Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 8130:2013

IS Title/आईएस शीर्षक : Conductors for insulated electric cables and flexible cords - Specification (Second Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Modified/Technically Equivalent

Number of Revisions/पुनरीक्षणों की संख्या : 2

Number of Amendments/संशोधनों की संख्या : 2

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : ETD (Electrotechnical Department)

Technical Committee/तकनीकी समिति : ETD 09 (Power Cables Sectional Committee)

Member Secretary/सदस्य सचिव : EMMANUEL ABHISHEK MURMU (SCIENTIST-D)

Other Details

Indian Standard

Click to download

Amendment : 2

Click to download

Gazette Document : 2

Click to download

License : 0

Product Manual & SIT : 1

Click to download

Laboratory : 1

Click to view

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 8130:2013
:

1	IS 613:2000	Copper rods and bars for electrical purposes - Specification (Third Revision)	MTD 08
2	IS 1885 (Part 32):2019 IEC 60050-461 : 2008	Electrotechnical Vocabulary Part 32 Electric Cables ( Second Revision )	ETD 01
3	IS 10810 (Part 1):1984	Methods of test for cables: Part 1 annealing test for wires used as conductors	ETD 09
4	IS 10810 (Part 2):1984	Methods of test for cables: Part 2 tensile test for aluminium wires	ETD 09
5	IS 10810 (Part 3):1984	Methods of test for cables: Part 3 wrapping test for aluminium wires	ETD 09
6	IS 10810 (Part 4):1984	Methods of test for cables: Part 4 persulphate test of conductor	ETD 09
7	IS 10810 (Part 5):1984	Methods of test for cables: Part 5 conductor resistance test	ETD 09

International Standards Referred In IS 8130:2013

Standard contains no Cross Referenced International Standard.

IS 8130:2013
is Referred in following Indian Standards :

