Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Group : Measuring and related equipments )
Total Standards : 570
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10086 : 2021/ISO 3765:1998 (1 Revision) |
Moulds for Use in Tests of Cement, Concrete and Pozzolana (First Revision) | 2 | ---- | Buy | |
| 2 | IS 10216 : 1988/ISO 228-2 : 1987 (1 Revision) |
Pipe threads where pressure - Tight joints are not made on the threads - Verification by means of limit gauges (First Revision) | 0 | ---- | Buy | |
| 3 | IS 10236 : Part 3 : 1982 |
Procedure for basic climatic and durability tests for optical instruments: Part 3 cold test | 0 | ---- | Download | |
| 4 | IS 10236 : Part 11 : 1985 |
Procedure for basic climatic and durability tests for optical instruments: Part 11 vibration test | 0 | ---- | Download | |
| 5 | IS 10236 : Part 10 : 1985 |
Procedure for basic climatic and durability tests for optical instruments: Part 10 bump test | 0 | ---- | Download | |
| 6 | IS 10236 : Part 6 : 1982 |
Procedure for basic climatic and durability tests for optical instruments: Part 6 salt mist test | 0 | ---- | Download | |
| 7 | IS 10236 : Part 17 : 1988 |
Procedure for basic climatic and durability tests for optical instruments: Part 17 acceleration (Steady - State) test | 0 | ---- | Download | |
| 8 | IS 10236 : Part 14 : 1986 |
Procedure for basic climatic and durability tests for optical instruments: Part 14 driving rain test | 0 | ---- | Download | |
| 9 | IS 10236 : Part 2 : 1982 |
Procedure for climatic and durability tests for optical instruments: Part 2 dry heat test | 0 | ---- | Download | |
| 10 | IS 10236 : Part 9 : 1983 |
Procedure for basic climatic and durability tests for. optical instruments: Part 9 low air pressure (Altitude) test | 0 | ---- | Download | |
| 11 | IS 10236 : Part 1 : 1989 |
Procedure for basic climatic and durability tests for optical instruments: Part 1 general | 0 | ---- | Download | |
| 12 | IS 10236 : Part 5 : 1982 |
Procedure for basic climatic and durability tests for optical instruments: Part 5 damp heat (Cyclic) test | 0 | ---- | Download | |
| 13 | IS 10236 : Part 16 : 1988 |
Procedure for basic climatic and durability tests for optical instruments part 16 solar radiation test | 0 | ---- | Download | |
| 14 | IS 10236 : Part 12 : 1985 |
Procedure for basic climatic and durability tests for optical instruments: Part 12 shock test | 0 | ---- | Download | |
| 15 | IS 10236 : Part 8 : 1983 |
Procedure for basic climatic and durability tests for optical instruments: Part 8 thermal shock (Rapid Change Of Temperature) test | 0 | ---- | Download | |
| 16 | IS 10236 : Part 4 : 1982 |
Procedure for basic climatic and durability for optical instruments: Part 4 damp heat test | 0 | ---- | Download | |
| 17 | IS 10236 : Part 15 : 1986 |
Procedure for basic climatic and durability tests for optical instruments: Part 15 drop test | 0 | ---- | Download | |
| 18 | IS 10236 : Part 13 : 1986 |
Procedure for basic climatic and durability tests for optical instruments: Part 13 dust test | 0 | ---- | Download | |
| 19 | IS 10236 : Part 7 : 1983 |
Procedure for basic climatic and durability tests for optical instruments .: Part 7 mould growth test | 0 | ---- | Download | |
| 20 | IS 10236 : Part 18 : 1988 |
Procedure for basic climatic and durability tests for optical instruments: Part 18 sealing test | 0 | ---- | Download | |
| 21 | IS 10275 : 1982 |
Methods For Assessment of circularity Error From Polar Graphs Obtained By Using Stylus-Type Form-Measuring Instrument | 0 | ---- | Download | |
| 22 | IS 10361 : 1983 |
Classification of wrist watch cases | 0 | ---- | Download | |
| 23 | IS 10362 : 1982 |
Dimensions for threads for back cover and bezel for watch cases | 0 | ---- | Download | |
| 24 | IS 10363 : 1982 |
Dimensions for fixing devices for threaded back covers for watch cases | 0 | ---- | Download | |
| 25 | IS 10364 : 2001 (1 Revision) |
Snap type back covers and bezel for watch cases -- Dimensions (First Revision) | 0 | ---- | Download | |
| 26 | IS 10365 : 1982 |
Dimensions for packing ring and housing for back cover joint for watch cases | 0 | ---- | Download | |
| 27 | IS 10366 : 1995 (1 Revision) |
Watch cases -- Crystal and dial opening diameters -- Dimensions (First Revision) | 0 | ---- | Download | |
| 28 | IS 10367 : 1983 |
Dimensions for crystal and dial openings (shaped or circular) for watch cases | 0 | ---- | Download | |
| 29 | IS 10368 : 1983 |
Dimensions for movement holders for watch cases | 0 | ---- | Download | |
| 30 | IS 10483 : 1983/ISO/DIS 7806 |
Code For Designating Perforations Of Industrial Plate Sieves (identical With Iso/dis 7806) | 0 | ---- | Buy | |
| 31 | IS 1058 : 1993 (2 Revision) |
Legal metrology - Commercial capacity measures - Specification (Second Revision) | 0 | ---- | Download | |
| 32 | IS 10587 : 1983 |
Terminology for screw threads | 0 | ---- | Download | |
| 33 | IS 1059 : 1994 (1 Revision) |
Legal metrology - Commercial length measures (Non - Flexible) - Specification (First Revision) | 0 | ---- | Download | |
| 34 | IS 10649 : 1983 |
Specification for ring gauges for drill chuck taper arbors of morse taper and jacob taper type | 0 | ---- | Download | |
| 35 | IS 10679 : 1983 |
Specificati - On for photoelectric spectrophotometer (Single Beam Type) | 0 | ---- | Download | |
| 36 | IS 10685 : 1983 |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range Above M120 up to and including M200) | 0 | ---- | Download | |
| 37 | IS 10695 : 1983 |
Specification for pocket stereoscope | 0 | ---- | Download | |
| 38 | IS 10711 : 2001/ISO 5457 : 1999 (1 Revision) |
Technical product documentation -- Sizes and layout of drawing sheets (First Revision) | 1 | ---- | Buy | |
| 39 | IS 10712 : 2018/ISO 6433 : 2012 (1 Revision) |
Technical product documentation -- Part references (First Revision) | 0 | ---- | Buy | |
| 40 | IS 10713 : 1983/ISO 5455 : 1979 |
Scales for use on technical drawings (ISO Title : Technical Drawings -- Scales) | 0 | ---- | Buy | |
| 41 | IS 10714 : Part 15 : 2019/ISO 128-71:2010 |
Technical Product Documentation (TPD) -- General principles of presentation: Part 15 Presentation of shipbuilding drawings | 0 | ---- | Buy | |
| 42 | IS 10714 : Part 71 : 2019/ISO 128-15:2013 |
Technical product documentation (TPD) -- General principles of presentation: Part 71 Simplified representation for mechanical engineering drawings | 0 | ---- | Buy | |
| 43 | IS 10715 : Part 2 : 1999/ISO 6410-2 : 1993 (1 Revision) |
Technical drawings -- Screw threads and threaded parts: Part 2 Screw thread inserts | 0 | ---- | Buy | |
| 44 | IS 10715 : Part 1 : 1999/ISO 6410-1 : 1993 (1 Revision) |
Technical drawings -- Screw threads and threaded parts: Part 1 General conventions (First Revision) | 0 | ---- | Buy | |
| 45 | IS 10716 : Part 2 : 1999/ISO 2162-2 : 1993 |
Technical product documentation -- Springs: Part 2 Presentation of data for cylindrical helical compression springs | 0 | ---- | Buy | |
| 46 | IS 10716 : Part 3 : 2015/ISO 26909 : 2009 (1 Revision) |
Technical product documentation -- Springs: Part 3 Vocabulary (First Revision) | 0 | ---- | Buy | |
| 47 | IS 10716 : Part 1 : 1999/ISO 2162-1 : 1993 (1 Revision) |
Technical product documentation -- Springs: Part 1 Simplified representation (First Revision) | 0 | ---- | Buy | |
| 48 | IS 10720 : 1999/ISO 5261 : 1995 (1 Revision) |
Technical drawings -- Simplified representation of bars and profile sections (First Revision) | 0 | ---- | Buy | |
| 49 | IS 10722 : Part 1 : 1983/ISO 3952-1 : 1981 |
Graphical symbols for elements of kinematic diagrams: Part 1 | 0 | ---- | Buy | |
| 50 | IS 10722 : Part 4 : 1985/ISO 3952-4 : 1984 |
Graphical symbols for elements of kinematic diagrams: Part 4 | 0 | ---- | Buy | |
| 51 | IS 10722 : Part 3 : 1983/ISO 3952-3 : 1979 |
Graphical symbols for kinematic diagrams: Part 3 | 0 | ---- | Buy | |
| 52 | IS 10722 : Part 2 : 1983/ISO 3952-2 : 1981 |
Graphical symbols for elements of kinematic diagrams: Part 2 | 0 | ---- | Buy | |
| 53 | IS 1076 : Part 3 : 1985/ISO 497 : 1973 (2 Revision) |
Preferred numbers: Part 3 guide to the choice of series of preferred numbers and of series containlng more rounded values of preferred numbers (Second Revision) | 0 | ---- | Buy | |
| 54 | IS 1076 : Part 2 : 1985/ISO 17 : 1973 (2 Revision) |
Preferred numbers: Part 2 guide to the use of preferred numbers and series of preferred numbers | 0 | ---- | Buy | |
| 55 | IS 1076 : Part 1 : 1985/ISO 3 : 1973 (2 Revision) |
Preferred numbers: Part 1 series of preferred numbers (Second Revision) | 0 | ---- | Buy | |
| 56 | IS 10863 : 1984 |
Specification for one day alarm clocks | 0 | ---- | Download | |
| 57 | IS 10865 : 1998 (1 Revision) |
Wrist watches -- Spring bars for watch cases and straps -- Specification (First Revision) | 0 | ---- | Download | |
| 58 | IS 10968 : 1984 |
Drawing practice for simplified presentation | 0 | ---- | Download | |
| 59 | IS 10995 : 1984 |
Specification for tuning fork | 0 | ---- | Download | |
| 60 | IS 10996 : 1984 |
Specification For Stop Clock With Fly-Back Action | 1 | ---- | Download | |
| 61 | IS 1105 : 1957 |
Method for precise conversion of inch and metric dimensions to ensure interchangeability | 0 | ---- | Download | |
| 62 | IS 11103 : 1984 |
Specification for cylindrical measuring pins (Size Range From 0.1 mm up to and including 20 mm) | 0 | ---- | Download | |
| 63 | IS 11152 : 1984 |
Specification for laboratory stands (Metallic) | 0 | ---- | Download | |
| 64 | IS 11154 : Part 4 : 1994 (1 Revision) |
Nameplates -- Dimensions: Part 4 Elliptical and segmental nameplates (First Revision) | 0 | ---- | Download | |
| 65 | IS 11154 : Part 3 : 1994 (1 Revision) |
Nameplates -- Dimensions: Part 3 Triangular nameplates (First Revision) | 0 | ---- | Download | |
| 66 | IS 11154 : Part 2 : 1994 (1 Revision) |
Nameplates -- Dimensions: Part 2 Circular nameplates (First Revision) | 0 | ---- | Download | |
| 67 | IS 11439 : 1985 |
Dimensions for fixing watch hands | 0 | ---- | Download | |
| 68 | IS 11444 : 1985 |
