Know Your Standard Standards under Mandatory Certification Group Wise Classification Ministry/Department Wise Classification
( Sub Group : Automobiles and their components )
Total Standards : 548
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10000 : Part 1 : 1980 |
Methods of tests for internal combustion engines: Part 1 glossary of terms relating to test methods | 0 | Nov, 2020 | Download | |
| 2 | IS 10000 : Part 2 : 1980 |
Methods of tests for internal combustion engines Part 2 standar d reference conditions | 1 | Nov, 2020 | Download | |
| 3 | IS 10000 : Part 3 : 1980 |
Methods of tests for internal combustion engines: Part 3 measurements for testing - Units and limits of accuracy | 1 | Nov, 2020 | Download | |
| 4 | IS 10000 : Part 4 : 1980 |
Methods of tests for internal combustion engines: Part 4 declaration of power, efficiency, fuel consumption and lubricating oil consumption | 1 | Nov, 2020 | Download | |
| 5 | IS 10000 : Part 5 : 1980 |
Methods of tests for internal combustion engines: Part 5 preparation for tests and measurements for wear | 1 | Nov, 2020 | Download | |
| 6 | IS 10000 : Part 6 : 1980 |
Methods of tests for internal combustion engines: Part 6 recording of test results | 1 | Nov, 2020 | Download | |
| 7 | IS 10000 : Part 7 : 1980 |
Methods of tests for internal combustion, engines: Part 7 governing tests for constant speed engines and selection of engines for use with electrical generators | 2 | Nov, 2020 | Download | |
| 8 | IS 10000 : Part 8 : 1980 |
Methods of tests for internal combustion engines Part 8 performance tests | 1 | Nov, 2020 | Download | |
| 9 | IS 10000 : Part 9 : 1980 |
Methods of tests for internal combustion engines: Part 9 endurance tests | 0 | Nov, 2020 | Download | |
| 10 | IS 10000 : Part 10 : 1980 |
Methods of tests for internal combustion engines: Part 10 tests for smoke levels, limits and corrections for smoke levels for variable ,speed compression ignition engines | 0 | Nov, 2020 | Download | |
| 11 | IS 10000 : Part 11 : 1980 |
Methqds of tests for internal combustion engines: Part 11 information to be supplied by the purchaser to the manufacturer and information to be supplied by the manufacturer along with the engine | 0 | Nov, 2020 | Download | |
| 12 | IS 10000 : Part 12 : 1980 |
Methods of tests for internal combustion engines: Part 12 specimen test certificates | 0 | Nov, 2020 | Download | |
| 13 | IS 10000 : Part 13 : 2002 |
Methods of tests for internal combustion engines: Part 13 recommendations on nature of tests required for functional changes in critical components | 1 | Dec, 2018 | Download | |
| 14 | IS 10001 : 1981 |
Performance Requirements for Constant Speed Compression ignition (diesel) engines for general purposes (up to 20 kW) | 6 | Jul, 2021 | Buy | |
| 15 | IS H10001 : 1981 |
Specification for performance requirements for constant speed compression ignition (Diesel) engines for general purposes (Up To 20 Kw) | 6 | Jul, 2021 | Buy | |
| 16 | IS 10002 : 1981 |
Specification for performance requirements for constant speed compression ignition (Diesel) engines for general purposes (Above 20 KW) | 3 | Jul, 2021 | Buy | |
| 17 | IS 10063 : 1982 |
Dimensions of end fittings of rear shock absorbers for scooters and motorcycle - S | 0 | Mar, 2019 | Download | |
| 18 | IS 10105 : 1982 |
Specification for fittings for cylinder pressure indicators for internal combustion engines | 2 | Sep, 2019 | Download | |
| 19 | IS 10250 : 1982 |
Specification for severities for environmental tests for automotive electrical equipment | 2 | Jan, 2021 | Download | |
| 20 | IS 10278 : 2018 (4 Revision) |
Motorcycles - Measurement of maximum speed (Third Revision) | 0 | Jan, 2023 | Download | |
| 21 | IS 10311 : 1982 |
General requirements of powered platform trucks and their acceptance criteria | 0 | Jul, 2021 | Download | |
| 22 | IS 10312 : 1982 |
Safety code for powered tow trucks | 0 | Jul, 2021 | Download | |
| 23 | IS 10323 : 2019 (1 Revision) |
Crank and chain wheel for moped - Specification (First Revision) | 0 | ---- | Download | |
| 24 | IS 10331 : 1982 |
Specification for fuel tap for mopeds | 0 | Dec, 2022 | Download | |
| 25 | IS 10393 : 1982 |
Specifjcation for electrical connector for tractor - Trailer jumper cable | 0 | Feb, 2022 | Download | |
| 26 | IS 10407 : 1998 (2 Revision) |
Automotive vehicles - Two wheelers - Acceleration performance - Method of evaluation (Second Revision) | 0 | Jun, 2018 | Download | |
| 27 | IS 10478 : 2018/ISO 6519:2015 (2 Revision) |
Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs (Second Revision) | 0 | ---- | Buy | |
| 28 | IS/ISO 105 : Part J03 : 2009/ISO 18885-2:2018 |
Textiles Tests for colour fastness Part J03: Calculation of colour differences | 0 | ---- | Buy | |
| 29 | IS 10517 : 2019 (1 Revision) |
Acceptance criteria for fork - Lift trucks (First Revision) | 0 | Mar, 2021 | Download | |
| 30 | IS 10533 : 1983 |
Specification for valve guides for internal combustion engines | 0 | Sep, 2019 | Download | |
| 31 | IS 1062 : 2014/ISO 11565:2006 (3 Revision) |
Road vehicles - Spark - Plugs - Test methods and requirements (Third Revision) | 0 | Jun, 2019 | Buy | |
| 32 | IS 1063 : 1997 (2 Revision) |
Automotive vehicles - Ml4 x 1.25 spark plugs with flat seating and their cylinder head housing - Specification (Second Revision) | 1 | Mar, 2022 | Download | |
| 33 | IS 10651 : 2019 (1 Revision) |
Hub axle, front for moped - Specification (First Revision) | 0 | ---- | Download | |
| 34 | IS 10652 : 2019 (1 Revision) |
Pedal assembly for moped - Specification (First Revision) | 0 | ---- | Download | |
| 35 | IS 10653 : 2019 (1 Revision) |
Hub axle, rear, for moped - Specification (First Revision) | 0 | ---- | Download | |
| 36 | IS 10694 : Part 1 : 2009 (2 Revision) |
Automotive vehicles - Rims - General requirements: Part 1 nomenclature, designation, marking and measurement (First Revision) | 1 | Mar, 2017 | Download | |
| 37 | IS 10694 : Part 2 : 2009 (2 Revision) |
Automotive vehicles - Rims - General requirements: Part 2 passenger car (Second Revision) | 0 | Jul, 2019 | Download | |
| 38 | IS 10694 : Part 3 : 2009 (2 Revision) |
Automotive vehicles - Rims - General requirements: Part 3 commercial vehicle rims (Second Revision) | 0 | Jul, 2019 | Download | |
| 39 | IS 10694 : Part 4 : 1983 |
General requirements for rims for automotive vehicles: Part 4 scooter and scooter derivative rims | 0 | Jul, 2019 | Download | |
| 40 | IS 10694 : Part 5 : 1987 (1 Revision) |
General requirements for rims for automotive vehicles: Part 5 moped, motorcycle and motorcycle derivative rims (First Revision) | 0 | Jul, 2019 | Download | |
| 41 | IS 10694 : Part 6 : 2009 (2 Revision) |
Automotivevehicles - Rims - Generalrequirements: Part 6 rims for agricultural tractors,tillers and implements (Second Revision) | 0 | Jul, 2019 | Download | |
| 42 | IS 10694 : Part 7 : 1983 |
General requirements for rims for automotive vehicles: Part 7 industrial truck rims | 0 | Apr, 2023 | Download | |
| 43 | IS 10694 : Part 8 : 2009 (1 Revision) |
Automotive vehicles - Rims - General requirements: Part 8 earthmoving machine rims (First Revision) | 0 | Jul, 2019 | Download | |
| 44 | IS 10752 : 1983 |
Dimensions and testing requirements of landing gear for mounting on semitrailers | 0 | Jan, 2019 | Download | |
| 45 | IS 10766 : 2018/ISO 3842: 2006 (2 Revision) |
Road vehicles - Fifth wheels - Interchangeability (Second Revision) | 0 | ---- | Buy | |
| 46 | IS 10791 : 1983 |
Specification for control cable assembly for mopeds | 0 | Nov, 2023 | Download | |
| 47 | IS 10792 : 1984 |
Testing and acceptance criteria of pneumatic coupling between tractors and trailers | 0 | Jul, 2019 | Download | |
| 48 | IS 10876 : 1984 |
Specification for buckles for laminated springs for railway rocling stock | 0 | Mar, 2024 | Download | |
| 49 | IS 10878 : Part 1 : 1984 |
Specification for flat form springs: Part 1 design and calculation for springs made from rectangular cold - Rolled strips | 0 | Mar, 2024 | Download | |
| 50 | IS 10878 : Part 2 : 1984 |
Flat - Form springs: Part 2 speciFication for springs made from rectangular cold - Rolled strips | 0 | Mar, 2024 | Download | |
| 51 | IS 10881 : 1994 (1 Revision) |
Automotive vehicles - Mopeds, scooters and motorcycles method of evaluation of fuel consumption (First Revision) | 0 | Jul, 2019 | Download | |
| 52 | IS 11028 : 1984 |
Specification for handle bars for mopeds | 0 | Feb, 2017 | Download | |
| 53 | IS 11029 : 1984 |
Specification for steering ball races for mopeds | 0 | Jul, 2019 | Download | |
| 54 | IS 11030 : 1984 |
Specification for moped seat pillars | 0 | Feb, 2017 | Download | |
| 55 | IS 11086 : 2013 (1 Revision) |
Speedometer/odometer systems for automotive application - Specification (First Revision) | 0 | Sep, 2018 | Download | |
| 56 | IS 11098 : 1992 (1 Revision) |
Automotive vehicles - Steering column mounted combination switches - Specification (First Revision) | 1 | Dec, 2022 | Download | |
| 57 | IS 11139 : 2019 (1 Revision) |
Adjusters for control cables for moped - Specification (First Revision) | 0 | ---- | Download | |
| 58 | IS 11140 : 1984 |
Specification for footrest assembly for mopeds | 0 | Feb, 2017 | Download | |
| 59 | IS 11170 : 1985 |
Specification for 1 performance requirements for constant speed compression ignition (Diesel) engines for agricultural purposes (Up To 20 KW) | 5 | Jul, 2021 | Buy | |
| 60 | IS 1135 : 2018 (6 Revision) |
Springs - Leaf springs assembly for automobiles - Specification (Sixth Revision) | 0 | ---- | Download | |
| 61 | IS 11422 : 2001 (1 Revision) |
Terms and definitions of weights of two wheeled motor vehicles (First Revision) | 0 | Aug, 2022 | Download | |
| 62 | IS 11432 : 2002 (1 Revision) |
Terms and definitions of dimensions of two wheeled motor vehicles (First Revision) | 0 | Aug, 2022 | Download | |
| 63 | IS 11479 : Part 1 : 2021/ISO 9241-171 : 2008 (2 Revision) |
ANTIBACTERIAL TOILET SOAP - SPECIFICATION PART 1 SOLID CAKE (SECOND REVISION OF IS 11479) | 0 | ---- | Buy | |
| 64 | IS 11509 : PART 1 : 2012/ISO 4548-1:1997 (1 Revision) |
Methods of test for full - Flow lubricating oil filters for internal combustion engines: Part 1 differential pressure/flow characteristics (First Revision) | 0 | Dec, 2017 | Buy | |
| 65 | IS 11509 : PART 2 : 2012/ISO 4548-2:1997 (1 Revision) |
Methods of test for full - Flow lubricating oil filters for internal combustion engines: Part 2 element by - Pass valve characteristics (First Revision) | 0 | Dec, 2017 | Buy | |
| 66 | IS 11509 : PART 3 : 2012/ISO 4548-3:1997 (1 Revision) |
Methods of test for full - Flow lubricating oil filters for internal combustion engines: Part 3 resistance to high differential pressure and to elevated temperature (First Revision) | 0 | Dec, 2017 | Buy | |
