( Group : Transport and Related Products )
Total Standards : 1113
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10000 : Part 4 : 1980 |
Methods of tests for internal combustion engines: Part 4 declaration of power, efficiency, fuel consumption and lubricating oil consumption | 1 | ---- | Download | |
| 2 | IS 10000 : Part 6 : 1980 |
Methods of tests for internal combustion engines: Part 6 recording of test results | 1 | ---- | Download | |
| 3 | IS 10000 : Part 8 : 1980 |
Methods of tests for internal combustion engines Part 8 performance tests | 0 | ---- | Download | |
| 4 | IS 10000 : Part 1 : 1980 |
Methods of tests for internal combustion engines: Part 1 glossary of terms relating to test methods | 0 | ---- | Download | |
| 5 | IS 10000 : Part 13 : 2002 |
Methods of tests for internal combustion engines: Part 13 recommendations on nature of tests required for functional changes in critical components | 1 | ---- | Download | |
| 6 | IS 10000 : Part 3 : 1980 |
Methods of tests for internal combustion engines: Part 3 measurements for testing - Units and limits of accuracy | 1 | ---- | Download | |
| 7 | IS 10000 : Part 12 : 1980 |
Methods of tests for internal combustion engines: Part 12 specimen test certificates | 0 | ---- | Download | |
| 8 | IS 10000 : Part 7 : 1980 |
Methods of tests for internal combustion, engines: Part 7 governing tests for constant speed engines and selection of engines for use with electrical generators | 2 | ---- | Download | |
| 9 | IS 10000 : Part 9 : 1980 |
Methods of tests for internal combustion engines: Part 9 endurance tests | 0 | ---- | Download | |
| 10 | IS 10000 : Part 10 : 1980 |
Methods of tests for internal combustion engines: Part 10 tests for smoke levels, limits and corrections for smoke levels for variable ,speed compression ignition engines | 0 | ---- | Download | |
| 11 | IS 10000 : Part 11 : 1980 |
Methqds of tests for internal combustion engines: Part 11 information to be supplied by the purchaser to the manufacturer and information to be supplied by the manufacturer along with the engine | 0 | ---- | Download | |
| 12 | IS 10000 : Part 2 : 1980 |
Methods of tests for internal combustion engines Part 2 standar d reference conditions | 1 | ---- | Download | |
| 13 | IS 10000 : Part 5 : 1980 |
Methods of tests for internal combustion engines: Part 5 preparation for tests and measurements for wear | 1 | ---- | Download | |
| 14 | IS 10001 : 1981 |
Performance Requirements for Constant Speed Compression ignition (diesel) engines for general purposes (up to 20 kW) | 6 | ---- | Buy | |
| 15 | IS 10002 : 1981 |
Specification for performance requirements for constant speed compression ignition (Diesel) engines for general purposes (Above 20 KW) | 3 | ---- | Buy | |
| 16 | IS 10041 : 1981 |
Glossary of terms for airline technical operations | 0 | ---- | Download | |
| 17 | IS 10063 : 1982 |
Dimensions of end fittings of rear shock absorbers for scooters and motorcycle - S | 0 | ---- | Download | |
| 18 | IS 10097 : 1982 |
Code of practice for the packaging of metal cutting tools | 1 | ---- | Download | |
| 19 | IS 10105 : 1982 |
Specification for fittings for cylinder pressure indicators for internal combustion engines | 1 | ---- | Download | |
| 20 | IS 10106 : Part 3 : Sec 3 : 1985 |
Packaging code: Part 3 ancillary materials section 3 tensional strapping | 0 | ---- | Download | |
| 21 | IS 10106 : Part 1 : Sec 4 : 1995 |
Packagingcode: Part 1 product pack - Aging section 4 package cushioning design | 0 | ---- | Download | |
| 22 | IS 10106 : Part 3 : Sec 5 : 1990 |
Packagingcode: Part 3 ancillary materials section 5 twines and cords | 0 | ---- | Download | |
| 23 | IS 10106 : Part 1 : Sec 6 : 1992 |
Packaging code: Part 1 product packaging section 6 protection against spoilage of packages and their contents by micro - Organisms, insects, mites and rodents | 0 | ---- | Download | |
| 24 | IS 10106 : Part 4 : Sec 2 : 1984 |
Packagng code: Part 4 packages section 2 paper and paper based packages | 0 | ---- | Download | |
| 25 | IS 10106 : Part 2 : Sec 2 : 1983 |
Packaging code: Part 2 packaging materials section 2 paper and paper board | 0 | ---- | Download | |
| 26 | IS 10106 : Part 2 : Sec 4 : 1986 |
Packaging code: Part 2 packaging materials section 4 fabrics | 0 | ---- | Download | |
| 27 | IS 10106 : Part 3 : Sec 1 : 1984 |
Packaging: Part 3 ancilliary code materials section 1 cushioning materials | 0 | ---- | Download | |
| 28 | IS 10106 : Part 1 : Sec 1 : 1990 |
Packaging code: Part 1 product packaging . section 1 foodstuffs and perishables | 0 | ---- | Download | |
| 29 | IS 10106 : Part 4 : Sec 4 : 1984 |
Packaging code: Part 4 packages section 4 glass containers | 0 | ---- | Download | |
| 30 | IS 10106 : Part 4 : Sec 6 : 1986 |
Packaging code: Part 4 packages section 6 fabrics/textiles | 0 | ---- | Download | |
| 31 | IS 10106 : Part 1 : 1982 |
Packaging code: Part 1 factors affecting the selection of packaging | 0 | ---- | Download | |
| 32 | IS 10106 : Part 1 : Sec 3 : 1986 |
Packaging code: Part 1 product packaging section 3 textiles, fabrics and allied products | 0 | ---- | Download | |
| 33 | IS 10106 : Part 3 : Sec 4 : 1988 |
Packaging code: Part 3 ancillary materials section 4 desiccants | 0 | ---- | Download | |
| 34 | IS 10106 : Part 1 : Sec 5 : 1990 |
Packaging code: Part 1 product packaging section 5 marking, addressing and identification | 0 | ---- | Download | |
| 35 | IS 10106 : Part 4 : Sec 1 : 1982 |
Packaging code: Part 4 packages section 1 metal containers | 0 | ---- | Download | |
| 36 | IS 10106 : Part 2 : Sec 1 : 1985 |
Packaging code: Part 2 packaging materials section 1 metals | 0 | ---- | Download | |
| 37 | IS 10106 : Part 4 : Sec 3 : 1984 |
Packaging code: Part 4 packages section 3 plastics | 0 | ---- | Download | |
| 38 | IS 10106 : Part 2 : Sec 3 : 1984 |
Packaging code: Part 2 packaging materials section 3 plastics materials | 0 | ---- | Download | |
| 39 | IS 10106 : Part 2 : Sec 6 : 1990 |
Packaging code: Part 2 packaging materials section 6 flexible laminates | 0 | ---- | Download | |
| 40 | IS 10106 : Part 1 : Sec 2 : 1986 |
Packaging code: Part 1 product packaging section 2 tobacco and tobacco products | 0 | ---- | Download | |
| 41 | IS 10106 : Part 3 : Sec 2 : 1986 |
Packaging code: Part 3 ancillary materials section 2 adhesive tapes for closing and sealing | 0 | ---- | Download | |
| 42 | IS 10106 : Part 4 : Sec 5 : 1986 |
Packaging code: Part 4 packages section 5 wood based containers | 0 | ---- | Download | |
| 43 | IS 10106 : Part 2 : Sec 5 : 1990 |
Packaging code: Part 2 packaging materials section 5 wood and plywood | 0 | ---- | Download | |
| 44 | IS 10112 : 1982 |
Code of practice for the packaging of bonded abrasive products | 0 | ---- | Download | |
| 45 | IS 10195 : 1982 |
General requirements for insulated air cargo containers | 0 | ---- | Download | |
| 46 | IS 10196 : 1982 |
Guidelines for transportation of dead body and cremated remains of human beings by air | 0 | ---- | Download | |
| 47 | IS 10222 : 1982 |
Code of practice for the packaging of nails | 0 | ---- | Download | |
| 48 | IS 10227 : 1997/ISO 6115:1988 (1 Revision) |
Fishing vessels - Trawl winches - Specification (First Revision) | 0 | ---- | Buy | |
| 49 | IS 10237 : 1982 |
Specification for DC motors for aircraft | 0 | ---- | Download | |
| 50 | IS 10240 : 1982 |
General requirements for electrical equipment for aircraft | 0 | ---- | Download | |
| 51 | IS 10241 : Part 1 : 1982 |
Specification for electrical cables for aircraft: Part 1 general requirements and tests | 0 | ---- | Download | |
| 52 | IS 10241 : Part 3 : 1987 |
Specification for electric cables for aircraft: Part 3 nyvin type electric cables | 0 | ---- | Download | |
| 53 | IS 10241 : Part 2 : 1982 |
Specification for electrical cables for aircraft: Part 2 pren type electric cables | 0 | ---- | Download | |
| 54 | IS 10250 : 1982 |
Specification for severities for environmental tests for automotive electrical equipment | 2 | ---- | Download | |
| 55 | IS 10278 : 2018 (4 Revision) |
Motorcycles - Measurement of maximum speed (Third Revision) | 0 | ---- | Download | |
| 56 | IS 10311 : 1982 |
General requirements of powered platform trucks and their acceptance criteria | 0 | ---- | Download | |
| 57 | IS 10312 : 1982 |
Safety code for powered tow trucks | 0 | ---- | Download | |
| 58 | IS 10323 : 2019 (1 Revision) |
Crank and chain wheel for moped - Specification (First Revision) | 0 | ---- | Download | |
| 59 | IS 10331 : 1982 |
Specification for fuel tap for mopeds | 0 | ---- | Download | |
| 60 | IS/ISO/IEC 10373 : Part 2 : 2015/ISO 17682:2013 |
Identification cards - Test methods - Part 2: Cards With Magnetic Stripes | 0 | ---- | Buy | |
| 61 | IS/ISO/IEC 10373 : Part 8 : 2011/ISO 18186:2011 |
Identification cards Test methods Part 8: USB-ICC | 0 | ---- | Buy | |
| 62 | IS 10407 : 1998 (2 Revision) |
Automotive vehicles - Two wheelers - Acceleration performance - Method of evaluation (Second Revision) | 0 | ---- | Download | |
| 63 | IS 10478 : 2018/ISO 6519:2015 (2 Revision) |
Diesel engines - Fuel injection pumps - Tapers for shaft ends and hubs (Second Revision) | 0 | ---- | Buy | |
| 64 | IS 10492 : 1983 |
General requirements and testing of anchor cable stoppers | 0 | ---- | Download | |
| 65 | IS 10494 : PART 1 : 2012/ISO 6966-1 : 2005 |
Aircraft ground equipment - Basic requirements: Part 1 general design requirements (First Revision) | 0 | ---- | Buy | |
| 66 | IS/ISO 105 : Part J03 : 2009/ISO 18885-2:2018 |
Textiles Tests for colour fastness Part J03: Calculation of colour differences | 0 | ---- | Buy | |
| 67 | IS/ISO 105 : Part S03 : 1993/ ISO 11893: 2011 |
Textiles Tests for colour fastness Part S03: Colour fastness to vulcanization: Open steam | 0 | ---- | Buy | |
| 68 | IS/ISO 105-P01 : 1993/ISO 23461: 2010 |
Textiles Tests for colour fastness Part P01: Colour fastness to dry heat excluding pressing | 0 | ---- | Buy | |
| 69 | IS 10515 : 1983 |
General requirements of main deck container/pallet loader for aircraft | 0 | ---- | Download | |
| 70 | IS 10517 : 2019 (1 Revision) |
Acceptance criteria for fork - Lift trucks (First Revision) | 0 | ---- | Download | |
| 71 | IS/ISO 10524 : Part 3 : 2019/ISO 26262-2:2018 (1 Revision) |
Pressure regulators for use with medical gases- Part 3: Pressure regulators integrated with cylinder valves VIPRs First Revision | 0 | ---- | Buy | |
| 72 | IS 10526 : 1996/ISO 3935:1977 (1 Revision) |
Inland Vessels - Fire - Fighting water system - Pressures (First Revision) | 0 | ---- | Buy | |
| 73 | IS 10527 : 1983/ISO 3948:1977 |
Specificatcon for pressure ranges for compressed air system for inland vessels | 0 | ---- | Buy | |
| 74 | IS 10529 : 1983 |
Guidelines for estimation of engine power for small mechanized fishing boats | 0 | ---- | Download | |
| 75 | IS 10530 : 1983 |
Guidelines for selection of fish hold insulation | 0 | ---- | Download | |
| 76 | IS 10533 : 1983 |
Specification for valve guides for internal combustion engines | 0 | ---- | Download | |
| 77 | IS 10558 : 2013 (1 Revision) |
Aluminium shore gangways - Specification (First Revision) | 0 | ---- | Download | |
| 78 | IS 10610 : 1983 |
Aircraft pressure cabin ground test connections | 0 | ---- | Download | |
| 79 | IS 10613 : 2014 (2 Revision) |
Cycles - Safety requirements for bicycles (Second Revision) | 0 | ---- | Download | |
| 80 | IS 1062 : 2014/ISO 11565:2006 (3 Revision) |
Road vehicles - Spark - Plugs - Test methods and requirements (Third Revision) | 0 | ---- | Buy | |
| 81 | IS 10628 : 1983 |
General requirements for aerospace bolts and nuts | 0 | ---- | Download | |
| 82 | IS 1063 : 1997 (2 Revision) |
Automotive vehicles - Ml4 x 1.25 spark plugs with flat seating and their cylinder head housing - Specification (Second Revision) | 1 | ---- | Download | |
| 83 | IS 10651 : 2019 (1 Revision) |
Hub axle, front for moped - Specification (First Revision) | 0 | ---- | Download | |
| 84 | IS 10652 : 2019 (1 Revision) |
Pedal assembly for moped - Specification (First Revision) | 0 | ---- | Download | |
| 85 | IS 10653 : 2019 (1 Revision) |
Hub axle, rear, for moped - Specification (First Revision) | 0 | ---- | Download | |
| 86 | IS 10682 : 1983 |
Specification for aircraft safety belts, lap type | 0 | ---- | Download | |
| 87 | IS 10694 : Part 3 : 2009 (2 Revision) |
Automotive vehicles - Rims - General requirements: Part 3 commercial vehicle rims (Second Revision) | 0 | ---- | Download | |
| 88 | IS 10694 : Part 5 : 1987 (1 Revision) |
General requirements for rims for automotive vehicles: Part 5 moped, motorcycle and motorcycle derivative rims (First Revision) | 0 | ---- | Download | |
| 89 | IS 10694 : Part 7 : 1983 |
General requirements for rims for automotive vehicles: Part 7 industrial truck rims | 0 | ---- | Download | |
| 90 | IS 10694 : Part 2 : 2009 (2 Revision) |
Automotive vehicles - Rims - General requirements: Part 2 passenger car (Second Revision) | 0 | ---- | Download | |
| 91 | IS 10694 : Part 4 : 1983 |
General requirements for rims for automotive vehicles: Part 4 scooter and scooter derivative rims | 0 | ---- | Download | |
| 92 | IS 10694 : Part 1 : 2009 (2 Revision) |
Automotive vehicles - Rims - General requirements: Part 1 nomenclature, designation, marking and measurement (First Revision) | 1 | ---- | Download | |
| 93 | IS 10694 : Part 6 : 2009 (2 Revision) |
Automotivevehicles - Rims - Generalrequirements: Part 6 rims for agricultural tractors,tillers and implements (Second Revision) | 0 | ---- | Download | |
| 94 | IS 10746 : Part 1 : 1983 |
Specification for shell and tube type marine heat exchangers: Part 1 application standard | 0 | ---- | Download | |
| 95 | IS 10746 : Part 2 : 1983 |
Specification for shell and tube type marine heat exchangers: Part 2 general requirements | 0 | ---- | Download | |
| 96 | IS 10752 : 1983 |
Dimensions and testing requirements of landing gear for mounting on semitrailers | 0 | ---- | Download | |
| 97 | IS 10766 : 2018/ISO 3842: 2006 (2 Revision) |
Road vehicles - Fifth wheels - Interchangeability (Second Revision) | 0 | ---- | Buy | |
| 98 | IS 10791 : 1983 |
Specification for control cable assembly for mopeds | 0 | ---- | Download | |
| 99 | IS 10855 : 1984 |
Specification for bucket capacities for multi - Bucket dredgers | 0 | ---- | Download | |
| 100 | IS 10858 : 1984/ISO 6217:1982 |
Identification painting and inscription code for pilot craft | 0 | ---- | Buy | |
| 101 | IS 10862 : 1984 |
Classification and basic requirements of pilot craft | 0 | ---- | Download | |
| 102 | IS 10868 : 1984 |
Data sheet for reverse/direct reduction gear box for fishing vessels | 1 | ---- | Download | |
| 103 | IS 10869 : Part 2 : 1984 |
Specification for igloo: Part 2 structural igloo assembly | 0 | ---- | Download | |
| 104 | IS 10869 : Part 1 : 1984 |
Specification for igloo: Part 1 non - Structural igloo | 0 | ---- | Download | |
| 105 | IS 10876 : 1984 |
Specification for buckles for laminated springs for railway rocling stock | 0 | ---- | Download | |
| 106 | IS 10878 : Part 1 : 1984 |
Specification for flat form springs: Part 1 design and calculation for springs made from rectangular cold - Rolled strips | 0 | ---- | Download | |
| 107 | IS 10878 : Part 2 : 1984 |
Flat - Form springs: Part 2 speciFication for springs made from rectangular cold - Rolled strips | 0 | ---- | Download | |
| 108 | IS 10880 : 2006 (1 Revision) |
Twistlocks for lifting frieght containers - Specification (First Revision) | 0 | ---- | Download | |
| 109 | IS 10881 : 1994 (1 Revision) |
Automotive vehicles - Mopeds, scooters and motorcycles method of evaluation of fuel consumption (First Revision) | 0 | ---- | Download | |
| 110 | IS 10924 : 1994 (1 Revision) |
Shipbuilding - Guidelines for selection of martne valves and cocks (First Revision) | 0 | ---- | Download | |
| 111 | IS 10943 : Part 1 : 1984 |
Specification for accommodation ladders: Part 1 up to 7 m length | 0 | ---- | Download | |
| 112 | IS 10943 : Part 2 : 1984 |
Specification for accommodation ladders: Part 2 from 7 to 30 m length | 0 | ---- | Download | |
| 113 | IS 10965 : 1984 |
Specification for valves for aircraft tyre tubes | 0 | ---- | Download | |
| 114 | IS 10966 : 1984 |
Dimensions of valve stem of aircraft tyre tube valves | 0 | ---- | Download | |
| 115 | IS 10980 : Part 2 : 2014/ISO 5855-2 : 1999 (1 Revision) |
Aerospace - MJ threads: Part 2 limit dimensions for bolts and nuts (First Revision) | 0 | ---- | Buy | |
| 116 | IS 10980 : Part 1 : 2014/ISO 5855-1 : 1999 (1 Revision) |
Aerospace - MJ threads: Part 1 general requirements (First Revision) | 0 | ---- | Buy | |
| 117 | IS 10980 : Part 3 : 2014/ISO 5855-3 : 1999 (1 Revision) |
Aerospace - MJ threads: Part 3 limit dimensions for fittings for fluid systems (First Revision) | 0 | ---- | Buy | |
