Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Group : Plastic Films, Bottles, Jars, Pipes, Sockets and Other Products )
Total Standards : 305
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10124 : Part 3 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 3 Specific Requirements for Straight Reducers (Second Revision) | 0 | ---- | Download | |
| 2 | IS 10124 : Part 10 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 10 Specific Requirements for 45 Degree Bends (Second Revision) | 0 | ---- | Download | |
| 3 | IS 10124 : Part 6 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 6 Specific Requirements for Flanged Tail Pieces with Metallic Flanges (Second Revision) | 0 | ---- | Download | |
| 4 | IS 10124 : Part 13 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification Part 13 Specific Requirements for 11¼oBends PART 12 SPECIFIC REQUIREMENTS FOR 22 ½o BENDS | 0 | ---- | Download | |
| 5 | IS 10124 : Part 2 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 2 Specific Requirements for Sockets (Second Revision) | 0 | ---- | Download | |
| 6 | IS 10124 : Part 9 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 9 Specific Requirements for 60 Degree Bends (Second Revision) | 0 | ---- | Download | |
| 7 | IS 10124 : Part 5 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 5 Specific Requirements for Equal Tees (Second Revision) | 0 | ---- | Download | |
| 8 | IS 10124 : Part 12 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 12 Specific Requirements for 22½ Degree Bends (Second Revision) | 0 | ---- | Download | |
| 9 | IS 10124 : Part 1 : 2009 |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 1 General Requirements (Second Revision) | 2 | ---- | Download | |
| 10 | IS 10124 : Part 8 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 8 Specific Requirements for 90 Degree Bends (Second Revision) | 0 | ---- | Download | |
| 11 | IS 10124 : Part 4 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 4 Specific Requirements for Caps (Second Revision) | 0 | ---- | Download | |
| 12 | IS 10124 : Part 11 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 11 Specific Requirements for 30 Degree Bends (Second Revision) | 0 | ---- | Download | |
| 13 | IS 10124 : Part 7 : 2009 (2 Revision) |
Fabricated PVC-U Fittings for Potable Water Supplies - Specification: Part 7 Specific Requirements for Threaded Adaptors (Second Revision) | 0 | ---- | Download | |
| 14 | IS 1014 : 2023/ISO 19252 : 2008 (1 Revision) |
BONE MEAL STEAMED SPECIFICATION | 0 | ---- | Buy | |
| 15 | IS 10146 : 1982 |
Specification for polyethylene for its safe use in contact with foodstuffs, pharmaceuticals and drinking water | 1 | ---- | Download | |
| 16 | IS 10149 : 1982 |
Positive list of constituents of styrene polymers in contact with foodstuffs, pharmaceuticals and drinking water | 1 | ---- | Download | |
| 17 | IS 10151 : 2019 (1 Revision) |
Polyvinyl chloride (pvc) and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification (First Revision) | 1 | ---- | Download | |
| 18 | IS 10171 : 1999 (2 Revision) |
Guide on suitability of plastics for food packaging (Second Revision) | 2 | ---- | Download | |
| 19 | IS 10734 : 1983 |
Specification for case, vanity, moulded body | 0 | ---- | Download | |
| 20 | IS 10840 : 1994 (2 Revision) |
Blow moulded HDPE containers for packing of vanaspati - Specification (Second Revision) | 5 | ---- | Download | |
| 21 | IS 10889 : 2004 (1 Revision) |
High density polyethylene films (First Revision) | 1 | ---- | Download | |
| 22 | IS 10910 : 1984 |
Specification for polypropylene and its copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water | 1 | ---- | Download | |
| 23 | IS 10951 : 2020 (2 Revision) |
Specification for polypropylene (pp) materials for moulding and extrusion (Second Revision) | 3 | ---- | Download | |
| 24 | IS 10990 : Part 3 : 2023/ISO 21475 : 2019 (1 Revision) |
Technical product documentation -- Simplified representation of pipelines: Part 3 Terminal features of ventilation and drainage systems (First Revision) | 0 | ---- | Buy | |
| 25 | IS/ISO 10993 : Part 14 : 2001/ISO 1133-1 : 2022 |
Biological evaluation of medical devices Part 14 Identification and quantification of degradation products from ceramics | 0 | ---- | Buy | |
| 26 | IS 11342 : 1994/ISO 6591-2 : 1985 (1 Revision) |
Packaging - Sacks made from thermoplastic films - Description and method of measurement (First Revision) | 0 | ---- | Buy | |
| 27 | IS 11343 : 1994/ISO 6590-2 : 1986 (1 Revision) |
Packaging - Sacks made from thermoplastic films - Vocabulary (First Revision) | 0 | ---- | Buy | |
| 28 | IS 11352 : 2018 (3 Revision) |
Flexible pouches for the packing of vanaspati up to 2 kg or 2 litres - Specification (Third Revision) | 1 | ---- | Download | |
| 29 | IS 1159 : 2023/ISO 22088-4 : 2006 (2 Revision) |
Baking Powder — Specification (Second Revision) | 0 | ---- | Buy | |
| 30 | IS 11988 : 1986 |
Specification for hot seal patches | 0 | ---- | Download | |
| 31 | IS 12007 : 1987 |
Specification for laminated collapsible tubes | 2 | ---- | Download | |
| 32 | IS 12087 : 1987 |
Specification for suitcase for air and submarine crew | 0 | ---- | Download | |
| 33 | IS 12231 : 1987 |
Specification for Unplasticized PVC Pipes for Use in Suction and Delivery Lines of Agricultural Pump Sets | 1 | ---- | Download | |
| 34 | IS 12235 : Part 1 to 19 : 2004 (1 Revision) |
Thermoplastics Pipes and Fittings - Methods of Test (First Revision) | 0 | ---- | Download | |
| 35 | IS 12248 : 1988 |
Positive list of constituents of nylon-6 polymer for its safe use in contact with foodstuffs, pharmaceuticals and drinking water | 1 | ---- | Download | |
| 36 | IS 12252 : 2017 (1 Revision) |
Polyalkylene terephthalates (pet and pbt), their copolymers and list of constituents in raw materials and end products for their safe use in contact with foodstuffs and pharmaceuticals (First Revision) | 0 | ---- | Download | |
| 37 | IS 12395 : 1988 |
Specification for disposable trash bags of plastics | 2 | ---- | Download | |
| 38 | IS 12496 : 1988 |
Sizes of film for industrial radiography | 0 | ---- | Download | |
| 39 | IS 12512 : 1989 |
HDPE containers - For liquid pesticides - Capacity over 1 and up to 5 litres - Specification | 2 | ---- | Download | |
| 40 | IS 12540 : 2023 (1 Revision) |
Acrylonitrile - Specification (First Revision) | 0 | ---- | Download | |
| 41 | IS 12709 : 1994 (1 Revision) |
Glass-Fibre Reinforced Plastics (GRP) Pipes, Joints and Fittings for Use for Potable Water Supply - Specification (First Revision) | 5 | ---- | Download | |
