Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS/IEC 62368-1:2023
IEC 62368-1:2023

IS Title/आईएस शीर्षक : Audio Video Information and Communication Technology Equipment - Part 1: Safety Requirements (Second Revision)

Superseding IS/सुपरसीडिंग आईएस : IS/IEC 62368 : Part 1 : 2018

Degree of Equivalence/समतुल्यता स्तर : Identical under single numbering

Number of Revisions/पुनरीक्षणों की संख्या : 2

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Safety Standard

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : LITD (Electronics and Information Technology Department)

Technical Committee/तकनीकी समिति : LITD 07 (Audio, Video, Multimedia Systems And Communication Equipment Sectional Committee Sectional Committee)

Member Secretary/सदस्य सचिव : VIJAY KUMAR GAURAW (SCIENTIST-D)

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 6

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 33

Click to view

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS/IEC 62368-1:2023
IEC 62368-1:2023
:

1	IS 3722 : Part 1 : 2023	LETTER SYMBOLS AND SIGNS USED IN ELECTRICAL TECHNOLOGY - PART 1: GENERAL (Second Revision)	ETD 01
2	IS 12360:2026	Voltage bands for electrical installations including preferred voltages and frequency	ETD 01
3	IS 18341:2023 IEC 61229 : 2002 (Ed 1.2)	Environmental Testing Part 2 Tests Section 6 Test Fc: Vibration sinusoidal	LITD 01
4	IS 9000 (Part 4):2020 IEC 60068-2-78 : 2012	Environmental Testing Part 4 Tests - Test Cab: Damp Heat, Steady State ( Second Revision )	LITD 01
5	IS 18340:2023	Basic and safety principles for man-machine interface marking and identification - Coding principles for indicators and actuators	ETD 01
6	IS 1271:2012 IEC 60085	Electrical insulation - Thermal evaluation and designation (Second Revision)	ETD 02
7	IS 18770 (Part 2):2024 ISO 10705-2 : 2000	Methods of Measurement on Receivers for Television Broadcast Transmissions Part 13: General Considerations - Measurements at Radio and Video Frequencies	LITD 07
8	IS 694:2010	Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1 100 V (Fourth Revision)	ETD 09
9	IS 9968 (Part 1):2025	Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision)	ETD 09
10	IS 15596 (Part 1):2005 IEC 60268-1	Sound System Equipment Part 1: General	LITD 07
11	IS 13730 (Part 43):2013 IEC 60317-43	Specification for particular types of winding wires: Part 43 aromatic polyimide tape wrapped round copper wire, class 240 (First Revision)	ETD 33
12	IS/IEC 60320 : PART 1 : 2021	Appliance couplers for household and similar general purposes Part 1: General requirements Second Revision	ETD 14
13	IS 14980 (Part 3):2024 ISO 8759-3:2018	Insulation Coordination for Equipment Within Low-Voltage Systems Part 1 Principles Requirements and Tests	ETD 19
14	IS 15382 (Part 3):2019 IEC 60664-3 : 2016	Insulation Coordination for Equipment within Low-Voltage Systems Part 3 Use of Coating, Potting or Moulding for Protection against Pollution (First Revision)	ETD 19
15	IS/IEC :2023 IEC 60691:2023	Thermal Links - Requirements and Application Guide (First Revision)	ETD 39
16	IS 19210:2025	Fire Hazard Testing Part 2: Glowinghot-wire based test methods Section 11: Glow-wire flammability test method for end products GWEPT	LITD 01
17	IS/IEC 60695-10-2:2014 IEC 60695-10-2 : 2014	Fire hazard testing: Part 10 Abnormal heat: Sec 2 ball pressure test method	LITD 01
18	IS/IEC 60695-11-5:2016 IEC 60695-11-5 : 2016	Fire Hazard Testing Part 11 Test Flames Section 5 Needle - Flame test method - Apparatus, confirmatory test arrangement and guidance ( First Revision )	LITD 01
19	IS/IEC 60695-11-10:2013 IEC 60695-11-10 : 2013	Fire hazard testing: Part 11 test flames :: Sec 10 50 w horizontal and vertical flame test methods	LITD 01
20	IS 13778 (Part 3):2024 IEC 60851-3:2023	Winding wires - Test methods: Part 3 mechanical properties (First Revision)	ETD 33
21	IS 13778 (Part 5):2012 IEC 60851-5 : 2008	Winding wires - Test methods: Part 5 electrical properties (First Revision)	ETD 33
22	IS/IEC 62341-6-1:2017 IEC 62341-6-1 : 2017	Plugs and Socket-Outlets for Household and Similar Purposes of Rated Voltage up to and Including 250 V and Rated Current up to and Including 16 A - Specification ( Fourth Revision )	ETD 14
23	IS 18995 (Part 4):2025 ISO 7787-4:2002	LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR PART 1 GENERAL RULES	ETD 07
24	IS/IEC 60947-5-5:2016 IEC 60947-5-5 : 2016	Low - Voltage switchgear and controlgear: Part 5 control circuit devices and switching elements: Sec 5 electrical emergency stop devices with mechanical latching function	ETD 07
25	IS/IEC 60990:2016 IEC 60990 : 1999	Methods of Measurement of Touch Current and Protective Conductor Current (First Revision)	LITD 07
