Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 10322 (Part 1):2014

IS Title/आईएस शीर्षक : Luminaires: Part 1 general requirements and tests (First Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Modified/Technically Equivalent

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : 1

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : ETD (Electrotechnical Department)

Technical Committee/तकनीकी समिति : ETD 49 (Illumination Engineering and Luminiaries Sectional Committee)

Member Secretary/सदस्य सचिव : JAINENDRA KUMAR (SCIENTIST-D)

Other Details

Indian Standard

Click to download

Amendment : 1

Click to download

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 1

Click to view

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 10322 (Part 1):2014
:

1	IS 616:2017 IEC 60065 : 2014	Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)	LITD 07
2	IS 694:2010	Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1 100 V (Fourth Revision)	ETD 09
3	IS 1271:2012 IEC 60085	Electrical insulation - Thermal evaluation and designation (Second Revision)	ETD 02
4	IS 1293:2019 IEC 60884-1	Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)	ETD 14
5	IS 1401:2008 IEC 61032 Reaffirmed but not taken up for revision	Protection of persons and equipment by enclosures - Probes for verification (Second Revision)	ETD 32
6	IS 1416:1972	Specification for safety transformers (First Revision)	ETD 32
7	IS 2824:2007 IEC 60112 : 2003	Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Second Revision)	ETD 02
8	IS 3010 (Part 1):1965	Specification for appliance - connectors and appliance - Inlets (Non - Reversible Three - Pin Type): Part 1 appliance - Connectors	ETD 14
9	IS 3010 (Part 2):1965	Specification for appliance - Connectors and appliance - Inlets (Non - Reversible Three - Pin Type): Part 2 appliance - inlets	ETD 14
10	IS 3323:1980 Reviewed In : 2017 Reaffirmed but not taken up for revision	Specification for bi-pin landholders for tubular fluorescent lamps (First Revision)	ETD 14
11	IS 5921 (Part 1):1993 IEC 249-1	Metal-clad base materials for printed circuits for use in electronic and telecommunication equipment: Part 1 General requirements and test	LITD 05
12	IS 6616:1982 IEC 262	Ballasts for high pressure mercury vapour lamps	ETD 23
13	IS 7809 (Part 3/Sec 5):1977	Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 specifications for individual materials: Sec 5 cellulosic paper with thermosetting adhesive	ETD 02
14	IS 7809 (Part 3/Sec 4):1977	Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 specifications for individual materials: Sec 4 cellulosic paper, creped with thermosetting adhesive	ETD 02
15	IS 7809 (Part 3/Sec 3):1981	Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 specification for individual materials: Sec 3 polyster film tapes (PETP) with non - Thermosetting adhesive	ETD 02
16	IS 7809 (Part 3/Sec 2):1981	Specification for pressure sensitive adhesive tapes for electrical purposes: Part 3 Specifications for individual materials: Sec 2 Polyester film tapes (PETP) with thermosetting adhesive	ETD 02
17	IS 7809 (Part 3/Sec 1):1986 IEC 60454-2	Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision)	ETD 02
18	IS 7809 (Part 2):1977 IEC 60454-2	Specification for pressure sensitive adhesive tapes for electrical purpose : Part 2 methods of test	ETD 02
19	IS 7809 (Part 1):1975 IEC 60454-1	Specification for pressure sensitive adhesive tapes for electrical purposes: Part 1 general requirements	ETD 02
20	IS 8913:2025 IEC 60360: 1998	Method of measurement of lamp cap temperature rise	ETD 23