| 118 | IS/ISO 10987 : 2012/ISO 21384-4 : 2020 |
EARTH-MOVING MACHINERY SUSTAINABILITY TERMINOLOGY SUSTAINABILITY FACTORS AND REPORTING | 0 | ---- | Buy | |
| 119 | IS 10992 : Part 1 : 2003/ISO 3324-1:1997 (1 Revision) |
Aircraft tyres and: Part 1 specifications (First Revision) | 0 | ---- | Buy | |
| 120 | IS 10992 : Part 2 : 2003/ISO 3324-2:1998 (1 Revision) |
Aircraft tyres and rims: Part 2 test methods for tyres (First Revision) | 0 | ---- | Buy | |
| 121 | IS/ISO/TS 10993 : Part 20 : 2006/ISO 26262-9:2018 |
Biological evaluation of medical devices Part 20 Principles and methods for immunotoxicology testing of medical devices | 0 | ---- | Buy | |
| 122 | IS 11029 : 1984 |
Specification for steering ball races for mopeds | 0 | ---- | Download | |
| 123 | IS 11076 : 1984 |
Guide for palletization of cashew kernels for export | 0 | ---- | Download | |
| 124 | IS 11086 : 2013 (1 Revision) |
Speedometer/odometer systems for automotive application - Specification (First Revision) | 0 | ---- | Download | |
| 125 | IS 11098 : 1992 (1 Revision) |
Automotive vehicles - Steering column mounted combination switches - Specification (First Revision) | 1 | ---- | Download | |
| 126 | IS 11125 : 1984 |
General requirements for plate heat exchangers for marine use | 1 | ---- | Download | |
| 127 | IS 11139 : 2019 (1 Revision) |
Adjusters for control cables for moped - Specification (First Revision) | 0 | ---- | Download | |
| 128 | IS 11159 : Part 2 : 2021/ISO 15070 : 1996 (1 Revision) |
Classification of lubricants industrial oils and related products Part 2 Family A Total loss systems | 0 | ---- | Buy | |
| 129 | IS 11165 : 1985 |
Specification for aircraft seat rails and pins | 0 | ---- | Download | |
| 130 | IS 11167 : 2011 (2 Revision) |
Aircraft ground equipment - Lower deck loader - Functional requirements (Second Revision) | 0 | ---- | Download | |
| 131 | IS 11170 : 1985 |
Specification for 1 performance requirements for constant speed compression ignition (Diesel) engines for agricultural purposes (Up To 20 KW) | 4 | ---- | Buy | |
| 132 | IS/ISO/IEC/TR 11179 : Part 2 : 2019/ISO 13216-3 : 2018 |
Information technology Metadata registries MDR Part 2: Classification | 0 | ---- | Buy | |
| 133 | IS/ISO 11197 : 2019/ISO 16304:2018 (1 Revision) |
Medical Supply Units First Revision | 0 | ---- | Buy | |
| 134 | IS 11227 : 2022/ISO 13216-1 : 1999 (1 Revision) |
GELATIN FOR SIZING OF PAPER- SPECIFICATION | 0 | ---- | Buy | |
| 135 | IS 11253 : 1985/ISO 4085:1979 |
Specification for swing derricks | 0 | ---- | Buy | |
| 136 | IS 11294 : Part 1 : 1985 |
Specification for side scuttles for inland vessels: Part 1 general requirements | 0 | ---- | Download | |
| 137 | IS 1131 : 2006 (3 Revision) |
Bicycle bottom bracket specification (Third Revision) | 1 | ---- | Download | |
| 138 | IS 1132 : 2009 (3 Revision) |
Bicycle - Bottom bracket ball cups - Specification (Third Revision) | 1 | ---- | Download | |
| 139 | IS 11339 : 1985/ISO 3926:1980 |
Dimensions for couplings for oil and fuel reception for inland vessels | 0 | ---- | Buy | |
| 140 | IS 1134 : 2004 (3 Revision) |
Bicycles bottom bracket lock ring - Specification (Third Revision) | 1 | ---- | Download | |
| 141 | IS 1135 : 2018 (6 Revision) |
Springs - Leaf springs assembly for automobiles - Specification (Sixth Revision) | 0 | ---- | Download | |
| 142 | IS 11422 : 2001 (1 Revision) |
Terms and definitions of weights of two wheeled motor vehicles (First Revision) | 0 | ---- | Download | |
| 143 | IS 11430 : 1985 |
Code of practice for the packaging of ball and roller bearings | 0 | ---- | Download | |
| 144 | IS 11431 : 1985 |
Code of practice for the packaging of electrical indicating and recording instruments | 0 | ---- | Download | |
| 145 | IS 11432 : 2002 (1 Revision) |
Terms and definitions of dimensions of two wheeled motor vehicles (First Revision) | 0 | ---- | Download | |
| 146 | IS 11436 : 1985 |
General requirements for ground handling and transport systems equipment for air cargo unit load devices | 0 | ---- | Download | |
| 147 | IS 11438 : 1985 |
Functional requirements for air cargo unit load devices transport vehicle (UTV) | 0 | ---- | Download | |
| 148 | IS 11466 : Part 1 : 1985 |
Guidelines for packing, stowage and securing of cargo inside the freight container: Part 1 general cargo | 0 | ---- | Download | |
| 149 | IS 11466 : Part 2 : 1985 |
Guidelines for packing, stowage and securing of cargo inside the freight containers: Part 2 dangerous goods | 0 | ---- | Download | |
| 150 | IS 11479 : Part 1 : 2021/ISO 9241-171 : 2008 (2 Revision) |
ANTIBACTERIAL TOILET SOAP - SPECIFICATION PART 1 SOLID CAKE (SECOND REVISION OF IS 11479) | 0 | ---- | Buy | |
| 151 | IS 11499 : 1996/ISO 4117:1993 (1 Revision) |
Air and air/land ,cargo pallets - Specification and testing (First Revision) | 0 | ---- | Buy | |
| 152 | IS 11509 : PART 3 : 2012/ISO 4548-3:1997 (1 Revision) |
Methods of test for full - Flow lubricating oil filters for internal combustion engines: Part 3 resistance to high differential pressure and to elevated temperature (First Revision) | 0 | ---- | Buy | |
| 153 | IS 11509 : PART 2 : 2012/ISO 4548-2:1997 (1 Revision) |
Methods of test for full - Flow lubricating oil filters for internal combustion engines: Part 2 element by - Pass valve characteristics (First Revision) | 0 | ---- | Buy | |
| 154 | IS 11509 : PART 1 : 2012/ISO 4548-1:1997 (1 Revision) |
Methods of test for full - Flow lubricating oil filters for internal combustion engines: Part 1 differential pressure/flow characteristics (First Revision) | 0 | ---- | Buy | |
| 155 | IS 11517 : 1985 |
Methods of test for air and air - Land cargo pallets | 0 | ---- | Download | |
| 156 | IS 11553 : 2011/ISO 4115:1997 (1 Revision) |
Air cargo equipment - Air/land pallet nets (First Revision) | 0 | ---- | Buy | |
| 157 | IS 11608 : 1986 |
Specification for signalling whistle for life saving appliances for sea - Going ships | 0 | ---- | Download | |
| 158 | IS 11641 : 1986 |
General requirements and testing of marine inflatable liferafts | 0 | ---- | Download | |
| 159 | IS 11642 : Part 1 : 1986 |
Specification for aluminium hexagonal honeycomb core: Part 1 general requirements | 0 | ---- | Download | |
| 160 | IS 11642 : Part 2 : 1986 |
Specification for aluminium hexagonal honeycomb core: Part 2 methods of tests | 0 | ---- | Download | |
| 161 | IS 11644 : 1999 (1 Revision) |
Tolerances of form and position for aerospace bolts and screws (First Revision) | 0 | ---- | Buy | |
| 162 | IS 11649 : Part 1 : 1986 |
Specification for aluminium honeycomb sandwich panel for civil aircraft floors: Part 1 general design criteria | 0 | ---- | Download | |
| 163 | IS 11649 : Part 2 : 1986 |
Specification for aluminium honeycomb sandwich panels for civil aircraft floors: Part 2 methods of tests | 0 | ---- | Download | |
| 164 | IS 11678 : 2021 (1 Revision) |
Textile Dyestuffs - Method for Determination of Strength of Indigo on Dyed Textiles (First Revision) | 0 | ---- | Download | |
| 165 | IS 11683 : 1986 |
Methods of test for industrial tractors | 0 | ---- | Download | |
| 166 | IS 11688 : 2022/ISO 13216-2:2004 (2 Revision) |
Standard Newsprint - Specification Second Revision | 0 | ---- | Buy | |
| 167 | IS 11693 : 2006/ISO 21 (1 Revision) |
Shipbuilding - Inland navigation - Cable - Lifters for stud - Link anchor chains (First Revision) | 0 | ---- | Buy | |
| 168 | IS 11694 : Part 1 : 1986/ISO 7545:1983 |
Specification for single - Lock automatic couplings for push tows for inland navigation: Part 1 general requirements | 0 | ---- | Buy | |
| 169 | IS 11694 : Part 3 : 1986/ISO 7545:1983 |
Specification for single - Lock automatic couplings for push tows for inland navigation: Part 3 type 6 couplings | 0 | ---- | Buy | |
| 170 | IS 11694 : Part 2 : 1986/ISO 7545:1983 |
Specification for single - Lock automatic couplings for push tows for inland navigation: Part 2 type a couplings | 0 | ---- | Buy | |
| 171 | IS 11757 : 1986 |
General requirements and acceptance criteria for forklift trucks with capacity from 10000 kg to 50000 kg | 0 | ---- | Download | |
| 172 | IS/ISO/IEC 11801 : Part 2 : 2017/ISO 23460: 2011 |
Information technology Generic cabling for customer premises Part 2: Office premises | 0 | ---- | Buy | |
| 173 | IS 11823 : Part 1 : 1986/ISO 7608:1985 |
Specification for couplings for disposal of oily mixture for inland vessels: Part 1 flange couplings | 0 | ---- | Buy | |
| 174 | IS 11823 : Part 3 : 1986/ISO 7608:1985 |
Specification for couplings for disposal of oily mixture for inland vessels: Part 3 adapters (Flange/end Piece) | 0 | ---- | Buy | |
| 175 | IS 11823 : Part 4 : 1986/ISO 7608:1985 |
Specification - For couplings for disposal of oily mixtures for inland vessels: Part 4 adapters (Flange/bush) | 0 | ---- | Buy | |
| 176 | IS 11823 : Part 2 : 1986/ISO 7608:1985 |
Specification for couplings for disposal of oily mixture for inland vessels: Part 2 quick release couplings | 0 | ---- | Buy | |
| 177 | IS 11827 : 2008 (2 Revision) |
Automotive vehicles - Calibration of speedometer - Method of evaluation (Second Revision) | 3 | ---- | Download | |
| 178 | IS 11838 : 1986 |
Recommendations for measurement of quality characteristics of gudgeon pins | 1 | ---- | Download | |
| 179 | IS 11852 : 2019 (3 Revision) |
Automotive vehicles - Uniform provisions concerning the approval of vehicles of categories m2, m3, N and t with regard to braking (Third Revision) | 2 | ---- | Download | |
| 180 | IS 11865 : 2006 (1 Revision) |
Automotive vehicles - Method of conducting waterproofing test (First Revision) | 0 | ---- | Download | |
| 181 | IS 11877 : 2019 (1 Revision) |
Automotive Vehicles - Maximum Speed of Automotive Vehicles - Method of Evaluation ( First Revision ) Amendment - 1 | 1 | ---- | Download | |
| 182 | IS 11891 : 2022/62281 (1 Revision) |
LUBRICATION AND OIL SEAL SYSTEM FOR DYNAMIC COMPRESSORS-SPECIFICATION (First Revision) | 0 | ---- | Buy | |
| 183 | IS/ISO 11893 : 2011/ISO 11893:2011 |
Space Systems — Programme Management — Project Organization | 0 | ---- | Buy | |
| 184 | IS 11914 : 1986 |
Glossary Of Terms For Ships' Windows | 0 | ---- | Download | |
| 185 | IS 11921 : 2020 (2 Revision) |
Automotive Vehicles — Method of Evaluation of Constant Speed Fuel Consumption ( Second Revision ) | 0 | ---- | Download | |
| 186 | IS 11939 : 1996 (1 Revision) |
Automotive vehicles - Steering control systems - Impact protection requirements and methods of measurement (First Revision) | 1 | ---- | Download | |
| 187 | IS 11948 : 2010 (2 Revision) |
Automotive vehicles - Steering effort - Method of evaluation (Second Revision) | 2 | ---- | Download | |
| 188 | IS 11965 : 2022/ ISO 9241-210:2019 (1 Revision) |
Guide for storage of Round - Headed Cabbage (First Revision) | 0 | ---- | Buy | |
| 189 | IS 11977 : 2022/ ISO 9241-410 : 2008 (1 Revision) |
Guide for ripening of Bananas (First Revision) | 0 | ---- | Buy | |
| 190 | IS 12009 : 1995 (1 Revision) |
Automotive vehicle - Safety requirements for side door of passenger cars - Recommendations (First Revision) | 1 | ---- | Download | |
| 191 | IS 1202 : 2021/ISO 10795: 2019 (1 Revision) |
Methods for testing tar and bituminous materials - Determination of specific gravity (Second Revision) | 0 | ---- | Buy | |
| 192 | IS 12025 : 1987 |
Recommendations for measurement of quality characteristics for pistons | 1 | ---- | Download | |
| 193 | IS 12043 : Part 2 : 1987 |
Specification for electrical connectors for aircraft: Part 2 tests | 0 | ---- | Download | |
| 194 | IS 12043 : Part 1 : 1987 |
Specification for electrical connectors for aircraft: Part 1 general requirements | 0 | ---- | Download | |
| 195 | IS 12044 : 1987 |
Specification for mechanically operated switches for use in aircrafts | 0 | ---- | Download | |
| 196 | IS 12056 : 1987 |
Recommendations for safety requirements for fuel tank assembly of automotive vehicles | 3 | ---- | Download | |
| 197 | IS 12098 : 1987 |
Specification for rim wheels for pneumatic tyres for animal drawn vehicles | 0 | ---- | Download | |
| 198 | IS 12105 : 2014 (1 Revision) |
Automotive Vehicles - Valves of Automotive Air Brake Systems - Method of Test (Amendment-1) | 1 | ---- | Download | |
| 199 | IS 12115 : Part 1 : 1987/ISO 7608:1985 |
Specification for couplings for disposal of sewage water for inland vessels: Part 1 flange coupling | 0 | ---- | Buy | |
| 200 | IS 12115 : Part 3 : 1987/ISO 7608:1985 |
Specification for couplings for disposal of sewage water for inland vessels: Part 3 adapters (Flange/end Piece) | 0 | ---- | Buy | |
| 201 | IS 12115 : Part 2 : 1987/ISO 7608:1985 |
Specification for couplings for disposal of sewage water for inland vessels: Part 2 quick - Release couplings | 0 | ---- | Buy | |
| 202 | IS 12115 : Part 4 : 1987/ISO 7608:1985 |
Specification for couplings for disposal of sewage water for inland vessels: Part 4 adapters (Flange/bush) | 0 | ---- | Buy | |
| 203 | IS 12133 : 1987 |
Glossary of terms and definitions for dredgers | 0 | ---- | Download | |
| 204 | IS 12134 : 1987 |
Classification of dredgers | 0 | ---- | Download | |
| 205 | IS 12156 : 2006/ISO 9089:1989 (1 Revision) |
Marine structures - Mobile offshore units - Anchor winches (First Revision) | 0 | ---- | Buy | |
| 206 | IS 12157 : 1987 |
Requirements for construction of work platform of powered industrial trucks (For Maintenance Purposes) | 0 | ---- | Download | |
| 207 | IS 12159 : 2018 (2 Revision) |
Method of evaluation of accuracy of parameters of steering geometry of automotive vehicles (Second Revision) | 0 | ---- | Download | |
| 208 | IS/ISO 12161 : 2006/ISO 12161: 2006 |
Road Vehicles - Endurance Braking Systems of Motor Vehicles and Towed Vehicles - Test Procedures | 0 | ---- | Buy | |
| 209 | IS 12218 : 2018 (1 Revision) |
Method of measurement of approach, departure and ramp angles of automotive vehicles (First Revision) | 0 | ---- | Download | |
| 210 | IS 12222 : 2011 |
Automotive vehicles - Turning circle and maneuverability requirements (First Revision) | 2 | ---- | Download | |
| 211 | IS 12233 : Part 2 : 2021/ISO 26262-3:2018 (2 Revision) |
RADIO INTERFERENCE CHARACTERSTICS OF OVERHEAD POWER LINES AND HIGH VOLTAGE EQUIPMENT PART 2 METHODS OF MEASUREMENT AND PROCEDURE FOR DETERMINING LIMITS (First Revision) | 0 | ---- | Buy | |
| 212 | IS 12264 : 1987 |
Signaling Mirror for Lifeboats and Liferafts for Sea-going Ships | 0 | ---- | Download | |
| 213 | IS 12266 : 1987 |
international shore connection for use on board ship | 0 | ---- | Download | |
| 214 | IS 12267 : Part 1 : 1987 |
Guidelines for stability for inland and harbour vessels: Part 1 decked vessels | 0 | ---- | Download | |
| 215 | IS 12268 : Part 1 : 1987/ISO 6552:1981 |
Specification for automatic steam traps for marine use: Part 1 Glossary of terms | 0 | ---- | Buy | |
| 216 | IS 12268 : Part 3 : 1989/ISO 6554:1980 |
Shipbuilding - Automatic steam traps for marine use: Part 3 face - To - Face dlMensions | 0 | ---- | Buy | |
| 217 | IS 12268 : Part 4 : 1989/ISO 6948:1981 |
Shipbuilding - Automatic steam traps for marine use: Part 4 performance test | 0 | ---- | Buy | |
| 218 | IS 12268 : Part 2 : 1988/ISO 6704:1982 |
Specification for automatic steam traps for marine use: Part 2 classification | 0 | ---- | Buy | |
| 219 | IS 12268 : Part 5 : 1987/ISO 6553:1980 |
Specification for automatic steam traps for mar - Ine use: Part 5 marking | 0 | ---- | Buy | |
| 220 | IS 12351 : 1988 |
Specification for coupling ball for caravans and light trailers | 0 | ---- | Buy | |
| 221 | IS 12352 : 1988 |
Specification for fuel injection pump mounting bolts | 0 | ---- | Download | |
| 222 | IS 12375 : Part 10 : 2023/ ISO 23462: 2014 |
Implants for surgery - Partial and total hip-joint prostheses Part 10 Determination of resistance to static load of modular femoral heads | 0 | ---- | Buy | |
| 223 | IS 12404 : 1988 |
Specification for couplings for driving fuel injection pumps | 0 | ---- | Download | |
| 224 | IS 12406 : 2021/ISO 26262-1:2018 (2 Revision) |
Medium density fibre boards for general purpose - Specification | 0 | ---- | Buy | |
| 225 | IS 12426 : 1988 |
Code of practice - For wrapping and packing of bicycle components and spare parts | 0 | ---- | Download | |
| 226 | IS 12452 : 1988 |
Code of practice for packaging of microscopes for export | 0 | ---- | Download | |
| 227 | IS 12455 : 1988 |
Performance requirements of aircooled spark ignition automotive engines | 0 | ---- | Download | |
| 228 | IS 12460 : 1988 |
Automotive vehicles - Transmission systems - Manual control sequence in automatic transmissions - Recommendations | 1 | ---- | Download | |
| 229 | IS 12462 : 1988/ISO 6965:1982 |
Functional requirements for self - Propelled gantry for lifting air cargo containers and outsize cargoes | 0 | ---- | Buy | |
| 230 | IS 12474 : 1988 |
