Indian_standards - BIS Connect

Basic Details/ मूल ब्यौरा

IS Number/आईएस संख्या : IS/IEC 60603-4:1987
60603-4 : 1987

IS Title/आईएस शीर्षक : Connectors for frequencies below 3 MHz for use with printed boards Part 4: Two-part connectors for printed boards having contacts spaced at 1.91 mm ( 0.075 in )centres and staggered terminations at that same spacing

Superseding IS/सुपरसीडिंग आईएस : None

Degree of Equivalence/समतुल्यता स्तर : Identical under single numbering

Number of Revisions/पुनरीक्षणों की संख्या : New Standard

Number of Amendments/संशोधनों की संख्या : No amendment issued

Aspect/पक्ष : Product Specification

Language/भाषा : English

Reaffirmation Year/पुनर्पुष्टि वर्ष :

Technical Department/तकनीकी विभाग : LITD (Electronics and Information Technology Department)

Technical Committee/तकनीकी समिति : LITD 03 (Electromechanical Components And Mechanical Structures For Electronic--equipment Sectional Committee)

Member Secretary/सदस्य सचिव : Pritam Sarkar

Other Details

Indian Standard

Click to download

Amendment : 0

Gazette Document : 1

Click to download

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Click to view

Cross Reference Details

Click to view

Composition

Click to View

Corrigendum : 0

Cross Reference Details

Indian Standards Referred In IS IS/IEC 60603-4:1987
60603-4 : 1987
:

1	IS 1885 (Part 6):1978	Electrotechnical vocabulary: Part 6 printed circuits (First Revision)	LITD 05
2	IS 10424:1982	Guide for design and use of printed boards	LITD 05
3	IS 12448 (Part 1):1988	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 1 general	LITD 03
4	IS 12448 (Part 2/Sec 1):1988	Basic testing procedures and measuring methods for electrotechnical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 1 general examination	LITD 03
5	IS 12448 (Part 2/Sec 2):1988	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 2 electrical continuity and contact resistance tests	LITD 03
6	IS 12448 (Part 2/Sec 3):1988	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 3 insulation tests	LITD 03
7	IS 12448 (Part 2/Sec 4):1988	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 2 general examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests: Sec 4 voltage stress tests	LITD 03
8	IS 12448 (Part 3):1989	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 3 current - Carrying capacity tests	LITD 03
9	IS 12448 (Part 4):1989	Basic testing procedures and measuring methods for Electromechanical components for electronic equipment: Part 4 dynamic stress tests	LITD 03
10	IS 12448 (Part 5/Sec 1):1989	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 1 impact tests (Free Components)	LITD 03
11	IS 12448 (Part 5/Sec 2):1989	Basic testing procedure and measuring methods for electromechanical components: Part 5 (Fixed For Electronic Equipment Impact Tests (Free Components), static load tests components), endurance tests and overload tests .: Sec 2 static load tests (Fixed Components)	LITD 03
12	IS 12448 (Part 5/Sec 3):1989	Basic testing measuring standard procedures and methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 3 endurance tests	LITD 03
13	IS 12448 (Part 5/Sec 4):1989	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 5 impact tests (Free Components), static load tests (Fixed Components), endurance tests and overload tests: Sec 4 overload tests	LITD 03
14	IS 12448 (Part 6):1991	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 6 climatic tests and soldering tests	LITD 03
15	IS 12448 (Part 7):1990	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 7 mechanical operating tests and sealing tests	LITD 03
16	IS 12448 (Part 8):1992	Basic testing procedures and measuring methods for electromechanical components for electronic equipment: Part 8 connector tests (Mechanical) and mechanical tests on contacts and terminations	LITD 03
17	IS 12448 (Part 9):1992	Basic testing procedures and measuring methods for electromechanical components for electronic equipment:Part 9 Cable-clamping tests, explosion hazard tests,chemical resistance tests,fire hazard tests of	LITD 03
18	IS 8945:1987	Specification for electrical measuring instruments for explosive gas atmospheres (First Revision)	ETD 22

