Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 2347:2023

IS Title/आईएस शीर्षक : DOMESTIC PRESSURE COOKER - SPECIFICATION (Seventh Revision)

Superseding IS/सुपरसीडिंग आईएस : IS 2347 : 2017

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 7

Number of Amendments/संशोधनों की संख्या : 2

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : MED (Mechanical Engineering Department)

Technical Committee/तकनीकी समिति : MED 33 (Utensils, Cutlery And Domestic Hardware Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. LOKRAJ MEENA (SCIENTIST-C)

QCO Notified & Implemented
Implemented On::01-02-2021 Summary/सारांश
Test Method Video/परीक्षण विधि वीडियो

Other Details

1	IS 21:2025	Wrought aluminium and aluminium alloys for manufacture of utensils specification (Fourth Revision)	MTD 7
2	IS 228 (Part 1):2025	Methods for chemical analysis ofsteels: Part 1 determination ofcarbon by volumetric method (For Carbon 0.05to 2.50 Percent) (Third Revision)	MTD 34
3	IS 228 (Part 2):2024	Methods for chemical analysis of steels part 2 determination of manganese in plain - Carbon and low alloy steels by arsenite method (Third Revision)	MTD 34
4	IS 228 (Part 3):2024	Methods for chemical analysis 6f steels: Part 3 determination of phosphorus by alkalimetric method (Third Revision	MTD 34
5	IS 228 (Part 4):2025	Method for chemical analysis of steels: Part 4 determination of total carbon by gravimetric method (For Carbon R 0.1 Percent) (Third Revision)	MTD 34
6	IS 228 (Part 5):1987	Methods for chemical analysis of steels: Part 5 determination of nickel by dimethylglyoxime (Gravimetric) method (For Nickel)O - l percent) (Third Revision)	MTD 34
7	IS 228 (Part 6):2024	Methods for chemical analysis of steels: Part 6 determination of - Chromium by persulphate oxidation method (For Chromium â‰¥ 0.1 percent) (Third Revision)	MTD 34
8	IS 228 (Part 8):1989	Methods for chemicalanalysisofsteels: Part 8 determination of silicon by the gravimetric method (For Silicon 0.05 To 5.00 Percent) (Third Revision)	MTD 34
9	IS 228 (Part 9):1989	Methods for chemical analysis of steels : Part 9 determination of sulphur by evolution method (For Sulphur 0.01 To 0.25 Percent) (Third Revision)	MTD 34
10	IS 228 (Part 11):1990	Methods for chemical analysis of steels : Part 11 determination of total silicon by reduced molybdosilicate spectrophotometric method in carbon steels and low alloy steels (For Silicon 0.01 To 0.05 Percent) (Third Revision)	MTD 34
11	IS 228 (Part 12):2001	Methods for chemical of steels analysis: Part 12 determination of manganese by periodate spectrophotometric method in plain carbon, low alloy and high alloy steels (For Manganese 0.01 To 5.0 Percent) (Fourth Revision)	MTD 34
12	IS 228 (Part 14):1988	Methods for chemical analysis of steels: Part 14 determination of carbon by thermal conductivity method (For Carbon 0.005 To 2.000 Percent	MTD 34
13	IS 17808 (Part 1):2022 ISO 22744-1:2020	Methods for Chemical Analysis of Steels - Part 20 : Determination of Carbon and Sulphur by Infra Red Absorption Method (for Carbon 0.005 to 2 Percent and Sulphur 0.001 to 0.35 Percent)	MTD 34
14	IS 302 (Part 1):2024 IEC 60335-1: 2020	Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)	ETD 32
15	IS 302 (Part 2/Sec 15):2009 IEC 60335-2-15	Safety of household and similar electrical appliances: Part 2 particular requirements: Sec 15 appliances for heating liquids (First Revision)	ETD 32
16	IS 319:2007	Free cutting brass bars, rods and section - Specification (Fifth Revision)	MTD 8
17	IS 733:1983	Specification for wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes) (Third Revision)	MTD 7
18	IS 739:1992	Wrought aluminium and aluminium alloys - Wire for general engineering purposes - Specification (Third Revision)	MTD 7
19	IS 740:1977	Specification for wrought aluminium and aluminium alloy rivet stock for general engineering purposes (Second Revision)	MTD 7
20	IS 1068:2025 ISO 1456:2009	Electroplated coatings of nickel plus chromium and copper plus nickel plus chromium - Specification (Third Revision)	MTD 24
21	IS 1342:2019 Reviewed In : 2024 Decision taken to Reaffirm and Archive	Oil pressure stoves - Specification (Seventh Revision)	MED 26
22	IS 4246:2025	Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)	MED 23
23	IS 4454 (Part 4):2001	Steel wires for mechanical springs: Part 4 stainless steel wire (Second Revision)	MTD 16
24	IS 4905:2015 ISO 24153 : 2009	Random sampling and randomization procedures (First Revision)	MSD 3
25	IS 5522:2014	Stainless steel sheets and strips for utensils - Specification (Third Revision)	MTD 16
26	IS 5523:1983	Methods of testing anodic coatings on aluminium and its alloys (First Revision)	MTD 24
27	IS 6012:1992	Measurement of coating thickness by eddy current method (First Revision)	MTD 24
28	IS 6057:1988	Specification for hard anodic coatings on aluminium and aluminium alloys (First Revision)	MTD 24
29	IS 6527:1995	Stainless steel wire rods - Specification (First Revision)	MTD 16
30	IS 6528:2024	Stainless steel wire - Specification (First Revision)	MTD 16
31	IS 6603:2024	Stainless steel bars and flats - Specification (First Revision)	MTD 16
32	IS 6911:2017	Stainless steel plate, sheet and strip - Specification (Second Revision)	MTD 16
33	IS 19122:2025	Rubber Gasket for Pressure Cooker - Specification ( Second Revision )	PCD 13
34	IS 9730:2008	Non - Stick unreinforced plastics coatings on domestic cooking utensils - Specification (First Revision)	MED 33
35	IS 9806:2001	Methods of test for and permissible limits of toxic materials released from ceramicware, vitreous enamelware, glassware and glass - Ceramicware in contact with food (First Revision)	CHD 9
36	IS 17556:2021 ISO 5521:1981	Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )	MED 33
37	IS 15960:2013	Composite bottom stainless steel cooking utensils - Specification	MED 33
38	IS 15997:2012	Low nickel austenitic stainless steel plate, sheet, and strip for utensils and kitchen appliances - Specification	MTD 16

