Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 12360:1988
IEC 60038

IS Title/आईएस शीर्षक : Voltage bands for electrical installations including preferred voltages and frequency (Withdrawn)

Superseded by IS/प्रतिस्थापित आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Identical under dual numbering

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : 4

Aspect/पक्ष : Terminology

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : ETD (Electrotechnical Department)

Technical Committee/तकनीकी समिति : ETD 01 (Basic Electrotechnical Standards Sectional Committee)

Member Secretary/सदस्य सचिव : EMMANUEL ABHISHEK MURMU (SCIENTIST-D)

Other Details

Gazette Document : 0

Classification details for: IS 12360 : 1988

Click to view

Cross Reference Details

Click to view

Cross Reference Details

Indian Standards Referred In IS IS 12360:1988
IEC 60038
:

Standard contains no Cross Referenced Indian Standard.

International Standards Referred In IS 12360:1988
IEC 60038

Standard contains no Cross Referenced International Standard.

IS 12360:1988
IEC 60038
is Referred in following Indian Standards :

1	IS 5309 : 2001	Poultry Farming Equipment — Brooders — Specification (Second Revision)	FAD 32
2	IS 2370 : 2014	Walk - In cold rooms - Specification (First Revision)	MED 03
3	IS 13314 : 1992	Solid state inverters run from storage batteries - Specification	ETD 31
4	IS/IEC60044 : Part 1 : 2003	Instrument Transformers Part 1 Current Transformers	ETD 34
5	IS 12640 : Part 2 : 2016	Residual current operated circuit - Breakers with integral overcurrent protection for household and similar uses (Rcbos): Part 2 general rules	ETD 07
6	IS/IEC 60898 : PART 1 : 2015	Electrical accessories - Circuit - Breakers for overcurrent protection for household and similar installations: Part 1 circuit - Breakers for a.c. operation (First Revision)	ETD 07
7	IS 14665 : Part 3 : Sec 1 and 2 : 2000	Electric traction: Part 3 safety rules lifts: Sec 1 passenger and goods lifts: Sec 2 service lifts	ETD 25
8	IS 13010 : 2002	AC watthour meters, class 0.5, 1 and 2 - Specification (First Revision)	ETD 13
9	IS 14415 : 1997	Volt - Ampere hour meters for restricted power factor range - Specificaiton	ETD 13
10	IS 14451 : Part 2 : 1999	Telemetering for consumption and demands: Part 2 direct digital transfer of meter values	ETD 13
11	IS 14377 : 1996	Specification for three - Phase induction motors for fans used in air - Conditioning and ventilation	ETD 15
12	IS 5422 : 1996	Turbine type generators - Specification (First Revision)	ETD 15
13	IS 7538 : 1996	Three - Phase squirrel cage induction motors for centrifugal pumps for agricultural application - Specification (First Revision)	ETD 15
14	IS/IEC 60034 : PART 1 : 2004	Rotating electrical machines : Part 1 Rating and performance	ETD 15
15	IS/IEC 61058 : PART 1 : 2000	Switches for appliances: Part 1 general requirements	ETD 14
16	IS 8447 : 1989	Manually operated voltage regulators for domestic use - Specification (First Revision)	ETD 16
17	IS/IEC 61558 : PART 2 : SEC 7 : 2007	Safety of power transformers, power supplies reactors and similar products: Part 2 - 7 particular requirements and tests for transformers and power supplies for toys	ETD 16
18	IS 13340 : 1993	Power capacitors of self-Healing type for AC power systems having rated voltage up to 650 V - Specification	ETD 29
19	IS 7567 : 1993	Automatic circuit reclosers	ETD 08
20	IS 13234 Part 0 : 2017	Short - Circuit currents in three - Phase A.C. systems: Part 0 calculation of currents (First Revision)	ETD 20
21	IS 1401 : 2008	Protection of persons and equipment by enclosures - Probes for verification (Second Revision)	ETD 32
22	IS/IEC 60730 : PART 1 : 1999	Automatic electrical controls for household and similar use : part 1 General Requirements	ETD 32