International Standards Referred In IS/IEC 60603-4:1987
60603-4 : 1987

1	IEC 60050 : 581 : 2008
2	IEC 60603 : 1 : 1981

IS/IEC 60603-4:1987
60603-4 : 1987
is Referred in following Indian Standards :

1	IS 265 : 2021	HYDROCHLORIC ACID SPECIFICATION Fifth Revision	CHD 01
2	IS 2840 : 2002	China clay for ceramic industry - Specification (Second Revision)	CHD 09
3	IS 4589 : 2002	Plastic clay and washed plastic clay for ceramic industry - Specification (Third Revision)	CHD 09
4	IS 15030 : 2001	Terephthalic acid - Specification	PCD 09
5	IS 4751 : 1994	Potassium metabisulphite, food grade - Specification (First Revision)	FAD 08
6	IS 1885 : Part 75 : 2021	Electrotechnical Vocabulary Part 75 : Control Technology (Second Revision)	ETD 01
7	IS 5464 : 1995	Citric acid, monohydrate - Specification	PCD 09
8	IS 6046 : 1982	Specification for gypsum for agricultural use (First Revision)	FAD 07
9	IS 8876 : 1978	Method for dete - Rmination of residue on chlorination of tungsten metal powder	MTD 25
10	IS 4105 : 2020	Specification for Styrene ( Vinyl Benzene ) ( Second Revision )	PCD 09
11	IS 12113 : 1987	Specification for ferrous sulphate heptahydrate, agricultural grade	FAD 07
12	IS 1909 : 1992	Indian curry powder - Specification (First Revision)	FAD 09
13	IS 13268 : 1992	Demineraltzation plant - Guidelines	CHD 13
14	IS 9909 : 1981	Specification for succinic acid for electroless plating	CHD 05
15	IS 12846 : 1989	Boric acid, photographic grade - Specification	CHD 05
16	IS 5295 : 1985	Specification for ethylene glycol (First Revision)	PCD 09
17	IS 1163 : 1992	Chocolates - Specification (Second Revision)	FAD 06
18	IS 254 : 1973	Specification for magnesium chloride (Second Revision)	CHD 01
19	IS 6831 : 1992	Caustic potash - Specification (Second Revision)	CHD 01
20	IS 2697 : 1976	Specification for ammonium bicarbonate for food industry (First Revision)	FAD 08
21	IS 255 : 1982	Specification for sodium sulphate, anhydrous (Technical Grade) (Second Revision)	CHD 01
22	IS 333 : 1980	Specification for potassium permanganate (Second Revision)	CHD 01
23	IS 380 : 1978	Specification for french chalk, technical (Second Revision)	CHD 01
24	IS 6605 : 1972	Specification for potassium chromate	CHD 01
25	IS 8642 : 1977	Specification for dyes for water - Based writing inks	CHD 14
26	IS 296 : 1986	Specification for sodium carbonate, anhydrous (Third Revision)	CHD 01
27	IS 330 : 1992	Chromium trioxide - Specification (Second Revision)	CHD 05
28	IS 573 : 1992	Trisodium phosphate - Specification (Fourth Revision)	CHD 01
29	IS 711 : 1970	Specification for ferric choride, technical (First Revision)	CHD 01
30	IS 799 : 1985	Specification for ammonia, liquor (Second Revision)	CHD 01
31	IS 2124 : 2000	Sodium bicarbonate - Specification (Second Revision)	CHD 01
32	IS 64 : 1972	Specification for barium sulphate pigments for paints (First Revision)	CHD 21
33	IS 12210 : 1987	Specification for caprolactam	PCD 12
34	IS 1448 : Part 138 : 2018	Methods of test for petroleum and its products [ p : 138 ] determination of soap content (First Revision)	PCD 01
35	IS 3959 : 2004	Skin powder - Specification (Second Revision)	PCD 19
36	IS 797 : 1982	Specification for common salt for chemical industries (Third Revision)	CHD 01
37	IS 9591 : 1996	Plasticizer esters - Methods of sampling and tests (First Revision)	PCD 27
38	IS 419 : 1967	Specification for putty, for use on window frames (First Revision)	CHD 20