| 67 | IS 11678 : 2021 (1 Revision) |
Textile Dyestuffs - Method for Determination of Strength of Indigo on Dyed Textiles (First Revision) | 0 | ---- | Download | |
| 68 | IS 11683 : 1986 |
Methods of test for industrial tractors | 0 | Feb, 2022 | Download | |
| 69 | IS 11739 : 1986 |
Method of recording dust ingress in automotive vehicles | 0 | Mar, 2021 | Download | |
| 70 | IS 11757 : 1986 |
General requirements and acceptance criteria for forklift trucks with capacity from 10000 kg to 50000 kg | 0 | Feb, 2022 | Download | |
| 71 | IS 11825 : 1986 |
Method of weighment of automotive vehicles | 0 | Mar, 2021 | Download | |
| 72 | IS 11827 : 2008 (2 Revision) |
Automotive vehicles - Calibration of speedometer - Method of evaluation (Second Revision) | 3 | Nov, 2023 | Download | |
| 73 | IS 11838 : 1986 |
Recommendations for measurement of quality characteristics of gudgeon pins | 1 | Jul, 2021 | Download | |
| 74 | IS 11839 : 1986 |
Procedure for splash proof testing of automotive vehicles | 0 | Mar, 2021 | Download | |
| 75 | IS 11849 : 1986 |
Method of determination of centre of gravity of automotive vehicles | 1 | Mar, 2017 | Download | |
| 76 | IS 11850 : 1998 (1 Revision) |
Automotive vehicles - Odometer systems - Method of evaluation (First Revision) | 1 | Mar, 2021 | Download | |
| 77 | IS 11851 : 1986 |
Method of evaluation of acceleration of automotive vehicle | 1 | Mar, 2017 | Download | |
| 78 | IS 11852 : 2019 (3 Revision) |
Automotive vehicles - Uniform provisions concerning the approval of vehicles of categories m2, m3, N and t with regard to braking (Third Revision) | 2 | May, 2024 | Download | |
| 79 | IS 11865 : 2006 (1 Revision) |
Automotive vehicles - Method of conducting waterproofing test (First Revision) | 0 | Aug, 2022 | Download | |
| 80 | IS 11877 : 2019 (1 Revision) |
Automotive Vehicles — Maximum Speed of Automotive Vehicles — Method of Evaluation ( First Revision ) | 0 | May, 2024 | Download | |
| 81 | IS 11891 : 2022/62281 (1 Revision) |
LUBRICATION AND OIL SEAL SYSTEM FOR DYNAMIC COMPRESSORS-SPECIFICATION (First Revision) | 0 | ---- | Buy | |
| 82 | IS 11921 : 2020 (2 Revision) |
Automotive Vehicles — Method of Evaluation of Constant Speed Fuel Consumption ( Second Revision ) | 0 | ---- | Download | |
| 83 | IS 11939 : 1996 (1 Revision) |
Automotive vehicles - Steering control systems - Impact protection requirements and methods of measurement (First Revision) | 1 | Mar, 2017 | Download | |
| 84 | IS 11948 : 2010 (2 Revision) |
Automotive vehicles - Steering effort - Method of evaluation (Second Revision) | 2 | Sep, 2022 | Download | |
| 85 | IS 11965 : 2022/ ISO 9241-210:2019 (1 Revision) |
Guide for storage of Round - Headed Cabbage (First Revision) | 0 | ---- | Buy | |
| 86 | IS 11977 : 2022/ ISO 9241-410 : 2008 (1 Revision) |
Guide for ripening of Bananas (First Revision) | 0 | ---- | Buy | |
| 87 | IS 12009 : 1995 (1 Revision) |
Automotive vehicle - Safety requirements for side door of passenger cars - Recommendations (First Revision) | 1 | Dec, 2020 | Download | |
| 88 | IS 12025 : 1987 |
Recommendations for measurement of quality characteristics for pistons | 1 | Dec, 2017 | Download | |
| 89 | IS 12056 : 1987 |
Recommendations for safety requirements for fuel tank assembly of automotive vehicles | 3 | Mar, 2019 | Download | |
| 90 | IS 12098 : 1987 |
Specification for rim wheels for pneumatic tyres for animal drawn vehicles | 0 | Jul, 2019 | Download | |
| 91 | IS 12105 : 2014 (1 Revision) |
Methods of test for valves of automotive air brake systems | 0 | Jul, 2019 | Download | |
| 92 | IS 12157 : 1987 |
Requirements for construction of work platform of powered industrial trucks (For Maintenance Purposes) | 0 | Feb, 2022 | Download | |
| 93 | IS 12159 : 2018 (2 Revision) |
Method of evaluation of accuracy of parameters of steering geometry of automotive vehicles (Second Revision) | 0 | Jan, 2023 | Download | |
| 94 | IS/ISO 12161 : 2006/ISO 12161: 2006 |
Road Vehicles - Endurance Braking Systems of Motor Vehicles and Towed Vehicles - Test Procedures | 0 | Mar, 2021 | Buy | |
| 95 | IS 12218 : 2018 (1 Revision) |
Method of measurement of approach, departure and ramp angles of automotive vehicles (First Revision) | 0 | May, 2024 | Download | |
| 96 | IS 12222 : 2011 |
Automotive vehicles - Turning circle and maneuverability requirements (First Revision) | 2 | Sep, 2022 | Download | |
| 97 | IS 12351 : 1988 |
Specification for coupling ball for caravans and light trailers | 0 | Jan, 2019 | Buy | |
| 98 | IS 12352 : 1988 |
Specification for fuel injection pump mounting bolts | 0 | Sep, 2019 | Download | |
| 99 | IS 12358 : 1988 |
Specification for `Contact' Type Coupling for Vacuum and Pressure Systems Connection Between Tractor and Trailer | 0 | Jan, 2019 | Download | |
| 100 | IS 12404 : 1988 |
Specification for couplings for driving fuel injection pumps | 0 | Sep, 2019 | Download | |
| 101 | IS 12455 : 1988 |
Performance requirements of aircooled spark ignition automotive engines | 0 | Sep, 2019 | Download | |
| 102 | IS 12460 : 1988 |
Automotive vehicles - Transmission systems - Manual control sequence in automatic transmissions - Recommendations | 1 | Sep, 2019 | Download | |
| 103 | IS 12499 : 1988 |
Specification for two stage, 0.5 litre diesel fuel filters | 0 | Sep, 2019 | Download | |
| 104 | IS 12500 : 1988 |
Specification for 0.2 litre diesel fuel filters | 0 | Sep, 2019 | Download | |
| 105 | IS 12508 : 2013 (1 Revision) |
Electric Tachometer for Automotive Vehicles — Specification | 0 | Dec, 2018 | Download | |
| 106 | IS 12511 : Part 1 : 2004 (1 Revision) |
Springs - Disc spring: Part 1 design calculation (First Revision) | 0 | Mar, 2019 | Download | |
| 107 | IS 12511 : Part 2 : 2004 (1 Revision) |
Springs - Disc spring: Part 2 specification (First Revision) | 0 | Mar, 2019 | Download | |
| 108 | IS 12535 : Part 1 : 1988 |
Automotive vehicles - Transmission systems - Glossary: Part 1 general definitions | 0 | Sep, 2019 | Download | |
| 109 | IS 12535 : Part 2 : 1991 |
Automotive vehicles - Transmission systems - Glonssary: Part 2 universal joints and driveshafts | 0 | Jul, 2021 | Download | |
| 110 | IS 12535 : Part 3 : 1991 |
Automotive vehicles - Transmission systems - Glossary: Part 3 drive axles definitions | 0 | Jul, 2021 | Download | |
| 111 | IS 12587 : 1989 |
Automotive vehicles - Transmission system - Gear arrangement - Recommendations | 0 | Sep, 2019 | Download | |
| 112 | IS 12588 : 2014 (1 Revision) |
Automotive vehicles - Oil and air assisted pressure gauges - Specification (First Revision) | 0 | Dec, 2019 | Download | |
| 113 | IS 12604 : 2004 (1 Revision) |
Road vehicles - Drawbar couplings - Interchangeability (First Revision) | 0 | Jul, 2019 | Buy | |
| 114 | IS 12605 : 2004/ISO 3853: 1994 (1 Revision) |
Road vehicles - Towing vehicle coupling device to tow caravans or light trailers - Mechanical strength test (First Revision) | 0 | Jul, 2019 | Buy | |
| 115 | IS 12606 : 1989 |
Transport tractors and trailers - Static load on ball couplings | 0 | Jul, 2019 | Download | |
| 116 | IS 12648 : 1989 |
Automotive vehicles - End mountings of shock absorbers - Dimensions and tests | 0 | Mar, 2019 | Download | |
| 117 | IS 12695 : 1989 |
Automotive vehicles -Three wheeled vehicles - Determination of centre of gravity | 0 | Jul, 2019 | Download | |
| 118 | IS 12726 : 2018/ISO 22915 -21: 2009 (1 Revision) |
Industrial trucks - Order - Picking trucks with operator position elevating above 1200 mm - Verification of stability (First Revision) | 0 | ---- | Buy | |
| 119 | IS 12750 : 1989 |
Automotive vehicles - Motorcycles and mopeds - Light alloy wheels methods of test and performance requirements | 0 | Mar, 2017 | Download | |
| 120 | IS 12793 : 2012 (1 Revision) |
Motorcycles - Measurement method for location of centre of gravity (First Revision) | 0 | Mar, 2021 | Download | |
| 121 | IS 12807 : 1989 |
Drawbar eyes for mechanical connections between towing vehicles and trailers - Specification | 0 | Jul, 2019 | Download | |
| 122 | IS 12821 : 2017 (1 Revision) |
Automotive vehicles - Braking system, tube connections - Dimensions (First Revision) | 0 | Aug, 2022 | Download | |
| 123 | IS 12831 : 1989 |
Automotive vehicles - Braking systems - Banjo bolt connections dimensions | 0 | Mar, 2021 | Download | |
| 124 | IS 12832 : 2010 (1 Revision) |
Automotive vehicles - Interior noise - Method of measurement and requirements (First Revision) | 1 | Mar, 2021 | Download | |
| 125 | IS 12869 : Part 1 : 2022/ISO 12614-2:2021 (2 Revision) |
Methods for determination of viscosity and viscometric fixed points of glass Part 1 Standard test methods (First Revision) | 0 | ---- | Buy | |
| 126 | IS 12869 : Part 2 : 2022/ISO 12614-3:2021 (2 Revision) |
Methods for determination of viscosity and viscometric fixed points of glass Part 2 Determination of softening point (First Revision) | 0 | ---- | Buy | |
| 127 | IS 12884 : 2015 (1 Revision) |
Automotive vehicles - Braking systems, rubber boots for brake wheel cylinders - Performance requirements (First Revision) | 0 | Jan, 2020 | Download | |
| 128 | IS 12902 : 1990/ISO 7646:1986 |
Commercial vehicles and buses - Gearbox flanges - Type A | 0 | Jul, 2021 | Buy | |
| 129 | IS 12903 : 1990/ISO 7647:1986 |
Commercial vehicles and buses - Gearbox flanges - Type S | 0 | Jul, 2021 | Buy | |
| 130 | IS 12904 : 1990/ISO 7648:1987 |
Flywheel housings for reciprocating internal combustion engines - Nominal dimensions and tolerances | 0 | Jul, 2021 | Buy | |
| 131 | IS 12905 : 1990/ISO 7653:1985 |
Commercial Vehicles-couplings Between Power Take-offs (PTO's) and Ancillary Driven Units | 0 | Jul, 2021 | Buy | |
| 132 | IS 12972 : 1990/ISO 7707:1986 |
Commercial road vehicles - Connections for rear - Mounted power take - Offs (PTO) | 0 | Jul, 2021 | Buy | |
| 133 | IS 12973 : 1990/ISO 7804:1985 |
Commercial road vehicles - Side openings for truck power take - Offs (PTO) | 0 | Jul, 2021 | Buy | |
| 134 | IS 12978 : 2006/ISO 8667:1992 (1 Revision) |
Commercial vehicles and buses - Cross - Tooth gearbox flanges, type T (First Revision) | 0 | Nov, 2020 | Buy | |
| 135 | IS 12996 : 1990 |
Internal combustion engines radiator pressure caps - Specification | 0 | Sep, 2019 | Download | |
| 136 | IS 13016 : 1991 |
Internal combustion engines - Radiator drain cocks - Specification | 0 | Nov, 2020 | Download | |
| 137 | IS 13018 : 1990 |
Internal combustion of test for pressure engines - Method charged engines | 0 | Sep, 2019 | Download | |
| 138 | IS 13029 : 1991 |
Internal combustionengines - setting ignition timing in spark ignition engines - Code of practice | 0 | Nov, 2020 | Download | |
| 139 | IS 13050 : 1991 |
Internal combustion engines - Valve seat inserts - Specification | 0 | Nov, 2020 | Download | |
| 140 | IS 13051 : 1991 |