Bicycle Steering Head Assembly (r Type) | 1 | ---- | Download | |
| 231 | IS 12499 : 1988 |
Specification for two stage, 0.5 litre diesel fuel filters | 0 | ---- | Download | |
| 232 | IS 12500 : 1988 |
Specification for 0.2 litre diesel fuel filters | 0 | ---- | Download | |
| 233 | IS 12508 : 2013 (1 Revision) |
Electric Tachometer for Automotive Vehicles — Specification | 0 | ---- | Download | |
| 234 | IS 12511 : Part 1 : 2004 (1 Revision) |
Springs - Disc spring: Part 1 design calculation (First Revision) | 0 | ---- | Download | |
| 235 | IS 12511 : Part 2 : 2004 (1 Revision) |
Springs - Disc spring: Part 2 specification (First Revision) | 0 | ---- | Download | |
| 236 | IS 12524 : 1988 |
General requirements for main deck baggage container loader | 0 | ---- | Download | |
| 237 | IS 12535 : Part 1 : 1988 |
Automotive vehicles - Transmission systems - Glossary: Part 1 general definitions | 0 | ---- | Download | |
| 238 | IS 12535 : Part 3 : 1991 |
Automotive vehicles - Transmission systems - Glossary: Part 3 drive axles definitions | 0 | ---- | Download | |
| 239 | IS 12535 : Part 2 : 1991 |
Automotive vehicles - Transmission systems - Glonssary: Part 2 universal joints and driveshafts | 0 | ---- | Download | |
| 240 | IS 12546 : 1988 |
Basic safety requirements for air cargo loading equipment | 0 | ---- | Download | |
| 241 | IS 12559 : 1989 |
General requirements for self - Propelled conveyor - Belt loader | 0 | ---- | Download | |
| 242 | IS 12587 : 1989 |
Automotive vehicles - Transmission system - Gear arrangement - Recommendations | 0 | ---- | Download | |
| 243 | IS 12588 : 2014 (1 Revision) |
Automotive vehicles - Oil and air assisted pressure gauges - Specification (First Revision) | 0 | ---- | Download | |
| 244 | IS 1260 : Part 2 : 2020/ISO 780 : 2015 (4 Revision) |
Packaging — Distribution Packaging — Graphical Symbols for Handling and Storage of Packages Part 2 General Goods ( Fourth Revision ) | 0 | ---- | Buy | |
| 245 | IS 1260 : Part 1 : 1973 (1 Revision) |
Pictorial Marking for Handling and Labelling of Goods: Part 1 Dangerous Goods (First Revision) | 0 | ---- | Download | |
| 246 | IS 12603 : 1988 |
General requirements for future wide - Body aircraft cargo - Systems and compartments - (Intermodal) | 0 | ---- | Download | |
| 247 | IS 12604 : 2004 (1 Revision) |
Road vehicles - Drawbar couplings - Interchangeability (First Revision) | 0 | ---- | Buy | |
| 248 | IS 12605 : 2004/ISO 3853: 1994 (1 Revision) |
Road vehicles - Towing vehicle coupling device to tow caravans or light trailers - Mechanical strength test (First Revision) | 0 | ---- | Buy | |
| 249 | IS 12606 : 1989 |
Transport tractors and trailers - Static load on ball couplings | 0 | ---- | Download | |
| 250 | IS 12648 : 1989 |
Automotive vehicles - End mountings of shock absorbers - Dimensions and tests | 0 | ---- | Download | |
| 251 | IS 12693 : 1989/ISO 5780: 1967 |
Shipbuilding - Positioning of Ships' Round Windows - Guidelines | 0 | ---- | Buy | |
| 252 | IS 12695 : 1989 |
Automotive vehicles -Three wheeled vehicles - Determination of centre of gravity | 0 | ---- | Download | |
| 253 | IS 12712 : 1989/ISO 7255: 1985 |
Shipbuilding - Means of active control of ships manoeuvring - Glossary of terms | 0 | ---- | Buy | |
| 254 | IS 12719 : 1989/ISO 7825:1985 |
Ship building - Deck machinery - General requirements | 0 | ---- | Buy | |
| 255 | IS 12793 : 2012 (1 Revision) |
Motorcycles - Measurement method for location of centre of gravity (First Revision) | 0 | ---- | Download | |
| 256 | IS 12794 : 1989 |
Shipbuilding - Steam traps - Guidelines for selection | 0 | ---- | Download | |
| 257 | IS 12807 : 1989 |
Drawbar eyes for mechanical connections between towing vehicles and trailers - Specification | 0 | ---- | Download | |
| 258 | IS 1282 : 2018 (2 Revision) |
Bicycle - Bicycle cotter pins, washers and nuts - Specification (Second Revision) | 0 | ---- | Download | |
| 259 | IS 12821 : 2017 (1 Revision) |
Automotive vehicles - Braking system, tube connections - Dimensions (First Revision) | 0 | ---- | Download | |
| 260 | IS 1283 : 1995 (2 Revision) |
Bicycles - Free - Wheels - Specification (Second Revision) | 1 | ---- | Download | |
| 261 | IS 12832 : 2010 (1 Revision) |
Automotive vehicles - Interior noise - Method of measurement and requirements (First Revision) | 1 | ---- | Download | |
| 262 | IS 12842 : 1989 |
Tie - Down fittings - Aircraft net assemblies - Specification | 0 | ---- | Download | |
| 263 | IS/ISO/TR 12859 : 2009/ISO/TR 12859 : 2009 |
Intelligent transport systems - System architecture - Privacy aspects in its standards and systems | 0 | ---- | Buy | |
| 264 | IS 12864 : Part 2 : 1989 |
Packaging export of thermosflasks for - Export - Code of practice: Part 2 glass refills | 0 | ---- | Download | |
| 265 | IS 12864 : Part 1 : 1989 |
Packaging of thermosflasks for export - Code of practice: Part 1 complete flask | 0 | ---- | Download | |
| 266 | IS 12869 : Part 1 : 2022/ISO 12614-2:2021 (2 Revision) |
Methods for determination of viscosity and viscometric fixed points of glass Part 1 Standard test methods (First Revision) | 0 | ---- | Buy | |
| 267 | IS 12869 : Part 2 : 2022/ISO 12614-3:2021 (2 Revision) |
Methods for determination of viscosity and viscometric fixed points of glass Part 2 Determination of softening point (First Revision) | 0 | ---- | Buy | |
| 268 | IS 12884 : 2015 (1 Revision) |
Automotive vehicles - Braking systems, rubber boots for brake wheel cylinders - Performance requirements (First Revision) | 0 | ---- | Download | |
| 269 | IS 12902 : 1990/ISO 7646:1986 |
Commercial vehicles and buses - Gearbox flanges - Type A | 0 | ---- | Buy | |
| 270 | IS 12903 : 1990/ISO 7647:1986 |
Commercial vehicles and buses - Gearbox flanges - Type S | 0 | ---- | Buy | |
| 271 | IS 12904 : 1990/ISO 7648:1987 |
Flywheel housings for reciprocating internal combustion engines - Nominal dimensions and tolerances | 0 | ---- | Buy | |
| 272 | IS 12905 : 1990/ISO 7653:1985 |
Commercial Vehicles-couplings Between Power Take-offs (PTO's) and Ancillary Driven Units | 0 | ---- | Buy | |
| 273 | IS 12963 : 1990 |
Inland vessels - Dredgers - Floaters - Specification | 1 | ---- | Download | |
| 274 | IS 12972 : 1990/ISO 7707:1986 |
Commercial road vehicles - Connections for rear - Mounted power take - Offs (PTO) | 0 | ---- | Buy | |
| 275 | IS 12973 : 1990/ISO 7804:1985 |
Commercial road vehicles - Side openings for truck power take - Offs (PTO) | 0 | ---- | Buy | |
| 276 | IS 12978 : 2006/ISO 8667:1992 (1 Revision) |
Commercial vehicles and buses - Cross - Tooth gearbox flanges, type T (First Revision) | 0 | ---- | Buy | |
| 277 | IS 12996 : 1990 |
Internal combustion engines radiator pressure caps - Specification | 0 | ---- | Download | |
| 278 | IS 13004 : Part 2 : 1990/ISO 4127(Pt 2):1980 |
Inland vessels - Fairleads - Specification: Part 2 roller fairleads | 1 | ---- | Buy | |
| 279 | IS 13004 : Part 1 : 1990/ISO 4127(Pt 1):1979 |
Inland vessels - Fairleads - Specification: Part 1 two - Lip fairleads | 0 | ---- | Buy | |
| 280 | IS 13013 : Part 1 : 1990 |
Code of practice for packaging thermal insulation materials: Part 1 slabs, mattresses and pipesections made of fibrous materials | 0 | ---- | Download | |
| 281 | IS 13016 : 1991 |
Internal combustion engines - Radiator drain cocks - Specification | 0 | ---- | Download | |
| 282 | IS 13018 : 1990 |
Internal combustion of test for pressure engines - Method charged engines | 0 | ---- | Download | |
| 283 | IS 13029 : 1991 |
Internal combustionengines - setting ignition timing in spark ignition engines - Code of practice | 0 | ---- | Download | |
| 284 | IS 13050 : 1991 |
Internal combustion engines - Valve seat inserts - Specification | 0 | ---- | Download | |
| 285 | IS 13051 : 1991 |
Internal combustion engines radiator fans - Specification | 0 | ---- | Download | |
| 286 | IS 13052 : 1991 |
Internal combustion engines - Cylinder liners - Quality characteristics | 0 | ---- | Download | |
| 287 | IS 13086 : 2021/ISO 25862:2009 (2 Revision) |
Pneumatic Fluid Power - Cylinders, 1 000 kPa ( 10 bar ) Series - Mounting Dimensions of Rod-end Spherical Eyes ( Second Revision ) | 0 | ---- | Buy | |
| 288 | IS 13090 : 2018 |
Automotive vehicles - Commercial vehicles - Clutch housings - Dimensions (First Revision) | 0 | ---- | Buy | |
| 289 | IS 13111 : 1991 |
Automotive vehicles garage equipments - Terms and definitions | 0 | ---- | Download | |
| 290 | IS 13112 : 1991 |
Cargo securing systems for general purpose freight containers general requirements | 0 | ---- | Download | |
| 291 | IS 13135 : 2016/ISO 4082:1981 |
Road vehicles - Motor vehicles - Flasher units (First Revision) | 0 | ---- | Buy | |
| 292 | IS/ISO/TS 13140 : Part 2 : 2012/ISO/TS 13140 : Part 2 : 2012 |
Electronic fee collection - Evaluation of on - Board and roadside equipment for conformity to iso/ts 13141: Part 2 abstract test suite | 0 | ---- | Buy | |
| 293 | IS/ISO/TS 13140 : Part 1 : 2011/ISO/TS 13140 : Part 2 : 2012 |
Electronic fee collection - Evaluation of on - Board and roadside equipment for conformity to ISO/TS 13141: Part 1 test suite structure and test purposes | 0 | ---- | Buy | |
| 294 | IS/ISO/TS 13143 : Part 1 : 2011/ISO/TS 13143 : Part 1 : 2011 |
Electronic fee collection - Evaluation of on - Board and roadside equipment for conformity to ISO/TS 12813: Part 1 test suite structure and test purposes | 0 | ---- | Buy | |
| 295 | IS/ISO/TS 13143-2 : 2011/ISO/TS 13143-2 : 2011 |
Electronic fee collection - Evaluation of on - Board and roadside equipment for conformity to ISOTS 12813: Part 2 abstract test suite | 0 | ---- | Buy | |
| 296 | IS 13154 : 2015 (1 Revision) |
Automotive vehicles - Tyres for agricultural vehicles and their trailers - Specification (First Revision) | 0 | ---- | Download | |
| 297 | IS 13161 : Part 1 : 1991 |
Shipbuilding - Noise levels onboard ships: Part 1 glossary of terms | 0 | ---- | Download | |
| 298 | IS 13161 : Part 3 : 1992 |
Shipbuilding - Noise levels onboard ships: Part 3 maximum noise levels - Code of practice | 0 | ---- | Download | |
| 299 | IS 13161 : Part 5 : 1991/ISO 4869: 1981 |
Shipbuilding - Noise levels onboard ship: Part 5 requirements for protection | 0 | ---- | Buy | |
| 300 | IS 13161 : Part 2 : 1992 |
Shipbuilding - Noise levels onboard ships: Part 2 code of measurement | 0 | ---- | Download | |
| 301 | IS 13161 : Part 4 : 1991 |
Shipbuilding - Noise levels onboard ships: Part 4 noise exposure limits | 0 | ---- | Download | |
| 302 | IS 13161 : Part 6 : 1991 |
Shipbuilding - Noise levels onboard ships: Part 6 guidelines for controlling noise exposure | 0 | ---- | Download | |
| 303 | IS 13191 : 2019/ISO 8317 : 2015 (1 Revision) |
Child - Resistant packaging - Requirements and testing procedures for reclosable packages (First Revision) | 0 | ---- | Buy | |
| 304 | IS 13214 : Part 1 : 2020/ISO 7250-1 : 2008 (2 Revision) |
Basic Human Body Measurements for Technological Design Part 1 Body Measurement Definitions and Landmarks ( Second Revision ) | 0 | ---- | Buy | |
| 305 | IS 13214 : Part 3 : 2019/ISO 7250-3:2015 |
Basic human body measurements for technological design: Part 3 worldwide and regional design ranges for use in product standards | 0 | ---- | Buy | |
| 306 | IS 13224 : 1991 |
Automotive vehicles - Hydraulic braking systems - Master cylinder performance requirements | 1 | ---- | Download | |
| 307 | IS 13226 : 1991 |
Automotive vehicles - Resistances in starter motorcircuits - Methods of measurement | 0 | ---- | Download | |
| 308 | IS 13243 : 2014 (1 Revision) |
Automotive vehicles - Commercial vehicles - Attachments on hubs for wheels - Dimensions (First Revision) | 0 | ---- | Download | |
| 309 | IS 13249 : 2014 (1 Revision) |
Automotive vehicles - Braking systems - Rubber seal for disc brake cylinder - Performance requirements (First Revision) | 0 | ---- | Download | |
| 310 | IS 13259 : 1992/ISO 7717:1985 |
Aircrafttow tractors - Performance requirements | 0 | ---- | Buy | |
| 311 | IS 13269 : 1991 |
Aircraft - Single - Hole and triple - Hole mounting (Class 3) liever - Operated manual switches - Dimensions | 0 | ---- | Download | |
| 312 | IS 13284 : 1992 |
Automotive vehicles - Drawbar couplings and eyes for hinged drawbars - Method of test for strength | 0 | ---- | Buy | |
| 313 | IS 13288 : Part 2 : 2020/ISO 1496-2 : 2018 (3 Revision) |
Series 1 Freight Containers — Specification and Testing Part 2 Thermal Containers ( Third Revision ) | 0 | ---- | Buy | |
| 314 | IS 13288 : Part 4 : 1993/ISO 1496-4:1991 |
Series 1 freight containers - Specification and testing part 4 non-Pressurized containers for dry bulk | 1 | ---- | Buy | |
| 315 | IS 13288 : Part 5 : 2020/ISO 1496-5 : 2018) (2 Revision) |
Series 1 Freight Containers — Specification and Testing Part 5 Platform and Platform-based Containers ( Second Revision ) | 0 | ---- | Buy | |
| 316 | IS 13296 : 1992 |
Aircraft - Performance requirements for lever operated manual switches (Class 3) - Specification | 0 | ---- | Buy | |
| 317 | IS 13302 : Part 1 : 2018 (2 Revision) |
Industrial trucks - Verification of stability: Part 1 rough - Terrain trucks with mast (Second Revision) | 0 | ---- | Buy | |
| 318 | IS 13302 : Part 2 : 2018 |
Industrial trucks - Verification of stability: Part 2 rough - Terrain variable - Reach trucks (Second Revision) | 0 | ---- | Download | |
| 319 | IS 13309 : 1992 |
Aircraft - Performance requirements for lever operated manual switches (Class 1 And 2) - Specification | 0 | ---- | Buy | |
| 320 | IS 13313 : 1991 |
Automotive vehicles - Electrical wiring - Colour coding | 0 | ---- | Download | |
| 321 | IS 13327 : 1992 |
Automotive vehicles - Anchorages for towing ropes, cables or bars - Specification | 0 | ---- | Buy | |
| 322 | IS 13353 : 1992 |
Automotive vehicles - Garage equipments - Technical parameters | 0 | ---- | Download | |
| 323 | IS 13360 : Part 4 : Sec 1 : SubSec 2 : 2018/ISO 16964: 2019 |
Plastics - Methods of Testing - Part 4 : Rheological Properties - Section 1 : Determination of the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR) of Thermoplastics | 0 | ---- | Buy | |
| 324 | IS 13363 : 2017 (1 Revision) |
Automotive vehicles - Air brake systems - Performance requirements for drain valves (First Revision) Amendment - 1 | 1 | ---- | Download | |
| 325 | IS 13389 : 1992 |
Road vehicles - Passenger cars - Moving barrier rear collision test method | 0 | ---- | Buy | |
| 326 | IS 13390 : 1992 |
Road vehicles - Frontal fixed barrier collision test method | 0 | ---- | Buy | |
| 327 | IS 13391 : 2007/ISO 6813: 1998 (1 Revision) |
Road vehicles - Collision classification - Terminology (First Revision) | 0 | ---- | Buy | |
| 328 | IS 13431 : 1992 |
Shipbuilding - Design, Fabrication, Installation and Testing of Ships' Lubricating Oil System - Code of Practice | 0 | ---- | Download | |
| 329 | IS 13453 : 1994 (1 Revision) |
Automotive vehicles - Braking systems - Method of test on brake dynamometer for two and three wheelers (First Revision) | 1 | ---- | Download | |
| 330 | IS 13460 : 2005 (1 Revision) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 12 s (Supplementary) for vehicles with 12 V nominal supply voltage (First Revision) | 0 | ---- | Buy | |
| 331 | IS 13461 : 2005 (1 Revision) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 12 N (Normal) for vehicles with 12 V nominal supply voltage (First Revision) | 0 | ---- | Buy | |
| 332 | IS 13476 : 2006 (1 Revision) |
Automotive vehicles - Mechanical steering gear - Methods of test (First Revision) | 0 | ---- | Download | |
| 333 | IS 13491 : 2005 (1 Revision) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 24 N (Normal) for vehicles with 24 V nominal supply voltage (First Revision) | 0 | ---- | Buy | |
| 334 | IS 13492 : 1992 |
Automotive vehicles - Two wheelers - Method of evaluation of brake pedal strength requirements | 1 | ---- | Download | |
| 335 | IS 13499 : 2005/ISO 3731:2003 (1 Revision) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - 7 - Pole connector type 24 S (Supplementary) for vehicles with 24 V nominal supply voltage (First Revision) | 0 | ---- | Buy | |
| 336 | IS 1350 : Part 2 : 2022 (3 Revision) |
Method of test for coal and coke : Part 2 determination of gross calorific value (Third Revision) | 0 | ---- | Download | |
| 337 | IS 1350 : Part 3 : 2022/ISO 18885-1:2017 (2 Revision) |
Methods of test for coal and coke : Part 3 determination of total sulphur - Eschka method (Second Revision) | 0 | ---- | Buy | |
| 338 | IS 13506 : 2013 (1 Revision) |
Automotive vehicles - Method of test for articulation (First Revision) | 1 | ---- | Download | |
| 339 | IS 13509 : 1992 |
Automotive vehicles - Towing vehicles - Mounting of electrical connections on rear cross members | 0 | ---- | Download | |
| 340 | IS 13531 : 2005 (1 Revision) |
