Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 4218 (Part 4):2001
ISO 262 : 1998

IS Title/आईएस शीर्षक : ISO general purpose metric screw threads: Part 4 selected sizes for screws, bolts and nuts (Second Revision) (Withdrawn)

Superseded by IS/प्रतिस्थापित आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : 2

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Others

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : PGD (Production and General Engineering Department)

Technical Committee/तकनीकी समिति : PGD 37 (General Engineering and Fasteners Standards Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. MONARCH JOSHI (SCIENTIST-C)

Other Details

Gazette Document : 2

Click to download

Classification details for: IS 4218 : Part 4 : 2001

Click to view

Cross Reference Details

Click to view

Cross Reference Details

Indian Standards Referred In IS IS 4218 (Part 4):2001
ISO 262 : 1998
:

1	IS/ISO 5408:2009 ISO 5408 : 2009	Screw threads - Vocabulary	PGD 37

International Standards Referred In IS 4218 (Part 4):2001
ISO 262 : 1998

1	ISO 262 : 1998
2	ISO 68 : 1 : 1998
3	ISO 261 : 1998

IS 4218 (Part 4):2001
ISO 262 : 1998
is Referred in following Indian Standards :

1	IS 902 : 1992	Suction hose couplings for fire fighting purposes - Specification (Third Revision)	CED 22
2	IS 778 : 1984	Specification for copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)	CED 03
3	IS 1703 : 2000	Water fittings - copper alloy float valves (horizontal plunger type) - Specification (fourth revision)	CED 03
4	IS 11931 : 1987	Specification for Sewer Cleaning Metal Rods	CED 24
5	IS 9798 : 2013	Low pressure regulators for use with liquefied petroleum gas (LPG) - Specification (Second Revision)	MED 16
6	IS 1361 : 1978	Specification for Steel Windows for Industrial Buildings	CED 11
7	IS 1038 : 1983	Specification For Steel Doors, Windows And Ventilators	CED 11
8	IS 12665 : Part 3 : 1989	Press Working Tools - Shanks:part 3 Shanks with Screwed Shaft	PGD 04
9	IS 2995 : 1988	Specification for set collars (First Revision)	PGD 35
10	IS 2670 : 1991	Thread milling cutter shell type specification (first revision)	PGD 32
11	IS 5702 : 1970	Specification for flat thread rolling dies	PGD 32
12	IS 6171 : 1992	Screwing taps - Technical supply conditions (Second Revision)	PGD 32
13	IS 6173 : Part 1 : 1992	Screwing taps -- Dimensions and tolerances on threaded portion: Part 1 For ISO metric screw threads (first revision)	PGD 32
14	IS 6175 : Part 1 : 1992	Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision)	PGD 32
15	IS 6175 : Part 2 : 1992	Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision)	PGD 32
16	IS 6175 : Part 3 : 1992	Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision)	PGD 32
17	IS 6175 : Part 4 : 1991	Screwing taps: Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification	PGD 32
18	IS 6175 : Part 5 : 1991	Screwing taps: Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification	PGD 32
19	IS 12321 : 1988	Specification for circular screwing dies for ISO metric threads	PGD 32
20	IS 12325 : 1988	Specification for circular screwing dies for ISO metric conduit pipe threads	PGD 32
21	IS 13114 : 1991	Forged brass gate, globe and check valves for water works purposes - Specification	CED 03
22	IS 10749 : 1983	Specification for swivel head nut for screw type mounts in pusher legs	PGD 08
23	IS 2692 : 1989	Ferrules for water services - specification (second revision)	CED 03
24	IS 4009 : Part 2 : 1981	Specification for grease nlpples: Part 2 conical head grease nipples (First Revision)	PGD 19
25	IS 9762 : 1994	Specification for polyethylene floats (Spherical) for float valves (first revision)	CED 03
26	IS 10131 : 1992	Link chain ends and chain bows for bucket elevators - Specification (First Revision)	MED 14
27	IS 2693 : 1989	Power transmissionbush type flexible coupling (Second Revision)	PGD 33
28	IS 7285 : Part 1 : 2018	Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision)	MED 16
29	IS 4786 : 2014	Variable high pressure regulators (VHPR) for use with liquefied petroleum gases - Specification (First Revision)	MED 16
