Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 101 (Part 3/Sec 2):2025
ISO 2808 : 2019

IS Title/आईएस शीर्षक : Methods of Sampling and Test for Paints Varnishes and Related Products Part 3 Tests on Paint Film Formation Sec 2 Determination of film thickness (Fourth Revision)

Superseding IS/सुपरसीडिंग आईएस : IS 101 : Part 3 : Sec 2 : 1989

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : 4

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Methods of tests

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : CHD (Chemical Department)

Technical Committee/तकनीकी समिति : CHD 20 (Paints, Varnishes And Related Products Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. PUSHPENDRA KUMAR (SCIENTIST-C)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 2

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 101 (Part 3/Sec 2):2025
ISO 2808 : 2019
:

1	IS 1745:2018 Reaffirmed but not taken up for revision	Petroleum hydrocarbon solvents - Specification (Third Revision)	PCD 3
2	IS 101 (Part 1/Sec 3):1986	Methods of sampling and test for paints, varnishes and related products: Part 1 tests on liquid paints (general and physical): Sec 3 preparation of panels	CHD 20

International Standards Referred In IS 101 (Part 3/Sec 2):2025
ISO 2808 : 2019

1	ISO 3611 : 0 : 0 0
2	ISO 4618 : 0 : 0 0
3	ISO 8503 : 1 : 0 0

IS 101 (Part 3/Sec 2):2025
ISO 2808 : 2019
is Referred in following Indian Standards :

1	IS 2339 : 2013	Aluminium paints for general purposes - Specification (First Revision)	CHD 20
2	IS 14209 : 2016	Epoxy enamel, two component, glossy - Specification (First Revision)	CHD 20
3	IS 13184 : 1991	Mastic filler, epoxy based - Specification	CHD 20
4	IS 14506 : 1998	Epoxy redoxide zinc phosphate weldable primer,two component - Specification	CHD 20
5	IS 14589 : 1999	Zinc priming paint, epoxy based, two - Pack - Specification	CHD 20
6	IS 14946 : 2001	Zinc ethyl silicate primer, two components - Specification	CHD 20
7	IS 14948 : 2001	Paint coal tar epoxy, two pack, black and brown (Base and Hardner) - Specification	CHD 20
8	IS 101 : Part 5 : Sec 2 : 1988	Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical tests: Sec 2 flexibility and adhesion (Third Revision)	CHD 20
9	IS 101 : Part 5 : Sec 4 : 1988	Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 4 Print free test (Third Revision)	CHD 20
10	IS 101 : Part 7 : Sec 1 : 1989	Methodsof sampling and test for paints, varnishes and related produdTs: Part 7 environmental tests on paint films: Sec 1 resistance to water (Third Revision)	CHD 20
11	IS 101 : Part 7 : Sec 2 : 1990	Methods of sampling and test for paints,varnishes and related products: Part 7 environmental tests on paint films: Sec 2 resistance to liquids (Third Revision)	CHD 20
12	IS 15659 : Part 1 : 2006	Petroleum and natural gas industries - External coatings for burried or submerged pipelines used in pipeline transportation of gas and liquid hydrocarbons: Part 1 polyolefin coatings (3 Layer PE And 3 Layer PP)	MTD 24
13	IS 17044 : 2018	Intumescent fire retardant paint (Water Based) - Specification	CHD 20
14	IS 101 : Part 5 : Sec 3 : 2019	Methods of sampling and test for paints, varnishes and related products: Part 5 mechanical tests: Sec 3 impact resistance - falling - weight test, large - Area indenter (Fifth Revision)	CHD 20
15	IS 101 : Part 5 : Sec 5 : 2019	Methods of sampling and test for paints, varnishes and related products: Part 5 Mechanical tests: Sec 5 Impact resistance - Falling - weight test, small - area indenter	CHD 20
16	IS 16854 : 2018	Single pack zinc rich coating for cold application - Specification	MTD 24
17	IS 101 : Part 4 : Sec 4 : 2020	Methods of Sampling and Test for Paints, Varnishes and Related Products : Part 4 optical test : Sec 4 gloss - determination of gloss value at 20 C, 60 C, and 80 C ( Fourth Revision )	CHD 20
18	IS 101 : Part 7 : Sec 3 : 2020	Methods of sampling and test for paints, varnishes and related products: Part 7 environmental tests on paint films: Sec 3 determination of the effect of heat ( Fourth Revision )	CHD 20
19	IS 15935 : 2011	Composite cylinders for on - Board storage of compressed natural gas (CNG) as a fuel for automotive vehicle - Specification	MED 16
20	IS 16943 : 2019	Two components high build epoxy micaceous iron oxide (MIO) pigmented intermediate coat - Specification	CHD 20
21	IS 16944 : 2018	Two components high build epoxy titanium dioxide (TiO2) pigmented intermediate coat - Specification	CHD 20
22	IS 16942 : 2018	Silicone soya alkyd exterior paint - Specification	CHD 20
23	IS 3521 : 1999	Industrial safety belts and harnesses - Specification (Third Revision)	CHD 8
24	IS/ISO 23828 : 2013	FUEL CELL ROAD VEHICLES - ENERGY CONSUMPTION MEASUREMENT - VEHICLES FUELLED WITH COMPRESSED HYDROGEN	TED 26
25	IS 13238 : 1991	Epoxy based zinc phosphate primer (Two Pack) - Specification	CHD 20
26	IS 13871 : 1993	Powder coatings - Specification	CHD 20
27	IS 16143 : Part 7 : 2021	Hard coal and coke - Mechanical sampling : Part 7 methods for determining the precision of sampling, sample preparation and testing (First Revision)	PCD 7
28	IS 17454 : 2020	Guidelines and General Requirement of Sanitary Napkin Vending Machine	TXD 14
29	IS 17952 : Part 1 : 2022	Inflatable boats - Part 1: Boats with a maximum motor power rating of 4.5 kW	TED 18
30	IS 5528 : 1985	Method of testing corrosion resistance of electroplated and anodized aluminium coating by copper accelerated acetic acid salt spray (CASS) test (First Revision)	MTD 24
31	IS 16676 : 2017	Solventless liquid epoxy system for application on interior and exterior surfaces of steel water pipeline - Specification	CHD 20

