Programme of work



BUREAU OF INDIAN STANDARDS



Programme of Work






Transport Engineering Department








COMMITTEE WISE PROGRAMME OF WORK OF Transport Engineering Department

 
Sl No. Committee Title
1 TED 2 Automotive Primemovers, Transmission Systems and Internal Combustion Engine Sectional Commiittee
2 TED 4 Automotive Braking Systems, Vehicle Testing, Steering and performance Evaluation Sectional Commiittee
3 TED 6 Automotive Body, Chassis and Accessories Sectional Committee Sectional Commiittee
4 TED 7 Automotive Tyres, Tubes And Rims Sectional Commiittee
5 TED 11 Automotive Electrical Equipment and Instruments Sectional Commiittee
6 TED 14 Air and Space Vehicles Sectional Committee Sectional Commiittee
7 TED 16 Bicycles Sectional Commiittee
8 TED 17 Shipbuilding Sectional Commiittee
9 TED 18 Inland, Harbour Crafts And Fishing Vessels Sectional Commiittee
10 TED 19 Marine Engineering And Safety Aids Sectional Commiittee
11 TED 22 Transport Tractors, Trailers And Industrial Trucks Sectional Commiittee
12 TED 24 Transport Packages, Packaging Codes and Pallets Sectional Committee Sectional Commiittee
13 TED 26 Automotive Vehicles Running on Non Conventional Energy Sources Sectional Commiittee
14 TED 27 Electric And Hybrid Vehicles Sectional Commiittee
15 TED 28 Intelligent Transport Systems Sectional Commiittee
16 TED 29 Passive Safety Crash Protection Systems Sectional Commiittee
17 TED 31 In service Vehicle Inspection, Certification and Garage Equipment Sectional Committee Sectional Commiittee
18 TED 32 Unmanned Aerial Vehicles Sectional Committee Sectional Commiittee
19 TED 33 Freight Containers Sectional Committee Sectional Commiittee
20 TED 34 Springs and Suspension Systems Sectional Committee Sectional Commiittee
21 TED 35 Road Safety Sectional Committee Sectional Commiittee
22 Annexure-I List of Indian Standards Withdrawn/Superseded
23 Annexure-II List of Indian Product Standards
 



Aspect Wise Report

 
 Product:   604
 Code of Practices :    150
 Methods of Test :   241
 Terminology :   72
 Dimensions :   82
 System Standard :   8
 Safety Standard :   14
 Others :    20
 Service Specification :    6
 Process Specification :    1
 Unclassified :    95
 


TED 2:Automotive Primemovers, Transmission Systems and Internal Combustion Engine
  • Scope : a) Standardization relating to automotive engines and transmission, components, Stationary Internal Combustion engines for agriculture and general. b) Co-ordination of work with ISO/ TC 22 and its Sub-committee ISO/ TC 22/ SC 34, c) Co-ordination of work with ISO/ TC 70 and its Sub-committees ISO/ TC 70/ SC 7 and ISO/ TC 70/ SC 8.
  • Liaison :
    ISO/TC 22/SC 34 - Propulsion, powertrain and powertrain fluids - Participating (P)
    ISO/TC 22/SC 34/WG 1 - Fuel filters
    ISO/TC 22/SC 34/WG 3 - Air filters
    ISO/TC 70 - Internal combustion engines - Participating (P)
    ISO/TC 70/SC 7 - Tests for lubricating oil filters - Participating (P)
    ISO/TC 70/SC 7/WG 2 - Review of the no-reproducibility of Round Robin filtration efficiency results
    ISO/TC 70/SC 8 - Exhaust gas emission measurement - Participating (P)

Published Standards

SI. No.
IS No.
Title
Reaffirmation Details
No. of Amendments
Degree of Equivalence
1.
IS 10000 (Part 1) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 1 glossary of terms relating to test methods
November, 2020
-
Indigenous
2.
IS 10000 (Part 2) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 2 standar d reference conditions
November, 2020
1
Indigenous
3.
IS 10000 (Part 3) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 3 measurements for testing - Units and limits of accuracy
November, 2020
1
Indigenous
4.
IS 10000 (Part 4) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 4 declaration of power efficiency fuel consumption and lubricating oil consumption
November, 2020
1
Indigenous
5.
IS 10000 (Part 5) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 5 preparation for tests and measurements for wear
November, 2020
1
Indigenous
6.
IS 10000 (Part 6) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 6 recording of test results
November, 2020
1
Indigenous
7.
IS 10000 (Part 7) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 7 governing tests for constant speed engines and selection of engines for use with electrical generators
November, 2020
2
Indigenous
8.
IS 10000 (Part 8) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 8 performance tests
November, 2020
1
Indigenous
9.
IS 10000 (Part 9) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 9 endurance tests
November, 2020
-
Indigenous
10.
IS 10000 (Part 10) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 10 tests for smoke levels limits and corrections for smoke levels for variable speed compression ignition engines
November, 2020
-
Indigenous
11.
IS 10000 (Part 11) : 1980
Reviewed In : 2020
Methqds of tests for internal combustion engines Part 11 information to be supplied by the purchaser to the manufacturer and information to be supplied by the manufacturer along with the engine
November, 2020
-
Indigenous
12.
IS 10000 (Part 12) : 1980
Reviewed In : 2020
Methods of tests for internal combustion engines Part 12 specimen test certificates
November, 2020
-
Indigenous
13.
IS 10000 (Part 13) : 2002
Reviewed In : 2018
Methods of tests for internal combustion engines Part 13 recommendations on nature of tests required for functional changes in critical components
December, 2018
1
Indigenous
14.
IS 10001 : 1981
ISO 3046
Reviewed In : 2021
Performance Requirements for Constant Speed Compression ignition diesel engines for general purposes up to 20 kW
July, 2021
6
Modified/Technically Equivalent
15.
IS H10001 : 1981
ISO 3046
Reviewed In : 2021
Specification for performance requirements for constant speed compression ignition Diesel engines for general purposes Up To 20 Kw
July, 2021
6
Modified/Technically Equivalent
16.
IS 10002 : 1981
ISO 3046
Reviewed In : 2021
Specification for performance requirements for constant speed compression ignition Diesel engines for general purposes Above 20 KW
July, 2021
3
Modified/Technically Equivalent
17.
IS 10105 : 1982
Reviewed In : 2019
Specification for fittings for cylinder pressure indicators for internal combustion engines
September, 2019
2
Indigenous
18.
IS 10323 : 2019

