Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 7206:1986

IS Title/आईएस शीर्षक : General requirements for direct circulation rotary drilling rigs: Part 1 with rotary table (First Revision) (Withdrawn)

Superseded by IS/प्रतिस्थापित आईएस : 7206 : 2024

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 1

Number of Amendments/संशोधनों की संख्या : 1

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : MED (Mechanical Engineering Department)

Technical Committee/तकनीकी समिति : MED 21 (Diamond Core And Waterwell Drilling Sectional Committee)

Member Secretary/सदस्य सचिव : SHUBHAM YADAV (SCIENTIST-C)

Other Details

Gazette Document : 4

Click to download

Classification details for: IS 7206 : Part 1 : 1986

Click to view

Cross Reference Details

Click to view

Cross Reference Details

Indian Standards Referred In IS IS 7206:1986
:

1	IS 402:1990	Cold chisels - Specification (Third Revision)	PGD 34
2	IS 694:2010	Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1 100 V (Fourth Revision)	ETD 09
3	IS 800:2007	General construction in steel - Code of practice (Third Revision)	CED 07
4	IS 802 (Part 1/Sec 1):2015	Use of structural steel in overhead transmission line towers - Code of practice: Part 1 materials, loads and design strengths: sec 1 materials and loads (Fourth Revision)	CED 07
5	IS 844 (Part 1):1979 ISO 2380/1	Specification for screwdrivers: Part 1 techincal supply conditions (Second Revisionn)	PGD 34
6	IS 844 (Part 2):1979 ISO 2380/1	Specification for screwdrivers: Part 2 dimensions (Second Revision)	PGD 34
7	IS 844 (Part 3):1979	Specification for screw drivers: Part 3 dimensions for screw drivers for recessed head screws (Second Revision)	PGD 34
8	IS 1161:2014	Steel tubes for structural purposes - Specification (Fifth Revision)	MTD 19
9	IS 1269 (Part 2):1997 Decision taken to Reaffirm and Archive	Legal metrology - Material measures of length: Part 2 steel tape measures	PGD 26
10	IS 1480:1970 Reviewed In : 2024 Reaffirmed but not taken up for revision	Specification metric scales for general purposes (First Revision)	PGD 22
11	IS 1481:2024	Specification for metric steel scales for engineers (First Revision)	PGD 22
12	IS 1554 (Part 1):1988	Specification for PVC insulated (Heavy Duty) electric cables: Part 1 for working voltages up to and including 1 100 V (Third Revision)	ETD 09
13	IS 18265:2023 ISO 10552:2014	Steel wire ropes for haulage purposes - Specification Fourth Revision	MED 10
14	IS 1931:2000 Decision taken to Reaffirm and Archive	ENGINEER’S FILES — SPECIFICATION ( Third Revision)	PGD 34
15	IS 2028:2026	Open jaw wrenches (Spanners) - Specification (Fijih Revision)	PGD 34
16	IS 2029:2026	Ring wrenches (Spanners) - Specification (Fourth Revision)	PGD 34
17	IS 2030:1989 ISO 2236	Box spanners - Specification (Second Revision)	PGD 34
18	IS 2062 (Part 1):2025	Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)	MTD 04
19	IS 2266:2024	Steel wire ropes for general engineering purpose - Specification (Fifth Revision)	MED 10
20	IS 2594:2003 Decision taken to Reaffirm and Archive	Hacksaw blades -- Specification (second revision)	PGD 32
21	IS 3082:2026	Assembly tools for screws and nuts - hexagon socket screw keys (Third Revision)	PGD 34
22	IS 3650:2026	Specification for combination side cutting pliers (Second Revision)	PGD 34
23	IS 3961 (Part 2):2017	Recommended current ratings for cables: Part 2 PVC insulated and PVC sheathed heavy duty cables (First Revision)	ETD 09
24	IS 3961 (Part 3):1968	Recommended current ratings for cables: Part 3 rubber insulated cables	ETD 09
25	IS 4003 (Part 1):2026	Specification for pipe wrenches: Part 1 general purpose (First Revision)	PGD 34
26	IS 4123:2024	Specification for chain pipe wrenches (First Revision)	PGD 34