Internal combustion engines radiator fans - Specification | 0 | Nov, 2020 | Download | |
| 141 | IS 13052 : 1991 |
Internal combustion engines - Cylinder liners - Quality characteristics | 0 | Nov, 2020 | Download | |
| 142 | IS 13090 : 2018 |
Automotive vehicles - Commercial vehicles - Clutch housings - Dimensions (First Revision) | 0 | ---- | Buy | |
| 143 | IS 13098 : 2012 |
Automotive vehicles - Tubes for pneumatic tyres - Specification (First Revision) | 0 | May, 2017 | Download | |
| 144 | IS 13111 : 1991 |
Automotive vehicles garage equipments - Terms and definitions | 0 | Feb, 2017 | Download | |
| 145 | IS 13135 : 2016/ISO 4082:1981 |
Road vehicles - Motor vehicles - Flasher units (First Revision) | 0 | Nov, 2021 | Buy | |
| 146 | IS 13154 : 2015 (1 Revision) |
Automotive vehicles - Tyres for agricultural vehicles and their trailers - Specification (First Revision) | 0 | Sep, 2020 | Download | |
| 147 | IS 13196 : 1991 |
Automotive vehicles - Light alloy wheels for motorcycles - Specification | 0 | Mar, 2017 | Download | |
| 148 | IS 13207 : 1991 |
Automotive vehicles - Hydraulic braking systems - Wheel cylinder performance requirements | 1 | Mar, 2021 | Download | |
| 149 | IS 13214 : Part 1 : 2020/ISO 7250-1 : 2008 (2 Revision) |
Basic Human Body Measurements for Technological Design Part 1 Body Measurement Definitions and Landmarks ( Second Revision ) | 0 | ---- | Buy | |
| 150 | IS 13214 : Part 3 : 2019/ISO 7250-3:2015 |
Basic human body measurements for technological design: Part 3 worldwide and regional design ranges for use in product standards | 0 | ---- | Buy | |
| 151 | IS 13224 : 1991 |
Automotive vehicles - Hydraulic braking systems - Master cylinder performance requirements | 1 | May, 2024 | Download | |
| 152 | IS 13225 : 1992 |
Automotive vehicles - hydraulic braking systems - Rubber cups - Specification | 3 | Mar, 2017 | Download | |
| 153 | IS 13226 : 1991 |
Automotive vehicles - Resistances in starter motorcircuits - Methods of measurement | 0 | Jul, 2021 | Download | |
| 154 | IS 13243 : 2014 (1 Revision) |
Automotive vehicles - Commercial vehicles - Attachments on hubs for wheels - Dimensions (First Revision) | 0 | Jan, 2019 | Download | |
| 155 | IS 13249 : 2014 (1 Revision) |
Automotive vehicles - Braking systems - Rubber seal for disc brake cylinder - Performance requirements (First Revision) | 0 | May, 2024 | Download | |
| 156 | IS 13284 : 1992 |
Automotive vehicles - Drawbar couplings and eyes for hinged drawbars - Method of test for strength | 0 | Jul, 2016 | Buy | |
| 157 | IS 13302 : Part 1 : 2018 (2 Revision) |
Industrial trucks - Verification of stability: Part 1 rough - Terrain trucks with mast (Second Revision) | 0 | ---- | Buy | |
| 158 | IS 13302 : Part 2 : 2018 |
Industrial trucks - Verification of stability: Part 2 rough - Terrain variable - Reach trucks (Second Revision) | 0 | ---- | Download | |
| 159 | IS 13313 : 1991 |
Automotive vehicles - Electrical wiring - Colour coding | 0 | Dec, 2022 | Download | |
| 160 | IS 13327 : 1992 |
Automotive vehicles - Anchorages for towing ropes, cables or bars - Specification | 0 | Jul, 2016 | Buy | |
| 161 | IS 13353 : 1992 |
Automotive vehicles - Garage equipments - Technical parameters | 0 | Jan, 2018 | Download | |
| 162 | IS 13360 : Part 4 : Sec 1 : SubSec 2 : 2018/ISO 16964: 2019 |
Plastics - Methods of Testing - Part 4 : Rheological Properties - Section 1 : Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics | 0 | ---- | Buy | |
| 163 | IS 13363 : 2017 (1 Revision) |
Automotive vehicles - Air brake systems - Performance requirements for drain valves (First Revision) | 0 | ---- | Download | |
| 164 | IS 13389 : 1992 |
Road vehicles - Passenger cars - Moving barrier rear collision test method | 0 | Sep, 2022 | Buy | |
| 165 | IS 13390 : 1992 |
Road vehicles - Frontal fixed barrier collision test method | 0 | Sep, 2022 | Buy | |
| 166 | IS 13391 : 2007/ISO 6813: 1998 (1 Revision) |
Road vehicles - Collision classification - Terminology (First Revision) | 0 | Sep, 2022 | Buy | |
| 167 | IS 13444 : 1992 |
Animal drawn vehicles - Pneumatic tyres - Specification | 0 | Jan, 2018 | Download | |
| 168 | IS 13453 : 1994 (1 Revision) |
Automotive vehicles - Braking systems - Method of test on brake dynamometer for two and three wheelers (First Revision) | 1 | Jul, 2019 | Download | |
| 169 | IS 13460 : 2005 (1 Revision) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 12 s (Supplementary) for vehicles with 12 V nominal supply voltage (First Revision) | 0 | Jan, 2021 | Buy | |
| 170 | IS 13461 : 2005 (1 Revision) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 12 N (Normal) for vehicles with 12 V nominal supply voltage (First Revision) | 0 | Jan, 2021 | Buy | |
| 171 | IS 13476 : 2006 (1 Revision) |
Automotive vehicles - Mechanical steering gear - Methods of test (First Revision) | 0 | Sep, 2022 | Download | |
| 172 | IS 13491 : 2005 (1 Revision) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 24 N (Normal) for vehicles with 24 V nominal supply voltage (First Revision) | 0 | Jan, 2021 | Buy | |
| 173 | IS 13492 : 1992 |
Automotive vehicles - Two wheelers - Method of evaluation of brake pedal strength requirements | 1 | Jul, 2019 | Download | |
| 174 | IS 13499 : 2005/ISO 3731:2003 (1 Revision) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 24 S (Supplementary) for vehicles with 24 V nominal supply voltage (First Revision) | 0 | Jan, 2021 | Buy | |
| 175 | IS 1350 : Part 2 : 2022 (3 Revision) |
Method of test for coal and coke : Part 2 determination of gross calorific value (Third Revision) | 0 | ---- | Download | |
| 176 | IS 1350 : Part 3 : 2022/ISO 18885-1:2017 (2 Revision) |
Methods of test for coal and coke : Part 3 determination of total sulphur - Eschka method (Second Revision) | 0 | ---- | Buy | |
| 177 | IS 13506 : 2013 (1 Revision) |
Automotive vehicles - Method of test for articulation (First Revision) | 1 | Oct, 2023 | Download | |
| 178 | IS 13509 : 1992 |
Automotive vehicles - Towing vehicles - Mounting of electrical connections on rear cross members | 0 | Dec, 2022 | Download | |
| 179 | IS 13531 : 2005 (1 Revision) |
Automotive tyres - Tyre - Retreading materials for mould cure process (First Revision) | 0 | Jul, 2019 | Download | |
| 180 | IS 13544 : 1992 |
Trailers - Mounting of ball bearing turn table - Dimensions | 0 | Mar, 2018 | Download | |
| 181 | IS 13579 : 1992 |
Transport trailers - Methods of test | 0 | Jan, 2023 | Download | |
| 182 | IS 13599 : 2014 (1 Revision) |
Automotive vehicles - Instrument systems - Temperature gauges - Electrical andElectronic type - Specification (First Revision) | 0 | May, 2019 | Download | |
| 183 | IS 13602 : 2013 (1 Revision) |
Automotive vehicles - Instrument systems - Temperature gauges mechanical types - Specification (First Revision) | 0 | Sep, 2018 | Download | |
| 184 | IS 13603 : 2014 (1 Revision) |
Automotive vehicles - Air brake systems - Performance requirements for brake chamber (First Revision) | 0 | Jan, 2019 | Download | |
| 185 | IS 13604 : 2014 (1 Revision) |
Automotive vehicles - Air brake systems - Performance requirements for dual brake valve (First Revision) | 0 | Jan, 2019 | Download | |
| 186 | IS 13646 : 2018 (1 Revision) |
Automotive vehicles ? Instrument systems - Pressure gauges electrical / electronic type ? specification (First Revision) | 0 | ---- | Download | |
| 187 | IS 13654 : 1993 |
Automotive vehicles - Instrument systems - Electrical speedometer performance requirements | 1 | Feb, 2019 | Download | |
| 188 | IS 13686 : 1993 |
Internal combustion engines radiators - Methods of test | 0 | Jan, 2019 | Download | |
| 189 | IS 13687 : 1993 |
Internal combustion engines - Radiators - Heat dissipation performance - Method of test | 0 | Jan, 2019 | Download | |
| 190 | IS 13749 : 2009 (1 Revision) |
Automotive vehicles - Procedure for determining the "H" point and the torso angle for 50th percentile adult male in seating positions of motor vehicles | 0 | Sep, 2019 | Download | |
| 191 | IS 13824 : 1993 |
Internal combustion engines - Method of verification of emission of crankcase gases for vehicles powered with four stroke spark ignition engines | 0 | Jan, 2019 | Download | |
| 192 | IS 13931 : Part 1 : 1993 |
Automotive vehicles - Stoplight switches: Part 1 specification | 0 | Feb, 2019 | Download | |
| 193 | IS 13931 : Part 2 : 1993 |
Automotive vehicles - stoplight switches: Part 2 methods of test | 1 | Feb, 2019 | Download | |
| 194 | IS 13941 : 1994 |
.automotivevehicles - Wheel fasteners andhubcaps - General requirements | 1 | Nov, 2023 | Download | |
| 195 | IS 13942 : Part 1 : 2019 |
Automotive Vehicles — External Projection Part 1 Performance Requirements for M1 Category of Vehicles ( First Revision ) | 1 | ---- | Download | |
| 196 | IS 13942 : Part 2 : 2020 |
Automotive Vehicles — External Projections Part 2 Performance Requirements for Vehicles of Categories Other than M1 ( First Revision ) | 1 | ---- | Download | |
| 197 | IS 13943 : 2017 (1 Revision) |
Automotive vehicles - Wheel guards for vehicles of m1 category - Performance (First Revision) | 1 | Nov, 2021 | Download | |
| 198 | IS 13971 : Part 1 : 1994 |
Rough terrain fork lift trucks - Code of practice for safety: Part 1 application, operation and maintenance | 0 | Jul, 2019 | Buy | |
| 199 | IS 13971 : Part 2 : 1994 |
Rough terrain fork lift trucks - Code of practice for safety: Part 2 general requirements | 0 | Jul, 2019 | Buy | |
| 200 | IS 13988 : 2014 (2 Revision) |
Automotive vehicles - Starting gradeability - Method of measurement and requirement (Second Revision) | 0 | Sep, 2019 | Download | |
| 201 | IS 14141 : 1994 |
Automotive vehicles - Electrical windshield washing systems - Performance requiremeNts | 0 | Jul, 2019 | Download | |
| 202 | IS 14210 : 1994 |
Automotive vehicles rear view mirrors - Specification | 0 | Mar, 2019 | Download | |
| 203 | IS 14221 : 1995 |
Automotive vehicles retro - Reflective sheets and tapes - Specification | 0 | Jan, 2021 | Download | |
| 204 | IS 14224 : 1995 |
Automotive vehicles - Registration plate - Requirements | 0 | Jan, 2020 | Download | |
| 205 | IS 14225 : 2017 (1 Revision) |
Automotive vehicles - Locking systems and door retention components - General requirements (First Revision) | 1 | Mar, 2019 | Download | |
| 206 | IS 14226 : 1995 |
Automotive vehicles - Hood latch system i - Method of test | 1 | Nov, 2023 | Download | |
| 207 | IS 14247 : 1995 |
Automotive vehicles - Exterior protection for passenger car performance requirements | 0 | Mar, 2019 | Buy | |
| 208 | IS 14272 : 2011 (1 Revision) |
AUTOMOTIVE VEHICLES — TYPES — TERMINOLOGY ( First Revision ) | 4 | Jan, 2020 | Download | |
| 209 | IS 14272 : Part 1 : 1995 |
Automotive vehicles - Types - Terminology: Part 1 three and four wheelers | 0 | Jan, 2020 | Download | |
| 210 | IS 14273 : 1999 |
