Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 5613 (Part 3/Sec 1):2024

IS Title/आईएस शीर्षक : Design, Installation and Maintenance for Overhead Power Lines ï¿½ Code of Practice Part 3 400 kV and 765 kV Lines Section 1 Design ( First Revision )

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 1

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Code of Practice

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : ETD (Electrotechnical Department)

Technical Committee/तकनीकी समिति : ETD 37 (Conductors And Accessories For Overhead Lines Sectional Committee)

Member Secretary/सदस्य सचिव : Mr Ritanshu Dhiman (SCIENTIST-B)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 4

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 5613 (Part 3/Sec 1):2024
:

1	IS 398 (Part 5):1992	Aluminium conductor for overhead transmission purposes - Specification: Part 5 aluminium conductors - Galvanized steel - Reinforced for extra high voltage (400 KV And Above) (First Revision)	ETD 37
2	IS 456:2000	Plain and reinforced concrete - Code of practice (Fourth Revision)	CED 02
3	IS 731:1971	Specification for procelain insulators for overhead power lines with a nominal voltage greater than 1 000 V (Second Revision)	ETD 06
4	IS 1573:1986	Specification for electroplated coatings of zinc on iron and steel (Second Revision)	MTD 24
5	IS 1885 (Part 30):2023 IEC 60050-601: 1985	Electrotechnical vocabulary: Part 30 overhead transmission and distribution of electrical energy	ETD 01
6	IS 2121 (Part 1):1981	Specification for conductors and earth wire accessories for overhead power lines: Part 1 armour rods, binding wires and tapes for conductors (First Revision)	ETD 37
7	IS 2121 (Part 4):1991	Conductors and earthwire accessories for overhead lines: Part 4 non - Tension joints - Specification	ETD 37
8	IS/ISO/IEC 14443-1:2022 14443-1:2018	Insulation Coordination Part 1 Definition Principles And Rules (First Revision)	ETD 19
9	IS/ISO/IEC 15693-2:2022 ISO/IEC 15693-2:2019	Insulation Coordination Part 2: Application Guide (First Revision)	ETD 19
10	IS 2551:1982	Danger notice plates (First Revision)	ETD 20
11	IS 2633:1986	Method for testing uniformity of coating on zinc coated articles (Second Revision)	MTD 24
12	IS 3043:2018	Code of practice for earthing (Second Revision)	ETD 20
13	IS/IEC 60471:2020	Dimensions of Clevis and Tongue Couplings of String Insulator Units	ETD 06
14	IS 802 (Part 1/Sec 1):2015	Use of structural steel in overhead transmission line towers - Code of practice: Part 1 materials, loads and design strengths: sec 1 materials and loads (Fourth Revision)	CED 07
15	IS 802 (Part 1/Sec 2):2016	Use of Structural Steel in Overhead Transmission Line Towers - Code of Practice: Part 1 Material, Loads and Design Strengths: Sec 2 Design Strengths (Fourth Revision)	CED 07
16	IS 802 (Part 2):1978	Code of practice for use of structural steel in overhead transmission line towers: Part 2 fabrication galvanizing, inspection and packing	CED 07
17	IS 802 (Part 3):1978	Code of Practice for Use of Structural Steel In Overhead Transmission Line Towers, Part 3 Testing	CED 07
18	IS 1367 (Part 13):2020 ISO 10684 : 2004	Technical Supply Conditions for Threaded Steel Fasteners Part 13 Hot Dip Galvanized Coatings on Threaded Fasteners ( Third Revision )	PGD 37
19	IS 4091:1979	Code of practice for design and construction of foundations for transmission line towers and poles (First Revision)	CED 43
20	IS 4759:1996	Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision)	MTD 24
21	IS 5613 (Part 1/Sec 1):1985 Reaffirmed but not taken up for revision	Code of practice for design, installation and maintenance of overhead power lines: Part 1 lines up to and including 11 kV Sec 1 design (First Revision)	ETD 37