| 42 | IS 12724 : 2004 (1 Revision) |
Flexible pouches for packing of refined edible oils up to 5 kg or 5 litre - Specification (First Revision) | 1 | ---- | Download | |
| 43 | IS 12762 : Part 14 : 2023 |
Photovoltaic devices Part 14: Guidelines for production line measurements of single-junction PV module maximum power output and reporting at standard test conditions | 0 | ---- | Download | |
| 44 | IS 12787 : 1989 |
Polyethylene air bubble film - Specification | 1 | ---- | Download | |
| 45 | IS 12818 : 2010 (2 Revision) |
Unplasticized Polyvinyl Chloride (PVC-U) Screen and Casing Pipes for Bore/Tubewells - Specification (Second Revision) | 3 | ---- | Download | |
| 46 | IS 12883 : 1989 |
Polyvinyl chloride (PVC) bottles for edible oils - Specification | 3 | ---- | Download | |
| 47 | IS 1300 : 1994 (3 Revision) |
Phenolic moulding materials - Specification (Third Revision) | 0 | ---- | Download | |
| 48 | IS 13123 : 2000 (1 Revision) |
Packing of liquid pesticides - Polyethylene terephthalate (PET) bottles (Up To 5 Litres Capacity) - Specification (First Revision) | 1 | ---- | Download | |
| 49 | IS 1324 : 2021/ISO 17422 : 2018 (2 Revision) |
Textiles - Man-Made Fibres, Yarns and Fabrics - Glossary (Second Revision) | 0 | ---- | Buy | |
| 50 | IS 13360 : Part 6 : Sec 6 : 2019/ISO 4589-1:2017 (2 Revision) |
Plastics ? Methods of Testing Part 6 Thermal Properties Section 6 Flammability by oxygen index ? General requirements ( Second Revision ) | 0 | ---- | Buy | |
| 51 | IS/ISO 13360 : Part 4 : Sec 5 : 2016/ISO 11443 : 1995 |
Plastics - Methods of Testing part 4 Rheological Properties Section 5 Determination of the Fluidity of Plastics Using Capillary and Slit-Die Rheometers | 0 | ---- | Buy | |
| 52 | IS 13360 : Part 10 : Sec 5 : 2004/ISO 119:1977 |
Plastics - Methods of testing: Part 10 Resin (Thermosetting Properties) Section 5 Phenol - Formaldehyde mouldings - Determination of free phenols - Iodometric method | 0 | ---- | Buy | |
| 53 | IS 13360 : Part 3 : Sec 2 : 1997/ISO 60:1977 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 2 determination of apparent density of material that can be poured from a specified funnel | 0 | ---- | Buy | |
| 54 | IS 13360 : Part 6 : Sec 20 : 2019/ISO 4589-3:2017 (1 Revision) |
Plastics ? Methods of Testing Part 6 Thermal Properties Section 20 Flammability by oxygen index ? Elevated temperature test ( First Revision ) | 0 | ---- | Buy | |
| 55 | IS 13360 : Part 5 : Sec 6 : 1999/ISO 7765-1:1988 |
Plastics - Methods of testing: Part 5 mechanical properties section 8 determination of impact resistance by the free - Falling dart method - Staircase methods | 0 | ---- | Buy | |
| 56 | IS 13360 : Part 11 : Sec 5 : 2001/ISO 2115:1996 |
Plastics - Methods of testing: Part 11 special properties - Section 5 determination of white point temperature and minimum film - Forming temperature | 0 | ---- | Buy | |
| 57 | IS 13360 : Part 5 : Sec 22 : 2017 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 22 determination of resistance to wear by abrasive wheels (First Revision) | 0 | ---- | Download | |
| 58 | IS 13360 : Part 6 : Sec 18 : 2013/ISO 75-3: 2004 (1 Revision) |
Plastics - Methods of testing: Part 6 thermal properties section 18 determination of temperature of deflection under load - High - Strength thermosetting laminates and long - Fibre - Reinforced plastics (First Revision) | 0 | ---- | Buy | |
| 59 | IS 13360 : Part 6 : Sec 11 : 2004/ISO 974:2000 |
Plastics - Methods of testing: Part 6 thermal properties section 11 determination of the brittleness temperature by impact | 0 | ---- | Buy | |
| 60 | IS 13360 : Part 2 : Sec 2 : 2013/ISO 295 : 2004 (1 Revision) |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens Section 2 compression moulding of test specimens of thermosetting materials (First Revision) | 0 | ---- | Buy | |
| 61 | IS 13360 : Part 9 : Sec 10 : 2018 |
Plastics - Methods of testing: Part 9 optical properties section 10 qualitative evaluation of the bleeding of colorants | 0 | ---- | Download | |
| 62 | IS 13360 : Part 3 : Sec 6 : 2000/ISO 4591:1992 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 6 film and sheeting - Determination of average thickness of a sample, and average thickness and yield of a roll by gravimetric techniques (Gravimetric Thickness) | 0 | ---- | Buy | |
| 63 | IS 13360 : Part 8 : Sec 4 : 2018 (1 Revision) |
Plastics - Methods of testing: Part 8 permanece/chemical properties section 4 determination of loss of plasticizers - Activated carbon method (First Revision) | 0 | ---- | Download | |
| 64 | IS 13360 : Part 4 : Sec 3 : 2004 |
Plastics - Methods of testing: Part 4 rhelogical properties section 3 determination of spiral flow of low - Pressure thermosetting moulding compounds | 0 | ---- | Download | |
| 65 | IS 13360 : Part 10 : Sec 4 : 2001 |
Plastics - Methods of testing: Part 10 thermosetting properties section 4 determination of gel time and peak exothermic temperature of reacting thermosetting resins | 0 | ---- | Download | |
| 66 | IS 13360 : Part 4 : Sec 1 : 2000/ISO 1133:1997 (1 Revision) |
Plastics - Methods of testing: Part 4 rheological properties section 1 determination of the melt mass - Flow rate (Mfj3)And the melt volume - Flow rate (Mvr) of thermoplastics (First Revision) | 0 | ---- | Buy | |
| 67 | IS 13360 : Part 11 : Sec 11 : 1999/ISO 3219:1993 |
Plastics - Methods of testing: Part 11 special properties section 11 polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate | 0 | ---- | Buy | |
| 68 | IS 13360 : Part 5 : Sec 12 : 2017 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 12 determination of hardness - Ball indentation method (First Revision) | 0 | ---- | Download | |
| 69 | IS 13360 : Part 5 : Sec 25 : 2004/ISO 527-4:1997 |
Plastics - Methods of testing: Part 5 mechanical properties section 25 determination of tensile properties - Test conditions for isotropic and orthotropic fibre - Reinforced plastic composites | 0 | ---- | Buy | |
| 70 | IS 13360 : Part 2 : Sec 11 : 2006/ISO 10724-2:1998 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 11 injection moulding offest specimens of thermosetting powder moulding compounds (Pmcs) - Small plates | 0 | ---- | Buy | |
| 71 | IS 13360 : Part 4 : Sec 2 : 1999 |
Plastics - Methods of testing : Part 4 Rheological properties Section 2 cup flow of phenolic and alkyd moulding materials | 0 | ---- | Download | |
| 72 | IS 13360 : Part 6 : Sec 19 : 2019/ISO 4589-2:2017 (1 Revision) |
Plastics ? Methods of Testing Part 6 Thermal Properties Section 19 Flammability by oxygen index ? Ambient temperature test ( First Revision ) | 0 | ---- | Buy | |