30	IS 13065 : 1991	Bulk handling equipment - Wagon marshalling equipment - Endless rope type - General requirements	MED 07
31	IS 5740 : 1996	Household sewing machines - Memorandum on screw threads for sewing machine components (First Revision)	MED 29
32	IS 13219 : 1992	Rock bolts for mines (Cement Grouted) - General requirements	MED 08
33	IS 6680 : 1992	Railway carriagefans - Specification (First Revision)	ETD 32
34	IS 10238 : 2001	Fasteners - Threaded steel fasteners - Step bolts for steel structures - Specification (First Revision)	PGD 37
35	IS 10288 : 1982	Specification for belt - Fasteners, plate type	PGD 40
36	IS 12427 : 2001	Fasteners - Threaded steel fasteners - Hexagon head transmission tower bolts - Specification (First Revision)	PGD 37
37	IS 13096 : 2000	Fasteners - Hexagon nuts with specified proof load values - Fine pitch thread - Mechanical properties (First Revision)	PGD 37
38	IS 14394 : 1996	Industrial fasteners - Hexagon nuts of product grade C - Hot - Dip galvanized - Specification (Size Range M12 To M36)	PGD 37
39	IS 14962 : Part 2 : 2001	ISO general purpose metric screw threads - Tolerances: Part 2 limits of sizes for general purpose external and internal screw threads - Medium quality	PGD 37
40	IS 14962 : Part 5 : 2001	ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing	PGD 37
41	IS 15100 : 2018	Multi - Function valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision)	MED 16
42	IS 2585 : 2006	Square head bolts, screws and square nuts of product grade C - Specification (Second Revision)	PGD 37
43	IS 9705 : Part 1 : 1980	Specification for quick release coupling for vacuum pipe lines: Part 1 screwed couplings type b	MED 17
44	IS 3524 : Part 1 : 1982	Specification for threaded taper pins: Part 1 with internal threads (First Revision)	PGD 37
45	IS 3726 : 2003	Thumb screws - Specification (Second Revision)	PGD 37
46	IS 13432 : Part 1 : 1992	Gas leak detector for use with low pressure liquefied petroleum gas burning appliances : Part 1 mechanical type	MED 23
47	IS 14612 : 1999	Commercial burners using LPG at inlet pressure up to 147.1 kN/m2 (1 500 gf/cm2) - Specification	MED 23
48	IS 7795 : 2004	Hexagon nuts with collar - Specification (First Revision)	PGD 37
49	IS 9965 : 1981	Limits of sizes for ISO metric external screw threads for high temperature applications	PGD 37
50	IS 11164 : 1992	Photography - Front Lens Barrels Up To 127 Mm Dimensions Important To The Connection Of Auxiliaries	MED 32
51	IS 13902 : Part 3 : 1993	Sockets for wire ropes for general purposes: Part 3 special requirements for sockets produced by casting	MED 10
52	IS 15137 : 2002	Metal connecting lugs for porcelain transformer bushings - Specification	ETD 06
53	IS 3347 : Part 8 : Sec 2 : 1992	Dimensions for porcelain transformer bushings for use in lightly polluted atmospheres: Part 8 : 52 kV bushings: Sec 2 metal parts	ETD 06
54	IS 4318 : 1993	Solid core porcelain insulators for overhead traction lines - Specification (First Revision)	ETD 06
55	IS 7624 : 1990	Lead - Acid starter batteries for diesel - locomotives and rail cars - Specification (First Revision)	ETD 11
56	IS 10685 : 1983	Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range Above M120 up to and including M200)	PGD 25
57	IS 6137 : 1983	Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision)	PGD 25
58	IS 6244 : 1980	Specification for gauging members for plain plug gauges go and no go members (Size Range Above 40 To 120 mm) (First Revision)	PGD 25
59	IS 7018 : Part 2 : 1983	Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision)	PGD 25
60	IS 2254 : 1985	Dimensions of vertical shaft motors for pumps (Second Revision)	ETD 15
61	IS 10433 : Part 2 : 2002	Male stud tee body (Stud Run) for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision)	PGD 36
62	IS/IEC 60079 : PART 0 : 2017	Explosive Atmospheres Part 0 Equipment — General Requirements ( Third Revision )	ETD 22
63	IS/IEC 61241 : PART 0 : 2004	Electrical apoparatus for use in the presence of compustible dust : Part 0 General requirements	ETD 22