39	IS 2018 : 1998	Chemical analysis of calcium silicon (Second Revision)	MTD 34
40	IS 9788 : 1981	Specification for titanium dioxide, rutile for paints	CHD 21
41	IS 7884 : 2004	Shampoo, surfactant based - Specification (Third Revision)	PCD 19
42	IS 2017 : 1967	Methods of chemical analysis of metallic manganese	MTD 34
43	IS 14194 : Part 1 : 2020	Radionuclides In Environmental Samples — Methods of Estimation Part 1 Gross Beta Activity Measurement ( Second Revision )	CHD 30
44	IS 3026 : 1991	Tin salts for electroplating - Specification (Second Revision)	CHD 05
45	IS 1156 : 1957	Specification for pearl barley	FAD 16
46	IS 10377 : 1982	Specification for para - Phenylenediamine	PCD 19
47	IS 3088 : 1967	Method for assaying of fine grade palladium	MTD 10
48	IS 9925 : 1981	Method for determination of gold and silver in gold and silver thread and embroidery materials	MTD 10
49	IS 256 : 1972	Specification for glauber salt (Sodium Sulphate, Decahydrate), technical first revision)	CHD 01
50	IS 505 : 1995	Light kaolin - Specification (Third Revision)	CHD 01
51	IS 566 : 1984	Specification for disodium phosphate, dodecahydrate (Second Revision)	CHD 01
52	IS 567 : 1993	Disodium phosphate, anhydrous - Specification (Second Revision)	CHD 01
53	IS 2270 : 1965	Methods for assaying of platinum and platinum alloys	MTD 10
54	IS 13055 : 1991	Methods of sampling and test for anaerobic adhesives and sealants	PCD 27
55	IS 574 : 1989	Glassy sodium metaphosphate specification (Fourth Revision)	CHD 01
56	IS 5296 : 1995	Chloroform, Pure and Technical - Specification (Second Revision)	PCD 09
57	IS 260 : 2001	Aluminium sulphate, non - Ferric - Specification (Second Revision)	CHD 01
58	IS 297 : 2001	Sodium sulphide, technical - Specification (Second Revision)	CHD 01
59	IS 571 : 2000	Monosodium phosphate specification (Second Revision)	CHD 01
60	IS 10513 : 1983	Specification for sodium oleostearate, technical (Soap Noodles)	CHD 25
61	IS 251 : 1998	Sodaash,technical - Specification (Fourth Revision)	CHD 01
62	IS 9924 : 1981	Specification for rhodium salts for electroplating	CHD 05
63	IS 258 : 2000	Potash alum - Specification (Second Revision)	CHD 01
64	IS 1218 : 1978	Determination of Phenols - (SEE IS 1201 to IS 1220)	PCD 06
65	IS 1219 : 1978	Determination of Naphthalene - (SEE IS 1201 to IS 1220)	PCD 06
66	IS 354 : Part 2 : 1986	Methods of sampling and test for resins for paints: Part 2 special test methods for alkyd resins (Second Revision)	CHD 21
67	IS 877 : 1989	Activated carbons, powdered and granular - Methods of sampling and test (Second Revision)	CHD 01
68	IS 701 : 1966	Specification for zinc chloride (Revised)	CHD 01
69	IS 1040 : 1987	Specification for calcium carbide, technical (Third Revision)	CHD 01
70	IS 1113 : 1965	Specification for ammonium chloride, technical and pure (Revised)	CHD 01
71	IS 308 : 1988	Specification for Dissolved Acetylene (Gas) (Third Revision)	CHD 06
72	IS 879 : 1981	Specification for sodium nitrite (First Revision)	CHD 01
73	IS 1078 : 1987	Specification for copper naphthenate (Second Revision)	CHD 01
74	IS 4846 : 1968	Specification for sodium potassium tartrate (Rochelle Salt)	CHD 05
75	IS 1809 : 1979	Specification for nickel salts for electroplating (Second Revision)	CHD 05
76	IS 1109 : 1980	Specification for borax (Second Revision)	CHD 01
77	IS 1314 : 1984	Specification for calcium chloride (Second Revision)	CHD 01
78	IS 1089 : 1986	Specification for oleum, technical (Second Revision)	CHD 01