| 73 | IS 13360 : Part 11 : Sec 4 : 1999 |
Plastics - Methods of testing: Part 11 special properties section 4 determination of gel count of plastics film | 0 | ---- | Download | |
| 74 | IS 13360 : Part 3 : Sec 12 : 2016/ISO 1183-3 : 1999 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 12 determination of density of non - Cellular plastics - Gas pyknometer method | 0 | ---- | Buy | |
| 75 | IS 13360 : Part 5 : Sec 19 : 1999 |
Plastics - Methods of testing: Part 5 mechanical properties section 19 determination of resistance of plastic materials to abrasion | 0 | ---- | Download | |
| 76 | IS 13360 : Part 5 : Sec 2 : 2017/ISO 527-2 : 2012 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 2 determination of tensile properties - Test conditions for moulding and extrusion plastics (First Revision) | 0 | ---- | Buy | |
| 77 | IS 13360 : Part 3 : Sec 5 : 2013/ISO 2577 : 2007 (1 Revision) |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 5 thermosetting moulding materials - Determination of shrinkage (First Revision) | 0 | ---- | Buy | |
| 78 | IS 13360 : Part 8 : Sec 3 : 2018/ISO 175:2010 (1 Revision) |
Plastics - Methods of testing: Part 8 permanence / chemical properties section 3 determination of the effects of the immersion in liquid chemicals (First Revision) | 0 | ---- | Buy | |
| 79 | IS 13360 : Part 5 : Sec 10 : 2018/ISO 6383-1:2015 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 10 determination of tear resistance of plastics films and sheeting - Trouser tear method (First Revision) | 0 | ---- | Buy | |
| 80 | IS 13360 : Part 9 : Sec 5 : 1999 |
Plastics - Methods of testing: Part 9 optical properties section 5 determination of haze and luminous transmittance of transparent plastics | 0 | ---- | Download | |
| 81 | IS 13360 : Part 11 : Sec 14 : 2006/ISO 11501:1995 |
Plastics - Methods of: Part 11 special properties testing section 14 film and sheeting - Determination of dimensional change on heating | 0 | ---- | Buy | |
| 82 | IS 13360 : Part 5 : Sec 24 : 1999/ISO 7765-2:1995 |
Plastics - Methods of testing: Part 5 mechanical properties section 24 determination of impact resistance by the free - Failing dart method - Instrumented punctureTest | 0 | ---- | Buy | |
| 83 | IS 13360 : Part 8 : Sec 11 : 2018/ISO 22088-2:2006 (1 Revision) |
Plastics - Methods of testing: Part 8 performance/chemical properties section 11 determination of environmental stress cracking (Esc) - Constant - Tensile load method (First Revision) | 0 | ---- | Buy | |
| 84 | IS 13360 : Part 6 : Sec 17 : 2017/ISO 75-2 :2013 (2 Revision) |
Plastics - Methods of testing: Part 6 thermal properties section 17 determination of temperature of deflection under load - Plastics and ebonite (Second Revision) | 0 | ---- | Buy | |
| 85 | IS 13360 : Part 2 : Sec 10 : 2006/ISO 10724-1:1998 |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 10 injection moulding of test specimens of thermosetting powder moulding compounds (Pmcs) - General principles and moulding of multipurpose test specimens | 0 | ---- | Buy | |
| 86 | IS 13360 : Part 3 : Sec 9 : 1999 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 9 determination of moisture in plastics by coulometric regeneration of phosphorus pentoxide | 0 | ---- | Download | |
| 87 | IS 13360 : Part 11 : Sec 1 : 1999/ISO 8295:1995 |
Plastics - Methods of testing part 11 special properties se&on 1 film and sheeting - Determination of coefficients of friction | 0 | ---- | Buy | |
| 88 | IS 13360 : Part 5 : Sec 13 : 1992 |
Plastics - Methods of testing: Part 5 mechanical properties section 13 determination of rockwell hardness | 0 | ---- | Download | |
| 89 | IS 13360 : Part 10 : Sec 6 : 2004/ISO 120:1977 |
Plastics - Methods of testing: Part 10 resin (Thermosetting Properties) section 6 phenol - Formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Calorimetric comparison method | 0 | ---- | Buy | |
| 90 | IS 13360 : Part 3 : Sec 3 : 1997/ISO 61:1976 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 3 determination of apparent density of moulding material that cannot be poured from a specified funnel | 0 | ---- | Buy | |
| 91 | IS 13360 : Part 6 : Sec 22 : 2006/ISO 2575:1993 |
Plastics - Methods of testing: Part 6 thermal properties section 22 determination of time - Temperature limits after prolonged exposure to heat | 0 | ---- | Buy | |
| 92 | IS 13360 : Part 5 : Sec 8 : 2013/ISO 604 : 2002 |
Plastics - Methods of testing: Part 5 mechanical properties section 8 determination of compressive properties (First Revision) | 0 | ---- | Buy | |
| 93 | IS 13360 : Part 8 : Sec 14 : 2018/ISO 4611 : 2010 (1 Revision) |
Plastics - Methods of testing: Part 8 performance/chemical properties section 14 determination of the effects of exposure to damp heat, water spray and salt mist (First Revision) | 0 | ---- | Buy | |
| 94 | IS 13360 : Part 9 : Sec 1 : 2004/ISO 489:1999 |
Plastics - Methods of testing: Part 9 optical properties section 1 determination of refractive index | 0 | ---- | Buy | |
| 95 | IS 13360 : Part 11 : Sec 13 : 2006/ISO 8570:1991 |
Plastics - Methods of testing: Part 11 special properties section 13 film and sheeting - Determination of cold - Crack temperature | 0 | ---- | Buy | |
| 96 | IS 13360 : Part 5 : Sec 14 : 2001 |
Plastics - Methods of testing: Part 5 mechanical properties section 14 determination of indentation hardness of rigid plastic by means of barcol impressor | 0 | ---- | Download | |
| 97 | IS 13360 : Part 5 : Sec 23 : 1996/ISO 6383-2:1983 |
Plastics - Methods of testing: Part 5 mechanical properties section 23 determination of tear resistance of plastics film and sheeting - Elmendorf method | 0 | ---- | Buy | |
| 98 | IS 13360 : Part 6 : Sec 23 : 2006/ISO 9773:1998 |
Plastics - Methods of testing: Part 6 thermal properties section 23 determination of burning behaviour of thin fiexibie verticai specimens in contact with smaii - Fiame ignition source | 1 | ---- | Buy | |
| 99 | IS 13360 : Part 6 : Sec 14 : 2004 |
Plastics - Methods of testing: Part 6 thermal properties section 14 standard test method for coefficient of linear thermal expansion of plastics between - 30°C and 30°C with a vitreous silica dilatometer | 0 | ---- | Download | |
| 100 | IS 13360 : Part 2 : Sec 3 : 2019/ISO 294-1:2017 (1 Revision) |
Plastics ? Methods of Testing Part 2 Sampling and Preparation of Test Specimens Section 3 Injection moulding of test specimens of thermoplastic materials - General principles and moulding of multipurpose and bar test specimens ( First Revision ) | 0 | ---- | Buy | |