Specification for grinding and polishing materials for optical components | 0 | ---- | Download | |
| 69 | IS 11562 : 1985 |
Specification for O-rings for wrist watch crowns and push buttons | 1 | ---- | Download | |
| 70 | IS 1160 : 1993 (1 Revision) |
Metric dispensing measures - Specification (First Revision) | 1 | ---- | Download | |
| 71 | IS 11663 : 1986 |
Conventional representations of common features and materials on technical drawings | 0 | ---- | Download | |
| 72 | IS 11664 : 1986 |
Folding of drawing prints | 0 | ---- | Download | |
| 73 | IS 11665 : 2010/ISO 7200 : 2004 |
Technical product documentation -- Data fields in title blocks and document headers (First Revision) | 0 | ---- | Buy | |
| 74 | IS 11666 : 2015/ISO 7573 : 2008 (1 Revision) |
Technical product documentation -- Parts lists (First Revision) | 0 | ---- | Buy | |
| 75 | IS 11668 : 1985/ISO 6411 : 1982 |
Technical drawings -- Simplified representation of centre holes | 0 | ---- | Buy | |
| 76 | IS 11669 : 1986/ISO 129 : 1985 |
General principles of dimensioning on technical drawings | 0 | ---- | Buy | |
| 77 | IS 11670 : 1993 (1 Revision) |
Technical drawings -- Abbreviations and symbols for use in technical drawings (First Revision) | 0 | ---- | Download | |
| 78 | IS 11681 : 2015/ISO 6426- 2 : 2002 (1 Revision) |
Horological vocabulary -- Technical and commercial definitions (First Revision) | 0 | ---- | Buy | |
| 79 | IS 1177 : 2022/ISO 16610-40 : 2015 (3 Revision) |
OIL OF VETIVER CULTIVATED AND KHUS SPECIFICATION | 0 | ---- | Buy | |
| 80 | IS/ISO/IEC 11770 : Part 7 : 2021/12123 |
Information Security - Key Management Part 7: Cross-Domain Password-Based Authenticated Key Exchange | 0 | ---- | Buy | |
| 81 | IS 11875 : 1986 |
Specification for diffuse pyranometer | 1 | ---- | Download | |
| 82 | IS 11876 : 1986 |
Specification for airmeter | 0 | ---- | Download | |
| 83 | IS 11961 : 1986 |
Specification for 4 - Metre levelling staff (Telescopic) | 0 | ---- | Download | |
| 84 | IS 11999 : 2022/ISO 9186-3 : 2014 (2 Revision) |
METALLIC MATERIALS SHEET AND STRIP DETERMINATION OF PLASTIC STRAIN RATIO (Second Revision) | 0 | ---- | Buy | |
| 85 | IS 12114 : Part 1 : 2018/ISO 3160-1 : 1998 (1 Revision) |
Watch-Cases and accessories -- Gold alloy coverings: Part 1 General requirements (First Revision) | 0 | ---- | Buy | |
| 86 | IS 12114 : Part 2 : 2018/ISO 3160-2:2015 (1 Revision) |
Watch-Cases and accessories -- Gold alloy coverings: Part 2 Determination of fineness, thickness, corrosion resistance and adhesion (First Revision) | 0 | ---- | Buy | |
| 87 | IS 12150 : 2023/ISO 10110-14:2018 (1 Revision) |
Textiles - Method for Determination of Strength of Disperse Acetate Dyes by Exhaust Dyeing (First Revision) | 0 | ---- | Buy | |
| 88 | IS 12160 : 2015/ISO 8015 : 2011 (1 Revision) |
Geometrical product specifications (GPS) -- Fundamentals --Concepts, principles and rules (First Revision) | 0 | ---- | Buy | |
| 89 | IS 12186 : 1987 |
Tolerances for ISO - vietric trapezoidal screw threads for lead and feed screw assemblies | 0 | ---- | Download | |
| 90 | IS 12257 : Part 2 : 1992 |
Pneumatic measurement: Part 2 design features of instruments working in high pressure range | 0 | ---- | Download | |
| 91 | IS 12257 : Part 5 : 1996 |
Pneumatic measurement: Part 5 glossary of terms and definition | 0 | ---- | Download | |
| 92 | IS 12257 : Part 1 : 1987 |
Specification for pneumatic length measurement comparators: Part 1 general information on principles and methods | 1 | ---- | Download | |
| 93 | IS 12257 : Part 4 : 1992 |
Pneumatic measurement - Specification: Part 4 general information and examples of application | 0 | ---- | Download | |
| 94 | IS 12257 : Part 3 : 1992 |
Pneumatic measurement: Part 3 parameters of instruments working on high pressure | 0 | ---- | Download | |
| 95 | IS 12471 : 1988 |
Dimensions for lengths of hands for clocks | 0 | ---- | Download | |
| 96 | IS 12472 : 1988 |
Connecting dimensions, fits and dimension combinations of hands for clock | 0 | ---- | Download | |
| 97 | IS 12477 : 1988 |
Specification for bushing for clock hands | 0 | ---- | Download | |
| 98 | IS 12510 : 1988 |
Specification for wall clocks (battery operated) | 0 | ---- | Download | |
| 99 | IS 12586 : 2021/ISO 128-2:2022 (1 Revision) |
Brazed low carbon steel gas cylinders not exceeding 13 litre water capacity Specification | 0 | ---- | Buy | |
| 100 | IS 1269 : Part 2 : 1997 |
Legal metrology - Material measures of length: Part 2 steel tape measures | 1 | ---- | Download | |
| 101 | IS 1269 : Part 1 : 1997 (2 Revision) |
Leagal metrology - Material measures of length: Part 1 woven metallic and glass fiber tape measures (Second Revision) | 1 | ---- | Download | |
| 102 | IS 12713 : 1989 |
Optical instruments - Permissible cosmetic defects and inspection of optical components | 0 | ---- | Download | |
| 103 | IS 12745 : Part 1 : 1988/ISO 6426-1 : 1982 |
Horological vocabulary: Part 1 Technical and scientific definitions | 0 | ---- | Buy | |
| 104 | IS 12781 : 1989 |
Marine bucket for sea surface temperature measurement - Specification | 0 | ---- | Download | |
| 105 | IS 12874 : 1989 |
Optical and mathematical instruments - Telescopic alidade - specification | 0 | ---- | Download | |
| 106 | IS 12888 : 1989 |
Optical and mathematical instruments - Short range infrared distance measuring instruments specification | 0 | ---- | Download | |
| 107 | IS 12937 : 1990 |
Engineering metrology - Methods of testing straightness, flatness and perpendicularity | 1 | ---- | Download | |
| 108 | IS 13130 : Part 2 : 1991 |
Wrist watches and watch movements -- Specification: Part 2 Quartz electronic watches | 0 | ---- | Download | |
| 109 | IS 13130 : Part 1 : 1991 |
Wrist watches and watch movements -- Specification: Part 1 Mechanical watches | 0 | ---- | Download | |
| 110 | IS 13360 : Part 11 : Sec 10 : 2022/ISO 15519-2 : 2015 (1 Revision) |
PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 10 RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS DETERMINATION OF APPARENT VISCOSITY USING A SINGULAR CYLINDER TYPE ROTATIONAL VISCOMETER METHOD | 0 | ---- | Buy | |
| 111 | IS 13360 : Part 6 : Sec 3 : 2022/ISO 16016 : 2016 (3 Revision) |
PLASTICS METHOD OF TESTING PART 6 THERMAL PROPERTIES SECTION 3 DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD GENERAL TEST METHOD | 0 | ---- | Buy | |
| 112 | IS 13436 : 1992 |
Sensitive anemometer - Specification | 0 | ---- | Download | |
| 113 | IS 13448 : 1992 |
Meteorology - Thermoelectric Pyrheliometer - Specification | 0 | ---- | Download | |
| 114 | IS 13459 : 1992 |
Angstrom Pyrheliometer - Specification | 0 | ---- | Download | |
| 115 | IS 13638 : Part 2 : 1993/ISO 9222-2 : 1989 |
Technical drawings -- Seals for dynamic application: Part 2 Detailed simplified representation | 0 | ---- | Buy | |
| 116 | IS 13638 : Part 1 : 1993/ISO 9222-1 : 1989 |
Technical drawings -- Seals for dynamic application: Part 1 General simplified representation | 0 | ---- | Buy | |
| 117 | IS 1367 : Part 14 : Sec 1 : 2023/11455 (5 Revision) |
Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless Steel Fasteners Section 1 Bolts screws and studs with specified grades and property classes (Fifth Revision of IS 1367(Part 14 Sec 1)) | 0 | ---- | Buy | |
| 118 | IS 13718 : Part 2 : 1993 |
Horology -- Watch straps: Part 2 Stainless steel -- Specification | 0 | ---- | Download | |
| 119 | IS 13718 : Part 1 : 1993 |
Horology -- Watch straps: Part 1 Leather straps -- Specification | 0 | ---- | Download | |
| 120 | IS 13718 : Part 3 : 2002 |
Horology -- Watch straps: Part 3 Solid link straps -- Specification | 0 | ---- | Download | |
| 121 | IS 13907 : 1994/ISO 7863 : 1984 |
Height setting micrometers and rising blocks - Specification | 0 | ---- | Buy | |
| 122 | IS 1399 : 1959 |
Glossary of terms used in optical technology | 1 | ---- | Download | |
| 123 | IS 1423 : 2022 (3 Revision) |
Textiles � Cotton Gaberdine � Specification (third revision) | 0 | ---- | Download | |
| 124 | IS 14260 : 1995/ISO 9385 |
Glass and glass - Ceramics - Knoop hardness test | 0 | ---- | Buy | |
| 125 | IS 14271 : 1995 |
Engineering metrology - Dial snap gauges - Specification | 0 | ---- | Download | |
| 126 | IS 1433 : 1990 (2 Revision) |
Beam scales - Specification (Second Revision) | 0 | ---- | Download | |
| 127 | IS 14338 : 1996 |
Basic and design profile of screw threads for watch bezel and back covers | 0 | ---- | Download | |
| 128 | IS 14339 : 1996 |
Horology -- Watch bezel and back cover gauges -- Technical supply conditions -- General | 0 | ---- | Download | |
| 129 | IS 1434 : 1959 |
Specification for counter machines | 0 | ---- | Download | |
| 130 | IS 14355 : 2022/ISO 17450-3:2016 (1 Revision) |
Zinc dust pigment for paints - Specification (First Revision) | 0 | ---- | Buy | |
| 131 | IS 14365 : 1996 |
Horology -- Gauges for watch bezel and back covers -- Dimensions and tolerances | 0 | ---- | Download | |
| 132 | IS 14412 : 1996 |
Technical drawings -- Indication for revision of drawings | 0 | ---- | Download | |
| 133 | IS 14439 : Part 1 : 1997 |
Legal metrology - Gas volume meters: Part 1 general requirements | 1 | ---- | Download | |
| 134 | IS 14439 : Part 2 : 1998 |
Leagal metrology - Gas volume meters: Part 2 diaphagm gas meters | 3 | ---- | Download | |
| 135 | IS 1444 : 1989 (2 Revision) |
Engineers Pattern Drawing Boards - Specification (Second Revision) | 0 | ---- | Download | |
| 136 | IS 14558 : 1998/ISO/DIS 14882 : 1996 |
Horology -- Primary batteries -- Watch batteries | 0 | ---- | Buy | |
| 137 | IS 14560 : Part 2 : 1998 |
Horology -- Mineral and sapphire glass for wrist watch cases: Part 2 Gasket dimensions, material and test procedures -- Specification | 0 | ---- | Download | |
| 138 | IS 14560 : Part 1 : 1998 |
Horology -- Mineral and sapphire glass for wrist watch cases: Part 1 Dimensions, material and test procedures -- Specification | 0 | ---- | Download | |
| 139 | IS 14633 : 1999 |
Blackboards for class rooms - Specification | 0 | ---- | Download | |