Crank and chain wheel for moped - Specification First Revision
-
-
Indigenous
19.
IS 10478 : 2018
ISO 6519 : 2015
Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs Second Revision
-
-
Identical under dual numbering
20.
IS 10533 : 1983
Reviewed In : 2019
Specification for valve guides for internal combustion engines
September, 2019
-
Indigenous
21.
IS 10651 : 2019

Hub axle front for moped - Specification First Revision
-
-
Indigenous
22.
IS 10652 : 2019

Pedal assembly for moped - Specification First Revision
-
-
Indigenous
23.
IS 10653 : 2019

Hub axle rear for moped - Specification First Revision
-
-
Indigenous
24.
IS 11139 : 2019

Adjusters for control cables for moped - Specification First Revision
-
-
Indigenous
25.
IS 11170 : 1985
ISO 3046
Reviewed In : 2021
Specification for 1 performance requirements for constant speed compression ignition Diesel engines for agricultural purposes Up To 20 KW
July, 2021
5
Modified/Technically Equivalent
26.
IS 11509 (Part 1) : 2012
ISO 4548-1 : 1997
Reviewed In : 2017
Methods of test for full - Flow lubricating oil filters for internal combustion engines Part 1 differential pressure flow characteristics First Revision
December, 2017
-
Identical under dual numbering
27.
IS 11509 (Part 2) : 2012
ISO 4548-2 : 1997
Reviewed In : 2017
Methods of test for full - Flow lubricating oil filters for internal combustion engines Part 2 element by - Pass valve characteristics First Revision
December, 2017
-
Identical under dual numbering
28.
IS 11509 (Part 3) : 2012
ISO 4548-3 : 1997
Reviewed In : 2017
Methods of test for full - Flow lubricating oil filters for internal combustion engines Part 3 resistance to high differential pressure and to elevated temperature First Revision
December, 2017
-
Identical under dual numbering
29.
IS 11509 (Part 5) : 2023
ISO 4548-5:2020
Method of test for full-flow lubricating oil filters for internal combustion engines - Part 5 Test for hydraulic pulse durability
-
30.
IS 11838 : 1986
Reviewed In : 2021
Recommendations for measurement of quality characteristics of gudgeon pins
July, 2021
1
Indigenous
31.
IS 12025 : 1987
Reviewed In : 2017
Recommendations for measurement of quality characteristics for pistons
December, 2017
1
Indigenous
32.
IS 12352 : 1988
Reviewed In : 2019
Specification for fuel injection pump mounting bolts
September, 2019
-
Indigenous
33.
IS 12404 : 1988
Reviewed In : 2019
Specification for couplings for driving fuel injection pumps
September, 2019
-
Indigenous
34.
IS 12455 : 1988
Reviewed In : 2019
Performance requirements of aircooled spark ignition automotive engines
September, 2019
-
Indigenous
35.
IS 12460 : 1988
Reviewed In : 2019
Automotive vehicles - Transmission systems - Manual control sequence in automatic transmissions - Recommendations
September, 2019
1
Indigenous
36.
IS 12499 : 1988
Reviewed In : 2019
Specification for two stage 0 5 litre diesel fuel filters
September, 2019
-
Indigenous
37.
IS 12500 : 1988
Reviewed In : 2019
Specification for 0 2 litre diesel fuel filters
September, 2019
-
Indigenous
38.
IS 12535 (Part 1) : 1988
Reviewed In : 2019
Automotive vehicles - Transmission systems - Glossary Part 1 general definitions
September, 2019
-
Indigenous
39.
IS 12535 (Part 2) : 1991
Reviewed In : 2021
Automotive vehicles - Transmission systems - Glonssary Part 2 universal joints and driveshafts
July, 2021
-
Indigenous
40.
IS 12535 (Part 3) : 1991
Reviewed In : 2021
Automotive vehicles - Transmission systems - Glossary Part 3 drive axles definitions
July, 2021
-
Indigenous
41.
IS 12587 : 1989
Reviewed In : 2019
Automotive vehicles - Transmission system - Gear arrangement - Recommendations
September, 2019
-
Indigenous
42.
IS 12902 : 1990
ISO 7646
Reviewed In : 2021
Commercial vehicles and buses - Gearbox flanges - Type A
July, 2021
-
Identical under dual numbering
43.
IS 12903 : 1990
ISO 7647
Reviewed In : 2021
Commercial vehicles and buses - Gearbox flanges - Type S
July, 2021
-
Identical under dual numbering
44.
IS 12904 : 1990
ISO 7648
Reviewed In : 2021
Flywheel housings for reciprocating internal combustion engines - Nominal dimensions and tolerances
July, 2021
-
Identical under dual numbering
45.
IS 12905 : 1990
ISO 7653
Reviewed In : 2021
Commercial Vehicles-couplings Between Power Take-offs PTO s and Ancillary Driven Units
July, 2021
-
Identical under dual numbering
46.
IS 12972 : 1990
ISO 7707
Reviewed In : 2021
Commercial road vehicles - Connections for rear - Mounted power take - Offs PTO
July, 2021
-
Identical under dual numbering
47.
IS 12973 : 1990
ISO 7804
Reviewed In : 2021
Commercial road vehicles - Side openings for truck power take - Offs PTO
July, 2021
-
Identical under dual numbering
48.
IS 12978 : 2006
ISO 8667
Reviewed In : 2020
Commercial vehicles and buses - Cross - Tooth gearbox flanges type T First Revision
November, 2020
-
Identical under dual numbering
49.
IS 12996 : 1990
Reviewed In : 2019
Internal combustion engines radiator pressure caps - Specification
September, 2019
-
Indigenous
50.
IS 13016 : 1991
Reviewed In : 2020
Internal combustion engines - Radiator drain cocks - Specification
November, 2020
-
Indigenous
51.
IS 13018 : 1990
Reviewed In : 2019
Internal combustion of test for pressure engines - Method charged engines
September, 2019
-
Indigenous
52.
IS 13029 : 1991
Reviewed In : 2020
Internal combustionengines - setting ignition timing in spark ignition engines - Code of practice
November, 2020
-
Indigenous
53.
IS 13050 : 1991
Reviewed In : 2020
Internal combustion engines - Valve seat inserts - Specification
November, 2020
-
Indigenous
54.
IS 13051 : 1991
Reviewed In : 2020
Internal combustion engines radiator fans - Specification
November, 2020
-
Indigenous
55.
IS 13052 : 1991
Reviewed In : 2020
Internal combustion engines - Cylinder liners - Quality characteristics
November, 2020
-
Indigenous
56.
IS 13090 : 2018
ISO 7649
Automotive vehicles - Commercial vehicles - Clutch housings - Dimensions First Revision
-
-
Modified/Technically Equivalent
57.
IS 13686 : 1993
Reviewed In : 2019
Internal combustion engines radiators - Methods of test
January, 2019
-
Indigenous
58.
IS 13687 : 1993
Reviewed In : 2019
Internal combustion engines - Radiators - Heat dissipation performance - Method of test
January, 2019
-
Indigenous
59.
IS 13824 : 1993
Reviewed In : 2019
Internal combustion engines - Method of verification of emission of crankcase gases for vehicles powered with four stroke spark ignition engines
January, 2019
-
Indigenous
60.
IS 14273 : 1999
Reviewed In : 2019
Automotive vehicles - Exhaust emissions - Gaseous pollutants from vehicles fitted with compression ignition engines - Method of measurement
January, 2019
-
Indigenous
61.
IS 14511 (Part 1) : 2007
ISO 8984-1
Reviewed In : 2017
Diesel engines - Testing of fuel injectors Part 1 hand - Lever - Operated testing and setting apparatus First Revision
December, 2017
-
Identical under dual numbering
62.
IS 14511 (Part 2) : 2007
ISO 8984-2
Reviewed In : 2017
Diesel engines - Testing of fuel injectors Part 2 test methods First Revision
December, 2017
-
Identical under dual numbering
63.
IS 14553 : 2008
Reviewed In : 2019
Automotive vehicles - Apparatus for the measurement of opacity Smoke of exhaust gas from vehicles equipped with compression ignition engines - Specification First Revision
January, 2019
-
Indigenous
64.
IS 14599 : 1999
Reviewed In : 2019
Automotive vehicles - Performance requirements Measurement Of Power SFC Opacity of positive and compression ignition engines - Method of test
September, 2019
-
Indigenous
65.
IS 14600 : 1999
Reviewed In : 2019
Automotive vehicles - Exhaust emissions - Gaseous pollutants from vehicles equipped with internal combustion engines - Method of measurement
September, 2019
-
Indigenous
66.
IS 1543 : 1964
Reviewed In : 2023
Specification for single cylinder fuel injection pumps Revised
March, 2023
1
Indigenous
67.
IS 15653 : 2021
ISO 2710-2:2019
Reciprocating internal combustion engine - Vocabulary - Terms for engine maintenance
-
Identical under dual numbering
68.
IS 16057 : 2013
Reviewed In : 2018
Lpg operated internal combustion engines - Safety and performance requirements - Specification
August, 2018
-
Indigenous
69.
IS 17019 : 2018