22	IS 5613 (Part 2/Sec 1):1985 Reaffirmed but not taken up for revision	Code of practice or design, installation and maintenance of overhead power lines: Part 2 lines above 11 kv and up to and including 220 kv sec 1 design (First Revision)	ETD 37
23	IS 5613 (Part 2/Sec 2):1985 Reaffirmed but not taken up for revision	Code of practice for design, installation and maintenance of overhead power lines: Part 2 lines above 11 kV and up to and including 220 Kv: Sec 2 installation and maintenance (First Revision)	ETD 37
24	IS 10162:1982	Specification for spacers and spacer dampers for twin horizontal bundle conductors	ETD 37
25	IS 12776:2002	Galvanized strand for earthing - Specification (First Revision)	MED 10
26	IS 12360:2026	Voltage bands for electrical installations including preferred voltages and frequency	ETD 01
27	IS 2486 (Part 4):1981	Specification for insulator fittings for overhead power lines with a nominal voltage greater than 1 000 V: Part 4 tests for locking devices	ETD 06
28	IS 16784:2026	Insulators for Overhead Lines - Composite Suspension and Tension Insulators for a.c. Systems with a Nominal Voltage Greater Than 1 000 V - Definitions, Test Methods and Acceptance Criteria	ETD 06
29	IS/IEC 60383-1:2023	Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 1 Ceramic or Glass Insulator Units for a.c. Systems â€” Definitions, Test Methods and Acceptance Criteria	ETD 06
30	IS/IEC 60383-2:1993	Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V: Part 2 Insulator Strings and Insulator Sets for a.c. Systems - Definitions, Test Methods and Acceptance Criteria	ETD 06
31	IS 2121 (Part 2):1981	Specification for conductors and earth wire accessories for overhead power lines: Part 2 mid - Spain joints and repair sleeves - For conductors (First Revision)	ETD 37
32	IS 1570 (Part 1):1978 Decision taken to Reaffirm and Archive	Schedules for wrought steels: Part 1 steels specifed by tensile and/or yield properties (First Revision)	MTD 16
33	:
34	IS 1570 (Part 3):1979 Decision taken to Reaffirm and Archive	Schedules for wrought steels: Part 3 carbon and carbon - Manganese free cutting steels (First Revision)	MTD 16
35	IS 1570 (Part 4):1988	Schedules for wrought steels: Part 4 alloy steels (Alloy Constructional And Spring Steels) with specified chemical composition andd mechanical properties (First Revision)	MTD 16
36	IS 1570 (Part 5):1985	Schedules for wrought steels: Part 5 stainless and heat - Resisting steels (Secoind Revision)	MTD 16
37	IS 1570 (Part 6):1996	Schedules for wrought steels: Part 6 carbon and alloy tool steels (First Revision)	MTD 16
38	IS 1570 (Part 7):1992 Decision taken to Reaffirm and Archive	Schedule for wrought steels: Part 7 steels for elevated temperature service (Creep Resistant Steels)	MTD 16
39	IS 1570 (Part 2/Sec 1):1979	Schedules for wrought steels: Part 2 carbon steels (Unalloyed Steels): Sec 1 wrought products (Other Than Wires) with specified chemical composition and related properties (First Revision)	MTD 16
40	IS 1570 (Part 2/Sec 2):1987 Decision taken to Reaffirm and Archive	Schedules for wrought fteels: Part 2 carbon steels (Unalloyed Steels): Sec 2 carbon steel wires with related properties (First Revision)	MTD 16

International Standards Referred In IS 5613 (Part 3/Sec 1):2024

Standard contains no Cross Referenced International Standard.

IS 5613 (Part 3/Sec 1):2024
is Referred in following Indian Standards :

1	IS 16596 : 2021	Information and documentation -- International Standard Recording Code ISRC First Revision	MSD 05

Classification Details

Certification	:
Group	:	Electrical Switchgear and Other Electrical Products/Accessories
Sub Group	:	Electrical installations and general electricals
Sub Sub Group	:	National Electrical Code
Aspect	:	Code of Practice

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 4

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details