23	IS 10804 : Part 2 : 2018	Recommended pumping systems for agricultural purposes: Part 2 submersible pump sets (Third Revision)	MED 20
24	IS 15596 (Part 7) : 2016	Sound System Equipment Part 7: Headphones and Earphones (First Revision)	LITD 07
25	IS 8148 : 2018	Ducted and package air - Conditioners - Specification (Second Revision)	MED 03
26	IS 732 : 2019	Code of practice for electrical wiring installations (Fourth Revision)	ETD 20
27	IS/IEC 62314 : 2006	Solid - State relays	ETD 35
28	IS 17064 : Part 1 : 2018	Electromechanical elementary relays: Part 1 general and safety requirements	ETD 35
29	IS 17017 : Part 1 : 2018	Electric Vehicle Conductive Charging System Part 1 General Requirements	ETD 51
30	IS 17017 : Part 21 : Sec 1 : 2019	Electric Vehicle Conductive Charging System Part 21 Electromagnetic Compatibility ( EMC ) Requirements Section 1 On-board chargers	ETD 51
31	IS 17017 : Part 21 : Sec 2 : 2019	Electric Vehicle Conductive Charging System Part 21 Electromagnetic Compatibility ( EMC ) Requirements Section 2 Off-board chargers	ETD 51
32	IS/IEC 61800 : Part 2 : 2015	Adjustable Speed Electrical Power Drive Systems Part 2 General Requirements â€” Rating Specifications for Low Voltage Adjustable Speed a.c. Power Drive Systems	ETD 31
33	IS/IEC 61204 : 2001	Low-Voltage Power Supply Devices DC Output â€” Performance Characteristics	ETD 31
34	IS 17361 (Part 6) : 2020	Textile machinery – Safety requirements Part 6 Fabric manufacturing machinery Amendment - 1	TXD 14
35	IS 17017 : Part 2 : Sec 2 : 2020	Electric Vehicle Conductive Charging System Part 2 Plugs, Socket - Outlets, Vehicle Connectors and Vehicle Inlets Section 2 Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories	ETD 51
36	IS 17036 : 2018	Distribution System Supply Voltage Quality	ETD 01
37	IS 17017 (Part 2/Sec 1) : 2020	Electric Vehicle Conductive Charging System Part 2 Plugs, Socket-Outlets, Vehicle Connectors, and Vehicle Inlets Section 1 General requirements	ETD 51
38	IS 17345 : Part 1 : 2020	Power Track System Part 1 General Requirement	ETD 14
39	IS 17017 : Part 2 : Sec 3 : 2020	Electric Vehicle Conductive Charging System Part 2 Plugs, Socket - Outlets, Vehicle Connectors and Vehicle Inlets Section 3 Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers	ETD 51
40	IS 13779 : 1999	AC static watihour meters, class 1 and 2 - Specification (First Revision)	ETD 13
41	IS 14486 : 1997	General purpose dot matrix printer - Specificaiton	LITD 36
42	IS 14697 : 1999	AC static transformer operated , watthour and var - Hour meters, class 0.2 S and 0.5 S - Specification	ETD 13
43	IS 14582 : 1998	Single phase small AC electric motors for centrifugal pumps for agricultural applications - Specification	ETD 15
44	IS 4105 : 1988	Styrene (Vinyl Benzene)	PCD 09
45	IS 15999 : Part 1 : 2016	Rotating Electrical Machines Part 1 Rating and Performance (First Revision)	ETD 15
46	IS/IEC 62341 : Part 5 : 2009	Organic Light Emitting Diode OLED displays- Part 5: Environmental testing methods	LITD 04
47	IS/IEC 60071 : Part 1 : 2006	Insulation co - Ordination: Part 1 definitions, principles and rules	ETD 19
48	IS 7776 : 2021	Textiles - Silk webbing - Specification (first revision)	TXD 39
49	IS 13360 : Part 8 : Sec 13 : 2021	Plastics Methods Of Testing Part 8 Permanence chemical Properties Section 13 Determination of Changes in Colour and Variations in Properties After Exposure to Daylight Under Glass Natural Weathering or Laboratory Light Sources First Revision of IS 1	PCD 27
50	IS/IEC 61076 : Part 4 : Sec 100 : 2001	Connectors for electronic equipment Part 4-100: Printed board connectors with assessed quality Detail specification for two-part connector modules having a grid of 2.5 mm for printed boards and backplanes	LITD 03
51	IS/IEC 61557 : Part 1 : 2007	Electrical safety in low voltage distribution systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures: Part 1 general requirements	ETD 12