1	IS 3938 : 1983	Specification for electric wire rope hoists (Second Revision)	MED 14
2	IS 4137 : 2015	Heavy duty electric overhead travelling cranes including special service machines for use in steel work - Code of practice (Second Revision)	MED 14
3	IS 5608 : Part 1 : 1991	Specification for low - Frequency cables and wires with PVC insulation and PVC sheath: Part 1 general requirements, test and measuring methods (First Revision)	LITD 06
4	IS 5608 : Part 4 : 2000	Specification for low frequency wires and cables with PVC insulation and PVC sheath: Part 4 cables for indoor installations (First Revision)	LITD 06
5	IS 5662 : 1991	Specification for TV aerial feeder cables (First Revision)	LITD 06
6	IS/IEC 60947 : PART 1 : 2007	Low - Voltage switchgear and controlgear: Part 1 general rules (First Revision)	ETD 07
7	IS/IEC 61058 : PART 1 : 2000	Switches for appliances: Part 1 general requirements	ETD 14
8	IS 13573 : Part 1 : 2011	Cable accessories for extruded power cables - Specification: Part 1 for working voltages from 1.1 kV up to and including 3.3 kV (E) - Test methods and test requirements (First Revision)	ETD 09
9	IS 13573 : Part 3 : 2011	Cable accessories for extruded power cables - Specification: Part 3 for working voltages from 3.3 kV (UE) up to and including 33 KV (E) - Test methods (First Revision)	ETD 09
10	IS 14255 : 1995	Aerial bunched cables - For working voltages up to and including 1 100 Volts - Specification	ETD 09
11	IS 4289 : Part 2 : 2000	Flexible cables for lifts and other flexible connections - Specification: Part 2 pvc insulated circular cables	ETD 09
12	IS 692 : 1994	Paper insulated lead sheathed cables for rated voltage up to and including 33 kV - Specification (Third Revision)	ETD 09
13	IS 7098 : Part 2 : 2011	Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)	ETD 09
14	IS 7098 : Part 3 : 1993	Cross - Linked polyethylene insulated thermoplastic sheathed cables - Specification: Part 3 for working voltages from 66 kV up to and including 220 kV	ETD 09
15	IS 9857 : 1990	Welding cables - Specification (First Revision)	ETD 09
16	IS 9968 : Part 2 : 2002	Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision)	ETD 09
17	IS 10241 : Part 2 : 1982	Specification for electrical cables for aircraft: Part 2 pren type electric cables	TED 14
18	IS 10241 : Part 3 : 1987	Specification for electric cables for aircraft: Part 3 nyvin type electric cables	TED 14
19	IS 8572 : 1993	Paper - Covered flexible/stranded copper conductors for transformer leads - Specification (First Revision)	ETD 33
20	IS 17048 : 2018	Halogen free flame retardant (HFFR) cables for working voltages up to and including 1 100 Volts - Specification	ETD 09
21	IS 14494 : 2019	Elastomer insulated flexible cables for use in mines - Specification (First Revision)	ETD 09
22	IS 732 : 2019	Code of practice for electrical wiring installations (Fourth Revision)	ETD 20
23	IS 17121 : 2019	General requirements for arc fault detection devices	ETD 07
24	IS 16781 : 2018	Connectors for d.c. Application in Photovoltaic Systems Safety Requirements and Tests	ETD 28
25	IS/ISO 20816 (Part 2) : 2017	Mechanical Vibration â€” Measurement and Evaluation of Machine Vibration Part 2 Land-Based Gas Turbines, Steam Turbines and Generators in Excess of 40 MW, with Fluid-Film Bearings and Rated Speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min ( First Revision ) Amendment - 1	MED 28
26	IS 16997 : 2018	Requirements for Low-Voltage Special Electrical Installations or Locations Solar Photovoltaic ( PV ) Power Supply Systems	ETD 20
27	IS 17017 : Part 2 : Sec 1 : 2020	Electric Vehicle Conductive Charging System Part 2 Plugs, Socket-Outlets, Vehicle Connectors, and Vehicle Inlets Section 1 General requirements	ETD 51
28	IS 17017 : Part 2 : Sec 3 : 2020	Electric Vehicle Conductive Charging System Part 2 Plugs, Socket - Outlets, Vehicle Connectors and Vehicle Inlets Section 3 Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers	ETD 51
29	IS 17293 : 2020	Electric Cables for Photovoltaic Systems for Rated Voltage 1 500 V d.c.	ETD 09
30	IS 2508 : 1984	Low Density Polyethylene Films	PCD 12
31	IS 4582 : 2021	Textiles Womens Cardigan Knitted Specification Second Revision	TXD 10
32	IS/IEC 60079 : PART 7 : 2015	Explosive atmospheres: Part 7 equipment protection by increased safety "E" (First Revision)	ETD 22
33	IS/ISO 105 : Part N05 : 1993	Textiles Tests for colour fastness Part N05: Colour fastness to stoving	TXD 05
34	IS 14927 : Part 2 : 2001	Cable Trunking and Ducting Systems for Electrical Installations : Part 2 Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling	ETD 14
35	IS 8859 : 1978	Specification for cast copper tuyere	MTD 08
36	IS 12640 : Part 1 : 2016	Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses (Rccbs): Part 1 general rules (Second Revision)	ETD 07
37	IS 5459 : 2023	BASEBALL SPECIFICATION	PGD 41
38	IS 13450 : Part 2 : Sec 19 : 2023	Medical Electrical Equipment Part 2 Particular Requirements for the Basic Safety and Essential Performance Section 19 Infant Incubators First Revision	MHD 15
39	IS 14434 : 2023	Polycarbonate moulding and extrusion materials - Specification (First Revision)	PCD 12
40	IS 18182 : 2023	Management of Assets in Drinking Water Supply System - Guidelines	EED 04
41	IS 18182 : 2023	Management of Assets in Drinking Water Supply System - Guidelines	EED 04
42	IS 18182 : 2023	Management of Assets in Drinking Water Supply System - Guidelines	EED 04
43	IS 18182 : 2023	Management of Assets in Drinking Water Supply System - Guidelines	EED 04
44	IS 18182 : 2023	Management of Assets in Drinking Water Supply System - Guidelines	EED 04
45	IS 7098 : Part 1 : 1988	Specification for crosslinked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1 100 volts (First Revision)	ETD 09
46	IS/IEC 62548 : 2016	Photovoltaic (PV) Arrays - Design Requirements	ETD 28

Classification Details

Certification	:
Group	:	Electrical Switchgear and Other Electrical Products/Accessories
Sub Group	:	Cables, Conductors, Wires and Accessories
Sub Sub Group	:	Power cables
Aspect	:	Product Specification

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 2

Gazette Document : 2

License : 0

Product Manual & SIT : 1

Laboratory : 1

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details