| 101 | IS 13360 : Part 3 : Sec 7 : 1999/ISO 1675:1985 |
Plastics - Methods of testing: Part 3 physical and dimensional properties section 7 liquid resins - Determination of density by the pyknometer method | 0 | ---- | Buy | |
| 102 | IS 13360 : Part 8 : Sec 5 : 2019/ISO 177:2016 (1 Revision) |
Plastics — Methods of testing Part 8 Permanence / Chemical Properties Section 5 Determination of migration of plasticizers ( First Revision ) | 0 | ---- | Buy | |
| 103 | IS 13360 : Part 4 : Sec 4 : 1999 |
Plastics - Methods of testing: Part 4 rheological properties section 4 determination of properties of polymeric materials by means of a capillary rheometer | 0 | ---- | Download | |
| 104 | IS 13360 : Part 2 : Sec 5 : 2018/ISO 3167:2014 (2 Revision) |
Plastics - Methods of testing: Part 2 sampling and preparation of test specimens section 5 multipurpose test specimens (Second Revision) | 0 | ---- | Buy | |
| 105 | IS 13360 : Part 10 : Sec 7 : 2004/ISO 308:1994 |
Plastics - Methods of testing: Part 10 resin (ThermosettlNg Properties) section 7 phenol - Formaldehyde mouldings - Determination of acetone - Soluble matter (Apparent Resin Content Of Material In The Unmoulded State) | 0 | ---- | Buy | |
| 106 | IS 13360 : Part 11 : Sec 7 : 2018/iso 6427 : 2013 (1 Revision) |
Plastics - Methods of testing: Part 11 special properties section 7 determination of matter extractable by organic solvents (Conventional Method) (First Revision) | 0 | ---- | Buy | |
| 107 | IS 13360 : Part 5 : Sec 11 : 2013/ISO 868 : 2003 (1 Revision) |
Plastics - Methods of testing: Part 5 mechanical properties section 11 determination of indentation hardness by means of durometer (Shore Hardness) (First Revision) | 0 | ---- | Buy | |
| 108 | IS 13410 : 1992 |
Glass reinforced polyester sheet moulding compounds(smc) - Specification | 0 | ---- | Download | |
| 109 | IS 13411 : 1992 |
Glass reinforced polyester dough moulding compounds - Specification | 0 | ---- | Download | |
| 110 | IS 13449 : 1992 |
Positive list of constituents of ethylene vinyl acetate (eva) copolymers in contact with foodstuffs, pharmaceuticals and drinking water | 0 | ---- | Download | |
| 111 | IS 13464 : 1992 |
Polyamide (nylon 66) materials for moulding and extrusion - Specification | 1 | ---- | Download | |
| 112 | IS 13576 : 1992 |
Ethylene methacrylic acid (emaa) copolymers and terpolymers for their safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification | 0 | ---- | Download | |
| 113 | IS 13577 : 1992 |
Positive list of constituents of ethylene methacrylic acid (emaa) copolymers and terpolymers in contact with foodstuffs, pharmaceuticals and drinking water | 0 | ---- | Download | |
| 114 | IS 13586 : 2023/ISO 5412 : 2022 (1 Revision) |
Carbon Brushes Brush Holders Commutators and Slip-Rings Definitions and Nomenclature | 0 | ---- | Buy | |
| 115 | IS 13592 : 2013 (1 Revision) |
Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buildings Including Ventilation and Rain Water System - Specification (First Revision) | 2 | ---- | Download | |
| 116 | IS 13593 : 1992 |
UPVC Pipe Fittings for Use with the UPVC Pipes in the Suction and Delivery Lines of Agricultural Pumps -Specification | 1 | ---- | Download | |
| 117 | IS 13601 : 1993 |
Ethylene vinyl acetate (eva) copolymers for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification | 1 | ---- | Download | |
| 118 | IS 13653 : 1992 |
Anaerobic jointing compounds for use in liquefied petroleum gas appliances and installations - Specifications | 1 | ---- | Download | |
| 119 | IS 13916 : 1994 |
Installation of Glassfibre Reinforced Plastic (GRP) Piping System - Code Of Practice | 0 | ---- | Download | |
| 120 | IS 13960 : 1994 |
Thermoplastic strappings - Specification | 0 | ---- | Download | |
| 121 | IS 14197 : 2023/ISO 24187 : 2023 (1 Revision) |
Hydraulic Turbines Storage Pumps and Pump-Turbines - Model Acceptance Tests | 0 | ---- | Buy | |
| 122 | IS 14402 : 1996 |
Glass Fibre Reinforced Plastics (GRP) Pipes, Joints and Fittings for Use for Sewerage, Industrial Waste and Water (Other than Potable) - Specification | 2 | ---- | Download | |
| 123 | IS 14421 : 1997 |
Plasticizer esters - Specification Amendment - 2 | 2 | ---- | Download | |
| 124 | IS 14425 : 1997 |
Guide for manufacture of glass reinforced polyster resin mouldings | 0 | ---- | Download | |
| 125 | IS 14426 : 1997 |
Chlorinated paraffins (cp) - Specification | 0 | ---- | Download | |
| 126 | IS 14443 : 1997 |
Polycarbonate sheets - Specification | 0 | ---- | Download | |
| 127 | IS 14500 : 1998 |
Linear low-density polyethylene (lldpe) films - Specification | 1 | ---- | Download | |
| 128 | IS 14535 : 1998 |
Recycled plastics for the manufacturing of products - Designation | 1 | ---- | Download | |
| 129 | IS 14539 : 1998 |
Insulation mill board - Specification | 0 | ---- | Download | |
| 130 | IS 14603 : 2023/ISO 13802 : 2015 (1 Revision) |
POTATO GRADER TEST CODE First Revision of IS 14603 | 0 | ---- | Buy | |
| 131 | IS 14625 : 2015 (1 Revision) |
Plastics Feeding Bottles (First Revision) | 4 | ---- | Download | |
| 132 | IS 14635 : Part 2 : 2020 |
Fluoropolymer dispersions and moulding and extrusion materials : Part 2 preparation of test specimens and determination of properties (First Revision) | 0 | ---- | Download | |
| 133 | IS 14636 : 1998 |
Flexible packaging materials for packaging of edible oils, ghee and vanaspati | 2 | ---- | Download | |
| 134 | IS 14735 : 1999 |
Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System - Specification | 5 | ---- | Download | |
| 135 | IS 14752 : 2000 |
Melamine formaldehyde resins to improve wet strength of paper - Specification | 0 | ---- | Download | |
| 136 | IS 14753 : 1999 |
Polymethyl methacrylate (pmma) (acrylic) sheets | 0 | ---- | Download | |
| 137 | IS 14787 : 2000 |
Unplasticized PVC Pipes (Ducts) and Fittings for Underground Telecommunications Cable Installation - Specification | 1 | ---- | Download | |
| 138 | IS 14829 : 2021/ISO 16620-3 : 2015 (1 Revision) |
Animal feeding stuff - Determination of water-soluble chlorides content Part 1 :Titrimetric method | 0 | ---- | Buy | |
| 139 | IS/ISO 14853 : 2016/ISO 14853 (1 Revision) |
Plastics - Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system - Method by measurement of biogas production | 0 | ---- | Buy | |
| 140 | IS/ISO 14855 : PART 1 : 2000/ISO 14855-1:2012 (1 Revision) |
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide: Part 1 general method (First Revision) | 0 | ---- | Buy | |