| 140 | IS 14722 : 2016/ISO 10135 : 2007 |
Geometrical product specifications (GPS) -- Drawing indications for moulded parts in technical product documentation (TPD) (First Revision) | 0 | ---- | Buy | |
| 141 | IS 1480 : 1970 (1 Revision) |
Specification metric scales for general purposes (First Revision) | 2 | ---- | Download | |
| 142 | IS 14820 : Part 3 : 2016/ISO/TR 11146-3 : 2004 |
Lasers and laser - Related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios: Part 3 intrinsic and geometrical laser beam classification, propagation and details of test methods (First Revision) | 0 | ---- | Buy | |
| 143 | IS 14859 : 2000 |
Specification for hindi (Devnagri) stencil templates and pen tips | 0 | ---- | Download | |
| 144 | IS 1492 : 1970 (1 Revision) |
Specification for metric surveying chains (First Revision) | 1 | ---- | Download | |
| 145 | IS 14929 : 2022/ISO 16610-29 : 2020 (1 Revision) |
Mixed polyolefin fibre ropes (first revision) | 2 | ---- | Buy | |
| 146 | IS 1493 : Part 10 : 2022/ISO 128-3:2022 |
Methods of chemical analysis of iron ores – Part 10 Determination of Zinc Content — Flame Atomic Absorption Spectrometric Method | 0 | ---- | Buy | |
| 147 | IS 14962 : Part 5 : 2001/ISO 965-5:1998 |
ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing | 1 | ---- | Buy | |
| 148 | IS 14962 : Part 2 : 2001/ISO 965-2:1998 |
ISO general purpose metric screw threads - Tolerances: Part 2 limits of sizes for general purpose external and internal screw threads - Medium quality | 1 | ---- | Buy | |
| 149 | IS 14964 : 2001/ISO 12844 |
Raw optical glass - Grindability with diamond pellets - Test method and classification | 0 | ---- | Buy | |
| 150 | IS/ISO 1501 : 2009/ISO 1501:2009 |
ISO miniature screw threads | 1 | ---- | Buy | |
| 151 | IS 15021 : Part 4 : 2001/ISO 5456-4 : 1996 |
Technical drawings -- Projection methods: Part 4 Central projection | 0 | ---- | Buy | |
| 152 | IS 15021 : Part 3 : 2001/ISO 5456-3 : 1996 |
Technical drawings -- Projection methods: Part 3 Axonometric representations | 0 | ---- | Buy | |
| 153 | IS 15021 : Part 2 : 2001/ISO 5456-2 : 1996 |
Technical drawings -- Projection methods: Part 2 Orthographic representations | 0 | ---- | Buy | |
| 154 | IS 15021 : Part 1 : 2001/ISO 5456-1 : 1996 |
Technical drawings -- Projection methods: Part 1 Synopsis | 0 | ---- | Buy | |
| 155 | IS 15023 : Part 2 : 2001/ISO 5845-2 : 1995 |
Technical drawings -- Simplified representation of the assembly of parts with fasteners: Part 2 Rivets for aerospace equipment | 0 | ---- | Buy | |
| 156 | IS 15023 : Part 1 : 2001/ISO 5845-1 : 1995 |
Technical drawings -- Simplified representation of the assembly of parts with fasteners: Part 1 General principles | 0 | ---- | Buy | |
| 157 | IS 15024 : 2011/ISO 11442 : 2006 (1 Revision) |
Technical product documentation -- Document management (First Revision) | 0 | ---- | Buy | |
| 158 | IS 15044 : 2019/ISO 10579 : 2010 (1 Revision) |
Geometrical Product Specifications (GPS) -- Dimensioning and Tolerancing -- Non-rigid parts (First Revision) | 0 | ---- | Buy | |
| 159 | IS 15064 : 2002 |
Plastic movement holders for wrist watch cases -- Specification | 0 | ---- | Download | |
| 160 | IS 15084 : 2002 |
Spring balance - Tension type (For Use In Schools) - Specification | 0 | ---- | Download | |
| 161 | IS 15085 : 2001 |
Decimeter Cubes for Use in Schools | 0 | ---- | Download | |
| 162 | IS 15085 : 2001 |
Decimeter cube (For Use In Schools) - Specification | 0 | ---- | Download | |
| 163 | IS 15093 : 2002/ISO 9431 : 1990 |
Construction drawings -- Spaces for drawing and for text, and title blocks on drawing sheets | 0 | ---- | Buy | |
| 164 | IS 1518 : 1980 (1 Revision) |
Method for gauging of petroleum and liquid petroleum products (First Revision) | 0 | ---- | Download | |
| 165 | IS 15197 : 2002 |
Kerosene heating lamp for use in school and college laboratories - Specification | 0 | ---- | Download | |
| 166 | IS 15216 : 2002 |
Balloons - Meteorological | 0 | ---- | Download | |
| 167 | IS 15242 : 2002 |
Magnets (for Use In Schools And--Colleges) — Specification | 0 | ---- | Download | |
| 168 | IS 15242 : 2002 |
Magnets (For Use In Schools And Colleges) - Specification | 0 | ---- | Download | |
| 169 | IS 15243 : 2002 |
Velocity scale set for meteorological purposes | 0 | ---- | Download | |
| 170 | IS 15253 : 2002 |
Dew gauge - Specification | 0 | ---- | Download | |
| 171 | IS 15261 : 2002/ISO 3274 : 1996 |
Geometrical product specifications (GPS) - surface texture : profile method - Nominal characteristics of contact (Stylus) instruments | 0 | ---- | Buy | |
| 172 | IS 15264 : 2002/ISO 8785 : 1998 |
Geometrical product specification (GPS) - surface imperfections - Terms, definitions and parameters | 0 | ---- | Buy | |
| 173 | IS 15269 : 2018/ISO 8039 (1 Revision) |
Optics and optical instruments - Microscopes - Values, tolerances and symbols for magnification (First Revision) | 0 | ---- | Buy | |
| 174 | IS 15288 : Part 2 : 2018/ISO 8486-2:2007 (1 Revision) |
Bonded abrasives - Determination and designation of grain size distribution: Part 2 microgrits F 230 to F 1200 (First Revision) | 0 | ---- | Buy | |
| 175 | IS 1535 : 2022/ISO 19289 : 2015 (2 Revision) |
Textiles - Cotton Lining Cloth - Specification (second revision) | 0 | ---- | Buy | |
| 176 | IS 15371 : Part 6 : 2018/14253-6 : 2012 |
Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment Part 6 Generalized Decision Rules for the Acceptance and Rejection of Instruments and Workpieces | 0 | ---- | Buy | |
| 177 | IS 15371 : Part 3 : 2018/ISO 14253-3 : 2011 (1 Revision) |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 3 guidelines for achieving agreements on measurement uncertainty statements (First Revision) | 0 | ---- | Buy | |
| 178 | IS 15371 : Part 2 : 2018/ISO 14253-2:2011 (1 Revision) |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 2 guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (First Revision) | 1 | ---- | Buy | |
| 179 | IS 15371 : Part 4 : 2018/ISO/TS 14253-4 ; 2010 |
Geometrical Product Specifications (GPS)-Inspection by Measurement of Workpieces and Measuring Equipment Part 4 Background on functional Limits and Specification Limits in Decision Rules | 0 | ---- | Buy | |
| 180 | IS 15373 : 2003/ISO 4291 : 1985 |
Method for the assessment of departure from roundness - Measurement of variations in radius | 0 | ---- | Buy | |
| 181 | IS 15374 : 2003/ISO 4292 : 1985 |
Methods for the assessment of departure from roundness - Measurement by twoand three - Point methods | 0 | ---- | Buy | |
| 182 | IS 15421 : Part 1 : 2003/ISO 13565-1 : 1996 |
Geometrical product specifications (GPS) - Surface texture: profile method - surfaces having stratified functional properties: Part 1 filtering and general measurement conditions | 0 | ---- | Buy | |
| 183 | IS 15422 : 2003/ISO 12085 : 1996 |
Geoivietrical product specifications (GPS) - Surface texture: profile method - motif parameters | 0 | ---- | Buy | |
| 184 | IS 15423 : Part 1 : 2003/ISO 5436-1 : 2000 |
Geometrical product specifications (GPS) - Surface texture: profile method measurement standards: Part 1 material measures | 0 | ---- | Buy | |
| 185 | IS 15483 : Part 1 : 2019/ISO 12858-1 (1 Revision) |
Optics and optical instruments - Ancillary devices for geodetic instruments: Part 1 inver levelling staffs (First Revision) | 0 | ---- | Buy | |
| 186 | IS 15503 : Part 2 : 2014/ISO 9186-2 : 2008 |
Graphical symbols - Test methods: Part 2 method for testing perceptual quality (First Revision) | 0 | ---- | Buy | |
| 187 | IS 15538 : 2018/ISO 9284 : 1994 (1 Revision) |
Abrasive grains - Test sieving machines | 0 | ---- | Buy | |
| 188 | IS 15575 : Part 2 : 2023/ISO 10110-18:2018 (2 Revision) |
Electroacoustics Sound Level Meters Part 2: Pattern Evaluation Tests (Second Revision) | 0 | ---- | Buy | |
| 189 | IS 15635 : Part 7 : 2019/ISO 10360-7 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 7 CMMs equipped with imaging probing systems | 0 | ---- | Buy | |
| 190 | IS 15635 : Part 3 : 2006/ISO 10360-3 : 2000 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 3 CMMs with the axis of a rotary table as the fourth axis | 0 | ---- | Buy | |
| 191 | IS 15635 : Part 6 : 2006/ISO 10360-6 : 2001 |
Geometrical product specifications (GPS) - acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 estimation of errors in computing gaussian associated features | 1 | ---- | Buy | |
| 192 | IS 15635 : Part 2 : 2014/ISO 10360-2 : 2009 (1 Revision) |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 2 CMMs used for measuring linear dimensions (First Revision) | 0 | ---- | Buy | |
| 193 | IS 15635 : Part 9 : 2019/ISO 10360-9 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 9 CMMs with multiple probing systems | 0 | ---- | Buy | |
| 194 | IS 15635 : Part 8 : 2019/ISO 10360-8 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 8 CMMs equipped with optical distance sensors | 0 | ---- | Buy | |
| 195 | IS 15635 : Part 1 : 2006/ISO 10360-1 : 2000 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 1 vocabulary | 0 | ---- | Buy | |
| 196 | IS 15672 : 2006 |
Flow measurement of natural gas and fluids by coriolis meters | 0 | ---- | Download | |
| 197 | IS 15673 : 2006 |
Folow mesasurment of natural gas by rotary piston meters | 1 | ---- | Download | |
| 198 | IS 15674 : 2006 |
Flow measurement of natural gas by ultrasonic meter | 1 | ---- | Download | |
| 199 | IS 15675 : 2006 |
Flow measurement of natural gas and fluids by orifice plate meters | 1 | ---- | Download | |
| 200 | IS 15677 : 2006 |
Metering of natural gas - Code of practice | 1 | ---- | Download | |
| 201 | IS 1568 : 1970 (1 Revision) |
Specification for wire cloth for general purposes (First Revision) | 0 | ---- | Download | |
| 202 | IS 15934 : Part 3 : 2022/ISO 14405-2:2018 (1 Revision) |
LIQUID CRYSTAL DISPLAY DEVICES PART 3: LIQUID CRYSTAL DISPLAY LCD CELLS SECTIONAL SPECIFICATION | 0 | ---- | Buy | |
| 203 | IS 15942 : 2011/ISO 15785 : 2002 |