Automotive vehicles - Exhaust emissions - Gaseous pollutants from vehicles fitted with compression ignition engines - Method of measurement | 0 | Jan, 2019 | Download | |
| 211 | IS 14283 : 1995 |
Automotive vehicles - Accelerator control systems - Safety requirements | 0 | Mar, 2021 | Download | |
| 212 | IS 14346 : Part 1 : 1996 |
Automotive Vehicles - Passenger Cars - Verification of Drivers Direct Field of View - Part 1 : Vehicle Positioning for Static Measurement | 0 | Mar, 2017 | Download | |
| 213 | IS 14346 : Part 2 : 1996 |
Automotive vehicles - Passenger cars verification of drivers direct field of view (Part 2) Method of test | 0 | Mar, 2017 | Download | |
| 214 | IS 14380 : 1996 |
Automotive vehicles - Ignition coils for magneto ignition systems - Specification | 1 | Jul, 2021 | Download | |
| 215 | IS 14381 : 1996 |
Automotive vehicles - Electrical circuits - Recommended graphical symbols | 0 | Jul, 2021 | Download | |
| 216 | IS 14382 : 2014 (1 Revision) |
Automotive vehicles - Speed limitation devices - Specification (First Revision) | 0 | Sep, 2019 | Download | |
| 217 | IS 14413 : 1996 |
Automotive vehicles - Telltale symbols and controls on two - Wheeled and threewheeled vehicles | 1 | Feb, 2017 | Download | |
| 218 | IS 14495 : 1998 |
Automotive vehicles - Pillion hand - Holds for two - Wheeled vehicles - Requirements | 0 | Jan, 2018 | Download | |
| 219 | IS 14511 : Part 1 : 2007/ISO 8984-1:1993 (1 Revision) |
Diesel engines - Testing of fuel injectors: Part 1 hand - Lever - Operated testing and setting apparatus (First Revision) | 0 | Dec, 2017 | Buy | |
| 220 | IS 14511 : Part 2 : 2007/ISO 8984-2:1993 (1 Revision) |
Diesel engines - Testing of fuel injectors: Part 2 test methods (First Revision) | 0 | Dec, 2017 | Buy | |
| 221 | IS 14553 : 2008 (1 Revision) |
Automotive vehicles - Apparatus for the measurement of opacity (Smoke) of exhaust gas from vehicles equipped with compression ignition engines - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 222 | IS 14554 : 1998 |
Automotive vehicles - Exhaustemissions - Apparatus for the measurement of carbon monoxide concentration from vehicles equipped with spark ignition engines at idling - Specification | 0 | Dec, 2017 | Download | |
| 223 | IS 14557 : 1998 |
Automotive vehicles - Cooling performance - Method of measurement | 1 | Mar, 2021 | Download | |
| 224 | IS 14599 : 1999 |
Automotive vehicles - Performance requirements (Measurement Of Power, SFC, Opacity) of positive and compression ignition engines - Method of test | 0 | Sep, 2019 | Download | |
| 225 | IS 14600 : 1999 |
Automotive vehicles - Exhaust emissions - Gaseous pollutants from vehicles equipped with internal combustion engines - Method of measurement | 0 | Sep, 2019 | Download | |
| 226 | IS 14610 : 1999 |
Automotivevehicles - Fuel consumptiononchassis dynamometer - Methodof measurement | 0 | Jun, 2018 | Download | |
| 227 | IS 14664 : 2010 (1 Revision) |
Automotive vehicles - Performance requirements and testing procedure for braking system of two and three wheeled motor vehicles (First Revision) | 5 | Mar, 2021 | Download | |
| 228 | IS 14682 : 2004 (1 Revision) |
Automotive vehicles - Lateral protection (Side Guards) - Technical requirements (First Revision) | 1 | Sep, 2022 | Download | |
| 229 | IS 14770 : 1999 |
Industrial trucks - Inspection and repair of fork arms in service on fork - Lift trucks | 0 | Jul, 2019 | Buy | |
| 230 | IS 14771 : 2018 (1 Revision) |
Truck and bus tyres - Methods of measuring tyre rolling circumference - Loaded new tyres (First Revision) | 0 | Apr, 2023 | Download | |
| 231 | IS 14785 : 2000 |
Automotive vehicles - - Determination of road - Load constants by coast down test method | 0 | Mar, 2021 | Download | |
| 232 | IS 14813 : 2000 |
Automotive vehicles - Air horns - Specification | 1 | Jan, 2021 | Download | |
| 233 | IS/ISO 14851 : 2022/ISO 12614-4:2021 (2 Revision) |
Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Measuring the Oxygen Demand in A Closed respirometer First Revision | 0 | ---- | Buy | |
| 234 | IS 14880 : 2000/NULL |
Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Strength tests | 0 | Feb, 2022 | Buy | |
| 235 | IS 14902 : Part 1 : 2022/ISO 12614-7:2021 (3 Revision) |
Performance of high-voltage direct current HVDC systems with linecommutated converters : Part 1 Steady-state conditions second revision | 0 | ---- | Buy | |
| 236 | IS 14945 : 2001 |
Counter balanced trucks handling freight containers of 6 m length and above - Additional stability tests | 0 | Jul, 2021 | Download | |
| 237 | IS/ISO 14960 : Part 2 : 2014/ISO 14960 : Part 2 : 2014 |
Tubeless tyres - Valves and components: Part 2 clamp - In tubeless tyre valve - Test method | 0 | Jul, 2019 | Buy | |
| 238 | IS 15061 : 2002 |
Automotive vehicles - Flammability requirements | 1 | Feb, 2022 | Download | |
| 239 | IS 15101 : 2002 |
Transport tractors and trailers fifth wheel couplings - Strength tests | 0 | Jul, 2021 | Buy | |
| 240 | IS 15139 : 2002 |
Automotive vehicles - Safety belt anchorages - Specification | 2 | Sep, 2022 | Download | |
| 241 | IS 15223 : 2016 (1 Revision) |
Automotive vehicles - Interior fittings - Specification (First Revision) | 0 | Sep, 2022 | Download | |
| 242 | IS 15350 : 2017 (1 Revision) |
Automotive vehicles - Ignition systems - Methods of test | 0 | May, 2022 | Download | |
| 243 | IS 15364 : 2003 |
Automotive vehicles - Spark - Plugs M10 x 1 with flat seating | 0 | Feb, 2019 | Download | |
| 244 | IS 1543 : 1964 |
Specification for single cylinder fuel injection pumps (Revised) | 1 | Mar, 2023 | Download | |
| 245 | IS 15453 : 2004 |
Spring - Tors1on bar springs - Specification | 0 | Mar, 2019 | Download | |
| 246 | IS 15487 : 2004 |
Industrial trucks - Specification for indicator lights for container handling and grappler arm operations | 0 | Jul, 2019 | Buy | |
| 247 | IS 15488 : 2004 |
Powered industrial trucks - Safety signs and hazard pictorials - General principles | 0 | Jul, 2019 | Buy | |
| 248 | IS 15514 : 2018 (1 Revision) |
Industrial trucks - Verification of stability - Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices (First Revision) | 0 | ---- | Buy | |
| 249 | IS 15515 : 2004 |
Industrial variable - Reach trucks - Additional stability tests for trucks handling freight containers of length 6 m and above | 0 | Jul, 2019 | Buy | |
| 250 | IS 15516 : 2004 |
Industrial variable - Reach trucks - Stability test | 0 | Jul, 2019 | Buy | |
| 251 | IS 15523 : 2018 (1 Revision) |
Automotive tyres - Precured patches for repairing cross ply/ radial tyres and inner tubes - Specification (First Revision) | 0 | ---- | Download | |
| 252 | IS 15524 : 2018 (1 Revision) |
Automotive vehicles - Retreading of tyres by the pre - Cured process - Specification (First Revision) | 0 | ---- | Download | |
| 253 | IS 15543 : 2005 |
Selection of prime movers for trailers - Guidelines | 0 | Jul, 2019 | Download | |
| 254 | IS 15546 : 2005 |
Automotive vehicles - Seats, their anchorages and head restraints or category M1- Specification | 1 | Sep, 2019 | Download | |
| 255 | IS 15547 : 2005 |
Automotive vehicles - Plastic fuel tank for four wheelers | 2 | Mar, 2019 | Download | |
| 256 | IS 15563 : 2005 |
Passenger car tyres - Methods for measuring rolling circumFerence - Loaded new tyres | 0 | Jul, 2019 | Download | |
| 257 | IS 15611 : Part 1 : 2018/ISO 22915-5: 2014 (1 Revision) |
Industrial trucks - Single - Side - Loading trucks - Verification of stability (First Revision) | 0 | ---- | Buy | |
| 258 | IS 15611 : Part 2 : 2005/ISO 13563-2: 2001 |
Single side loading fork - Lift trucks: Part 2 additional stability test for trucks handling freight container of 6 M length and above | 0 | Jul, 2019 | Buy | |
| 259 | IS 15634 : 2006 |
Fork - Lift trucks - Fork - Arm extensions and telescopic fork - Arms - Technical characteristics and strength requirement | 0 | Mar, 2021 | Download | |
| 260 | IS 15640 : 2006 |
BI - Directional and multi - Directional fork - Lift trucks - Stability tests | 0 | Mar, 2021 | Buy | |
| 261 | IS 15645 : 2014 (1 Revision) |
Road vehicles - Light alloy wheels - Impact test (First? Revision) | 0 | Dec, 2019 | Download | |
| 262 | IS 15702 : 2006 |
Automotive vehicles - Air brake hose - Specification | 0 | Aug, 2022 | Download | |
| 263 | IS 15704 : 2018 (1 Revision) |
Automotive vehicles - Retreaded pneumatic tyres for commercial vehicles - Specification (First Revision) | 0 | Dec, 2023 | Download | |
| 264 | IS 15708 : 2006 |
Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies | 0 | Dec, 2022 | Download | |
| 265 | IS 15709 : 2018 (1 Revision) |
Automotive vehicles - Retreaded pneumatic tyres for passenger car - Specification (First Revision) | 0 | ---- | Download | |
| 266 | IS 15724 : 2006 |
Automotive tyres - Retreading procedure - Hot process | 0 | Mar, 2017 | Download | |
| 267 | IS 15725 : 2006 |
Automotive tyres - Tyre curing envelop - Cold process | 0 | Dec, 2023 | Download | |
| 268 | IS 15730 : 2006 |
AC flashers for 2 and 3 wheelers | 0 | Jul, 2021 | Download | |
| 269 | IS 15731 : 2018 (1 Revision) |
Automotive tyres - Selection and inspection of retreadable tyre casing (First Revision) | 0 | Dec, 2023 | Download | |
| 270 | IS 15753 : 2007 |
Automotive tyres - Tyre curing bladder - Cold process | 0 | Dec, 2023 | Download | |
| 271 | IS 15780 : 2007 |
Automotive tyres - Repair of tyres and tubes used on motor vehicles | 0 | Dec, 2023 | Download | |
| 272 | IS 15783 : 2008 |
Road vehicles - Brake control levers for two and three wheeled motor vehicles - Specification | 0 | Nov, 2023 | Download | |
| 273 | IS 15794 : 2007 |
Road hazard impact test for wheel and tyre assemblies (Passenger Cars, Light Trucks And Multipurpose Vehicles) | 0 | Jan, 2018 | Download | |
| 274 | IS 15796 : 2008 |
Automotive vehicles - Horn installation requirements | 3 | Feb, 2019 | Download | |
| 275 | IS 15802 : 2008 |
Automotive vehicles - Windscreen wiping system for 4 wheelers other than ml category of vehicles - Requirements | 1 | Feb, 2019 | Download | |
| 276 | IS 15804 : 2008 |
Automotive vehicles - Windscreen wiping and washing system for ml category of vehicles - Requirements | 2 | Feb, 2019 | Download | |
| 277 | IS 15832 : 2022/ISO 12614-9:2021 (2 Revision) |
Glossary of Technical Terms Related to Environmental | 0 | ---- | Buy | |
| 278 | IS 15886 : 2010 |
Road Vehicles — Battery Operated--Vehicles — Code Of Practice | 0 | Mar, 2017 | Download | |
| 279 | IS 15901 : 2010 |
Automotive Vehicles?bumper Fitment On--M1 Categoryof Vehicles?test Methods | 1 | Sep, 2019 | Download | |
| 280 | IS 15943 : 2012 |
Automotive vehicles - Hand - Holds for three, four and more than four wheeled motor vehicles - Specification | 1 | Jun, 2022 | Download | |
| 281 | IS 15945 : 2011 |