26	IS/IEC 60998-1:2002 IEC 60998-1 : 2002	Connecting Devices for Low-Voltage Circuits for Household and Similar Purposes Part 1 General Requirements	ETD 14
27	IS 16220 (Part 1):2015 IEC 61056-1 : 2012	General purpose lead - Acid batteries (Valve - Regulated Types): Part 1 general requirements, functional characteristics - Methods of test	ETD 11
28	IS 16220 (Part 2):2017 IEC 61056-2 : 2012	General Purpose Lead-Acid Batteries (Valve-Regulated Types) Part 2 Dimensions, Terminals and Marking	ETD 11
29	IS 18996 (Part 1):2025 ISO 9173-1:2016	Switches for appliances: Part 1 general requirements First revision	ETD 14
30	IS/IEC 61204-7:2016 IEC 61204-7 : 2016	Low-Voltage Power Supplies, d.c. Output Part 7 Safety Requirements	ETD 31
31	IS 6964:2018 IEC 61260-1 : 2014	Electroacoustics - Octave - Band and Fractional Octave Band Filters - Specificaitons (Second Revision)	LITD 07
32	IS 16463 (Part 11):2016 IEC 61643-11 : 2011	Low - Voltage surge protective devices: Part 11 surge protective devices connected to low - Voltage power systems - Requirements and test methods	ETD 07
33	IS 17064 (Part 1):2018 IEC 61810-1 : 2015	Electromechanical elementary relays: Part 1 general and safety requirements	ETD 35
34	IS 16823:2019 IEC 61959 : 2004	Secondary cells and batteries containing alkaline or other non - acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries	ETD 11
35	IS 6191 (Part 8):2025 ISO 17228:2015	Safety of Machinery - Functional Safety of Safety-Related Control Systems ( First Revision )	ETD 44
36	IS 16046 (Part 1):2018 IEC 62133-1 : 2017	Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 1 Nickel Systems ( Second Revision )	ETD 11
37	IS 16046 (Part 2):2018 IEC 62133-2 : 2017	Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells and for Batteries Made from Them for Use in Portable Applications Part 2 Lithium Systems ( Second Revision )	ETD 11
38	IS 16108:2012 IEC 62471 :2006	Photobiological safety of lamps and lamp systems	ETD 23
39	IS 16894 (Part 2):2018 IEC 62485-2 : 2010	Safety requirements for secondary batteries and battery installations: Part 2 stationary batteries	ETD 11
40	IS 17618 (Part 6):2021	Methods of Test for Vulcanized Rubber Part 1 Tensile Stress-Strain Properties	PCD 29
41	IS 18470:2024	PLASTICS METHOD OF TESTING PART 5 MECHANICAL PROPERTIES SECTION 7 DETERMINATION OF FLEXURAL PROPERTIES	PCD 27
42	IS 4774 (Part 3):2022 ISO 3548-3 : 2012	Plastics - Methods of testing: Part 5 Mechanical properties Section 1 Determination of tensile properties - General requirements Second Revision	PCD 27
43	IS 13360 (Part 5/Sec 2):2017 ISO 527-2 : 2012	Plastics - Methods of testing: Part 5 mechanical properties section 2 determination of tensile properties - Test conditions for moulding and extrusion plastics (First Revision)	PCD 27
44	IS 13360 : Part 6 : Sec 21 : 2023	PLASTICS METHODS OF TESTING PART 6 THERMAL PROPERTIES SECTION 21 DETERMINATION OF IGNITION TEMPERATURE USING A HOT-AIR FURNACE	PCD 27
45	IS 1448 (Part 21):2019 ISO 2719 : 2016	Methods of test for petroleum and its products [P : 21] determination of flash point - Pensky - Martens closed cup method (Fourth Revision)	PCD 01
46	IS 16449 (Part 1):2018	Graphical symbols - Safety colours and safety signs: Part 1 design principles for safety signs and safety markings	PGD 01
47	IS/IEC 62044-1:2002 IS/IEC 62044-1:2002	Graphical Symbols - Safety Colours and Safety Signs Part 2 Design Principles for Product Safety Labels	PGD 01
48	IS 16449 (Part 3):2018 ISO 3864-3 : 2012	Graphical Symbols- Safety Colours and Safety Signs Part 3 Design Principles for Graphical Symbols for Use in Safety Signs	PGD 01
49	IS 16449 (Part 4):2017 ISO 3864-4 : 2011	Graphical symbols - Safety colours and safety signs: Part 4 colorimetric and photometric properties of safety sign materials	PGD 01
50	IS 18370:2023 ISO 20784:2021	Plastics Methods of Exposure to Laboratory Light Sources: Part 1 General Guidance	PCD 27
51	IS 18372:2023 ISO 13299 : 2016	Plastics Methods of Exposure to Laboratory Light Sources: Part 2 Xenon-Arc Lamps	PCD 27
52	IS/ISO 22327:2018 ISO 22327: 2018	Plastics Methods of Exposure to Laboratory Light Sources: Part 4 Open-Flame Carbon-Arc Lamps	PCD 27
53	IS 19143 (Part 3/Sec 1):2025 IEC 62933-3-1: 2018	Graphical Symbols for Use on Equipment Registered Symbols	PGD 01
54	IS/ISO 14083:2023 ISO 14083 : 2023	Graphical Symbols Safety Colours and Safety Signs Registered Safety Signs	PGD 01
55	IS 18365 (Part 2):2023 ISO 13300-2:2006	Plastics — Methods of Testing Part 5 Mechanical Properties Section 27 Determination of tensile-impact strength	PCD 27
56	IS 13360 (Part 6/Sec 23):2006	Plastics - Methods of testing: Part 6 thermal properties section 23 determination of burning behaviour of thin fiexibie verticai specimens in contact with smaii - Fiame ignition source	PCD 27