Gear gerotor oil pump for motorcycle scooter moped - Specification
-
Indigenous
70.
IS 17042 (Part 4) : 2018
ISO 22241-4 : 2009
Diesel Engines NOX Reduction Agent AUS 32 Part 4 Refilling Interface
-
Identical under dual numbering
71.
IS 17042 (Part 5) : 2018
ISO 22241-5 : 2012
Diesel engines - Nox reduction agent aus 32 Part 5 refilling interface for passenger cars
-
Identical under dual numbering
72.
IS 17458 : 2018
ISO 6826 : 1997
Reciprocating internal combustion engine - Fire protection
-
Identical under dual numbering
73.
IS 2765 : 1982
Reviewed In : 2020
Specification for radiator hose First Revision
November, 2020
1
Indigenous
74.
IS 3169 : 1991
Reviewed In : 2020
Internal combustion engines - Two stage one litre diesel fuel filters First Revision
November, 2020
1
Indigenous
75.
IS 3170 (Part 1) : 2006
ISO 2697
Reviewed In : 2020
Internal Combustion Engines - Fuel Injection Nozzles Part 1 Injection Nozzles - Size S
November, 2020
-
Identical under dual numbering
76.
IS 3170 (Part 2) : 2006
ISO 4010
Reviewed In : 2020
Internal combustion engines - Fuel injection nozzles Part 2 calibrating nozzle delay pintle type First Revision
November, 2020
-
Identical under dual numbering
77.
IS 3171 (Part 1) : 1997
ISO 2699
Reviewed In : 2021
Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 1 Flange Mounted Fuel Injectors Size S Types 2 3 4 5 and 6
July, 2021
-
Identical under dual numbering
78.
IS 3171 (Part 2) : 2006
ISO 7026
Reviewed In : 2021
Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 2 Screw-in Injection Nozzle Holders Types 20 21 21 1 and 27 for Pintle Nozzle Size S Type B
February, 2021
-
Identical under dual numbering
79.
IS 3171 (Part 3) : 1997
ISO 7030
Reviewed In : 2021
Internal combustion engines - Fuel injection nozzle holders Part 3 screw mounted injection nozzle holders types 12 13 14 15 16 17 18 and 19
July, 2021
-
Identical under dual numbering
80.
IS 3172 : 1997
Reviewed In : 2021
Internal combustion engines - Fuel injection equipment - Single and double ended pipe unions Single And Double Ended Banjo - Specification Second Revision
July, 2021
1
Indigenous
81.
IS 3173 : 1965
Reviewed In : 2022
Specification for high pressure connections for fuel injection equipment for diesel engines
March, 2022
-
Indigenous
82.
IS 3174 : 1974
Reviewed In : 2023
Specification for pipe union bolt First Revision
March, 2023
-
Indigenous
83.
IS 3175 : 2013
Reviewed In : 2018
Internal combustion engine - Sealing washers for pipe unions - Specification Second Revision
May, 2018
-
Indigenous
84.
IS 3351 : 2006
4020
Reviewed In : 2020
Road vehicles - Fuel filters for diesel engines - Test methods Second Revision
November, 2020
-
Identical under dual numbering
85.
IS 3649 : 2018