Tubeless tyres - Valves and components - Test methods | 0 | Apr, 2023 | Download | |
| 282 | IS 15986 : 2015 |
Automotive vehicles - Uniform provisions concerning the approval of vehicles of categories m1 and n1 with regard to braking | 1 | Apr, 2020 | Download | |
| 283 | IS 15996 : 2021/ISO 12097-2 (1 Revision) |
Information and documentation - Library performance indicators First Revision of IS 15996 | 0 | ---- | Buy | |
| 284 | IS 16025 : 2022/ ISO 24508 : 2019 (2 Revision) |
Cigarettes Determination of nicotine in total particulate matter from the mainstream smoke Gas-chromatographic method | 0 | ---- | Buy | |
| 285 | IS 16057 : 2013 |
Lpg operated internal combustion engines - Safety and performance requirements - Specification | 0 | Aug, 2018 | Download | |
| 286 | IS 1606 : 1979 (2 Revision) |
Specification for automobile lamps (Second Revision) | 3 | May, 2019 | Download | |
| 287 | IS 16137 : Part 1 : 2014 |
Automotive vehicles - Methods of measurement of braking coefficient of road surfaces: Part 1 srtt method | 0 | Jan, 2019 | Download | |
| 288 | IS 16137 : Part 2 : 2014 |
Automotive vehicles - Methods of measurement of braking coefficient of road surfaces | 0 | Jan, 2019 | Download | |
| 289 | IS 16192 : Part 1 : 2014 |
Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 1 light alloy wheel rims - Method of tests and requirements | 2 | Jun, 2019 | Download | |
| 290 | IS 16192 : Part 2 : 2014 |
Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 2 sheet metal wheel rims - Method of tests and requirements | 1 | Jun, 2019 | Download | |
| 291 | IS 16192 : Part 3 : 2018 |
Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 3 Spoke Wheel Rims ---Method of tests and requirements | 1 | ---- | Download | |
| 292 | IS 16211 : 2015 |
Electromagnetic Radiation From Automotive Vehicle - Permissible Levels and Methods of Tests | 0 | Dec, 2020 | Download | |
| 293 | IS 16219 : 2014 |
Automotive vehicles - Metallic fuel tanks - Specification | 2 | Mar, 2019 | Download | |
| 294 | IS/ISO 16249 : 2013/ISO 16249 : 2013 |
Springs - Symbols | 0 | Dec, 2022 | Buy | |
| 295 | IS 16325 : 2019 |
Automotive vehicles ? windscreen wiping system for 3 wheeler vehicles ? specification | 0 | ---- | Download | |
| 296 | IS 16332 : 2017 |
Automotive vehicles - Strength of superstructure of large passenger vehicles | 0 | Feb, 2022 | Download | |
| 297 | IS 16367 : 2017 |
Road vehicles - Liquefied petroleum gas (LPG) specific equipment - Gas injector | 0 | ---- | Download | |
| 298 | IS 16490 : 2016 |
LED Destination Board System for Buses - Specification | 2 | Dec, 2020 | Download | |
| 299 | IS 16559 : 2019/ISO 7243 : 2017 (1 Revision) |
Ergonomics of the Thermal Environment — Assessment of Heat Stress Using the WBGT ( Wet Bulb Globe Temperature ) Index ( First Revision ) | 0 | ---- | Buy | |
| 300 | IS 16561 : Part 2 : 2017/ISO 11064-2 : 2000 |
Ergonomic design of control centres Part 2 Principles for the Arrangement of Control Suites | 0 | Nov, 2022 | Buy | |
| 301 | IS 16595 : Part 11 : 2020/ISO 9241-11 : 2018 |
Ergonomics of Human-System Interaction Part 11 Usability: Definitions and Concepts ( First Revision ) | 0 | ---- | Buy | |
| 302 | IS 16604 : 2017 |
Automotive vehicles - Arrangement of foot controls of vehicles - Specification | 1 | Jun, 2022 | Download | |
| 303 | IS 16694 : 2018 |
Automotive Vehicles- Safety Belts, Restraint Systems and Safety Belt Reminder- Installation Requirements | 1 | Sep, 2022 | Download | |
| 304 | IS 16712 : 2018 |
Automative vehicles - Spray suppression systems for two wheeled motor vehicles | 1 | Oct, 2023 | Download | |
| 305 | IS 16753 : Part 1 : 2022/ ISO 28803 : 2012 (1 Revision) |
High Efficiency Filters and Filter Media for removing Particles from Air Part 1 Classification Performance Testing and Marking First revision | 0 | ---- | Buy | |
| 306 | IS 16837 : 2018 |
Automotive vehicles - Interior fittings for other than m1 category of vehicles - Specification | 0 | Mar, 2022 | Download | |
| 307 | IS 17009 : 2018/ISO 11226 : 2000 |
Ergonomics - Evaluation of static working postures | 0 | ---- | Buy | |
| 308 | IS 17019 : 2018 |
Gear / gerotor oil pump for motorcycle / scooter / moped - Specification | 0 | ---- | Download | |
| 309 | IS 17030 : 2018/ISO 20685:2010 |
3 - D scanning methodologies for internationally compatible anthropometric databases | 0 | ---- | Buy | |
| 310 | IS 17030 : Part 2 : 2019/ISO 20685-2 : 2015 |
Ergonomics 3 - D scanning methodologies for internationally compatible anthropometric databases: Part 2 evaluation protocol of surface shape and repeatability of relative landmark positions | 0 | ---- | Buy | |
| 311 | IS 17031 : Part 1 : 2018/ISO 11228-1:2003 |
Ergonomics — Manual Handling Part 1 Lifting and Carrying | 0 | ---- | Buy | |
| 312 | IS 17031 : Part 2 : 2019/ISO 11228-2:2007 |
Ergonomics — Manual Handling Part 2 Pushing and Pulling | 0 | ---- | Buy | |
| 313 | IS 17031 : Part 3 : 2018/ISO 11228-3:2007 |
Ergonomics — Manual Handling Part 3 Handling of Low Loads at High Frequency | 0 | ---- | Buy | |
| 314 | IS 17033 : 2018/ISO/TR 12296:2012 |
Ergonomics - Manual handling of people in the healthcare sector | 0 | ---- | Buy | |
| 315 | IS 17102 : 2019/ISO 7731 : 2003 |
Ergonomics - Danger signals for public and work areas - Auditory danger signals | 0 | ---- | Buy | |
| 316 | IS 17103 : 2019/ISO 9886 : 2004 |
Ergonomics - Evaluation of thermal strain by physiological measurements | 0 | ---- | Buy | |
| 317 | IS 17104 : 2019/ISO 10551 : 1995 |
Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales | 0 | ---- | Buy | |
| 318 | IS 17105 : 2019/ISO 28802 : 2012 |
Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people | 0 | ---- | Buy | |
| 319 | IS 17113 : Part 3 : 2022/ISO 12614-12:2021 |
Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory | 0 | ---- | Buy | |
| 320 | IS 17128 : Part 1 : 2019 |
Automotive vehicles ? vehicle dynamics test methods: Part 1 general test conditions | 0 | May, 2024 | Download | |
| 321 | IS 17128 : Part 2 : 2019 |
Automotive Vehicles ― Vehicle Dynamics Test Methods Part 2 Steady-State Test Procedure for Vehicle Stability and Controllability — Open-Loop and Closed Loop Test | 0 | Jan, 2024 | Download | |
| 322 | IS 17132 : 2019 |
Guideline Specifications for Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven Vehicles and Their Trailers | 1 | ---- | Download | |
| 323 | IS 17191 : Part 1 : 2019 |
Electric Power Train Vehicles Part 1 Measurement of Electrical Energy Consumption | 0 | ---- | Download | |
| 324 | IS 17191 : Part 2 : 2019 |
Electric Power Train Vehicles Part 2 Method of Measuring the Range | 0 | ---- | Download | |
| 325 | IS 17191 : Part 3 : 2019 |
Electric Power Train Vehicles Part 3 Measurement of Net Power and the Maximum 30 Minute Power | 1 | ---- | Buy | |
| 326 | IS 17449 : 2022/ISO 12614-8:2021 (2 Revision) |
Monomeric MDI (MMDI) and polymeric MDI (PMDI ) - Specification (First Revision) | 0 | ---- | Buy | |
| 327 | IS 17458 : 2018/ISO 6826:1997 |
Reciprocating internal combustion engine - Fire protection | 0 | ---- | Buy | |
| 328 | IS 17536 : Part 4 : 2022/ISO 24505 : 2016 |
Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 4: Marine evacuation systems | 0 | ---- | Buy | |
| 329 | IS 17614 : 2021 |
Water quality Sampling Part 21 Guidance on Sampling of Drinking Water distributed by tankers or means other than distribution pipes | 0 | ---- | Download | |
| 330 | IS 17614 : Part 1 : 2021/ISO 10075-1 : 2017 |
WATER QUALITY - SAMPLING Part 1 Guidance on the design of sampling programmes and sampling techniques | 0 | ---- | Buy | |
| 331 | IS 17614 : Part 7 : 2021 |
WATER QUALITY - SAMPLING Part 7 Guidance on sampling of water and steam in boiler plants | 0 | ---- | Download | |
| 332 | IS 17614 : Part 25 : 2022/ ISO 9241-300:2008 |
Water Quality Sampling Part 25 for Microbiological Analysis | 0 | ---- | Buy | |
| 333 | IS 17646 : Part 4 : 2021 |
Preparation and quality management of fluids for haemodialysis and related therapies Part 4 Concentrates for haemodialysis and related therapies | 0 | ---- | Download | |
| 334 | IS 17650 : Part 1 : 2021/ ISO 9241-302:2008 |
Water efficient plumbing products - Requirements: Part 1 Sanitaryware | 0 | ---- | Buy | |
| 335 | IS 17653 : 2021/ISO 12405-4:2018 |
Solid biofuels - Determination of ash content | 0 | ---- | Buy | |
| 336 | IS 17661 : Part 2 : 2022/ ISO 9241-110:2020 |
Ships and marine technology Marine NOX Reduction Agent AUS 40 Part 2: Test Methods | 0 | ---- | Buy | |
| 337 | IS 17712 : Part 3 : 2021 |
Implants for surgery Cardiac pacemakers Part 3: Low-profile connectors IS-1 for implantable pacemakers | 0 | ---- | Download | |
| 338 | IS 17725 : 2022 |
PRECAST CONCRETE CIRCULAR MANHOLE SPECIFICATION | 0 | ---- | Download | |
| 339 | IS 17747 : 2021 |
Spices and Condiments — Nutmeg (Without Shell), Whole and Ground — Specification | 0 | ---- | Download | |
| 340 | IS 17801 : Part 1 : 2022/ISO 23273: 2013 |
Stationary training equipment: Part 1: General safety requirements and test methods | 0 | ---- | Buy | |
| 341 | IS 17803 : 2022/ISO 10075-3 : 2004 |
POTABLE WATER BOTTLES (COPPER, STAINLESS STEEL, ALUMINIUM) — SPECIFICATION | 0 | ---- | Buy | |
| 342 | IS 17869 : 2022/ISO 12614-14:2021 |
LOW-PRESSURE STEAM COOKER SPECIFICATION | 0 | ---- | Buy | |
| 343 | IS 17900 : Part 6 : 2022/ISO 12614-13:2021 |
Lifts for the Transport of Persons and Goods : Part 6 Guide for Maintenance of Lifts | 0 | ---- | Buy | |
| 344 | IS 17923 : 2022/ISO 12614-19:2021 |
Physical Activity, Sports and Injury Management - Guidelines for Safety in Educational Institutions and Community Sports Academies | 0 | ---- | Buy | |
| 345 | IS/ISO 18164 : 2005 |
Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance | 0 | Jul, 2019 | Download | |
| 346 | IS/ISO 18650 : Part 1 : 2021/ISO 12614-10:2021 (2 Revision) |
BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT CONCRETE MIXERS PART 1: COMMERCIAL SPECIFICATIONS | 0 | ---- | Buy | |
| 347 | IS 1884 : 1993 (3 Revision) |
Automotive vehicles - Electric horns - Specification (Third Revision) | 3 | Feb, 2019 | Download | |
| 348 | IS 1885 : Part 60 : 2022/ISO 18885-3:2021 (2 Revision) |
Electrotechnical Vocabulary: Part 60 Equipment for Explosive Atmospheres (Second Revision) | 0 | ---- | Buy | |
| 349 | IS/ISO/IEC 19752 : 2017/ISO 12614-11:2021 |
Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components | 0 | ---- | Buy | |
| 350 | IS/ISO/IEC 19798 : 2017/ISO 12614-17:2021 |
Information technology Office equipment Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer | 0 | ---- | Buy | |
| 351 | IS/ISO/IEC 19799 : 2007/ISO 12614-18:2021 |
Information technology Method of measuring gloss uniformity on printed pages | 0 | ---- | Buy | |
| 352 | IS/ISO 2030 : 2018/ ISO 9241-971:2020 (1 Revision) |
Granulated cork Size analysis by mechanical sieving | 0 | ---- | Buy | |
