Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 5522 : 2014
Reviewed In : 2024

IS Title/आईएस शीर्षक : Stainless steel sheets and strips for utensils - Specification (Third Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 3

Number of Amendments/संशोधनों की संख्या : 2

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष : April, 2024

Technical Department/तकनीकी विभाग : MTD (Metallurgical Engineering Department)

Technical Committee/तकनीकी समिति : MTD 16 (Alloy Steels and Forging Sectional Committee Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. RAM SAI KUMAR GEDELA (SCIENTIST-C)

Other Details

1	IS 228 : 1959 Reviewed In : 1997	Methods of chemical analysis of pig iron, cast iron and plain carbon and low alloy steel	MTD 7
2	IS 228 (Part 1) : 1987 Reviewed In : 2023	Methods for chemical analysis ofsteels: Part 1 determination ofcarbon by volumetric method (For Carbon 0.05to 2.50 Percent) (Third Revision)	MTD 34
3	IS 228 (Part 10) : 1989 Reviewed In : 2023	Methods for chemical analysis of steels: Part 10 determination of molybdenum by thiocyanate (Photometric) method in low and high alloy steels (For Molybdenum 0.01 To 1.50 Percent) (First Revision)	MTD 34
4	IS 228 (Part 11) : 1990 Reviewed In : 2024	Methods for chemical analysis of steels : Part 11 determination of total silicon by reduced molybdosilicate spectrophotometric method in carbon steels and low alloy steels (For Silicon 0.01 To 0.05 Percent) (Third Revision)	MTD 34
5	IS 228 (Part 12) : 2001 Reviewed In : 2023	Methods for chemical of steels analysis: Part 12 determination of manganese by periodate spectrophotometric method in plain carbon, low alloy and high alloy steels (For Manganese 0.01 To 5.0 Percent) (Fourth Revision)	MTD 34
6	IS 228 (Part 13) : 1982 Reviewed In : 2024	Methods for chemical analysis of steels: Part 13 determination of arsenic	MTD 34
7	IS 228 (Part 14) : 1988 Reviewed In : 2023	Methods for chemical analysis of steels: Part 14 determination of carbon by thermal conductivity method (For Carbon 0.005 To 2.000 Percent	MTD 34
8	IS 228 (Part 15) : 1992 Reviewed In : 2023	Methods for chemical analysis of steels: Part 15 determination of copper by thiosulphate iodide method (For Copper 0.05 To 5 Percent) (Second Revision)	MTD 34
9	IS 228 (Part 16) : 1992 Reviewed In : 2023	Methods for chemical analysis of steels: Part 16 determination of tungsten by spectrophotometric method (For Tungsten 0.1 To 2 Percent) (Second Revision)	MTD 34
10	IS 228 (Part 17) : 1998 Reviewed In : 2021	Methods for chemical analysis of steels: Part 17 determination of nitrogen by thermal conductivity method (For Nitrogen Up To 0.04 Percent) (Second Revision)	MTD 34
11	IS 228 (Part 18) : 1998 Reviewed In : 2023	Methodsofchemicalanalysis ofsteels: Part 18 determination of oxygen by instrumental method (For Oxygen 0.001 To 0.1000 Percent) (Second Revision)	MTD 34
12	IS 228 (Part 19) : 1998 Reviewed In : 2021	Methods of chemical analysis of steels: Part 19 determination of nitrogen by steam distillation method (For Nitrogen 0.002 To 0.50 Percent) (Second Revision)	MTD 34
13	IS 228 (Part 2) : 2024	Methods for chemical analysis of steels part 2 determination of manganese in plain - Carbon and low alloy steels by arsenite method (Third Revision)	MTD 34
14	IS 228 (Part 20) : 2021	Methods for chemical analysis of steels: Part 20 determination of carbon and sulphur by infra red absorption method (For Carbon 0.005 To 2 Percent And Sulphur 0.001 To 0.35 Percent) (Second Revision)	MTD 34