Technical drawings -- Symbolic presentation and indication of adhesive, fold and pressed joints | 0 | ---- | Buy | |
| 204 | IS 1607 : 2013 (2 Revision) |
Methods of test sieving (Second Revision) | 0 | ---- | Buy | |
| 205 | IS 16150 : Part 1 : 2023/ISO 10110-8:2019 (1 Revision) |
Fish feed - Specification Part 1 Carp feed | 0 | ---- | Buy | |
| 206 | IS 16224 : Part 2 : 2014/ISO 12780-2 : 2011 |
Geometrical product specifications (GPS) - Straightness: Part 2 specification operators | 0 | ---- | Buy | |
| 207 | IS 16224 : Part 1 : 2014/ISO 12780-1 : 2011 |
Geometrical Product Specifications (GPS) - Straightness Part 1 Vocabulary and Parameters of Straightness | 0 | ---- | Buy | |
| 208 | IS 16225 : Part 1 : 2014/ISO 12180-1 : 2011 |
Geometrical product specifications (GPS) - Cylindricity: Part 1 vocabulary and parameters of cylindrical form | 0 | ---- | Buy | |
| 209 | IS 16225 : Part 2 : 2014/ISO 12180-2 : 2011 |
Geometrical product specifications (GPS) - Cylindricity: Part 2 specification operators | 0 | ---- | Buy | |
| 210 | IS 16226 : Part 2 : 2014/ISO 12181-2 : 2011 |
Geometrical product specifications (GPS) - Roundness: Part 2 specification operators | 0 | ---- | Buy | |
| 211 | IS 16226 : Part 1 : 2014/ISO 12181-1 : 2011 |
Geometrical product specifications (GPS) - Roundness: Part 1 vocabulary and parameters of roundness | 0 | ---- | Buy | |
| 212 | IS 16294 : Part 2 : 2016/ISO 12781-2:2011 |
Geometrical product specifications (GPS) - Flatness: Part 2 specification operators | 0 | ---- | Buy | |
| 213 | IS 16300 : 2014/ISO/TR 16015 : 2003 |
Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influence | 0 | ---- | Buy | |
| 214 | IS 16318 : 2015/ISO 12819 : 2009 |
Methods of evaluation of the battery life of a battery-powered watch | 0 | ---- | Buy | |
| 215 | IS 16319 : 2015/ISO 3159 : 2009 |
Timekeeping instruments -- Wrist-chronometers with spring balance oscillator | 0 | ---- | Buy | |
| 216 | IS 1632 : 1993 (1 Revision) |
Optical instruments - Bubbles - Specification (First Revision) | 0 | ---- | Download | |
| 217 | IS 16324 : 2014/ISO 558 : 1980 |
Conditioning and Testing - Standard Atmospheres - Definitions | 0 | ---- | Buy | |
| 218 | IS 16514 : Part 1 : 2018 |
Non-Automatic Weighing Instruments Part 1 Terminology and Definitions | 0 | ---- | Download | |
| 219 | IS 16531 : 2022/ISO 14405-3:2016 (1 Revision) |
Biodiesel Diesel Fuel Blend B8 to B20 Specification First Revision of IS 16531 | 0 | ---- | Buy | |
| 220 | IS 16560 : 2017/ISO 7726 : 1998 |
Ergonomics of the Thermal Environment — Instruments for Measuring Physical Quantities | 0 | ---- | Buy | |
| 221 | IS 16561 : Part 6 : 2022/ISO/TS 17863:2013 |
ERGONOMIC DESIGN OF CONTROL CENTRES — PART 6: ENVIRONMENTAL REQUIREMENTS FOR CONTROL ROOMS | 0 | ---- | Buy | |
| 222 | IS 16739 : 2018/ISO 16622 : 2002 |
Meteorology - Sonic Anemometers/Thermometers Acceptance Test methods for Mean Wind Measurements | 0 | ---- | Buy | |
| 223 | IS 16740 : Part 1 : 2018/ISO 17713-1 : 2007 |
Meteorology - Wind Measurement Part 1 Wind Tunnel Test Methods for Rotating Anemometer Performance | 0 | ---- | Buy | |
| 224 | IS 16741 : 2018/ISO 17714 : 2007 |
Meterology -Air Temperature Measurements Test Methods for Comparing the Performance of Thermometer Shields/Screens and Defining Important Characteristics | 0 | ---- | Buy | |
| 225 | IS 16748 : 2018/ISO 13102 : 2012 |
Geometrical Product Specifications (GPS)-Dimensional Measuring Equipment Electronic Digital-Indicator Gauge-Design and Metrological Characteristics | 0 | ---- | Buy | |
| 226 | IS 17080 : Part 1 : 2019 |
Automatic Gravimetric Filling Instruments Part 1 Terminology and Definitions | 0 | ---- | Download | |
| 227 | IS 17083 : Part 2 : 2019/ISO 14617-2 : 2002 |
Graphical symbols for diagrams: Part 2 Symbols having general application | 0 | ---- | Buy | |
| 228 | IS 17083 : Part 7 : 2019/ISO 14617-7:2002 |
Graphical symbols for diagrams: Part 7 Basic mechanical components | 0 | ---- | Buy | |
| 229 | IS 17083 : Part 14 : 2019/ISO 14617-14:2004 |
Graphical symbols for diagrams: Part 14 Devices for transport and handling of material | 0 | ---- | Buy | |
| 230 | IS 17083 : Part 3 : 2019/ISO 14617-3:2002 |
Graphical symbols for diagrams: Part 3 Connections and related devices | 0 | ---- | Buy | |
| 231 | IS 17083 : Part 10 : 2019/ISO 14617-10:2002 |
Graphical symbols for diagrams: Part 10 Fluid power converters | 0 | ---- | Buy | |
| 232 | IS 17083 : Part 6 : 2019/ISO 14617-6:2002 |
Graphical symbols for diagrams: Part 6 Measurement and control functions | 0 | ---- | Buy | |
| 233 | IS 17083 : Part 13 : 2019/ISO 14617-13:2004 |
Graphical symbols for diagrams: Part 13 Devices for material processing | 0 | ---- | Buy | |
| 234 | IS 17083 : Part 1 : 2019/ISO 14617-1:2005 |
Graphical symbols for diagrams: Part 1 General information and indexes | 0 | ---- | Buy | |
| 235 | IS 17083 : Part 9 : 2019/ISO 14617-9:2002 |
Graphical symbols for diagrams: Part 9 Pumps, compressors and fans | 0 | ---- | Buy | |
| 236 | IS 17083 : Part 5 : 2019/ISO 14617-15:2002 |
Graphical symbols for diagrams: Part 5 Measurement and control devices | 0 | ---- | Buy | |
| 237 | IS 17083 : Part 12 : 2019/ISO 14617-12:2002 |
Graphical symbols for diagrams: Part 12 Devices for separating, purification and mixing | 0 | ---- | Buy | |
| 238 | IS 17083 : Part 8 : 2019/ISO 14617-8:2002 |
Graphical symbols for diagrams: Part 8 Valves and dampers | 0 | ---- | Buy | |
| 239 | IS 17083 : Part 15 : 2019/ISO 14617-15:2002 |
Graphical symbols for diagrams: Part 15 Installation diagrams and network map | 0 | ---- | Buy | |
| 240 | IS 17083 : Part 4 : 2019/ISO 14617-4:2002 |
Graphical symbols for diagrams: Part 4 Actuators and related devices | 0 | ---- | Buy | |
| 241 | IS 17083 : Part 11 : 2019/ISO 14617-11:2002 |
Graphical symbols for diagrams: Part 11 Devices for heat transfer and heat engines | 0 | ---- | Buy | |
| 242 | IS 17141 : Part 4 : 2019/ISO 4266-4:2002 |
Petroleum and Liquid Petroleum Products — Measurement of Level and Temperature in Storage Tanks by Automatic Methods Part 4 Measurement of Temperature in Atmospheric Tanks | 0 | ---- | Buy | |
| 243 | IS 17141 : Part 2 : 2019/ISO 4266-2:2002 |
Petroleum and Liquid Petroleum Products — Measurement of Level and Temperature in Storage Tanks by Automatic Methods Part 2 Measurement of Level in Marine Vessels | 0 | ---- | Buy | |
| 244 | IS 17141 : Part 1 : 2019/ISO 4266-1: 2002 |
Petroleum and Liquid Petroleum Products — Measurement of Level and Temperature in Storage Tanks by Automatic Methods Part 1 Measurement of Level in Atmospheric Tanks | 0 | ---- | Buy | |
| 245 | IS 17166 : 2019/ISO 15787:2016 |
Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications | 0 | ---- | Buy | |
| 246 | IS 17167 : 2019/ISO 15226:1999 |
Technical product documentation -- Life cycle model and allocation of documents | 0 | ---- | Buy | |
| 247 | IS 17170 : Part 2 : 2019/ISO 10628-2:2012 |
Diagrams for the chemical and petrochemical industry: Part 2 Graphical symbols | 0 | ---- | Buy | |
| 248 | IS 17170 : Part 1 : 2019/ISO 10628-1:2014 |
Diagrams for the chemical and petrochemical industry: Part 1 Specification of diagrams | 0 | ---- | Buy | |
| 249 | IS 17171 : 2019/ISO 3766:2003 |
Construction drawings -- Simplified representation of concrete reinforcement | 0 | ---- | Buy | |
| 250 | IS 17173 : 2019/ISO 11091:1994 |
Construction drawings -- Landscape drawing practice | 0 | ---- | Buy | |
| 251 | IS 17192 : Part 4 : 2023/ISO 16610-32 : 2023 |
Robotics Performance criteria and related test methods for service robots Part 4: Lower-back support robots | 0 | ---- | Buy | |
| 252 | IS 17614 : Part 23 : 2021/ISO 10360-10:2021 |
Water Quality Sampling Part 23 Guidance on Passive Sampling in Surface Waters | 0 | ---- | Buy | |
| 253 | IS 1764 : 1961 |
Specification for trough compass | 0 | ---- | Download | |
| 254 | IS 17661 : Part 3 : 2022/ISO 10209:2022 |
Ships and marine technology Marine NOX Reduction Agent AUS 40 Part 3: Handling transportation and storage | 0 | ---- | Buy | |
| 255 | IS 17740 : 2022/ISO 16610-41: 2015 |
Isolated Towers, Masts and Poles using Structural Steel - Code of Practice | 0 | ---- | Buy | |
| 256 | IS 17753 : 2026/ISO 14253-5:2015 |
Paperbased Multilayer Laminated/Extruded Composite Cartons (Aseptic and Non-Aseptic) for Processed Liquid Food Products and Beverages — Specification | 4 | ---- | Buy | |
| 257 | IS 1779 : 1961 |
Specification for 4 - Metre, levelling staff, folding type | 0 | ---- | Download | |
| 258 | IS 1781 : 2022/ISO 16610-61 : 2015 (2 Revision) |
Urea , technical - Specification (Second Revision) | 1 | ---- | Buy | |
| 259 | IS 17867 : Part 3 : 2022/ISO 16610-31:2016 |
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 3: Dimensions for connecting and interconnection cables | 0 | ---- | Buy | |
| 260 | IS 17867 : Part 2 : 2022/ISO 16610-1: 2015 |
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 2: Connecting dimensions for yarn feeders and yarn control devices | 0 | ---- | Buy | |
| 261 | IS 17868 : 2022/ISO 25178-73:2019 |
Spinning preparatory spinning and doubling twisting machinery Tubes for ring-spinning doubling and twisting spindles taper 1:38 and 1:64 | 0 | ---- | Buy | |
| 262 | IS 17900 : Part 3 : Sec 1 : 2023/ISO 129-5 : 2018 |
Lifts for the Transport of Persons and Goods: Part 3 Specifications for Planning and Selection Section 1 PassengerServiceHospital BedStretcher Lifts | 0 | ---- | Buy | |
| 263 | IS 17907 : 2022/ISO 21920-3:2021 |
DOMESTIC METHANOL COOKSTOVE-CANISTER TYPE | 0 | ---- | Buy | |
| 264 | IS 17991 : 2022/ISO 16610-49 : 2015 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature | 0 | ---- | Buy | |
| 265 | IS 18062 : 2023/ISO 10110-9:2016 |
OIL OF TAGETES MINUTA - SPECIFICATION | 0 | ---- | Buy | |
| 266 | IS 18111 : 2023/14880-2:2006 |
Radiological protection - Criteria and performance limits for the periodic evaluation of dosimetry services | 0 | ---- | Buy | |
| 267 | IS/ISO/IEC/TR 18121 : 2015/ISO 16610-60 : 2015 |
Information technology-Learning education and training- Virtual experiment framework | 0 | ---- | Buy | |
