Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 15475 (Part 3):2022

IS Title/आईएस शीर्षक : CODE OF RECOMMENDED PRACTICE FOR AMUSEMENT RIDES SAFETY PART 3 DESIGN MANUFACTURE AND ERECTION

Superseding IS/सुपरसीडिंग आईएस : IS 15475 : Part 3 : 2004

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 1

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Code of Practice

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : MED (Mechanical Engineering Department)

Technical Committee/तकनीकी समिति : MED 06 (Continuous Bulk Conveying, Elevating, Hoisting Aerial Ropeways And Related Equipment Sectional Committee)

Member Secretary/सदस्य सचिव : Mr. AMAN DHANAWAT (SCIENTIST-C)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 4

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 15475 (Part 3):2022
:

1	SP 30:2023	National electrical code 2011 (First Revision)	ETD 20
2	IS 210:2009	Grey iron castings - Specification (Fifth Revision)	MTD 06
3	IS 399:1963	Classification of Commercial Timbers and their Zonal Distribution (Revised)	CED 09
4	IS 456:2000	Plain and reinforced concrete - Code of practice (Fourth Revision)	CED 02
5	IS 732:2019	Code of practice for electrical wiring installations (Fourth Revision)	ETD 20
6	IS 734:1975	Specification for wrought aluminium and aluminium alloy forging stock and forgings (For General Engineering Purposes) (Second Revision)	MTD 07
7	IS 755:2023	Specification for handloom cotton MALMAL (first revision)	TXD 08
8	IS 800:2007	General construction in steel - Code of practice (Third Revision)	CED 07
9	IS 802 (Part 1/Sec 1):2015	Use of structural steel in overhead transmission line towers - Code of practice: Part 1 materials, loads and design strengths: sec 1 materials and loads (Fourth Revision)	CED 07
10	IS 802 (Part 1/Sec 2):2016	Use of Structural Steel in Overhead Transmission Line Towers - Code of Practice: Part 1 Material, Loads and Design Strengths: Sec 2 Design Strengths (Fourth Revision)	CED 07
11	IS 875 (Part 3):2015	Design Loads (Other than Earthquake) for Buildings and Structures - Code of Practice Part 3 Wind Loads ( Third Revision )	CED 37
12	IS 883:2016	Design of Structural Timber in Buildings - Code of Practice (Fifth Revision)	CED 13
13	IS 947:1985 Reviewed In : 2017 Reaffirmed but not taken up for revision	Specification for washers for water fittings for fire fighting purposes (Second Reuision)	CED 22
14	IS 1030:1998	Carbon steel castings for general engineering purposes - Specification (Fifth Revision)	MTD 14
15	IS 1285:2023	Wrought aluminium and aluminium alloys - Extruded round tube and hollow sections for general engineering purposes - Specification (Third Revision)	MTD 07
16	IS 1293:2019 IEC 60884-1	Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Third Revision)	ETD 14
17	IS 1364 (Part 1):2023 ISO 4014 : 2022	Hexagon head bolts, screws and nuts of product grades A and B: Part 1 hexagon head bolts (Size Range M 1.6 To M 64) (Fifth Revision)	PGD 37
18	IS 1364 (Part 2):2023 ISO 4017 : 2022	Hexagon head bolts, screws and nuts of product grades A and B: Part 2 hexagon head screws (Size Range M 1.6 To M 64) (Fifth Revision)	PGD 37
19	IS 1364 (Part 3):2026	Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 )	PGD 37
20	IS 1364 (Part 4):2025 ISO 4035 : 2023	Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision)	PGD 37
21	IS 1364 (Part 5):2002 ISO 4036	Hexagon head bolts, screws and nuts of product grades A and B: Part 5 hexagon thin nuts - Product grade B (Unchamfered) (Size Range M 1.6t0 M 10) (Fourth Revision)	PGD 37