International Standards Referred In IS/IEC 62368-1:2023
IEC 62368-1:2023

1	IEC 60068 : 2 : 11
2	IEC 60083 : 0 : 0 0
3	IEC 60086 : 4 : 0 0
4	IEC 60086 : 5 : 0 0
5	IEC 60112 : 0 : 0 0
6	IEC 60127 : 0 : 0 0
7	IEC 60127 : 8 : 0 0
8	IEC 60243 : 1 : 0 0
9	IEC 60309 : 0 : 0 0
10	IEC 60317 : 0 : 0 0
11	IEC 60317 : 0 : 7 2017
12	IEC 60317 : 56 : 0 0
13	IEC 60320 : 0 : 0 0
14	IEC 60320 : 2 : 4
15	IEC 60320 : 3 : 0 0
16	IEC 60332 : 1 : 2
17	IEC 60332 : 1 : 3
18	IEC 60332 : 2 : 2
19	IEC 60384 : 14 : 2013
20	IEC 60417 : 0 : 0 0
21	IEC 60529 : 1989
22	IEC 60529 : 1989
23	IEC 60695 : 10 : 3
24	IEC 60695 : 11 : 20 2015
25	IEC 60695 : 11 : 21
26	IEC 60728 : 11 : 2016
27	IEC 60730 : 0 : 0 0
28	IEC 60730 : 1 : 2022
29	IEC 60738 : 1 : 2022
30	IEC 60747 : 5 : 5 2020
31	IEC 60825 : 1 : 2014
32	IEC 60825 : 2 : 0 0
33	IEC 60825 : 12 : 0 0
34	IEC 60896 : 11 : 0 0
35	IEC 60896 : 21 : 2004
36	IEC 60896 : 22 : 0 0
37	IEC 60999 : 1 : 0 0
38	IEC 60999 : 2 : 0 0
39	IEC 61051 : 1 : 0 0
40	IEC 61051 : 2 : 2021
41	IEC 61293 : 0 : 0 0
42	IEC 61427 : 0 : 0 0
43	IEC 61430 : 0 : 0 0
44	IEC 61434 : 0 : 0 0
45	IEC 61558 : 1 : 2017
46	IEC 61558 : 2 : 16
47	IEC 61587 : 1 : 2022
48	IEC 61643 : 331 : 2020
49	IEC 61984 : 0 : 0 0
50	IEC 62230 : 0 : 0 0
51	IEC 62281 : 0 : 0 0
52	IEC 62440 : 2008
53	IEC 62471 : 5 : 2015
54	IEC 62619 : 2022
55	IEC 62821 : 1 : 0 0
56	IEC 62821 : 2 : 0 0
57	IEC 62821 : 3 : 0 0
58	IEC 63010 : 1 : 0 0
59	IEC 63010 : 2 : 0 0
60	IEC 63294 : 2021
61	ISO 179 : 1 : 0 0
62	ISO 180 : 0 : 0 0
63	ISO 306 : 0 : 0 0
64	ISO 1798 : 0 : 0 0
65	ISO 1817 : 2022
66	ISO 3679 : 0 : 0 0
67	ISO 9772 : 0 : 0 0

