1
IS 1893 Part 2 : 2014
Criteria for Earthquake Resistant Design of Structures Part 2 Liquid Retaining Tanks
CED 39
5
Code of Practice
2
IS 13920 : 2016
Ductile Design and Detailing of Reinforced Concrete Structures Subjected to Seismic Forces - Code of Practice (First Revision)
CED 39
1
Code of Practice
3
IS 15988 : 2013
Seismic evaluation and strengthening of existing reinforced concrete buildings - Guidelines
CED 39
Others
4
IS 875 : Part 1 : 1987
Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 1 dead loads - Unit weights of building materials and stored materials (Second Revision)
CED 37
2
Code of Practice
5
IS 875 : Part 2 : 1987
Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 2 imposed loads (Second Revision)
CED 37
2
Code of Practice
6
IS 875 : Part 5 : 1987
Codb of practice for design loads (Other Than Earthquake) for buildings and structures: Part 5 special loads and load combinations (Second Revision)
CED 37
2
Code of Practice
7
IS 104 : 2017
Specification for ready mixed paint, brushing, zinc chrome, priming (Third Revision)
CHD 20
3
Product Specification
8
IS 11027 : Part 2 : 2018
Rolling Bearing - Tolerances Part 2 Meauring and Gauging Principles and Methods
PGD 13
Dimensions
9
IS 341 : 2016
Black japan, types a, b and c - Specification (Second Revision)
CHD 20
2
Product Specification
10
IS 2075 : 2017
Ready mixed paint, stoving, red oxide zinc chrome, priming - Specification (Third Revision)
CHD 20
3
Product Specification
11
IS 11057 : 1984
Specification for industrial safety nets
TXD 34
Product Specification
12
IS 12989 : 2016
Camping tents (third revision)
TXD 34
3
Product Specification
13
IS 15566 : 2005
Textiles - Caravan awnings - Functional requirements and test methods
TXD 34
Product Specification
14
IS 15852 : 2009
Textiles – Polyester blended woven shirting for uniforms
TXD 31
Product Specification
15
IS 15853 : 2009
Textiles – Polyester blended woven suiting for uniforms
TXD 31
Product Specification
16
IS 15741 : 2007
Textiles - Resistance to ignition of curtains and drapes - Specification
TXD 32
Product Specification
17
IS 15768 : 2008
Textiles – Resistance to ignition of upholstered composites used for non-domestic furniture – Specification
TXD 32
Product Specification
18
IS 15742 : 2007
Textiles - Requirements for clothing made of limited flame spread materials and material assemblies affording protection against heat and flame - Specification
TXD 32
Product Specification
19
IS 137 : 2017
Ready mixed paint, brushing, matt or eggshell flat, finishing, interior to indian standard colour as required - Specification (Second Revision)
CHD 20
2
Product Specification
20
IS 3885 : Part 1 : 1992
Steel for the manufacture of laminated springs (Railway Rolling Stock): Part 1 flat sections - Specification (Second Revision)
MTD 4
2
Product Specification
21
IS 3885 : Part 2 : 1992
Steel for the manufacture of laminated springs (Railway Rollingstock): Part 2 rib and groove sections (Second Revision)
MTD 4
2
Product Specification
22
IS 3098 : 1983
Specification for oil, hydraulic, mineral oil type (Second Revision)
PCD 25
2
Product Specification
23
IS 4578 : 1997
Lubricants - Lubricating oil for refrigeration machinery - Specification (Second Revision)
PCD 25
2
Product Specification
24
IS 8406 : 1993
Gear lubricants for enclosed industrial gear drives - Specification (Second Revision)
PCD 25
2
Product Specification
25
IS 9554 : 1980
Specifications for lubricants for open gears
PCD 25
Product Specification
26
IS 12203 : 1999
Lithium base grease for automotive purposes - Specification (First Revision)
PCD 25
1
Product Specification
27
IS 384 : 2002
Brushes, paints and varnishes, flat - Specification (Fifth Revision)
CHD 23
5
Product Specification
28
IS 1975 : 1984
Specification for signal roundels and lenses for use in railways (First Revision)
CHD 10
1
Product Specification
29
IS 5870 : 1970
Specification for glass globes for internal lighting of passenger coaches
CHD 10
Product Specification
30
IS 1838 : Part 3 : 2011
Preformed Fillers for Expansion Joints in Concrete Pavements and Structures(non-extruding and resilient type) Part 3 Polymer Based
CED 13
Product Specification
31
IS 11433 : Part 1 : 1985
Specification for one part gun-grade polysulphide- based joints sealants Part 1 General requirements
CED 13
Product Specification
32
IS 1834 : 1984
Hot Applied Sealing Compounds for Joints in Concrete- Specification
CED 13
1
Product Specification
33
IS 1838 : Part 2 : 1984
preformed fillers for expansion joint in concrete pavement and structure (non extruding and resilient type) Part 2 CNSL Aldehyde resin and coconut pith - Specification
CED 13
Product Specification
34
IS 13489 : 2000
Textiles – Bed mattress – Specification (first revision)
TXD 20
1
Product Specification
35
IS 8927 : Part 1 : 1978
Specification for haversacks – Part 1 For railway personnel
TXD 20
Product Specification
36
IS 10136 : 1982
Code of practice for selection of disc insulator fittings for highest system voltages of 72.5 kV and above
ETD 6
Code of Practice
37
IS 10314 : 1982
Dimensions for ceramic bushings for terminals
ETD 6
Dimensions
38
IS 12676 : 1989
Oil impregnated paper insulated condenser bushings - Dimensions and requirements
ETD 6
Dimensions
39
IS 13134 : 1992
Guide for the selection of insulators in respect of polluted conditions
ETD 6
Others
40
IS 13305 : 1992
Permissible limits of visual defects for insulating porcelains for electrical circuits
ETD 6
Others
41
IS 13312 : 1992
Dimensions of porcelain oil filled transformer bushings (Rated 52 KV) for medium polluted atmospheres
ETD 6
Dimensions
42
IS 1445 : 1977
Specification for porcelain insulators for overhead power lines wih a nominal voltage up to and including 1000 v (Second Revision)
ETD 6
2
Product Specification
43
IS 15137 : 2002
Metal connecting lugs for porcelain transformer bushings - Specification