Automotive vehicles - Clutch facing for automotive transmission - Specification First Revision
-
-
Indigenous
86.
IS 4530 : 2006
Reviewed In : 2020
GeneraL requirements for positioning and routing of engine exhaust pipes in motor vehicles First Revision
January, 2020
-
Indigenous
87.
IS 5791 : 2006
ISO 6621-3
Reviewed In : 2020
Internal combustion engines - Piston rings - Material specifications Third Revision
November, 2020
-
Identical under dual numbering
88.
IS/ISO 6621-1 : 2018
ISO 6621 : Part 1
Internal Combustion Engines Piston Rings Part 1 Vocabulary First Revision
-
-
Identical under single numbering
89.
IS/ISO 6621-2 : 2020
ISO 6621-2:2020
Internal combustion engines - Piston rings - Part 2 Inspection measuring principles
-
Indigenous
90.
IS 6740 : 1985
Reviewed In : 2020
Specification for gudgeon pins for internal combustion engines First Revision
November, 2020
1
Indigenous
91.
IS 6750 : 1985
Reviewed In : 2020
Specification for cylinder liners for internal combustion engines First Revision
November, 2020
1
Indigenous
92.
IS 7347 : 1974
Reviewed In : 2021
SPECIFICATION FOR PERFORMANCE OF SMALL SIZE SPARK IGNITION ENGINES FOR AGRICULTURAL WATER PUMPS SPRAYERS TILLERS REAPERS AND OTHER SIMILAR APPLICATIONS
August, 2021
4
Indigenous
93.
IS 7449 (Part 1) : 1974
Reviewed In : 2019
Glossary of terms for IC engines Part 1 fuel injection equipment
September, 2019
-
Indigenous
94.
IS 7451 (Part 1) : 2020
ISO 2710-1 : 2017
Reciprocating Internal Combustion Engines Vocabulary Part 1 Terms for Engine Design and Operation Second Revision
-
-
Identical under dual numbering
95.
IS 7451 (Part 2) : 2006
ISO 1204
Reviewed In : 2021
Reciprocating internal combustion engines Part 2 designation of the direction of rotation and of cylinders and valves in cylinder heads and definition of right - Hand and left - Hand in - Line engines and locations on an engine First Revision
July, 2021
-
Identical under dual numbering
96.
IS 7451 (Part 6) : 2007
ISO 2261
Reviewed In : 2017
Reciprocating internal combustion engines Part 6 hand - Operated control devices - Standard direction of motion First Revision
March, 2017
-
Identical under dual numbering
97.
IS 7611 : 1993
Reviewed In : 2019
Internal combustion engines radiators - Specification First Revision
January, 2019
-
Indigenous
98.
IS 7657 (Part 1) : 1975
Reviewed In : 2023
Specification for starter ring gears for internal combustion engines Part 1 gears for inertia and solenoid pre - Engaged starters
March, 2023
1
Indigenous
99.
IS 7657 (Part 2) : 1975
Reviewed In : 2019
Specification for starter ring gears for internal combustion engines Part 2 gears for axial and coaxial starters
September, 2019
-
Indigenous
100.
IS 810 : 1991
Reviewed In : 2020
Internal combustion engines - Engine valves - Specification Second Revision
November, 2020
-
Indigenous
101.
IS 8118 : 2008
Reviewed In : 2019
Automotive vehicles - Opacity Smoke of exhuast gas from vehicles equipped with compression ignition engines operating under free acceleration - Method of measurement Third Revision
January, 2019
-
Indigenous
102.
IS/ISO 8178-1 : 2023
ISO 8178-1:2020
Reciprocating internal combustion engines Exhaust emission measurement Part 1 Test bed measurement systems of gaseous and particulate emissions
-
103.
IS/ISO 8178-3 : 2019
ISO 8178-3:2019
Reciprocating internal combustion engines - Exhaust emission measurement - Part 3 Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter
-
Identical under dual numbering
104.
IS/ISO 8178-4 : 2020
ISO 8178-4:2020
Reciprocating internal combustion engines Exhaust emission measurement Part 4 Steady-state and transient test cycles for different engine applications
-
105.
IS/ISO 8178-7 : 2015
ISO 8178 : Part 7 : 2015
Reviewed In : 2020
Reciprocating internal combustion engine - Exhaust emission measurement Part 7 engine family determination First Revision
November, 2020
-
Identical under single numbering
106.
IS/ISO 8178-8 : 2015
ISO 8178-8 : 2015
Reviewed In : 2020
Reciprocating internal combustion engines - Exhaust emission measurement Part 8 engine group determination
November, 2020
-
Identical under single numbering
107.
IS/ISO 8178-9 : 2019
ISO 8178-9:2019
Reciprocating internal combustion engines - Exhaust emission measurement - Part 9 Test cycles and test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using an opacimeter
-
Identical under single numbering
108.
IS 8422 (Part 1) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 1 plain compression rings from 30 up to 200 mm nominal diameter R - Rings
September, 2019
-
Indigenous
109.
IS 8422 (Part 2) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 2 taper faced compression rings from 30 up to 200 mm nominal diameter M - Rings
September, 2019
-
Indigenous
110.
IS 8422 (Part 3) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 3 keystone rings from 82 up to 200 mm nominal diameter T - Rings 15
September, 2019
-
Indigenous
111.
IS 8422 (Part 4) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 4 napier oil scraper rings from 30 up to 200 mm nominal diameter N - Rings
September, 2019
-
Indigenous
112.
IS 8422 (Part 5) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 5 stepped oil scraper rings from 30 up to 200 mm nominal diameter Z - Rings
September, 2019
-
Indigenous
113.
IS 8422 (Part 6) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 6 slotted oil control rings from 50 up to 200 mm nominal diameter S - Rings
September, 2019
-
Indigenous
114.
IS 8422 (Part 7) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 7 double bevelled slotted oil control rings from 50 up to 200 mm nominal diameter G - Rings
September, 2019
-
Indigenous
115.
IS 8422 (Part 8) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 8 narrow land slotted oil control rings from 50 up to 200 mm nominal diameter D - Rings
September, 2019
-
Indigenous
116.
IS 8503 : 1986
Reviewed In : 2020
Technical supply conditions for aluminium alloy pistons for internal combustion engines First Revision
November, 2020
1
Indigenous
117.
IS/ISO 8528-1 : 2018

Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 1 Application Ratings and Performance First Revision
September, 2019
-
Identical under single numbering
118.
IS/ISO 8528-2 : 2018
ISO 8528-2:2018
Reciprocating internal combustion engine driven alternating current generating sets - Part 2 Engines
-
Identical under dual numbering
119.
IS/ISO 8528-3 : 2020
ISO 8528-3:2020
Reciprocating internal combustion engine driven alternating current generating sets Part 3 Alternating current generators for generating sets
-
120.
IS/ISO 8528-4 : 2005
Reviewed In : 2019
Reciprocating internal combustion engine driven alternating current generating sets Part 4 controlgear and switchgear
September, 2019
-
Identical under single numbering
121.
IS/ISO 8528-5 : 2018
ISO 8528-5 : 2018
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 5 Generating Sets First Revision
September, 2019
-
Identical under single numbering
122.
IS/ISO 8528-6 : 2005
Reviewed In : 2019
Reciprocating internal combustion engine driven alternating current generating sets Part 6 test methods
September, 2019
-
Identical under single numbering
123.
IS/ISO 8528-7 : 2017
ISO 8528-7 : 2017
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 7 Technical Declarations for Specification and Design First Revision
September, 2019
-
Identical under single numbering
124.
IS/ISO 8528-8 : 2016
ISO 8528-8 : 2016
Reciprocating internal combustion engine driven alternating current generating sets Part 8 requirements and tests for low - Power generating sets First Revision
-
-
Identical under single numbering
125.
IS/ISO 8528-9 : 2017
ISO 8528-9 : 2017
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 9 Measurement and Evaluation of Mechanical Vibrations First Revision
September, 2019
-
Identical under single numbering
126.
IS/ISO 8528-10 : 1998
ISO 8528-10 : 1998
Reviewed In : 2019
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 10 Measurement of Airborne Noise by the Enveloping Surface Method
September, 2019
-
Identical under dual numbering
127.
IS/ISO 8528-12 : 1997
ISO 8528-12 : 1997
Reviewed In : 2019
Reciprocating internal combustion engine driven alternating current generating sets Part 12 emergency power supply to safety services
September, 2019
-
Identical under single numbering
128.
IS 9262 : 1979
Reviewed In : 2020
Recommendations for gear positions for road vehicles
November, 2020
-
Indigenous
129.
IS 9418 : 1980
Reviewed In : 2020
Dimensions for mounting flanges for in - Line fuel injection pumps for multi - Cylinder compressiom ignition engines
November, 2020
-
Indigenous
130.
IS 9420 (Part 1) : 1988
Reviewed In : 2019
Specification for feed pumps for diesel fuel injection equipment Part 1 external dimensions First Revision
September, 2019
-
Indigenous
131.
IS 9420 (Part 2) : 1988
Reviewed In : 2019
Specification for feed pumps for diesel fuel injection equipment Part 2 types of drives
September, 2019
-
Indigenous
132.
IS 9465 : 1980
Reviewed In : 2020
Mounting dimensions for in - Line injection pump assemblies for fuel injection equipment for multi - Cylinder compression ignition engines
November, 2020
1
Indigenous

Standards Under Develpoment

Projects Approved

SI. No.
Doc No
TITLE
1
TED 2 (24458)
Revision of: IS 7347:1974
SMALL SIZE SPARK IGNITION ENGINES FOR AGRICULTURAL WATER PUMPS SPRAYERS TILLERS REAPERS AND OTHER SIMILAR APPLICATIONS PERFORMANCE SPECIFICATION First Revision

Preliminary Draft Standards

SI. No.
Doc No
TITLE
1
TED 2 (20797)
Revision of: IS 12025:1987
RECOMMENDATIONS FOR MEASUREMENT OF QUALITY CHARACTERISTICS FOR PISTONS
2
TED 2 (20906)
Revision of: IS 8422:1977
SPECIFICATION FOR PISTON RINGS FOR IC ENGINES PART 5 STEPPED OIL SCRAPER RINGS FROM 30 UP TO 200 mm NOMINAL DIAMETER Z-RINGS
3
TED 2 (20908)
Revision of: IS 8422:1977
SPECIFICATION FOR PISTON RINGS FOR IC ENGINES PART 7 DOUBLE BEVELED SLOTTED OIL CONTROL RING 50 TO 200MM NOMINAL DIAMETER G RINGS
4
TED 2 (20909)
Revision of: IS 8422:1977
SPECIFICATION FOR PISTON RINGS FOR IC ENGINES PART 8 NARROW GROUND SLOTTED OIL CONTROL RINGS 50 TO 200MM NOMINAL DIAMETER D RINGS
5
TED 2 (23099)
Revision of: IS 7611:1993
INTERNAL COMBUSTION ENGINES RADIATORS SPECIFICATION
6
TED 2 (23100)
Revision of: IS 13686:1993
Internal Combustion Engines Radiators Methods of Test
7
TED 2 (23120)
Revision of: IS 13687:1993
Internal Combustion Engines Radiators Heat Dissipation Performance Method Of Test
8
TED 2 (23237)
Revision of: IS 14273:1999
AUTOMOTIVE VEHICLES - EXHAUST EMISSIONS - GASEOUS POLLUTANTS FROM VEHICLES FITTED WITH COMPRESSION IGNITION ENGINES - METHOD OF MEASUREMENT First Revision
9
TED 2 (24347)
Revision of: IS 13051:1991
INTERNAL COMBUSTION ENGINES RADIATOR FANS SPECIFICATION First Revision
10
TED 2 (24442)
Revision of: IS 12996:1990
INTERNAL COMBUSTION ENGINES RADIATOR PRESSURE CAPS SPECIFICATION First Revision
11
TED 2 (24454)
Revision of: IS 13029:1991
INTERNAL COMBUSTION ENGINES SETTING IGNITION TIMING IN SPARK IGNITION ENGINES CODE OF PRACTICE First Revision
12
TED 2 (24461)
Revision of: IS 12460:1988
AUTOMOTIVE VEHICLES-TRANSMISSION SYSTEMS - MANUAL CONTROL SEQUENCE IN AUTOMATIC TRANSMISSIONS RECOMMENDATIONS First Revision