| 353 | IS/ISO 20562 : 2014 (1 Revision) |
Tyre valves - Iso core chambers no. 1, no. 2, no. 3 and no. 4 (First Revision) | 0 | Jul, 2017 | Download | |
| 354 | IS 2077 : 2014 (3 Revision) |
Automotive vehicles - Electric relays - Specification (Third Revision) | 0 | Jul, 2019 | Download | |
| 355 | IS 2081 : 1998 (2 Revision) |
Automotive vehicles - Taper terminal cable connectors for batteries - Specification (Second Revision) | 0 | Feb, 2019 | Download | |
| 356 | IS/ISO 2162 : Part 2 : 1993/ISO 2162: Part-2: 1993 |
Technical product documentation - Springs: Part 2 presentation of data for cylindrical helical compression springs | 0 | Mar, 2021 | Buy | |
| 357 | IS/ISO 22313 : 2020/ISO/TS 9241-411 : 2012 (1 Revision) |
Security and resilience Business continuity management systems Guidance on the use of ISO 22301 | 0 | ---- | Buy | |
| 358 | IS/ISO/TR 22370 : 2020/ ISO 1726-2:2007 |
Security and resilience Urban resilience Framework and principles | 0 | ---- | Buy | |
| 359 | IS 2325 : 1981 (1 Revision) |
Specification for ignition coils for battery - Coil ignition systems for automobiles (First Revision) | 3 | Jan, 2021 | Download | |
| 360 | IS 2553 : Part 2 : 2019 (1 Revision) |
Safety glass - Specification: Part 2 for road transport (First Revision) | 4 | ---- | Download | |
| 361 | IS 2560 : 1979 (1 Revision) |
Specification for rubber - Based adhesives for tubes, non - Curing (First Reoision) | 0 | Aug, 2018 | Download | |
| 362 | IS 2561 : 1963 |
Specification for rubber - Based adhesives for the automobile industry | 1 | Mar, 2024 | Download | |
| 363 | IS 2562 : 1979 (1 Revision) |
Specification for rubber - Based adhesives for tyres and tubes, curing (First Revision) | 0 | Mar, 2024 | Download | |
| 364 | IS/ISO 26262 : Part 6 : 2018/ISO 16392:2017 |
Road vehicles Functional safety Part 6: Product development at the software level | 0 | ---- | Buy | |
| 365 | IS/ISO 26800 : 2011/ISO 26800 : 2011 |
Ergonomics — General Approach, Principles and Concepts | 0 | Jun, 2023 | Buy | |
| 366 | IS/ISO 26909 : 2009/ISO 26909 : 2009 |
Springs - Vocabulary | 0 | Dec, 2022 | Buy | |
| 367 | IS 2742 : Part 1 : 1994 (1 Revision) |
Automotive vehicles - Brake linings (Non - Rubberized): Part 1 specification (First Revision) | 0 | Jul, 2019 | Download | |
| 368 | IS 2742 : Part 2 : 1999 |
Automotive vehicles - Brake linings - Rubberised: Part 2 specification | 0 | Jul, 2019 | Download | |
| 369 | IS 2742 : Part 3 : 1994 |
Automotive vehicles - brake linings: Part 3 methods of test | 1 | Jul, 2019 | Download | |
| 370 | IS 2742 : Part 4 : 1994 |
Automotive vehicles - Brake linings: Part 4 coefficient of friction - method of test | 1 | Jul, 2019 | Download | |
| 371 | IS 2742 : Part 5 : 1994 |
Automotivevehicles - - Brakelinings: Part 5 internal shear strength - Method of test | 0 | Jul, 2019 | Download | |
| 372 | IS 2742 : Part 6 : 2018 |
Automotive vehicles - Brake linings: Part 6 compressive strain test methods | 0 | ---- | Buy | |
| 373 | IS 2742 : Part 7 : 2018 |
Automotive vehicles - Brake linings: Part 7 shear test procedure for disc brake pad and drum brake shoe assemblies | 0 | ---- | Download | |
| 374 | IS 2765 : 1982 (1 Revision) |
Specification for radiator hose (First Revision) | 1 | Nov, 2020 | Download | |
| 375 | IS/ISO 28580 : 2009 |
Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results | 0 | Download | ||
| 376 | IS/ISO/IEC 30106 : Part 3 : 2020 |
Information technology Object oriented BioAPI Part 3: C implementation | 0 | ---- | Download | |
| 377 | IS 3028 : Part 1 : 2018 |
Automotive vehicles - Noise emitted by moving vehicles - Specification and method of measurement: Part 1 L 2 category | 1 | Nov, 2023 | Download | |
| 378 | IS 3028 : Part 3 : 2018 |
Automotive vehicles - Noise emitted by moving vehicles - Specification and method of measurement: Part 3 L 5 category | 1 | Nov, 2023 | Download | |
| 379 | IS 3141 : 2007 (2 Revision) |
Starter motors for internal combustion engines used for automotive and other applications - Specification (Second Revision) | 0 | Dec, 2022 | Download | |
| 380 | IS 3169 : 1991 (1 Revision) |
Internal combustion engines - Two stage, one litre, diesel fuel filters (First Revision) | 1 | Nov, 2020 | Download | |
| 381 | IS 3170 : Part 1 : 2006/ISO 2697:1999 (2 Revision) |
Internal Combustion Engines - Fuel Injection Nozzles Part 1 Injection Nozzles - Size `S' | 0 | Nov, 2020 | Buy | |
| 382 | IS 3170 : Part 2 : 2006/ISO 4010:1998 (1 Revision) |
Internal combustion engines - Fuel injection nozzles: Part 2 calibrating nozzle, delay pintle type (First Revision) | 0 | Nov, 2020 | Buy | |
| 383 | IS 3171 : Part 1 : 1997/ISO 2699:1994 (1 Revision) |
Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 1 : Flange Mounted Fuel Injectors Size `S' Types 2, 3, 4, 5 and 6 | 0 | Jul, 2021 | Buy | |
| 384 | IS 3171 : Part 2 : 2006/ISO 7026:1997 (1 Revision) |
Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 2 : Screw-in Injection Nozzle Holders, Types 20, 21, 21.1 and 27 for Pintle Nozzle Size `S', Type B | 0 | Feb, 2021 | Buy | |
| 385 | IS 3171 : Part 3 : 1997/ISO 7030:1987 |
Internal combustion engines - Fuel injection nozzle holders: Part 3 screw mounted injection nozzle holders, types 12,13,14,15,16,17,18 and 19 | 0 | Jul, 2021 | Buy | |
| 386 | IS 3172 : 1997 (2 Revision) |
Internal combustion engines - Fuel injection equipment - Single and double ended pipe unions (Single And Double Ended Banjo) - Specification (Second Revision) | 1 | Jul, 2021 | Download | |
| 387 | IS 3173 : 1965 |
Specification for high pressure connections for fuel injection equipment for diesel engines | 0 | Mar, 2022 | Download | |
| 388 | IS 3174 : 1974 (1 Revision) |
Specification for pipe union bolt (First Revision) | 0 | Mar, 2023 | Download | |
| 389 | IS 3175 : 2013 (2 Revision) |
Internal combustion engine - Sealing washers for pipe unions - Specification (Second Revision) | 0 | May, 2018 | Download | |
| 390 | IS 3351 : 2006/ISO 4020:2001 (2 Revision) |
Road vehicles - Fuel filters for diesel . engines - Test methods (Second Revision) | 0 | Nov, 2020 | Buy | |
| 391 | IS 3400 : Part 2 : Sec 4 : 2022/ISO 12614-5:2021 |
METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 4 INDENTATION HARDNESS BY DUROMETER METHOD (SHORE HARDNESS) ( Second Revision ) | 0 | ---- | Buy | |
| 392 | IS 3649 : 2018 (1 Revision) |
Automotive vehicles - Clutch facing for automotive transmission - Specification (First Revision) | 0 | ---- | Download | |
| 393 | IS 4050 : 1976 (1 Revision) |
Methods of tests for horn switches for automobiles (First Revision) | 2 | Jan, 2021 | Download | |
| 394 | IS 4060 : 1994 (2 Revision) |
Automotive vehicles - Flashers for direction indicators - Specification (Second Revision) | 1 | Dec, 2019 | Download | |
| 395 | IS 4061 : 1967 |
Specification for headlight switches for automobiles | 1 | Jan, 2021 | Download | |
| 396 | IS 4086 : 1983 (1 Revision) |
Specification for distributors for spark ignition engines (First Revision) | 0 | Jan, 2021 | Download | |
| 397 | IS 4357 : 2017 (3 Revision) |
Industrial trucks - Counter balanced trucks with mast - Verification of stability (Third Revision) | 0 | Mar, 2019 | Buy | |
| 398 | IS 4362 : 1979 (1 Revision) |
Specification for number plate lighting devices for automobiles (First Revision) | 2 | Jan, 2021 | Download | |
| 399 | IS 4373 : 1967 |
Specification for hydraulically operated stop light switches for automobiles | 2 | Jan, 2021 | Download | |
| 400 | IS 4530 : 2006 (1 Revision) |
GeneraL requirements for positioning and routing of engine exhaust pipes in motor vehicles (First Revision) | 0 | Jan, 2020 | Download | |
| 401 | IS 4552 : Part 1 : 1993 (1 Revision) |
Automotive vehicles - Portable jacks for automobiles: Part 1 mechanical jacks - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 402 | IS 4552 : Part 2 : 1993 (1 Revision) |
Automotive vehiclesportablejacksfor automobiles: Part 2 hydraulic jacks - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 403 | IS/ISO 4570 : 2002 |
Tyre valve threads | 0 | Jul, 2019 | Download | |
| 404 | IS 4581 : 2021/ISO 12097 - 1 (2 Revision) |
PHOSPHORUS TRICHLORIDE PURE AND ANALYTICAL REAGENT-SPECIFICATION Second Revision IS 4581 | 0 | ---- | Buy | |
| 405 | IS 4660 : 1993 (3 Revision) |
Powered industrial trucks - Terminology (Third Revision) | 0 | Jul, 2019 | Buy | |
| 406 | IS 4815 : 1982 (1 Revision) |
Specification for self - Cancelling direction indicator switches for automobiles (First Revision) | 0 | Jan, 2021 | Download | |
| 407 | IS 5008 : Part 1 : 1987 (1 Revision) |
Data sheet for industrial towing trucks: Part 1 I.C. engine powered | 1 | Feb, 2022 | Download | |
| 408 | IS 5423 : 1989 (2 Revision) |
Automotive vehicles - Shock absorbers - Specification (Second Revision) | 2 | Mar, 2019 | Download | |
| 409 | IS 5439 : 2017 (2 Revision) |
Oil pressure switches for automobiles - Specification (Second Revision) | 0 | May, 2022 | Download | |
| 410 | IS 5545 : 1977 (1 Revision) |
Specification for fog lights for automobiles (First Revision) | 0 | Jan, 2021 | Download | |
| 411 | IS 5546 : 1981 (1 Revision) |
Specification for distribution caps and rotor arms for automobiles (First Revision) | 0 | Jan, 2021 | Download | |
| 412 | IS 5562 : 2000 (2 Revision) |
Automotive vehicles - Fuel gauges - Cross coil movement type - Specification (Second Revision) | 0 | Jan, 2021 | Download | |
| 413 | IS 5577 : 2015 (2 Revision) |
Automotive vehicles - Ammeters - Specification (Third Revision) | 0 | Mar, 2020 | Download | |
| 414 | IS 5791 : 2006/ISO 6621-3:2000 (3 Revision) |
Internal combustion engines - Piston rings - Material specifications (Third Revision) | 0 | Nov, 2020 | Buy | |
| 415 | IS 582 : Part 10 : Sec 3 : 2022/ISO 12614-16:2021 |
METHODS OF CHEMICAL TESTING OF LEATHER Part 10 Determination of chromic oxide content Section 3 Quantification by atomic absorption spectrometry | 0 | ---- | Buy | |
| 416 | IS/IEC 62137 : Part 4 : 2014 |
Electronics assembly technology Part 4 Endurance test methods for solder joint of area array type package surface mount devices | 0 | ---- | Download | |
| 417 | IS 6305 : Part 1 : 1980 (1 Revision) |
Safety code for powered industrial trucks: Part 1 application, operation and maintenance (First Revision) | 0 | Mar, 2021 | Buy | |
| 418 | IS 6305 : Part 2 : 1980 (1 Revision) |
Safety code for powered industrial trucks: Part 2 manufacture | 0 | Mar, 2016 | Buy | |
| 419 | IS/ISO 6621 : Part 1 : 2018/ISO 6621-1:2018 (1 Revision) |
Internal Combustion Engines — Piston Rings Part 1 Vocabulary ( First Revision ) | 0 | ---- | Buy | |
| 420 | IS/ISO 6722 : Part 2 : 2013/ISO 6722-2:2013 |
Road vehicles - 60 V and 600 V single - Core cables: Part 2 dimensions, test methods and requirements for aluminium conductor cables (First Revision) | 0 | ---- | Buy | |
