Programme of work

  1. Home
  2. Programme of work

BUREAU OF INDIAN STANDARDS


Textiles Department

Programme of Work




TXD14 : Textile Machinery and Accessories


  • Scope : To formulate Indian Standards for terminology and specifications for components and accessories of dyeing, finishing and allied machinery.
  • Liaison :
    ISO/TC 72 - Textile machinery and accessories - Participating (P)
    ISO/TC 72/SC 1 - Spinning preparatory, spinning, twisting and winding machinery and accessories - Participating (P)
    ISO/TC 72/SC 3 - Machinery for fabric manufacturing including preparatory machinery and accessories - Participating (P)
    ISO/TC 72/SC 4 - Dyeing and finishing machinery and accessories - Participating (P)
    ISO/TC 72/SC 8 - Safety requirements for textile machinery - Observer (O)

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
 IS 10310:1982
Reviewed In : 2023
Nomenclature for formers for yarn packages
November, 2023
-
Indigenous
2.
 IS 10347:1982
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for serrated bars for mechanlcal warp stop motions
March, 2019
-
Indigenous
3.
 IS/ISO 1036:1984
ISO 1036:1984
Reviewed In : 2021
Textile machinery and accessories - Dyeing and finishing machines - Definition of left and right sides
June, 2021
-
Identical under single numbering
4.
 IS 10509:1983
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for dead spindles used on jute spinning frames
March, 2019
-
Indigenous
5.
 IS 10598:2023
TEXTILES GUIDE ROLLERS FOR DYEING AND FINISHING MACHINERY SPECIFICATION (Second Revision)
-
Indigenous
6.
 IS 10795:2024
TEXTILES ACCESSORIES FOR USE IN SHUTTLES FOR PIRN-CHANGING AUTOMATIC COTTON LOOMS SPECIFICATION First Revision of IS 10795
-
Indigenous
7.
 IS 10948:1984
ISO 570
Reviewed In : 2024
Dimensions of heald carrying rods for healds with closed `O' shaped end loops
April, 2024
-
Identical under dual numbering
8.
 IS 11059:2022
Textile machinery and accessories Cylindrical tubes for open-end spinning Specification first revision
-
Indigenous
9.
 IS 11200:1985
Reviewed In : 2024
Terminology for open-end spinning
March, 2024
1
Indigenous
10.
 IS 11508:2023
TEXTILES FALLER BARS FOR JUTE DRAWING FRAMES SPECIFICATION First Revision of IS 11508
-
Indigenous
11.
 IS 11510:2024
TEXTILES SPINDLE FOR JUTE COP WINDING MACHINE SPECIFICATION First Revision of IS 11510
-
Indigenous
12.
 IS 11511:1985
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for bobbin carrier for jute spinning frame
November, 2019
1
Indigenous
13.
 IS 11512:2023
TEXTILES FALLER SCREWS FOR JUTE DRAWING FRAMES SPECIFICATION First Revision of IS 11512
-
Indigenous
14.
 IS/ISO 11676:2014
ISO 11676 : 2014
Reviewed In : 2023
Textile Machinery and Accessories - Pattern Disks and Pattern Chains for Warp Knitting Machines - Vocabulary and Symbols
September, 2023
-
Identical under dual numbering
15.
 IS 11819:2020
ISO 7839 : 2005
Reviewed In : 2025
Textile machinery and accessories – Knitting machines – Vocabulary and classification (first revision)
March, 2025
-
Identical under dual numbering
16.
 IS 1186:1971
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for shuttles for hessian and Sacking looms (first revision)
March, 2019
-
Indigenous
17.
 IS 11872 (Part 2):1987
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for rollers for drawing and spinning frames in jute mill
March, 2019
1
Indigenous
18.
 IS 11872 (Part 12):1987
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for rollers for drawing and spinning frames in jute mill
March, 2019
-
Indigenous
19.
 IS 11898:1986
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for faller bar slides for jute drawing frames
March, 2019
1
Indigenous
20.
 IS 11899:1986
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for flyers for jute spinning frames
March, 2019
1
Indigenous
21.
 IS 1190:2023
TEXTILES � TWIN WIRE HEALDS FOR WEAVING � SPECIFICATION (Fourth Revision)
-
Indigenous
22.
 IS 11933:2023
TEXTILES 4B PLASTIC PICKERS SPECIFICATION First Revision of IS 11933
-
Indigenous
23.
 IS 1225:2023
TEXTILES LEATHER PICKING BANDS FOR LOOMS SPECIFICATION (Second Revision)
-
Indigenous
24.
 IS 12297:1988
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for delivery roller boss for jute drawing frame
March, 2019
-
Indigenous
25.
 IS 12298:1988
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for wooden card staves set with pins for cylindrical drum rollers of jute carding machine
March, 2019
-
Indigenous
26.
 IS 12307:1988
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for delivery pressing roller boss for jute drawing frame
March, 2019
-
Indigenous
27.
 IS 12318:2023
TEXTILES PICKING CONE AND PICKING STUD FOR JUTE LOOMS SPECIFICATION
-
Indigenous
28.
 IS 12339:2023
TEXTILES CRANK SHAFT FOR JUTE LOOMS SPECIFICATION
-
Indigenous
29.
 IS 12385:2007
ISO 8117
Reviewed In : 2021
Textiles machinery – Knitting machines – Nominal diameters of circular machines (first revision)
June, 2021
-
Identical under dual numbering
30.
 IS 12414:1988
Reviewed In : 2024
Pitches of knitting machine needles
March, 2024
-
Indigenous
31.
 IS 12885:2023
TEXTILES PRESSING ROLLER ASSEMBLY FOR JUTE DRAWING FRAME SPECIFICATION First Revision of IS 12885
-
Indigenous
32.
 IS 12886:2023
TEXTILES HEART CAM FOR JUTE SPINNING FRAME SPECIFICATION First Revision of IS 12886
-
Indigenous
33.
 IS 12890:2024
TEXTILES BOBBIN RAIL FOR JUTE SPINNING FRAMES SPECIFICATION First Revision of IS 12890
-
Indigenous
34.
 IS 12910:2023
TEXTILES MACHINERY REED GUIDE FOR SELECTION First Revision of IS 12910
-
Indigenous
35.
 IS/ISO 12912:2014
ISO 12912 : 2014
Reviewed In : 2023
Circular Knitting Machines - Vocabulary
September, 2023
-
Identical under dual numbering
36.
 IS 13221:2023
TEXTILES CAMS FALLER SCREW FOR SCREW GILL JUTE DRAWING FRAME SPECIFICATION First Revision of IS 13221
-
Indigenous
37.
 IS 13560:2024
TEXTILES - DRUM PULLEYS/TR PULLEYS USED IN RING SPINNING AND DOUBLING FRAMES- SPECIFICATION (First Revision)
-
Indigenous
38.
 IS 13561:2024
TEXTILES - EAR-SHAPED NYLON TRAVELLERS FOR RING DOUBLING AND TWISTING - SPECIFICATION (First Revision)
-
Indigenous
39.
 IS 13628:1992
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery - Squeezing rollers for textile finishing machines - Specification
March, 2019
-
Indigenous
40.
 IS 13629:2004
Reviewed In : 2024
Textile machinery – Stainless steel drying cylinders used in textile processing – Specification (first revision)
March, 2024
-
Indigenous
41.
 IS 13682:1993
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery and accessories - Bobbin rail pin and plate for jute spinning frame - Specification
March, 2019
-
Indigenous
42.
 IS 13720:1993
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery and accessories - Pressing roller assembly for jute spinning frame - Specification
March, 2019
-
Indigenous
43.
 IS 13721:1993
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery and accessories - Bobbin rail boss for jute spinning frame - Specification
March, 2019
-
Indigenous
44.
 IS 13747:1993
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery – Hand-operated, single bed type, domestic knitting machines – Specification
March, 2019
