Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 5382:2025
ISO 4633 : 2023

IS Title/आईएस शीर्षक : RUBBER SEALS JOINT RINGS FOR WATER SUPPLY DRAINAGE AND SEWERAGE PIPELINES SPECIFICATION FOR MATERIALS ( Third Revision )

Superseding IS/सुपरसीडिंग आईएस : IS 5382 : 2018

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : 3

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : PCD (Petroleum, Coal and Related Products Department)

Technical Committee/तकनीकी समिति : PCD 13 (Rubber And Rubber Products Sectional Committee)

Member Secretary/सदस्य सचिव : KREETI DAS (SCIENTIST-D)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 9

Click to download

License : 33

Click to view

Product Manual & SIT : 1

Click to download

Laboratory : 5

Click to view

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 5382:2025
ISO 4633 : 2023
:

1	IS 17618 (Part 6):2021	Methods of Test for Vulcanized Rubber Part 1 Tensile Stress-Strain Properties	PCD 29
2	IS/IEC 60512-2-6:2002 IEC 60512-2-6: 2002	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 2 HARDNESS BETWEEN 10 IRHD AND 100 IRHD ( Fifth Revision )	PCD 29
3	IS 3400 (Part 4):2012 ISO 188 : 2011	Methods of test for vulcanized rubber: Part 4 accelerated ageing and heat resistance (Third Revision)	PCD 29
4	IS 18898:2024 ISO 17369:2013	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 10 COMPRESSION SET SECTION 1 AT AMBIENT OR ELEVATED TEMPERATURES ( Third Revision )	PCD 29
5	IS/IEC/TR 60575:1977	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 10 COMPRESSION SET SECTION 2 AT LOW TEMPERATURES ( Third Revision )	PCD 29
6	IS 3400 (Part 20):2025 ISO 1431-1 : 2022	Methods of Test for Vulcanized Rubbers - Part 20 : Resistance to Ozone Cracking - Static Strain Test (Second Revision)	PCD 29
7	IS 3400 (Part 6):2018 ISO 1817 : 2015	Methods of Test for Vulcanized Rubbers Part 6 Determination of the Effect of Liquids (Fourth Revision)	PCD 29
8	IS 16752:2018 ISO 3302-1 : 2014	Rubber - Tolerances for products - Dimensional tolerances	PCD 29
9	IS 18499:2023 ISO 21766:2021	METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 28 DETERMINATION OF STRESS RELAXATION IN COMPRESSION ï¿½ TESTING AT CONSTANT TEMPERATURE ( First Revision )	PCD 29
10	IS 16751:2018 ISO 9691 : 1992	Rubber - Recommendations for the workmanship of pipe joint rings - Description and classification of imperfections	PCD 29
11	IS 17559 (Part 2):2021 ISO 6657 (Part-2) :	Rubber - General Procedures for Preparing and Conditioning Test Pieces for Physical Test Methods ( First Revision )	PCD 29

International Standards Referred In IS 5382:2025
ISO 4633 : 2023

1	ISO 3387 : 0 : 0 0
2	ISO 11346 : 0 : 0 0

IS 5382:2025
ISO 4633 : 2023
is Referred in following Indian Standards :