22	IS 1364 (Part 6):2025 ISO 4033 : 2023	Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 6 Hexagon Nuts, Style 2 ( First Revision )	PGD 37
23	IS 1368:2018 ISO 4753 : 2011	Dimensions for ends of parts with external ISO metric threads (Fourth Revision)	PGD 37
24	IS 1641:2013	Fire safety of buildings (General): general principles of fire grading and classification - Code of practice (Second Revision)	CED 36
25	IS 1642:2013	Fire safety of buildings (General): details of construction - Code of practice (Second Revision)	CED 36
26	IS 1643:2013	Fire Safety of Buildings (General): Exposure Hazard - Code of Practice (Second Revision)	CED 36
27	IS 1644:2013	Fire safety of buildings (General): exit requirements and personal hazard - Code of practice (Second Revision)	CED 36
28	IS 1646:2015	Fire safety of buildings (General): electrical installations - Code of practice (Third Revision)	CED 36
29	IS/ISO 1834:1999	Short link chain for lifting purposes - General conditions of acceptance	MED 14
30	IS/IEC 60068-2-14:2023 IEC 60068-2-14:2023	CONVEYOR AND ELEVATOR TEXTILE BELTING – SPECIFICATION PART 1 GENERAL PURPOSE BELTING (Fifth Revision)	PGD 40
31	IS 1891 (Part 2):2025	Conveyor and elevator textile belting - Specificaton: Part 2 heat resistant belting (Third Revision)	PGD 40
32	IS 1891 (Part 3):1988	Specification for rubber conveyor and elevator textile belting: Part 3 oil resistant belting (Second Revision)	PGD 40
33	IS 1891 (Part 4):2024	Specification for rubber conveyor and elevator belting: Part 4 hygienic belting (First Revision)	PGD 40
34	IS 1891 (Part 5):1993	Conveyor and elevator textile belting - Specification: Part 5 fire resistant belting for surface application	PGD 40
35	IS 1893 (Part 4):2024	Criteria for Earthquake Resistant Design of Structures Part 4 Industrial Structures Including Stack - Like Structures ( First Revision )	CED 39
36	IS 2004:1991	Carbon steel forgings for general engineering purposes - Specification (Third Revision)	MTD 16
37	IS 2026 (Part 1):2011	Power transformers: Part 1 general (Second Revision)	ETD 16
38	IS 2062 (Part 1):2025	Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)	MTD 04
39	IS 2266:2024	Steel wire ropes for general engineering purpose - Specification (Fifth Revision)	MED 10
40	IS 2361:2002	Bulldog grips - Specification (Third Revision)	MED 10
41	IS 19404:2025	Forged shackles for general lifting purposes - Dee shackles and bow shackles	MED 14
42	IS 2429 (Part 1):1987	Specification for round steel short link chains (Electric Butt Welded), grade L(3): Part 1 Non - Calibrated load chain for lifting purposes (Third Revision)	MED 14
43	IS 18375 (Part 1):2023	SPECIFICATION FOR DROP FORGED SOCKETS FOR WIRE ROPES FOR GENERAL ENGINEERING PURPOSES Second Revision	MED 10
44	IS 2535 (Part 1):2004 ISO 53	Cylindrical gears for general and heavy engineering: Part 1 standard basic rack tooth profile (Third Revision)	PGD 33
45	IS 2535 (Part 2):2004 ISO 54	Cylindrical gears for general and heavy engineering: Part 2 module (Third Revision)	PGD 33
46	IS 2644:1994	High strength steel castings for general engineering and structural purposes - Specification (Fourth Revision)	MTD 14
47	IS 2760:2025	Specification for steel chain slings (First Revision)	MED 14
48	IS 2762:2009	Wire rope slings and sling legs - Specification (Second Revision)	MED 10
49	IS 2828:2019 ISO 472 : 2013	Plastics - Vocabulary (Second Revision)	PCD 12
50	IS 3043:2018	Code of practice for earthing (Second Revision)	ETD 20
51	IS/ISO 3076:2012 ISO 3076 : 2012	Round steel short link chains for general lifting purposes - Medium tolerance sling chains for chain slings - Grade 8 (First Revision)	MED 14