| 268 | IS 18123 : 2023/14880-5:2010 |
Electro technical Vocabulary : Electronic tubes | 0 | ---- | Buy | |
| 269 | IS 18143 : 2023/ISO 10110-19:2015 |
Animal feeding stuffs � Determination of aflatoxin B1 | 0 | ---- | Buy | |
| 270 | IS 18180 : Part 4 : 2023/14880-1:2019 |
Geometrical product specifications (GPS) � Basic concepts: Part 4 Geometrical characteristics for quantifying GPS deviations | 0 | ---- | Buy | |
| 271 | IS 1842 : 1961 |
Specification for surveying chain pins (Arrows) | 0 | ---- | Download | |
| 272 | IS 1856 : 2021/ISO 10552:2014 (4 Revision) |
Steel wire ropes for haulage purposes - Specification Fourth Revision | 0 | ---- | Buy | |
| 273 | SP 19 : 1980 |
Guidelines for classification of quality of scraped surfaces | 0 | ---- | Download | |
| 274 | IS 19012 : 2022/ISO 21920-1 : 2021 |
Nonanol - Specification | 0 | ---- | Buy | |
| 275 | IS 19019 : Part 1 : 2023/14880-3:2006 |
Measurement of the electrical properties of microwave tubes Part 1: Terminology | 0 | ---- | Buy | |
| 276 | IS 1932 : 2022/ISO 16610-22:2015 (3 Revision) |
Mustard and Rapeseed Oilcake as Livestock Feed Ingredient � Specification | 0 | ---- | Buy | |
| 277 | IS 1955 : 1961 |
Specification for prismatic compass, liquid | 0 | ---- | Download | |
| 278 | IS 1957 : 1961 |
Specification for prismatic compasses, non - Liquid | 0 | ---- | Download | |
| 279 | IS 1966 : Part 2 : 2022/ISO 16610-21:2011 (3 Revision) |
Textiles - Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension (third revision) | 0 | ---- | Buy | |
| 280 | IS 2007 : 1974 (1 Revision) |
Method for calibration of vertical oil storage tanks (First Revision) | 0 | ---- | Download | |
| 281 | IS 2008 : 1961 |
Method For Computation of Capacity Tables For Vertical Oil Storage Tanks | 0 | ---- | Download | |
| 282 | IS 2009 : 1975 (1 Revision) |
Method for calibration of horizontal and tilted oil storage tanks (First Revimn) | 0 | ---- | Download | |
| 283 | IS 2102 : Part 1 : 1993/ISO 2768-1 : 1989 (3 Revision) |
General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision) | 0 | ---- | Buy | |
| 284 | IS 2103 : 1980 (2 Revision) |
SPECIFICATION FOR ENGINEER - SQUARES ( Second Revision ) | 0 | ---- | Download | |
| 285 | IS 2166 : 1963 |
Method for computation of capavity tables for horizontal and tilted oil storage tanks | 0 | ---- | Download | |
| 286 | IS 2186 : 1985 (1 Revision) |
ISO metric external screw threads for interference fit applications (First Revision) | 0 | ---- | Download | |
| 287 | IS 2202 : Part 1 : 2023/ISO 16610-62 : 2023 (7 Revision) |
Wooden Flush Door Shutters (Solid Core Type) — Specification Part 1 Plywood Face Panels ( Seventh Revision ) | 1 | ---- | Buy | |
| 288 | IS 2220 : 1990 (1 Revision) |
Engineering metrology - Steel straightedges - Specification (First Revision) | 0 | ---- | Download | |
| 289 | IS/ISO 22319 : 2017/ISO 129-4 : 2013 |
Security and Resilience � Community resilience � Guidelines for planning the involvement of spontaneous volunteers | 0 | ---- | Buy | |
| 290 | IS 2251 : 1986 (1 Revision) |
Specification for plug and ring gauges for self holding tapers (First Revision) | 0 | ---- | Download | |
| 291 | IS 2285 : 2003/ISO 8512-1 : 1990 (3 Revision) |
Engineering metrology - Measuring equipment - Cast iron surface plates - Specification (Third Revision) | 0 | ---- | Buy | |
| 292 | IS 2288 : 1963 |
Specification for ranging rods | 0 | ---- | Download | |
| 293 | IS 2334 : 2001/ISO 1502 : 1996 (2 Revision) |
ISO general purpose metric screw threads - Gauges and gauging (Second Revision) | 0 | ---- | Buy | |
| 294 | IS 2341 : 1963 |
Specification for large metric capacity calibrating measures (Non - Tilting type) | 0 | ---- | Download | |
| 295 | IS 2383 : 1963 |
Code of practice for calibration of vehicle tanks for petroleum products and other liquids | 0 | ---- | Download | |
| 296 | IS 2466 : 1963 |
Specification for beam compasses | 0 | ---- | Download | |
| 297 | IS 2473 : 1975 (1 Revision) |
Dimensions for centre holes (First Revision) | 1 | ---- | Download | |
| 298 | IS 2533 : 1978 (1 Revision) |
Specification for geometry boxes (First Revision) | 2 | ---- | Download | |
| 299 | IS 2539 : 1963 |
Specification for plane tables | 1 | ---- | Download | |
| 300 | IS 2540 : 2008 (1 Revision) |
Dimensions for threaded centre holes (First Revision) | 0 | ---- | Download | |
| 301 | IS 2554 : 1971 (1 Revision) |
Specification for cast iron angle plates (First Revision) | 0 | ---- | Download | |
| 302 | IS 2556 : Part 1 : 2021/ISO 17450-2:2012 (4 Revision) |
Vitreous China sanitary appliances - Specification: Part 1 General requirements (fourth revision) | 0 | ---- | Buy | |
| 303 | IS 26002 : Part 2 : 2021/ISO/IEC Guide 99:2007 |
ASSURANCE ENGAGEMENT STANDARD PART 2 CONDUCTING ASSURANCE ENGAGEMENTS FOR ALL MATTERS OTHER THAN STATUTORY FINANCIAL INFORMATION ─ GUIDANCE | 0 | ---- | Buy | |
| 304 | IS 2643 : 2005/ISO 228-1:2000 (3 Revision) |
Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision) | 0 | ---- | Buy | |
| 305 | IS 2747 : 1990 (1 Revision) |
Taximeters - performance requirements (First Revision) | 2 | ---- | Download | |
| 306 | IS 2754 : 1964 |
Genral requirements for optical instruments | 1 | ---- | Download | |
| 307 | IS 2769 : 1969 (1 Revision) |
Sizes for squares and square holes for general engineering purposes (First Revision | 0 | ---- | Download | |
| 308 | IS 2801 : 1967 |
Accuracy requirements for bulk meters used in petroleum trade | 1 | ---- | Download | |
| 309 | IS 2808 : 1964 |
Method for computation of capacity tables for pressurized storage tanks | 0 | ---- | Download | |
| 310 | IS 2827 : 1976 (1 Revision) |
Methods for calibration of pressurized storage tanks (First Revision) | 0 | ---- | Download | |
| 311 | IS 2911 : Part 3 : 2021/ISO 14978:2018 (2 Revision) |
Design and construction of pile foundations - Code of practice: Part 3 Under-reamed piles (second revision) | 0 | ---- | Buy | |
| 312 | IS 2921 : 2016/ISO 13225 (2 Revision) |
Geometrical product specifications (GPS) - Dimensional measuring equipment; height gauges - Design and metrological characteristics (Second Revision) | 0 | ---- | Buy | |
| 313 | IS 2949 : 1992 (2 Revision) |
Engineering metrology - Plain V - Blocks for inspection purposes - Specification (Second Revision) | 0 | ---- | Download | |
| 314 | IS 2966 : 1964 |
Specification for internal micrometers (Including Stick Micrometers) | 0 | ---- | Download | |
| 315 | IS 2967 : 1983 (1 Revision) |
Specification for external micrometer (First Revision) | 0 | ---- | Download | |
| 316 | IS 2976 : 1964 |
Specification for optical theodolite | 0 | ---- | Download | |
| 317 | IS 2984 : 2003/ISO 3650 : 1998 (2 Revision) |
Slip gauges - Specification [ISO title : geometrical product specifications (GPS) - length standards : gauge blocks] (Second Revision) | 0 | ---- | Buy | |
| 318 | IS 2988 : 1995 (1 Revision) |
Vernier theodolite - Specification (First Revision) | 0 | ---- | Download | |
| 319 | IS/ISO/IEC 30136 : 2018/ISO 764:2020 |
Information technology Performance testing of biometric template protection schemes | 0 | ---- | Buy | |
| 320 | IS 3025 : Part 24 : Sec 2 : 2021/ISO 17450-4:2017 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 24 Sulphates Section 2 Method by Continuous Flow Analysis | 0 | ---- | Buy | |
| 321 | IS 3032 : 1965 |
General requirements for testing the accuracy of commercial measuring instruments used in petroleum trade | 0 | ---- | Download | |
| 322 | IS 3033 : 1965 |
Accuracy requirements for dispensing pumps used in petroleum trade | 0 | ---- | Download | |
| 323 | IS 3047 : 1965 |
Accuracy Requirements For Volumetric Container Filling Machines Used In Petroleum Trade | 0 | ---- | Download | |
| 324 | IS 3073 : 1967 |
Assessment of surface roughness | 3 | ---- | Download | |
| 325 | IS 3081 : 1994 (1 Revision) |
Microscopes - General purposes - Dimensions and marking (First Revision) | 0 | ---- | Download | |
| 326 | IS 3099 : Part 1 TO 2 : 1992 (1 Revision) |
Microscopes - Slips and slidesspecification: Part 1 microscope slips: Part 2 microscope slides (First Revision) | 4 | ---- | Download | |
| 327 | IS 3113 : 1965 |
Specification for prismatic binoculars for common use | 0 | ---- | Download | |
| 328 | IS 3135 : 1965 |
Specieication for cathetometer | 0 | ---- | Download | |
| 329 | IS 3150 : 1982 (2 Revision) |
Hexagonal Wire Netting for General Purposes | 1 | ---- | Download | |
| 330 | IS 3206 : 1989 (1 Revision) |
Engineers Drawing Instruments - Dividers - Specification ( First Revision ) | 0 | ---- | Download | |
| 331 | IS 3207 : 1989 (1 Revision) |
Engineers' Drawing Instruments - Rotating Compasses | 0 | ---- | Download | |
| 332 | IS 3208 : 1989 (1 Revision) |
Engineers drawing instruments - Half set of compasses - Specification (First Revision) | 0 | ---- | Download | |
| 333 | IS 3209 : 1989 (1 Revision) |
Engineers Drawing Instruments - Spring Bow Compasses - Specification ( First Revision ) | 0 | ---- | Download | |
| 334 | IS 3210 : 1989 (1 Revision) |
Engineers' Drawing Instruments - Drawing Pens | 0 | ---- | Download | |
| 335 | IS 3211 : 1991 (1 Revision) |
Engineers Drawing Instruments, Pen Points (First Revision) | 0 | ---- | Download | |
| 336 | IS 3212 : 1991 (1 Revision) |
Engineers' drawings instruments, lengthening bars | 0 | ---- | Download | |
| 337 | IS 3213 : 1991 (1 Revision) |
Engineers Drawing Instruments - Handles - Specification (First Revision) | 0 | ---- | Download | |
| 338 | IS 3214 : 1991 (1 Revision) |
Engineers Drawing Instruments, Pencil Points - Specification ( First Revision ) | 0 | ---- | Download | |
| 339 | IS 3215 : 1991 (1 Revision) |
Engineers Drawing Instruments - Needle Points - Specification ( First Revision ) | 1 | ---- | Download | |
| 340 | IS 3216 : 1989 (1 Revision) |
Engineers Drawing Instruments, Needles - Specification ( First Revision ) | 0 | ---- | Download | |
| 341 | IS 3217 : 1991 (1 Revision) |
Engineers Drawing Instruments, Prickers - Specification ( First Revision ) | 0 | ---- | Download | |