-
Indigenous
45.
 IS 13748:1993
Reviewed In : 2024
Textile machinery and accessories - Chain links for warp knitting machines - Terms and definitions, symbols
March, 2024
-
Indigenous
46.
 IS 13865 (Part 1):1994
ISO 5238-1
Reviewed In : 2021
Textile machinery and accessories – Packages of yarns and intermediate products – Part 1 Terminology
June, 2021
-
Identical under dual numbering
47.
 IS 13866:1994
ISO 5239
Reviewed In : 2024
Textile machinery and accessories - Winding - Basic terms
April, 2024
-
Identical under dual numbering
48.
 IS 13879:2018
ISO 5243 : 2004
Reviewed In : 2022
Textile machinery and accessories - Numbering of heald frames and drop wire bars in a loom (first revision)
August, 2022
-
Identical under dual numbering
49.
 IS 14192:2020
ISO 8121 : 2007
Reviewed In : 2025
Textile machinery – Knitting machines – Nameplate information (first revision)
March, 2025
-
Identical under dual numbering
50.
 IS 14456:2020
ISO 11675 : 2005
Reviewed In : 2025
Textile machinery and accessories – Flatbed knitting machines – Vocabulary (first revision)
March, 2025
-
Identical under dual numbering
51.
 IS 14457:2007
ISO 8122
Reviewed In : 2022
Textiles machinery – Knitting machines – Number of needles for circular knitting machines of large nominal diameter (first revision)
February, 2022
-
Identical under dual numbering
52.
 IS 14675:1999
Reviewed In : 2019
Reaffirmed but not taken up for revision
Bottom drafting rollers for CHARKHAS – Specification
November, 2019
-
Indigenous
53.
 IS 14676:1999
Reviewed In : 2019
Reaffirmed but not taken up for revision
Spinning rings used in CHARKHAS – Specification
November, 2019
-
Indigenous
54.
 IS 14677:2023
TEXTILES SPINDLES WITH BOLSTERS FOR CHARKHAS SPECIFICATION First Revision of IS 14677
-
Indigenous
55.
 IS 14711:1999
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery and accessories – Frame components of CHARKHAS – Specification
November, 2019
-
Indigenous
56.
 IS 14783 (Part 1):2000
Reviewed In : 2024
Textiles machinery and accessories - Cylindrical sliver cans: Part 1 specification
November, 2024
-
Indigenous
57.
 IS 14783 (Part 2):2014
ISO 93-1
Reviewed In : 2023
Textile machinery and accessories – Cylindrical sliver cans – Part 2 Main dimensions (first revision)
November, 2023
-
Identical under dual numbering
58.
 IS 14783 (Part 3):2014
ISO 93-2
Reviewed In : 2023
Textile machinery and accessories – Cylindrical sliver cans – Part 3 Spring bottoms (first revision)
November, 2023
-
Identical under dual numbering
59.
 IS 15258:2002
Reviewed In : 2022
Textile machinery – Man-made fibre processing machinery – Classification and nomenclature
February, 2022
-
Indigenous
60.
 IS 15260:2022
ISO 9947 : 2005
Textile machinery and accessories Two-for-one twisters Vocabulary first revision
-
Identical under dual numbering
61.
 IS 15378:2003
ISO 3914-7
Reviewed In : 2023
Textile machinery and accessories – Cylindrical tubes – Dimensions, tolerances and designation of perforated tubes for cheese dyeing
November, 2023
-
Identical under dual numbering
62.
 IS 15379:2003
ISO 9904
Reviewed In : 2023
Textile machinery and accessories - Steel pins for spinning preparatory and spinning machinery
November, 2023
-
Identical under dual numbering
63.
 IS 15383:2003
ISO 8489-4
Reviewed In : 2023
Textile machinery and accessories – Cones for cross winding – Dimensions, tolerances and designation of cones with half angle 40 2’ for winding for dyeing purposes
November, 2023
-
Identical under dual numbering
64.
 IS 15384:2003
ISO 8116-9
Reviewed In : 2023
Textile machinery and accessories - Beams for winding - Dyeing beams for textile fabrics
November, 2023
-
Identical under dual numbering
65.
 IS 15412:2003
Reviewed In : 2024
Textile machinery – Ceramic thread guides for man-made fibre processing machines – Specification
March, 2024
-
Indigenous
66.
 IS 15513 (Part 1):2004
Reviewed In : 2023
Textile machinery and accessories – Heald frames – Part 1 Heald-carrying rod fixed to the frame stave by rod support – Coordinated dimensions
November, 2023
-
Identical under dual numbering
67.
 IS 15513 (Part 2):2004
Reviewed In : 2023
Textile machinery and accessories – Heald frames – Part 2 Heald-carrying road fixed directly on the frame stave – Coordinated dimensions
November, 2023
-
Identical under dual numbering
68.
 IS 15513 (Part 3):2004
Reviewed In : 2023
Textile machinery and accessories – Heald frames – Part 3 Guides for heald frames
November, 2023
-
Identical under single numbering
69.
 IS 1552:2025
TEXTILES - PITCH-BOUND WIRE REEDS FOR JUTE LOOMS - SPECIFICATION (Third Revision)
-
Indigenous
70.
 IS 1552:1978
Reviewed In : 2023
Specification for pitch-bound wire reeds for jute looms (second revision)
November, 2023
-
Indigenous
71.
 IS 15760 (Part 1):2007
ISO 11677-1
Reviewed In : 2022
Textiles machinery and accessories – Main dimensions of flat steel healds with open end loops – Part 1 C-shaped end loops
February, 2022
-
Identical under dual numbering
72.
 IS 15760 (Part 2):2007
ISO 11677-2
Reviewed In : 2021
Textiles machinery and accessories – Main dimensions of flat steel healds with open end loops – Part 2 J-shaped end loops
June, 2021
-
Identical under dual numbering
73.
 IS 15761 (Part 1):2020
ISO 96-1 : 2016
Reviewed In : 2025
Textiles machinery and accessories – Rings and travellers for ring spinning and ring twisting frames – Part 1 Flange rings T and SF and their travellers (second revision)
March, 2025
-
Identical under dual numbering
74.
 IS 15761 (Part 2):2014
ISO 96-2
Reviewed In : 2023
Textile machinery and accessories – Rings and travellers for ring spinning and ring twisting frames – Part 2 HZ- and J-rings and their travellers (first revision)
November, 2023
-
Identical under dual numbering
75.
 IS 1619:2023
TEXTILES BUFFER BAND FOR COP-CHANGING AUTOMATIC LOOMS SPECIFICATION (Second Revision)
-
Indigenous
76.
 IS 16582 (Part 1):2020
ISO 8116-1 : 1995
Reviewed In : 2025
Textile machinery and accessories – Beams for winding Part 1 General vocabulary
March, 2025
-
Identical under dual numbering
77.
 IS 16582 (Part 2):2018
ISO 8116-2 : 2008
Reviewed In : 2022
Textile machinery and accessories – Beams for winding Part 2 Warper’s beams
August, 2022
-
Identical under dual numbering
78.
 IS 16582 (Part 3):2018
ISO 8116-3 : 2008
Reviewed In : 2022
Textile machinery and accessories – Beams for winding Part 3 Weaver’s beams
August, 2022
-
Identical under dual numbering
79.
 IS 16582 (Part 4):2018
ISO 8116-4 : 2008
Reviewed In : 2022
Textile machinery and accessories – Beams for winding Part 4 Test methods and quality classification of flanges for weaver’s beams, warper’s beams and sectional beams
August, 2022
-
Identical under dual numbering
80.
 IS 16582 (Part 5):2018
ISO 8116-5 : 2008
Reviewed In : 2022
Textile machinery and accessories – Beams for winding Part 5 Sectional beams for warp knitting machines
August, 2022
-
Identical under dual numbering
81.
 IS 17361 (Part 1):2020
ISO 11111-1 : 2016
Reviewed In : 2025
Textile machinery – Safety requirements Part 1 Common requirements
March, 2025
-
Identical under dual numbering
82.
 IS 17361 (Part 2):2020
ISO 11111-2 : 2005
Reviewed In : 2025
