Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 15474 (Part 3/Sec 5):2018
IEC 60300-3-5 : 2001

IS Title/आईएस शीर्षक : Dependability Management Part 3 Application Guide Section 5 Reliability Test Conditions and Statistical Test Principles

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Code of Practice

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : LITD (Electronics and Information Technology Department)

Technical Committee/तकनीकी समिति : LITD 02 (Dependability of Electronic, Electrical Components, Equipment and Systems Sectional Committee)

Member Secretary/सदस्य सचिव : Priyanshu Sharma

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 1

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 15474 (Part 3/Sec 5):2018
IEC 60300-3-5 : 2001
:

1	IS 11137 (Part 2):2012 IEC 60812: 2006	Analysis techniques for system reliABility: Part 2 procedure for failure mode and effects analysis (Fmea) (First Revision)	LITD 02
2	IS 15037:2020 IEC 61078 : 2016	Reliability Block Diagrams ( Second Revision )	LITD 02
3	IS 15038:2011 IEC 61164: 2004	Reliability growth - Statistical test and estimation methods (First Revision)	LITD 02
4	IS 8161 (Part 2):2018 IEC 60605-2 : 1994	Equipment reliability testing: Part 2 design of test cycles (First Revision)	LITD 02
5	IS 8161 (Part 4):2018 NULL	Equipment reliability testing: Part 4 statistical procedures for exponential distribution - Point estimates, confidence intervals, prediction intervals and tolerance intervals (First Revision)	LITD 02
6	IS 8161 (Part 5):2011 IEC 61123: 1991	Guide for equipment reliability testing: Part 5 compliance test plans for success ratio (First Revision)	LITD 02
7	IS 8161 (Part 6/Sec 2):1987	Guide for equipment reliABility testing: Part 6 tests for validity of a constant failure rate assumption: Sec 2 kolmogorov - Smirnov test	LITD 02
8	IS 8161 (Part 7):2012 IEC 61124: 2006	Guide for equipment reliABility testing: Part 7 compliance tests for constant failure rate and constant failure intensity (First Revision)	LITD 02
9	IS 9000 (Part 1):1988	Basic environmental testing procedures for electronic and electrical items: Part 1 general (First Revision)	LITD 01
10	IS 9000 (Part 10):1979	Basic environmental testing procedures for electronic and electrical items: Part 10 mould growth test	LITD 01
11	IS 9000 (Part 11):1983	Basic environmental testing procedures for electronic and electrical items: Part 11 salt mist test	LITD 01
12	IS 9000 (Part 12):1981	Basic environmental testing procedures for electronic and electrical items: Part 12 dust test	LITD 01
13	IS 9000 (Part 13):1981	Basic environmental testing procedures for electronic and electrical items: Part 13 low air pressure test	LITD 01
14	IS 9000 (Part 16):1983	Basic environmental testing procedures for electronic and electrical items: Part 16 driving rain test	LITD 01
15	IS 9000 (Part 17):1985	Basic environmental testing procedures for electronic and electrical items: Part 17 radiation test (First Revision)	LITD 01
16	IS 9000 (Part 20):1979	Basic environmental testing procedures for electronic and electrical items: Part 20 resistance to cleaning solvents and permanence of markings	LITD 01
17	IS 9000 (Part 21):1985	Basic environmental testing procedures for electronic & electrical items: Part 21 acoustics noise test	LITD 01
18	IS 9000 (Part 22):1983	Basic environmental testing procedures for electronic and electrical items: Part 22 fine mist test	LITD 01
19	IS 9000 (Part 23):1984	Basic environmental testing procedures for electronic and electrical items: Part 23 drip proof test	LITD 01
20	IS 9000 (Part 25):1980	Basic environmental testing procedures for electronic and electrical items: Part 25 hydrogen sulphide test for contacts and connections	LITD 03
21	IS 9000 (Part 26):1980	Basic environmental testing procedures for electronic & electrical items: Part 26 sulphur dioxide test for contacts and connections	LITD 03
22	IS 9000 (Part 27):1986	Basic environmental testing procedures for electronic and electrical items: Part 27 ultrasonic cleaning test	LITD 01
23	IS 9000 (Part 31):1978	Basic environmental testing procedures for electronic and electrical items: Part 31 combined cold/low air pressure tests	LITD 01
24	IS 9000 (Part 32):2006 IEC 60068-4: 1987	Basic environmental testing procedures for electronic and electrical items: Part 32 information for specification writers - Test summaries	LITD 01
25	IS 9000 (Part 4):2020 IEC 60068-2-78 : 2012	Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision )	LITD 01
26	IS 9000 (Part 6):1978	Basic environmental testing procedures for electronic and electrical items: Part 6 composite temperature/humidity cyclic test	LITD 01
27	IS 9000 (Part 7/Sec 1):2018 IEC 60068-2-27 : 2008	Basic environmental testing procedures for electronic and electrical items: Part 7 impact test: Sec 1 shock (Test Ea) (Second Revision)	LITD 01
28	IS 9000 (Part 7/Sec 6):1988	Basic environmental testing procedures for electronic and electrical items: Part 7 impact test: Sec 6 test ee: bounce	LITD 01
29	IS 9000 (Part 7/Sec 7):2020 IEC 60068-2-75 : 2014	Environmental Testing Part 7 Tests Section 7 Test Eh: Hammer tests ( First Revision )	LITD 01
30	IS 9000 (Part 8):1981	Basic environmental testing procedures for electronic and electrical items: Part 8 vibration (Sinusoidal) test	LITD 01
31	IS 9000 (Part 9):1984	Basic environmental testing procedures for electronic and electrical items: Part 9 acceleration (Steady State) test	LITD 01
32	IS 15474 (Part 3/Sec 7):2005 IEC 60300-3-7: 1999	DependABility management: Part 3 application guide: Sec 7 reliABility stress screening of electronic hardware	LITD 02
33	IS 9000 (Part 14/Sec 13):1988	Basic environmental testing procedures for electronic and electrical items:Part 14 test n:change of temperature (First Revision)	LITD 01
34	IS 9000 (Part 15/Sec 19):1982	Basic environmental testing procedures for electronic and electrical items: Part 15 sealing test	LITD 01
35	IS 9000 (Part 19/Sec 15):1986	Basic environmental testing procedures for electronic and electrical items: Part 19 test u: robustness of terminations and integral mounting devices (First Revision)	LITD 05
36	IS 9000 (Part 2/Sec 14):1977	Basic environmental testing procdures for electronic and electrical items: Part 2 cold test	LITD 01
37	IS 9000 (Part 3/Sec 15):1977	Basic environmental testing procedures for electronic and electrical items: Part 3 dry heat test	LITD 01
38	IS 9000 (Part 5/Sec 12):1981	Basic environmental testing procedures for electronic and electrical items: Part 5 damp heat (Cyclic) test	LITD 01
39	IS 9000 (Part 18/Sec 13):1981	Basic environmental testing procedures for electronic and electrical items: Part 18 solderABility test	LITD 05
40	IS 9000 (Part 7/Sec 15):1979	Basic environmental testing procedures for electronic and electrical items: Part 7 impact test	LITD 01