| 342 | IS 3218 : 1968 |
Specification for parallel rulers, 150 mm (Link Type) | 0 | ---- | Download | |
| 343 | IS 3219 : 1966 |
Specification For Engineers Drawing Instruments, Boxes for Leads and Needles | 0 | ---- | Download | |
| 344 | IS 3220 : 1966 |
Specification For Engineers Drawing Instruments, Screw Drivers | 0 | ---- | Download | |
| 345 | IS 3221 : 1966 |
Sets for drawing instruments | 0 | ---- | Download | |
| 346 | IS 3222 : Part 1 : 1989 (1 Revision) |
Instrument screws - Specification: Part 1 fasteners for drawing instruments (First Revision) | 0 | ---- | Download | |
| 347 | IS 334 : 2023/9802 : 2022 (4 Revision) |
Glossary of terms relating to bitumen and tar (Fourth Revision) | 0 | ---- | Buy | |
| 348 | IS 3403 : 1981 |
Dimensions for knurls (First Revision) | 0 | ---- | Download | |
| 349 | IS 3406 : Part 2 : 2014 (3 Revision) |
Dimensions for countersinks and counterbores: Part 2 counterbores (Third Revision) | 0 | ---- | Download | |
| 350 | IS 3406 : Part 1 : 1986 (2 Revision) |
Dimensions for countersinks and counterbores: Part 1 countersinks (Second Revision) | 0 | ---- | Download | |
| 351 | IS 3428 : 2009 (2 Revision) |
Dimensions for relief grooves (Second Revision) | 0 | ---- | Download | |
| 352 | IS 3455 : Part 1 : 1985 (1 Revision) |
Gauging practice for plain workpieces: Part 1 inspection of plain workpieces with indicative measuring instruments | 1 | ---- | Download | |
| 353 | IS 3455 : 1971 (1 Revision) |
Gauging practice for plain workpieces (First Revision) | 3 | ---- | Download | |
| 354 | IS 3457 : 2009 (1 Revision) |
Radii for rounding for general engineering purposes (Second Revision) | 0 | ---- | Download | |
| 355 | IS 3485 : 1983 (2 Revision) |
Specification for plain and master setting ring gauges (Size Range From 1 Up To And Including 315 Mm) (Second Revision) | 1 | ---- | Download | |
| 356 | IS 3510 : 1990 (1 Revision) |
Engineering Metrology - Toolmaker Flats - Specification ( First Revision ) | 0 | ---- | Download | |
| 357 | IS 3512 : 1966 |
Specification for Toolmakers Straightedges | 1 | ---- | Download | |
| 358 | IS 3515 : 1966 |
Specification For Tapes For Use In Measurement Of Oil Quantities | 1 | ---- | Download | |
| 359 | IS 3686 : 1966 |
Specification for student - Type microscope | 2 | ---- | Download | |
| 360 | IS 3708 : Part 5 : 2022/ISO 16610-71 : 2014 (4 Revision) |
METHODS OF TEST FOR NATURAL RUBBER LATEX PART 5 DETERMINATION OF KOH NUMBER Fourth Revision | 0 | ---- | Buy | |
| 361 | IS 3800 : 2023/ISO 10110-7:2017 (2 Revision) |
BATTING GLOVES SPECIFICATION | 0 | ---- | Buy | |
| 362 | IS/ISO/IEC 39794 : Part 4 : 2019/ISO 22810:2010 |
Information technology Extensible biometric data interchange formats Part 4: Finger image data | 0 | ---- | Buy | |
| 363 | IS/ISO/IEC 39794 : Part 1 : 2019/ISO 1413:2016 |
Information technology Extensible biometric data interchange formats Part 1: Framework | 0 | ---- | Buy | |
| 364 | SP 4 : 1969 |
Metric Change In India | 0 | ---- | Download | |
| 365 | IS 4124 : 1981 (1 Revision) |
Glossary of terms relating to powders (First Revison) | 0 | ---- | Download | |
| 366 | SP 42 : 2008 (1 Revision) |
Survey of screw threads (First Revision) | 0 | ---- | Download | |
| 367 | IS 4210 : 1967 |
Specification for strip feeler gauges for electrical purposes | 0 | ---- | Download | |
| 368 | IS 4211 : 1993 (1 Revision) |
Gauges - Thread pitch gauges for ISO metric screw threads (Pitch Range 0.4 To 6 Mm) - Specification (First Revision) | 0 | ---- | Download | |
| 369 | IS 4218 : Part 2 : 2001/ISO 261:1998 (2 Revision) |
ISO general purpose metric screw threads: Part 2 general plan (Second Revision) | 0 | ---- | Buy | |
| 370 | IS 4241 : 1990 (1 Revision) |
Engineering metrology - Engineer Parallels - Specification ( First Revision ) | 0 | ---- | Download | |
| 371 | IS/ISO 4301 : Part 2 : 2022/ISO 16610-20:2015 (1 Revision) |
Cranes Classification Part 2 Mobile Cranes (First Revision) | 0 | ---- | Buy | |
| 372 | IS 4328 : 1967 |
Specification for monocular dissecting microscope | 1 | ---- | Download | |
| 373 | IS 4329 : 1967 |
Specification for measuring (Travelling) microscope | 2 | ---- | Download | |
| 374 | IS 4343 : 2023/ISO 17514 : 2024 (2 Revision) |
Code of Practice for Treatment of Water for High Pressure Boilers (Second Revision) | 0 | ---- | Buy | |
| 375 | IS 4349 : 1987 (1 Revision) |
Specification for cylindrical setting masters (First Revision) | 0 | ---- | Download | |
| 376 | IS 4380 : 1967 |
Specification for abney level | 1 | ---- | Download | |
| 377 | IS 4440 : 1996 (1 Revision) |
Engineering metrology - Precision equipment - Slip gauge accessories (First Revision) | 0 | ---- | Download | |
| 378 | IS 4492 : 1968 |
Specification for welded V - Blocks (Diameter Range 300 To 2000 Mm) | 1 | ---- | Download | |
| 379 | IS 4563 : 1987 (1 Revision) |
Specification for block squares (First Revision) | 0 | ---- | Download | |
| 380 | IS 4590 : 1980 (1 Revision) |
Specification for secondary level (First Revision) | 1 | ---- | Download | |
| 381 | SP 46 : 2003 (1 Revision) |
Engineering drawing practice for schools and colleges | 0 | ---- | Download | |
| 382 | IS 4670 : 1993 (1 Revision) |
Legal Metrology - Liquor Measures - Specification (First Revision) | 0 | ---- | Download | |
| 383 | IS 4695 : Part 2 : 2003 (2 Revision) |
General purpose knuckle threads: Part 2 deviations and tolerances (Second Revision) | 0 | ---- | Download | |
| 384 | IS 4695 : Part 1 : 2003 (2 Revision) |
General purpose knuckle threads: Part 1 profile and nominal sizes (Second Revision) | 0 | ---- | Download | |
| 385 | IS 4696 : Part 4 : 2005 (1 Revision) |
Dimensions for metric buttress threads: Part 4 tolerancing system (Second Revision) | 0 | ---- | Download | |
| 386 | IS 4696 : Part 3 : 2004 (2 Revision) |
Dimensions for metric buttress threads: Part 3 basic dimensions (Second Revision) | 0 | ---- | Download | |
| 387 | IS 4696 : Part 2 : 2004 (1 Revision) |
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 2 PITCH DIAMETER COMBINATIONS (Second Revision) | 0 | ---- | Download | |
| 388 | IS 4696 : Part 1 : 2004 (1 Revision) |
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 1 THREAD PROFILES (Second Revision) | 0 | ---- | Download | |
| 389 | IS/ISO 4708 : 2017/ISO 21920-2:2021 |
Composition cork— Gasket material — Test methods | 0 | ---- | Buy | |
| 390 | IS 4822 : 2022/IEC 82045-1 : 2001 (2 Revision) |
Brass and Bronze Cooking Utensils - Specification | 0 | ---- | Buy | |
| 391 | IS 4838 : 1990 (2 Revision) |
Anthropometric dimensions for school children age group 5 - 17 years (Second Revision) | 0 | ---- | Download | |
| 392 | IS 4849 : 1992 (1 Revision) |
Meteorology - Rain measures - Specification (First Revision) | 1 | ---- | Download | |
| 393 | IS 4960 : 1968 |
Specification for universal and elongated type V - Blocks | 0 | ---- | Download | |
| 394 | IS 4966 : Part 2 : 1969 |
Specification for gauges for serrations: Part 2 for gauging internal serrations | 0 | ---- | Download | |
| 395 | IS 4966 : Part 1 : 1969 |
Specification for gauges for serrations: Part 1 for gauging external serrations | 0 | ---- | Download | |
| 396 | IS 5146 : 1969 |
Specification for sounding sextant | 0 | ---- | Download | |
| 397 | IS 5148 : 1969 |
Specification for hand magnifiers (Circular) - 50, 75 and 100 mm | 0 | ---- | Download | |
| 398 | IS 5153 : 1969 |
Specification for proportional compasses - 150, 200 and 300 mm | 1 | ---- | Download | |
| 399 | IS 516 : Part 2 : Sec 4 : 2021/ISO 4266-5:2002 |
Hardened concrete - Methods of test: Part 2 Properties of hardened concrete other than strength: Section 4 Determination of the carbonation resistance by accelerated carbonation method (first revision) | 0 | ---- | Buy | |
| 400 | IS 5204 : 1969 |
Specifiction for research microscope | 3 | ---- | Download | |
| 401 | IS 5205 : 1969 |
Specification for drawing pins | 0 | ---- | Download | |
| 402 | IS 5213 : 1969 |
Specification for french curves for drawing office use | 0 | ---- | Download | |
| 403 | IS 5235 : 1992 (2 Revision) |
Meteorology - raingauges recording - specification (First Revision) | 1 | ---- | Download | |
| 404 | IS 5257 : 1969 |
Specification for eyepiece and screen graticules for determination of particle size of powders | 0 | ---- | Download | |
| 405 | IS 5258 : 1969 |
Determination of particle size of powders by optical microscope method | 0 | ---- | Download | |
| 406 | IS 5268 : Part 1 : 1991 (1 Revision) |
Engineering metrology - Straightedges: Part 1 cast iron straightedges (bow shaped or camel back type and 1-Section or parallel type) (First Revision) | 0 | ---- | Download | |
| 407 | IS 5273 : 1969 |
Specification for radius gauges | 1 | ---- | Download | |
| 408 | IS 5282 : 1969 |
Liquid sedimentation methods for determination of particle size of powders | 0 | ---- | Download | |
| 409 | IS 5359 : 1987 (1 Revision) |
Specification for sine bars (First Revision) | 0 | ---- | Download | |
| 410 | IS 5383 : 2021/ISO 19235:2015 (3 Revision) |
Tooth Powder -Specification | 0 | ---- | Buy | |
| 411 | IS 5388 : 1983 (2 Revision) |
Specification for hexagon handles for plain and threaded plug gauges (Second Revision) | 0 | ---- | Download | |
| 412 | IS 5415 : 1969 |
Code of practice for packing and packaging of optical and mathematical instruments and components | 0 | ---- | Download | |
| 413 | IS 5421 : 2013 (2 Revision) |
Glossary of terms relating to test sieves and test sieving (Second Revision) | 0 | ---- | Buy | |
| 414 | IS 5440 : 1969 |
Specification for optical flats | 0 | ---- | Download | |
| 415 | IS/ISO 55002 : 2018/ISO 10360-12:2016 (1 Revision) |
Asset Management Management Systems Guidelines for the application of ISO 55001 | 0 | ---- | Buy | |
| 416 | IS 554 : 1999/ISO 7-11 : 1994 (4 Revision) |
Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision) | 1 | ---- | Buy | |
| 417 | IS 5694 : 1970 |
Specification For Engineers, Drawing Instruments, Dotting Pens | 1 | ---- | Download | |
