Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS 800:2007

IS Title/आईएस शीर्षक : General construction in steel - Code of practice (Third Revision)

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Indigenous

Number of Revisions/पुनरीक्षणों की संख्या : 3

Number of Amendments/संशोधनों की संख्या : 2

Aspect/पक्ष : Code of Practice

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : CED (Civil Engineering Department)

Technical Committee/तकनीकी समिति : CED 07 (Structural Engineering And Structural Sections Sectional Committee)

Member Secretary/सदस्य सचिव : PRADEEP SINGH SHEKHAWAT

Other Details

Indian Standard

Click to download

Amendment : 2

Click to download

Gazette Document : 1

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS 800:2007
:

1	:
2	IS 801:1975	Code of practice for use of cold - Formed light gauge steel structural members in general building construction (First Revision)	CED 07
3	IS 808:2021	Dimensions for hot rolled steel beam, column, channel and angle sections (Third Revision)	CED 07
4	IS 813:1986	Scheme Of Symbols For Welding	MTD 11
5	IS 814:2004	Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)	MTD 11
6	IS 816:1969 Reviewed In : 2023 Reaffirmed but not taken up for revision	Code of practice for use of metal arc welding for general construction in mild steel (First Revision)	MTD 11
7	IS 817:1966 Reviewed In : 2023 Reaffirmed but not taken up for revision	Code of practice for training and testing of metal arc welders (Revised)	MTD 11
8	IS 817 (Part 1):1992 Reviewed In : 2023 Reaffirmed but not taken up for revision	Training of welders - Code of practice: Part 1 manual metal arc welding (Second Revision)	MTD 11
9	IS 817 (Part 2):1996 Reviewed In : 2023 Reaffirmed but not taken up for revision	Training of welders - Code of practice: Part 2 oxyfuel welding (Second Revision)	MTD 11
10	IS 819:1957 Reviewed In : 2023 Reaffirmed but not taken up for revision	Code of practice for resistance spot welding for light assemblies in mild steel	MTD 11
11	IS 875 (Part 1):2026	Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 1 dead loads - Unit weights of building materials and stored materials (Second Revision)	CED 37
12	IS 875 (Part 2):1987 Decision taken to Reaffirm and Archive	Code of practice for design loads (Other Than Earthquake) for buildings and structures: Part 2 imposed loads (Second Revision)	CED 37
13	IS 875 (Part 5):1987 Decision taken to Reaffirm and Archive	Design loads (Other Than Earthquake) for buildings and structures - Cod of practice for : Part 5 special loads and load combinations (Second Revision)	CED 37
14	IS 919 (Part 1):2014 ISO 286-1 : 2010	Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on Linear Sizes Part 1 Basis of Tolerance, Deviation and Fits (Third Revision)	PGD 37
15	IS 962:1989	Code of practice for architectural and building drawings (Second Revision)	CED 51
16	IS 1024:2025	Use of welding in bridges and structures subject to dynamic loading - Code of practice (Second Revision)	MTD 11
17	IS 1030:1998	Carbon steel castings for general engineering purposes - Specification (Fifth Revision)	MTD 14
18	IS 1079:2017	Hot rolled carbon steel sheet, plate and strip - Specification (Seventh Revision)	MTD 04
19	IS 1148:2009	Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes	MTD 04
20	IS 1149:1982	High tensile steel rivet bars for structural purposes	MTD 04
21	IS 1261:1959 Reviewed In : 2023 Reaffirmed but not taken up for revision	Code of practice for seam welding in mild steel	MTD 11
22	IS 1278:1972	Specification for filler rods and wires for gas welding (Second Revision)	MTD 11
23	IS 1323:1982 Reviewed In : 2023 Reaffirmed but not taken up for revision	Code of practice for Oxy - Acetylene welding for structural work in mild (Second Revision)	MTD 11
24	IS 1363 (Part 1):2023 ISO 4016 : 2022	Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 1 Hexagon Head Bolts ( Size Range M 5 to M 64 ) ( Fifth Revision )	PGD 37
25	IS 1363 (Part 2):2023 ISO 4018 : 2022	Hexagon Head Bolts, Screws and Nuts of Product Grade ‘C’ Part 2 Hexagon Head Screws ( Size Range M 5 to M 64 ) ( Fifth Revision )	PGD 37
26	IS 1363 (Part 3):2002 ISO 4034	Hexagon Head Bolts, Screws and Nuts of Product Grade â€˜Câ€™ Part 3 (Style 1) Hexagon Nuts ( Size Range M 5 to M 64 ) ( Fifth Revision )	PGD 37
27	IS 1364 (Part 1):2023 ISO 4014 : 2022	Hexagon head bolts, screws and nuts of product grades A and B: Part 1 hexagon head bolts (Size Range M 1.6 To M 64) (Fifth Revision)	PGD 37
28	IS 1364 (Part 2):2023 ISO 4017 : 2022	Hexagon head bolts, screws and nuts of product grades A and B: Part 2 hexagon head screws (Size Range M 1.6 To M 64) (Fifth Revision)	PGD 37
29	IS 1364 (Part 3):2026	Hexagon Head Bolts, Screws and Nuts of Product Grades A and B Part 3 Hexagon Nuts, Style 1 ( Size Range M 1.6 To M 64 )	PGD 37
30	IS 1364 (Part 4):2025 ISO 4035 : 2023	Hexagon head bolts, screws and nuts of product grades A and B: Part 4 hexagon thin nuts (Chamfered) (Size Range M1.6t0 M64) (Fourth Revision)	PGD 37
31	IS 1364 (Part 5):2002 ISO 4036	Hexagon head bolts, screws and nuts of product grades A and B: Part 5 hexagon thin nuts - Product grade B (Unchamfered) (Size Range M 1.6t0 M 10) (Fourth Revision)	PGD 37
32	IS 1367 (Part 1):2014 ISO 8992 : 2005	Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision)	PGD 37
33	IS 1367 (Part 2):2002 ISO 4759-1	Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision)	PGD 37
34	IS 1367 (Part 3):2017 ISO 898-1 : 2013	Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)	PGD 37
35	IS 1367 (Part 5):2018 ISO 898-5 : 2012	Technical supply conditions for threaded steel fasteners: Part 5 mechanical properties of fasteners made of carbon steel and alloy steel - Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (Fourth Revision)	PGD 37
36	IS 1367 (Part 6):2025 ISO 898-2 : 2022	Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)	PGD 37
37	IS 1367 (Part 7):1980	Technical supply conditions for tHreadeD steel fasteners: Part 7 mechanical properties and test methods for nuts without specified proof loads (Second Revision)	PGD 37
38	IS 1367 (Part 8):2020 ISO 2320 : 2015	Technical Supply Conditions for Threaded Steel Fasteners Part 8 Prevailing Torque Type Steel Nuts — Functional Properties ( Fifth Revision )	PGD 37