52	IS 12249 : 2021	Specification for Desiccant Driers	MED 03
53	IS 5339 : 2021	Skin Powder for Infants	PCD 19
54	IS/ISO 3826 : Part 1 : 2019	Plastics collapsible containers for human blood and blood components Part 1 Conventional containers First Revision	MHD 12
55	IS 16249 (Part 1) : 2021	Gas Analysis Preparation of Calibration Gas Mixtures Using Dynamic Methods Part 1 General Aspects	CHD 06
56	IS 15572 : 2015	Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability (First Revision)	LITD 07
57	IS 12746 : Part 2 : 1989	Telecontrol equipment and systems: Part 2 environmental conditions and power supplies	LITD 10
58	IS 9409 : 1980	Classification of electrical and electronic equipment with regard to protection against electric shock	ETD 01
59	IS/IEC 60947 : Part 4 : Sec 1 : 2012	Low - Voltage switchgear and controlgear: Part 4 contactors and motor - Starters: Sec 1 electromechanical contactors and motor - Starters (First Revision)	ETD 07
60	IS 14577 : 1998	Short - Circuit current evaluation with special regard to rated short - Circuit capacity of circuit - Breakers in installations in ships - Guide	ETD 07
61	IS/IEC 62271 : PART 1 : 2007	High - Voltage switchgear and controlgear: Part 1 common specifications	ETD 08
62	IS 3854 : 1997	Switches for domestic and similar purposes - Specification (Second Revision)	ETD 14
63	IS 11954 : 1987	Guide for colour coding of electrical mimic diagrams	ETD 01
64	IS 5613 : Part 3 : Sec 1 : 1989	Code of practice for design, installation and maintenance for overhead power lines: Part 3 400 kV lines: Sec 1 design	ETD 37
65	IS/ISO 5116 : Part 2 : 2021	Improving transparency in financial and business reporting Harmonization topics - Part 2: Guidelines for data point modelling	SSD 03
66	IS/ISO 5009 : 2022	Financial services- Official organizational roles- Scheme for official organizational roles	SSD 03
67	IS 13360 : Part 5 : Sec 3 : 2022	PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 3 DETERMINATION OF TENSILE PROPERTIES TEST CONDITIONS FOR FILMS AND SHEETS	PCD 27
68	IS 12640 : Part 1 : 2016	Residual current operated circuitBreakers without integral overcurrent protection for household and similar uses (Rccbs): Part 1 general rules (Second Revision)	ETD 07
69	IS 5563 : 1985	Specification for screw conveyors for industrial use (First Revision)	MED 06
70	IS 9283 : 2013	Motors for submersible pumpsets - Specification (Second Revision)	ETD 15
71	IS 7206 : Part 1 : 1986	General requirements for direct circulation rotary drilling rigs: Part 1 with rotary table (First Revision)	MED 21
72	IS/IEC 60127 : PART 1 : 2006	Miniature fuses: Part 1 definitions for miniature fuses and general requirements for miniature fuse - Links (First Revision)	ETD 39
73	IS 18254 : 2023	Ergonomics of the physical environment Application of International Standards to people with special requirements Adoption of ISO 28803: 2012	PGD 15
74	IS/IEC 62368 : Part 1 : 2018	Audio / Video, Information and Communication Technology Equipment Part 1: Safety Requirements ( First Revision )	LITD 07
75	IS 996 : 2009	Single phase a.c. induction motors for general purpose (Third Revision)	ETD 15
76	IS 14578 : 1999	Three - Phase induction motors for use in nuclear power plants - Specification	ETD 15
77	IS 9203 : Part 2 : 2023	FRICTION ROLLERS FOR MINE HAULAGE TRACKS SPECIFICATION PART 2 PARALLEL ROLLERS First Revision of IS 9203 Part 2	MED 08

Classification Details

Certification	:
Group	:	Electrical Appliances and Accessories
Sub Group	:	Domestic Appliances
Sub Sub Group	:	Safety of electrical appliances
Aspect	:	Terminology

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Gazette Document : 0

Classification details for: IS 12360 : 1988

Cross Reference Details

Cross Reference Details

Classification Details