ETD 6
Product Specification
44
IS 2486 : Part 1 : 1993
Metal fittings of insulators for overhead power lines with nominal voltage greater than 1000 V - Specification: Part 1 general requirements and tests (Second Revision)
ETD 6
2
Methods of tests
45
IS 2486 : Part 2 : 1989
Insulator fittings for overhead power lines with nominal voltage greater than 1000 v - Specification: Part 2 dimensional requirements (Second Revision)
ETD 6
2
Product Specification
46
IS 3347 : Part 1 : Sec 1 : 1979
Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres: Part 1 up to and including 1 Kv: Sec 1 porcelain parts (First Revision)
ETD 6
1
Dimensions
47
IS 3347 : Part 1 : Sec 2 : 1979
Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres: Part i up to and including 1 kV: Sec 2 metal parts (First Revision)
ETD 6
1
Dimensions
48
IS 3347 : Part 2 : Sec 1 : 1979
Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres: Part ii 3.6 kV bushings: Sec 1 porcelain parts (First Revision)
ETD 6
1
Dimensions
49
IS 3347 : Part 2 : Sec 2 : 1979
Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres: Part ii 3.6 kV bushings: Sec 2 metal parts (First Revision)
ETD 6
1
Dimensions
50
IS 3347 : Part 3 : Sec 1 : 1988
Dimensions for porcelain transformer bushings for use in 1 lightly polluted atmospheres: Part 3 17.5 kV bushings: Sec 1 porcelain parts (Second Revision)
ETD 6
2
Dimensions
51
IS 3347 : Part 3 : Sec 2 : 1982
Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres: Part iii 12 and 17.5 kV bushings: Sec 2 metal parts (First Revision)
ETD 6
1
Dimensions
52
IS 3347 : Part 4 : Sec 1 : 1988
Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 4 24 kv bushings: Sec 1 porcelain parts (Second Revision)
ETD 6
2
Dimensions
53
IS 3347 : Part 4 : Sec 2 : 1982
Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres: Part 4 24 kV bushings: Sec 2 metal parts (First Revision)
ETD 6
1
Dimensions
54
IS 3347 : Part 5 : Sec 1 : 1979
Dimension for porcelain transformer bushings for use in normal and lightly polluted atmospheres: Part 5 36 kV bushings: Sec 1 porcelain parts (Second Revision)
ETD 6
2
Dimensions
55
IS 3347 : Part 5 : Sec 2 : 1979
Dimensions for porcelain transformer bushings for use in normal and lightly polluted atmospheres: Part 5 36 kV bushings: Sec 2 metal parts (First Revision)
ETD 6
1
Dimensions
56
IS 3347 : Part 8 : Sec 1 : 1988
Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 8 52 kV bushings: Sec 1 porcelain part
ETD 6
Dimensions
57
IS 2486 : Part 4 : 1981
Specification for insulator fittings for overhead power lines with a nominal voltage greater than 1000 V: Part iv tests for locking devices
ETD 6
Methods of tests
58
IS 3347 : Part 8 : Sec 2 : 1992
Dtmensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 8 52 kV bushings: Sec 2 metal parts
ETD 6
Dimensions
59
IS 731 : 1971
Specification for procelain insulators for overhead power lines with a nominal voltage greater than 1000 V (Second Revision)
ETD 6
2
Product Specification
60
IS/ISO 2470 : Part 2 : 2008
Paper, board and pulps - Measurement of diffuse blue reflectance factor: Part 2 outdoor daylight conditions (D65 Brightness)
CHD 15
Methods of tests
61
IS/ISO 2471 : 2008
Paper and board - Determination of opacity (Paper Backing) - Diffuse reflectance method
CHD 15
Methods of tests
62
IS 3413 : 2004
Base paper for carbon paper - Specification (Second Revision)
CHD 15
2
Product Specification
63
IS 4318 : 1993
Solid core porcelain insulators for overhead traction lines - Specification (First Revision)
ETD 6
1
Product Specification
64
IS 10066 : 1981
Specification for corugated fibreboard boxes for packing cigarettes
CHD 16
Product Specification
65
IS 10176 : 1982
Specification for fibreboard boxes for packing of soaps
CHD 16
Product Specification
66
IS 10177 : 1982
Specification for ice cream cups and lids
CHD 16
Product Specification
67
IS 10279 : 1982
Specification for overall trimmed sizes of articles of stationery that include detachable sheets
CHD 14
Dimensions
68
IS 10328 : 1982
Method of expression of dimensions and direction of manufacture of unprocessed writing and printing paper
CHD 15
Code of Practice
69
IS 10405 : 1982
Specification for black centred board
CHD 15
Product Specification
70
IS 1060 : Part 2 : 1960
Methods of sampling and test for paper and allied products: Part 2
CHD 15
Methods of tests
71
IS 1060 : Part 3 : 1969
Methods of sampling and test for paper and allied products: Part 3
CHD 15
Methods of tests
72
IS 1064 : 1980
Specification for paper (Second Revision)
CHD 15
2
Dimensions
73
IS 11080 : 1984
Method for determination of porosity of paper
CHD 15
Methods of tests
74
IS 11087 : 1986
Specification for paper for magnetic ionk character recognition cheque printing (First Revision)
CHD 15
1
Product Specification
75
IS 11091 : 1984
Method of test for degree of curl of paper and degree of sizing
CHD 15
Methods of tests
76
IS 11324 : 1985
Specification for multy - Ply paper sacks for carbon black
CHD 16
Product Specification
77
IS 11357 : 1985
Specification for composite container for dry products
CHD 16
Product Specification
78
IS 11687 : 1986
Specification for base paper for tracing paper
CHD 15
Product Specification
79
IS 8269 : 1976
Methods for switching impulse tests on high voltage insulators
ETD 6
Methods of tests
80
IS 8603 : Part 4 : 2003
Dimensions for porcelain transformer bushings for use in heavily polluted atmospheres: Part 4 52 kV bushings
ETD 6
Dimensions
81
IS 7421 : 1988
Specification for porcelain bushings for alternating vOltages upto and including 1000 v (First Revision)
ETD 6
1
Product Specification
82
IS 11761 : 1997
Multi - Wall paper sacks for cement - Specification (First Revision)
CHD 16
1
Product Specification
83
IS 11844 : 1987
Specification for corrugated fibreboard boxes for transport packaging of apples
CHD 16
Product Specification
84