Textile Machinery - Safety Requirements Part 2 Spinning Preparatory and Spinning Machines
March, 2025
-
Identical under dual numbering
83.
 IS 17361 (Part 3):2020
ISO 11111-3 : 2005
Reviewed In : 2025
Textile Machinery - Safety Requirements Part 3 Nonwoven Machinery
March, 2025
-
Identical under dual numbering
84.
 IS 17361 (Part 4):2020
ISO 11111-4 : 2005
Reviewed In : 2025
Textile Machinery - Safety Requirements Part 4 Yarn Processing, Cordage and Rope Manufacturing Machinery
March, 2025
-
Identical under dual numbering
85.
 IS 17361 (Part 5):2020
ISO 11111-5 : 2005
Reviewed In : 2025
Textile Machinery - Safety Requirements Part 5 Preparatory Machinery to Weaving and Knitting
March, 2025
-
Identical under dual numbering
86.
 IS 17361 (Part 6):2020
ISO 11111-6 : 2005
Reviewed In : 2025
Textile machinery – Safety requirements Part 6 Fabric manufacturing machinery
March, 2025
-
Identical under dual numbering
87.
 IS 17361 (Part 7):2020
ISO 11111-7 : 2005
Reviewed In : 2025
Textile Machinery - Safety Requirements Part 7 Dyeing and Finishing Machinery
March, 2025
-
Identical under dual numbering
88.
 IS 17362 (Part 1):2020
ISO 9902-1 : 2001
Reviewed In : 2025
Textile machinery – Noise test code Part 1 Common requirements
March, 2025
-
Identical under dual numbering
89.
 IS 17362 (Part 2):2020
ISO 9902- 2 : 2001
Reviewed In : 2025
Textile machinery – Noise test code Part 2 Spinning preparatory and spinning machinery
March, 2025
1
Identical under dual numbering
90.
 IS 17362 (Part 3):2020
ISO 9902-3 : 2001
Reviewed In : 2025
Textile machinery – Noise test code Part 3 Nonwoven machinery
March, 2025
1
Identical under dual numbering
91.
 IS 17362 (Part 4):2020
ISO 9902-4 : 2001
Reviewed In : 2025
Textile machinery – Noise test code Part 4 Yarn processing, cordage and rope manufacturing machinery
March, 2025
1
Identical under dual numbering
92.
 IS 17362 (Part 5):2020
ISO 9902-5 : 2001
Reviewed In : 2025
Textile Machinery - Noise Test Code Part 5 Weaving and Knitting Preparatory Machinery
March, 2025
-
Identical under dual numbering
93.
 IS 17362 (Part 6):2020
ISO 9902-6 : 2018
Reviewed In : 2025
Textile machinery – Noise test code Part 6 Fabric manufacturing machinery
March, 2025
-
Identical under dual numbering
94.
 IS 17362 (Part 7):2020
ISO 9902-7 : 2001
Reviewed In : 2025
Textile Machinery - Noise Test Code Part 7 Dyeing and Finishing Machinery
March, 2025
-
Identical under dual numbering
95.
 IS 17364:2020
ISO 20727 : 2004
Reviewed In : 2025
Textile machinery – Mixing bale openers for cotton spinning – Vocabulary and principles of construction
March, 2025
-
Identical under dual numbering
96.
 IS 17366:2020
ISO 20725 : 2004
Reviewed In : 2025
Textile machinery – Condensers for cotton spinning – Vocabulary and principles of construction
March, 2025
-
Identical under dual numbering
97.
 IS 17367:2020
ISO 20726 : 2004
Reviewed In : 2025
Textile machinery – Hopper feeders for cotton spinning – Vocabulary and principles of construction
March, 2025
-
Identical under dual numbering
98.
 IS 1737:2023
TEXTILE SPRING BUFFERS FOR COTTON LOOMS SPECIFICATION (Second Revision)
-
Indigenous
99.
 IS 17454:2023
TEXTILES GENERAL REQUIREMENT FOR SANITARY NAPKIN VENDING MACHINE SPECIFICATION
-
Indigenous
100.
 IS 17455:2020
ISO 23771 : 2015
Reviewed In : 2025
Textile Machinery - Guide to the Design of Textile Machinery for Reduction of the Noise Emissions
March, 2025
-
Identical under dual numbering
101.
 IS 17865:2022
ISO 16875 : 2004
Textile machinery Ring spinning machines for cotton spinning Vocabulary
-
Identical under dual numbering
102.
 IS 17866:2022
ISO 13435 : 2011
Textile machinery and accessories Bars for drop wires for electrical warp stop motions
-
Identical under dual numbering
103.
 IS 17867 (Part 1):2022
ISO 13990-1 : 2006
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 1: Vocabulary
-
Identical under dual numbering
104.
 IS 17867 (Part 2):2022
ISO 13990-2 : 2006
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 2: Connecting dimensions for yarn feeders and yarn control devices
-
Identical under dual numbering
105.
 IS 17867 (Part 3):2022
ISO 13990-3 : 2006
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 3: Dimensions for connecting and interconnection cables
-
Identical under dual numbering
106.
 IS 17868:2022
ISO 368 : 2017
Spinning preparatory spinning and doubling twisting machinery Tubes for ring-spinning doubling and twisting spindles taper 1:38 and 1:64
-
Identical under dual numbering
107.
 IS 1794:2023
TEXTILE SHUTTLES FOR PLAIN CALICO LOOMS SPECIFICATION (Second Revision)
-
Indigenous
108.
 IS 1896:2023
TEXTILE PICKING STICKS FOR OVERPICK COTTON LOOMS SPECIFICATION (Third Revision)
-
Indigenous
109.
 IS 1903:1977
Reviewed In : 2023
Recommendations on shape and dimensions of jute loom pickers (first revision)
November, 2023
-
Indigenous
110.
 IS 1906:2023
RECOMMENDATION FOR SHAPE AND DIMENSIONS OF 4B PICKERS (Third Revision)
-
Indigenous
111.
 IS 1938:2023
TEXTILES COTTON CAMBS FOR USE IN JUTE LOOMS SPECIFICATION (Third Revision)
-
Indigenous
112.
 IS 2058:2023
TEXTILES SHUTTLES FOR PIRN-CHANGING AUTOMATIC COTTON LOOMS SPECIFICATION (Second Revision)
-
Indigenous
113.
 IS 2487:2023
TEXTILES FLAT STEEL HEALDS EXCLUDING JACQUARD AND LENO WEAVING HEALDS SPECIFICATION (Second Revision)
-
Indigenous
114.
 IS 2510:2024
TEXTILES - BOTTOM ROLLERS FOR DRAFTING SYSTEMS - SPECIFICATION (Fourth Revision)
-
Indigenous
115.
 IS 2531:2023
TEXTILES CRANK SHAFT FOR COTTON LOOMS SPECIFICATION (Second Revision)
-
Indigenous
116.
 IS 2699:2022
TEXTILES FLATS AND FLATS SCREWS SPECIFICATION (Second Revision)
-
Indigenous
117.
 IS 2784:2023
TEXTILES SHUTTLE FOR AUTOMATIC COP CHANGING JUTE LOOMS SPECIFICATION (Second Revision)
-
Indigenous
118.
 IS 2823:2023
TEXTILES TWIN WIRE HEALDS FOR JACQUARD WEAVING SPECIFICATION (Second Revision)
-
Indigenous
119.
 IS 2910:2024
TEXTILES - SHUTTLES FOR JUTE BROAD LOOMS - SPECIFICATION (Second Revision)
-
Indigenous
120.
 IS 3078:2023
TEXTILES RINGS FOR SPINNING AND DOUBLING FRAMES SPECIFICATION (Fifth Revision)
-
Indigenous
121.
 IS 3176:2023
TEXTILES TOP ROLLERS FOR RING AND SPEED FRAMES SPECIFICATION (Third Revision)
-
Indigenous
122.
 IS 3189:1981
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for high-speed bobbins for jute industry (first revision)
March, 2019
-
Indigenous
123.
 IS 3190:1993
ISO 92
Reviewed In : 2023
Textile machinery and accessories – Spinning machinery – Definition of side (left or right) (second revision)
November, 2023
-
Identical under dual numbering
124.
 IS 3199:2022
Textile machinery and accessories Weaving preparatory machines and weaving looms Definition of left and right sides first revision
-
Indigenous
125.
 IS 3265:1987
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for weft pirns (taper fit) for use in shuttles for plain calico looms (second revision)
November, 2019
-
Indigenous
126.
 IS 3340:2024
TEXTILES HARNESS DOBBY AND JACQUARD SPECIFICATION Second Revision of IS 3340
-
Indigenous
127.
 IS 3523:1974
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for metal travellers for ring spinning frame (second revision)
November, 2024
3
Indigenous
128.
 IS 3625 (Part 1):2020