| 421 | IS 6740 : 1985 (1 Revision) |
Specification for gudgeon pins for internal combustion engines (First Revision) | 1 | Nov, 2020 | Download | |
| 422 | IS 6750 : 1985 (1 Revision) |
Specification for cylinder liners for internal combustion engines (First Revision) | 1 | Nov, 2020 | Download | |
| 423 | IS 6763 : Part 1 : 1987 (1 Revision) |
Specification and testing for fifth wheel king pin for semi - Trailers: Part 1 size 50 (First Revision) | 1 | Jul, 2016 | Buy | |
| 424 | IS 6763 : Part 2 : 1987 (1 Revision) |
Specification and testing for fifth wheel king pin for semi - Trailers: Part 2 size 90 (First Revision) | 1 | Jul, 2016 | Buy | |
| 425 | IS 6765 : Part 1 : 2003 (1 Revision) |
Powered industrial trucks - Parameters for designation of rated capacity and capacity: Part 1 powered high lift trucks (First Revision) | 0 | Jan, 2019 | Download | |
| 426 | IS 6876 : 2019 (2 Revision) |
Fork - Lift trucks - Fork arms - Technical characteristics and testing (Second Revision) | 0 | ---- | Download | |
| 427 | IS 7001 : 2017 (2 Revision) |
Springs - Shot peening - General procedures (Second Revision) | 0 | Mar, 2024 | Buy | |
| 428 | IS 7016 : Part 3 : Sec 1 : 2022/ISO 12614-1:2021 (2 Revision) |
METHODS OF TEST FOR RUBBER OR PLASTICS COATED FABRICS PART 3 DETERMINATION OF TEAR RESISTANCE SECTION 1 CONSTANT RATE OF TEAR METHODS ( Third Revision ) | 0 | ---- | Buy | |
| 429 | IS 7065 : 1973 |
Specification for steering wheels | 1 | Mar, 2021 | Download | |
| 430 | IS 7079 : 2008 (3 Revision) |
Automotive vehicles - Brake hose assemblies forhydraulicbraking systems used with non - Petroleum base brake fluid specification (Third Revision) | 2 | May, 2024 | Download | |
| 431 | IS 7217 : 1990 (1 Revision) |
Classification and nomenclature of powered industrial trucks (First Kevisim) | 0 | Feb, 2022 | Buy | |
| 432 | IS 7309 : 2018/ISO 22915-3 : 2014 (2 Revision) |
Industrial trucks - Verification of stability reach and straddle trucks (Second Revision) | 0 | Mar, 2019 | Buy | |
| 433 | IS 7347 : 1974 |
SPECIFICATION FOR PERFORMANCE OF SMALL SIZE SPARK IGNITION ENGINES FOR AGRICULTURAL WATER PUMPS, SPRAYERS, TILLERS, REAPERS AND OTHER SIMILAR APPLICATIONS | 4 | Aug, 2021 | Download | |
| 434 | IS 7449 : Part 1 : 1974 |
Glossary of terms for IC engines: Part 1 fuel injection equipment | 0 | Sep, 2019 | Download | |
| 435 | IS 7451 : Part 1 : 2020/ISO 2710-1:2017 (2 Revision) |
Reciprocating Internal Combustion Engines — Vocabulary Part 1 Terms for Engine Design and Operation ( Second Revision ) | 0 | ---- | Buy | |
| 436 | IS 7451 : Part 2 : 2006/ISO 1204:1990 (1 Revision) |
Reciprocating internal combustion engines: Part 2 designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right - Hand and left - Hand in - Line engines and locations on an engine (First Revision) | 0 | Jul, 2021 | Buy | |
| 437 | IS 7451 : Part 6 : 2007/ISO 2261:1994 (1 Revision) |
Reciprocating internal combustion engines: Part 6 hand - Operated control devices - Standard direction of motion (First Revision) | 0 | Mar, 2017 | Buy | |
| 438 | IS 7471 : 1974 |
Recommendation for polarity of earth connections and marking of electrical equipment for automobiles | 0 | Jan, 2021 | Download | |
| 439 | IS 7496 : 1974 |
Specification for direction of travel - Controls for industrial tractors and powered industrial trucks | 0 | Mar, 2021 | Buy | |
| 440 | IS 7525 : 2017/ISO 2328: 2011 (2 Revision) |
Fork - Lift trucks - Hook - On type fork arms and fork arm carriages - Mounting dimensions (Second Revision) | 0 | Feb, 2022 | Buy | |
| 441 | IS 7552 : 2018 (2 Revision) |
Industrial trucks - Verification of stability - Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated (Second Revision) | 0 | ---- | Buy | |
| 442 | IS 7553 : 2003 (1 Revision) |
Control symbols for powered industrial trucks - Specification (First Revision) | 0 | Jan, 2019 | Buy | |
| 443 | IS 7570 : 1975 |
Glossary of terms relating to fork arms and attachments of fork lift trucks | 0 | Jul, 2021 | Buy | |
| 444 | IS 7611 : 1993 (1 Revision) |
Internal combustion engines radiators - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 445 | IS 7621 : 2018/ISO 6055:1997 (2 Revision) |
Industrial trucks - Overhead guards - Specification and testing (Second Revision) | 0 | Jan, 2023 | Buy | |
| 446 | IS 7631 : 2018/ISO 22915-4:2009 (1 Revision) |
Industrial trucks - Pallet stackers, double stackers and order - Picking trucks with operator position elevating up to and including 1200 mm lift height - Verification of stability (Second Revision) | 0 | ---- | Buy | |
| 447 | IS 7657 : Part 1 : 1975 |
Specification for starter ring gears for internal combustion engines: Part 1 gears for inertia and solenoid pre - Engaged starters | 1 | Mar, 2023 | Download | |
| 448 | IS 7657 : Part 2 : 1975 |
Specification for starter ring gears for internal combustion engines: Part 2 gears for axial and coaxial starters | 0 | Sep, 2019 | Download | |
| 449 | IS 7774 : Part 1 : 1975 |
Glossary of terms relating to transport tractors and trailers: Part 1 basic terms | 2 | Feb, 2022 | Download | |
| 450 | IS 7774 : Part 2 : 2003 (1 Revision) |
Glossary of terms relating to transport tractors and trailers: Part 2 dimensions (First Revision) | 0 | Jan, 2019 | Download | |
| 451 | IS 7827 : Part 1 : 1975 |
Specification for electrical wind screen wipers: Part 1 wiper system | 1 | Jan, 2021 | Download | |
| 452 | IS 7827 : Part 2 : 1975 |
Specification for electrical wind screin wipers: Part 2 wiper motors | 2 | Jan, 2021 | Download | |
| 453 | IS 7827 : Part 3 : Sec 1 : 1993 |
Automotive vehicles electrical wiNd screEn wipers: Part 3 wiper arms and blades section 1 wiper arms - Specification | 0 | Feb, 2019 | Download | |
| 454 | IS 7827 : Part 3 : Sec 2 : 1985 |
Specification for electrical wind screen wiper: Part 3 wiper arms and blades section 2 wiper blades | 0 | Jan, 2021 | Download | |
| 455 | IS 7862 : 1975 |
Glossary of terms relating to safety aspects concerning operating areas of industrial trucks | 0 | Jul, 2021 | Download | |
| 456 | IS 7864 : Part 1 : 1975 |
Specification for upholstery springs 1: Part 1 conical type | 0 | Dec, 2023 | Download | |
| 457 | IS 7864 : Part 2 : 1979 |
SpecificAtion for . upholstrey springs: Part 2 ziGzag type | 0 | Mar, 2024 | Download | |
| 458 | IS 7906 : Part 1 : 1997 (1 Revision) |
Helical compression springs: Part 1. design and calculation for springs made from circular section wire and bar (First Revision) | 0 | Dec, 2023 | Download | |
| 459 | IS 7906 : Part 2 : 1975 |
Helical compression springs: Part 2 specification for cold coiled springs made from circular section wire an d bar | 1 | Mar, 2019 | Download | |
| 460 | IS 7906 : Part 3 : 1975 |
Helical compression springs: Part 3 data sheet for specifications for springs made from circular section wire and bar | 0 | Jan, 2020 | Download | |
| 461 | IS 7906 : Part 4 : 1987 |
Helical compression springs: Part 4 selection of standard cold coiled springs made from circular section wire and bar | 0 | Mar, 2019 | Download | |
| 462 | IS 7906 : Part 5 : 2004 (2 Revision) |
Helical compression springs: Part 5 hot coiled springs made from circular section bars - Specification (Second Revision) | 1 | Mar, 2019 | Download | |
| 463 | IS 7906 : Part 6 : 1978 |
Helical compression springs: Part 6 design and calculations for springs made from rectangular section bar - Steel | 0 | Mar, 2024 | Download | |
| 464 | IS 7906 : Part 7 : 1989 |
Helical compression springs: Part 7 quality requirements for cylindrical coil compression springs used mainly as vehicle suspension springs | 0 | Mar, 2019 | Download | |
| 465 | IS 7906 : Part 8 : 1989 |
Helical compression springs: Part 8 method of inspection of hotcoiled compression springs made from circular section bars | 0 | Mar, 2019 | Download | |
| 466 | IS 7907 : Part 1 : 2004 (1 Revision) |
Helical extension springs october 2004: Part 1 design and calculation for springs made from circular section wire and bar (First Revision) | 0 | Mar, 2019 | Download | |
| 467 | IS 7907 : Part 2 : 1976 |
Helical extension springs: Part 2 specification for cold coiled springs made from circular section wire and bar | 0 | Mar, 2024 | Download | |
| 468 | IS 7907 : Part 3 : 1975 |
Helical extension springs: Part 3 data sheet for specifications for springs made from circular section wire and bar | 0 | Mar, 2024 | Download | |
| 469 | IS 7907 : Part 4 : 1987 |
Specification for helical extension springs: Part 4 selection of standard cold coiled springs made - From circular section wire and bar | 0 | Dec, 2023 | Download | |
| 470 | IS 7953 : 1976 |
Specification for horn rings for automobiles | 1 | Jan, 2021 | Download | |
| 471 | IS 7998 : 1986 (1 Revision) |
Specification for contact breakers for two wheelers, three wheelers and stationary spark ignition engines (First Revision) | 2 | Jan, 2021 | Download | |
| 472 | IS 8007 : 2004/ISO 1726: 2000 (1 Revision) |
Road vehicles - Mechanical coupling between tractors and seml - Trailers - Interchangeability (First Revision) | 0 | Jul, 2019 | Buy | |
| 473 | IS 8037 : 2005 (1 Revision) |
General requirements for transport tractor - Trailers (First Revision) | 0 | Mar, 2021 | Download | |
| 474 | IS/IEC 80601 : Part 2 : Sec 49 : 2018/ISO 12097-3 |
Medical electrical equipment Part 2- Particular requirements for basic safety and essential performance- Sec 49 Multifunction patient monitors | 0 | ---- | Buy | |
| 475 | IS 8066 : Part 3 : 2020/ISO 22915-7 : 2016 |
Rubber and Plastics Hoses and Hose assemblies for Automotive Air Conditioning Specification Part 3 Refrigerant 1234yf Adoption of ISO 8066-3:2020 | 0 | ---- | Buy | |
| 476 | IS 810 : 1991 (2 Revision) |
Internal combustion engines - Engine valves - Specification (Second Revision) | 0 | Nov, 2020 | Download | |
| 477 | IS 8116 : 1976 |
Specification for moped spokes and nipples for spokes | 0 | Jan, 2020 | Download | |
| 478 | IS 8118 : 2008 (3 Revision) |
Automotive vehicles - Opacity (Smoke) of exhuast gas from vehicles equipped with compression ignition engines operating under free acceleration - Method of measurement (Third Revision) | 0 | Jan, 2019 | Download | |
| 479 | IS/ISO 8178 : Part 7 : 2015/ISO 8178-7:2015 (1 Revision) |
Reciprocating internal combustion engine - Exhaust emission measurement: Part 7 engine family determination (First Revision) | 0 | Nov, 2020 | Buy | |
| 480 | IS/ISO 8178 : Part 8 : 2015/ISO 8178-8:1994 |
Reciprocating internal combustion engines - Exhaust emission measurement: Part 8 engine group determination | 0 | Nov, 2020 | Buy | |
| 481 | IS 8274 : 1976 |
Specification for drawbar eyes and forecarriage pins for connection between trailers of gross mass above 5 tonnes and upto 35 tonnes and transport tractor | 0 | Feb, 2022 | Download | |
| 482 | IS 8296 : 1976 |