52	IS/ISO 3077:2001	SHORT LINK CHAIN FOR LIFTING PURPOSES GRADE T (TYPES T, OAT AND DT), FINE-TOLERANCE HOIST CHAIN	MED 14
53	IS 3109 (Part 1):2024	Specification for short link chain, grade M (4): Part 1 non - Calibrated load chain for lifting purposes (Second Revision)	MED 14
54	IS 3629:1986	Structural Timber In Building - Specification (First Revision)	CED 13
55	IS 3734:1983 Reaffirmed but not taken up for revision	Dimensions for worm gearing (First Revision)	PGD 33
56	IS 3757:1985	Specification for high strength structural bolts (Second Revision)	PGD 37
57	IS 3809:1979	Fire resistance test for structures (First Revision)	CED 36
58	IS 3854:2023	Switches for domestic and similar purposes - Specification (Second Revision)	ETD 14
59	IS 3871:2013 ISO 1968 : 2004	Fibre ropes and cordage – Vocabulary (third revision)	TXD 09
60	IS 4889:1968 IEC 2 D	Methods of determination of efficiency of rotating electrical machines	ETD 15
61	IS 4912:2024	Safety requirements floor and wall openings, and toe boards (First Revision)	CED 45
62	IS 5037 (Part 1):2004 ISO 677	Straight bevel gears for general engineering and heavy engineering: Part 1 basic rack (First Revision)	PGD 33
63	IS 5037 (Part 2):2004 ISO 678	Straight bevel gears for general engineering and heavy engineering: Part 2 module and diametral pitches (First Revision)	PGD 33
64	IS 5175:2022 ISO 1346:2021	Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high- tenacity multifilament (PP3) – 3-, 4-, 8- and 12-strand ropes (third revision)	TXD 09
65	IS 5384:1985	Specification for Aluminium I-Beam (First Revision)	CED 07
66	IS/IEC 61936-2:2023	WIRE REINFORCED RUBBER COVERED HYDRAULIC HOSE SPECIFICATION Third Revision of IS 7651	PCD 13
67	IS 8147:1976	Code of practice for use of aluminium alloys in structures	CED 07
68	IS 8526:1994 ISO 7180	Sizes for bores and port threads for pneumatic fluid power cylinders - Recommendations (First Revision)	PGD 36
69	IS 18267:2024	Wire Ropes and Strands for Suspension Bridges - Specification (Second Revision)	MED 10
70	IS 9833:2018	List of colourants for use in plastics in contact with foodstuffs and pharmaceuticals (Second Revision)	PCD 12
71	IS 9936:2023	Manila, nylon, polyester and polypropylene ropes for marine purpose – Guide on equivalence (first revision)	TXD 09
72	IS 10000 (Part 1):1980	Methods of tests for internal combustion engines: Part 1 glossary of terms relating to test methods	TED 02
73	IS 10000 (Part 2):1980	Methods of tests for internal combustion engines Part 2 standar d reference conditions	TED 02
74	IS 10000 (Part 3):1980	Methods of tests for internal combustion engines: Part 3 measurements for testing - Units and limits of accuracy	TED 02
75	IS 10000 (Part 4):1980	Methods of tests for internal combustion engines: Part 4 declaration of power, efficiency, fuel consumption and lubricating oil consumption	TED 02
76	IS 10000 (Part 5):1980	Methods of tests for internal combustion engines: Part 5 preparation for tests and measurements for wear	TED 02
77	IS 10000 (Part 6):1980	Methods of tests for internal combustion engines: Part 6 recording of test results	TED 02
78	IS 10000 (Part 7):1980	Methods of tests for internal combustion, engines: Part 7 governing tests for constant speed engines and selection of engines for use with electrical generators	TED 02
79	IS 10000 (Part 8):1980	Methods of tests for internal combustion engines Part 8 performance tests	TED 02
80	IS 10000 (Part 9):1980	Methods of tests for internal combustion engines: Part 9 endurance tests	TED 02