Reviewed In : 2025
Specification for Warp Tubes for Ring Spinning and Doubling Spindles Part 1 Specific Requirements ( Third Revision )
March, 2025
-
Indigenous
129.
 IS 3625 (Part 4):1986
Reviewed In : 2025
Specification for warp tubes for ring spinning and doubling spindles – Part 4 Recommended dimensions for tubes, taper 1:40 (second revision)
June, 2025
-
Indigenous
130.
 IS 3627:2023
TEXTILES CLOTH ROLLERS FOR PLAIN CALICO LOOMS SPECIFICATION First Revision of IS 3627
-
Indigenous
131.
 IS/ISO 366-2:2009
ISO 366-2 : 2009
Reviewed In : 2023
Textile machinery and accessories – Reeds Part 2 Dimensions and designation of metal reeds with plate baulk
November, 2023
-
Identical under dual numbering
132.
 IS/ISO 366-3:2009
IS/ISO 366-3 : 2009
Reviewed In : 2023
Textile machinery and accessories – Reeds Part 3 Dimensions and designation of metal reeds with double spring baulk
November, 2023
-
Identical under single numbering
133.
 IS/ISO 366-4:2005
ISO 366-4 : 2005
Reviewed In : 2023
Textile machinery and accessories – Reeds Part 4 Dimensions and designation of plastic bound metal reeds
November, 2023
-
Identical under single numbering
134.
 IS/ISO 366-5:2006
ISO 366-5 : 2006
Reviewed In : 2025
Textile machinery and accessories – Reeds Part 5 Dimensions and designation of profile capsules
June, 2025
-
Identical under single numbering
135.
 IS 3683:2022
Textile machinery and accessories Drop wires for warp stop motions Specification third revision
-
Indigenous
136.
 IS 3789:2023
TEXTILES BARE CLOTH TAKE-UP ROLLERS FOR PLAIN COTTON LOOMS SPECIFICATION First Revision of IS 3789
-
Indigenous
137.
 IS 3825:2023
TEXTILES INSET MAIL WIRE HEALDS FOR JUTE WEAVING SPECIFICATION Third Revision of IS 3825
-
Indigenous
138.
 IS 3934:2023
TEXTILES ALUMINIUM PLUG TYPE SPINDLES FOR SPINNING AND DOUBLING FRAMES SPECIFICATION (Third Revision)
-
Indigenous
139.
 IS 4417:2023
TEXTILES WEFT PIRNS FOR SHUTTLES FOR PIRN-CHANGING AUTOMATIC COTTON WOOLLEN AND WORSTED LOOMS SPECIFICATION Second Revision of IS 4417
-
Indigenous
140.
 IS 4438:2023
TEXTILES PERFORATED STRIPS FOR TAKE-UP ROLLERS SPECIFICATION First Revision of IS 4438
-
Indigenous
141.
 IS 4462:2024
Textiles - Contact Wire Healds for Jute Weaving - Specification ( Second Revision )
-
Indigenous
142.
 IS 4465:2024
TEXTILES METAL HEALD FRAMES FOR FLAT STEEL HEALDS SPECIFICATION Third Revision of IS 4465
-
Indigenous
143.
 IS 4474:2003
Reviewed In : 2023
Textile machinery – Glossary of terms relating to drafting in spinning machinery (first revision)
November, 2023
1
Indigenous
144.
 IS 4775:2023
TEXTILES PICKING STICKS FOR AUTOMATIC AND UNDERPICK LOOMS SPECIFICATION Second Revision of IS 4775
-
Indigenous
145.
 IS 4888 (Part 1):2002
ISO 8489-2
Reviewed In : 2021
Textile machinery and accessories – Cones for cross winding Part 1Dimensions, tolerances and designation of cones with half angle of the cone 30 30' (third revision)
June, 2021
-
Identical under dual numbering
146.
 IS 4888 (Part 2):2002
ISO 8489-3
Reviewed In : 2021
Textile machinery and accessories – Cones for cross winding Part 2 Dimensions, tolerances and designation of cones with half angle of the cone 40 20' (third revision)
June, 2021
-
Identical under dual numbering
147.
 IS 4888 (Part 3):2002
ISO 8489-5
Reviewed In : 2021
Textile machinery and accessories – Cones for cross winding Part 3 Dimensions, tolerances and designation of cones with half angle of the cone 50 57' (third revision)
June, 2021
-
Identical under dual numbering
148.
 IS 4909:2023
TEXTILES CARD AND GILL PINS FOR USE IN JUTE INDUSTRY SPECIFICATION Second Revision of IS 4909
-
Indigenous
149.
 IS/ISO 5247-1:2004
ISO 5247-1 : 2004
Reviewed In : 2023
Textile Machinery and Accessories - Weaving Machines Part 1 Vocabulary and Classification
September, 2023
1
Identical under single numbering
150.
 IS 5473:2024
TEXTILES - DOUBLE FLANGED BOBBINS USED IN WOOLLEN AND WORSTED MILLS - SPECIFICATION (First Revision)
-
Indigenous
151.
 IS 5944:2024
TEXTILES - ACCESSORIES FOR USE IN SHUTTLES FOR JUTE LOOMS - SPECIFICATION (First Revision)
-
Indigenous
152.
 IS 6001:2023
TEXTILES FLYER SPINDLES SPECIFICATION
-
Indigenous
153.
 IS 6068:1992
Reviewed In : 2023
Textile machinery – Spinning machinery (preparatory to doubling) – Nomenclature (first revision)
November, 2023
1
Indigenous
154.
 IS 6254:2024
TEXTILES SIDE WEFT FORKS AND GRATES FOR NON-AUTOMATIC LOOMS SPECIFICATION First Revision of IS 6254
-
Indigenous
155.
 IS 6268:2023
TEXTILES ACCESSORIES FOR USE IN SHUTTLES FOR PLAIN CALICO LOOM SPECIFICATION First Revision of IS 6268
-
Indigenous
156.
 IS 6686:2025
TEXTILES - NOSE BARS FOR SPEED AND RING SPINNING FRAMES - SPECIFICATION (Second Revision)
-
Indigenous
157.
 IS 6786:2024
TEXTILES - CARD GAUGES - SPECIFICATION (Second Revision)
-
Indigenous
158.
 IS 698:1970
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for picking sticks (arms) for overpick jute looms (first revision)
March, 2019
-
Indigenous
159.
 IS 7034:1973
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for wooden staves used for drum rollers of jute carding machines
March, 2019
1
Indigenous
160.
 IS 7043:1973
