Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
Total Standards : 57
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 |
IS/ISO/TR 14121-2 : 2012 |
Safety of machinery - Risk assessment Part 2 Practical guidance and examples of methods | 0 | ---- | Buy | |
| 2 |
IS 16806 (Part 1) : 2018 ISO 29042-1:2008 ISO 29042-1:2008 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 1 selection of test methods | 0 | ---- | Buy | |
| 3 |
IS 16806 (Part 9) : 2018 ISO 29042-9:2011 ISO 29042-9:2011 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 9 decontamination index | 0 | ---- | Buy | |
| 4 |
IS 16806 (Part 3) : 2018 ISO 29042-3:2009 ISO 29042-3:2009 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 3 test bench method for the measurement of the emission rate of a given pollutant | 0 | ---- | Buy | |
| 5 |
IS 16806 (Part 8) : 2018 ISO 29042-8:2011 ISO 29042-8:2011 |
Safety of Machinery - Evaluation of the Emission of Airborne Hazardous Substances Part 8 Room Method for the Measurement of the Pollutant Concentration Parameter | 0 | ---- | Buy | |
| 6 |
IS 16806 (Part 2) : 2018 ISO 29042-2:2009 ISO 29042-2:2009 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 2 tracer gas method for the measurement of the emission rate of a given pollutant | 0 | ---- | Buy | |
| 7 |
IS 16806 (Part 4) : 2018 ISO 29042-4:2009 ISO 29042-4:2009 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 4 tracer method for the measurement of the capture efficiency of an exhaust system | 0 | ---- | Buy | |
| 8 |
IS 16806 (Part 5) : 2018 ISO 29042-5:2010 ISO 29042-5:2010 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 5 test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet | 0 | ---- | Buy | |
| 9 |
IS 16806 (Part 6) : 2018 ISO 29042-6:2010 ISO 29042-6:2010 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 6 test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet | 0 | ---- | Buy | |
| 10 |
IS 16806 (Part 7) : 2018 ISO 29042-7:2010 ISO 29042-7:2010 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 7 test bench method for the measurement of the pollutant concentration parameter | 0 | ---- | Buy | |
| 11 |
IS 16807 : 2020 ISO 19353 : 2019 ISO 19353 : 2019 (First Revision) |
Safety of Machinery - Fire Prevention and Fire Protection (First Revision) | 0 | ---- | Buy | |
| 12 |
IS 16808 : 2018 ISO 14159:2002 ISO 14159:2002 |
Safety of machinery - Hygiene requirements for the design of machinery | 0 | ---- | Buy | |
| 13 |
IS 16809 (Part 3) : 2018 ISO 14122-3:2016 ISO 14122-3:2016 |
Safety of machinery - Permanent means of access to machinery: Part 3 stairs, stepladders and guard - Rails | 0 | ---- | Buy | |
| 14 |
IS 16809 (Part 1) : 2018 ISO 14122-1:2016 ISO 14122-1:2016 |
Safety of machinery - Permanent means of access to machinery: Part 1 choice of fixed means and general requirements of access | 0 | ---- | Buy | |
| 15 |
IS 16809 (Part 2) : 2018 ISO 14122-2:2016 ISO 14122-2:2016 |
Safety of machinery - Permanent means of access to machinery: Part 2 working platforms and walkways | 0 | ---- | Buy | |
| 16 |
IS 16809 (Part 4) : 2018 ISO 14122-4:2016 ISO 14122-4:2016 |
Safety of machinery - Permanent means of access to machinery: Part 4 fixed ladders | 0 | ---- | Buy | |
| 17 |
IS 16810 (Part 2) : 2018 ISO 13849-2:2012 ISO 13849-2:2012 |
Safety of machinery - Safety related parts of control systems: Part 2 validation | 0 | ---- | Buy | |
| 18 |
IS 16810 (Part 1) : 2018 ISO 13849-1:2015 ISO 13849-1:2015 |
Safety of machinery - Safety related parts of control systems: Part 1 general principles for design | 0 | ---- | Buy | |
| 19 |
IS 16811 : 2018 ISO 14120:2015 ISO 14120:2015 |
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards | 0 | ---- | Buy | |
| 20 |