| 141 | IS 14962 : Part 4 : 2023/ISO 29664 : 2010 (1 Revision) |
ISO General purpose metric screw threads - Tolerances Part 4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing (First revision of IS 14962( Part 4 ) ) | 0 | ---- | Buy | |
| 142 | IS 14972 : 2001 |
Positive list of constituents of polycarbonate resins in contact with foodstuffs, pharmaceuticals and drinking water | 0 | ---- | Download | |
| 143 | IS 14996 : 2001 |
Positive list of constituents of modified poly (phenylene oxide) (ppo) in contact with foodstuffs, pharmaceuticals and drinking water | 0 | ---- | Download | |
| 144 | IS 14997 : 2001 |
Modified poly (phenylene oxide) (ppo) resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification | 0 | ---- | Download | |
| 145 | IS 14998 : 2001 |
Positive list of constituents of melamine-formaldehyde resins in contact with foodstuffs, pharmaceuticals and drinking water | 0 | ---- | Download | |
| 146 | IS 14999 : 2001 |
Melamine-formaldehyde resins for its safe use in contact with foodstuffs, pharmaceuticals and drinking water - Specification | 0 | ---- | Download | |
| 147 | IS/ISO 15070 : 1996/ISO 16620-2 : 2019 |
Series 1 Freight Containers - Rationale for Structural Test Criteria | 0 | ---- | Buy | |
| 148 | IS 15265 : 2003 |
Flexible PVC Pipes or Polymer Reinforced Thermoplastic Hoses for Suction and Delivery Lines of Agricultural Pumps - Specification | 2 | ---- | Download | |
| 149 | IS 15328 : 2003 |
Unplasticized Non-Pressure Polyvinyl Chloride (PVC-U) Pipes for Use in Underground Drainage and Sewerage Systems - Specification | 7 | ---- | Download | |
| 150 | IS 15473 : 2004 |
Blow moulded HDPE containers for packaging of edible oils - Specification | 1 | ---- | Download | |
| 151 | IS 15532 : 2004 |
Plastics crates for fruits and vegetables - Specification | 1 | ---- | Download | |
| 152 | IS 15609 : 2005 |
Polyethylene flexible pouches for the packing of natural mineral water and packaged drinking water - Specification | 2 | ---- | Download | |
| 153 | IS 15621 : 2005 |
Tetrabromobisphenol-a - Specification | 0 | ---- | Download | |
| 154 | IS 15623 : 2005 |
Melamine (2, 4, 6 triamino 1, 3, 5 triazine) - Specification | 1 | ---- | Download | |
| 155 | IS 15653 : 2021/ISO 16620-5 : 2017 (1 Revision) |
Reciprocating internal combustion engine - Vocabulary - Terms for engine maintenance | 0 | ---- | Buy | |
| 156 | IS 15680 : 2021/ISO 16014-1 : 2019 (1 Revision) |
Guidelines for selection of steam traps First revision of IS 15680 | 0 | ---- | Buy | |
| 157 | IS 15749 : 2007 |
Fluorinated HDPE bottles and containers - Specification | 0 | ---- | Download | |
| 158 | IS 15778 : 2007 |
Chlorinated Polyvinyl Chloride (CPVC) Pipes for Potable Hot and Cold Water Distribution Supplies - Specification | 5 | ---- | Download | |
| 159 | IS 15801 : 2008 |
Polypropylene - Random Copolymer Pipes for Hot and Cold Water Supplies - Specification | 1 | ---- | Download | |
| 160 | IS 15844 (Part 1) : 2023/ISO 22088-5 : 2006 (1 Revision) |
Sports footwear Part 1 General Purpose (First Revision) Amendment - 2 | 2 | ---- | Buy | |
| 161 | IS 15927 : PART 3 : 2011 |
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification: Part 3 Electro Fusion Fittings | 0 | ---- | Download | |
| 162 | IS 15927 : PART 2 : 2012 |
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification: Part 2 Spigot Fittings for Butt Fusion for Socket Fusion Using Heated Tools and for Use with Electro Fusion Fittings | 0 | ---- | Download | |
| 163 | IS 15927 : Part 1 : 2012 |
Polyethylene Fittings for Use with Polyethylene Pipes for the Supply of Gaseous Fuels - Specification: Part 1 Fittings for Socket Fusion Using Heated Tools | 0 | ---- | Download | |
| 164 | IS/ISO 15985 : 2014/ISO 15985 : 2014 (1 Revision) |
Plastics - Determination of the ultimate anaerobic biodegradation under high - Solids anaerobic - Digestion conditions - Method by analysis of released biogas (First Revision) | 0 | ---- | Buy | |
| 165 | IS 15999 : Part 3 : 2023/ISO 17541 : 2014 (1 Revision) |
ROTATING ELECTRICAL MACHINES Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators first revision | 0 | ---- | Buy | |
| 166 | IS 16098 Part 2 : 2013 |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage – Specification: Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B | 3 | ---- | Download | |
| 167 | IS 16098 Part 1 : 2013 |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage - Specification: Part 1 Pipes and Fittings with Smooth External Surface, Type A | 3 | ---- | Download | |
| 168 | IS 16130 : 2014/ISO 12162 : 2009 |
Thermoplastics Materials for Pipes and Fittings for Pressure Applications - Classification, Designation and Design Coefficient | 0 | ---- | Buy | |
| 169 | IS 16154 : 2014 |
Water soluble film - Specification | 0 | ---- | Download | |
| 170 | IS 16267 : 2021/ISO 22404 : 2019 (1 Revision) |
Information and documentation -- Management systems for records -- Requirements First Revision | 0 | ---- | Buy | |
| 171 | IS 16268 : 2017/ISO/TR 10358 : 1993 |
Plastic Pipes and Fittings - Combined Chemical-Resistance Classification Table | 0 | ---- | Buy | |
| 172 | IS 16459 : 2016/ISO 17557 : 2003 |
Plastics - Film and sheeting - Cast polypropylene (pp) films | 1 | ---- | Buy | |
| 173 | IS 16462 : 2016/ISO 9080 : 2012 |
Plastic Piping and Ducting Systems - Determination of the Long-Term Hydrostatic Strength of Thermoplastics Materials in Pipe Form by Extrapolation | 0 | ---- | Buy | |
| 174 | IS 16581 : 2018 |
High density polyethylene (HDPE)/polypropylene (PP) woven sacks for packing of solid ammonium nitrate for explosives - Specification | 0 | ---- | Download | |
| 175 | IS 16591 : Part 2 : 2016/ISO 18263-2 : 2015 |
Plastics - Mixtures of polypropylene (pp) and polyethylene (pe) recyclate derived from pp and pe used for flexible and rigid consumer packaging : Part 2 preparation of test specimens and determination of properties | 0 | ---- | Buy | |
| 176 | IS 16591 : Part 1 : 2016/ISO 18263-1 : 2015 |
Plastics - Mixtures of polypropylene (pp) and polyethylene (pe) recyclate derived from pp and pe used for flexible and rigid consumer packaging : Part 1 designation system and basis for specification | 1 | ---- | Buy | |
| 177 | IS 16621 : 2017 |
Positive list of constituents of polyethylene and polypropylene in contact with foodstuffs, pharmaceuticals and drinking water | 0 | ---- | Download | |
| 178 | IS 16647 : 2017 |
Oriented Unplasticized Polyvinyl Chloride (PVC-O) Pipes for Water Supply - Specification | 1 | ---- | Buy | |
| 179 | IS 16738 : 2018 |