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for loom (fly) spindles
March, 2019
1
Indigenous
161.
 IS 7075:1983
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for cardboard tubes used as cores for jute fabric rolls (first revision)
November, 2019
-
Indigenous
162.
 IS 7175:2024
TEXTILES - COTS FOR TOP ROLLERS - SPECIFICATION (First Revision)
-
Indigenous
163.
 IS/ISO 8119-1:1989
Reviewed In : 2023
Textile machinery and accessories – Needles for knitting machines – Terminology Part 1 Latch type needles
November, 2023
-
Identical under single numbering
164.
 IS/ISO 8119-2:1989
Reviewed In : 2023
Textile machinery and accessories – Needles for knitting machines – Terminology Part 2 Bearded needles
November, 2023
-
Identical under single numbering
165.
 IS/ISO 8119-3:1992
Reviewed In : 2023
Textile machinery and accessories – Needles for knitting machines – Terminology Part 3 Compound needles
November, 2023
-
Identical under single numbering
166.
 IS 8137:2023
TEXTILES SPRINGS FOR PLAIN CALICO LOOMS SPECIFICATION First Revision of IS 8137
-
Indigenous
167.
 IS 8138:2023
TEXTILES PICKING NOSE BOSS AND SHELL FOR LOOMS SPECIFICATION (First Revision of IS 8138)
-
Indigenous
168.
 IS 8139:2023
TEXTILES PICKING CONE AND BOLT FOR LOOMS SPECIFICATION First Revision of IS 8139
-
Indigenous
169.
 IS 8304:1977
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for wooden winding rollers for textile finishing machines
March, 2019
-
Indigenous
170.
 IS 835:2023
TEXTILES BOTTOM SHAFT FOR COTTON LOOMS SPECIFICATION (Second Revision)
-
Indigenous
171.
 IS 837:1982
Reviewed In : 2024
Specification for doffer and flat stripping comb blades (first revision)
November, 2024
1
Indigenous
172.
 IS 8545:2023
TEXTILES LOOM PICKERS SPECIFICATION First Revision of IS 8545
-
Indigenous
173.
 IS 8567:1994
ISO 477
Reviewed In : 2021
Textile machinery and accessories – Cone and cheese winding machines – Vocabulary (first revision)
June, 2021
-
Identical under dual numbering
174.
 IS 8568:1993
Reviewed In : 2023
Textile machinery and accessories – Pirn winding machines – Vocabulary (first revision)
November, 2023
-
Identical under dual numbering
175.
 IS/ISO 8640-1:2004
ISO 8640 : 2004
Reviewed In : 2023
Textile machinery and accessories – Flat warp knitting machines – Part 1 Vocabulary of basic structure and knitting elements (first revision)
November, 2023
-
Identical under single numbering
176.
 IS/ISO 8640-2:2004
ISO 8640-2 : 2004
Reviewed In : 2023
Textile machinery and accessories – Flat warp knitting machines – Part 2 Vocabulary of warp let-off, fabric take-up and batching (first revision)
November, 2023
-
Identical under single numbering
177.
 IS 8684:2023
TERMS FOR SHUTTLES � CLASSIFICATION (First Revision)
-
Indigenous
178.
 IS 8875:2023
TEXTILES SHEDDING TAPPETS FOR PLAIN CALICO LOOMS SPECIFICATION First Revision of IS 8875
-
Indigenous
179.
 IS 9102 (Part 12):1979
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for rubber blankets for shrinking range
March, 2019
-
Indigenous
180.
 IS 9244 (Part 1):2023
Storage and use of Textile Mill Leather Accessories � Code of Practice Part 1 PICKERS (First Revision)
-
Indigenous
181.
 IS 9280:2023
TEXTILES WOODEN SHUTTLE BLOCKS FOR NON-AUTOMATIC LOOMS SPECIFICATION First Revision of IS 9280
-
Indigenous
182.
 IS 9287:2023
TEXTILES WOODEN SHUTTLE BLOCKS FOR PIRN-CHANGING AUTOMATIC LOOMS SPECIFICATION First Revision of IS 9287
-
Indigenous
183.
 IS 9337 (Part 3):1992
Reviewed In : 2023
Textile machinery and accessories – Bobbins and pirns – Specification Part 3 Plastic flyer bobbins
November, 2023
-
Indigenous
184.
 IS 9337 (Part 3):2025
TEXTILES - BOBBINS AND PIRNS - SPECIFICATION PART 3 PLASTIC FLYER BOBBINS (First Revision)
-
Indigenous
185.
 IS/ISO 94:1982
ISO 94:1982
Reviewed In : 2021
Textile machinery and accessories – Spindle gauges for ring-spinning and ring-doubling frames
June, 2021
-
Identical under single numbering
186.
 IS 9525:1980
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for wires for flexible card clothings
March, 2019
-
Indigenous
187.
 IS 9568 (Part 1):2025
TEXTILES - METALLIC CARD CLOTHING - SPECIFICATION PART I TERMINOLOGY (First Revision)
-
Indigenous
188.
 IS 9568 (Part 1):1980
Reviewed In : 2023
Specification for metallic card clothing – Part 1 Terminology
November, 2023
-
Indigenous
189.
 IS 9568 (Part 2):1981
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for metallic card clothing – Part 2 Bead wires
March, 2019
-
Indigenous
190.
 IS 9568 (Part 3):1982
Reviewed In : 2024
Specification for metallic card clothing – Part 3 Wires for cylinder, doffer and licker-in
March, 2024
-
Indigenous
191.
 IS 9568 (Part 3):2025
TEXTILES - METALLIC CARD CLOTHING - SPECIFICATION PART 3 WIRES FOR CYLINDER DOFFER AND LICKER-IN (First Revision)
-
Indigenous
192.
 IS 9765:2021
ISO 5250 : 2003
Reviewed In : 2026
Textile machinery and accessories Dyeing and finishing machinery Terms for tentering and heat-treatment machinery (First Revision)
March, 2026
-
Identical under dual numbering
193.
 IS 9794:2023
TEXTILES BOARDSBLANKS FOR SLEY BOTTOM RACE CAP AND BOX BACK OF COTTON LOOMS SPECIFICATION First Revision of IS 9794
-
Indigenous