| 418 | IS 5706 : 1993 (1 Revision) |
Optical instruments - Spirit levels for use in precision engineering - Specification (First Revision) | 0 | ---- | Download | |
| 419 | IS 5726 : 1970 |
Specification For Engineers Drawing Instruments, Bordering Pens | 1 | ---- | Download | |
| 420 | IS 5737 : 1970 |
Specification For Engineers Drawing Instruments, Curve Pens | 0 | ---- | Download | |
| 421 | IS 5798 : 1970 |
Specification for mercury barometers | 1 | ---- | Download | |
| 422 | IS 5799 : 1970 |
Specificatioti for windvane | 0 | ---- | Download | |
| 423 | IS 5901 : 1970 |
Specification for thermograph, bimetallic | 1 | ---- | Download | |
| 424 | IS 5912 : 1997 (1 Revision) |
Specification for anemometer, cup counter (First Revision) | 1 | ---- | Download | |
| 425 | IS 5924 : 1988 (1 Revision) |
Specification for clock mechanisms and drums for meteorological instruments (First Revision) | 1 | ---- | Download | |
| 426 | IS 5928 : 1970 |
Specification for tangent clinometer | 0 | ---- | Download | |
| 427 | IS 5939 : 1970 |
Specification for single angle sine tables | 0 | ---- | Download | |
| 428 | IS 5943 : 1970 |
Specification for compound angle sine tables | 0 | ---- | Download | |
| 429 | IS 5946 : 1992 (1 Revision) |
Meteorology - Whirling psychrometer - Specification (First Revision) | 0 | ---- | Download | |
| 430 | IS 5947 : 1970 |
Charts for recording meteorological instruments | 0 | ---- | Download | |
| 431 | IS 5948 : 1970 |
Specification for thermometer screens | 0 | ---- | Download | |
| 432 | IS 5973 : 1998 (1 Revision) |
Pan Evaporimeter - Specification (First Revision) | 0 | ---- | Download | |
| 433 | IS 5979 : 1981 (1 Revision) |
Specification for sine centres (First Revision) | 0 | ---- | Download | |
| 434 | IS 5980 : 1978 (1 Revision) |
Specification for bench centres (Firsf Revision) | 0 | ---- | Download | |
| 435 | IS 5994 : 2022/16610-85 : 2013 (4 Revision) |
Agricultural Tractors - Test Code (Fourth Revision) | 0 | ---- | Buy | |
| 436 | IS/IEC 60834 : Part 1 : 1999/14880-4:2006 |
Teleprotection equipment of power systems Performance and testing Part 1: Command systems | 0 | ---- | Buy | |
| 437 | SP 61 : 1994 |
General guidelines for automatic weather stations | 1 | ---- | Download | |
| 438 | IS 6137 : 1983 (2 Revision) |
Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision) | 0 | ---- | Download | |
| 439 | IS 6150 : 1971 |
Specification for ISO metric screw thread measuring prisms | 1 | ---- | Download | |
| 440 | IS 6231 : 1971 |
Specification for prismatic angle gauges | 0 | ---- | Download | |
| 441 | IS 6232 : 1971 |
Specification for cast iron box angle plates | 1 | ---- | Download | |
| 442 | IS 6239 : 2021/ISO 129-1:2018 (3 Revision) |
Textiles - Man-made Fibres - Generic Names (Third Revision) | 0 | ---- | Buy | |
| 443 | IS 6244 : 1980 (1 Revision) |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 40 To 120 mm) (First Revision) | 1 | ---- | Download | |
| 444 | IS 6246 : 1980 (1 Revision) |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 120 Up To And Including 250 mm) (First Revision) | 0 | ---- | Download | |
| 445 | IS/IEC 62680 : Part 1 : Sec 1 : 2015/ISO 16610-28 : 2016 |
Universal Serial Bus Interfaces for Data and Power Part 1: Common Components Section 1: USB Battery Charging Specification | 0 | ---- | Buy | |
| 446 | IS/IEC 62680 : Part 2 : Sec 3 : 2015/ISO 15519-1 : 2010 |
Universal Serial Bus Interfaces for Data and Power Part 2-3: Universal Serial Bus Cables and Connectors Class Document | 0 | ---- | Buy | |
| 447 | IS/IEC 62680 : Part 1 : Sec 2 : 2022/ISO 16610-30 : 2015 |
Universal Serial Bus Interfaces for Data and Power Part 1: Common Components Section 2: USB Power Delivery Specification | 0 | ---- | Buy | |
| 448 | IS 6311 : 1978 (1 Revision) |
Specification for ISO metric screwthread measuring cylinders (First Revision) | 1 | ---- | Download | |
| 449 | IS 6425 : 1971 |
Specification for dioptometer (Lensometer) | 2 | ---- | Download | |
| 450 | IS 6471 : 1971 |
Specification for spectrometer (Student Type) | 1 | ---- | Download | |
| 451 | IS 6590 : 2023/ISO 10110-17:2004 (1 Revision) |
ROPES FOR MOUNTAINEERING � SPECIFICATIONS | 0 | ---- | Buy | |
| 452 | IS 6805 : 1973 |
Specification for assmann psychrometer | 1 | ---- | Download | |
| 453 | IS 6871 : 1992 (1 Revision) |
Wind equipment - Distant indicating - Specification (First Revision) | 1 | ---- | Download | |
| 454 | IS 6952 : 1990 (1 Revision) |
Engineering metrology - Cylindrical squares - Specification (First Revision) | 0 | ---- | Download | |
| 455 | IS 6973 : 1973 |
Specification for precision angle plates | 0 | ---- | Download | |
| 456 | IS 6985 : 1973 |
Specification for precision box angle plates | 0 | ---- | Download | |
| 457 | IS 6987 : 1973 |
Specification for steel precision polygons | 0 | ---- | Download | |
| 458 | IS 7009 : 1973 |
Specification for optical square (For Surveying) | 0 | ---- | Download | |
| 459 | IS 7010 : 1973 |
Specification for pivots for magnetic compasses | 1 | ---- | Download | |
| 460 | IS 7011 : 1973 |
Specification for back - Silvered mirrors used in insturment industry | 2 | ---- | Download | |
| 461 | IS 7014 : 1973 |
Specification for length bars | 0 | ---- | Download | |
| 462 | IS 7018 : Part 2 : 1983 (1 Revision) |
Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision) | 0 | ---- | Download | |
| 463 | IS 7018 : Part 1 : 1983 (1 Revision) |
Technical supply conditions for gauges: part 1 general (First Revision) | 0 | ---- | Download | |
| 464 | IS 7018 : Part 3 : 1983 (1 Revision) |
Technical supply conditions for gauges: Part 3 assembly and identification of screw plug gauges for ISO metric screw threads (Size Range Form M1 Upto And Including M200) (First Revision) | 1 | ---- | Download | |
| 465 | IS 7020 : 1973 |
Crystals and dielectric materials used in instrument industry | 0 | ---- | Download | |
| 466 | IS 7047 : 1973 |
Timbers used in instrument industry | 0 | ---- | Download | |
| 467 | IS 7078 : 1973 |
Plastics used in instrument industry | 0 | ---- | Download | |
| 468 | IS 7243 : 1974 |
Specification for sunshine recorder | 0 | ---- | Download | |
| 469 | IS 7244 : 1974 |
Specification for thermometer for mercury barometer | 0 | ---- | Download | |
| 470 | IS 7265 : 1973 |
Coating materials (Metals, Alloys And Dielectrics) used in optical instrument industry | 0 | ---- | Download | |
| 471 | IS 7327 : 2003/ISO 8512-2 : 1990 (2 Revision) |
Engineering metrology - Measuring equipment - Granite surface plates - Specification (Second Revision) | 0 | ---- | Buy | |
| 472 | IS 746 : 2021/ISO 14405-1:2016 (2 Revision) |
Textiles Handloom cotton blankets grey or coloured Specification | 0 | ---- | Buy | |
| 473 | IS/ISO 7507 : Part 1 : 2003/ISO 7507(Part 1):200 |
Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks: Part 1 strapping method | 0 | ---- | Buy | |
| 474 | IS/ISO 7507 : 2011/ISO 7507-2 : 2005 |
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 2 Optical-Reference-Line Method | 0 | ---- | Buy | |
| 475 | IS/ISO 7507 : Part 3 : 2006/ISO 7507-3 : 2006 |
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 3 Optical-Triangulation Method | 0 | ---- | Buy | |
| 476 | IS/ISO 7507 : Part 5 : 2000/ISO 7507-5:2000 |
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 5 External Electro-Optical Distance-Ranging Method | 0 | ---- | Buy | |
| 477 | IS/ISO 7507 : Part 4 : 2010/ISO 7507-4:2010 |
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 4 Internal Electro-Optical Distance-Ranging Method | 0 | ---- | Buy | |
| 478 | IS 7543 : 1975 |
Specification for planimeters | 0 | ---- | Download | |
| 479 | IS 7544 : 1975 |
Specification For Parallel Ruler ( Roller Type ) | 0 | ---- | Download | |
| 480 | IS 7545 : 1975 |
Specification for optical bench (Advanced Type) | 0 | ---- | Download | |
| 481 | IS 7599 : Part 2 : 1975 |
General Requirements for Engineer's Comparators With Stand - Part II : Comparator Standard | 0 | ---- | Download | |
| 482 | IS 7599 : Part 1 : 1975 |
General requirements for engineer's comparators with stands:Part I engineer's comparators | 0 | ---- | Download | |
| 483 | IS 7604 : 1975 |
Specification for length bar accessories | 0 | ---- | Download | |
| 484 | IS 7606 : 1982 (1 Revision) |
Specification for plain adjustable snap gauges (First Revision) | 0 | ---- | Download | |
| 485 | IS 7615 : 2003 (2 Revision) |
System of cone tolerance for conical workpiece from c = 1:3 to 1:500 and lengths from 6 to 630 mm (Second Revision) | 0 | ---- | Download | |
| 486 | IS 7684 : 1975 |
LIMITS OF SIZES FOR ISO METRIC TRAPEZOIDAL NUT THREADS DIAMETER RANGE 8 TO 100 mm | 1 | ---- | Download | |
| 487 | IS 7685 : 1975 |
Limits of sizes for ISO metric trapezoidal bolt threads (Diameter Range 8 To 100 Mm) | 1 | ---- | Download | |
| 488 | IS 7726 : 1975 |
Limits of sizes for ISO metric trapezoidal nut threads (Diameter Range 105 To 300 Mm) | 1 | ---- | Download | |
| 489 | IS 7727 : 1975 |
Limits of sizes for ISO metric trapezoidal bolt threads (Diameter Range 105 To 300 Mm) | 1 | ---- | Download | |
| 490 | IS 774 : 2021/ISO 17450-1:2011 (6 Revision) |
Ceramic (Vitreous China) flushing cisterns for water closets and urinals - Specification (sixth revision) | 0 | ---- | Buy | |
| 491 | IS 7859 : 1975 |
Gauge allowances and manufacturing tolerances for plain gauges for inside measurements for ISO fit sizes (Nominal Size Up To 500 mm) | 0 | ---- | Download | |
| 492 | IS 787 : 1956 |
Guide for inter - Conversion of values from one system of units to another | 0 | ---- | Download | |
| 493 | IS 7876 : 1975 |
Gauge allowances and manufacturing tolerances for plain gauges for outside measurements for ISO fit sizes (Nominal Size Up To 500 mm) | 0 | ---- | Download | |
| 494 | IS 7919 : 1975 |
Specification for refractometer - abbe type | 0 | ---- | Download | |
| 495 | SP 8 : 1970 |
Mathematical physical, chemical and engineering tables | 1 | ---- | Download | |
| 496 | IS 8000 : Part 4 : 1976 |