Positive list of constituents for polypropylene, polyethylene and their copolymers for its safe use in contact with foodstuffs and pharmaceuticals | 3 | ---- | Download | |
| 180 | IS 16792 : Part 1 : Sec 4 : 2023/ISO 23517 : 2021 (1 Revision) |
Measurement Procedures for Materials Used in Photovoltaic Modules Part 1: Encapsulants Section 4 Measurement of Optical Transmittance and Calculation of the Solar-Weighted Photon Transmittance Yellowness Index and UV Cut-Off Wavelength (First Revision) | 0 | ---- | Buy | |
| 181 | IS 16864 : 2018 |
Polycarbonate protective shield - Specification | 0 | ---- | Download | |
| 182 | IS/ISO/IEC/TS 17021 : Part 14 : 2022/ISO 22088-6 : 2006 |
Conformity assessment Requirements for bodies providing audit and certification of management systems Part 14: Competence requirements for auditing and certification of management systems for records | 0 | ---- | Buy | |
| 183 | IS 17077 : Part 2 : 2020 |
Plastics - Acrylonitrile-butadiene-styrene (abs) moulding and extrusion materials : Part 2 preparation of test specimens and determination of properties | 1 | ---- | Download | |
| 184 | IS 17216 : 2019 |
Polyethylene mulch films for agriculture and horticulture - Specification | 1 | ---- | Download | |
| 185 | IS 17230 : 2019 |
Plastic carry case for storage, transportation and carriage of voter verifiable paper audit trail (vvpat) printer - Specification | 0 | ---- | Download | |
| 186 | IS 17397 : Part 3 : 2020/ISO 16365-3:2014 |
Plastics - Thermoplastic polyurethanes for moulding and extrusion : Part 3 distinction between ether and ester polyurethanes by determination of the ester group content | 0 | ---- | Buy | |
| 187 | IS 17397 : Part 2 : 2020/ISO 16365-2:2014 |
Plastics - Thermoplastic polyurethanes for moulding and extrusion : Part 2 preparation of test specimens and determination of properties | 0 | ---- | Buy | |
| 188 | IS 17423 : 2021/ISO/TR 21960 : 2020 (1 Revision) |
Medical Textiles — Bio-Protective Coveralls — Specification (First Revision) | 1 | ---- | Buy | |
| 189 | IS/ISO 17480 : 2015/ISO 8256: 2004 |
Packaging — Accessible Design — Ease of Opening | 0 | ---- | Buy | |
| 190 | IS 17480 : 2020 |
High density polyethylene multi squeezable tube for packaging - Specification | 2 | ---- | Download | |
| 191 | IS 17536 : Part 3 : 2021/ISO 16014-2 : 2019 |
Ships and marine technology - Servicing of inflatable life-saving appliances - Part 3: Inflatable lifejackets | 0 | ---- | Buy | |
| 192 | IS 17550 : Part 1 : 2021/ISO 16620-4 : 2016 |
Household Refrigerating Appliances - Characteristics and Test Methods Part 1 General Requirements | 0 | ---- | Buy | |
| 193 | IS 17577 : 2021 |
Reliability and availability evaluation of HVDC systems | 0 | ---- | Download | |
| 194 | IS 17585 : 2021/ISO 16014-3 : 2019 |
Beta (Outflow) valves for gravity type flushing cisterns - Specification | 0 | ---- | Buy | |
| 195 | IS 17589 : 2021/ISO 16014-4 : 2019 |
Specification for Water Packs for use as ice-packs, cool-packs and warm-packs, Requirements and Test methods | 0 | ---- | Buy | |
| 196 | IS 17618 : Part 3 : 2021/ISO 4892-2:2013 |
TASAR RAW SILK GRADING AND METHODS OF TESTS PART 3 WINDING TEST | 0 | ---- | Buy | |
| 197 | IS 17618 : Part 6 : 2021/ISO 9370: 2017 |
TASAR RAW SILK GRADING AND METHODS OF TESTS PART 6 COHESION TEST | 0 | ---- | Buy | |
| 198 | IS 17618 : Part 2 : 2021/ISO 4892-1: 2016 |
TASAR RAW SILK GRADING AND METHODS OF TESTS PART 2 VISUAL AND TACTUAL EXAMINATION | 0 | ---- | Buy | |
| 199 | IS 17618 : Part 5 : 2021/ISO 4892-4:2013 |
TASAR RAW SILK GRADING AND METHODS OF TESTS PART 5 TENACITY AND ELONGATION TEST | 0 | ---- | Buy | |
| 200 | IS 17618 : Part 4 : 2021/ISO 4892-3:2016 |
TASAR RAW SILK GRADING AND METHODS OF TESTS PART 4 SIZE TEST | 0 | ---- | Buy | |
| 201 | IS 17668 : 2021/ISO 16014-5 : 2019 |
Infant formula and adult nutritionals Determination of free and total choline and free and total carnitine Liquid chromatography tandem mass spectrometry HPLC-MSMS | 0 | ---- | Buy | |
| 202 | IS 17675 : Part 3 : 2021 |
Guidelines for Treated Wastewater Use for Irrigation Projects Part 3 Components of a Reuse Project for Irrigation | 0 | ---- | Download | |
| 203 | IS 17682 : 2021/ISO 22766 : 2020 |
Aluminium Composite Panel - Specification Amendment - 2 | 2 | ---- | Buy | |
| 204 | IS 17700 : 2021/ISO 18830 : 2016 |
Dentistry Handpieces and motors | 0 | ---- | Buy | |
| 205 | IS 17726 : 2021/ISO 22403 : 2020 |
WOOD PULP-SPECIFICATION | 0 | ---- | Buy | |
| 206 | IS 17729 : 2021/ISO 13975 : 2019 |
Agro-Textiles Flexible Water Storage Tank for Agriculture and Horticulture Purposes Specification | 0 | ---- | Buy | |
| 207 | IS 18114 : 2023 |
Terrestrial Photovoltaic (PV) Modules - Quality System for PV Module Manufacturing (First Revision) | 0 | ---- | Download | |
| 208 | IS 18273 : Part 1 : 2023/ISO 10640 : 2011 |
Molecular biomarker analysis? Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR? Part 1: Bovine DNA detection method | 0 | ---- | Buy | |
| 209 | IS 18273 : Part 2 : 2023/ISO 483 : 2005 |
Molecular biomarker analysis? Detection of animal-derived materials in foodstuffs and feedstuffs by real-time PCR? Part 2: Ovine DNA detection method | 0 | ---- | Buy | |
| 210 | IS/ISO 18758 : Part 1 : 2018 |
Mining and earth-moving machinery Rock drill rigs and rock reinforcement rigs Part 1: Vocabulary Adoption of ISO 18758 | 0 | ---- | Download | |
| 211 | IS 19018 : 2022/ISO 5677 : 2023 |
Svarnapatri Cassia senna L Leaves for use in Traditional Medicine Specifications | 0 | ---- | Buy | |
| 212 | IS 1998 : 1962 |
Methods of test for thermosetting synthetic resin bonded laminated sheets | 0 | ---- | Download | |
| 213 | IS/ISO 20200 : 2015/ISO 20200:2015 (1 Revision) |
Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory - Scale test (First Revision) | 0 | ---- | Buy | |
| 214 | IS 2036 : 1995 (2 Revision) |
Phenolic laminated sheets - Specification (Second Revision) | 1 | ---- | Download | |
| 215 | IS 2076 : 1981 (1 Revision) |
Specification for unsupported flexible polyvinyl chloride sheeting (First Revision) | 1 | ---- | Download | |
| 216 | IS 2080 : 2021/ISO 10210 : 2012 (2 Revision) |
Specification for stabilized hydrogen peroxide (Second Revision) | 0 | ---- | Buy | |
| 217 | IS 2221 : 1962 |
Methods of test for aminoplastic moulding materials | 0 | ---- | Download | |
| 218 | IS 2249 : 1984 (1 Revision) |
Specification for adhesives (liquid) for leather-beltings (First Revision) | 0 | ---- | Download | |
| 219 | IS 2500 : Part 5 : 2021 (1 Revision) |