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
No Records Found

Preliminary Draft Standards

SI. No.
Doc No
TITLE
No Records Found

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
No Records Found

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
TXD 14 (28888)
Revision of: IS 837:1982
TEXTILES DOFFER AND FLAT STRIPPING COMB BLADES SPECIFICATION Second Revision

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
No Records Found


Aspect Wise Report

 
 Product:   110
 Code of Practices :    4
 Methods of Test :   1
 Terminology :   34
 Dimensions :   22
 System Standard :   0
 Safety Standard :   8
 Others :    10
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

SI. No.
IS No.
Title
1.
 IS 1041:1988
Reviewed In : 1998
Box Blanks for Jute Looms
2.
 IS 1042:1988
Reviewed In : 1998
Boards for Lay Races of Jute Looms
3.
 IS 1043:1988
Reviewed In : 1998
Blanks for Lay Blocks for Jute Looms
4.
 IS 10626:1983
Reviewed In : 1998
Dimensions of heald carrying rods and C shaped end loops of flat steel healds
5.
 IS 10936:1984
Reviewed In : 2010
Co-ordinated dimensions of heald frames in relation to the pitch of the harness
6.
 IS 11049:2014
ISO 5248
Reviewed In : 2019
Textile Machinery and Accessories Dyeing and Finishing Machinery Vocabulary of Ancillary Devices
7.
 IS 11187:1985
Spring bottoms for cylindrical sliver cans
8.
 IS 11194:1985
Reviewed In : 1998
Jockey Pulleys Used in Ring Spinning and Doubling Frames
9.
 IS 11274:1985
Reviewed In : 1998
Roving Bobbin Holders
10.
 IS 11529:1986
Reviewed In : 2017
Specification for leather check straps for looms
11.
 IS 1274:1958
Cotton Tubular Bending to Drive Spindles for Cotton Textile Mills
12.
 IS 13563:1992
ISO 7506 : 1984
Reviewed In : 2019
Textile machinery and accessories - Numbering of harnesses for drawing - In on jacquard machines
13.
 IS 13681:1993
Reviewed In : 1998
Textile Machinery and Accessories - Thread Guides for Jute Winding Machines
14.
 IS 13865 (Part 2):1994
ISO 5238-2
Reviewed In : 2015
Textile machinery and accessories - Packages of yarns and intermediate products Part 2 forms of winding
15.
 IS 13880:1993
ISO 341
Reviewed In : 2017
Textile machinery and accessories - Cotton spinning machinery - Working width
16.
 IS 13991:1994
ISO 1472
Reviewed In : 2016
Textile machinery and accessories - Cylindrical tubes for draw - Twisters - Dimensions and permissible run - Out
17.
 IS 15417 (Part 1):2003
ISO 366-3
Reviewed In : 2014
Textile machinery and accessories - Reeds Part 1 metal reeds with double - Spring baulk - Dimensions and designation
18.
 IS 15417 (Part 2):2003
ISO 366-4
Reviewed In : 2014
Textile machinery and accessories - Reeds Part 2 plastic bound metal reeds - Dimensions and designation
19.
 IS 1555:1990
Reviewed In : 2012
Textile machinery - Wire reed pitch - Bound for use in cotton loom - Specification Third Revision
20.
 IS 15760 (Part 3):2007
ISO 11677-3
Reviewed In : 2017
Textiles machinery and accessories Main dimensions of flat steel healds with open end loops Part 3 Carrying rods for healds with C- and J- shaped end loops
21.
 IS 1724:1971
Wooden warp bobbins for rabbeth spindles
22.
 IS 1738:1960
Large size spring buffers for cotton looms
23.
 IS 1739:1978
Reviewed In : 2012
Specification for cotton healds for use in cotton looms Second Revision
24.
 IS 1927:1980
Reviewed In : 1998
Flat Driving Chains
25.
 IS 1936:1961
Inset mail wire healds for use in cotton silk woolen and worsted weaving excluding jacquard and fancy weaving
26.
 IS 2579:1963
Box Back Blanks For Cotton Looms
27.
 IS 2623:1964
Blanks For Sley Caps For Cotton Looms
28.
 IS 2624:1964
Boards For Sley Races For Cotton Looms
29.
 IS 2625:1964
Blanks For Sley Bottom For Cotton Looms
30.
 IS 2698:1964
Leather roller skins
31.
 IS 270:1950
Code for manufacture of pickers
32.
 IS 2929:1964
Bushes for button shaft rocking shaft and crank shaft used on plain calico looms
33.
 IS 3022:1983
Reviewed In : 2012
Specification for metal reeds Second Revision
34.
 IS 3049:1965
Vulcanized fibre silver cans for spinning mills
35.
 IS 3056:1965
Lap Rods
36.
 IS 3158:1965
Aluminium cylindrical silver cans for spinning mills
37.
 IS 3165:1990
Reviewed In : 2017
Textile Machinery - Beam Weaver s for Use in Plain Calico Loom
38.
 IS 3166:1987
Reviewed In : 2012
Reed spaces for plain calico looms First Revision
39.
 IS 3183:1965
Saw toothed wire for licker-in cylinder
40.
 IS 3341:1965
Dobby Harness
41.
 IS 3368:1984
Reviewed In : 2019
Specification for wooden heald frames for wire and flat steel healds second revision
42.
 IS 342:1976
Reviewed In : 2007
Varnish Acid Resisting
43.
 IS/ISO 342:1983
Reviewed In : 2017
Textile machinery and accessories - Worsted and woollen cards - Width of cylinder and width on the wire
44.
 IS 3446:1977
Leather Aprons For Drafting Systems
45.
 IS 3496:1966
Reviewed In : 2017
Specification for dobby lags and pegs
46.
 IS 3619:1966
Wooden Staves For Cotton Healds
47.
 IS 3625 (Part 2):1984
Reviewed In : 2017
Specification for warp tubes for ring spinning and doubling spindles Part 2 Recommended dimensions for tubes taper 1 38 second revision
48.
 IS 3625 (Part 3):1984
Reviewed In : 2017
Specification for warp tubes for ring spinning and doubling spindles Part 3 Recommended dimensions for tubes taper 1 64 second revision
49.
 IS/ISO 366-1:1988
Reviewed In : 2019
Textile machinery and accessories Reeds Part 1 Pitch bound reeds Dimensions
50.
 IS 3698:1991
Reviewed In : 2000
Textile Machinery - Spindle for ring frame Rabbeth type
51.
 IS 3833:1966
Flyer Bobbins
52.
 IS 3834:1966
Lease Rods For Cotton Looms
53.
 IS 3977:1967
Bottom Roller For Speed Frames
54.
 IS 4042:1967
Specification for single faced sluice gates 200 To 1200 Mm Size
55.
 IS 4187:1967
Reviewed In : 1998
Skewers for Use on Cotton Speed Frames
56.
 IS 4416:1967
Reviewed In : 2017
Specification for dobby barrels
57.
 IS 4470:1976
Reviewed In : 2012
Specification for all - Metal leasing reeds for warping First Revision
58.
 IS 4888 (Part 4):1982
Reviewed In : 1994
Cones for Yarn Winding - Part IV Half Angle of the Cone 915
59.
 IS 4892:1987
ISO 5235
Reviewed In : 2009
Synthetic Rubber Aprons Reinforced for Drafting Systems
60.
 IS 5138:2001
Ear-shaped Metal Travellers for Doubling Frames
61.
 IS 5141:1969
Reviewed In : 2012
Specification for wooden cones for winding yarn
62.
 IS 5492:1969
Reviewed In : 1998
Pirns for Woollen and Worsted Plain Looms
63.
 IS 5938:1970
Spindle gauges for cotton ring spinning and ring doubling twisting frames
64.
 IS 6300:1971
Pickers savers formaldehyde tanned leather
65.
 IS 6317:1971
Rings for ring doubling twisting frames for ear shaped traveller
66.
 IS 699 (Part 1):1993
Reviewed In : 1998
Textile machinery and accessories - Cross wound spool centres for jute winding machines Part 1 Spool centres for spool winding machines
67.
 IS 699 (Part 2):1993
Reviewed In : 1998
Textile machinery and accessories - Cross wound spool centres for jute winding machines Part 2 Spool centres for precision winding machines
68.
 IS 7488:1974
Working widths of worsted and woollen cards
69.
 IS 759:1988
Reviewed In : 1998
Blanks for Swells of Jute Looms
70.
 IS 7614:1975
Reviewed In : 2017
Specification for wooden bobbins for ring doubling and twisting frames
71.
 IS 7875 (Part 1):1984
Reviewed In : 1989
Sliver Cans Used in Textile Mills - Part I General Requirements
72.
 IS 7875 (Part 2):1987
Sliver Cans Used in Textile - Part 2 Vulcanized Fibre Sliver Cans
73.
 IS 7875 (Part 3):1987
Sliver Cans Used in Textile Mills - Part 3 Aluminium Alloy Silver Cans
74.
 IS 7875 (Part 4):1983
Reviewed In : 1988
Sliver Cans Used in Textile Mills - Part 4 High Density Polyethylene Sliver Cans
75.
 IS 7875 (Part 5):1985
Sliver Cans Used in Textile Mills - Part 5 Sliver Cans with Castors
76.
 IS 7951:2003
ISO 8116-7 : 1995
Reviewed In : 2019
Textile machinery and accessories Beams for windings Beams for dyeing slivers rovings and yarns second revision
77.
 IS 8014:1983
Reviewed In : 2016
Classification and nomenclature of dyeing and finishing machinery First Revision
78.
 IS 836:1962
Lappets for cotton ring spinning frame
79.
 IS 838:1976
Reviewed In : 1998
Tin Rollers for Cotton Ring Spinning Frames
80.
 IS 8546:1977
Reviewed In : 2017
Requirements for leather or raw - Hide exclusively used in the manufacture of pickers
81.
 IS 8547:1977
Reviewed In : 2022
Recommendations on shape and dimensions of single box picker for automatic looms
82.
 IS 8750:1978
Reviewed In : 1998
Code of practice for packing of bottom rollers for drafting systems
83.
 IS 8831:1978
Reviewed In : 1998
Code of practice for maintenance of bottom rollers for drafting systems
84.
 IS 8974:1978
Reviewed In : 1998
Aprons Combing Leathers for Gill Box Used on Worsted Machinery
85.
 IS 8975:1978
Reviewed In : 1998
Aprons Combing Leathers for French Combs used on Worsted Machinery
86.
 IS 9244 (Part 2):1979
Reviewed In : 2017
Code of practice for storage and use of textile mill leather accessories Part 2 picking bands
87.
 IS 9292:1979
Reviewed In : 2017
Warper s Beams
88.
 IS 9337 (Part 1):1979
Reviewed In : 2014
Specification for bobbins and pirns used in textile mills Part 1 wooden flyer bobbins
89.
 IS 9337 (Part 2):1983
Reviewed In : 2014
Specification for bobbins and pirns used in textile mills Part 2 wooden warp bobbins for rabbeth spindles
90.
 IS 94:1950
Reviewed In : 2007
Oil Paste for Paints to Indian Standard Colours