21	IS 9000 (Part 7/Sec 15):1979	Basic environmental testing procedures for electronic and electrical items: Part 7 impact test	LITD 01
22	IS 9968 (Part 1):2025	Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision)	ETD 09
23	IS 9974 (Part 1):1981 IEC 662 Reviewed In : 2024 Reaffirmed but not taken up for revision	Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests	ETD 23
24	IS 9974 (Part 2):1981 IEC 662 Reviewed In : 2024 Reaffirmed but not taken up for revision	Specification for high pressure sodium vapour lamps: Part 2 standard lamp data sheets	ETD 23
25	IS 10276 (Part 2):1982	Specification for edison screw lampholders: Part 2 standard data sheets for lampholders and gauges	ETD 14
26	IS 10322 (Part 5/Sec 4):2026	Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires	ETD 49
27	IS 11000 (Part 2/Sec 2):2008 IEC 60695-11-5: 2004	Fire hazard testing: Part 2 test methods: Sec 2 needle - Flame test method - Apparatus, cofirmatory test arrangement and guidance (First Revision)	LITD 01
28	IS 11000 (Part 2/Sec 1):2018 IEC 60695-2-10 : 2013	Fire hazard testing: Part 2 test methods: Sec 1 glow - Wire apparatus and common test procedure (Second Revision)	LITD 01
29	IS 11654 (Part 3/Sec 407):1989	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 407 glass textile sleeving with pvc based coating - Medium breakdown strength	ETD 02
30	IS 11654 (Part 3/Sec 406):1989	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 406 glass textile sleeving with pvc based coating - High breakdown strength	ETD 02
31	IS 11654 (Part 3/Sec 405):1989	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 405 glass textile sleeving with acrylic based coating - Lower breakdown strength	ETD 02
32	IS 11654 (Part 3/Sec 404):1989	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 404 glass textile sleeving with acrylic based coating - Medium breakdown strength	ETD 02
33	IS 11654 (Part 3/Sec 403):1989	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 403 glass textile sleeving with acrylic based coating - High breakdown strength	ETD 02
34	IS 11654 (Part 3/Sec 103):1989	Specification for flexible insulating sleevings: Part 3 specifications for individual types of sleevings: Sec 103 general purpose - Grade sleeving with unilateral tolerances with temperature index 90	ETD 02
35	IS 11654 (Part 3/Sec 1):1988	Specification for flexible insulating sleeving: Part 3 specifications for individual types of sleevings: Sec 1 general purpose grade sleeving with temperature index 90	ETD 02
36	IS 11654 (Part 2):2024 IEC 60684-2:2011	Specification for flexible insulating sleeving: Part 2 methods of test	ETD 02
37	IS 11654 (Part 1):2024 IEC 60667-1:2020	Specification for flexible insulating sleeving: Part 1 definitions and general requirements	ETD 02
38	IS 12063:1987	Classification of Degrees of Protection Provided by Enclosures of Electrical Equipment	ETD 01
39	IS 15382 (Part 1):2022 60664-1:2020	Insulation coordination for equipment within low - Voltage systems: Part 1 principles, requirements and tests (First Revision)	ETD 19
40	IS 15382 (Part 3):2019 IEC 60664-3 : 2016	Insulation Coordination for Equipment within Low-Voltage Systems Part 3 Use of Coating, Potting or Moulding for Protection against Pollution (First Revision)	ETD 19
41	IS 12948:1990 Reviewed In : 2024 Reaffirmed but not taken up for revision	Tungsten halogen lamps (Non - Vehicle) - Specification	ETD 23
42	SP 30:2023	National electrical code 2011 (First Revision)	ETD 20
43	IS/QC 302400:1994	Fixed capacitors for use in electronic equipment: Sectional specification for fixed capacitors for electromagnetic interference suppression and connection to the supply mains	LITD 05