IS 12212 : 1987
Specification for corrugated fibreboard boxes for transport packaging of butter packed in primary cartons
CHD 16
Product Specification
85
IS 12490 : 1988
Specification for glassine paper
CHD 16
Product Specification
86
SP 7 : 2016
National building code of India: Part 0 integrated approach - Prerequisite for applying provisions of the code
CED 46
3
Others
87
IS 12715 : 1989
Polyvinyl alcohol for sizing of paper - Specification
CHD 15
Product Specification
88
IS 12780 : 1989
Commercial stationery forms/books - Specification
CHD 14
Product Specification
89
IS 12808 : 1989
Base paper for one - Time carbon paper - Specification
CHD 15
Product Specification
90
IS 12810 : 1989
Shorthand notebooks - Specification
CHD 14
Product Specification
91
IS 13228 : 2006
Corrugated fibreboard boxes for packing and transportation - Specification 2006 (First Revision)
CHD 16
1
Product Specification
92
IS 13892 : 1999
Correspondence Envelopes
CHD 15
1
Product Specification
93
IS 12013 : 1987
Specification for lead acid batteries for 110 volts traln lighting system with monobloc containers
ETD 11
Product Specification
94
IS 13315 : 1992
Nickel cadmium batteries for electric locomotives - Specification
ETD 11
Product Specification
95
IS 7624 : 1990
Lead - Acid starter batteries for diesel - locomotives and rail cars - Specification (First Revision)
ETD 11
1
Product Specification
96
IS 7660 : 1988
Specification for lead - Acid batteries for electric locomotives and electrical multiple units (First Revision)
ETD 11
1
Product Specification
97
IS 4257 : Part 1 : 1981
Dimensions for clamping arrangements for porcelain transformer bushings: Part 1 for 12 kV to 52 kV bushings (First Revision)
ETD 6
1
Dimensions
98
IS 7648 : 1975
Specification for silicone compounds for application on high voltage porcelain insulators
ETD 6
Product Specification
99
IS 5350 : Part 2 : 1973
Dimensions of indoor and outdoor porcelain post insulators and post insulator units for systems with nominal voltage greater than 1000 V: Part 2 outdoor cylindrical post insulators (First Revision)
ETD 6
Dimensions
100
IS 5350 : Part 3 : 1971
Dimensions of indoor and outdoor porcelain post insulators and post insulator units for systems with nominal voltages greater than 1000 V: Part 3 outdoor pedestal post insulators
ETD 6
Dimensions
101
IS 2486 : Part 3 : 1974
Specification for insulator fittings for overhead power lines with a nominal voltage greater than 1000 volts: Part 3 locking devices
ETD 6
Product Specification
102
IS 9431 : 1979
Specification for indoor post insulators of organic material for systems with nominal voltages greater than 1000 v up to and including 300 kV
ETD 6
Product Specification
103
IS 8765 : 1978
Specification for ceramic insulating materials for electrical purposes
ETD 6
Product Specification
104
IS 7935 : 1975
Specification for insulator fittings for overhead power lines with a nominal voltage up to and including 1000 v
ETD 6
Product Specification
105
IS 13975 : 1994
Axial (End - To - End) compression strength of composite cans, tubes and cores - Method of test
CHD 16
Methods of tests
106
IS 13976 : 1994
Method of end blow - Off pressure test for composite cans
CHD 16
Methods of tests
107
IS 1398 : 1982
SPECIFICATION FOR PACKING PAPER, WATER PROOF, BITUMEN-LAMINATED
CHD 16
2
Product Specification
108
IS 14319 : 1995
Laminated paper board pack for vanaspati - Specification
CHD 16
Product Specification
109
IS 14619 : 1998
Release base paper - Specification
CHD 15
Product Specification
110
IS 14661 : 1999
Toilet paper - Specification
CHD 15
Product Specification
111
IS 14915 : 2001
Filter paper, qualitative, hand - Made - Specification
CHD 15
Product Specification
112
IS 15576 : 2005
Multiwall paper sacks for tea for export - Specification
CHD 16
Product Specification
113
IS 1763 : 1961
Specification for substances of paper and pulp board
CHD 16
Others
114
IS 1775 : 1981
Specification for base paper for sensitized paper (First Revision)
CHD 15
1
Product Specification
115
IS 1776 : 1989
Folding box board, uncoated - Specification (First Revision)
CHD 16
1
Product Specification
116
IS 15307 : 2003
Post card - Specification
CHD 15
Product Specification
117
IS 2617 : 2006
Millboard, greyboard and strawboard - Specification (Second Revision)
CHD 16
2
Product Specification
118
IS 2991 : 1988
Specification for base paper for waxed paper (First Revision)
CHD 16
1
Product Specification
119
IS 3263 : 1981
Specification for waxed paper for confectionery (First Revision)
CHD 16
1
Product Specification
120
IS 3302 : 1986
Specification for backing sheet for stencil (First Revision)
CHD 15
1
Product Specification
121
IS 3303 : 1997
Match paper for match box - Specification (Second Revision)
CHD 16
2
Product Specification
122
IS 3673 : 1986
Specification for alkali resistant paper (First Revision)
CHD 15
1
Product Specification
123
IS 4664 : 1986
Specification for pulp board (First Revision)
CHD 16
1
Product Specification
124
IS 5012 : 1987
Specification for cellulose film (First Revision)
CHD 16
1
Product Specification
125
IS 6213 : Part 10 : 2014
Methods of test for pulp: Part 10 determination of kappa number (First Revision)
CHD 15
1
Methods of tests
126
IS 6213 : Part 13 : 2013
Methods of test for pulp: Part 13 determination of copper content (First Revision)
CHD 15
1
Methods of tests
127
IS 6213 : Part 15 : 2013
Methods of test for pulp: Part 15 determination of manganese content (First Revision)
CHD 15
1
Methods of tests
128
IS 6213 : Part 16 : 1978
Methods of test for pulp: Part 16 dirt count
CHD 15
Methods of tests
129
IS 6213 : Part 17 : 1978
Methods of test for pulp: Part 17 determination of saleable mass of pulp
CHD 15
Methods of tests
130
IS 6213 : Part 19 : 1985
Method of test for pulp: Part 19 determination of alkali solubility of pulp
CHD 15
Methods of tests
131
IS 6213 : Part 2 : 1971