Drafts Standards in WC Stage

SI. No.
Doc No
TITLE
1
TED 2 (20896)
Revision of: IS 7449:1974
GLOSSARY OF TERMS FOR IC ENGINES PART 1 FUEL INJECTION EQUIPMENT

Draft Standards Completed WC Stage

SI. No.
Doc No
TITLE
1
TED 2 (16879)
Revision of: IS 14599:1999
Automotive power - Performance requirements Measurement of power sfc opacity of positive and compression ignition engine - Method of test
2
TED 2 (20894)
Revision of: IS 1543:1964
SINGLE CYLINDER FUEL INJECTION PUMPS SPECIFICATION Second Revision
3
TED 2 (20895)
Revision of: IS 3174:1974
PIPE UNION BOLT SPECIFICATION Second Revision
4
TED 2 (20898)
Revision of: IS 7657:1975
STARTER RING GEARS FOR INTERNAL COMBUSTION ENGINES PART 2 GEARS FOR AXIAL AND COAXIAL STARTERS SPECIFICATION First Revision
5
TED 2 (20900)
Revision of: IS 7657:1975
STARTER RING GEARS FOR INTERNAL COMBUSTION ENGINES PART 1 GEARS FOR INERTIA AND SOLENOID PRE-ENGAGED STARTERS SPECIFICATION First Revision
6
TED 2 (21508)
Revision of: IS 9262:1979
GEAR POSITIONS FOR ROAD VEHCILES RECOMMENDATIONS First Revision
7
TED 2 (24507)
INTERNAL COMBUSTION ENGINES PISTON RINGS PART 4 GENERAL SPECIFICATIONS
8
TED 2 (24508)
INTERNAL COMBUSTION ENGINES PISTON RINGS PART 5 QUALITY REQUIREMENTS
9
TED 2 (24509)
INTERNAL COMBUSTION ENGINES - PISTON RINGS PART 2 COIL-SPRING-LOADED OIL CONTROL RINGS OF NARROW WIDTH MADE OF CAST IRON
10
TED 2 (24510)
INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 3 COIL-SPRING-LOADED OIL CONTROL RINGS MADE OF STEEL
11
TED 2 (24511)
INTERNAL COMBUSTION ENGINES PISTON RINGS EXPANDER RAIL OIL-CONTROL RINGS
12
TED 2 (24548)
Revision of: IS 8422:1977
Internal Combustion Engines Piston Rings Part 1 Rectangular Rings Made of Cast Iron
13
TED 2 (24549)
Revision of: IS 8422:1977
Internal Combustion Engines Piston Rings Part 2 Rectangular Rings Made of Steel
14
TED 2 (24550)
Revision of: IS 8422:1977
Internal Combustion Engines Piston Rings Part 3 Keystone Rings Made of Steel
15
TED 2 (24551)
Internal Combustion Engines Piston Rings Part 1 Keystone Rings Made of Cast Iron
16
TED 2 (24552)
Revision of: IS 8422:1977
Internal Combustion Engines - Piston Rings - Scraper Rings Made of Cast Iron
17
TED 2 (24621)
Revision of: IS 8422:1977
Internal Combustion Engines - Piston Rings - Oil Control Rings
18
TED 2 (24622)
Internal Combustion Engines Piston Rings Part 2 Half Keystone Rings Made of Cast Iron
19
TED 2 (24623)
Internal Combustion Engines - Piston Rings - Part 4 Half Keystone Rings Made of Steel

Finalized Draft Indian Standard

SI. No.
Doc No
TITLE
No Records Found

Finalized Draft Indian Standards under Print

SI. No.
Doc No
TITLE
1
TED 2 (22709)
Revision of: IS 17458:2018
Reciprocating Internal Combustion Engines Fire Protection First Revision
2
TED 2 (23613)
Revision of: IS/ISO 8528:2018
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS PART 5 GENERATING SETS Second Revision
3
TED 2 (23614)
Revision of: IS/ISO 8528:1998
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 10 Measurement of Airborne Noise First Revision
4
TED 2 (23615)
Revision of: IS/ISO 8528:1997
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS PART 12 EMERGENCY POWER SUPPLY TO SAFETY SERVICES First Revision


Aspect Wise Report

 
 Product:   70
 Code of Practices :    7
 Methods of Test :   39
 Terminology :   7
 Dimensions :   7
 System Standard :   0
 Safety Standard :   1
 Others :    1
 Service Specification :    0
 Process Specification :    0
 Unclassified :    0
 


Annexure-I :List of Indian Standards Withdrawn/Superseded

TED 2 : Automotive Primemovers, Transmission Systems and Internal Combustion Engine