Annexure-II :List of Indian Product Standards

SI. No.
IS No. & Year
Title
1.
 IS 10347:1982
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for serrated bars for mechanlcal warp stop motions
2.
 IS 10509:1983
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for dead spindles used on jute spinning frames
3.
 IS 10598:2023
TEXTILES GUIDE ROLLERS FOR DYEING AND FINISHING MACHINERY SPECIFICATION Second Revision
4.
 IS 10795:2024
TEXTILES ACCESSORIES FOR USE IN SHUTTLES FOR PIRN-CHANGING AUTOMATIC COTTON LOOMS SPECIFICATION First Revision of IS 10795
5.
 IS 10948:1984
ISO 570
Reviewed In : 2024
Dimensions of heald carrying rods for healds with closed O 39 shaped end loops
6.
 IS 11059:2022
Textile machinery and accessories Cylindrical tubes for open-end spinning Specification first revision
7.
 IS 11508:2023
TEXTILES FALLER BARS FOR JUTE DRAWING FRAMES SPECIFICATION First Revision of IS 11508
8.
 IS 11510:2024
TEXTILES SPINDLE FOR JUTE COP WINDING MACHINE SPECIFICATION First Revision of IS 11510
9.
 IS 11511:1985
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for bobbin carrier for jute spinning frame
10.
 IS 11512:2023
TEXTILES FALLER SCREWS FOR JUTE DRAWING FRAMES SPECIFICATION First Revision of IS 11512
11.
 IS 1186:1971
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for shuttles for hessian and Sacking looms first revision
12.
 IS 11872 (Part 2):1987
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for rollers for drawing and spinning frames in jute mill
13.
 IS 11872 (Part 12):1987
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for rollers for drawing and spinning frames in jute mill
14.
 IS 11898:1986
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for faller bar slides for jute drawing frames
15.
 IS 11899:1986
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for flyers for jute spinning frames
16.
 IS 1190:2023
TEXTILES TWIN WIRE HEALDS FOR WEAVING SPECIFICATION Fourth Revision
17.
 IS 11933:2023
TEXTILES 4B PLASTIC PICKERS SPECIFICATION First Revision of IS 11933
18.
 IS 1225:2023
TEXTILES LEATHER PICKING BANDS FOR LOOMS SPECIFICATION Second Revision
19.
 IS 12297:1988
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for delivery roller boss for jute drawing frame
20.
 IS 12298:1988
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for wooden card staves set with pins for cylindrical drum rollers of jute carding machine
21.
 IS 12307:1988
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for delivery pressing roller boss for jute drawing frame
22.
 IS 12318:2023
TEXTILES PICKING CONE AND PICKING STUD FOR JUTE LOOMS SPECIFICATION
23.
 IS 12339:2023
TEXTILES CRANK SHAFT FOR JUTE LOOMS SPECIFICATION
24.
 IS 12885:2023
TEXTILES PRESSING ROLLER ASSEMBLY FOR JUTE DRAWING FRAME SPECIFICATION First Revision of IS 12885
25.
 IS 12886:2023
TEXTILES HEART CAM FOR JUTE SPINNING FRAME SPECIFICATION First Revision of IS 12886
26.
 IS 12890:2024
TEXTILES BOBBIN RAIL FOR JUTE SPINNING FRAMES SPECIFICATION First Revision of IS 12890
27.
 IS 13221:2023
TEXTILES CAMS FALLER SCREW FOR SCREW GILL JUTE DRAWING FRAME SPECIFICATION First Revision of IS 13221
28.
 IS 13560:2024
TEXTILES - DRUM PULLEYS TR PULLEYS USED IN RING SPINNING AND DOUBLING FRAMES- SPECIFICATION First Revision
29.
 IS 13561:2024
TEXTILES - EAR-SHAPED NYLON TRAVELLERS FOR RING DOUBLING AND TWISTING - SPECIFICATION First Revision
30.
 IS 13628:1992
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery - Squeezing rollers for textile finishing machines - Specification
31.
 IS 13629:2004
Reviewed In : 2024
Textile machinery Stainless steel drying cylinders used in textile processing Specification first revision
32.
 IS 13682:1993
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery and accessories - Bobbin rail pin and plate for jute spinning frame - Specification
33.
 IS 13720:1993
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery and accessories - Pressing roller assembly for jute spinning frame - Specification
34.
 IS 13721:1993
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery and accessories - Bobbin rail boss for jute spinning frame - Specification
35.
 IS 13747:1993
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery Hand-operated single bed type domestic knitting machines Specification
36.
 IS 14675:1999
Reviewed In : 2019
Reaffirmed but not taken up for revision
Bottom drafting rollers for CHARKHAS Specification
37.
 IS 14676:1999
Reviewed In : 2019
Reaffirmed but not taken up for revision
Spinning rings used in CHARKHAS Specification
38.
 IS 14677:2023
TEXTILES SPINDLES WITH BOLSTERS FOR CHARKHAS SPECIFICATION First Revision of IS 14677
39.
 IS 14711:1999
Reviewed In : 2019
Reaffirmed but not taken up for revision
Textile machinery and accessories Frame components of CHARKHAS Specification
40.
 IS 14783 (Part 1):2000
Reviewed In : 2024
Textiles machinery and accessories - Cylindrical sliver cans Part 1 specification
41.
 IS 14783 (Part 3):2014
ISO 93-2
Reviewed In : 2023
Textile machinery and accessories Cylindrical sliver cans Part 3 Spring bottoms first revision
42.
 IS 15379:2003
ISO 9904
Reviewed In : 2023
Textile machinery and accessories - Steel pins for spinning preparatory and spinning machinery
43.
 IS 15384:2003
ISO 8116-9
Reviewed In : 2023
Textile machinery and accessories - Beams for winding - Dyeing beams for textile fabrics
44.
 IS 15412:2003
Reviewed In : 2024
Textile machinery Ceramic thread guides for man-made fibre processing machines Specification
45.
 IS 1552:2025
TEXTILES - PITCH-BOUND WIRE REEDS FOR JUTE LOOMS - SPECIFICATION Third Revision
46.
 IS 15761 (Part 2):2014
ISO 96-2
Reviewed In : 2023
Textile machinery and accessories Rings and travellers for ring spinning and ring twisting frames Part 2 HZ- and J-rings and their travellers first revision
47.
 IS 1619:2023
TEXTILES BUFFER BAND FOR COP-CHANGING AUTOMATIC LOOMS SPECIFICATION Second Revision
48.
 IS 16582 (Part 2):2018
ISO 8116-2 : 2008
Reviewed In : 2022
Textile machinery and accessories Beams for winding Part 2 Warper s beams
49.
 IS 16582 (Part 3):2018
ISO 8116-3 : 2008
Reviewed In : 2022
Textile machinery and accessories Beams for winding Part 3 Weaver s beams
50.
 IS 16582 (Part 5):2018
ISO 8116-5 : 2008
Reviewed In : 2022
Textile machinery and accessories Beams for winding Part 5 Sectional beams for warp knitting machines
51.
 IS 1737:2023
TEXTILE SPRING BUFFERS FOR COTTON LOOMS SPECIFICATION Second Revision
52.
 IS 17454:2023
TEXTILES GENERAL REQUIREMENT FOR SANITARY NAPKIN VENDING MACHINE SPECIFICATION
53.
 IS 1794:2023
TEXTILE SHUTTLES FOR PLAIN CALICO LOOMS SPECIFICATION Second Revision
54.
 IS 1896:2023
TEXTILE PICKING STICKS FOR OVERPICK COTTON LOOMS SPECIFICATION Third Revision
55.
 IS 1938:2023
TEXTILES COTTON CAMBS FOR USE IN JUTE LOOMS SPECIFICATION Third Revision
56.
 IS 2058:2023
TEXTILES SHUTTLES FOR PIRN-CHANGING AUTOMATIC COTTON LOOMS SPECIFICATION Second Revision
57.
 IS 2487:2023
TEXTILES FLAT STEEL HEALDS EXCLUDING JACQUARD AND LENO WEAVING HEALDS SPECIFICATION Second Revision
58.
 IS 2510:2024
TEXTILES - BOTTOM ROLLERS FOR DRAFTING SYSTEMS - SPECIFICATION Fourth Revision
59.
 IS 2531:2023
TEXTILES CRANK SHAFT FOR COTTON LOOMS SPECIFICATION Second Revision
60.
 IS 2699:2022
TEXTILES FLATS AND FLATS SCREWS SPECIFICATION Second Revision
61.
 IS 2784:2023
TEXTILES SHUTTLE FOR AUTOMATIC COP CHANGING JUTE LOOMS SPECIFICATION Second Revision
62.
 IS 2823:2023
TEXTILES TWIN WIRE HEALDS FOR JACQUARD WEAVING SPECIFICATION Second Revision
63.
 IS 2910:2024
TEXTILES - SHUTTLES FOR JUTE BROAD LOOMS - SPECIFICATION Second Revision
64.
 IS 3078:2023
TEXTILES RINGS FOR SPINNING AND DOUBLING FRAMES SPECIFICATION Fifth Revision
65.
 IS 3176:2023
TEXTILES TOP ROLLERS FOR RING AND SPEED FRAMES SPECIFICATION Third Revision
66.
 IS 3189:1981
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for high-speed bobbins for jute industry first revision
67.
 IS 3265:1987
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for weft pirns taper fit for use in shuttles for plain calico looms second revision
68.
 IS 3340:2024
TEXTILES HARNESS DOBBY AND JACQUARD SPECIFICATION Second Revision of IS 3340
69.
 IS 3523:1974
Reviewed In : 2024
Decision taken to Reaffirm and Archive
Specification for metal travellers for ring spinning frame second revision
70.
 IS 3625 (Part 1):2020