Method - S of test for pulp: Part 2 determination of freeness of pulp
CHD 15
Methods of tests
132
IS 6213 : Part 20 : 1984
Method of test for pulp: Part 20 determination of alkali resistance of pulp
CHD 15
Methods of tests
133
IS 6213 : Part 3 : 1971
Methods of test for pulp: Part 3 determinatiqn of alpha, beta and gamma cellulose in pulp
CHD 15
Methods of tests
134
IS 6213 : Part 5 : 1971
Methods of test for pulp: Part 5 solubility of pulp in one percent caustic soda solution
CHD 15
Methods of tests
135
IS 6213 : Part 6 : 1971
Methods of test for pulp: Part 6 copper number of pulp
CHD 15
Methods of tests
136
IS 6213 : Part 1 : 1971
Methods of test for pulp: Part 1 water solubility of pulp
CHD 15
Methods of tests
137
IS 6213 : Part 12 : 2013
Methods of test for pulp: Part 12 determination of calcium content (First Revision)
CHD 15
1
Methods of tests
138
IS 6213 : Part 14 : 2013
Methods of test for pulp: Part 14 determination of iron content (First Revision)
CHD 15
1
Methods of tests
139
IS 6213 : Part 4 : 1971
Methods of test for pulp: Part 4 determination of viscosity of pulp
CHD 15
Methods of tests
140
IS 6213 : Part 9 : 1973
Methods of test for pulp: Part 9 bLeach requirements and preparation of hand sheets for optical tests of pulp
CHD 15
Methods of tests
141
IS 2771 : Part 2 : 1975
Specification for fibreboard boxes: Part 2 solid fibreboard boxes (First Revision)
CHD 16
1
Product Specification
142
IS 9894 : 1981
Method of test for smoothness/ roughness of paper
CHD 15
Methods of tests
143
IS 9042 : 1978
Method of measurement and expression of the dimensions of paper sacks
CHD 16
Methods of tests
144
IS 5285 : 1998
Fibre analysis of paper and board - Methods of test (First Revision)
CHD 15
1
Methods of tests
145
IS 5134 : 1977
Specification for bitumen impregnated paper (First Revision)
CHD 16
1
Product Specification
146
IS 6622 : 1972
Specification for grease Proof paper
CHD 16
Product Specification
147
IS 16111 : 2013
Elastic bandage
TXD 36
Product Specification
148
IS 6671 : 1987
Specification for germination paper (First Revision)
CHD 16
1
Product Specification
149
IS 6715 : 1972
Specification for master cartons for export of frozen sea foods and frog legs
CHD 16
Product Specification
150
IS 6956 : 2001
Cover paper - Specification (First Revision)
CHD 15
1
Product Specification
151
IS 7149 : 1973
Specification for fibreboard boxes for canned sea foods for export
CHD 16
Product Specification
152
IS 7151 : 1991
Corrugated fibreboard boxes for para - Dropping of supplies - specification
CHD 16
1
Product Specification
153
IS 7161 : 1973
Specification for vegetable parchment or greaseproof paper/aluminium foil laminate for wrapping butter
CHD 16
Product Specification
154
IS 7162 : 1973
Specification for waxed cartons for packaging of ice - Cream
CHD 16
Product Specification
155
IS 7601 : 1983
Specification for fibreboard drums for general purposes (First Revision)
CHD 16
1
Product Specification
156
IS 8113 : 1976
Specification for primary cartons for packaging butter
CHD 16
Product Specification
157
IS 8431 : 1986
Specification for tracing paper (First Revision)
CHD 15
1
Product Specification
158
IS 9032 : 1978
Specification for diazo sensitized paper
CHD 15
Product Specification
159
IS 9313 : 1979
Specification for corrugated fibreboard boxes for the export packaging of glass jars and bottles filled with processed foods
CHD 16
Product Specification
160
IS 9493 : 1980
Specification for cartons for non - Soapy detergents
CHD 16
Product Specification
161
IS 9588 : 1990
Kraft liner - Specification (First Revision)
CHD 16
1
Product Specification
162
IS 9988 : 1981
Specification for waxed paper for bread and biscuits
CHD 16
Product Specification
163
IS 101 : Part 1 : Sec 3 : 1986
Methods of sampling and test for paints, varnishes and related products: Part 1 Tests on liquid paints (General And Physical): Sec 3 Preparation of panels
CHD 20
3
Methods of tests
164
IS 101 : Part 1 : Sec 4 : 1987
Methods of sampling and test for paints, varnishes and related products: Part 1 Tests on liquid paints (general And physical): Sec 4 Brushing test (Third Revision)
CHD 20
3
Methods of tests
165
IS 101 : Part 1 : Sec 6 : 1987
Methods of sampling and test for paints, varnishes and related products: Part 1 Tests on liquid paints (general and physical): Sec 6 Flash point (Third Revision)
CHD 20
3
Methods of tests
166
IS 11883 : 2017
Ready mixed paint, brushing, red oxide, priming for metals specification (First Revision)
CHD 20
1
Product Specification
167
IS 13213 : 2018
Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)
CHD 20
1
Product Specification
168
IS 101 : Part 2 : Sec 2 : 1986
Methods of sampling and test for paints, varnishes and related products: Part 2 Test on liquid paints (chemical examination): Sec 2 Volatile matter (Third Revision)
CHD 20
3
Methods of tests
169
IS 101 : Part 3 : Sec 1 : 1986
Methods of sampling and test for paints, varnishes and related products: Part 3 Tests on paint film formation: Sec 1 Drying time (Third Revision)
CHD 20
3
Methods of tests
170
IS 101 : Part 3 : Sec 2 : 1989
Methods of sampling and tes for paints,varnishes and related products: Part 3 Tests on paint film formation: Sec 2 Film thickness (Third Revision)
CHD 20
3
Methods of tests
171
IS 101 : Part 3 : Sec 4 : 1987
Methods of sampling and test for paints, varnishes and related products: Part 3 Tests on paint film formation: Sec 4 Finish (Third Revision)
CHD 20
3
Methods of tests
172
IS 101 : Part 4 : Sec 1 : 1988
Methods of sampling and test for paints, varnishes and related products: Part 4 Optical test: Sec 1 Opacity (Third Revision)
CHD 20
3
Methods of tests
173
IS 101 : Part 5 : Sec 1 : 1988
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical test on paint films: Sec 1 Hardness tests (Third Revision)
CHD 20
3
Methods of tests
174