SI. No.
IS No.
Title
1.
IS 10003 : 1988
Reviewed In : 1997
Compression Ignition Diesel Engines For Automotive Application
2.
IS 10004 : 1981
Reviewed In : 1996
Performance Requirements for Spark Ignition Engines for Automotive Purposes
3.
IS 11509 (Part 6) : 2006
ISO 4548-5
Reviewed In : 2016
Methods of test for full - Flow lubricating oil filters for internal combustion engines Part 6 cold start simulation and hydraulic pulse durability test First Revision
4.
IS 12022 : 1987
Reviewed In : 2007
Methods of Testing of Quality Characteristics for Piston Rings
5.
IS 12969 : 1990
Reviewed In : 2009
Internal Combustion Engines - Methods of Test for Quality Characteristics of Valves
6.
IS 12971 : 1990
ISO 7706
Reviewed In : 2016
Road vehicles - Commercial vehicles clearance envelope for power take - Offs PTO
7.
IS 14511 : 1998
Reviewed In : 2007
Automotive Vehicles - Testing of fuel Injectors - Hand Lever Testing Apparatus
8.
IS 14555 : 1998
Reviewed In : 2007
Automotive Vehicles - Evaporative Emissions from Vehicles Equipped with Spark Ignition Engines - Method of Measurement
9.
IS 14556 : 1998
Reviewed In : 2007
Automotive Vehicles - Catalytic Converters for Spark Ignition Engines - Installed Requirements
10.
IS 1600 : 1960
Code For Type Testing Of Constant Speed Internal Combustion Engines For General Purpose
11.
IS 1601 : 1960
Performance of constant speed internal combustion engines for general purposes
12.
IS 1602 : 1960
Code for type testing of variable speed internal combustion engines for automotive purposes
13.
IS 1603 : 1960
Performance of variable-speed internal combustion engines for automotive purpose
14.
IS 3511 : 1966
Cylinder bore diameters for internal combustion engines
15.
IS 7451 (Part 3) : 1974
Reviewed In : 1999
Reciprocating Internal Combustion Engines - Part III Definition of Right-Hand and Left-Hand Single Bank Engines
16.
IS 7451 (Part 4) : 1974
Reviewed In : 1999
Reciprocating Internal Combustion Engines - Part IV Designation of Direction of Rotation
17.
IS 7451 (Part 5) : 1974
Reviewed In : 1999
Reciprocating Internal Combustion Engines - Part V Designation of the Cylinders
18.
IS 8422 (Part 9) : 1986
Reviewed In : 2009
Piston rings for lC engines Part 9 Terms and Definitions

Annexure-II:List of Indian Product Standards

TED 2:Automotive Primemovers, Transmission Systems and Internal Combustion Engine

SI. No.
IS No. & Year
Title
1.
IS 10001 : 1981
ISO 3046
Reviewed In : 2021
Performance Requirements for Constant Speed Compression ignition diesel engines for general purposes up to 20 kW
2.
IS H10001 : 1981
ISO 3046
Reviewed In : 2021
Specification for performance requirements for constant speed compression ignition Diesel engines for general purposes Up To 20 Kw
3.
IS 10002 : 1981
ISO 3046
Reviewed In : 2021
Specification for performance requirements for constant speed compression ignition Diesel engines for general purposes Above 20 KW
4.
IS 10105 : 1982
Reviewed In : 2019
Specification for fittings for cylinder pressure indicators for internal combustion engines
5.
IS 10323 : 2019

Crank and chain wheel for moped - Specification First Revision
6.
IS 10533 : 1983
Reviewed In : 2019
Specification for valve guides for internal combustion engines
7.
IS 10651 : 2019

Hub axle front for moped - Specification First Revision
8.
IS 10652 : 2019

Pedal assembly for moped - Specification First Revision
9.
IS 10653 : 2019

Hub axle rear for moped - Specification First Revision
10.
IS 11139 : 2019

Adjusters for control cables for moped - Specification First Revision
11.
IS 11170 : 1985
ISO 3046
Reviewed In : 2021
Specification for 1 performance requirements for constant speed compression ignition Diesel engines for agricultural purposes Up To 20 KW
12.
IS 12352 : 1988
Reviewed In : 2019
Specification for fuel injection pump mounting bolts
13.
IS 12404 : 1988
Reviewed In : 2019
Specification for couplings for driving fuel injection pumps
14.
IS 12455 : 1988
Reviewed In : 2019
Performance requirements of aircooled spark ignition automotive engines
15.
IS 12460 : 1988
Reviewed In : 2019
Automotive vehicles - Transmission systems - Manual control sequence in automatic transmissions - Recommendations
16.
IS 12499 : 1988
Reviewed In : 2019
Specification for two stage 0 5 litre diesel fuel filters
17.
IS 12500 : 1988
Reviewed In : 2019
Specification for 0 2 litre diesel fuel filters
18.
IS 12535 (Part 2) : 1991
Reviewed In : 2021
Automotive vehicles - Transmission systems - Glonssary Part 2 universal joints and driveshafts
19.
IS 12902 : 1990
ISO 7646
Reviewed In : 2021
Commercial vehicles and buses - Gearbox flanges - Type A
20.
IS 12903 : 1990
ISO 7647
Reviewed In : 2021
Commercial vehicles and buses - Gearbox flanges - Type S
21.
IS 12905 : 1990
ISO 7653
Reviewed In : 2021
Commercial Vehicles-couplings Between Power Take-offs PTO s and Ancillary Driven Units
22.
IS 12972 : 1990
ISO 7707
Reviewed In : 2021
Commercial road vehicles - Connections for rear - Mounted power take - Offs PTO
23.
IS 12973 : 1990
ISO 7804
Reviewed In : 2021
Commercial road vehicles - Side openings for truck power take - Offs PTO
24.
IS 12978 : 2006
ISO 8667
Reviewed In : 2020
Commercial vehicles and buses - Cross - Tooth gearbox flanges type T First Revision
25.
IS 12996 : 1990
Reviewed In : 2019
Internal combustion engines radiator pressure caps - Specification
26.
IS 13016 : 1991
Reviewed In : 2020
Internal combustion engines - Radiator drain cocks - Specification
27.
IS 13050 : 1991
Reviewed In : 2020
Internal combustion engines - Valve seat inserts - Specification
28.
IS 13051 : 1991
Reviewed In : 2020
Internal combustion engines radiator fans - Specification
29.
IS 13052 : 1991
Reviewed In : 2020
Internal combustion engines - Cylinder liners - Quality characteristics
30.
IS 1543 : 1964
Reviewed In : 2023
Specification for single cylinder fuel injection pumps Revised
31.
IS 16057 : 2013
Reviewed In : 2018
Lpg operated internal combustion engines - Safety and performance requirements - Specification
32.
IS 17019 : 2018