International Standards Referred In IS 800:2007

Standard contains no Cross Referenced International Standard.

IS 800:2007
is Referred in following Indian Standards :

1	SP 43 (S&T) : 1987	Handbook on Structures with Reinforced Concrete Portal Frames (Without Cranes)	CED 38
2	IS 9178 : Part 2 : 1979	Criteria for design of steel bins for storage of bulk materials: Part 2 design criteria	CED 38
3	SP 6 : Part 4 : 1969	Isi handbook for structural engineers: Part 4 use of high strength friction grip bolts	CED 07
4	SP 6 : Part 5 : 1980	Handbook for structural engineers: Part 5 cold - Formed, light gauge steel structures	CED 07
5	SP 6 : Part 6 : 1972	Isi handbook for structural engineers: Part 6 application of plastic theory in design of steel structures: sec A	CED 07
6	IS 2792 : 1964	Code of practice for design and construction of stone slab over joist floor	CED 13
7	IS 2119 : 1980	Code of practice for construction of brick - Cum - Concrete composite (Madras Terrace) floor and roof	CED 13
8	IS 2118 : 1980	Code of practice for construction of jack - Arch type of built - Up floor or roof (First Revision)	CED 13
9	IS 11388 : 2012	Recommendations for design of trash racks for intakes (Second Revision)	WRD 14
10	IS 4880 : Part 6 : 1971	Code of practice for design of tunnels conveying water: Part 6 tunnel supports	WRD 14
11	IS 14687 : 1999	Falsework for Concrete Structures - Guidelines	CED 02
12	IS 4247 : Part 3 : 1998	Code of practicefor structural design of surfacehydel power stations: Part 3 sub - Structure (Second Revision)	WRD 15
13	IS 4247 : Part 2 : 1992	Code of practice for structural design of surface hydroelectric power station: Part 2 superstructure (Second Revision)	WRD 15
14	IS 7207 : 1992	Criteria for design of generator foundation for hydroelectric powe rstations (First Revision)	WRD 15
15	IS 4622 : 2020	Recommendations for Structural Design of Fixed-Wheel Gates ( Fourth Revision )	WRD 12
16	IS 6938 : 2005	Design of rope drum and chain hoists for hydraulic gates - Code of practice (Second Revision)	WRD 12
17	IS 4623 : 2000	Recommendations for structural design of radial gates (Third Revision)	WRD 12
18	IS 4410 : Part 23 : 1999	Glossary of terms relating to river valley projects	WRD 12
19	IS 807 : 2006	Design, erection and testing (Structural Portion) of cranes and hoists - Code of practice (Second Revision)	MED 14
20	IS 3938 : 1983	Specification for electric wire rope hoists (Second Revision)	MED 14
21	IS 9178 : Part 3 : 1980	Criteria for Design of Steel Bins for Storage of Bulk Materials - Part 3 : Bins Designed for Mass Flow and Funnel Flow	CED 38
22	IS 6332 : 1984	Code of practice for construction of floor and roofs using precast doubly-curved shell units	CED 13
23	IS 5606 : 1970	Specification for steel bins for grain storage	FAD 16
24	IS 16144 : 2014	Foodgrain storage godowns - Code of practice	FAD 16
25	IS 11592 : 2000	Selection and design of belt conveyors - Code of practice (First Revision)	MED 06
26	IS 2825 : 1969	Code for unfired pressure vessels	MED 01
27	IS 10470 : 1983	Specification for air cooled heat exchangers	MED 01
28	IS 9881 : 2007	Container spreaders - Specification (First Revision)	TED 33
29	IS 13043 : 1991	Covered manual metal arc welding electrodes - Determination of efficiency, metal recovery and deposition co - Efficient	MTD 11