79	IS 1699 : 1995	Methods of sampling and test for food colours (Second Revision)	FAD 08
80	IS 354 : Part 1 : 1987	Methods of sampling and test for resins for paints: Part 1 general test methods (Second Revision)	CHD 21
81	IS 3144 : 1992	Mineral wool thermal insulation materials - Method of test (Second Revision)	CHD 27
82	IS 70 : 1980	Specification for cuprous oxide for paints (First Revision)	CHD 21
83	IS 228 : Part 3 : 1987	Methods for chemical analysis 6f steels: Part 3 determination of phosphorus by alkalimetric method (Third Revision	MTD 34
84	IS 3607 : 1979	Specification for magnesite for chemical industry (First Revision)	CHD 01
85	IS 1813 : 1961	Code of Practice for Treatment of Water for Marine Boilers	CHD 13
86	IS 4150 : 1984	Specification for potassium chloride, technical (Second Revision)	CHD 01
87	IS 4847 : 2006	Copper salts for electroplating - Specification (Second Revision)	CHD 05
88	IS 6358 : 1971	Specification for potassium and sodium cyanides for electroplating	CHD 05
89	IS 1919 : 1982	Specification for sodium hydrosulphite (First Revision)	CHD 01
90	IS 2881 : 1984	Specification for barytes for chemical industry and oil - Well drilling (Second Revision)	CHD 01
91	IS 3205 : 1984	Specification for precipitated barium carbonate, technical (First Revision)	CHD 01
92	IS 7067 : 1973	Specification for fluoboric acid and metal fluoborates for electroplating	CHD 05
93	IS 354 : Part 6 : 1989	Resins for paints - Methods of sampling and test: Part 6 Special test methods for amino resins (Second Revision)	CHD 21
94	IS 3029 : 1964	Specification for castorseed cake for fertilizer purposes	FAD 07
95	IS 1682 : 1973	Specification for cuprous oxide, technical (Fungicidal Grade) (First Revision)	FAD 01
96	IS 999 : 1959	Methods of chemical analysis of brazing solder	MTD 34
97	IS 11783 : 1986	Specification for ferrosilicon for explosive and pyrotechnic industry	CHD 26
98	IS 8558 : 1977	Specification for neem cake for manuring	FAD 07
99	IS 10895 : 1984	Specification for copper nitrate	CHD 01
100	IS 11237 : 1985	Specification for manganese carbonate	CHD 01
101	IS 4611 : 1991	Metallic zinc powder (Zinc Dust) - Specification (Second Revision)	CHD 01
102	IS 5877 : 1971	Specification for barium sulphide, technical (Black Ash)	CHD 01
103	IS 9398 : 1987	Specification for silicon tetrachloride, technical (First Revision)	CHD 01
104	IS 228 : Part 1 : 1987	Methods for chemical analysis ofsteels: Part 1 determination ofcarbon by volumetric method (For Carbon 0.05to 2.50 Percent) (Third Revision)	MTD 34
105	IS 228 : Part 7 : 1990	Methods for chemical analysis of steels: Part 7 determination of molybdenum by alpha - Benzoinoxime method in alloy steels (For molybdenum 1 percent and not containing tungsten) (Third Revision)	MTD 34
106	IS 3186 : 1965	Methods of chemical analysis of cadmium copper	MTD 34
107	IS 8097 : 1976	Methods of chemical analysis of soft solders for jointing alumtnium and aluminium alloys	MTD 34
108	IS 54 : 1988	Specification for green oxide of chromium for paints (Second Revision)	CHD 21
109	IS 5288 : 1980	Specification for Barium Chloride (First Revision)	CHD 01
110	IS 14709 : 1999	n - Butyl acrylate - Specification	PCD 09
111	IS 5425 : Part 2 : 1984	Method of chemical analysis of misch metal: Part 2 determination of total rare earths	MTD 34
112	IS 10170 : 1982	Specification for byproduct gypsum	FAD 07