International Standards Referred In IS 15474 (Part 3/Sec 5):2018
IEC 60300-3-5 : 2001

1	IEC 60050 : 191 : 0 0
2	IEC 60300 : 2 : 0 0
3	IEC 60300 : 3 : 2
4	IEC 60300 : 3 : 4
5	IEC 61025 : 0 : 0 0
6	IEC 61070 : 0 : 0 0
7	IEC 61649 : 0 : 0 0
8	IEC 61650 : 0 : 0 0
9	IEC 61710 : 0 : 0 0
10	ISO 11453 : 0 : 0 0
11	ISO 3534 : 0 : 0 0

IS 15474 (Part 3/Sec 5):2018
IEC 60300-3-5 : 2001
is Referred in following Indian Standards :

1	IS/IEC 61124 : 2012	Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity	LITD 02
2	IS/IEC 60706 : Part 3 : 2006	Maintainability of Equipment Part 3 Verification and Collection, Analysis and Presentation of Data	LITD 02
3	IS 16333 : Part 3 : 2022	Mobile phone handsets: Part 3 indian language support for mobile phone handsets - Specific requirements(Second Revision)	LITD 13
4	IS 3400 : Part 5 : 2022	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 5 ADHESION OF RUBBERS TO TEXTILE FABRICS ( Fourth Revision )	PCD 29

Classification Details

Certification	:
Group	:	Management systems/services and corporate social responsibilities
Sub Group	:	Productivity
Sub Sub Group	:	Others Management and Productivity Standards
Aspect	:	Code of Practice

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 1

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details