30	IS 16471 : 2017	Protection of below ground structures against water from the ground - Guidelines	CED 41
31	IS 1893 : Part 1 : 2016	Design Earthquake Hazard and Criteria for Earthquake-Resistant Design of Structures Part 1 General Provisions ( Seventh Revision )	CED 39
32	IS 4772 : 2019	Code of practice for construction of sugar godowns (Second Revision)	FAD 02
33	IS 9706 : 2019	Material handling ropeways - Code of practice (Second Revision)	MED 06
34	IS 16648 : Part 4 : 2018	Concentrated Solar Thermal - Specification Part 4 Non-Imaging Concentrator	MED 04
35	IS 17164 : 2020	Design and Construction of Cyclone Shelters - Guidelines	CED 57
36	IS 11504 : 2020	Criteria for Structural Design of Reinforced Concrete Natural Draught Cooling Towers ( First Revision )	CED 38
37	IS 802 : Part 2 : 1978	Code of practice for use of structural steel in overhead transmission line towers: Part 2 fabrication galvanizing, inspection and packing	CED 07
38	IS 17597 : 2021	Textile glass -- Yarns -- Basis for a specification	TXD 40
39	IS 5521 : 1980	Specification for steel tanks for storage of molasses (First Revision)	FAD 02
40	IS 15475 : Part 3 : 2004	Code of recommended practice for amusement rides safety: Part 3 design, manufacture and erection	MED 06
41	IS 15026 : 2002	Tunneling methods in rock masses - Guidelines	CED 48
42	IS 15770 : 2021	Heating Oil(LDO) - Specification	PCD 03
43	IS/IEC 60110 : Part 1 : 1998	Power Capacitors for Induction Heating Installations Part 1 General (First Revision)	ETD 29
44	IS 9478 : 1989	Family size bio - Gas plant - Code of practice (Second Revision)	MED 04
45	IS 14362 : 1996	Pile boring equipment - General requirements	MED 18
46	IS/ISO/IEC/TR 24029 : Part 1 : 2021	Artificial Intelligence ( AI ) - Assessment of the Robustness of Neural Networks Part 1: Overview	LITD 30
47	IS 15498 : 2004	Guidelines for improving the cyclonic resistance of low rise houses and other buildings/structures	CED 57
48	IS/ISO 26262 : Part 10 : 2018	Road vehicles Functional safety Part 10: Guidelines on ISO 26262	TED 11
49	IS 4651 : Part 4 : 2014	Planning and design of ports and harbours - Code of practice: Part 4 general design considerations (Third Revision)	CED 47
50	IS 1893 : Part 4 : 2015	Criteria for Earthquake Resistant Design of Structures Part 4 Industrial Structures Including Stack - Like Structures ( First Revision )	CED 39
51	IS 14567 : 1998	Winding in mines - Design of cages - Guidelines	MED 08
52	IS 4991 : 1968	Criteria for blast resistant design of structures for explosions above ground	CED 39
53	IS 7206 : Part 1 : 1986	General requirements for direct circulation rotary drilling rigs: Part 1 with rotary table (First Revision)	MED 21
54	IS 12450 : Part 1 : 1988	Steel headframes for mines: Part 1 principles of load computation and applicable factors of safety	MED 08

Classification Details

Certification	:
Group	:	Civil Engineering Design and Construction
Sub Group	:	Steel and Aluminium Structures
Sub Sub Group	:	Steel (including transmission line towers) & aluminium structures and their construction
Aspect	:	Code of Practice

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 2

Gazette Document : 1

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details