Gear gerotor oil pump for motorcycle scooter moped - Specification
33.
IS 2765 : 1982
Reviewed In : 2020
Specification for radiator hose First Revision
34.
IS 3169 : 1991
Reviewed In : 2020
Internal combustion engines - Two stage one litre diesel fuel filters First Revision
35.
IS 3170 (Part 1) : 2006
ISO 2697
Reviewed In : 2020
Internal Combustion Engines - Fuel Injection Nozzles Part 1 Injection Nozzles - Size S
36.
IS 3170 (Part 2) : 2006
ISO 4010
Reviewed In : 2020
Internal combustion engines - Fuel injection nozzles Part 2 calibrating nozzle delay pintle type First Revision
37.
IS 3171 (Part 1) : 1997
ISO 2699
Reviewed In : 2021
Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 1 Flange Mounted Fuel Injectors Size S Types 2 3 4 5 and 6
38.
IS 3171 (Part 2) : 2006
ISO 7026
Reviewed In : 2021
Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 2 Screw-in Injection Nozzle Holders Types 20 21 21 1 and 27 for Pintle Nozzle Size S Type B
39.
IS 3171 (Part 3) : 1997
ISO 7030
Reviewed In : 2021
Internal combustion engines - Fuel injection nozzle holders Part 3 screw mounted injection nozzle holders types 12 13 14 15 16 17 18 and 19
40.
IS 3172 : 1997
Reviewed In : 2021
Internal combustion engines - Fuel injection equipment - Single and double ended pipe unions Single And Double Ended Banjo - Specification Second Revision
41.
IS 3173 : 1965
Reviewed In : 2022
Specification for high pressure connections for fuel injection equipment for diesel engines
42.
IS 3174 : 1974
Reviewed In : 2023
Specification for pipe union bolt First Revision
43.
IS 3175 : 2013
Reviewed In : 2018
Internal combustion engine - Sealing washers for pipe unions - Specification Second Revision
44.
IS 3649 : 2018

Automotive vehicles - Clutch facing for automotive transmission - Specification First Revision
45.
IS 4530 : 2006
Reviewed In : 2020
GeneraL requirements for positioning and routing of engine exhaust pipes in motor vehicles First Revision
46.
IS 5791 : 2006
ISO 6621-3
Reviewed In : 2020
Internal combustion engines - Piston rings - Material specifications Third Revision
47.
IS 6740 : 1985
Reviewed In : 2020
Specification for gudgeon pins for internal combustion engines First Revision
48.
IS 6750 : 1985
Reviewed In : 2020
Specification for cylinder liners for internal combustion engines First Revision
49.
IS 7347 : 1974
Reviewed In : 2021
SPECIFICATION FOR PERFORMANCE OF SMALL SIZE SPARK IGNITION ENGINES FOR AGRICULTURAL WATER PUMPS SPRAYERS TILLERS REAPERS AND OTHER SIMILAR APPLICATIONS
50.
IS 7451 (Part 6) : 2007
ISO 2261
Reviewed In : 2017
Reciprocating internal combustion engines Part 6 hand - Operated control devices - Standard direction of motion First Revision
51.
IS 7611 : 1993
Reviewed In : 2019
Internal combustion engines radiators - Specification First Revision
52.
IS 7657 (Part 1) : 1975
Reviewed In : 2023
Specification for starter ring gears for internal combustion engines Part 1 gears for inertia and solenoid pre - Engaged starters
53.
IS 7657 (Part 2) : 1975
Reviewed In : 2019
Specification for starter ring gears for internal combustion engines Part 2 gears for axial and coaxial starters
54.
IS 810 : 1991
Reviewed In : 2020
Internal combustion engines - Engine valves - Specification Second Revision
55.
IS 8422 (Part 1) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 1 plain compression rings from 30 up to 200 mm nominal diameter R - Rings
56.
IS 8422 (Part 2) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 2 taper faced compression rings from 30 up to 200 mm nominal diameter M - Rings
57.
IS 8422 (Part 3) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 3 keystone rings from 82 up to 200 mm nominal diameter T - Rings 15
58.
IS 8422 (Part 4) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 4 napier oil scraper rings from 30 up to 200 mm nominal diameter N - Rings
59.
IS 8422 (Part 5) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 5 stepped oil scraper rings from 30 up to 200 mm nominal diameter Z - Rings
60.
IS 8422 (Part 6) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 6 slotted oil control rings from 50 up to 200 mm nominal diameter S - Rings
61.
IS 8422 (Part 7) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 7 double bevelled slotted oil control rings from 50 up to 200 mm nominal diameter G - Rings
62.
IS 8422 (Part 8) : 1977
Reviewed In : 2019
Specification for piston rings for IC engines Part 8 narrow land slotted oil control rings from 50 up to 200 mm nominal diameter D - Rings
63.
IS/ISO 8528-1 : 2018

Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 1 Application Ratings and Performance First Revision
64.
IS/ISO 8528-2 : 2018
ISO 8528-2:2018
Reciprocating internal combustion engine driven alternating current generating sets - Part 2 Engines
65.
IS/ISO 8528-4 : 2005
Reviewed In : 2019
Reciprocating internal combustion engine driven alternating current generating sets Part 4 controlgear and switchgear
66.
IS/ISO 8528-5 : 2018
ISO 8528-5 : 2018
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 5 Generating Sets First Revision
67.
IS/ISO 8528-7 : 2017
ISO 8528-7 : 2017
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 7 Technical Declarations for Specification and Design First Revision
68.
IS/ISO 8528-8 : 2016
ISO 8528-8 : 2016
Reciprocating internal combustion engine driven alternating current generating sets Part 8 requirements and tests for low - Power generating sets First Revision
69.
IS/ISO 8528-12 : 1997
ISO 8528-12 : 1997
Reviewed In : 2019
Reciprocating internal combustion engine driven alternating current generating sets Part 12 emergency power supply to safety services
70.
IS 9420 (Part 2) : 1988
Reviewed In : 2019
Specification for feed pumps for diesel fuel injection equipment Part 2 types of drives