27	IS 4561 (Part 1):1968 Reaffirmed but not taken up for revision	Specification for oil cans: Part 1 light duty oil cans	PGD 19
28	IS 4561 (Part 2):1968 Reaffirmed but not taken up for revision	Specification for oil cans: Part 2 conical oil cans	PGD 19
29	IS 4561 (Part 3):1968 Reaffirmed but not taken up for revision	Specification for oil cans: Part 3 feeding oil cans	PGD 19
30	IS 4561 (Part 4):1968 Reaffirmed but not taken up for revision	Specification for oil cans: Part 4 detachable spout oil cans	PGD 19
31	IS 4561 (Part 5):1968 Reaffirmed but not taken up for revision	Specification for oil cans: Part 5 lever type oil cans	PGD 19
32	IS 5169:1986	Specification for hacksaw frames (First Revision)	PGD 34
33	IS 5706:1993	Optical instruments - Spirit levels for use in precision engineering - Specification (First Revision)	PGD 39
34	IS 6149:2025	Single-Ended Open-Jaw Adjustable Wrenches Specification	PGD 34
35	IS 7794:2025	Specification for manual portable grease guns	PGD 19
36	IS 9181:1988	Specification for C - Clamps (First Revision)	PGD 34
37	IS 9439 : 2022	Glossary of Terms Used in Water-well Drilling Technology	MED 21
38	IS 9968 (Part 1):2025	Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision)	ETD 09
39	IS 9968 (Part 2):2002	Specification for elastomer - Insulated cables: Part 2 for working voltages from 3.3 kV up to and including 33 kV (First Revision)	ETD 09
40	IS 10002:1981 ISO 3046	Specification for performance requirements for constant speed compression ignition (Diesel) engines for general purposes (Above 20 KW)	TED 02
41	IS 12360:2026	Voltage bands for electrical installations including preferred voltages and frequency	ETD 01
42	IS 12615:2026	Line Operated Three Phase a.c. Motors ( IE CODE ) “Efficiency Classes and Performance Specification” ( Third Revision )	ETD 15
43	IS/ISO 26262-10:2018 ISO 26262-10:2018	Amendment no. 1 to IS/ISO 20932 (Part 3) : 2018 Textiles - Determination of the elasticity of fabrics Part 3 Narrow fabrics	TXD 01
44	IS 16491 (Part 1):2024 ISO 13385-1:2019	Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 1 calipers; design and metrological characteristics	PGD 25
45	IS 18995 (Part 4):2025 ISO 7787-4:2002	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 1 GENERAL RULES	ETD 07
46	IS/IEC 60947-2:2016 IEC 60947-2 : 2016	Low - Voltage switchgear and controlgear: Part 2 circuit - Breakers (First Revision)	ETD 07
47	IS/IEC 60947 : PART 3 : 2020	Low-Voltage Switchgear and Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors and Fuse-Combination Units	ETD 07
48	IS/IEC 60947 : Part 4 : Sec 1 : 2018	Low-Voltage switchgear and controlgear : Part 4-1 Contactors and motor starters electromechanical contactors and motor-Starters	ETD 07
49	IS/ISO 56007:2023 ISO 56007:2023	Low-Voltage switchgear and Controlgear: Part 4-2 Contactors and Motorstarters semiconductor motor controllers starters and Soft starters	ETD 07
50	IS 19206 (Part 4):2025 10349-4: 1992	Low-Voltage Switchgear And Controlgear: Part 4-3 Contactors And Motor-Starters Semiconductor Controllers And Semiconductor Contactors For Non-Motor Loads	ETD 07

International Standards Referred In IS 7206:1986

Standard contains no Cross Referenced International Standard.

IS 7206:1986
is Referred in following Indian Standards :

1	IS 9968 : Part 1 : 1988	Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision)	ETD 09

Classification Details

Certification	:
Group	:	Gases, Gas Cylinders , Machine tools and other mechanical products
Sub Group	:	Conveyors, hoisting and lifting equipments and rope ways
Sub Sub Group	:	Mining tools
Aspect	:	Product Specification

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Gazette Document : 4

Classification details for: IS 7206 : Part 1 : 1986

Cross Reference Details

Cross Reference Details

Classification Details