81	IS 10000 (Part 10):1980	Methods of tests for internal combustion engines: Part 10 tests for smoke levels, limits and corrections for smoke levels for variable ,speed compression ignition engines	TED 02
82	IS 10000 (Part 11):1980	Methqds of tests for internal combustion engines: Part 11 information to be supplied by the purchaser to the manufacturer and information to be supplied by the manufacturer along with the engine	TED 02
83	IS 10000 (Part 12):1980	Methods of tests for internal combustion engines: Part 12 specimen test certificates	TED 02
84	IS 10000 (Part 13):2002	Methods of tests for internal combustion engines: Part 13 recommendations on nature of tests required for functional changes in critical components	TED 02
85	IS 10143:1995 ISO 6431	Pneumatic fluid power - Single rod cylinders, 1000 kPa (10 Bmar) series, with detachable mountings, bores from 32 mm to 320 mm - Mounting dimensions (First Revision)	PGD 36
86	IS 11277:2004 ISO 5596	Hydraulic fluid power - Gas - Loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities (First Revision)	PGD 36
87	IS 11066:2022 ISO 1141:2021	Fibre ropes ¬– Polyester 3-, 4-, 8- and 12- strand ropes (second revision)	TXD 09
88	IS 12723:2020 ISO 6432 : 2015	Pneumatic Fluid Power - Single Rod Cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm - Basic and Mounting Dimensions ( First Revision )	PGD 36
89	IS/ISO 10451:2010 ISO 10451:2010	Pneumatic Fluid Power - General Rules and Safety Requirements for Systems and their Components ( Second Revision )	PGD 36
90	IS 12738:1995 ISO 6430	Pneumatic fluid power 7 single rod cylinders, 1 000 kPa (Ib 10 bar) Series, With Integral Mountings, Bores From 32 Mm To 250 Mm - Mounting Dimensions (First Revision)	PGD 36
91	IS 16323:2017 ISO 25862:2009	Pneumatic Fluid Power - Cylinders, 1 000 kPa ( 10 bar ) Series - Mounting Dimensions of Rod-end Spherical Eyes ( Second Revision )	PGD 36
92	IS/ISO 21549-3:2014 ISO 21549-3:2014	Pneumatic Fluid Power - Cylinders, 1 000 kpa ( 10 bar ) Series - Mounting Dimensions of Rod-end Clevises ( Second Revision )	PGD 36
93	IS 13980:2025	ACCEPTANCE TESTS ON INDUSTRIAL BOILERS CODE OF PRACTICE	MED 01
94	IS 14534:2023	Plastics - Guidelines for the recovery and recycling of plastics waste (First Revision)	PCD 12
95	IS 15475 (Part 1):2022	Code of recommended practice for amusement rides safety: Part 1 general information	MED 06
96	IS/IEC 61558-1:2017 61558-1	Safety of power transformers, power supply units and similar: Part 1 general requirements and tests	ETD 16
97	IS 62305 (Part 1):2010	Protection against lightning: Part 1 general principles	ETD 20
98	IS/IEC 62305-2:2010	Protection against lightning: Part 2 risk management	ETD 20
99	IS/IEC 62305-3:2010 IEC 62305-3	Protection against lightning: Part 3 physical damage to structures and life hazard	ETD 20
100	IS/IEC 62305-4:2010	Protection against lightning: Part 4 electrical and electronic systems within stuctures	ETD 20

International Standards Referred In IS 15475 (Part 3):2022

1	ISO 683 : 1 : 2016
2	ISO 1204 : 1990
3	ISO 3046 : 1 : 2002

IS 15475 (Part 3):2022
is Referred in following Indian Standards :

1	IS 15475 : Part 2 : 2004	Code of recommended practice for amusement rides safety: Part 2 safety requirements	MED 06

Classification Details

Certification	:
Group	:	Textile, Textile Products and Machinery
Sub Group	:	Textile dyes and auxiliaries
Sub Sub Group	:	Physical methods of tests for textile fabric
Aspect	:	Methods of tests

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 4

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details