IS 16812 : 2018 ISO 14119:2013 ISO 14119:2013 |
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection | 0 | ---- | Buy | |
| 21 |
IS 16813 : 2019 ISO 14118:2017 ISO 14118:2017 |
Safety of machinery - Prevention of unexpected start - Up | 0 | ---- | Buy | |
| 22 |
IS 16814 : 2021 IEC 60143-1:2015 (First Revision) |
SAFETY OF MACHINERY SAFETY DISTANCES TO PREVENT HAZARD ZONES BEING REACHED BY UPPER AND LOWER LIMBS | 0 | ---- | Buy | |
| 23 |
IS 16815 : 2019 ISO 13855:2010 ISO 13855:2010 |
Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body | 0 | ---- | Buy | |
| 24 |
IS 16816 : 2019 ISO 13854:2017 ISO 13854:2017 |
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body | 0 | ---- | Buy | |
| 25 |
IS 16817 : 2020 ISO 13851:2019 ISO 13851:2019 (First Revision) |
Safety of Machinery - Two-Hand Control Devices - Principles for Design and Selection (First Revision) | 0 | ---- | Buy | |
| 26 |
IS 16818 : 2018 ISO 13850:2015 ISO 13850:2015 |
Safety of machinery - Emergency stop function - Principles for design | 0 | ---- | Buy | |
| 27 |
IS 16819 : 2018 ISO 12100:2010 ISO 12100:2010 |
Safety of machinery - General principles for design - Risk assessment and risk reduction | 0 | ---- | Buy | |
| 28 |
IS 16834 (Part 1) : 2018 ISO 14123-1:2015 ISO 14123-1:2015 |
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery: Part 1 principles and specifications for machinery manufacturers | 0 | ---- | Buy | |
| 29 |
IS 16834 (Part 2) : 2018 ISO 14123-2:2015 ISO 14123-2:2015 |
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery: Part 2 methodology leading to verification procedures | 0 | ---- | Buy | |
| 30 |
IS 16835 (Part 3) : 2018 ISO 13856-3:2013 ISO 13856-3:2013 |
Safety of machinery - Pressure - Sensitive protective devices: Part 3 general principles for design and testing of pressure - Sensitive bumpers, plates, wires and similar devices | 0 | ---- | Buy | |
| 31 |
IS 16835 (Part 2) : 2018 ISO 13856-2:2013 ISO 13856-2:2013 |
Safety of machinery - Pressure - Sensitive protective devices: Part 2 general principles for design and testing of pressure - Sensitive edges and pressure - Sensitive bars | 0 | ---- | Buy | |
| 32 |
IS 16835 (Part 1) : 2018 ISO 13856-1:2013 ISO 13856-1:2013 |
Safety of machinery - Pressure - Sensitive protective devices: Part 1 general principles for design and testing of pressure - Sensitive mats and pressure - Sensitive floors | 0 | ---- | Buy | |
| 33 |
IS 16912 : 2018 ISO 21469:2006 ISO 21469:2006 |
Safety of machinery — Lubricants with incidental product contact — Hygiene requirements | 0 | ---- | Buy | |
| 34 |
IS 18966 : 2024 |
Safety of machinery - Rules for drafting and presentation of safety standards | 0 | ---- | Buy | |
| 35 |
IS 18982 : 2024 |
Safety of machinery - Evaluation of fault masking serial connection of interlocking devices associated with guards with potential free contacts | 0 | ---- | Buy | |
| 36 |
IS 18988 (Part 1) : 2024 |
Safety of machinery - Relationship with ISO 12100 Part 1 How ISO 12100 relates to type-B and type-C standards | 0 | ---- | Buy | |
| 37 |
IS 18988 (Part 4) : 2024 |
Safety of machinery - Relationship with ISO 12100 Part 4 Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects | 0 | ---- | Buy | |
| 38 |
IS 18988 (Part 5) : 2024 |
Safety of machinery - Relationship with ISO 12100 Part 5 Implications of artificial intelligence machine learning | 0 | ---- | Buy | |
| 39 |
IS 18988 (Part 3) : 2025 |
Safety of machinery - Relationship with ISO 12100 Part 3 Implementation of ergonomic principles in safety standards | 0 | ---- | Buy | |
| 40 |
IS 18989 : 2024 |
Safety of machinery - Instruction handbook - General drafting principles | 0 | ---- | Buy | |
| 41 |
IS 18990 : 2024 |
Safety of machinery - Safeguarding supportive system | 0 | ---- | Buy | |