IS 101 : Part 5 : Sec 2 : 1988
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 2 Flexibility and adhesion (Third Revision)
CHD 20
3
Methods of tests
175
IS 101 : Part 5 : Sec 4 : 1988
Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 4 Print free test (Third Revision)
CHD 20
3
Methods of tests
176
IS 101 : Part 6 : Sec 1 : 1988
Methods of sampling and test for paints, varnishes and related products: Part 6 Durability tests: Sec 1 Resistance to humidity under conditions of condensation (Third Revision)
CHD 20
3
Methods of tests
177
IS 101 : Part 6 : Sec 2 : 1989
Methods of sampling and test for varnishes and related products: Part 6 Durability test on paint films: Sec 2 Keeping properties (Third Revision)
CHD 20
3
Methods of tests
178
IS 101 : Part 6 : Sec 3 : 1990
Methods of sampling and test for paints, varnishes and related products: Part 6 Durability tests on paint films: Sec 3 Moisture vapour permeability (Third Revision)
CHD 20
3
Methods of tests
179
IS 101 : Part 6 : Sec 4 : 1991
Methods of sampling and test for paints, varnishes and related products Part 6 Durability tests on paint films Sec 4 Degradation of coatings (pictorial aids for evaluation) (Third Revision)
CHD 20
Methods of tests
180
IS 101 : Part 6 : Sec 5 : 1997
Method of sampling and test for paints, varnishes and related products: Part 6 Durability test on Paint films: Sec 5 Accelerated weathering test
CHD 20
Methods of tests
181
IS 101 : Part 7 : Sec 1 : 1989
Methodsof sampling and test for paints, varnishes and related produdTs: Part 7 Environmental tests on paint films: Sec 1 Resistance to water (Third Revision)
CHD 20
3
Methods of tests
182
IS 101 : Part 7 : Sec 2 : 1990
Methods of sampling and test for paints,varnishes and related products: Part 7 Environmental tests on paint films: Sec 2 Resistance to liquids (Third Revision)
CHD 20
3
Methods of tests
183
IS 101 : Part 7 : Sec 4 : 1990
Methods of sampling and test for paints, varnishes and related products: Part 7 Environmental tests on paint films: Sec 4 Resistance to bleeding of pigments (Third Revision)
CHD 20
3
Methods of tests
184
IS 101 : Part 8 : Sec 1 : 1989
Methods of sampling and test for paints, varnishes and related products: Part 8 Tests for pigments and other solids: Sec 1 Residue on sieve (Third Revision)
CHD 20
3
Methods of tests
185
IS 101 : Part 8 : Sec 2 : 1990
Methods of sampling and test for paints, varnishes and related products: Part 8 Tests for pigments and other solids: Sec 2 Pigments and non - volatile matter (Third Revision)
CHD 20
3
Methods of tests
186
IS 101 : Part 8 : Sec 3 : 1993
Methods of sampling and test for paints, varnishes and related products: Part 8 Tests for pigments and other solids: Sec 3 Ash content (Third Revision)
CHD 20
Methods of tests
187
IS 101 : Part 8 : Sec 4 : 2015
Methods of sampling and test for paints, varnishes and related products: Part 8 Tests for pigments and other solids: Sec 4 Phthalic anhydride (Fourth Revision)
CHD 20
4
Methods of tests
188
IS 101 : Part 8 : Sec 6 : 1993
Methods of sampling and test for paints,varnishes and related products: Part 8 Tests for pigments and other solids: Sec 6 Volume solids
CHD 20
Methods of tests
189
IS 101 : Part 9 : Sec 1 : 1993
Methods of sampling and test for paints, varnishes and related products: Part 9 Tests for lacquers and varnish: Sec 1 Acid value (Third Revision)
CHD 20
3
Methods of tests
190
IS 101 : Part 9 : Sec 2 : 1993
Methods of sampling and test for paints, varnishes and products: Part 9 Tests for lacquers and varnish: Sec 2 Rosin test (Third Revision)
CHD 20
3
Methods of tests
191
IS 6947 : Part 1 : 1973
Methods of estimation of composite pigments in oil pastes and ready mixed paints: Part 1 estimation of lead, zinc oxide, titanium dioxide, calcium compounds and zinc sulphide
CHD 20
Methods of tests
192
IS 6947 : Part 3 : 1975
Methods of estimation of composite pigments in oil pastes, ready mixed paints and enamels: Part 3 estimation of lead chromes, iron blues and zinc compounds
CHD 20
Methods of tests
193
IS 6947 : Part 2 : 1975
Methods of estimation of composite pigments in oil pastes, ready mixed paints and enamels: Part 2 estimation of zinc chromes, ferric oxide and aluminium
CHD 20
Methods of tests
194
IS 1303 : 1983
Glossary of terms relating to paints (Second Revision)
CHD 20
2
Terminology
195
IS 14314 : 1995
Thinner, general purpose, for synthetic paints and varnishes - Specification
CHD 20
Product Specification
196
IS 15489 : 2013
Paint, plastic emulsion - Specification (First Revision)
CHD 20
1
Product Specification
197
IS 1128 : 1974
Specification for limestone (Slab And Tiles)
CED 6
1
Product Specification
198
IS 1130 : 1969
Marble (blocks, Slabs And Tiles)
CED 6
Product Specification
199
IS 3620 : 1979
Laterite Stone Block For Masonry
CED 6
1
Product Specification
200
IS 427 : 2013
Distemper, dry, colour as required - Specification (Third Revision)
CHD 20
3
Product Specification
201
IS 428 : 2013
Washable distemper - Specification (Third Revision)
CHD 20
3
Product Specification
202
IS 5410 : 2013
Cement paint - Specification (Second Revision)
CHD 20
2
Product Specification
203
IS 12744 : 2013
Ready mixed paint, air drying, red oxide - Zinc phosphate, priming - Specification (First Revision)
CHD 20
1
Product Specification
204
IS 2932 : Part 1 : 2013
Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)
CHD 20
4
Product Specification
205
IS 2933 : Part 1 : 2013
Enamel, exterior: (A) undercoating (B) finishing - Specification: Part 1 for domestic and decorative applications (Second Revision)
CHD 20
2
Product Specification
206
IS 13183 : 1991
Aluminium paint, heat resistant - Specification
CHD 20
Product Specification
207
IS 13184 : 1991
Mastic filler, epoxy based - Specification
CHD 20
Product Specification
208
IS 13239 : 2016
Epoxy surfacer (Two Pack) - Specification (First Revision)
CHD 20
1
Product Specification