IS/IEC 62368-1:2023
IEC 62368-1:2023
is Referred in following Indian Standards :

1	IS/IEC 61204 : Part 3 : 2016	Low-Voltage Switch Mode Power Supplies Part 3 Electromagnetic Compatibility ( EMC )	ETD 31
2	IS 1180 : Part 3 : 2021	Outdoor/Indoor Type Liquid Immersed Distribution Transformers Up to and Including 2 500 kVA, 33 kV — Specification Part 3 Natural/Synthetic Organic Ester Liquid Immersed	ETD 16
3	IS/IEC 62341 : Part 5 : 2009	Organic Light Emitting Diode OLED displays- Part 5: Environmental testing methods	LITD 04
4	IS 3025 : Part 77 : 2021	Methods of Sampling and Test Physical and Chemical for Water and Wastewater Part 77 Determination of Soluble Silicates by Flow Analysis (FIA and CFA) and Photometric Detection	CHD 36
5	IS 1448 : Part 189 : 2021	PETROLEUM PRODUCTS - DETERMINATION OF CARBON RESIDUE - MICRO METHOD	PCD 01
6	IS 16422 : 2016	Interoperability specifications of common external power supply (EPS) for use with data - Enabled mobile phones	LITD 07
7	IS 2032 : Part 19 : 1977	Graphical symbols used in electrotechnology: Part 19 electrical equipment used in medical practice	ETD 01
8	IS 15475 : Part 2 : 2022	CODE OF RECOMMENDED PRACTICE FOR AMUSEMENT RIDES SAFETY PART 2 SAFETY REQUIREMENTS (first revision)	MED 06
9	IS 13450 : Part 1 : 2018	Medical electrical equipment: Part 1 general requirements for basic safety and essential performance (Second Revision)	MHD 15
10	IS/ISO/IEC/TR 12785 : Part 3 : 2012	Information technology - Learning education and training - Content packaging Part 3: Best practice and implementation guide	LITD 19
11	IS/IEC 62680 : Part 3 : Sec 1 : 2017	Universal Serial Bus Interfaces for Data and Power Part 3-1: Universal Serial Bus 3.1 Specification	LITD 07
12	IS 302 : Part 1 : 2008	Safety of household and similar electrical appliances: Part 1 general requirements (Sixth Revision)	ETD 32
13	IS 13502 : 2023	PIG IRON- SPECIFICATION	MTD 06
14	IS/ISO/IEC 20000 : Part 3 : 2019	Information technology - Service management - Part 3: Guidance on scope definition and applicability of ISOIEC 20000-1 (First Revision)	LITD 14
15	IS/ISO 12643 : Part 2 : 2010	Graphic technology - Safety requirements for graphic technology equipment and systems: Part 2 prepress and press equipment and systems	MED 25
16	IS/ISO 12643 : Part 2 : 2010	Graphic technology - Safety requirements for graphic technology equipment and systems: Part 2 prepress and press equipment and systems	MED 25
17	IS 9968 : Part 1 : 1988	Specification for elastomer insulated cables: Part 1 for working voltages up to and including 1 100 volts (First Revision)	ETD 09

Classification Details

Certification	:
Group	:	Electronic and Telecom equipments, components and devices
Sub Group	:	Audio, video equipments and systems
Sub Sub Group	:	Audio equipment and systems
Aspect	:	Safety Standard

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 6

License : 0

Product Manual & SIT : 0

Laboratory : 33

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details