1	IS 13385 : 1992	Specification for Fire Extinguisher 50 Litre Capacity Wheel Mounted Water Type (gas Cartridge)	CED 22
2	IS 13386 : 1992	Specification for Fire Extinguisher 50 Litre Capacity , Mechanical Foam Type	CED 22
3	IS 10658 : 1999	Specification for Higher Capacity Dry Powder Fire Extinguisher (Trolley Mounted)	CED 22
4	IS 902 : 1992	Suction hose couplings for fire fighting purposes - Specification (Third Revision)	CED 22
5	IS 937 : 1981	Specification for Washers For Water Fittings For Fire Fighting Purposes (Second Revision)	CED 22
6	IS 5714 : 1981	Specification for hydrant stand - Pipe for fire fighting (First Revision)	CED 22
7	IS 11925 : 1986	Specification for pitch impregnated fibre pipes and fittings for drainage purposes	CED 24
8	IS 8419 : Part 2 : 1984	Requirements for rapid sand gravity filtration equipment: Part 2 underdrainage system	CED 24
9	IS 12709 : 1994	Glass-Fibre Reinforced Plastics (GRP) Pipes, Joints and Fittings for Use for Potable Water Supply - Specification (First Revision)	CED 50
10	IS 13916 : 1994	Installation of Glassfibre Reinforced Plastic (GRP) Piping System - Code Of Practice	CED 50
11	IS 14735 : 1999	Unplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System - Specification	CED 50
12	IS 15328 : 2003	Unplasticized Non-Pressure Polyvinyl Chloride (PVC-U) Pipes for Use in Underground Drainage and Sewerage Systems - Specification	CED 50
13	IS 16098 Part 1 : 2013	Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage - Specification: Part 1 Pipes and Fittings with Smooth External Surface, Type A	CED 50
14	IS 16098 Part 2 : 2013	Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage â€“ Specification: Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B	CED 50
15	IS 7634 : Part 2 : 2012	Plastics Pipes Selection, Handling, Storage and Installation for Potable Water Supplies - Code of Practice: Part 2 Laying and Jointing of Polyethylene (PE) Pipes (First Revision)	CED 50
16	IS 7634 : Part 3 : 2003	Plastics Pipe Selection, Handling, Storage and Installation for Potable Water Supplies - Code of Practice: Part 3 Laying and Jointing of UPVC Pipes (First Revision)	CED 50
17	SP 57 (QAWSM) : 1993	Handbook on pipes and fittings for drinking water supply	CED 50
18	IS 10292 : 1988	Specification for dimensional reooirements for rubber sealing rings for C.I.D joints in asbestos cement piping (First Revision)	MTD 06
19	IS 12820 : 2004	Dimensional requirements of rubber gaskets for mechanical joints and push - On joints for use with cast iron pipes and fittings for carrying water, gas and sewage (First Revision)	MTD 06
20	IS 12988 : 1991	Rubber sealing rings for cid joints for light duty ac pipesdimensional requirements	MTD 06
21	IS 13382 : 2018	Cast iron specials for mechanical and push-on flexible joints for pressure pipes for water, gas and sewage - Specification (Second Revision)	MTD 06
22	IS 8329 : 2000	Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)	MTD 06
23	IS 1592 : 2003	Asbestos cement pressure pipes and joints - Specification (Fourth Revision)	CED 53
24	IS 6530 : 1972	Code of practice for laying of asbestos cement pressure pipes	CED 53
25	IS 6908 : 1991	Asbestos - Cement pipes and fitkIngs for sewerage and drainage - Specification (First Revision)	CED 53
26	IS 9627 : 1980	Specification for asbestos cement pressure pipes (Light Duty)	CED 53
27	IS 9608 : 1985	Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size range above M40 up to and Including M120) (First Revision)	PGD 25
28	IS 14151 : Part 2 : 2008	Irrigation Equipment - Sprinkler Pipes - Specification : Part 2 Quick Coupled Polyethylene Pipes and Fittings (Second Revision)	FAD 17
29	IS 8150 : 1997	Shipbuilding - 45 Litre Capacity Chemical Foam Type Fire Engine, for Marine Use	TED 19
30	IS 16647 : 2017	Oriented Unplasticized Polyvinyl Chloride (PVC-O) Pipes for Water Supply - Specification	CED 50
31	IS 784 : 2019	Prestressed concrete pipes (Including Specials) - Specification (Third Revision)	CED 53
32	IS 14483 : Part 3 : 2018	Fertilizer and Chemical Injector System : Part 3 Fertilizer Tank - Specification	FAD 17
33	IS 17361 (Part 5) : 2020	Textile Machinery - Safety Requirements Part 5 Preparatory Machinery to Weaving and Knitting Amendment-1	TXD 14
34	IS 15155 : 2002	Bar/wire wrapped steel cylinder pipes with mortar lining and coating (Including Specials) - Specification	CED 53
35	IS 458 : 2003	Precast concrete pipes(With And Without Reinforcement) - Specification (Fourth Revision)	CED 53
36	IS 11722 : 1986	Specification for thin walled flexible quick coupling pipes	MTD 19
37	IS 4985 : 2000	Unplasticized pvc pipes for potable water supplies - Specification (Third Revision)	CED 50
38	IS 1536 : 2001	Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage - Specification (Fourth Revision)	MTD 06
39	IS 17881 : Part 2 : 2022	Protective clothing against heat and flame - Part 2 Skin burn injury prediction - Calculation requirements and test cases	TXD 32
40	IS 15905 : 2011	Hubless centrifugally cast (Spun) iron pipes, fittings and accessories - Spigot series - Specification	MTD 06
41	IS 8442 : 2008	Stand post type water and foam monitor for fire fighting - Specification (First Revision)	CED 22
42	IS 9198 : 1979	Specification for compaction rammer for soil testing	CED 43

Classification Details

Certification	:
Group	:	Rubber and Rubber Products
Sub Group	:	Other Rubber and Rubber Products
Sub Sub Group	:	O Rings and Seals
Aspect	:	Product Specification

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 9

License : 33

Product Manual & SIT : 1

Laboratory : 5

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details