Tolerances of form and of position for engineering drawings: Part 4 Practical examples of indications on drawings | 1 | ---- | Download | |
| 497 | IS 8000 : Part 1 : 2019/ISO 1101:2017 (2 Revision) |
Geometrical product specifications (GPS) -- Geometrical tolerancing: Part 1 Tolerances of form, orientation, location and run-out (Second Revision) | 0 | ---- | Buy | |
| 498 | IS/IEC 80000-13 : 2008/IEC 80000-13 : 2008 |
Quantities and units: Part 13 information science and technology | 0 | ---- | Buy | |
| 499 | IS 8023 : 1991 (1 Revision) |
Gauges - Single ended progressive type plate snap gauges (Up to 160 mm) - Specification (First Revision) | 0 | ---- | Download | |
| 500 | IS 8189 : 2023/ISO 10110-5:2015 (2 Revision) |
SPECIFICATION FOR RUBBER HOSE AND HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE | 0 | ---- | Buy | |
| 501 | IS 8248 : 1976 |
Specification for antireflection coating on glass optical components | 0 | ---- | Download | |
| 502 | IS 8275 : 1976 |
Specification for binocular eyepication for microscope | 1 | ---- | Download | |
| 503 | IS 828 : Part 1 : 2023/ISO 10110-11:2016 (3 Revision) |
Cricket Bats - Specification Part 1 for Leather Ball use | 0 | ---- | Buy | |
| 504 | IS 8311 : 1976 |
Specification for instrument jewels | 1 | ---- | Download | |
| 505 | IS 8330 : 2004 (2 Revision) |
Tripods for surveying instruments - Fixed leg type - Specification (Second Revision) | 0 | ---- | Download | |
| 506 | IS 8336 : 1977 |
Specification for thermoelectric pyranometer | 4 | ---- | Download | |
| 507 | IS 8390 : 1977 |
Specification for are combs | 0 | ---- | Download | |
| 508 | IS/ISO 8573 : Part 3 : 1999/ISO 8573-3 : 1999 |
Compressed Air: Part 3 Test Methods for Measurement of Humidity | 0 | ---- | Buy | |
| 509 | IS 8622 : 1999 (1 Revision) |
Wire wound sliding contact rheostats for use in educational institutions - Specification (First Revision) | 0 | ---- | Download | |
| 510 | IS 8630 : 1977 |
Specification For Engineers Drawing Instruments, Double Line Pens | 1 | ---- | Download | |
| 511 | IS 8651 : 1977 |
Specification for flame photometer | 0 | ---- | Download | |
| 512 | IS 8661 : 1977 |
Specification for polarimeter and saccharimeter (Optical) | 0 | ---- | Download | |
| 513 | IS 8679 : 1978 |
Specification for triangular scales | 0 | ---- | Download | |
| 514 | IS 8680 : 1978 |
Specification For Engineers Drawing Instruments, Compass, Bow Pen, Double Knee Jointed with Sector Head Joints | 0 | ---- | Download | |
| 515 | IS 8681 : 1978 |
Specification For Engineers Drawing - Instruments, Compass, Bow Pencil, Double Knee Jointed with Sector Head Joints | 0 | ---- | Download | |
| 516 | IS 8691 : 1986 (1 Revision) |
Specification for mirror stereoscope (First Revision) | 0 | ---- | Download | |
| 517 | IS 8788 : 2002 (2 Revision) |
Dimensions for metric external taper and internal parallel screw threads september 2002 (Second Revision) | 0 | ---- | Download | |
| 518 | IS 8823 : 1978 |
Specification for triangular straightedges | 0 | ---- | Download | |
| 519 | IS 8841 : 1978 |
Recommendations for limits and flTs for sizes above 3 i50 mm up to io 000 mm | 0 | ---- | Download | |
| 520 | IS 8916 : 1978 |
Specification for spherometbr | 0 | ---- | Download | |
| 521 | IS 8976 : 1978 |
Guide for preparation and arrangement of sets of drawings and parts lists | 0 | ---- | Download | |
| 522 | IS 8999 : 2003/ISO 7-2 : 2000 (1 Revision) |
Pipe threads where pressure - Tight joints are made on the threads - Verification by means of limit gauges (First Revision) | 0 | ---- | Buy | |
| 523 | IS 9085 : 1979 |
Specification for correction slide for mercury barometers | 1 | ---- | Download | |
| 524 | IS 9107 : 1979 |
Specification for autocollimator | 2 | ---- | Download | |
| 525 | IS/ISO 9176 : 1988/ISO 9176 : 1988 |
Tubular technical pens - Adaptor for compasses | 0 | ---- | Buy | |
| 526 | IS/ISO 9179 : PART 1 : 1988/ISO 9179 : PART 1 : 1988 |
Technical drawings - Numerically controlled draughting machines | 0 | ---- | Buy | |
| 527 | IS/ISO 9180 : 1998/ISO 9180 : 1998 (1 Revision) |
Black leads for wood - Cased pencils - Classification and diameters | 0 | ---- | Buy | |
| 528 | IS 919 : Part 2 : 2014/ISO 286-2 : 2010 (1 Revision) |
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes: Part 2 tables of standard tolerance classes and limit deviation for holes and shafts (Second Revision) | 1 | ---- | Buy | |
| 529 | IS 919 : Part 1 : 2014/ISO 286-1 : 2010 |
Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on Linear Sizes Part 1 Basis of Tolerance, Deviation and Fits (Third Revision) | 1 | ---- | Buy | |
| 530 | IS 9246 : 2022/ISO 16792 : 2021 (1 Revision) |
Chapati Machine - Specification | 0 | ---- | Buy | |
| 531 | IS 9261 : 1979 |
Symbolization of control positions for timekeeping instruments | 0 | ---- | Download | |
| 532 | IS 9263 : Part 2 : 1999 (1 Revision) |
Wrist watches -- Jewels: Part 2 Types and dimensions (First Revision) | 0 | ---- | Download | |
| 533 | IS 9263 : Part 1 : 2015/ISO 1112 : 2009 (1 Revision) |
Horology -- Specification: Part 1 Functional and non-functional jewels (First Revision) | 0 | ---- | Buy | |
| 534 | IS 9316 : Part 8 : 2023/ISO 10110-6:2015 (1 Revision) |
METHODS OF TEST FOR RUBBER LATEX PART 8 DETERMINATION OF TOTAL IRON ISO 1657:1986 IDT | 0 | ---- | Buy | |
| 535 | IS 9440 : 1979 |
Specification for laboratory balances | 0 | ---- | Download | |
| 536 | IS 9441 : 1979 |
Specification for sextant | 0 | ---- | Download | |
| 537 | IS 9475 : 1986 (1 Revision) |
Specification for plug and ring gauges for self release 7/24 tapers (First Revision) | 0 | ---- | Download | |
| 538 | IS 9483 : 1993 (1 Revision) |
Measuring instruments - Micrometer heads - Specification (First Revision) | 0 | ---- | Download | |
| 539 | IS 9514 : 1980 |
Specification for front surface aluminized mirrors | 0 | ---- | Download | |
| 540 | IS 9529 : 1980 |
Specification for taper plug gauges and taper ring gauges to check taper bore of gauge handles and taper shanks of gauging members | 0 | ---- | Download | |
| 541 | IS 9571 : 1980 |
Specification for photoelectric colorimeter (Single Beam) | 0 | ---- | Download | |
| 542 | IS 9607 : 1980 |
Specification for tertiary level | 1 | ---- | Download | |
| 543 | IS 9608 : 1985 (1 Revision) |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size range above M40 up to and Including M120) (First Revision) | 0 | ---- | Download | |
| 544 | IS 9609 : Part 2 : 2006/ISO 3098-3 : 2000 (1 Revision) |
Technical product documentation -- Lettering: Part 2 Greek alphabet (First Revision) | 0 | ---- | Buy | |
| 545 | IS 9609 : Part 6 : 2001/ISO 3098-5 : 1997 |
Technical product documentation -- Lettering: Part 6 Cad lettering of the latin alphabet, numerals and marks | 0 | ---- | Buy | |
| 546 | IS 9609 : Part 3 : 2006/ISO 3098-4 : 2000 (1 Revision) |
Technical product documentation -- Lettering: Part 3 Diacritical and particular marks for the latin alphabet (First Revision) | 0 | ---- | Buy | |
| 547 | IS 9609 : Part 5 : 1998 |
Lettering on technical drawings: Part 5 Amplified devnagri letters | 0 | ---- | Download | |
| 548 | IS 9609 : Part 1 : 2006/ISO 3098-2 : 2000 (2 Revision) |
Technical product documentation -- Lettering: Part 1 Latin alphabet, numerals and marks (Second Revision) | 0 | ---- | Buy | |
| 549 | IS 9609 : Part 4 : 2006/ISO 3098-6 : 2000 (1 Revision) |
Technical product documentation -- Lettering: Part 4 Cyrillic alphabet (First Revision) | 0 | ---- | Buy | |
| 550 | IS 9610 : 1985 (1 Revision) |
Specification for go and no go screw ring gauges for ISO metric screw threads (Size range from M1 up to and including M100) (First Revision) | 0 | ---- | Download | |
| 551 | IS 9613 : 1980 |
Specification for primary level | 0 | ---- | Download | |
| 552 | IS 9631 : 1983 (1 Revision) |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range From M1 up to and Including M40) (First Revision) | 1 | ---- | Download | |
| 553 | IS 9641 : 1980 |
Dimensions for lugs for wrist watch case | 0 | ---- | Download | |
| 554 | IS 9642 : 1980 |
Dimensions for case pipe for wrist watch case | 0 | ---- | Download | |
| 555 | IS 9672 : 1980 |
Dimensions for movements for wrist watch | 1 | ---- | Download | |
| 556 | IS 9673 : 1980 |
Specification for crown for wrist watch case | 0 | ---- | Download | |
| 557 | IS 9680 : 1980 |
Materials for light duty springs for instrument industry | 0 | ---- | Download | |
| 558 | IS 9783 : 1981 |
Nomenclature of parts for wrist watches | 2 | ---- | Download | |
| 559 | IS/ISO 9849 : 1991/ ISO 984 |
Optics and optical instruments - Geodetic instruments - Vocabulary | 0 | ---- | Buy | |
| 560 | IS 9865 : 1981 |
Specification for laboratory weights | 0 | ---- | Download | |
| 561 | IS 988 : 1959 |
General requirements for optical components | 0 | ---- | Download | |
| 562 | IS 9892 : 1981 |
Specification for subtense bar | 0 | ---- | Download | |
| 563 | IS 9898 : 1981 |
Specification for heliotrope, surveying | 0 | ---- | Download | |
| 564 | IS/ISO 9960 : PART 1 : 1992/ISO 9960 : PART 1 : 1992 |
Draughting instruments with or without graduation: Part 1 draughting scale rules | 0 | ---- | Buy | |
| 565 | IS/ISO 9962 : PART 2 : 1992/ISO 9962 : PART 2 : 1992 |
Manually Operated Draughting Machines Part 2 Characteristics, Performance, Inspection and Marking | 0 | ---- | Buy | |
| 566 | IS/ISO 9962 : PART 1 : 1992/ISO 9962 : PART 1 : 1992 |
Manually operated draughting machines: Part 1 definitions, classification and designation | 0 | ---- | Buy | |
| 567 | IS 9972 : 2023/ISO 10110-12:2019 (2 Revision) |
Automatic Sprinkler Heads for Fire Protection Service - Specification (Second Revision) | 0 | ---- | Buy | |
| 568 | IS B196 : 1966 |
Atmospheric Conditions for Testing (Revised)(BI-LINGUAL) | 0 | ---- | Download | |
| 569 | IS B786 (Supplement) : 1967 (1 Revision) |
Conversion factors and conversion tables (First Revision) | 0 | ---- | Download | |
| 570 | IS B786 : 1967 (1 Revision) |
Guide for inter - Conversion of values from one system of units to another | 1 | ---- | Download |