Classification Details

Group	:	Building Materials including Paints
Sub Group	:	Pigments, Paints and Accessories
Sub Sub Group	:	Brushes for painting
Aspect	:	Methods of tests
Certification	:	Not Certifiable
Relevant Ministries	:	Ministry of Chemicals and Fertilizers - Department of Chemicals and Petrochemicals (DCPC)
Sustainable development Goals :
Short Commom Man's Title	:
ITC-HS Code	:
Degree of Equivalence	:	Identical under dual numbering
Identical/Equivalent International Standard(s)	:	ISO 2808 : 2019
Harmonized with	:	ISO

ID	Mailing list	Download
1	Committee members email list	Download
3	Additional mailing list	Download

List of Licenses under IS : IS 101 : Part 3 : Sec 2 : 2025

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

ID	Licence No.	Firm Name & Address	District	State	Validity Date	Status	Variety	Brand Name	Scale

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 2

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details

Email Ids

List of Licenses under IS : IS 101 : Part 3 : Sec 2 : 2025

List of Expired or Cancelled Licenses under IS : IS 101 : Part 3 : Sec 2 : 2025

List of laboratories for : IS 101 : Part 3 : Sec 2 : 2025

List of Amendement(s) for : IS 101 : Part 3 : Sec 2 : 2025

List of Gazette Document(s) for : IS 101 : Part 3 : Sec 2 : 2025

List of Corigenda Document(s) for : IS 101 : Part 3 : Sec 2 : 2025

List of Product Manuals & SIT