Reviewed In : 2025
Specification for Warp Tubes for Ring Spinning and Doubling Spindles Part 1 Specific Requirements Third Revision
71.
 IS 3627:2023
TEXTILES CLOTH ROLLERS FOR PLAIN CALICO LOOMS SPECIFICATION First Revision of IS 3627
72.
 IS 3683:2022
Textile machinery and accessories Drop wires for warp stop motions Specification third revision
73.
 IS 3789:2023
TEXTILES BARE CLOTH TAKE-UP ROLLERS FOR PLAIN COTTON LOOMS SPECIFICATION First Revision of IS 3789
74.
 IS 3825:2023
TEXTILES INSET MAIL WIRE HEALDS FOR JUTE WEAVING SPECIFICATION Third Revision of IS 3825
75.
 IS 3934:2023
TEXTILES ALUMINIUM PLUG TYPE SPINDLES FOR SPINNING AND DOUBLING FRAMES SPECIFICATION Third Revision
76.
 IS 4417:2023
TEXTILES WEFT PIRNS FOR SHUTTLES FOR PIRN-CHANGING AUTOMATIC COTTON WOOLLEN AND WORSTED LOOMS SPECIFICATION Second Revision of IS 4417
77.
 IS 4438:2023
TEXTILES PERFORATED STRIPS FOR TAKE-UP ROLLERS SPECIFICATION First Revision of IS 4438
78.
 IS 4462:2024
Textiles - Contact Wire Healds for Jute Weaving - Specification Second Revision
79.
 IS 4465:2024
TEXTILES METAL HEALD FRAMES FOR FLAT STEEL HEALDS SPECIFICATION Third Revision of IS 4465
80.
 IS 4775:2023
TEXTILES PICKING STICKS FOR AUTOMATIC AND UNDERPICK LOOMS SPECIFICATION Second Revision of IS 4775
81.
 IS 4888 (Part 2):2002
ISO 8489-3
Reviewed In : 2021
Textile machinery and accessories Cones for cross winding Part 2 Dimensions tolerances and designation of cones with half angle of the cone 40 20 39 third revision
82.
 IS 4909:2023
TEXTILES CARD AND GILL PINS FOR USE IN JUTE INDUSTRY SPECIFICATION Second Revision of IS 4909
83.
 IS 5473:2024
TEXTILES - DOUBLE FLANGED BOBBINS USED IN WOOLLEN AND WORSTED MILLS - SPECIFICATION First Revision
84.
 IS 5944:2024
TEXTILES - ACCESSORIES FOR USE IN SHUTTLES FOR JUTE LOOMS - SPECIFICATION First Revision
85.
 IS 6001:2023
TEXTILES FLYER SPINDLES SPECIFICATION
86.
 IS 6254:2024
TEXTILES SIDE WEFT FORKS AND GRATES FOR NON-AUTOMATIC LOOMS SPECIFICATION First Revision of IS 6254
87.
 IS 6268:2023
TEXTILES ACCESSORIES FOR USE IN SHUTTLES FOR PLAIN CALICO LOOM SPECIFICATION First Revision of IS 6268
88.
 IS 6686:2025
TEXTILES - NOSE BARS FOR SPEED AND RING SPINNING FRAMES - SPECIFICATION Second Revision
89.
 IS 6786:2024
TEXTILES - CARD GAUGES - SPECIFICATION Second Revision
90.
 IS 698:1970
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for picking sticks arms for overpick jute looms first revision
91.
 IS 7034:1973
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for wooden staves used for drum rollers of jute carding machines
92.
 IS 7043:1973
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for loom fly spindles
93.
 IS 7075:1983
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for cardboard tubes used as cores for jute fabric rolls first revision
94.
 IS 7175:2024
TEXTILES - COTS FOR TOP ROLLERS - SPECIFICATION First Revision
95.
 IS 8137:2023
TEXTILES SPRINGS FOR PLAIN CALICO LOOMS SPECIFICATION First Revision of IS 8137
96.
 IS 8138:2023
TEXTILES PICKING NOSE BOSS AND SHELL FOR LOOMS SPECIFICATION First Revision of IS 8138
97.
 IS 8139:2023
TEXTILES PICKING CONE AND BOLT FOR LOOMS SPECIFICATION First Revision of IS 8139
98.
 IS 8304:1977
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for wooden winding rollers for textile finishing machines
99.
 IS 835:2023
TEXTILES BOTTOM SHAFT FOR COTTON LOOMS SPECIFICATION Second Revision
100.
 IS 837:1982
Reviewed In : 2024
Specification for doffer and flat stripping comb blades first revision
101.
 IS 8545:2023
TEXTILES LOOM PICKERS SPECIFICATION First Revision of IS 8545
102.
 IS 8875:2023
TEXTILES SHEDDING TAPPETS FOR PLAIN CALICO LOOMS SPECIFICATION First Revision of IS 8875
103.
 IS 9280:2023
TEXTILES WOODEN SHUTTLE BLOCKS FOR NON-AUTOMATIC LOOMS SPECIFICATION First Revision of IS 9280
104.
 IS 9287:2023
TEXTILES WOODEN SHUTTLE BLOCKS FOR PIRN-CHANGING AUTOMATIC LOOMS SPECIFICATION First Revision of IS 9287
105.
 IS 9337 (Part 3):2025
TEXTILES - BOBBINS AND PIRNS - SPECIFICATION PART 3 PLASTIC FLYER BOBBINS First Revision
106.
 IS/ISO 94:1982
ISO 94:1982
Reviewed In : 2021
Textile machinery and accessories Spindle gauges for ring-spinning and ring-doubling frames
107.
 IS 9525:1980
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for wires for flexible card clothings
108.
 IS 9568 (Part 2):1981
Reviewed In : 2019
Reaffirmed but not taken up for revision
Specification for metallic card clothing Part 2 Bead wires
109.
 IS 9568 (Part 3):2025
TEXTILES - METALLIC CARD CLOTHING - SPECIFICATION PART 3 WIRES FOR CYLINDER DOFFER AND LICKER-IN First Revision
110.
 IS 9794:2023
TEXTILES BOARDSBLANKS FOR SLEY BOTTOM RACE CAP AND BOX BACK OF COTTON LOOMS SPECIFICATION First Revision of IS 9794