209
IS 13607 : 1992
Heady mixed paint, finishing, general purposes, synthetic - Specification
CHD 20
Product Specification
210
IS 10753 : 1983
Code of practice for preservation of wooden sleepers for railway track by pressure treatment
CED 9
Code of Practice
211
IS 757 : 1971
Specification for handloom cotton lint, absorbent, bleached, non-sterilized (first revision)
TXD 36
1
Product Specification
212
IS 1097 : 1979
Specification for handloom cotton mosquito netting (first revision)
TXD 32
1
Product Specification
213
IS 10054 : 1996
Textiles – High density polyethylene (HDPE) monofilament mosquito netting, round mesh – Specification (first revision)
TXD 32
1
Product Specification
214
IS 13798 : 1993
Polyurethane base knifing filler (Two Pack) for exterior painting of railway coaches - Specification
CHD 20
Product Specification
215
IS 13799 : 2016
Polyurethane Base Surfacer (Two Pack) for Exterior Painting of Railway Coaches - Specification
CHD 20
1
Product Specification
216
IS 140 : 2015
Ready mixed paint, exterior, petrol resisting, air drying - Specification (Second Revision)
CHD 20
2
Product Specification
217
IS 1419 : 1989
Antifouling paint, brushing, for ships bottom and hulls - Specification (Second Revision)
CHD 20
2
Product Specification
218
IS 14209 : 2016
Epoxy enamel, two component, glossy - Specification (First Revision)
CHD 20
1
Product Specification
219
IS 144 : 1950
Specification for ready mixed paint, brushing, petrol resisting, air - Drying, for interior painting of tanks and container & red oxide (Colour Unspecified)
CHD 20
Product Specification
220
IS 145 : 1950
Specification for ready mixed paint, slushing, petrol resisting, air - Drying, for interior painting of tanks and - Containers, red oxide, (Colour Unspecified)
CHD 20
Product Specification
221
IS 14506 : 1998
Epoxy redoxide zinc phosphate weldable primer,two component - Specification
CHD 20
Product Specification
222
IS 14589 : 1999
Zinc priming paint, epoxy based, two - Pack - Specification
CHD 20
Product Specification
223
IS 146 : 1950
Specification for ready mixed paint, brushing, petrol resisting, stoving, for interior painting of tanks and containers, red oxide (Colour Unspecified)
CHD 20
Product Specification
224
IS 147 : 1950
Specification for ready mixed paint, slushing, petrol resisting, stoving for interior painting of tanks and containers, red oxide (Colour Unspecified)
CHD 20
Product Specification
225
IS 16478 : Part 1 : 2019
Plain bearing - Metallic multilayer plain bearings: Part 1 non - Destructive ultrasonic testing of bond of thickness greater than or equal to 0.5 mm
PGD 13
Methods of tests
226
IS 142 : 2017
Specification for ready mixed paint, exterior, petrol resisting, stoving (Second Revision)
CHD 20
2
Product Specification
227
IS 16478 : Part 2 : 2019
Plain bearing - Metallic multilayer plain bearings: Part 2 destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm
PGD 13
Methods of tests
228
IS 1681 : 1998
Textiles – Hospital blankets, woollen, dyed – Specification (third revision)
TXD 36
3
Product Specification
229
IS 1893 : 1984
CRITERIA FOR EARTHQUAKE RESISTANT DESIGN OF STRUCTURES (Fourth Revision)
CED 39
Code of Practice
230
IS 3179 : 1990
Engineering metrology - Feeler gauges (second revision)
PGD 25
2
Product Specification
231
IS 1779 : 1961
Specification for 4 - Metre, levelling staff, folding type
PGD 22
Product Specification
232
IS 1957 : 1961
Specification for prismatic compasses, non - Liquid
PGD 22
Product Specification
233
IS 109 : 2017
Specification for ready mixed paint, finishing, priming, plaster, to indian standard colour no. 361 light stone and no. 631 light grey, white and off - White (Second Revision)
CHD 20
2
Product Specification
234
IS 110 : 2017
Ready mixed paint, brushing, grey filler, for enamels for use over primers - Specification (Third Revision)
CHD 20
3
Product Specification
235
IS 3537 : 2017
Ready mixed paint, finishing, interior, for general purposes, to indian standard colours - Specification (First Revision)
CHD 20
1
Product Specification
236
IS 3585 : 2018
Ready mixed paint, aluminium, brushing, priming, water resistant for woodwork - Specification (First Revision)
CHD 20
1
Product Specification
237
IS 9387 : Part 1 : 2018
Specification for taper male stud elbow body for oil - Hydraulic c0upling: Part 1 made from forgings zyxw
PGD 36
1
Product Specification
238
IS 9387 : Part 2 : 2018
Specification for taper male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock
PGD 36
1
Product Specification
239
IS 9388 : Part 1 : 1979
Specification for equal elbow body for oil - Hydraulic couplings: Part 1 made from forgings
PGD 36
Product Specification
240
IS 9389 : Part 1 : 2018
Specification for - Equal tee - Body for oil - Hydraulic couplins: Part 1 tee body made from forgings
PGD 36
1
Product Specification
241
IS 9389 : Part 2 : 2018
Specification for equal tee body for oil - Hydraulic couplings: Part 2 made from bar stock
PGD 36
1
Product Specification
242
IS 9390 : 2018
Specification for straight coupling body for oil - Hydraulic couplings
PGD 36
1
Product Specification
243
IS 9388 : Part 2 : 2019
Equal elbow body for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision)
PGD 36
1
Product Specification
244
IS 5 : 2007
Colours for ready mixed paints and enamels (Sixth Revision)
CHD 20
6
Code of Practice
245
IS 814 : 2004
Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)
MTD 11
6
Product Specification
246
IS 1179 : 1967
Specification for equipment for eye and face protection during welding (First Revision)
MTD 11
1
Product Specification
247
IS 1278 : 1972
Specification for filler rods and wires for gas welding (Second Revision)
MTD 11
2
Product Specification
248
IS 1395 : 1982
Specification for low and medium alloy steel covered electrodes for manual metal arc welding (Third Revision
MTD 11
3