International Standards Referred In IS 2347:2023

Standard contains no Cross Referenced International Standard.

IS 2347:2023
is Referred in following Indian Standards :

1	IS 13395 : 1995	Performance of handles and handle assemblies attached to cookware - Specification	MED 33
2	IS 17675 : Part 4 : 2021	Guidelines for Treated Wastewater Use for Irrigation Projects Part 4 Monitoring	EED 3
3	IS/ISO 20932 : Part 1 : 2018	Textiles - Determination of the elasticity of fabrics Part 1 Strip tests	TXD 1

Classification Details

Group	:	Household Products Appliances(non-electrical)
Sub Group	:	Cooking Utensils
Sub Sub Group	:	Utensils and Cutlery
Aspect	:	Product Specification
Certification	:	Mandatory Certification
Relevant Ministries	:	Ministry of Commerce and Industry - Department for Promotion of Industry and Internal Trade (DPIIT)
Sustainable development Goals :
Short Commom Man's Title	:
ITC-HS Code	:
Degree of Equivalence	:	Indigenous
Identical/Equivalent International Standard(s)	:
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
2	Licensees email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 2347 : 2023

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 2

Gazette Document : 16

License : 315

Product Manual & SIT : 1

Laboratory : 32

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 2347 : 2023

List of Expired or Cancelled Licenses under IS : IS 2347 : 2023

List of laboratories for : IS 2347 : 2023

List of Amendement(s) for : IS 2347 : 2023

List of Gazette Document(s) for : IS 2347 : 2023

List of Corigenda Document(s) for : IS 2347 : 2023

List of Product Manuals & SIT