Automotive tyres - Tyre - Retreading materials for mould cure process (First Revision) | 0 | ---- | Download | |
| 341 | IS 13544 : 1992 |
Trailers - Mounting of ball bearing turn table - Dimensions | 0 | ---- | Download | |
| 342 | IS 13579 : 1992 |
Transport trailers - Methods of test | 0 | ---- | Download | |
| 343 | IS 13594 : 1992 |
Shipbuilding - Galley pantry and scullery equipments - General requirements | 0 | ---- | Download | |
| 344 | IS 13599 : 2014 (1 Revision) |
Automotive vehicles - Instrument systems - Temperature gauges - Electrical andElectronic type - Specification (First Revision) | 0 | ---- | Download | |
| 345 | IS 13602 : 2013 (1 Revision) |
Automotive vehicles - Instrument systems - Temperature gauges mechanical types - Specification (First Revision) | 0 | ---- | Download | |
| 346 | IS 13603 : 2014 (1 Revision) |
Automotive vehicles - Air brake systems - Performance requirements for brake chamber (First Revision) Amendment - 1 | 1 | ---- | Download | |
| 347 | IS 13604 : 2014 (1 Revision) |
Automotive vehicles - Air brake systems - Performance requirements for dual brake valve (First Revision) Amendment - 1 | 1 | ---- | Download | |
| 348 | IS 13608 : 1993 |
Sheet pallets - Specification | 0 | ---- | Download | |
| 349 | IS 13609 : 1992 |
Pallets - Quality of timber - Guidelines | 0 | ---- | Download | |
| 350 | IS 13646 : 2018 (1 Revision) |
Automotive vehicles ? Instrument systems - Pressure gauges electrical / electronic type ? specification (First Revision) | 0 | ---- | Download | |
| 351 | IS 13654 : 1993 |
Automotive vehicles - Instrument systems - Electrical speedometer performance requirements | 1 | ---- | Download | |
| 352 | IS 13664 : 1993 |
Poly - Pallets for bag storage godowns - Specification | 2 | ---- | Download | |
| 353 | IS 13686 : 1993 |
Internal combustion engines radiators - Methods of test | 0 | ---- | Download | |
| 354 | IS 13687 : 1993 |
Internal combustion engines - Radiators - Heat dissipation performance - Method of test | 0 | ---- | Download | |
| 355 | IS 13697 : 1993 |
Series 1 freight containers - Interface connections for tank containers | 1 | ---- | Download | |
| 356 | IS 13698 : Part 1 : 1993/ISO 9711-1:1990 |
Freight containers - Information related to containers on board vessels: Part 1 bay plan system | 0 | ---- | Buy | |
| 357 | IS 13699 : 1993/ISO 10374:1991 |
Freight containers - Automatic identification | 1 | ---- | Buy | |
| 358 | IS 13708 : Part 1 : 2014/ISO 8729-1:2010 |
Ships and marine technology - Marine radar reflectors: Part 1 passive type (Second Revision) | 0 | ---- | Buy | |
| 359 | IS 13708 : Part 2 : 2014/ISO 8729-2:2009 (2 Revision) |
Ships and marine technology - Marine radar reflectors: Part 2 active type (Second Revision) | 0 | ---- | Buy | |
| 360 | IS 13731 : 2003 (1 Revision) |
Freight containers - Container equipment data exchange (Cedex) - General communication codes (First Revision) | 0 | ---- | Download | |
| 361 | IS 13749 : 2009 (1 Revision) |
Automotive vehicles - Procedure for determining the "H" point and the torso angle for 50th percentile adult male in seating positions of motor vehicles | 0 | ---- | Download | |
| 362 | IS 13779 : 2020/ISO/TS 18614 : 2016 (2 Revision) |
ac STATIC WATTHOUR METERS CLASS 1 AND 2-Specefication | 0 | ---- | Buy | |
| 363 | IS 13804 : 1993 |
Inland vessels - Sheaves for dredgers - Dimensions | 0 | ---- | Download | |
| 364 | IS 13823 : 1993 |
Guidelines for palletization - General cargo | 0 | ---- | Download | |
| 365 | IS 13824 : 1993 |
Internal combustion engines - Method of verification of emission of crankcase gases for vehicles powered with four stroke spark ignition engines | 0 | ---- | Download | |
| 366 | IS 13835 : PART 1 : 2011/ISO 461-1 : 2003 (1 Revision) |
Aircraft - Connectors for ground electrical supplies: Part 1 design, performance and test requirements (First Revision) | 0 | ---- | Buy | |
| 367 | IS 13835 : Part 2 : 2012/ISO 461-2 : 1985 (1 Revision) |
Aircraft - Connectors for ground electrical supplies: Part 2 dimensions (First Revision) | 0 | ---- | Buy | |
| 368 | IS 13848 : 1993 |
Inland vessels - Rubber fenders - Specification | 0 | ---- | Download | |
| 369 | IS 13908 : 1993 |
Aircraft unit load devices - Loading and securing cargo - Guidelines | 1 | ---- | Download | |
| 370 | IS 13930 : 1994 |
Shipbuilding - Ships' main engine fresh water cooling system - Code of practice | 0 | ---- | Download | |
| 371 | IS 13931 : Part 2 : 1993 |
Automotive vehicles - stoplight switches: Part 2 methods of test | 1 | ---- | Download | |
| 372 | IS 13931 : Part 1 : 1993 |
Automotive vehicles - Stoplight switches: Part 1 specification | 0 | ---- | Download | |
| 373 | IS 13941 : 1994 |
.automotivevehicles - Wheel fasteners andhubcaps - General requirements | 1 | ---- | Download | |
| 374 | IS 13942 : Part 1 : 2019 (1 Revision) |
Automotive Vehicles - External Projection Part 1 Performance Requirements for M1 Category of Vehicles ( First Revision ) | 2 | ---- | Download | |
| 375 | IS 13943 : 2017 (1 Revision) |
Automotive vehicles - Wheel guards for vehicles of m1 category - Performance (First Revision) | 1 | ---- | Download | |
| 376 | IS 13971 : Part 2 : 1994 |
Rough terrain fork lift trucks - Code of practice for safety: Part 2 general requirements | 0 | ---- | Buy | |
| 377 | IS 13971 : Part 1 : 1994 |
Rough terrain fork lift trucks - Code of practice for safety: Part 1 application, operation and maintenance | 0 | ---- | Buy | |
| 378 | IS 13988 : 2014 (2 Revision) |
Automotive vehicles - Starting gradeability - Method of measurement and requirement (Second Revision) | 0 | ---- | Download | |
| 379 | IS 14140 : 1994 |
Shipbuilding - Ships' Main Engine Fuel Oil Piping System - Code of Practice | 0 | ---- | Download | |
| 380 | IS 14141 : 1994 |
Automotive vehicles - Electrical windshield washing systems - Performance requiremeNts | 0 | ---- | Download | |
| 381 | IS 14171 : 1994 |
Inland vessels - Bellows for dredgers - Specification | 0 | ---- | Download | |
| 382 | IS 14208 : 2018/ISO 3676 (1 Revision) |
Packaging - Complete , Filled transport packages and unit loads - unit load dimensions (first Revision) | 0 | ---- | Buy | |
| 383 | IS 14210 : 1994 |
Automotive vehicles rear view mirrors - Specification | 0 | ---- | Download | |
| 384 | IS 14221 : 1995 |
Automotive vehicles retro - Reflective sheets and tapes - Specification | 0 | ---- | Download | |
| 385 | IS 14221 : Part 1 : 2015 (1 Revision) |
Retro-Reflective Tapes - Specification Part 1 Bicycles ( First Revision ) | 0 | ---- | Download | |
| 386 | IS 14224 : 1995 |
Automotive vehicles - Registration plate - Requirements | 0 | ---- | Download | |
| 387 | IS 14225 : 2017 (1 Revision) |
Automotive vehicles - Locking systems and door retention components - General requirements (First Revision) | 2 | ---- | Download | |
| 388 | IS 14226 : 1995 |
Automotive vehicles - Hood latch system i - Method of test | 1 | ---- | Download | |
| 389 | IS 14233 : 1995 |
Packaging - Pharmaceutical products - Child resistant tamper - proof packaging for solid dosage forms - Code of practice | 0 | ---- | Download | |
| 390 | IS 14238 : 1995 |
Inland vessels - Selection of rubber i fendbrs for berthing structures code of practice | 0 | ---- | Download | |
| 391 | IS 14270 : Part 4 : 1997 |
Shipbuilding - Pyrotechnic distress signals for ships: Part 4 white flare signal - Specification | 0 | ---- | Download | |
| 392 | IS 14270 : Part 2 : 1997 |
Shipbuilding - Pyrotechnic distress signals for ships: Part 2 red flare parachute signal - Specification | 0 | ---- | Download | |
| 393 | IS 14270 : Part 5 : 1997 |
Shipbuilding - Pyrotechnic distress signals for ships: Part 5 white flare parachute signal - Specification | 0 | ---- | Download | |
| 394 | IS 14270 : Part 8 : 1997 |
Shipbuilding - Pyrotechnic distress signals for ships: Part 8 orange smoke signal - Specification | 0 | ---- | Download | |
| 395 | IS 14270 : Part 1 : 1995 |
Shipbuilding pyrotechnic distress signals for ships: Part 1 general requirements | 0 | ---- | Download | |
| 396 | IS 14270 : Part 3 : 1997 |
Shipbuilding - Pyrotechnic distress signals for ships: Part 3 red star rocket signal - Specification | 0 | ---- | Download | |
| 397 | IS 14272 : 2011 (1 Revision) |
AUTOMOTIVE VEHICLES — TYPES — TERMINOLOGY ( First Revision ) | 4 | ---- | Download | |
| 398 | IS 14272 : Part 1 : 1995 |
Automotive vehicles - Types - Terminology: Part 1 three and four wheelers | 0 | ---- | Download | |
| 399 | IS 14273 : 1999 |
Automotive vehicles - Exhaust emissions - Gaseous pollutants from vehicles fitted with compression ignition engines - Method of measurement | 0 | ---- | Download | |
| 400 | IS 14307 : Part 1 to 4 : 1995/ISO 3261: 1975 |
Shipbuilding - Deck covering,thermal and acoustic insulation materials methods of tests | 0 | ---- | Buy | |
| 401 | IS 14317 : 1995 |
Shipbuilding - Preformed rigid polyisocyanurate foam thermal insulating materials - Specification | 0 | ---- | Download | |
| 402 | IS 14328 : 1995 |
Packaging - Export packaging of diesel engines upto 500kg - Code of pracitice | 0 | ---- | Download | |
| 403 | IS 14335 : 1996 |
Shipbuilding - Mineral fibre marine board for thermal insulation - Specification | 0 | ---- | Download | |
| 404 | IS 14336 : 1996 |
Shipbuilding - Deck covering materials - Specification | 0 | ---- | Download | |
| 405 | IS 14337 : 1996 |
Shipbuilding - Mineral fibre resin bonded slabs - Specification | 0 | ---- | Download | |
| 406 | IS 14346 : Part 2 : 1996 |
Automotive vehicles - Passenger cars verification of drivers direct field of view (Part 2) Method of test | 0 | ---- | Download | |
| 407 | IS 14346 : Part 1 : 1996 |
Automotive Vehicles - Passenger Cars - Verification of Drivers Direct Field of View - Part 1 : Vehicle Positioning for Static Measurement | 0 | ---- | Download | |
| 408 | IS 14363 : 2018/ISO 11243:2016 (2 Revision) |
Cycles - Luggage carriers for bicycles - Requirements and test methods (Second Revision) | 0 | ---- | Buy | |
| 409 | IS 14380 : 1996 |
Automotive vehicles - Ignition coils for magneto ignition systems - Specification | 1 | ---- | Download | |
| 410 | IS 14381 : 1996 |
Automotive vehicles - Electrical circuits - Recommended graphical symbols | 0 | ---- | Download | |
| 411 | IS 14382 : 2014 (1 Revision) |
Automotive vehicles - Speed limitation devices - Specification (First Revision) | 0 | ---- | Download | |
| 412 | IS 14388 : 1996 |
Aircraft - Lower - Deck turn table container - Dolley functional requirements | 0 | ---- | Download | |
| 413 | IS 14393 : 1996/ISO 6044: 1985 |
Shipbuilding - Derrick boom heel fittings - Main dimensions | 0 | ---- | Buy | |
| 414 | IS 14431 : 1997 |
Airport passenger bus - Functional requirements | 0 | ---- | Download | |
| 415 | IS 14432 : 1997 |
Air craft - Ambulift - Functional requirements | 0 | ---- | Download | |
| 416 | IS 14449 : 1997/ISO 7606:1988 |
Inland vessels - Draught scale - Specification | 0 | ---- | Buy | |
| 417 | IS 1448 : Part 72 : 2023 (1 Revision) |
Methods of test for petroleum and its products Part 72 volatility test of liquified petroleum gases ( First Revision ) | 0 | ---- | Download | |
| 418 | IS 1448 : Part 74 : 2022/ISO 13215-2 : 2022 (1 Revision) |
Methods of test for petroleum and its products Part 74 Liquefied petroleum gases - Assessment of the dryness of propane - Valve freeze method | 0 | ---- | Buy | |
| 419 | IS 14511 : Part 2 : 2007/ISO 8984-2:1993 (1 Revision) |
Diesel engines - Testing of fuel injectors: Part 2 test methods (First Revision) | 0 | ---- | Buy | |
| 420 | IS 14511 : Part 1 : 2007/ISO 8984-1:1993 (1 Revision) |
Diesel engines - Testing of fuel injectors: Part 1 hand - Lever - Operated testing and setting apparatus (First Revision) | 0 | ---- | Buy | |
| 421 | IS 14545 : 2011/ISO 6218:2005 |
Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions (First Revision) | 0 | ---- | Buy | |
| 422 | IS 14547 : 1998 |
Aircraft - Electrical cables and cable harnesses - Terminology | 0 | ---- | Download | |
| 423 | IS 14548 : 1998 |
Aircraft - Standby magnetic compass - Specification | 0 | ---- | Download | |
| 424 | IS 14553 : 2008 (1 Revision) |
Automotive vehicles - Apparatus for the measurement of opacity (Smoke) of exhaust gas from vehicles equipped with compression ignition engines - Specification (First Revision) | 0 | ---- | Download | |
| 425 | IS 14554 : 1998 |
Automotive vehicles - Exhaustemissions - Apparatus for the measurement of carbon monoxide concentration from vehicles equipped with spark ignition engines at idling - Specification | 0 | ---- | Download | |
| 426 | IS 14572 : 2022/ISO 29061-3 : 2017 (1 Revision) |
Chloroform Code of Safety (First Revision) | 0 | ---- | Buy | |
| 427 | IS 14576 : 1998/ISO 12056 : 1996 |
Aircraft - Self - Propelled passenger stairs for large capacity aircraft - Functional requirements | 0 | ---- | Buy | |
| 428 | IS 14599 : 1999 |
Automotive vehicles - Performance requirements (Measurement Of Power, SFC, Opacity) of positive and compression ignition engines - Method of test | 0 | ---- | Download | |
| 429 | IS 14600 : 1999 |
Automotive vehicles - Exhaust emissions - Gaseous pollutants from vehicles equipped with internal combustion engines - Method of measurement | 0 | ---- | Download | |
| 430 | IS 14610 : 1999 |
Automotivevehicles - Fuel consumptiononchassis dynamometer - Methodof measurement | 0 | ---- | Download | |
| 431 | IS 14646 : 1999 |
Shipbuilding - Mooring buoy - Specification | 0 | ---- | Download | |
| 432 | IS 14660 : Part 1 : 1999/ISO 5620-1: 1992 |
Shipbuilding - Filling connection for . drinking water tanks: Part 1 general requirements | 0 | ---- | Buy | |
| 433 | IS 14660 : Part 2 : 1999/ISO 5620-2: 1992 |
Shipbuilding - Filling connection for drinking water tanks: Part 2 components | 0 | ---- | Buy | |
| 434 | IS 14664 : 2010 (1 Revision) |
Automotive vehicles - Performance requirements and testing procedure for braking system of two and three wheeled motor vehicles (First Revision) | 6 | ---- | Download | |
| 435 | IS 14682 : 2004 (1 Revision) |
Automotive vehicles - Lateral protection (Side Guards) - Technical requirements (First Revision) | 1 | ---- | Download | |
| 436 | IS 14747 : 1999/ISO 8383: 1985 |
Lifts on ships - Specific requirements | 0 | ---- | Buy | |
| 437 | IS 14748 : 2008/ISO 9785: 2002 (1 Revision) |
Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required (First Revision) | 0 | ---- | Buy | |
| 438 | IS 14751 : 1999/ISO 11086:1996 |
Gas turbines - Vocabulary | 0 | ---- | Buy | |
| 439 | IS 14754 : 2008 (1 Revision) |
Ships and marine technology - Air - Conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations (First Revision) | 0 | ---- | Download | |
| 440 | IS 14762 : 1999 |
Fishing vessels - Selection of propeller shafts for mechanized fishing boats - Guidelines | 0 | ---- | Download | |
| 441 | IS 14770 : 1999 |
Industrial trucks - Inspection and repair of fork arms in service on fork - Lift trucks | 0 | ---- | Buy | |
| 442 | IS 14771 : 2018 (1 Revision) |
Truck and bus tyres - Methods of measuring tyre rolling circumference - Loaded new tyres (First Revision) | 0 | ---- | Download | |
| 443 | IS 14790 : 2000/ISO 10841:1996 |
Aircraft - Catering vehicle for large capacity aircraft - Functional requirements | 0 | ---- | Buy | |
| 444 | IS 14798 : 2000 |
Aerospace - Self - Locking, fixed, single - Lug anchor nuts with counterbore, classification 1100 mpa/235 degree C - Specification | 0 | ---- | Buy | |
| 445 | IS 14799 : 2000 |
Aerospace - Nuts, anchor, self - Locking, floating two - Lug, with counterbore with mj threads, coated or uncoated, classification 1100 mpa/235"C, 1100 mpa/315"C and 1 100 mpal425"C - Specification | 0 | ---- | Download | |
| 446 | IS 14808 : 2000/ISO 9099: 1987 |
Air - Conditioning and ventilation of dry provision rooms on board ships - Design conditions and basis of calculations | 0 | ---- | Buy | |
| 447 | IS 14809 : 2000 |
Shipbuilding - Conventional signs to be used in schemes for the installations of sanitary systems in ships | 0 | ---- | Download | |
| 448 | IS 14813 : 2000 |
Automotive vehicles - Air horns - Specification | 1 | ---- | Download | |
| 449 | IS 14824 : 2000/ISO 3191:1998 |
Aerospace - Self - Locking, fixed, single - Lug anchor nuts, reduced series, with counterbore, with MJ threads, strength classification 1100 mpa/235° C - Specification | 0 | ---- | Buy | |
| 450 | IS/ISO 14851 : 2022/ISO 12614-4:2021 (2 Revision) |
Determination of the Ultimate Aerobic Biodegradability of Plastic Materials in an Aqueous Medium Method by Measuring the Oxygen Demand in A Closed respirometer First Revision | 0 | ---- | Buy | |
| 451 | IS 14880 : 2000/NULL |
Commercial road vehicles - Drawbar couplings and eyes for rigid drawbars - Strength tests | 0 | ---- | Buy | |
| 452 | IS 14902 : Part 1 : 2022/ISO 12614-7:2021 (3 Revision) |