64	SP 42 : 2008	Survey of screw threads (First Revision)	PGD 37
65	IS 6623 : 2004	High Strength Structural Nuts	PGD 37
66	IS 12943 : 1990	Brass glands for PVC cables - Specification	ETD 09
67	IS 3175 : 2013	Internal combustion engine - Sealing washers for pipe unions - Specification (Second Revision)	TED 02
68	IS 1063 : 1997	Automotive vehicles - Ml4 x 1.25 spark plugs with flat seating and their cylinder head housing - Specification (Second Revision)	TED 11
69	IS 6148 : 1971	Specification for head fittings and round nuts used with ships blocks	TED 17
70	IS 6176 : 1971	Steel Ladders for Ship's Use	TED 17
71	IS 3323 : 1980	Specification for bi-pin landholders for tubular fluorescent lamps (First Revision)	ETD 14
72	IS 1367 : Part 3 : 2017	Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)	PGD 37
73	IS 616 : 2017	Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)	LITD 07
74	IS 9388 : Part 2 : 2019	Equal elbow body for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision)	PGD 36
75	IS 9388 : Part 1 : 1979	Specification for equal elbow body for oil - Hydraulic couplings: Part 1 made from forgings	PGD 36
76	IS 9389 : Part 1 : 2018	Specification for - Equal tee - Body for oil - Hydraulic couplins: Part 1 tee body made from forgings	PGD 36
77	IS 9390 : 2018	Specification for straight coupling body for oil - Hydraulic couplings	PGD 36
78	IS 9389 : Part 2 : 2018	Specification for equal tee body for oil - Hydraulic couplings: Part 2 made from bar stock	PGD 36
79	IS 1367 : Part 14 : Sec 3 : 2018	Technical supply conditions for threaded steel fasteners: Part 14 mechanical properties of corrosion - Resistant stainless steel fasteners section 3 set screws and similar fasteners not under tensile stress (Fourth Revision	PGD 37
80	IS 9387 : Part 1 : 2018	Specification for taper male stud elbow body for oil - Hydraulic c0upling: Part 1 made from forgings zyxw	PGD 36
81	IS 9387 : Part 2 : 2018	Specification for taper male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock	PGD 36
82	IS 9229 : 1979	Specification for inductors for electromagnetic interference suppression	LITD 24
83	IS 6297 : Part 1 : 1971	Specification for transformers and inductors (Power, Audio, Pulse And Switching) for electronic equipment: Part 1 general requirements and tests	LITD 24
84	IS 16280 : 2014	Unreduced pressure adaptors for use with liquefied petroleum gas (LPG) - Specification	MED 16
85	IS 15657 : 2006	Centrifugal pumps for petroleum, petrochemical and natural gas industries	MED 20
86	IS 13252 : Part 1 : 2010	Information Technology Equipment - Safety Part 1: General Requirements (Second Revision)	LITD 07
87	IS 5624 : 1993	Foundation bolts - Specification (First Revision)	PGD 37
88	IS/ISO 12812 : Part 1 : 2017	Core banking- Mobile financial services- Part 1: General framework	SSD 03
89	IS 13252 : Part 1 : 2010	Information Technology Equipment - Safety Part 1: General Requirements (Second Revision)	LITD 07
90	IS 11563 : 1986	Technical supply conditions for dynamic compressors	MED 22
91	IS 778 : 1984	Specification for copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)	CED 03
92	IS 11228 : 1985	Recommendations for design of screw hoists for hydraulic gates	WRD 12
93	IS 2699 : 1982	Specification for flats and flats' screws (first revision)	TXD 14
94	IS 2531 : 1979	Specification for crank shaft for cotton looms (first revision)	TXD 14
95	IS 835 : 1978	Specification for bottom shaft for cotton looms (first revision)	TXD 14
96	IS 10786 : 1984	Mirror, Rhinoscopic, ST. Clair Thomson's Pattern	MHD 04
97	IS 3279 : 1966	General requirements for mushroom ventiliators	TED 17

Classification Details

Certification	:
Group	:	Building Materials including Paints
Sub Group	:	Fasteners and hardware
Sub Sub Group	:	Buliding hardware
Aspect	:	Others

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Gazette Document : 2

Classification details for: IS 4218 : Part 4 : 2001

Cross Reference Details

Cross Reference Details

Classification Details