15	IS 228 (Part 21) : 2003 Reviewed In : 2023	Methods for chemical analysis of steels: Part 21 determination of copper by spectrophotometric method (For Copper 0.02 To 0.50 Percent) (Second Revision)	MTD 34
16	IS 228 (Part 22) : 2003 Reviewed In : 2023	Methods of chemical analysis of steels: Part 22 determination of total hydrogen in steel by thermal conductivity method (Hydrogen 0.1 Ppm To 50 Ppm)	MTD 34
17	IS 228 (Part 24) : 2003 Reviewed In : 2023	Methods of chemical analysis of steels: Part 24 determination of nitrogen in steel by inert gas fusion - Thermal conductivity method (Nitrogen 0.001 To 0.2 Percent)	MTD 34
18	IS 228 (Part 23) : 2003 Reviewed In : 2023	Methods of chemical analysis of steels: Part 23 determination of total nitrogen in steel by optical emission spectrometer (Nitrogen 0.002 To 1.0 Percent)	MTD 34
19	IS 228 (Part 3) : 2024	Methods for chemical analysis 6f steels: Part 3 determination of phosphorus by alkalimetric method (Third Revision	MTD 34
20	IS 228 (Part 4) : 1987 Reviewed In : 2023	Method for chemical analysis of steels: Part 4 determination of total carbon by gravimetric method (For Carbon R 0.1 Percent) (Third Revision)	MTD 34
21	IS 228 (Part 5) : 1987 Reviewed In : 2023	Methods for chemical analysis of steels: Part 5 determination of nickel by dimethylglyoxime (Gravimetric) method (For Nickel)O - l percent) (Third Revision)	MTD 34
22	IS 228 (Part 6) : 1987 Reviewed In : 2023	Methods for chemical analysis of steels: Part 6 determination of - Chromium by persulphate oxidation method (For Chromium)04 percent) (Third Revision)	MTD 34
23	IS 228 (Part 7) : 1990 Reviewed In : 2023	Methods for chemical analysis of steels: Part 7 determination of molybdenum by alpha - Benzoinoxime method in alloy steels (For molybdenum 1 percent and not containing tungsten) (Third Revision)	MTD 34
24	IS 228 (Part 8) : 1989 Reviewed In : 2023	Methods for chemicalanalysisofsteels: Part 8 determination of silicon by the gravimetric method (For Silicon 0.05 To 5.00 Percent) (Third Revision)	MTD 34
25	IS 228 (Part 9) : 1989 Reviewed In : 2023	Methods for chemical analysis of steels : Part 9 determination of sulphur by evolution method (For Sulphur 0.01 To 0.25 Percent) (Third Revision)	MTD 34
26	IS 1387 : 1993 Reviewed In : 2024	General requirements for the supply of metallurgical materials (Second Revision)	MTD 4
27	IS 1501 (Part 1) : 2020 ISO 6507-1 : 2018	Metallic Materials — Vickers Hardness Test Part 1 Test Method ( Fifth Revision )	MTD 3
28	IS 1586 : 2000 Reviewed In : 2010	Method for Rockwell Hardness Test for Metallic Material (Scales A-B-C-D-E-F-G-H-K 15N, 30N, 45N, 15T, 30T and 45T)	MTD 3
29	IS 1608 : 2005 IS 1608:2005 / ISO 6892:1998 Reviewed In : 2017	Mechanical testing of metals - Tensile Testing	MTD 3
30	IS 1663 : 1972	Method for tensile testing of steel sheet and strip of thickness 0.5 mm to 3 mm	MTD 3
31	IS 1762 (Part 1) : 1974 Reviewed In : 2024	Code for designation of steels: Part 1 based on letter symbols (First Revision)	MTD 4
32	IS 1956 (Part 4) : 2013 Reviewed In : 2024	Glossary of terms relating to iron and steel: Part 4 flat products (Second Revision)	MTD 4
33	IS 10175 : 2018 ISO 20482:2013 Reviewed In : 2023	Metallic materials - Sheet and strip - Erichsen cupping test (Third Revision)	MTD 3