Performance of high-voltage direct current HVDC systems with linecommutated converters : Part 1 Steady-state conditions second revision | 0 | ---- | Buy | |
| 453 | IS/ISO/TS 14904 : 2002/SO/TS 14904 : 2002 |
Road transport and traffic telematics - Electronic fee collection (Efc) - Interface specification for clearing between operators | 0 | ---- | Buy | |
| 454 | IS 14905 : 2001/ISO 8862: 1987 |
Air - Conditioning and ventilation of machinery control - Rooms on board ships - Design conditions and basis of calculations | 0 | ---- | Buy | |
| 455 | IS 14906 : 2001/ISO 8864: 1987 |
Air - Conditioning and ventilation of wheelhouse on board ships - Design conditions and basis of calculations | 1 | ---- | Buy | |
| 456 | IS 14909 : 2001/ISO 8861: 1998 |
Shipbuilding - Engine - Room ventilation in diesel engined ships - Design requirements and basis of calculations | 0 | ---- | Buy | |
| 457 | IS 14919 : 2001/ISO 4001:1977 |
Inland vessels - Raft - Type life - Saving apparatus - General requirements | 0 | ---- | Buy | |
| 458 | IS 14945 : 2001 |
Counter balanced trucks handling freight containers of 6 m length and above - Additional stability tests | 0 | ---- | Download | |
| 459 | IS 15052 : 2002 |
Shipbuilding - Diesel propulsion system responsibility - Requirements | 0 | ---- | Download | |
| 460 | IS 15053 : 2001 |
Shipbuilding - Hydraulic steering gears for vessels below 500 grt - General requirements | 1 | ---- | Download | |
| 461 | IS 15061 : 2002 |
Automotive vehicles - Flammability requirements | 1 | ---- | Download | |
| 462 | IS 15101 : 2002 |
Transport tractors and trailers fifth wheel couplings - Strength tests | 0 | ---- | Buy | |
| 463 | IS 15139 : 2002 |
Automotive vehicles - Safety belt anchorages - Specification | 3 | ---- | Download | |
| 464 | IS 15184 : 2002 |
Bicycles - Steel balls - Specification | 0 | ---- | Download | |
| 465 | IS 15223 : 2016 (1 Revision) |
Automotive vehicles - Interior fittings - Specification (First Revision) | 0 | ---- | Download | |
| 466 | IS 15293 : 2003/ISO 5858:1999 |
Aerospace - Nuts, self - Locking, with maximum operating temperature less than or equal to 425°C - Procurement specification | 0 | ---- | Buy | |
| 467 | IS 15308 : 2003/ISO 13596:2000 |
Aerospace - Inserts, self - Locking with MJ threads, closed type, in metallic material, coated or uncoated - Dimensions | 0 | ---- | Buy | |
| 468 | IS 15324 : 2003 |
Shipbuilding - Selection and testing of air starting systems - Code of practice | 0 | ---- | Download | |
| 469 | IS 15350 : 2017 (1 Revision) |
Automotive vehicles - Ignition systems - Methods of test | 0 | ---- | Download | |
| 470 | IS 15364 : 2003 |
Automotive vehicles - Spark - Plugs M10 x 1 with flat seating | 0 | ---- | Download | |
| 471 | IS 15428 : 2004 |
Retreading of radial/cross ply tyres for aircraft - Specification | 0 | ---- | Download | |
| 472 | IS 1543 : 1964 |
Specification for single cylinder fuel injection pumps (Revised) | 1 | ---- | Download | |
| 473 | IS 15445 : 2010/ISO 14726: 2008 |
Ships and marine technology - Identification colours for the content of piping systems (First Revision) | 0 | ---- | Buy | |
| 474 | IS 15453 : 2004 |
Spring - Tors1on bar springs - Specification | 0 | ---- | Download | |
| 475 | IS 15464 : 2022/ISO 11711-1:2019 (1 Revision) |
ANHYDROUS ETHANOL FOR USE AS BLENDING COMPONENT IN MOTOR GASOLINE SPECIFICATION First Revision | 0 | ---- | Buy | |
| 476 | IS 15471 : 2012/ISO 8641:2008 (1 Revision) |
Aerospace - Self - Locking nuts with maximum operating temperature greater than 425°C - Procurement specification (First Revision) | 0 | ---- | Buy | |
| 477 | IS 15487 : 2004 |
Industrial trucks - Specification for indicator lights for container handling and grappler arm operations | 0 | ---- | Buy | |
| 478 | IS 15488 : 2004 |
Powered industrial trucks - Safety signs and hazard pictorials - General principles | 0 | ---- | Buy | |
| 479 | IS 15494 : 2004 |
Packaging - Tactile warnings of danger - Requirements | 0 | ---- | Download | |
| 480 | IS 15514 : 2018 (1 Revision) |
Industrial trucks - Verification of stability - Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices (First Revision) | 0 | ---- | Buy | |
| 481 | IS 15515 : 2004 |
Industrial variable - Reach trucks - Additional stability tests for trucks handling freight containers of length 6 m and above | 0 | ---- | Buy | |
| 482 | IS 15516 : 2004 |
Industrial variable - Reach trucks - Stability test | 0 | ---- | Buy | |
| 483 | IS 15523 : 2018 (1 Revision) |
Automotive tyres - Precured patches for repairing cross ply/ radial tyres and inner tubes - Specification (First Revision) | 1 | ---- | Download | |
| 484 | IS 15524 : 2018 (1 Revision) |
Automotive vehicles - Retreading of tyres by the pre - Cured process - Specification (First Revision) | 0 | ---- | Download | |
| 485 | IS 15526 : 2004 |
Packaging - Complete, filled transport packages - Stability testing of unit loads | 0 | ---- | Buy | |
| 486 | IS 15543 : 2005 |
Selection of prime movers for trailers - Guidelines | 0 | ---- | Download | |
| 487 | IS 15546 : 2005 |
Automotive vehicles - Seats, their anchorages and head restraints or category M1- Specification | 2 | ---- | Download | |
| 488 | IS 15547 : 2005 |
Automotive vehicles - Plastic fuel tank for four wheelers | 3 | ---- | Download | |
| 489 | IS 15563 : 2005 |
Passenger car tyres - Methods for measuring rolling circumFerence - Loaded new tyres | 0 | ---- | Download | |
| 490 | IS 15611 : Part 2 : 2005/ISO 13563-2: 2001 |
Single side loading fork - Lift trucks: Part 2 additional stability test for trucks handling freight container of 6 M length and above | 0 | ---- | Buy | |
| 491 | IS 15632 : 2018/ISO 16165:2013 (1 Revision) |
Ships and marine technology - Marine environment protection - Terminology relating to oil spill response (First Revision) | 0 | ---- | Buy | |
| 492 | IS 15634 : 2006 |
Fork - Lift trucks - Fork - Arm extensions and telescopic fork - Arms - Technical characteristics and strength requirement | 0 | ---- | Download | |
| 493 | IS 15640 : 2006 |
BI - Directional and multi - Directional fork - Lift trucks - Stability tests | 0 | ---- | Buy | |
| 494 | IS 15645 : 2014 (1 Revision) |
Road vehicles - Light alloy wheels - Impact test (First? Revision) | 0 | ---- | Download | |
| 495 | IS 15702 : 2006 |
Automotive vehicles - Air brake hose - Specification | 0 | ---- | Download | |
| 496 | IS 15704 : 2018 (1 Revision) |
Automotive vehicles - Retreaded pneumatic tyres for commercial vehicles - Specification (First Revision) | 0 | ---- | Download | |
| 497 | IS 15708 : 2006 |
Road vehicles - Brake linings - Shear test procedure for disc brake pad and drum brake shoe assemblies | 0 | ---- | Download | |
| 498 | IS 15709 : 2018 (1 Revision) |
Automotive vehicles - Retreaded pneumatic tyres for passenger car - Specification (First Revision) | 1 | ---- | Download | |
| 499 | IS 15724 : 2006 |
Automotive tyres - Retreading procedure - Hot process | 1 | ---- | Download | |
| 500 | IS 15725 : 2006 |
Automotive tyres - Tyre curing envelop - Cold process | 0 | ---- | Download | |
| 501 | IS 15730 : 2006 |
AC flashers for 2 and 3 wheelers | 0 | ---- | Download | |
| 502 | IS 15731 : 2018 (1 Revision) |
Automotive tyres - Selection and inspection of retreadable tyre casing (First Revision) | 0 | ---- | Download | |
| 503 | IS 15734 : 2007 |
Freight containers - Repair before refurbishing - Guidelines | 0 | ---- | Download | |
| 504 | IS 15739 : 2007 |
Freight containers - Refurbishing - Guidelines | 0 | ---- | Download | |
| 505 | IS 15753 : 2007 |
Automotive tyres - Tyre curing bladder - Cold process | 1 | ---- | Download | |
| 506 | IS 15754 : 2006/ISO 21214 : 2006 |
Intelligent transport systems - Continuous air interface, long and medium range (CALM) - Infra - Red systems | 0 | ---- | Buy | |
| 507 | IS 15763 : 2020/ISO 13355 : 2016 (1 Revision) |
Packaging — Complete, Filled Transport Packages and Unit Loads — Vertical Random Vibration Test ( First Revision ) | 0 | ---- | Buy | |
| 508 | IS 15771 : 2008 |
Packaging - Complete, filled transport packages and unitloads - Impact test by rotational drop | 0 | ---- | Download | |
| 509 | IS 15780 : 2007 |
Automotive tyres - Repair of tyres and tubes used on motor vehicles | 0 | ---- | Download | |
| 510 | IS 15783 : 2008 |
Road vehicles - Brake control levers for two and three wheeled motor vehicles - Specification | 0 | ---- | Download | |
| 511 | IS 15794 : 2007 |
Road hazard impact test for wheel and tyre assemblies (Passenger Cars, Light Trucks And Multipurpose Vehicles) | 0 | ---- | Download | |
| 512 | IS 15796 : 2008 |
Automotive Vehicles and Agricultural Tractors — Horn Installation Requirements - Amendment no. 4 | 4 | ---- | Download | |
| 513 | IS 15802 : 2008 |
Automotive vehicles - Windscreen wiping system for 4 wheelers other than ml category of vehicles - Requirements | 1 | ---- | Download | |
| 514 | IS 15804 : 2008 |
AUTOMOTIVE VEHICLES — WINDSCREEN WIPING AND WASHING SYSTEM FOR M1 CATEGORY OF VEHICLES —REQUIREMENTS Amendment - 3 | 3 | ---- | Download | |
| 515 | IS 15832 : 2022/ISO 12614-9:2021 (2 Revision) |
Glossary of Technical Terms Related to Environmental | 0 | ---- | Buy | |
| 516 | IS 15846 : 2010 |
Anchors - Specification | 1 | ---- | Download | |
| 517 | IS 15875 : 2009/ISO 15867:2003 |
Intermediate bulk containers (IBCs) for non - Dangerous goods - Terminology | 0 | ---- | Buy | |
| 518 | IS 15901 : 2010 |
Automotive Vehicles?bumper Fitment On--M1 Categoryof Vehicles?test Methods | 2 | ---- | Download | |
| 519 | IS 15926 : 2012 |
Freight containers - Straddle carriers for freight container handling - Calculation of stability | 0 | ---- | Download | |
| 520 | IS 15940 : 2021/ISO 28564-2 : 2016 (1 Revision) |
Jewellery and precious metals Determination of platinum in platinum alloys ICP-OES method using an internal standard element | 0 | ---- | Buy | |
| 521 | IS 15943 : 2012 |
Automotive vehicles - Hand - Holds for three, four and more than four wheeled motor vehicles - Specification | 1 | ---- | Download | |
| 522 | IS 15945 : 2011 |
Tubeless tyres - Valves and components - Test methods | 0 | ---- | Download | |
| 523 | IS 15971 : 2013 |
Shipbuilding - Welded steel double bollards for inland navigation - Specification | 0 | ---- | Download | |
| 524 | IS 15986 : 2015 |
Automotive vehicles - Uniform provisions concerning the approval of vehicles of categories m1 and n1 with regard to braking | 3 | ---- | Download | |
| 525 | IS 15996 : 2021/ISO 12097-2 (1 Revision) |
Information and documentation - Library performance indicators First Revision of IS 15996 | 0 | ---- | Buy | |
| 526 | IS 15998 : 2013 |
Cast iron, spheroidal/nodular cast iron and cast steel screw - Down stop valves and stop and check valves for marine applications - Specification | 0 | ---- | Download | |
| 527 | IS 16000 : 2004 |
Aerospace quality management systems - Requirements | 0 | ---- | Download | |
| 528 | IS 16025 : 2022/ ISO 24508 : 2019 (2 Revision) |
Cigarettes Determination of nicotine in total particulate matter from the mainstream smoke Gas-chromatographic method | 0 | ---- | Buy | |
| 529 | IS 16043 : 2017 |
Copper alloy, cast iron, spheroidal/nodular cast iron and cast steel gate valves, flanged, for marine application - Specification | 0 | ---- | Download | |
| 530 | IS 16045 : 2013 |
Copper alloy screw - Down stop valves and stop and check valves for marine application - Specification | 0 | ---- | Download | |
| 531 | IS 16055 : 2013 |
Copper alloy valves for marine industry - Face to face and centre to face distances | 0 | ---- | Download | |
| 532 | IS 16057 : 2013 |
Lpg operated internal combustion engines - Safety and performance requirements - Specification | 0 | ---- | Download | |
| 533 | IS 1606 : 1979 (2 Revision) |
Specification for automobile lamps (Second Revision) | 3 | ---- | Download | |
| 534 | IS 16067 : Part 3 : 2023/ISO 22705-3: 2024 |
Microbiology of the food chain Horizontal method for the enumeration of beta glucuronidase positive Escherichia coli Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3- indolyl--D-glucuronide | 0 | ---- | Buy | |
| 535 | IS 16137 : Part 1 : 2014 |
Automotive vehicles - Methods of measurement of braking coefficient of road surfaces: Part 1 srtt method | 0 | ---- | Download | |
| 536 | IS 16143 : Part 2 : 2021/ISO 18079-3 (1 Revision) |
Hard coal and coke - Mechanical sampling : Part 2 coal - Sampling from moving streams (First Revision) | 0 | ---- | Buy | |
| 537 | IS 16183 : Part 4 : 2020/ISO 12215-4:2002 |
Small Craft - Hull Construction and Scantlings Part 4 Workshop and Manufacturing | 0 | ---- | Buy | |
| 538 | IS 16183 : Part 8 : 2020/ISO 12215-8:2009 |
Small Craft - Hull Construction and Scantlings: Part 8 Rudders | 0 | ---- | Buy | |
| 539 | IS 16183 : Part 2 : 2015/ISO 12215-2:2002 |
Small craft - Hull construction and scantlings: Part 2 materials : core materials for sandwich construction, embedded materials | 0 | ---- | Buy | |
| 540 | IS 16183 : Part 3 : 2014/ISO 12215-3:2002 |
Small craft - Hull construction and scantlings: Part 3 materials : steel, aluminium alloys, wood, other materials | 0 | ---- | Buy | |
| 541 | IS 16183 : Part 6 : 2020/ISO 12215-6:2008 |
Small Craft - Hull Construction and Scantlings Part 6 Structural Arrangements and Details | 0 | ---- | Buy | |
| 542 | IS 16183 : Part 9 : 2020/ISO 12215-9:2012 |
Small craft - Hull construction and scantlings: Part 9 Sailing Craft Appendages | 0 | ---- | Buy | |
| 543 | IS 16192 : Part 2 : 2014 |
Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 2 sheet metal wheel rims - Method of tests and requirements | 2 | ---- | Download | |
| 544 | IS 16192 : Part 3 : 2018 |
Automotive Vehicles — Wheel Rims for Two and Three Wheeled Vehicles Part 3 Spoke Wheel Rims — Methods of Tests and Requirements | 2 | ---- | Download | |
| 545 | IS 16192 : Part 1 : 2014 |
Automotive vehicles - Wheel rims for two and three wheeled vehicles: Part 1 light alloy wheel rims - Method of tests and requirements | 2 | ---- | Download | |
| 546 | IS 16211 : 2015 |
Electromagnetic Radiation From Automotive Vehicle - Permissible Levels and Methods of Tests | 0 | ---- | Download | |
| 547 | IS 16219 : 2014 |
Automotive vehicles - Metallic fuel tanks - Specification | 3 | ---- | Download | |
| 548 | IS 16234 : 2015 |
Ships and marine technology embarkation ladders - Specification | 0 | ---- | Download | |
| 549 | IS/ISO 16249 : 2013/ISO 16249 : 2013 |
Springs - Symbols | 0 | ---- | Buy | |
| 550 | IS 16305 : 2017 |
Cycle - Glossary of terms used in the bicycle industry | 0 | ---- | Buy | |
| 551 | IS 16314 : 2015 |
Cycle - Bicycle for general purpose - Specification | 0 | ---- | Download | |
| 552 | IS 16325 : 2019 |
Automotive Vehicles ― Windscreen Wiping System for 3-Wheeler Vehicles ― Specification- Amendment no 1 | 1 | ---- | Download | |
| 553 | IS 16367 : 2017 |
Road vehicles - Liquefied petroleum gas (LPG) specific equipment - Gas injector | 0 | ---- | Download | |
| 554 | IS 16490 : 2016 |
LED Destination Board System for Buses - Specification | 3 | ---- | Download | |
| 555 | IS 16559 : 2019/ISO 7243 : 2017 (1 Revision) |
Ergonomics of the Thermal Environment — Assessment of Heat Stress Using the WBGT ( Wet Bulb Globe Temperature ) Index ( First Revision ) | 0 | ---- | Buy | |
| 556 | IS 16561 : Part 2 : 2017/ISO 11064-2 : 2000 |
Ergonomic design of control centres Part 2 Principles for the Arrangement of Control Suites | 0 | ---- | Buy | |
| 557 | IS 16595 : Part 11 : 2020/ISO 9241-11 : 2018 |
Ergonomics of Human-System Interaction Part 11 Usability: Definitions and Concepts ( First Revision ) | 0 | ---- | Buy | |
| 558 | IS 16604 : 2017 |
Automotive vehicles - Arrangement of foot controls of vehicles - Specification | 1 | ---- | Download | |
| 559 | IS 16694 : 2018 |
Automotive Vehicles- Safety Belts, Restraint Systems and Safety Belt Reminder- Installation Requirements | 2 | ---- | Download | |
| 560 | IS 16712 : 2018 |
Automative vehicles - Spray suppression systems for two wheeled motor vehicles | 1 | ---- | Download | |
| 561 | IS 16722 : 2018 |
Radio Frequency Identification (RFID) System for Automotive Applications — Specification | 1 | ---- | Download | |
| 562 | IS 16753 : Part 1 : 2022/ ISO 28803 : 2012 (1 Revision) |
High Efficiency Filters and Filter Media for removing Particles from Air Part 1 Classification Performance Testing and Marking (First revision) | 0 | ---- | Buy | |
| 563 | IS 16792 : Part 1 : Sec 6 : 2023 (1 Revision) |
Measurement Procedures for Materials Used in Photovoltaic Modules Part 1: Encapsulants Section 6 Test Methods for Determining the Degree of Cure in Ethylene-Vinyl Acetate (First Revision) | 0 | ---- | Download | |
| 564 | IS 16792 : Part 5 : Sec 2 : 2022/ISO/TR 14646 : 2007 |
Measurement Procedures for Materials Used in Photovoltaic Modules Part 5-2: Edge Seals Durability Evaluation Guideline | 0 | ---- | Buy | |