Product Specification
249
IS 5511 : 1991
Covered electrodes for manual metal arc welding of cast iron - Specification (First Revision)
MTD 11
1
Product Specification
250
IS 5206 : 1983
Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision)
MTD 11
1
Product Specification
251
IS 5857 : 1970
Specification for nickel and nickel alloy bare solid welding rods and electrodes
MTD 11
Product Specification
252
IS 5897 : 1985
Specification for aluminium and aluminium alloy welding rods and wires and magnesium alloy welding rods (First Revision)
MTD 11
1
Product Specification
253
IS 6016 : 2009
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes (Second Revision)
MTD 11
2
Product Specification
254
IS 6419 : 1996
Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)
MTD 11
1
Product Specification
255
IS 7303 : 1974
Specification for covered electrodes for surfacing of metal by manual metal arc welding
MTD 11
Product Specification
256
IS 7653 : 1975
Specification for manual blow pipes for welding and cutting
MTD 11
Product Specification
257
IS 8363 : 1976
Specification for bare wire electrodes for electroslag welding of steels
MTD 11
Product Specification
258
IS 8484 : 1998
Metal powders for welding electrodes - Specification (First Revision)
MTD 11
1
Product Specification
259
IS 8666 : 1977
Specification for copper and copper alloy covered electrodes for manual metal arc welding
MTD 11
Product Specification
260
IS 8736 : 1977
Specification for nickel and nickel alloy covered electrodes for metal arc welding
MTD 11
Product Specification
261
IS 15769 : 2008
Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel
MTD 11
Product Specification
262
IS 2609 : 1972
Specification for coach bolts (First Revision)
PGD 37
1
Product Specification
263
IS 3195 : 1992
Steel for the manufacture of volute and helical springs (For Railway Rolling Stock) - Specification (Third Revision)
MTD 4
3
Product Specification
264
IS 150 : 1950
Specification for ready mixed paint, brushing, finishing, stoving, enamel, colour as required
CHD 20
Product Specification
265
IS 158 : 2015
Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)
CHD 20
4
Product Specification
266
IS 159 : 1981
Specification for ready mixed paint, brushing, acid resisting (First Revision)
CHD 20
1
Product Specification
267
IS 168 : 2016
Ready mixed paint, air drying for general purpose - Specification (Fourth Revision)
CHD 20
4
Product Specification
268
IS 337 : 1975
Specification for varnish, finishing, interior (First Revision)
CHD 20
1
Product Specification
269
IS 430 : 1972
Specification for paint remover, solvent type, non - Flammable (Second Revision)
CHD 20
2
Product Specification
270
IS 431 : 1972
Specification for paint remover, solvent type, flammable (Second Revision)
CHD 20
2
Product Specification
271
IS 524 : 1983
Specification for varnish, finishing, exterior, synthetic, air - drying (Second Revision)
CHD 20
2
Product Specification
272
IS 525 : 1968
Specification for varnish, finishing, exterior and general purposes (First Revision)
CHD 20
1
Product Specification
273
IS 3266 : 1982
Specification for - Electroplated coatings of gold for general engineering purpose (First Revision)
MTD 24
1
Product Specification
274
IS 4736 : 1986
Specification for hot - Dip zinc coatings on mild steel tubes (Fist Revision)
MTD 24
1
Product Specification
275
IS 4759 : 1996
Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)
MTD 24
3
Product Specification
276
IS 1992 : 1979
Specification for electroplated coatings of lead (First Revision)
MTD 24
1
Product Specification
277
IS 2601 : 1987
Specification for brass anodes for electroplating (First Revision)
MTD 24
1
Product Specification
278
IS 6697 : 1988
Hot - Dip aluminium coatings on ferrous parts (Other Than Sheet, Strip And Wire) for general purposes - Specification (First Revision)
MTD 24
1
Product Specification
279
IS 1771 : 1986
Specification for electroplated coatings of silver and silver alloys for general engineering purposes (Second Revision)
MTD 24
2
Product Specification
280
IS 1985 : Part 1 : 1980
Recommended practice for preparation of iron and steel for electroplating: Part 1 high carbon steel (First Revision)
MTD 24
1
Code of Practice
281
IS 2606 : 1987
Specification for alloy lead anodes for chromium plating (Second Revision)
MTD 24
2
Product Specification
282
IS 1985 : Part 3 : 1980
Recommended practice for preparation of iron and steel for electroplating: Part 3 iron castings (First Revision)
MTD 24
1
Product Specification
283
IS 6057 : 1988
Specification for hard anodic coatings on aluminium and aluminium alloys (First Revision)
MTD 24
1
Product Specification
284
IS 5905 : 1989
Sprayed aluminium and zinc coatings on iron and steel - Specification (First Revision)
MTD 24
1
Product Specification
285
IS 13094 : 2021
Selection of ground improvement techniques for foundation in weak soils - Guidelines (first revision)
CED 43
1
Code of Practice
286
IS 1458 : 1965
Railway Bronze Ingots And Casting (First Revision)
MTD 8
Product Specification
287
IS 5300 : 1969
Specification for porcelain guy strain insulators
ETD 6
Product Specification
288
IS 3539 : 1966
Specification for ready mixed paint, undercoating, for use under oil finishes, to indian standard colours, as required
CHD 20
Product Specification
289
IS 3678 : 2016
Ready mixed paint, thick white, for lettering - Specification (First Revision)
CHD 20
1
Product Specification
290
IS 3709 : 1966
Specification for mastic cement for bedding of metal windows
CHD 20
Product Specification
291
IS 5666 : 1970
Specification for etch (Pretreatment) primer
CHD 20
Product Specification
292
IS 5667 : 1970
Specification for thinner for cellulose nitrate based paints and lacquers
CHD 20
Product Specification
293
IS 6125 : 2017
Enamel, synthetic, stoving, for automobiles - Specification (First Revision)
CHD 20
1