Sampling procedures for inspection by attributes -- Part 4: Procedures for assessment of declared quality levels ( First Revision) | 0 | ---- | Download | |
| 220 | IS 2530 : 1963 |
Methods of test for polyethylene moulding materials and polyethylene compounds | 0 | ---- | Download | |
| 221 | IS 2543 : 1995 (1 Revision) |
Cellulose secondary acetate materials for moulding and extrusion - Specification (First Revision) | 0 | ---- | Download | |
| 222 | IS 2622 : 2023/ISO 21702 : 2019 (3 Revision) |
Brush Banister (Hand Sweeping) single - Specification (Third Revision) | 0 | ---- | Buy | |
| 223 | IS 2798 : 1998 (1 Revision) |
Methods of test for plastics containers (First Revision) | 2 | ---- | Download | |
| 224 | IS 2828 : 2019/ISO 472 : 2013 (2 Revision) |
Plastics - Vocabulary (Second Revision) | 1 | ---- | Buy | |
| 225 | IS/ISO/IEC 30118 : Part 8 : 2021 |
Information technology Open Connectivity Foundation OCF Specification Part 8: OCF resource to oneM2M resource mapping specification | 0 | ---- | Download | |
| 226 | IS 3383 : 2023 (3 Revision) |
SULPHUR WETTABLE POWDERS SPECIFICATION | 0 | ---- | Download | |
| 227 | IS 3389 : 1994 (1 Revision) |
Urea-formaldehyde moulding materials - Specification (First Revision) | 1 | ---- | Download | |
| 228 | IS 3434 : 1984 (1 Revision) |
Glossary of terms for adhesives and pressure sensitive adhesive tapes (First Revision) | 0 | ---- | Download | |
| 229 | IS 3669 : 1994 (1 Revision) |
Melamine-formaldehyde moulding materials - Specification (First Revision) | 1 | ---- | Download | |
| 230 | IS 3693 : 1966 |
Specification for plastic spectacle frames | 0 | ---- | Download | |
| 231 | IS 3730 : 1988 (1 Revision) |
Specification for high density polyethylene bucket (First Revision) | 0 | ---- | Download | |
| 232 | IS 3958 : 2021 (2 Revision) |
Methods Of Sampling Cosmetics | 0 | ---- | Download | |
| 233 | IS 4253 : Part 2 : 2008 (2 Revision) |
Cork composition sheets - Specification: Part 2 cork and rubber (Second Revision) | 2 | ---- | Download | |
| 234 | IS 4253 : Part 1 : 2008 (2 Revision) |
Cork composition sheets - Specification: Part 1 plain cork sheets (Second Revision) | 0 | ---- | Download | |
| 235 | IS/ISO/TR 44000 : 2019 |
PRINCIPLES FOR SUCCESSFUL COLLABORATIVE BUSINESS RELATIONSHIP MANAGEMENT | 0 | ---- | Download | |
| 236 | IS 4665 : Part 2 : Sec 3 : 2023/ISO 6603-1 : 2000 |
Hand-held motor-operated electric tools - Safety Part 2 Particular requirements Section 3 grinders polishers and disk-type sanders | 0 | ---- | Buy | |
| 237 | IS 4669 : 1968 |
Methods of test for polyvinyl chloride resins | 0 | ---- | Download | |
| 238 | IS 4761 : 1968 |
Specification for unsupported pvc rainwear | 1 | ---- | Download | |
| 239 | IS 4946 : 2021 (1 Revision) |
Textile dyestuffs — Method for evaluation of strength and shade of naphthol (first revision) | 0 | ---- | Download | |
| 240 | IS 4984 : 2016 (5 Revision) |
Polyethylene Pipes for Water Supply - Specification (Fifth Revision) | 2 | ---- | Download | |
| 241 | IS 5182 : Part 2 : Sec 1 : 2023/ISO 16012 : 2015 |
METHODS FOR MEASUREMENT OF AIR POLLUTION Part 2 Sulphur Dioxide Section 1 Tetrachloromercurate Pararosaniline method | 0 | ---- | Buy | |
| 242 | IS 5210 : 1995 (1 Revision) |
High impact polystyrene sheet - Specification (First Revision) | 1 | ---- | Download | |
| 243 | IS 5322 : 1988 (1 Revision) |
Specification for high density polyethylene wash-bowls (First Revision) | 0 | ---- | Download | |
| 244 | IS 5378 : 1994 (1 Revision) |
Polyethylene cane - Specification (First Revision) | 0 | ---- | Download | |
| 245 | IS 5508 : Part 15 : 2021/ISO 21301-2 : 2019 |
Guide for fishing gear Part 15: 350 m Purse seine (first revision) | 0 | ---- | Buy | |
| 246 | IS 5508 : Part 16 : 2021 |
Guide for fishing gear Part 16: 450 m Purse seine (first revision) | 0 | ---- | Download | |
| 247 | IS 5508 : Part 17 : 2021/ISO 24026-2 : 2020 |
Guide for fishing gear Part 17: 35 m Bulged belly trawl net (first revision) | 0 | ---- | Buy | |
| 248 | IS/IEC/IEEE 60079 : Part 30 : Sec 2 : 2015/ISO 15314 : 2018 (1 Revision) |
Explosive atmospheres - Part 30 Electrical resistance trace heating Section 2 Application guide for design, installation and maintenance (First revision) | 0 | ---- | Buy | |
| 249 | IS/IEC 60556 : 2016/ISO 5424 : 2022 |
Gyromagnetic materials intended for application at microwave frequencies Measuring methods for properties | 0 | ---- | Buy | |
| 250 | IS/IEC 60603 : Part 5 : 1987 |
Connectors for frequencies below 3 MHz for use with printed boards Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2.54 mm (0.1 in) spacing | 0 | ---- | Download | |
| 251 | IS/IEC 60721 : Part 3 : Sec 2 : 2018 |
Classification of Environmental Conditions Part 3 Classification of Groups of Environmental Parameters and their Severities Section 2 Transportation and handling | 0 | ---- | Download | |
| 252 | IS/IEC/TS 60870 : Part 5 : Sec 7 : 2013 |
Telecontrol equipment and systems Part 5-7: Transmission protocols Security extensions to IEC 60870-5-101 and IEC 60870-5-104 protocols applying IEC 62351 | 0 | ---- | Download | |
| 253 | IS/IEC 61196 : Part 1 : Sec 324 : 2006/ISO 19679 : 2016 |
Coaxial communication cables Part 1-324 Mechanical Test Methods — Test for Abrasion Resistance of Cable | 0 | ---- | Buy | |
| 254 | IS/IEC 61744 : 2005/ISO 16620-1 : 2015 |
CALIBRATION OF FIBRE OPTIC CHROMATIC DISPERSION TEST SETS | 0 | ---- | Buy | |
| 255 | IS/IEC 62858 : 2019/ISO 18872 : 2007 |
Lightning density based on lightning location systems General principles | 0 | ---- | Buy | |
| 256 | IS 6312 : 1994 (2 Revision) |
Polyethylene containers for the transport of materials - Specification (Second Revision) | 2 | ---- | Download | |
| 257 | IS 6367 : 1971 |
Specification for dextrin for adhesive industry | 0 | ---- | Download | |
| 258 | IS 6444 : 2023/ISO 22196 : 2011 (2 Revision) |
Sulphur Dusting Powders - Specification second revision | 0 | ---- | Buy | |
| 259 | IS 6746 : 1994 (1 Revision) |
Unsaturated polyester resin systems - Specification (First Revision) | 0 | ---- | Download | |
| 260 | IS 6879 : 2021 (1 Revision) |
Textiles - Fabric for target banner radar responsive - Specification (first revision) | 0 | ---- | Download | |
| 261 | IS 6997 : 2021 (1 Revision) |
Test code for sugarcane crushers | 0 | ---- | Download | |
| 262 | IS 7019 : 1998 (2 Revision) |
Glossary of terms in plastics and flexible packaging, excluding paper (Second Revision) | 0 | ---- | Download | |
| 263 | IS 7166 : 1985 (1 Revision) |
Specification for cellulose secondary acetate flakes (First Revision) | 0 | ---- | Download | |
| 264 | IS 7188 : 1974 |