International Standards Referred In IS 10322 (Part 1):2014

1	ISO 75 : 1987

IS 10322 (Part 1):2014
is Referred in following Indian Standards :

1	IS 12274 : 1987	Safety requirements for electronic flash apparatus for photographic purposes	LITD 07
2	SP 7 : Group 1 : 2005	National Building Code--Of India 2005 Group 1	CED 46
3	IS/IEC 60079 : Part 15 : 2010	Explosive atmospheres: Part 15 equipment protection by type of protection "N" (First Revision)	ETD 22
4	IS 13021 : Part 1 : 1991	AC supplied electronic ballasts for tubular fluorescent lamps - Specification: Part 1 general and safety requirements	ETD 23
5	IS 15967 : Part 1 : 2013	Capacitors for use in tubular fluorescent and other discharge lamp circuits: Part 1 safety requirements	ETD 23
6	IS 15974 : 2013	Auxiliaries for lamps starting devices (Other Than Glow Starters) - Performance requirements	ETD 23
7	IS 16102 : Part 1 : 2012	Self - Ballasted led lamps for general lighting services: Part 1 safety requirements	ETD 23
8	IS 10322 : Part 4 : 1984	Luminaires - Part 4 : Methods of Tests	ETD 23
9	IS 16107 : Part 1 : 2012	Luminaires performance: Part 1 general requirements	ETD 49
10	IS 16107 : Part 2 : Sec 1 : 2012	Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire	ETD 49
11	IS 10322 : Part 5 : Sec 1 : 2012	Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision)	ETD 49
12	IS 10322 : Part 5 : Sec 2 : 2012	Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision)	ETD 49
13	IS 10322 : PART 5 : SEC 3 : 2012	Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)	ETD 49
14	IS 10322 : Part 5 : Sec 5 : 2013	Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision)	ETD 49
15	IS 10322 : Part 5 : Sec 6 : 2013	Luminaires: Part 5 particular requirements: Sec 6 handlamps	ETD 49
16	IS 10322 : Part 5 : Sec 7 : 2017	Luminaires: Part 5 particular requirements: Sec 7 lighting chains (First Revision)	ETD 49
17	IS 10322 : Part 5 : Sec 8 : 2013	Luminaires: Part 5 particular requirements: Sec 8 emergency lighting	ETD 49
18	IS 15885 : PART 1 : 2011	Safety of lamp controlgear: Part 1 general requirements	ETD 23
19	IS 15885 : PART 2 : SEC 1 : 2011	Safety of lamp control gear: Part 2 particular requirements: Sec 1 starting devices (Other Than Glow Starters)	ETD 23
20	IS 732 : 2019	Code of practice for electrical wiring installations (Fourth Revision)	ETD 20
21	IS/IEC 61730 : PART 2 : 2016	Photovoltaic (PV) module safety qualification: Part 2 requirements for testing (First Revision)	ETD 28
22	IS 6873 : Part 5 : 2019	Limits and Methods of Measurement of Radio Disturbance Characteristics Part 5 Electrical Lighting and Similar Equipment ( Third Revision )	LITD 09
23	IS 2418 : Part 1 : 2018	Tubular fluorescent lamps for general lighting service: Part 1 safety requirements (Second Revision)	ETD 23
24	IS 2418 : Part 2 : 2018	Tubular fluorescent lamps for general lighting service: Part 2 performance requirements (Second Revision)	ETD 23
25	IS 16614 : Part 1 : 2018	Double- Capped LED Linear Lamps Part1 Safety Specification	ETD 23
26	IS 13450 : Part 2 : Sec 22 : 2021	Medical electrical equipment Part 2 Particular requirements for basic safety and essential performance Section 22 surgical cosmetic therapeutic and diagnostic laser equipment First Revision	MHD 15
27	IS/IEC 60079 : PART 7 : 2015	Explosive atmospheres: Part 7 equipment protection by increased safety "E" (First Revision)	ETD 22
28	IS 1258 : 2005	Bayonet lamp holders (Fourth Revision)	ETD 14
29	IS 10276 : Part 1 : 1982	Specification for edison screw lamp holders: Part 1 requirements and tests	ETD 14
30	IS 302 : Part 1 : 2008	Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)	ETD 32
31	IS 3025 : Part 16 : 2023	Methods of Sampling and Test Physical And Chemical for Water and Waste Water Part 16 Filterable Residue Total Dissolved Solids at 180 C Second Revision	CHD 36
32	IS 18253 : 2023	Ready Dosa Batter - Specification	FAD 16
33	IS 9968 : Part 1 : 1988	Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision)	ETD 09

Classification Details

Certification	:
Group	:	Electrical Appliances and Accessories
Sub Group	:	Lamps, Luminaire and Accessories
Sub Sub Group	:	Luminaires & lighting
Aspect	:	Product Specification

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 1

Gazette Document : 0

License : 0

Product Manual & SIT : 0

Laboratory : 1

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details