Specification for towing jaw for use between trailers of up to 35 tonnes gross mass and transport tractor | 0 | Feb, 2022 | Download | |
| 483 | IS 8297 : 1976 |
Specification for towing jaw for use between trailers of up to 16 tonnes gross mass and transport tractor | 0 | Feb, 2022 | Download | |
| 484 | IS 8298 : 1976 |
Specification for towing jaw for use between trailers of up to 5 tonnes gross mass and transport tractor | 0 | Feb, 2022 | Download | |
| 485 | IS 8299 : 1976 |
Specification for towing hook for use between trailers of up to 16 tonnes gross mass and transport tractor | 0 | Feb, 2022 | Download | |
| 486 | IS 8300 : 1976 |
Specification for towing hook for use between trailers of up to 35 tonnes gross mass and transport tractor | 0 | Feb, 2022 | Download | |
| 487 | IS 8339 : 1993 (1 Revision) |
Automotive vehicles - Reflex reflectors - Specification (First Revision) | 0 | Feb, 2019 | Download | |
| 488 | IS 8395 : Part 1 : 1977 |
Specification for cable terminations for automobile wiring: Part 1 blade type connectors (Male And Female) | 1 | Jan, 2021 | Download | |
| 489 | IS 8395 : Part 2 : 1977 |
Specification for cable terminations for automobile wiring: Part 2 bullet and tube connectors | 1 | Jan, 2021 | Download | |
| 490 | IS 8411 : 1977 |
Specification for foot tyre inflators for road vehicles | 0 | Dec, 2020 | Download | |
| 491 | IS 8422 : Part 1 : 1977 |
Specification for piston rings for IC engines: Part 1 plain compression rings from 30 up to 200 mm nominal diameter R - Rings | 0 | Sep, 2019 | Download | |
| 492 | IS 8422 : Part 2 : 1977 |
Specification for piston rings for IC engines: Part 2 taper faced compression rings from 30 up to 200 mm nominal diameter M - Rings | 0 | Sep, 2019 | Download | |
| 493 | IS 8422 : Part 3 : 1977 |
Specification for piston rings for IC engines: Part 3 keystone rings from 82 up to 200 mm nominal diameter T - Rings 15 | 0 | Sep, 2019 | Download | |
| 494 | IS 8422 : Part 4 : 1977 |
Specification for piston rings for IC engines: Part 4 napier oil scraper rings from 30 up to 200 mm nominal diameter N - Rings | 0 | Sep, 2019 | Download | |
| 495 | IS 8422 : Part 5 : 1977 |
Specification for piston rings for IC engines: Part 5 stepped oil scraper rings from 30 up to 200 mm nominal diameter Z - Rings | 0 | Sep, 2019 | Download | |
| 496 | IS 8422 : Part 6 : 1977 |
Specification for piston rings for IC engines: Part 6 slotted oil control rings from 50 up to 200 mm nominal diameter S - Rings | 0 | Sep, 2019 | Download | |
| 497 | IS 8422 : Part 7 : 1977 |
Specification for piston rings for IC engines: Part 7 double bevelled slotted oil control rings from 50 up to 200 mm nominal diameter G - Rings | 0 | Sep, 2019 | Download | |
| 498 | IS 8422 : Part 8 : 1977 |
Specification for piston rings for IC engines: Part 8 narrow land slotted oil control rings from 50 up to 200 mm nominal diameter D - Rings | 0 | Sep, 2019 | Download | |
| 499 | IS 8503 : 1986 (1 Revision) |
Technical supply conditions for aluminium alloy pistons for internal combustion engines (First Revision) | 1 | Nov, 2020 | Download | |
| 500 | IS/ISO 8528 : Part 1 : 2018/ISO 8528-1:2018 (1 Revision) |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 1 Application, Ratings and Performance ( First Revision ) | 0 | ---- | Buy | |
| 501 | IS/ISO 8528 : Part 4 : 2005/ISO 8528-4:2005 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 4 controlgear and switchgear | 0 | Sep, 2019 | Buy | |
| 502 | IS/ISO 8528 : Part 5 : 2018/ISO 8528-5:2018 (1 Revision) |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 5 Generating Sets ( First Revision ) | 0 | ---- | Buy | |
| 503 | IS/ISO 8528 : Part 6 : 2005/ISO 8528-6:2005 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 6 test methods | 0 | Sep, 2019 | Buy | |
| 504 | IS/ISO 8528 : Part 7 : 2017/ISO 8528-7:2017 (1 Revision) |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 7 Technical Declarations for Specification and Design ( First Revision ) | 0 | ---- | Buy | |
| 505 | IS/ISO 8528 : Part 8 : 2016/Identical to ISO 852 (1 Revision) |
Reciprocating internal combustion engine driven alternating current generating sets: Part 8 requirements and tests for low - Power generating sets (First Revision) | 0 | ---- | Buy | |
| 506 | IS/ISO 8528 : Part 9 : 2017/ISO 8528-9:2017 (1 Revision) |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 9 Measurement and Evaluation of Mechanical Vibrations ( First Revision ) | 0 | ---- | Buy | |
| 507 | IS/ISO 8528 : PART 10 : 1998/ISO 8528-10 : 1998 |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets: Part 10 Measurement of Airborne Noise by the Enveloping Surface Method | 0 | Sep, 2019 | Buy | |
| 508 | IS/ISO 8528 : PART 12 : 1997/ISO 8528-12:1997 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 12 emergency power supply to safety services | 0 | Sep, 2019 | Buy | |
| 509 | IS/ISO 8601 : Part 2 : 2019/ISO 12614-15:2021 |
Date and Time Representations For Information Interchange Part 2: Extensions | 0 | Nov, 2023 | Buy | |
| 510 | IS 8752 : 1978 |
Specification for towing hook for use between trailers of up to 5 tonnes gross mass and transport tractor | 0 | Feb, 2022 | Download | |
| 511 | IS 8790 : Part 1 : 1978 |
General requirements of powered industrial trucks working in hazardous areas: Part 1 internal combustion engine powered trucks | 0 | Jul, 2021 | Download | |
| 512 | IS 8790 : Part 2 : 1978 |
General requirements of powered industrial trucks working in hazardous areas: Part 2 electric - Battery - Powered industrial trucks | 0 | Jul, 2021 | Download | |
| 513 | IS 8903 : 1978 |
Specification for drawbars for trailers of up to 5 tonnes gross mass | 0 | Feb, 2022 | Download | |
| 514 | IS 8924 : 1978 |
Specification for bushes for leaf spring assemblies for automotive suspension | 0 | Mar, 2024 | Download | |
| 515 | IS 8925 : 2015/ISO 8854:2012 (1 Revision) |
Road vehicles - Alternators with regulators - Test methods and general requirements (First Revision) | 0 | Mar, 2021 | Buy | |
| 516 | IS 9057 : 1998 (2 Revision) |
Automotive vehicles - Exhaust emissions - Carbon monoxide concentration at idling for vehicles equipped with spark ignition engines - Method of measurement (Second Revision) | 0 | Dec, 2017 | Download | |
| 517 | IS 9075 : 1979 |
Stability tests for side loader trucks | 0 | Mar, 2021 | Buy | |
| 518 | IS 9081 : 2017 (5 Revision) |
Automotive vehicles - Valves and valve accessories for pneumatic tyres - Specification (Fifth Revision) | 1 | ---- | Download | |
| 519 | IS 9099 : Part 1 : 1979 |
Performance testing of powered industrial trucks workin - G in hazardous areas: Part 1 - Internal combustion engine powired | 0 | Jan, 2021 | Download | |
| 520 | IS 9099 : Part 2 : 1980 |
Performance testing of powered industrial trucks working in hazardous areas: Part 2 electric battery powered industrial trucks | 0 | Mar, 2021 | Download | |
| 521 | IS 9168 : 2018 (2 Revision) |
Automotive vehicle - All rubber flaps for pneumatic tyres - Specification (Second Revision) | 1 | ---- | Download | |
| 522 | IS 9211 : 2003 (2 Revision) |
Terms and definitions of weights of road vehicles other than 2 and 3 wheelers (Second Revision) | 1 | May, 2024 | Download | |
| 523 | IS 9238 : 1979 |
Lateral spacing of foot controls for passenger cars | 0 | Feb, 2017 | Buy | |
| 524 | IS 9262 : 1979 |
Recommendations for gear positions for road vehicles | 0 | Nov, 2020 | Download | |
| 525 | IS 9264 : Part 1 : 1979 |
Specification for interior lighting of motor vehicle: Part 1 general requirements and recommendations | 0 | Jan, 2021 | Download | |
| 526 | IS 9290 : 1979 |
Specification for aircraft fuel servicing vehicles | 0 | Jan, 2020 | Download | |
| 527 | IS 9317 : 2022 (2 Revision) |
SKIS VOCABULARY | 0 | ---- | Download | |
| 528 | IS 9418 : 1980 |
Dimensions for mounting flanges for in - Line fuel injection pumps for multi - Cylinder compressiom ignition engines | 0 | Nov, 2020 | Download | |
| 529 | IS 9420 : Part 1 : 1988 (1 Revision) |
Specification for feed pumps for diesel fuel injection equipment: Part 1 external dimensions(First Revision) | 0 | Sep, 2019 | Download | |
| 530 | IS 9420 : Part 2 : 1988 |
Specification for feed pumps for diesel fuel injection equipment: Part 2 types of drives | 0 | Sep, 2019 | Download | |
| 531 | IS 9432 : 1980 |
Specification for ignition switches for automobiles | 2 | Jan, 2021 | Download | |
| 532 | IS 9433 : 1980 |
Specification for piano key type switches for use in automobiles | 1 | Jan, 2021 | Download | |
| 533 | IS 9435 : 2004/ISO 612 (E) (1 Revision) |
Terms and Definitions Relating to Dimensions of Road Vehicles Other than 2 and 3 Wheelers | 1 | Jul, 2019 | Buy | |
| 534 | IS 9436 : 2018 (1 Revision) |
Performance requirements and methodsof test for wheels for passenger cars, quadricycles and mini goods cariers (First Revision) | 1 | ---- | Download | |
| 535 | IS 9438 : 2018 (1 Revision) |
Performance requirements and methods of tests for wheels/ rims for trucks and buses (First Revision) | 1 | ---- | Download | |
| 536 | IS 9453 : 2014 (2 Revision) |
Valve caps for tyre tube valves for automotive vehicles - Specification (Second Revision) | 0 | Jan, 2019 | Download | |
| 537 | IS 9465 : 1980 |
Mounting dimensions for in - Line injection pump assemblies for fuel injection equipment for multi - Cylinder compression ignition engines | 1 | Nov, 2020 | Download | |
| 538 | IS 9484 : 1980 |
Specification for centre bolts for leaf springs | 1 | Jan, 2020 | Download | |
| 539 | IS 9500 : 2017 |
360 degree rotary emergency warning lights/special warning lamps - Specification (First Revision) | 0 | Aug, 2022 | Download | |
| 540 | IS 9521 : 1980 |
Specification for push - Button type switches for automotive vehicles | 0 | Jan, 2021 | Download | |
| 541 | IS 9574 : 2004 (2 Revision) |
Leaf springs assembly clips - Specification (Second Revision) | 0 | Mar, 2019 | Download | |
| 542 | IS 9643 : 1980 |
Specification for non - Skid type chain assembly for tyres - Single type | 0 | Mar, 2024 | Download | |
| 543 | IS 9701 : 2019 (2 Revision) |
Powered industrial trucks and tractors - Brake performance and component strength (Second Revision) | 0 | ---- | Buy | |
| 544 | IS 9760 : 1981 |
Dimensions for coupling arrangements between towing vehicle and trailer | 0 | Jul, 2021 | Download | |
| 545 | IS 9801 : 1981 |
Specification for laminated springs for railway rolling stock | 0 | Dec, 2023 | Download | |
| 546 | IS 9895 : 2004 (1 Revision) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements (First Revision) | 0 | Jul, 2019 | Download | |
| 547 | IS 9905 : 1981 |
Specification for pneumatic coupling between tractors and trailers | 0 | Jul, 2021 | Buy | |
| 548 | IS 9942 : 1981 |
Specification for t - Sign plate for trailers | 1 | Jul, 2016 | Download |