Methods of test for cellulose acetate flakes | 0 | ---- | Download | |
| 265 | IS 7328 : 2020 (3 Revision) |
Specification for polyethylene material for moulding and extrusion (Third Revision) | 2 | ---- | Download | |
| 266 | IS 7408 : Part 3 : 2000 (1 Revision) |
Blow moulded polyolefin containers - Specification: Part 3 : closed head containers over 60 litres, up to and including 250 litres capacity (First Revision) | 3 | ---- | Download | |
| 267 | IS 7408 : Part 2 : 2000 (1 Revision) |
Blow moulded polyolefin containers - Specification: Part 2 : over 5 litres, up to and including 60 litres capacity (First Revision) | 2 | ---- | Download | |
| 268 | IS 7408 : Part 1 : 2000 (2 Revision) |
Blow moulded polyolefin containers - Specification: Part 1 : up to 5 litres capacity (Second Revision) | 2 | ---- | Download | |
| 269 | IS 7437 : 1974 |
Methods of sampling and test for vegetable adhesives | 0 | ---- | Download | |
| 270 | IS 7634 : Part 2 : 2012 (1 Revision) |
Plastics Pipes Selection, Handling, Storage and Installation for Potable Water Supplies - Code of Practice: Part 2 Laying and Jointing of Polyethylene (PE) Pipes (First Revision) | 0 | ---- | Download | |
| 271 | IS 7634 : Part 1 : 1975 |
Code of Practice for Plastics Pipe Work for Potable Water Supplies: Part 1 Choice of Materials and General Recommendations | 1 | ---- | Download | |
| 272 | IS 7634 : Part 3 : 2003 (1 Revision) |
Plastics Pipe Selection, Handling, Storage and Installation for Potable Water Supplies - Code of Practice: Part 3 Laying and Jointing of UPVC Pipes (First Revision) | 0 | ---- | Download | |
| 273 | IS 7714 : 1975 (1 Revision) |
Method of sealability test for gasket materials | 0 | ---- | Download | |
| 274 | IS 7803 : Part 2 : 1975 |
Specification for plastic containers for pharmaceutical use - Part II : parenteral and ophthalmic preparations | 1 | ---- | Download | |
| 275 | IS 7803 : Part 1 : 1975 |
Specification for plastic containers for pharmaceutical use - Part 1 : other than parenteral and ophthalmic preparations | 2 | ---- | Download | |
| 276 | IS 7834 : Part 3 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 3 Specific Requirements for 90 Degree elbows (First revision) | 0 | ---- | Download | |
| 277 | IS 7834 : Part 6 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 6 Specific Requirements for Sockets (First Revision) | 0 | ---- | Download | |
| 278 | IS 7834 : Part 8 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 8 Specific Requirements for Caps (First Revision) | 0 | ---- | Download | |
| 279 | IS 7834 : Part 2 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 2 Specific Requirements for 45 Degrees Elbows (First Revision) | 0 | ---- | Download | |
| 280 | IS 7834 : Part 5 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies : Part 5 Specific Requirements for 45 degree Tees (First Revision) | 0 | ---- | Download | |
| 281 | IS 7834 : Part 1 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 1 General requirements (First Revision) | 1 | ---- | Download | |
| 282 | IS 7834 : Part 4 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 4 Specific Requirements for 90 Degree Tees (First Revision) | 0 | ---- | Download | |
| 283 | IS 7834 : Part 7 : 1987 (1 Revision) |
Specification for Injection Moulded PVC Socket Fittings with Solvent Cement Joints for Water Supplies: Part 7 Specific Requirements for Unions (First Revision) | 0 | ---- | Download | |
| 284 | IS 8028 : 2023/ISO 16869 : 2008 (2 Revision) |
QUINALPHOS EMULSIFIABLE CONCENTRATE SPECIFICATION second revision | 0 | ---- | Buy | |
| 285 | IS 8085 : Part 3 : 2021 |
Methods of Test for Footwear Part 3 Upper Sole Adhesion | 0 | ---- | Download | |
| 286 | IS 8402 : 1987 (1 Revision) |
Methods of sampling and test for pressure sensitive adhesive tapes (First Revision) | 0 | ---- | Download | |
| 287 | IS 8440 : 2023/ISO 22088-1 : 2006 (1 Revision) |
PADDY CLEANERS TEST CODE | 0 | ---- | Buy | |
| 288 | IS 853 : 2023/ISO 6603-2 : 2023 (1 Revision) |
BONE MEAL RAW SPECIFICATION | 0 | ---- | Buy | |
| 289 | IS 8543 : Part 1 : Sec 1 : 1978 |
Methods of testing plastics: Part 1 characterization of polymer structure and size section 1 determination of molecular mass from viscosity | 0 | ---- | Download | |
| 290 | IS 8543 : Part 13 : Sec 1 : 1977 |
Methods of testing plastics: Part 13 tests for specific products section 1 buttons (Thermosetting) | 0 | ---- | Download | |
| 291 | IS 867 : 1963 |
Methods of test for phenolic moulding materials (Revised) | 0 | ---- | Download | |
| 292 | IS 8688 : 1988 (2 Revision) |
Plastics bottles for potable water - Specification (Second Revision) | 2 | ---- | Download | |
| 293 | IS 8958 : 2023 (1 Revision) |
Fluchloralin, technical concentrates- Specification First Revision | 0 | ---- | Download | |
| 294 | IS 9271 : 2004 (1 Revision) |
Unplasticized Polyvinyl Chloride (UPVC) Single Wall Corrugated Pipes for Drainage - Specification (First Revision) | 3 | ---- | Download | |
| 295 | IS 9766 : 1992 (1 Revision) |
Flexible pvc compounds - Specification (First Revision) | 0 | ---- | Download | |
| 296 | IS 9833 : 2018 (2 Revision) |
List of colourants for use in plastics in contact with foodstuffs and pharmaceuticals (Second Revision) | 2 | ---- | Download | |
| 297 | IS 9843 : 1991 (1 Revision) |
Code of practice for use of adhesives for packaging (First Revision) | 0 | ---- | Download | |
| 298 | IS 9845 : 1998 (2 Revision) |
Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision) | 0 | ---- | Download | |
| 299 | IS 9848 : 1987 (1 Revision) |
Specification for briefcases, plastic body (First Revision) | 0 | ---- | Download | |
| 300 | IS 9873 : Part 7 : 2017/ISO 8124-7 : 2015 |
Safety of toys: Part 7 requirements and test methods for finger paints | 1 | ---- | Buy | |
| 301 | IS 9873 : Part 5 : 2017/ISO 8124-5:2015 |
Safety of toys: Part 5 determination of total concentration of certain elements in toys | 0 | ---- | Buy | |
| 302 | IS 9873 : Part 9 : 2017 |
Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children's Products | 0 | ---- | Download | |
| 303 | IS 9873 : Part 8 : 2019/ISO/ TR 8124-8:2016 |
Safety of toys: Part 8 age determination guidelines | 0 | ---- | Buy | |
| 304 | IS 9873 : Part 4 : 2017/ISO 8124-4:2014 |
Safety of toys: Part 4 swings, slides and similar activity toys for indoor and outdoor family domestic use | 1 | ---- | Buy | |
| 305 | IS 9944 : 2023 (2 Revision) |
Textiles - Natural and man - made fibre rope slings - Recommendations for safe working loads (second revision) | 0 | ---- | Download |