113	IS 10982 : 1984	Specification for strontium sulphate for electroplating	CHD 05
114	IS 1559 : Part 3 : 1982	Methods of chemical analysis of ferrosilicon: Part 3 determination of sulphur (First Revision)	MTD 34
115	IS 4027 : Part 3 : 1987	Methods of chemical analysis of bronzes: Part 3 determination of phosphorus â€• Volumetric method (First Revision)	MTD 34
116	IS 4027 : Part 5 : 1987	Methods of chemical analysis of bronzes: Part 5 determination of tin - Iodimetric method (First Revision)	MTD 34
117	IS 4027 : Part 7 : 1990	Methods of chemical analysis of bronzes: Part 7 determination of antimony by rhodamine B spectrophotometric method (First Revision)	MTD 34
118	IS 4027 : Part 9 : 1991	Methods of chemical analysis of bronzes: Part 9 determination of aluminium by atomic absorption spectrometric method (First Revision)	MTD 34
119	IS 6932 : Part 1 : 1973	Method of test for building limes Part 1 Determination of insoluble residue, loss on ignition, insoluble matter, silicone dioxide, ferric and aluminium oxide, calcium oxide and magnesium oxide	CED 04
120	IS 6932 : Part 2 : 1973	Method of test for building limes Determination of carbon dioxide content	CED 04
121	IS 12308 : Part 13 : 1992	Methods of chemical analysis of castiron and pigiron: Part 13 determination of magnesium by atomic absorption spectrometric method (For Magnesium Upto 0.1 Percent)	MTD 34
122	IS 4027 : Part 8 : 1991	Methods of chemical analysis of bronzes: Part 8 determination of iron (First Revision)	MTD 34
123	IS 7886 : 1997	Barium chromate for explosives and pyrotechnic industry - Specification (First Revision)	CHD 26
124	IS 12308 : Part 7 : 1991	Methods for Chemical Analysis of Cast Iron and Pig Iron: Part 7 Determination of nickel by dimethyl glyoxime (gravimetric) method(for nickel 0.5 to 36 percent)	MTD 34
125	IS 440 : 1964	Methods of chemical analysis of copper (Revised)	MTD 34
126	IS 1684 : 1994	Red oxide of iron for rubber industry - Specification (Second Revision)	PCD 13
127	IS 9407 : 1980	Specification for light magnesium oxide for rubber industry	PCD 13
128	IS 8874 : 1977	Specification for dimethylamine, technical	PCD 09
129	IS 1091 : 1985	Specification for Nitrocellulose	CHD 26
130	IS 8862 : 1978	Specification for titanium dioxide (Anatase Type) for rubber industry	PCD 13
131	IS 266 : 1993	Sulphuric acid - Specification (Third Revision)	CHD 01
132	IS 1355 : 1984	Methods of determination of the chemical composition of ash of coal and coke (First Revision)	PCD 07
133	IS 1448 : Part 34 : 1979	Methods of test for petroleum and its products - P : 34 determination of sulphur in petroleum products (Lamp Method) (Second Revision)	PCD 01
134	IS 2629 : 1985	Recommended practice for hot-dip galvanizing of iron and steel (First Revision)	MTD 24
135	IS 5158 : 1987	Specification for phthalic anhydride, technical (Second Revision)	PCD 09
136	IS 8814 : 1978	Specification for sodium metal	CHD 01

Classification Details

Certification	:
Group	:	Electronic and Telecom equipments, components and devices
Sub Group	:	Electronic components and devices
Sub Sub Group	:	Electromechanical components
Aspect	:	Product Specification

Know your standards

Basic Details/ मूल ब्यौरा

Other Details

Indian Standard

Amendment : 0

Gazette Document : 1

License : 0

Product Manual & SIT : 0

Laboratory : 0

Classification Details

Cross Reference Details

Composition

Corrigendum : 0

Cross Reference Details

Classification Details