Product Specification
294
IS 6126 : 1971
Specification for nitrocellulose surfacer
CHD 20
Product Specification
295
IS 6714 : 1989
Ready mixed paint, finishing, non - Slip, deck - Specification (First Revision)
CHD 20
1
Product Specification
296
IS 7164 : 1973
Specification for stopper
CHD 20
Product Specification
297
IS 5691 : 1970
Specification for lacquer, cellulose nitrate, pigmented, finishing, glossy
CHD 20
Product Specification
298
IS 9862 : 2017
Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)
CHD 20
1
Product Specification
299
IS 14946 : 2001
Zinc ethyl silicate primer, two components - Specification
CHD 20
Product Specification
300
IS 14947 : 2001
Enamel synthetic, oil resistant, air drying - Specification
CHD 20
Product Specification
301
IS 14948 : 2001
Paint coal tar epoxy, two pack, black and brown (Base And Hardner) - Specification
CHD 20
Product Specification
302
IS 1893 : Part 3 : 2014
Criteria for Earthquake Resistant Design of Structures Part 3 Bridges and Retaining Walls
CED 39
Code of Practice
303
IS 1060 : Part 4 : Sec 1 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 1 standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
CHD 15
Methods of tests
304
IS 1060 : Part 4 : Sec 4 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 4 measurement of diffuse radiance factor
CHD 15
Methods of tests
305
IS 1060 : Part 4 : Sec 8 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 8 determination of water soluble chlorides
CHD 15
Methods of tests
306
IS 1060 : Part 4 : Sec 9 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 9 determination of water soluble sulfates
CHD 15
Methods of tests
307
IS 1060 : Part 4 : Sec 10 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 10 determination of total chlorine and organically bound chlorine
CHD 15
Methods of tests
308
IS 1060 : Part 4 : Sec 11 : 2014
Methods of sampling and test for paper and allied products: Part 4 methods of test for paper, board and pulp: Sec 11 determination of acid soluble magnesium, calcium, manganese, iron, copper, sodium and potassium
CHD 15
Methods of tests
309
IS 1060 : Part 5 : Sec 1 : 2014
Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 1 sampling to determine average quality
CHD 15
Methods of tests
310
IS 1060 : Part 5 : Sec 3 : 2014
Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 3 determination of thickness, density and specific volume
CHD 15
Methods of tests
311
IS 1060 : Part 5 : Sec 4 : 2014
Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 4 determination of water absorptiveness - Cobb method
CHD 15
Methods of tests
312
IS 1060 : Part 5 : Sec 6 : 2014
Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 6 determination of tensile properties - Constant rate of elongation method (20 Mm/min)
CHD 15
Methods of tests
313
IS 1060 : Part 5 : Sec 9 : 2014
Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 9 determination of resistance to picking - Accelerated speed method using the igt - Type tester (Electric Model)
CHD 15
Methods of tests
314
IS 1060 : Part 5 : Sec 14 : 2014
Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 14 determination of air permeance and air resistance (Medium Range) - Gurley method
CHD 15
Methods of tests
315
IS 1060 : Part 5 : Sec 18 : 2014
Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 18 determination of cie whiteness, D65/10° (Outdoor Daylight)
CHD 15
Methods of tests
316
IS 1060 : Part 6 : Sec 1 : 2014
Methods of sampling and test for paper and allied products: Part 6 methods of test for paper: Sec 1 determination of tearing resistance - Elmendorf method
CHD 15
Methods of tests
317
IS 1060 : Part 7 : Sec 1 : 2014
Methods of sampling and test for paper and allied products: Part 7 methods of test for board: Sec 1 determination of bursting strength of board
CHD 15
Methods of tests
318
IS 6213 : Part 8 : Sec 2 : 2014
Methods of test for pulp: Part 8 preparation of laboratory sheets for physical testing: Sec 2 rapid - Köthen method
CHD 15
Methods of tests
319
IS 423 : 1961
Specification for Plastic wood for joiners filler (Revised)
CHD 20
Product Specification
320
IS 6667 : 1972
Glossary of terms used in synthetic resin industry
CHD 20
Terminology
321
IS 3443 : 1980
Crane Rail Sections -
CED 7
1
Product Specification
322
IS 1060 : Part 5 : Sec 16 : 2015
Methods of sampling and test for paper and allied products: Part 5 methods of test for paper and board: Sec 16 determination of capillary rise - Klemm method
CHD 15
Methods of tests
323
IS 1060 : Part 6 : Sec 3 : 2015
Methods of sampling and test for paper and allied products: Part 6 methods of test for paper and board: Sec 3 determination of folding endurance of paper
CHD 15
Methods of tests
324
IS 16377 : 2017
Synchronous belt drives - Automotive pulleys
PGD 40
Product Specification
325
IS 3536 : 2016
Ready mixed paint, brushing, wood primer - Specification (Second Revision)
CHD 20
2
Product Specification
326
IS 8263 : 2018
Radio interference test on high - Voltage insulators (First Revision)
ETD 6
1
Methods of tests
327
IS 101 : Part 2 : Sec 1 : 2018
Methods of sampling and test for paints, varnishes and related products: Part 2 Test on liquid paints (chemical examination): Sec 1 Water content (Fourth Revision)
CHD 20
4
Methods of tests
328
IS 13405 : 2018
Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions (Second Revision)
PGD 13
2
Dimensions
329
IS/ISO/TS 22163 : 2017
Railway Applications — Quality Management System — Business Management System Requirements for Rail Organizations: ISO 9001 : 2015 and Particular Requirements for Application in the Rail Sector
MSD 2
System Standard
330
IS 16605 : Part 2 : 2018
Rolling Bearings — Accessories Part 2 Dimensions for Locknuts and Locking Devices
PGD 13
Dimensions
331
IS 17483 : Part 1 : 2020
Geosynthetics - Geocells - Specification (Part 1) Load Bearing Application
TXD 30
Product Specification