| 565 | IS 16794 : Part 3 : 2019/ISO 5621:1984 |
Tools for pressing Punch holder shanks Part 3 Type D | 0 | ---- | Buy | |
| 566 | IS 16833 : 2018 |
Automotive Tracking Device (ATD) and Integrated Systems | 2 | ---- | Download | |
| 567 | IS 16837 : 2018 |
Automotive vehicles - Interior fittings for other than m1 category of vehicles - Specification | 0 | ---- | Download | |
| 568 | IS 16883 : 2022/ISO 21350: 2023 |
Enclosures for protection against ionizing radiation - Lead shielding units for 50 mm and 100 mm thick wall | 0 | ---- | Buy | |
| 569 | IS 16971 : 2018 |
Shipbuilding - Strum boxes | 0 | ---- | Download | |
| 570 | IS 16972 : 2018 |
Shipbuilding and marine structures - Lubrication nipples - Cone and flat types | 0 | ---- | Download | |
| 571 | IS 16973 : 2018 |
Ships and marine technology - Ship launching air bags | 0 | ---- | Download | |
| 572 | IS 16974 : 2018 |
Ships and marine technology - Pressure/vacuum valves for cargo tanks | 0 | ---- | Download | |
| 573 | IS 17009 : 2018/ISO 11226 : 2000 |
Ergonomics - Evaluation of static working postures | 0 | ---- | Buy | |
| 574 | IS 17017 : Part 2 : Sec 3 : 2020 |
Electric Vehicle Conductive Charging System Part 2 Plugs, Socket - Outlets, Vehicle Connectors and Vehicle Inlets Section 3 Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers | 0 | ---- | Download | |
| 575 | IS 17017 : Part 2 : Sec 1 : 2020 |
Electric Vehicle Conductive Charging System Part 2 Plugs, Socket-Outlets, Vehicle Connectors, and Vehicle Inlets Section 1 General requirements | 0 | ---- | Download | |
| 576 | IS 17019 : 2018 |
Gear / gerotor oil pump for motorcycle / scooter / moped - Specification | 0 | ---- | Download | |
| 577 | IS 17031 : Part 2 : 2019/ISO 11228-2:2007 |
Ergonomics — Manual Handling Part 2 Pushing and Pulling | 0 | ---- | Buy | |
| 578 | IS 17031 : Part 3 : 2018/ISO 11228-3:2007 |
Ergonomics — Manual Handling Part 3 Handling of Low Loads at High Frequency | 0 | ---- | Buy | |
| 579 | IS 17033 : 2018/ISO/TR 12296:2012 |
Ergonomics - Manual handling of people in the healthcare sector | 0 | ---- | Buy | |
| 580 | IS 17095 : 2019/ISO 16682:2015 |
Aerospace series - Terminology for clamping devices | 0 | ---- | Buy | |
| 581 | IS 17096 : 2019/ISO 10254 : 2016 |
Air Cargo and Ground Equipment — Vocabulary | 0 | ---- | Buy | |
| 582 | IS 17102 : 2019/ISO 7731 : 2003 |
Ergonomics - Danger signals for public and work areas - Auditory danger signals | 0 | ---- | Buy | |
| 583 | IS 17103 : 2019/ISO 9886 : 2004 |
Ergonomics - Evaluation of thermal strain by physiological measurements | 0 | ---- | Buy | |
| 584 | IS 17105 : 2019/ISO 28802 : 2012 |
Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people | 0 | ---- | Buy | |
| 585 | IS 17113 : Part 3 : 2022/ISO 12614-12:2021 |
Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference methods and validated alternative methods in a single laboratory | 0 | ---- | Buy | |
| 586 | IS 17128 : Part 1 : 2019 |
Automotive vehicles ? vehicle dynamics test methods: Part 1 general test conditions | 0 | ---- | Download | |
| 587 | IS 17128 : Part 2 : 2019 |
Automotive Vehicles ― Vehicle Dynamics Test Methods Part 2 Steady-State Test Procedure for Vehicle Stability and Controllability — Open-Loop and Closed Loop Test | 0 | ---- | Download | |
| 588 | IS 17148 : Part 5 : 2022 |
Performance characteristics of automated measuring systems Part 5: Determination of the mass concentration of ammonia in flue gas from Stationary Sources | 0 | ---- | Download | |
| 589 | IS 17183 : 2019/ISO 5625:1978 |
Shipbuilding - Welded Bulkhead Pieces with Flanges for Steel Pipework - PN 6, PN 10 and PN 16 | 0 | ---- | Buy | |
| 590 | IS 17184 : 2019/ISO 6812:1983 |
Roll On/Roll Off Ship-to-Shore Connection - Interface Between Terminals and Ships with Straight Stern / Bow Ramps | 0 | ---- | Buy | |
| 591 | IS 17185 : 2019/ISO 7365:2012 |
Shipbuilding and Marine Structures - Deck Machinery - Towing Winches for Deep Sea Use | 0 | ---- | Buy | |
| 592 | IS 17191 : Part 1 : 2019 |
Electric Power Train Vehicles Part 1 Measurement of Electrical Energy Consumption | 1 | ---- | Download | |
| 593 | IS 17191 : Part 2 : 2019 |
Electric Power Train Vehicles Part 2 Method of Measuring the Range | 1 | ---- | Download | |
| 594 | IS 17191 : Part 3 : 2019 |
Electric Power Train Vehicles Part 3 Measurement of Net Power and the Maximum 30 Minute Power | 1 | ---- | Buy | |
| 595 | IS 17270 : 2019 |
Intelligent Transport Systems ( ITS ) : Reverse Parking Alert System ( RPAS ) Amendment - 1 | 1 | ---- | Download | |
| 596 | IS/ISO 17327 : Part 1 : 2018/ISO 18185-2:2007 |
Non-active surgical implants - Implant coating Part 1 General requirements | 0 | ---- | Buy | |
| 597 | IS 17358 (Part 2) : 2020 |
Agro textiles — Fencing nets for agriculture and horticulture purposes — Specification Part 2 Fencing nets made from mono filament yarns and combination of tape and mono filament yarns Amendment - 1 | 1 | ---- | Download | |
| 598 | IS 17400 : 2021/ISO 10368:2006 |
Glass Fibre Reinforced Gypsum Building Panels Specification | 0 | ---- | Buy | |
| 599 | IS 17401 : 2021/ISO 11156 : 2011 |
Design and Construction of Buildings using Glass Fibre Reinforced Gypsum Panels - Code of Practice | 0 | ---- | Buy | |
| 600 | IS 17422 : 2021/ISO 17940:2015 |
Guidelines for assessment of the environmental heath impacts of river valley projects | 0 | ---- | Buy | |
| 601 | IS 17427 : 2020 |
Wooden ( Timber ) Pallets for Packaging, Storage and Transportation - Specification | 5 | ---- | Download | |
| 602 | IS 17436 : 2020 |
Automotive Vehicles - Advance-Warning Triangle - Specification | 0 | ---- | Download | |
| 603 | IS 17449 : 2022/ISO 12614-8:2021 (2 Revision) |
Monomeric MDI (MMDI) and polymeric MDI (PMDI ) - Specification (First Revision) | 0 | ---- | Buy | |
| 604 | IS 17512 : 2021/ISO 16103 : 2005 |
Requirements for Electrical Installations in Medical Locations | 0 | ---- | Buy | |
| 605 | IS 17536 : Part 4 : 2022/ISO 24505 : 2016 |
Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 4: Marine evacuation systems | 0 | ---- | Buy | |
| 606 | IS 17544 : 2022/ISO 14621-1:2019 |
Multilayer (PE-AL-PE) Plastic Piping Systems for Indoor Gas Installations with a Maximum Operating Pressure up to and Including 500 kPa (5 bar) - Specification | 0 | ---- | Buy | |
| 607 | IS 17551 : 2021/ISO 18079-4 |
Fruit and vegetable products - Determination of pH | 0 | ---- | Buy | |
| 608 | IS/ISO 17556 : 2019/ISO 26262-7:2018 (2 Revision) |
Plastics Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved First Revision | 0 | ---- | Buy | |
| 609 | IS/ISO 17573 : 2010/ISO 17573 : 2010 |
Electronic fee collection - Systems architecture for vehicle - Related tolling | 0 | ---- | Buy | |
| 610 | IS/ISO/TS 17574 : 2009/SO/TS 17574 : 2009 |
Electronic fee collection - Guidelines for security protection profiles | 0 | ---- | Buy | |
| 611 | IS/ISO/TS 17575 : Part 2 : 2010/ISO/TS 17575-2:2010 |
Electronic fee collection - Application interface definition for autonomous systems: Part 2 communication and connection to the lower layers | 0 | ---- | Buy | |
| 612 | IS/ISO/TS 17575 : Part 4 : 2011/ISO/TS 17575 : Part 4 : 2011 |
Electronic Fee Collection - Application Interface Definition for Autonomous Systems Part 4 Roaming | 0 | ---- | Buy | |
| 613 | IS/ISO/TS 17575 : Part 3 : 2011/ISO 17575-3 |
Electronic Fee Collection - Application Interface Definition for Autonomous Systems Part 3 Context Data | 0 | ---- | Buy | |
| 614 | IS/ISO/TS 17575 : Part 1 : 2010/ISO/TS 17575 : Part 1 : 2010 |
Electronic fee collection - Application interface definition for autonomous systems: Part 1 charging | 0 | ---- | Buy | |
| 615 | IS 17592 : 2021/ISO 26262-6:2018 |
Reinforcement products -- Woven fabrics -- Determination of width and length | 0 | ---- | Buy | |
| 616 | IS 17614 : 2021 |
Water quality Sampling Part 21 Guidance on Sampling of Drinking Water distributed by tankers or means other than distribution pipes | 0 | ---- | Download | |
| 617 | IS 17614 : Part 7 : 2021 |
WATER QUALITY - SAMPLING Part 7 Guidance on sampling of water and steam in boiler plants | 0 | ---- | Download | |
| 618 | IS 17614 : Part 25 : 2022/ ISO 9241-300:2008 |
Water Quality Sampling Part 25 Microbiological Analysis | 0 | ---- | Buy | |
| 619 | IS 17646 : Part 4 : 2021 |
Preparation and quality management of fluids for haemodialysis and related therapies Part 4 Concentrates for haemodialysis and related therapies | 0 | ---- | Download | |
| 620 | IS 17650 : Part 1 : 2021/ ISO 9241-302:2008 |
Water efficient plumbing products - Requirements: Part 1 Sanitaryware | 0 | ---- | Buy | |
| 621 | IS 17653 : 2021/ISO 12405-4:2018 |
Solid biofuels - Determination of ash content | 0 | ---- | Buy | |
| 622 | IS 17661 : Part 2 : 2022/ ISO 9241-110:2020 |
Ships and marine technology Marine NOX Reduction Agent AUS 40 Part 2: Test Methods | 0 | ---- | Buy | |
| 623 | IS 17712 : Part 3 : 2021 |
Implants for surgery Cardiac pacemakers Part 3: Low-profile connectors IS-1 for implantable pacemakers | 0 | ---- | Download | |
| 624 | IS 17725 : 2022 |
PRECAST CONCRETE CIRCULAR MANHOLE SPECIFICATION | 0 | ---- | Download | |
| 625 | IS 17728 : 2021/ISO 6185-1:2001 |
Agro Textiles - High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System - Specification | 0 | ---- | Buy | |
| 626 | IS 17747 : 2021 |
Spices and Condiments — Nutmeg (Without Shell), Whole and Ground — Specification | 0 | ---- | Download | |
| 627 | IS 17755 : 2022/ISO 21351: 2005 |
CONSORTIA OF MICROBIAL INOCULANTS (MIXED BIOFERTILIZER INOCULANTS) – SPECIFICATION | 0 | ---- | Buy | |
| 628 | IS 17773 : 2022/ IEC/TR 60092-370:2016 |
Closed-Circuit Ammonia Refrigeration System — Code of Practice for Design and Installation (ANSI/IIAR 2 : 2014, NEQ) | 1 | ---- | Buy | |
| 629 | IS 17787 : 2021/ISO 12215-1:2000 |
Medical Textiles Nonwoven Wipes Specification | 0 | ---- | Buy | |
| 630 | IS 17800 : 2022 |
Tennis Rackets - Racket components and physical Parameters | 0 | ---- | Download | |
| 631 | IS 17801 : Part 1 : 2022/ISO 23273: 2013 |
Stationary training equipment: Part 1: General safety requirements and test methods | 0 | ---- | Buy | |
| 632 | IS 17801 : Part 3 : 2022/ISO 16111:2018 |
Stationary training equipment: Treadmills additional specific safety requirements and test methods ISO 20957-6 | 0 | ---- | Buy | |
| 633 | IS 17803 : 2022/ISO 10075-3 : 2004 |
POTABLE WATER BOTTLES (METALLIC) - SPECIFICATION | 2 | ---- | Buy | |
| 634 | IS 17813 : 2022/ISO 27025: 2010 |
Multi Layer (Polyethylene-Stainless Steel) Stainless Steel Pliable Corrugated Gas Tubing Kits in Buildings (Indoor and Outdoor) with an Operating Pressure up to 5 kg/cm² ( 5 bar ) ― Specification | 0 | ---- | Buy | |
| 635 | IS 17814 : 2022/ISO 10789:2011 |
Corrugated Metal Flexible Safety Gas Hose Assemblies Specification | 0 | ---- | Buy | |
| 636 | IS 17821 : 2022/ISO 5797:2004 |
ETHANOL AS A FUEL FOR USE IN POSITIVE IGNITION ENGINE POWERED VEHICLES SPECIFICATION | 0 | ---- | Buy | |
| 637 | IS 17869 : 2022/ISO 12614-14:2021 |
LOW-PRESSURE STEAM COOKER SPECIFICATION | 1 | ---- | Buy | |
| 638 | IS 17897 : 2022/ISO 29061-1 : 2010 |
Stone-Polymer Composite Flooring Tiles and Planks - Specification | 0 | ---- | Buy | |
| 639 | IS 17900 : Part 6 : 2022/ISO 12614-13:2021 |
Lifts for the Transport of Persons and Goods : Part 6 Guide for Maintenance of Lifts | 1 | ---- | Buy | |
| 640 | IS 17923 : 2022/ISO 12614-19:2021 |
Physical Activity, Sports and Injury Management - Guidelines for Safety in Educational Institutions and Community Sports Academies | 0 | ---- | Buy | |
| 641 | IS 17962 : 2022/ISO 29061-4 : 2017 |
Female condoms - Requirements and test methods (First Revision) | 0 | ---- | Buy | |
| 642 | IS/ISO/IEC 18004 : 2015/ISO 15069 : 2018 |
Information technology Automatic identification and data capture techniques QR Code bar code symbology specification | 0 | ---- | Buy | |
| 643 | IS 18057 : Part 10 : 2023 |
Woodworking Machines Safety Part 10: Building Site Saws Contractor Saws | 0 | ---- | Download | |
| 644 | IS/ISO 18164 : 2005 |
Passenger car, truck, bus and motorcycle tyres - Methods of measuring rolling resistance | 0 | ---- | Download | |
| 645 | IS 18178 : 2023/ISO 16192: 2024 |
Kantakari Solanum surattense Burm f Whole plant for use in Traditional Medicine Specification | 0 | ---- | Buy | |
| 646 | IS/ISO 18369 :Part1 : 2017/ISO 12776 : 2008 (1 Revision) |
Ophthalmic optics Contact lenses Part 1 Vocabulary classification system and recommendations for labeling specifications First Revision | 0 | ---- | Buy | |
| 647 | IS/ISO 18650 : Part 1 : 2021/ISO 12614-10:2021 (2 Revision) |
BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT CONCRETE MIXERS PART 1: COMMERCIAL SPECIFICATIONS | 0 | ---- | Buy | |
| 648 | IS 1884 : 1993 (3 Revision) |
Automotive vehicles - Electric horns - Specification Amendment - 4 | 4 | ---- | Download | |
| 649 | IS 1885 : Part 60 : 2022/ISO 18885-3:2021 (2 Revision) |
Electrotechnical Vocabulary: Part 60 Equipment for Explosive Atmospheres (Second Revision) | 0 | ---- | Buy | |
| 650 | IS/ISO/IEC 19752 : 2017/ISO 12614-11:2021 |
Information technology Office equipment Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components | 0 | ---- | Buy | |
| 651 | IS/ISO/IEC 19798 : 2017/ISO 12614-17:2021 |
Information technology Office equipment Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer | 0 | ---- | Buy | |
| 652 | IS/ISO/IEC 19799 : 2007/ISO 12614-18:2021 |
Information technology Method of measuring gloss uniformity on printed pages | 0 | ---- | Buy | |
| 653 | IS/ISO 20108 : 2017/ISO 6185-2:2001 |
SIMULTANEOUS INTERPRETING QUALITY AND TRANSMISSION OF SOUND AND IMAGE INPUT REQUIREMENTS | 0 | ---- | Buy | |
| 654 | IS/ISO 2030 : 2018/ ISO 9241-971:2020 (1 Revision) |
Granulated cork Size analysis by mechanical sieving | 0 | ---- | Buy | |
| 655 | IS/ISO 20562 : 2014 (1 Revision) |
Tyre valves - Iso core chambers no. 1, no. 2, no. 3 and no. 4 (First Revision) | 0 | ---- | Download | |
| 656 | IS 2061 : 1995 (1 Revision) |
Bicycle - Front forks - Specification (First Revision) | 3 | ---- | Download | |
| 657 | IS/ISO 20671 : Part 1 : 2021/ISO 22705-1:2021 |
Brand Evaluation - Part 1: Principles and Fundamentals | 0 | ---- | Buy | |
| 658 | IS 2077 : 2014 (3 Revision) |
Automotive vehicles - Electric relays - Specification (Third Revision) | 0 | ---- | Download | |
| 659 | IS 2081 : 1998 (2 Revision) |
Automotive vehicles - Taper terminal cable connectors for batteries - Specification (Second Revision) | 0 | ---- | Download | |
| 660 | IS/ISO 20816 (Part 2) : 2017 |
Mechanical Vibration — Measurement and Evaluation of Machine Vibration Part 2 Land-Based Gas Turbines, Steam Turbines and Generators in Excess of 40 MW, with Fluid-Film Bearings and Rated Speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min ( First Revision ) Amendment - 1 | 1 | ---- | Download | |
| 661 | IS/ISO 21214 : 2015/21214 : 2015 |
Intelligent Transport Systems — Communications Access for Land Mobiles (CALM) — Infra-Red Systems | 0 | ---- | Buy | |
| 662 | IS/ISO 2162 : Part 2 : 1993/ISO 2162: Part-2: 1993 |
Technical product documentation - Springs: Part 2 presentation of data for cylindrical helical compression springs | 0 | ---- | Buy | |
| 663 | IS/ISO 22313 : 2020/ISO/TS 9241-411 : 2012 (1 Revision) |
Security and resilience Business continuity management systems Guidance on the use of ISO 22301 | 0 | ---- | Buy | |
| 664 | IS/ISO/TS 22318 : 2021/ISO 14300-1: 2023 (1 Revision) |
Security and resilience - Business continuity management systems - Guidelines for supply chain continuity management First Revision | 0 | ---- | Buy | |
| 665 | IS/ISO/TR 22370 : 2020/ ISO 1726-2:2007 |
Security and resilience Urban resilience Framework and principles | 0 | ---- | Buy | |
| 666 | IS/ISO 22915 : Part 15 : 2020/ISO 13218 : 1998 |
INDUSTRIAL TRUCKS VERIFICATION OF STABILITY PART 15: COUNTERBALANCED TRUCKS WITH ARTICULATED STEERING | 0 | ---- | Buy | |
| 667 | IS/ISO 22915 : Part 9 : 2014/ISO/TS 22239-1 : 2018 |
INDUSTRIAL TRUCKS VERIFICATION OF STABILITY PART 9: COUNTERBALANCED TRUCKS WITH MAST HANDLING FREIGHT CONTAINERS OF 6 M 20 FT LENGTH AND LONGER | 0 | ---- | Buy | |
| 668 | IS 2325 : 1981 (1 Revision) |
Specification for ignition coils for battery - Coil ignition systems for automobiles (First Revision) | 3 | ---- | Download | |
| 669 | IS/ISO/IEC 23736 : Part 1 : 2020 |
Information technology Digital publishing EPUB 3.0.1 Part 1: Overview | 0 | ---- | Download | |
| 670 | IS/ISO/IEC 2382 : 2015/ISO 17907:2014 |
Information Technology- Vocabulary ( First Revision ) | 0 | ---- | Buy | |
| 671 | IS/ISO 24014 : Part 1 : 2007/ISO 24014-1 |
Public transport - Interoperable fare management system: Part 1 architecture | 0 | ---- | Buy | |
| 672 | IS 2414 : 2005 (4 Revision) |