International Standards Referred In IS 5522 : 2014
Reviewed In : 2024

Standard contains no Cross Referenced International Standard.

IS 5522 : 2014
Reviewed In : 2024 is Referred in following Indian Standards :

1	IS 6047 : 2009	Scouring products for utensil cleaning - Specification (First Revision)
2	IS 6521 : Part 1 : 1972	Code of practice for design of tower cranes: Part 1 static and rail amounted	MED 14
3	IS 15960 : 2013	Composite bottom stainless steel cooking utensils - Specification	MED 33
4	IS 10865 : 1998	Wrist watches -- Spring bars for watch cases and straps -- Specification (First Revision)	PGD 23
5	IS 2787 : 2006	Oil pressure heaters - Specification (Third Revision)	MED 26
6	IS 7066 : 1973	Specification for trays, instrument - Cabinet, dental	MHD 8
7	IS B12397 : 1988	Specification for metallic dissecting trays	PGD 22
8	IS 12397 : 1988	Specification for metallic dissectiong trays	PGD 22
9	IS 2486 : Part 1 : 1993	Metal fittings of insulators for overhead power lines with nominal voltage greater than 1 000 V - Specification: Part 1 general requirements and tests (Second Revision)	ETD 6
10	IS 5973 : 1998	Pan Evaporimeter - Specification (First Revision)	PGD 21
11	IS 4670 : 1993	Legal Metrology - Liquor Measures - Specification (First Revision)	PGD 26
12	IS 12889 : 2018	Performance evaluation of materials used for liquid penetrant test (First Revision)	MTD 21
13	IS 9516 : 1980	Specification for heat resisting steels	MTD 16
14	IS 6911 : 2017	Stainless steel plate, sheet and strip - Specification (Second Revision)	MTD 16
15	IS 9462 : 1980	Specification for humidifier, nebulizing, ventury type	MHD 11
16	IS 12996 : 1990	Internal combustion engines radiator pressure caps - Specification	TED 2
17	IS 3993 : 1993	Trays, instruments - Specification (Second Revision)	MHD 12
18	IS 3994 : 1993	Bowls,wash - Specification (Second Revision)	MHD 12
19	IS 2492 : 2019	Stainless Steel Road Milk Tankers — Specification ( Second Revision )	FAD 33
20	IS 2689 : 2019	Stainless Steel Batch Pasteurizer — Specification ( First Revision )	FAD 33
21	IS 15500 : PART 1 : 2004	DEEPWELL HANDPUMPS, COMPONENTS AND SPECIAL TOOLS SPECIFICATION	MED 27
22	IS 15935 : 2021	Composite Cylinders for On-Board Storage of Compressed Natural Gas ( CNG ) as a Fuel for Automotive Vehicle - Specification ( First Revision )	MED 16
23	IS 15799 : 2021	Methods for testing tar and bituminous materials - Ageing of bitumen (RTFO and PAV tests) (First Revision)	PCD 6
24	IS 17605 : 2021	Carbon fibre Determination of size content	TXD 40
25	IS/ISO 18250 : Part 3 : 2018	Medical devices - Connectors for reservoir delivery systems for healthcare applications - Part 3 Enteral Applications	MHD 14
26	IS 4768 : 1981	Specification for stainless steel buckets (First Revision)	MED 33
27	IS 14756 : 2017	Stainless steel cookware - Specification (First Revision)	MED 33
28	IS 13036 : 1991	Textiles – Apparatus for testing colour fastness of textile materials to washing, laundering and dry-cleaning – Specification	TXD 5
29	IS 17675 : Part 4 : 2021	Guidelines for Treated Wastewater Use for Irrigation Projects Part 4 Monitoring	EED 2
30	IS/ISO 20932 : Part 1 : 2018	Textiles - Determination of the elasticity of fabrics Part 1 Strip tests	TXD 1
31	IS 7185 : 1981	Specification for boiler, milk aluminium (First Revision)	MED 33
32	IS 17694 : 2021	Dentistry Polymer-based pit and fissure sealants	MHD 8
33	IS 4822 : 1981	Specification for brass cooking utensils (First Revision)	MED 33
34	IS 9246 : 1979	Specification for chapati machine	MED 33
35	IS 6591 : 1972	Specification for rail milk tankers	FAD 19
36	IS 3661 : 2019	Bulk Milk Cooling Tanks — Specification ( First Revision )	FAD 19
37	IS 1608 : Part 1 : 2022	Metallic materials - Tensile testing - Part 1 : Method of test at room temperature	MTD 3
38	IS 2347 : 2017	Domestic pressure cooker - Specification (Sixth Revision)	MED 33
39	IS 4493 : Part 2 : 2022	Hollow Metallic Waveguides Part 2 Relevant specifications for ordinary rectangular waveguides First Revision	LITD 6
40	IS 17992 : 2022	Superabsorbent polymer - Sodium polyacrylate resin for hygiene products - Specification	PCD 12
41	IS 3593 : 2022	Solvent Extracted Rice Bran (DeOiled Rice Bran) as Livestock Feed Ingredient ï¿½ Specification	FAD 5
42	IS 1660 : 2009	Wrought aluminium utensils - Specification (First Revision)	MED 33
43	IS 6969 : 1973	Code For Hygienic Conditions For Handling And Sale Of Refrigerated Drinking Water	FAD 14
44	IS 1475 : Part 1 : 2001	Self - Contained drinking water coolers - Specification: Part 1 energy consumption and performance (Third Revision)	MED 3

Classification Details

Group	:	Metals, Alloys and Metal Products (including Steel Products)
Sub Group	:	Steel and Steel Castings, Wires, Ropes, Pipes , Tubes and other products
Sub Sub Group	:	Hot rolled steel sheet & plates
Aspect	:	Product Specification
Certification	:	Mandatory Certification
Relevant Ministries	:	Ministry of Steel, Ministry of Commerce and Industry - Department for Promotion of Industry and Internal Trade (DPIIT)
Sustainable development Goals :
Short Commom Man's Title	:	Stainless steel sheets and strips for utensils
ITC-HS Code	:	77.140.20;
Degree of Equivalence	:	Indigenous
Identical/Equivalent International Standard(s)	:
Harmonized with	:

ID	Mailing list	Download
1	Committee members email list	Download
2	Licensees email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 5522 : 2014

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 2

Gazette Document : 2

License : 10

Product Manual & SIT : 1

Laboratory : 15

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 5522 : 2014

List of Expired or Cancelled Licenses under IS : IS 5522 : 2014

List of laboratories for : IS 5522 : 2014

List of Amendement(s) for : IS 5522 : 2014

List of Gazette Document(s) for : IS 5522 : 2014

List of Corigenda Document(s) for : IS 5522 : 2014

List of Product Manuals & SIT