| 42 |
IS 19544 (Part 1) : 2026 |
Acoustics — Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Pressure — Engineering Methods for Small Movable Sources in Reverberant Fields Part 1 Comparison Method for a Hard-Walled Test Room | 0 | ---- | Buy | |
| 43 |
IS 19544 (Part 2) : 2026 |
Acoustics — Determination of Sound Power Levels of Noise Sources Using Sound Pressure — Engineering Methods for Small, Movable Sources in Reverberant Fields Part 2 Methods for Special Reverberation Test Rooms | 0 | ---- | Buy | |
| 44 |
IS 19545 : 2026 |
Acoustics — Noise Emitted by Machinery and Equipment — Engineering Method for the Determination of Emission Sound Pressure Levels in Situ at the Work Station and at other Specified Positions using Sound Intensity | 0 | ---- | Buy | |
| 45 |
IS 19546 : 2026 |
Acoustics — Determination of Sound Power Levels and Sound Energy Levels of Noise Sources using Sound Pressure — Precision Methods for Reverberation Test Rooms | 0 | ---- | Buy | |
| 46 |
IS 19547 : 2026 |
Acoustics — Noise Emitted by Machinery and Equipment — Determination of Emission Sound Pressure Levels at a Work Station and at other Specified Positions Applying Accurate Environmental Corrections | 0 | ---- | Buy | |
| 47 |
IS 19548 : 2026 |
Acoustics — Noise Emitted by Machinery and Equipment — Determination of Emission Sound Pressure Levels at a Work Station and at other Specified Positions from the Sound Power Level | 0 | ---- | Buy | |
| 48 |
IS 19549 : 2026 |
Acoustics — Noise Emitted by Machinery and Equipment — Determination of Emission Sound Pressure Levels at a Work Station and at other Specified Positions in an Essentially Free Field over a Reflecting Plane with Negligible Environmental Corrections | 0 | ---- | Buy | |
| 49 |
IS 19550 : 2026 |
Acoustics — Noise Emitted by Machinery and Equipment — Guidelines for the use of Basic Standards for the Determination of Emission Sound Pressure Levels at a Work Station and at other Specified Positions | 0 | ---- | Buy | |
| 50 |
IS 19551 : 2026 |
Acoustics — Noise Emitted by Machinery and Equipment — Determination of Emission Sound Pressure Levels at a Work Station and at other Specified Positions Applying Approximate Environmental Corrections | 0 | ---- | Buy | |
| 51 |
IS 19552 : 2026 |
Acoustics — Determination of Sound Power Levels and Sound Energy Levels of Noise Sources using Sound Pressure — Engineering/Survey Methods for use in Situ in a Reverberant Environment | 0 | ---- | Buy | |
| 52 |
IS 19553 : 2026 |
Acoustics — Determination of Sound Power Levels and Sound Energy Levels of Noise Sources using Sound Pressure — Survey Method Using an Enveloping Measurement Surface over a Reflecting Plane | 0 | ---- | Buy | |
| 53 |
IS 19554 : 2026 |
Acoustics — Determination of Sound Power Levels and Sound Energy Levels of Noise Sources Using Sound Pressure — Precision Methods for Anechoic Rooms and Hemi-Anechoic Rooms | 0 | ---- | Buy | |
| 54 |
IS 19555 : 2026 |
Acoustics — Determination of Sound Power Levels and Sound Energy Levels of Noise Sources using Sound Pressure — Engineering Methods for an Essentially Free Field over a Reflecting Plane | 0 | ---- | Buy | |
| 55 |
IS/ISO/TS 19837 : 2018 |
Safety of machinery - Trapped key interlocking devices - Principles for design and selection | 0 | ---- | Buy | |
| 56 |
IS/ISO/TR 22100-2 : 2013 4046-3:2016 4046-3:2016 |
Safety of machinery Relationship with ISO 12100 Part 2: How ISO 12100 relates to ISO 13849-1 Adoption of ISOTR 22100-2 : 2013 | 0 | ---- | Buy | |
| 57 |
IS/ISO/TR 22100-3 : 2013 4046-4:2016 4046-4:2016 |
Safety of machinery Relationship with ISO 12100 Part 3: Implementation of ergonomic principles in safety standards Adoption of ISOTR 22100-3 : 2016 | 0 | ---- | Buy |