Cycle and rickshaw pneumatic tyres - Specification (Fourth Revision) | 0 | ---- | Buy | |
| 673 | IS 2415 : 2015 (4 Revision) |
Cycle - Rubber tubes (Moulded/ Jointed) - Specification (Fourth Revision) | 0 | ---- | Download | |
| 674 | IS 2553 (Part 2) : 2019 (1 Revision) |
Safety glass - Specification: Part 2 for road transport (First Revision) Amendment - 6 | 7 | ---- | Download | |
| 675 | IS 2560 : 1979 (1 Revision) |
Specification for rubber-based adhesives for tubes, non-curing (First Revision) | 0 | ---- | Download | |
| 676 | IS 2561 : 1963 |
Specification for rubber-based adhesives for the automobile industry | 0 | ---- | Download | |
| 677 | IS 2562 : 1979 (1 Revision) |
Specification for rubber-based adhesives for tyres and tubes, curing (First Revision) | 0 | ---- | Download | |
| 678 | IS 2577 : Part 5 : 2018/ISO 8820-5:2015 (2 Revision) |
Road Vehicles - Fuse Links Part 5 Links with Axial Terminals (Strip Fuse-links) Types SF30 and SF51 and Test Fixtures (Third Revision) | 0 | ---- | Buy | |
| 679 | IS 2577 : Part 4 : 2018/ISO 8820-4:2016 (3 Revision) |
Road Vehicles - Fuse Links Part 4 Fuse-links with Female Contacts (Type A) and Bolt-In Contacts (Type B) and their Test Fixtures (Third Revision) | 0 | ---- | Buy | |
| 680 | IS 2577 : Part 1 : 2018/ISO 8820-1:2014 (3 Revision) |
Road Vehicles - Fuse-Links Part 1 Definitions and General Test Requirements (Third Revision) | 0 | ---- | Buy | |
| 681 | IS 2577 : Part 2 : 2018/ISO 8820-2:2014 (3 Revision) |
Road Vehicles – Fuse-Links Part 2 User’s Guide (Third Revision) | 0 | ---- | Buy | |
| 682 | IS 2616 : 2023/21266-1: 2018 (1 Revision) |
Brush for cleaning tank and commode/lavatory - Specification ( First Revision ) | 0 | ---- | Buy | |
| 683 | IS/ISO 26262 : Part 6 : 2018/ISO 16392:2017 |
Road vehicles Functional safety Part 6: Product development at the software level | 0 | ---- | Buy | |
| 684 | IS/ISO 26800 : 2011/ISO 26800 : 2011 |
Ergonomics — General Approach, Principles and Concepts | 0 | ---- | Buy | |
| 685 | IS/ISO 26909 : 2009/ISO 26909 : 2009 |
Springs - Vocabulary | 0 | ---- | Buy | |
| 686 | IS 2742 : Part 2 : 1999 |
Automotive vehicles - Brake linings - Rubberised: Part 2 specification | 1 | ---- | Download | |
| 687 | IS 2742 : Part 7 : 2018 |
Automotive vehicles - Brake linings: Part 7 shear test procedure for disc brake pad and drum brake shoe assemblies | 1 | ---- | Download | |
| 688 | IS 2742 : Part 3 : 1994 |
Automotive vehicles - brake linings: Part 3 methods of test | 2 | ---- | Download | |
| 689 | IS 2742 : Part 5 : 1994 |
Automotivevehicles - - Brakelinings: Part 5 internal shear strength - Method of test | 1 | ---- | Download | |
| 690 | IS 2742 : Part 1 : 1994 (1 Revision) |
Automotive vehicles - Brake linings (Non - Rubberized): Part 1 specification (First Revision) | 1 | ---- | Download | |
| 691 | IS 2742 : Part 6 : 2018 |
Automotive vehicles - Brake linings: Part 6 compressive strain test methods | 0 | ---- | Buy | |
| 692 | IS 2742 : Part 4 : 1994 |
Automotive vehicles - Brake linings: Part 4 coefficient of friction - method of test | 2 | ---- | Download | |
| 693 | IS 2765 : 1982 (1 Revision) |
Specification for radiator hose (First Revision) | 1 | ---- | Download | |
| 694 | IS 2785 : 2025 (2 Revision) |
CHEESE - SPECIFICATION (Second Revision of IS 2785) Amendment - 1 | 1 | ---- | Download | |
| 695 | IS/ISO 28580 : 2009 |
Passenger car, truck and bus tyres - Methods of measuring rolling resistance - Single point test and correlation of measurement results | 0 | ---- | Download | |
| 696 | IS 2912 : 2022/ISO/TS 29062 : 2009 (2 Revision) |
Liquid flow measurement in open channels-slope-area method | 0 | ---- | Buy | |
| 697 | IS 2973 : 2017 (2 Revision) |
Bicycle Steering Head Assembly - Specification | 0 | ---- | Download | |
| 698 | IS/ISO/IEC 30106 : Part 3 : 2020 |
Information technology Object oriented BioAPI Part 3: C implementation | 0 | ---- | Download | |
| 699 | IS/ISO/IEC 30130 : 2016/ISO 16106 : 2020 |
Software engineering Capabilities of software testing tools | 0 | ---- | Buy | |
| 700 | IS 3028 : 1998 (2 Revision) |
Automotive vehicles - Noise emitted by moving vehicles - Method of measurement (Second Revision) | 6 | ---- | Download | |
| 701 | IS 3028 : Part 1 : 2018 |
Automotive vehicles - Noise emitted by moving vehicles - Specification and method of measurement: Part 1 L 2 category | 1 | ---- | Download | |
| 702 | IS 3141 : 2007 (2 Revision) |
Starter motors for internal combustion engines used for automotive and other applications - Specification (Second Revision) | 0 | ---- | Download | |
| 703 | IS 3169 : 1991 (1 Revision) |
Internal combustion engines - Two stage, one litre, diesel fuel filters (First Revision) | 1 | ---- | Download | |
| 704 | IS 3170 : Part 2 : 2006/ISO 4010:1998 (1 Revision) |
Internal combustion engines - Fuel injection nozzles: Part 2 calibrating nozzle, delay pintle type (First Revision) | 0 | ---- | Buy | |
| 705 | IS 3170 : Part 1 : 2006/ISO 2697:1999 (2 Revision) |
Internal Combustion Engines - Fuel Injection Nozzles Part 1 Injection Nozzles - Size `S' | 0 | ---- | Buy | |
| 706 | IS 3171 : Part 2 : 2006/ISO 7026:1997 (1 Revision) |
Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 2 : Screw-in Injection Nozzle Holders, Types 20, 21, 21.1 and 27 for Pintle Nozzle Size `S', Type B | 0 | ---- | Buy | |
| 707 | IS 3171 : Part 1 : 1997/ISO 2699:1994 (1 Revision) |
Internal Combustion Engines - Fuel Injection Nozzle Holders - Part 1 : Flange Mounted Fuel Injectors Size `S' Types 2, 3, 4, 5 and 6 | 0 | ---- | Buy | |
| 708 | IS 3171 : Part 3 : 1997/ISO 7030:1987 |
Internal combustion engines - Fuel injection nozzle holders: Part 3 screw mounted injection nozzle holders, types 12,13,14,15,16,17,18 and 19 | 0 | ---- | Buy | |
| 709 | IS 3172 : 1997 (2 Revision) |
Internal combustion engines - Fuel injection equipment - Single and double ended pipe unions (Single And Double Ended Banjo) - Specification (Second Revision) | 1 | ---- | Download | |
| 710 | IS 3173 : 1965 |
Specification for high pressure connections for fuel injection equipment for diesel engines | 0 | ---- | Download | |
| 711 | IS 3174 : 1974 (1 Revision) |
Specification for pipe union bolt (First Revision) | 0 | ---- | Download | |
| 712 | IS 3175 : 2013 (2 Revision) |
Internal combustion engine - Sealing washers for pipe unions - Specification (Second Revision) | 0 | ---- | Download | |
| 713 | IS 3251 : Part 2 : 2021/ISO 26262-8:2018 (2 Revision) |
Asphalt Paver Finisher — Specification Part 2 Hydraulic (Second Revision) | 0 | ---- | Buy | |
| 714 | IS 3251 : Part 1 : 2021/ISO 23048 |
Asphalt Paver Finisher Part 1 General Requirements (First Revision) | 0 | ---- | Buy | |
| 715 | IS 3271 : 1966 |
General requirements for steel cowl ventilators with detachable components | 0 | ---- | Download | |
| 716 | IS 3272 : 1966 |
Dimensions for oval - Head steel cowl ventilators | 0 | ---- | Download | |
| 717 | IS 3273 : 1966 |
Dimensions for circular - Head steel cowl ventilators | 0 | ---- | Download | |
| 718 | IS 3274 : 1967 |
Specification for goose - Neck ventilators - Welded type | 1 | ---- | Download | |
| 719 | IS 3275 : 1966 |
Dimensions for accessories for steel cowl ventilators | 0 | ---- | Download | |
| 720 | IS 3276 : 1966 |
Dimensions for mechanical turning arrangements for steel cowl ventilators | 0 | ---- | Download | |
| 721 | IS 3278 : 1966 |
Dimensions for detachable coaming covers and wire mesh grids for steel cowl ventilators | 0 | ---- | Download | |
| 722 | IS 3351 : 2006/ISO 4020:2001 (2 Revision) |
Road vehicles - Fuel filters for diesel . engines - Test methods (Second Revision) | 0 | ---- | Buy | |
| 723 | IS 3400 : Part 18 : 2021/ISO 13274 : 2013 (2 Revision) |
Methods of Test for Vulcanized Rubbers - Part 18 : Stiffness at Low Temperature Gehman Test( Second Revision ) | 0 | ---- | Buy | |
| 724 | IS 3400 : Part 2 : Sec 4 : 2022/ISO 12614-5:2021 |
METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 4 INDENTATION HARDNESS BY DUROMETER METHOD (SHORE HARDNESS) ( Second Revision ) | 0 | ---- | Buy | |
| 725 | IS 35 : 2021/iso 26262-4:2018 (2 Revision) |
Zinc oxide for paints - Specification ( Second Revision ) | 0 | ---- | Buy | |
| 726 | IS 3521 : Part 9 : 2021 |
Personal fall arrest systems - Specification : Part 9 Descending devices | 0 | ---- | Buy | |
| 727 | IS 3573 : 2010 |
Sea anchors for lifeboats and liferafts - Specification (First Revision) | 0 | ---- | Download | |
| 728 | IS 3580 : 2007 (1 Revision) |
General requirements for distress signals for lifeboats and liferafts (First Revision) | 0 | ---- | Download | |
| 729 | IS 3586 : 2007 (1 Revision) |
Recommendation for lifeboats equipment (First Revision) | 0 | ---- | Download | |
| 730 | IS 3649 : 2018 (1 Revision) |
Automotive vehicles - Clutch facing for automotive transmission - Specification (First Revision) | 0 | ---- | Download | |
| 731 | IS 3732 : 2013 (1 Revision) |
Rigid liferafts - Specification (First Revision) | 0 | ---- | Download | |
| 732 | IS 3733 : 2000 (1 Revision) |
Shipbuilding - Conventional signs to be used in schemes for the installations of ventilation systems - Recommendations (First Revision) | 0 | ---- | Download | |
| 733 | IS/ISO 39001 : 2012/ISO 39001 : 2012 |
Road traffic safety (Rts) management systems - Requirements with guidance for use | 0 | ---- | Buy | |
| 734 | IS 3947 : 1994 (1 Revision) |
Shipbuilding - Testing, installation and maintenance of marine portable fire appliances - Code of practice (First Revision) | 0 | ---- | Download | |
| 735 | IS 3971 : 2019/ISO 445:2013 (3 Revision) |
Pallets for materials handling - Vocabulary (Third Revision) | 0 | ---- | Buy | |
| 736 | IS 3979 : 1998 (1 Revision) |
Shipbuilding - Testing of marine diesel engines - Code of practice (First Revision) | 0 | ---- | Buy | |
| 737 | IS 4010 : 1967 |
Specification for sounding pipes | 0 | ---- | Download | |
| 738 | IS 4050 : 1976 (1 Revision) |
Methods of tests for horn switches for automobiles (First Revision) | 2 | ---- | Download | |
| 739 | IS 4060 : 1994 (2 Revision) |
Automotive vehicles - Flashers for direction indicators - Specification (Second Revision) | 1 | ---- | Download | |
| 740 | IS 4063 : 1982 (1 Revision) |
Specification for fuse box for automobiles (First Revision) | 0 | ---- | Download | |
| 741 | IS 4086 : 1983 (1 Revision) |
Specification for distributors for spark ignition engines (First Revision) | 0 | ---- | Download | |
| 742 | IS 4300 : 1989 (1 Revision) |
Box pallets for through transit of goods - Specification (First Revision) | 1 | ---- | Download | |
| 743 | IS 4357 : 2017 (3 Revision) |
Industrial trucks - Counter balanced trucks with mast - Verification of stability (Third Revision) | 0 | ---- | Buy | |
| 744 | IS 4362 : 1979 (1 Revision) |
Specification for number plate lighting devices for automobiles (First Revision) | 2 | ---- | Download | |
| 745 | IS 4373 : 1967 |
Specification for hydraulically operated stop light switches for automobiles | 1 | ---- | Download | |
| 746 | IS 4374 : 1980/ISO 3913: 1977 (1 Revision) |
Specification for mild steel fabricated vertical bollards with and without lugs (First Revision) | 0 | ---- | Buy | |
| 747 | IS 4478 : 2007/ISO 8147: 1995 (2 Revision) |
Ships and marine structures - Derrick rigs and component parts - Vocabulary (Second Revision) | 0 | ---- | Buy | |
| 748 | IS 4484 : 2013/ISO 1704: 1991 (3 Revision) |
Shipbuilding - Electrically welded stud link anchor chains and connecting shackles and swivels - Specification (Third Revision) | 0 | ---- | Buy | |
| 749 | IS 4530 : 2006 (1 Revision) |
GeneraL requirements for positioning and routing of engine exhaust pipes in motor vehicles (First Revision) | 0 | ---- | Download | |
| 750 | IS 4549 : 1968 |
Specification for lifeboat compass - Liquid type | 0 | ---- | Download | |
| 751 | IS 4550 : 1968 |
Recommendation for positioning of magnetic compasses in ships | 0 | ---- | Download | |
| 752 | IS 4551 : 1968 |
Specification for lifeboat crutches | 0 | ---- | Download | |
| 753 | IS 4552 : Part 1 : 1993 (1 Revision) |
Automotive vehicles - Portable jacks for automobiles: Part 1 mechanical jacks - Specification (First Revision) | 0 | ---- | Download | |
| 754 | IS 4552 : Part 2 : 1993 (1 Revision) |
Automotive vehiclesportablejacksfor automobiles: Part 2 hydraulic jacks - Specification (First Revision) | 0 | ---- | Download | |
| 755 | IS 4568 : 2007 (1 Revision) |
Lifeboat oars (Wood) - Specification (First Revision) | 0 | ---- | Download | |
| 756 | IS/ISO 4570 : 2002 |
Tyre valve threads | 0 | ---- | Download | |
| 757 | IS 4581 : 2021/ISO 12097 - 1 (2 Revision) |
PHOSPHORUS TRICHLORIDE PURE AND ANALYTICAL REAGENT-SPECIFICATION Second Revision IS 4581 | 0 | ---- | Buy | |
| 758 | IS 4601 : Part 1 : 1968 |
Navigation lights for large sea - Going power - Driven vessels: Part 1 positioning and screening of lights | 0 | ---- | Download | |
| 759 | IS 4601 : Part 2 : 1968 |
Navigation lights for large sea - Going powerldriven vessels: Part 2 oil lanterns | 0 | ---- | Download | |
| 760 | IS 4602 : 1968 (1 Revision) |
General requirements and testing of lifeboats for less than one hundred persons | 0 | ---- | Download | |
| 761 | IS 4647 : 1998 (1 Revision) |
Inland vessels - Detachable steel ladder - Specification (First Revision) | 0 | ---- | Download | |
| 762 | IS 4659 : 1980/ISO 3652:1975 (1 Revision) |
Specification for wire rope reel for inland vessels (First Revision) | 0 | ---- | Buy | |
| 763 | IS 4660 : 1993 (3 Revision) |
Powered industrial trucks - Terminology (Third Revision) | 0 | ---- | Buy | |
| 764 | IS 4665 : Part 2 : Sec 1 : 2023/ISO 15865: 2022 |
Hand-Held Motor-Operated Electric Tools Safety Part 2 Particular requirements Section 1 drills and impact drills | 0 | ---- | Buy | |
| 765 | IS 4665 : Part 2 : Sec 2 : 2023/ISO 16091: 2018 |
Hand-held motor-operated electric tools - Safety - Part 2 Particular requirements Section 2 screwdrivers and impact wrenches | 0 | ---- | Buy | |
| 766 | IS 4690 : 2013 (1 Revision) |
Buoy shackles - Specification (First Revision) | 0 | ---- | Download | |
| 767 | IS 4692 : 2013 (2 Revision) |
Shipbuilding - Electrically welded studless link anchor chains and connecting shackles - Specification (Second Revision) | 0 | ---- | Download | |
| 768 | IS 4693 : 1968 |
Specification for steel accessories for marine piping systems | 1 | ---- | Download | |
| 769 | IS 4740 : 1979 (1 Revision) |
Code of Practice for Packaging of Steel Tubes | 0 | ---- | Download | |
| 770 | IS 4815 : 1982 (1 Revision) |
Specification for self - Cancelling direction indicator switches for automobiles (First Revision) | 0 | ---- | Download | |
| 771 | IS 4881 : 1968 |
Code of practice for design of shipboard mechanical ventilation trunking | 0 | ---- | Download | |
| 772 | IS 4884 : 2021/ISO 18185-1:2007 (1 Revision) |
STERILIZED / UHT STERILIZED CREAM – SPECIFICATION | 0 | ---- | Buy | |
| 773 | IS 4972 : Part 8 : 2022/ISO 14300-2:2011 |
Resistance spot welding Part 8 Materials for electrodes and ancillary equipment (First Revision of IS 4972) | 0 | ---- | Buy | |
| 774 | IS 4972 : Part 3 : 2022/ISO 10794: 2018 |
Resistance Spot Welding Part 3 Electrode Holders — Parallel Shank Fixing For End Thrust (First revision of IS 4972) | 0 | ---- | Buy | |
| 775 | IS 5008 : Part 1 : 1987 (1 Revision) |
Data sheet for industrial towing trucks: Part 1 I.C. engine powered | 1 | ---- | Download | |
| 776 | IS 5112 : 1972 (1 Revision) |
General requirements and testing of ac cargo winches (for shipboard use) (First Revision) | 0 | ---- | Download | |
| 777 | IS/ISO 5116 : Part 2 : 2021 |
Improving transparency in financial and business reporting Harmonization topics - Part 2: Guidelines for data point modelling | 0 | ---- | Download | |
| 778 | IS 5118 : 1969 |
Pecification for constructional details of ventilation trunking for shipboard use | 0 | ---- | Download | |
| 779 | IS 5130 : 1969 |
Specification for drums fitted to cargo and mooring winches | 0 | ---- | Download | |
| 780 | IS 5221 : 1997 (1 Revision) |
Shipbuilding - Bearings for derrick gooseneck - Assemblies and components - Specification (First Revision) | 0 | ---- | Download | |
| 781 | IS 5240 : 1969 |
SpeclFication for cast skew bollards | 0 | ---- | Download | |
| 782 | IS 5269 : 1987 (1 Revision) |
Specification for access hatches for inland vessels (First Revision) | 0 | ---- | Download | |
| 783 | IS 5289 : 1989 (1 Revision) |
Shipbuilding - Magnetic compasses and binnacles - Glossary of terms (First Revision) | 0 | ---- | Buy | |
| 784 | IS 5314 : 1986 (1 Revision) |
Specification for graduated drinking vessels for lifeboats and liferafts for sea - Going ships (First Revision) | 0 | ---- | Download | |
| 785 | IS 532 : 2006 (3 Revision) |
Bicycle tube valves and valve - Tubing - Specification (Third Revision) | 0 | ---- | Download | |
| 786 | IS 5325 : 1989 (1 Revision) |
Box pallets for through transit of goods - Methods of Test (First Revision) | 1 | ---- | Download | |
| 787 | IS 5326 : 2007 (1 Revision) |
Life - Buoys - Specification (First Revision) | 0 | ---- | Download | |
| 788 | IS 5327 : 1969 |
Specification for rigid bailers for lifeboats | 0 | ---- | Download | |
| 789 | IS 5376 : 1969 |
Specification for dioptric lenses for navigational lanterns | 0 | ---- | Download | |
| 790 | IS 5385 : 2007 (1 Revision) |
Lifeboat accessories - Specification (First Revision) | 0 | ---- | Download | |
| 791 | IS 5386 : 1969 |
General purpose Ship's Davit | 0 | ---- | Download | |
| 792 | IS 5423 : 1989 (2 Revision) |
Automotive vehicles - Shock absorbers - Specification (Second Revision) | 2 | ---- | Download | |
| 793 | IS 5432 : 2022/ISO 14621-2:2019 (2 Revision) |
POWDER METALLURGY-VOCABULARY | 0 | ---- | Buy | |
| 794 | IS 5439 : 2017 (2 Revision) |
Oil pressure switches for automobiles - Specification (Second Revision) | 0 | ---- | Download | |
| 795 | IS 5474 : 2012 (2 Revision) |
Shipbuilding - Ships side scuttles | 0 | ---- | Download | |
| 796 | IS 5545 : 1977 (1 Revision) |
Specification for fog lights for automobiles (First Revision) | 0 | ---- | Download | |
| 797 | IS 5546 : 1981 (1 Revision) |
Specification for distribution caps and rotor arms for automobiles (First Revision) | 0 | ---- | Download | |
| 798 | IS 5562 : 2000 (2 Revision) |
Automotive vehicles - Fuel gauges - Cross coil movement type - Specification (Second Revision) | 0 | ---- | Download | |
| 799 | IS 5577 : 2015 (2 Revision) |
Automotive vehicles - Ammeters - Specification (Third Revision) | 0 | ---- | Download | |
| 800 | IS 5625 : 1970 |
Specification for cast cruciform bollards | 0 | ---- | Download | |
| 801 | IS 5628 : 1970 |
Specification for cast deck - End rollers | 1 | ---- | Download | |
| 802 | IS 5791 : 2006/ISO 6621-3:2000 (3 Revision) |
Internal combustion engines - Piston rings - Material specifications (Third Revision) | 0 | ---- | Buy | |
| 803 | IS 582 : Part 10 : Sec 3 : 2022/ISO 12614-16:2021 |
METHODS OF CHEMICAL TESTING OF LEATHER Part 10 Determination of chromic oxide content Section 3 Quantification by atomic absorption spectrometry | 0 | ---- | Buy | |
| 804 | IS 5858 : Part 2 : 1970 |
Specification for accessories to mechanical ventilation systems on board ships: Part 2 smoke protecting flap valves | 0 | ---- | Download | |
| 805 | IS 5858 : Part 1 : 1970 |
Accessories to Mechanical Ventilation Systems on Board Ships - Part I : Non-return Valves | 0 | ---- | Download | |
| 806 | IS 5858 : Part 3 : 1970 |
Specification for accessories to mechanical ventilation systems on board ships: Part 3 control dampers | 0 | ---- | Download | |
| 807 | IS 5859 : 1970 |
Specification for tools for handling of anchor chains and attachments | 0 | ---- | Download | |
| 808 | IS 5875 : 1970 |
Specification for open - Deck scuppers | 1 | ---- | Download | |
| 809 | IS 5876 : 2008 (1 Revision) |
Shipbuilding - Hopper scuppers (First Revision) | 0 | ---- | Download | |
| 810 | IS 5914 : Part 2 : Sec 1 : 2022/ISO 13215-1 : 2006 (1 Revision) |
Methods of Physical Testing of Leather Part 2 Determination of Abrasion Resistance Section 1 Taber Method | 0 | ---- | Buy | |
| 811 | IS 5976 : 1971 |
Specification for ships punkah - Louvres | 0 | ---- | Download | |
| 812 | IS/IEC 60079 Part 26 : 2021/21266-2: 2018 (2 Revision) |
Explosive atmospheres - Part 26: Equipment with Separation Elements or combined Levels of Protection (Second Revision) | 0 | ---- | Buy | |
| 813 | IS/IEC/TS 60079 : Part 40 : 2015/ISO 17480 : 2015 |
Explosive atmospheres Part 40: Requirements for process sealing between flammable process fluids and electrical systems | 0 | ---- | Buy | |
| 814 | IS/IEC 60695 : Part 2 : Sec 13 : 2021 (1 Revision) |
Fire Hazard Testing Part 2 GlowingHot wire based test methods Section 13 Glow-wire ignition temperature GWIT test method for materials | 0 | ---- | Download | |
| 815 | IS/IEC 60721 : Part 3 : Sec 0 : 2020/ISO 12217-3:2022 |
Classification of Environmental Conditions Part 3 Classification of groups of environmental parameters and their severities Section 0 Introduction | 0 | ---- | Buy | |
| 816 | IS/IEC 60721 : Part 2 : Sec 4 : 2018/ISO 12217-1:2022 |
Classification of Environmental Conditions Part 2 Environmental Conditions appearing in nature Section 4 Solar Radiation and Temperature | 0 | ---- | Buy | |
| 817 | IS/IEC 60721 : Part 2 : Sec 7 : 2018/ISO 12217-2:2022 |
Classification of Environmental Conditions Part 2 Environmental Conditions appearing in nature Section 7 Flora and Fauna | 0 | ---- | Buy | |
| 818 | IS/IEC 61196 : Part 1 : Sec 106 : 2008/ISO 6185-3:2014 |
Coaxial communication cables Part 1-106 Electrical Test Methods — Test for Withstand Voltage of Cable Sheath | 0 | ---- | Buy | |
| 819 | IS 6140 : 1971 |
Specification for ships snatch blocks | 0 | ---- | Download | |
| 820 | IS 6141 : 1971 |
Specification for ships single sheave blocks without becket | 0 | ---- | Download | |
| 821 | IS 6142 : 1971 |
Specification for ships single sheave blocks with becket | 0 | ---- | Download | |
| 822 | IS 6148 : 1971 |
Specification for head fittings and round nuts used with ships blocks | 0 | ---- | Download | |
| 823 | IS 6176 : 1971 |
Steel Ladders for Ship's Use | 0 | ---- | Download | |
| 824 | IS 6180 : 1989/ISO 614 & ISO 1095: 1976 (1 Revision) |
Toughened Safety Glasses for Ships' Round Windows | 0 | ---- | Buy | |
| 825 | IS 6195 : 1971 |
Specification for cast open chocks | 0 | ---- | Download | |
| 826 | IS 6204 : 1971 |
Specification for cast open roller fairleads | 0 | ---- | Download | |
| 827 | IS/IEC 62137 : Part 4 : 2014 |
Electronics assembly technology Part 4 Endurance test methods for solder joint of area array type package surface mount devices | 0 | ---- | Download | |
| 828 | IS 6218 : 2008 (1 Revision) |
Bicycle - Mudguards - Specification (First Revision) | 0 | ---- | Download | |
| 829 | IS 623 : 2008 (3 Revision) |
Bicycle - Bicycle frames - Specification (Third Revision) | 2 | ---- | Download | |
| 830 | IS/IEC/TR 62351 : Part 13 : 2016 |
Power systems management and associated information exchange - Data and communications security Part 13: Guidelines on security topics to be covered in standards and specifications | 0 | ---- | Download | |
| 831 | IS 626 : 2009 (2 Revision) |
Bicycle - Seat pillars - Specification (Third Revision) | 0 | ---- | Download | |
| 832 | IS/IEC 62680 : Part 2 : Sec 2 : 2015 |
Universal Serial Bus Interfaces for Data and Power Part 2-2: Micro-USB Cables and Connectors Specification | 0 | ---- | Download | |
| 833 | IS 6277 : 1971 |
Specification for cast mud box | 0 | ---- | Download | |
| 834 | IS 630 : 2005 (3 Revision) |
Bicycle spokes (Plain) and nipples for spokes - Specification (Third Revision) | 1 | ---- | Buy | |
| 835 | IS 6305 : Part 1 : 1980 (1 Revision) |
Safety code for powered industrial trucks: Part 1 application, operation and maintenance (First Revision) | 0 | ---- | Buy | |
| 836 | IS 6305 : Part 2 : 1980 (1 Revision) |
Safety code for powered industrial trucks: Part 2 manufacture | 0 | ---- | Buy | |
| 837 | IS 6566 : 2020/ISO 668 : 2013 (4 Revision) |
Series 1 Freight Containers — Classification, Dimensions and Ratings ( Fourth Revision ) | 0 | ---- | Buy | |
| 838 | IS 6569 : 2004/ISO 830:1999 (3 Revision) |
Freight containers - Vocabulary (Third Revision) | 0 | ---- | Buy | |
| 839 | IS/ISO 6621 : Part 1 : 2018/ISO 6621-1:2018 (1 Revision) |
Internal Combustion Engines — Piston Rings Part 1 Vocabulary ( First Revision ) | 0 | ---- | Buy | |
| 840 | IS 6634 : 1972 |
Specification for multi - Purpose closed chocks | 0 | ---- | Download | |
| 841 | IS 6636 : 1972 |
Specification for hood for air pipes of ships piping systems | 0 | ---- | Download | |
| 842 | IS 6640 : 1972 |
Specification for toughened safety glasses for ships windows | 0 | ---- | Download | |
| 843 | IS 6645 : 1972 |
Specification for service nameplates for marine valves and fittings | 0 | ---- | Download | |
| 844 | IS 6675 : 1972 |
Specification for cable lifters for windlasses | 0 | ---- | Download | |
| 845 | IS 6685 : 2009 (1 Revision) |
Life jackets - Specification (First Revision) | 0 | ---- | Download | |
| 846 | IS 6691 : 1972 |
Specification for cast closed roller fairleads | 0 | ---- | Download | |
| 847 | IS/ISO 6722 : Part 2 : 2013/ISO 6722-2:2013 |
Road vehicles - 60 V and 600 V single - Core cables: Part 2 dimensions, test methods and requirements for aluminium conductor cables (First Revision) | 0 | ---- | Buy | |
| 848 | IS 6722 : 1972 |
Dimensions for aircraft jacking pads | 0 | ---- | Buy | |
| 849 | IS 6723 : 1972 |
Recommendations for aircraft instrument dials and pointers | 0 | ---- | Buy | |
| 850 | IS 6725 : 2008/ISO 245:1998 (1 Revision) |
Aerospace - Lockwire - Diameters (First Revision) | 1 | ---- | Buy | |
| 851 | IS 6740 : 1985 (1 Revision) |
Specification for gudgeon pins for internal combustion engines (First Revision) | 1 | ---- | Download | |
| 852 | IS 6741 : 1972 |
Numerals for aircraft instrument dials and number plates | 0 | ---- | Buy | |
| 853 | IS 6742 : 2013/ISO 43 : 1976 (1 Revision) |
Aircraft - Jacking pads (First Revision) | 0 | ---- | Buy | |
| 854 | IS 6743 : 1972 |
Sizes and mounting dimensions of aircraft instrument cases (Rear - Mounting Type) | 0 | ---- | Buy | |
| 855 | IS 6750 : 1985 (1 Revision) |
Specification for cylinder liners for internal combustion engines (First Revision) | 0 | ---- | Download | |
| 856 | IS 6753 : 1972 |
Code for identification of aircraft pipelines | 0 | ---- | Buy | |
| 857 | IS 6763 : Part 2 : 1987 (1 Revision) |
Specification and testing for fifth wheel king pin for semi - Trailers: Part 2 size 90 (First Revision) | 1 | ---- | Buy | |
| 858 | IS 6763 : Part 1 : 1987 (1 Revision) |
Specification and testing for fifth wheel king pin for semi - Trailers: Part 1 size 50 (First Revision) | 1 | ---- | Buy | |
| 859 | IS 6765 : Part 1 : 2003 (1 Revision) |
Powered industrial trucks - Parameters for designation of rated capacity and capacity: Part 1 powered high lift trucks (First Revision) | 0 | ---- | Download | |
| 860 | IS 6800 : 1972 |
Dimensions for aircraft tow bar connections to tractors | 0 | ---- | Buy | |
| 861 | IS 6865 : 1973 |
Specification for pallets for use in ISO series 1 freight containers | 0 | ---- | Download | |
| 862 | IS 6876 : 2019 (2 Revision) |
Fork - Lift trucks - Fork arms - Technical characteristics and testing (Second Revision) | 0 | ---- | Download | |
| 863 | IS 6928 : 2001/ISO 6346:1995 (3 Revision) |
Freight containers - Coding, identification and marking (Third Revision) | 0 | ---- | Buy | |
| 864 | IS 6963 : 1973 |
Pictorial marking on packages containing photographic materials sensitive to radiant energy | 0 | ---- | Download | |
| 865 | IS 7001 : 2017 (2 Revision) |
Springs - Shot peening - General procedures (Second Revision) | 0 | ---- | Buy | |
| 866 | IS 7016 : Part 3 : Sec 1 : 2022/ISO 12614-1:2021 (2 Revision) |
Methods of Test for Rubber or Plastics Coated Fabrics Part 3 Determination of Tear Resistance Section 1 Constant Rate of Tear Methods (Third Revision) | 0 | ---- | Buy | |
| 867 | IS 7028 : Part 2 : 2002/ISO 2247:2000 (2 Revision) |
Performance tests for complete, filled transport packages: Part 2 vibration test at fixed low frequency (Second Revision) | 0 | ---- | Buy | |
| 868 | IS 7028 : Part 4 : 1987/ISO 2248:1985 (1 Revision) |
Performance tests for complete, filled transport packages part4 vertical impact drop (First Revision) | 0 | ---- | Buy | |
| 869 | IS 7028 : Part 6 : 1987/ISO 2872:1985 (1 Revision) |
Performance tests for complete, filled transport packages: Part 6 compression test (First Revision) | 0 | ---- | Buy | |
| 870 | IS 7028 : Part 8 : 2002/ISO 2875:2000 (2 Revision) |
Performance tests for complete, filled transport packages: Part 8 water spray test (Second Revision) | 0 | ---- | Buy | |
| 871 | IS 7028 : Part 1 : 2002/ISO 2234:2000 (2 Revision) |
Performance tests for complete, filled transport packages: Part 1 stacking tests using static load (Second Revision) | 0 | ---- | Buy | |
| 872 | IS 7028 : Part 11 : 1986/ISO 8768:1987 |
Performance tests for complete filled transport packages: Part 11 toppling test | 0 | ---- | Buy | |
| 873 | IS 7028 : Part 12 : 2002/ISO 8318:2000 (2 Revision) |
Performance tests for complete, filled transport packages: Part 12 vibration test using a sinusoidal variable frequency (First Revision) | 0 | ---- | Buy | |
| 874 | IS 7028 : Part 3 : 2002/ISO 2244:2000 (2 Revision) |
Performance tests for complete, filled transport packages: Part 3 horizontal impact tests (Horizontal Or Inclined Test, Pendulum Test) (second Revision) | 0 | ---- | Buy | |
| 875 | IS 7028 : Part 5 : 1987/ISO 2876:1985 (1 Revision) |
Performance tests for complete, filled transport packages: Part 5 rolling test (First Revision) | 0 | ---- | Buy | |
| 876 | IS 7028 : Part 7 : 2002/ISO 2873:2000 (2 Revision) |
Performance tests for complete, filled transport packages: Part 7 low pressure test (Second Revision) | 0 | ---- | Buy | |
| 877 | IS 7028 : Part 10 : 1986/ISO 8474:1986 |
Performance tests for complete filled transport packages: Part 10 water immersion test | 0 | ---- | Buy | |
| 878 | IS 7030 : 1988 (1 Revision) |
Identification of parts for complete, filled transport packages when testing (First Revision) | 0 | ---- | Buy | |
| 879 | IS 7031 : 2002/ISO 2233:2000 (2 Revision) |
Method of conditioning for testing of complete, filled transport packages (Second Revision) | 0 | ---- | Buy | |
| 880 | IS 7046 : 1993 (1 Revision) |
Inland vessels - Harbour tugs - Guide for selection (First Revision) | 0 | ---- | Download | |
| 881 | IS 7048 : 2006/ISO 5778:1998 (2 Revision) |
Ships and marine technology - Small weathertight steel hatches (Second Revision) | 0 | ---- | Buy | |
| 882 | IS 7073 : Part 1 : 1973 |
Glossary of terms relating to air cargo pallets and containers: Part 1 air cargo pallets | 1 | ---- | Download | |
| 883 | IS 7073 : Part 2 : 1983 |
Glossary of terms relating to air cargo pallets and containers: Part 2 air cargo containers | 0 | ---- | Download | |
| 884 | IS 7074 : 1999/ISO 4171 : 1993 (2 Revision) |
Air cargo equipment - Interline pallets (Second Revision) | 0 | ---- | Buy | |
| 885 | IS 7079 : 2008 (3 Revision) |
Automotive vehicles - Brake hose assemblies forhydraulicbraking systems used with non - Petroleum base brake fluid specification (Third Revision) | 2 | ---- | Download | |
| 886 | IS 7131 : 2022/ISO 14620-1: 2018 (1 Revision) |
Nitrophosphate Based Granulated Fertilizers | 0 | ---- | Buy | |
| 887 | IS 7185 : 2022/ISO 22705-2: 2023 (2 Revision) |
MILK BOILER - SPECIFICATION | 0 | ---- | Buy | |
| 888 | IS 7217 : 1990 (1 Revision) |
Classification and nomenclature of powered industrial trucks (First Kevisim) | 0 | ---- | Buy | |
| 889 | IS 7257 : 2022/ISO/TS 22239-2 : 2018 (1 Revision) |
Steel Trunk - Specification | 0 | ---- | Buy | |
| 890 | IS 726 : 2022/ISO 13215-3 : 2022 (4 Revision) |
Galvanized Steel Buckets for General Use - Specification | 0 | ---- | Buy | |
| 891 | IS 7304 : Part 2 : 1973 |
Code for fabrication, installation and testing of salt water piping system for shipboard use: Part 2 nonferrous systems | 0 | ---- | Download | |
| 892 | IS 7304 : Part 1 : 1978 |
Code for fabrication, installation and testing of salt water piping system for shipboard use: Part 1 general requirements | 0 | ---- | Download | |
| 893 | IS 7304 : Part 3 : 1973 |
Code for fabrication, installation and testing of salt water piping system for ship board use: Part 3 ferrous systems | 0 | ---- | Download | |
| 894 | IS 7309 : 2018/ISO 22915-3 : 2014 (2 Revision) |
Industrial trucks - Verification of stability reach and straddle trucks (Second Revision) | 0 | ---- | Buy | |
| 895 | IS 7347 : 1974 |
SPECIFICATION FOR PERFORMANCE OF SMALL SIZE SPARK IGNITION ENGINES FOR AGRICULTURAL WATER PUMPS, SPRAYERS, TILLERS, REAPERS AND OTHER SIMILAR APPLICATIONS | 4 | ---- | Download | |
| 896 | IS 7363 : 1993 (1 Revision) |
Inland vessels - Tests and trials for harbour tugs (FIrst Revision) | 0 | ---- | Download | |
| 897 | IS 7411 : Part 2 : 1974 |
Ships' Intermediate Shafts (Integral Flange) - Part II : For Sea-going Vessels | 0 | ---- | Download | |
| 898 | IS 7411 : Part 1 : 1974 |
Ships' Intermediate Shafts (Integral Flange) - Part I : For Port Crafts | 0 | ---- | Download | |
| 899 | IS 7438 : 2022/ISO 16290: 2013 (2 Revision) |
Metallic powders Determination of acid-insoluble content in iron copper tin and bronze powders | 0 | ---- | Buy | |
| 900 | IS 7449 : Part 1 : 1974 |
Glossary of terms for IC engines: Part 1 fuel injection equipment | 0 | ---- | Download | |
| 901 | IS 7451 : