part 2 2020 Automotive Vehicles External Projections Part 2- Performance Requirements for vehicles of categories other than M1
34	TED 6 (18171)	Automotive vehicles - Method of test for articulation First Revision Amendment - 1
35	TED 6 (19426) Revision of: IS 11140:1984	Automotive Vehicles Requirements of Footrests for Two - Wheeled Motor Vehicles
36	TED 6 (19526)	AUTOMOTIVE VEHICLES FUEL TANKS FOR TWO WHEELERS THREE WHEELERS AND QUADRICYCLES Amendment - 1
37	TED 6 (19640) Revision of: IS 16332:2017	Automotive Vehicles Strength of Superstructure of Large Passenger Vehicles First Revision
38	TED 6 (19956)	Safety glass - Specification Part 2 for road transport First Revision Amendment - 4
39	TED 6 (19957) Revision of: IS 11028:1984	Handle Bars for Mopeds Specification First Revision
40	TED 6 (19958) Revision of: IS 11030:1984	Mopeds Seat Pillars Specification
41	TED 6 (20138) Revision of: IS 14413:1996	TWO WHEELED MOTOR VEHICLES - LOCATION IDENTIFICATION AND OPERATION OF CONTROLS TELL-TALES AND INDICATORS
42	TED 6 (20424) Revision of: IS 14495:1998	AUTOMOTIVE VEHICLES PILLION HAND-HOLDS FOR TWO-WHEELED MOTOR VEHICLES - REQUIREMENTS First Revision
43	TED 6 (24632)	Automotive Vehicles - External Projection Part 1 Performance Requirements for M1 Category of Vehicles Amendment - 2
44	TED 6 (24775)	Safety glass - Specification Part 2 for road transport First Revision Amendment - 5
45	TED 6 (25730)	Automotive vehicles - Metallic fuel tanks - Specification Amendment - 3
46	TED 6 (25731)	Automotive vehicles - Plastic fuel tank for four wheelers Amendment - 3
47	TED 6 (26181)	Guideline Standard Microdot Systems Product Specification
48	TED 6 (26230)	Automotive Vehicles Spray-Suppression Systems
49	TED 6 (28328) Revision of: IS 14210:1994	Devices for Indirect Vision Mirrors - Specification Part 2 for L Category Vehicles without Bodywork Partly or Wholly Encloses the Driver
50	TED 6 (28457)	Safety glass - Specification Part 2 for road transport First Revision Amendment - 6
51	TED 6 (33152)	Road vehicles Testing the abrasion resistance of automotive glazing with the windscreen wiper test
52	TED 6 (33198)	Devices for Indirect Vision Camera Monitoring System CMS Specification Part 2 for A M N C and L Category with Bodywork Vehicles

Product:   20  Code of Practices :    2  Methods of Test :   4  Terminology :   2  Dimensions :   0  System Standard :   0  Safety Standard :   4  Others :    3  Service Specification :    0  Process Specification :    0  Unclassified :    0

SI. No.	IS No.	Title
1.	IS 10277:1982	Handle grips for mopeds
2.	IS 10586:1983 Reviewed In : 2011	Handle Grips for Scooters and Motorcycles
3.	IS 11981:1987 Reviewed In : 2003	Recommendation for SafetyRequirements for Reflecting Surfaces of Automotive Vehicles
4.	IS 13750:1993 ISO 3832.2 Reviewed In : 2009	Automotive vehicle - Reference volume - Luggage compartment of passenger cars - Method of measurement
5.	IS 13894:1994 ISO 3779 Reviewed In : 2009	Automotive Vehicles - Identification Numbering Systems - Recommendations
6.	IS 13942:1994 Reviewed In : 2014	Automotive vehicles - External projections - Performance requirements
7.	IS 14247:1995 Reviewed In : 2019	Automotive vehicles - Exterior protection for passenger car performance requirements
8.	IS 2553 (Part 2):1992 Reviewed In : 2015	Safety Glass - Part 2 For Road Transport
9.	IS 9226:1979 ISO 2416 Reviewed In : 2012	Recommendations for load distribution for passenger cars
10.	IS 9237:1979 ISO 2575 Reviewed In : 2010	Symbols for Controls Indicators and Tell-Tales for Road Vehicles

SI. No.	IS No. & Year	Title
1.	IS 10331:1982 Reviewed In : 2022	Specification for fuel tap for mopeds
2.	IS 10791:1983 Reviewed In : 2023	Specification for control cable assembly for mopeds
3.	IS 11028:2024	Handle Bars for Mopeds Specification First Revision
4.	IS 11030:2024	Mopeds Seat Pillars Specification
5.	IS 11140:2024	Automotive Vehicles Footrests for Two - Wheeled Motor Vehicles Requirements First Revision
6.	IS 13941:1994 Reviewed In : 2023	automotivevehicles - Wheel fasteners andhubcaps - General requirements
7.	IS 13943:2017 Reviewed In : 2021	Automotive vehicles - Wheel guards for vehicles of m1 category - Performance First Revision
8.	IS 14210:1994 Reviewed In : 2019	Automotive vehicles rear view mirrors - Specification
9.	IS 14224:1995 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Automotive vehicles - Registration plate - Requirements
10.	IS 14495:2024	Automotive Vehicles Pillion Hand-Holds for Two-Wheeled Motor Vehicles Requirements First Revision
11.	IS 14681:2021	AUTOMOTIVE VEHICLES FUEL TANKS FOR TWO WHEELERS THREE WHEELERS AND QUADRICYCLES
12.	IS 15061:2002 Reviewed In : 2022	Automotive vehicles - Flammability requirements
13.	IS 15547:2005 Reviewed In : 2024	Automotive vehicles - Plastic fuel tank for four wheelers
14.	IS 15943:2012 Reviewed In : 2022	Automotive vehicles - Hand - Holds for three four and more than four wheeled motor vehicles - Specification
15.	IS 16219:2014 Reviewed In : 2024	Automotive vehicles - Metallic fuel tanks - Specification
16.	IS 16332:2024	Automotive Vehicles Strength of Superstructure of Large Passenger Vehicles First Revision
17.	IS 16712:2018 Reviewed In : 2023	Automative vehicles - Spray suppression systems for two wheeled motor vehicles
18.	IS 19268:2025	Guideline Standard Microdot Systems Product Specification
19.	IS 8116:1976 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Specification for moped spokes and nipples for spokes
20.	IS 9238:1979 Reviewed In : 2017	Lateral spacing of foot controls for passenger cars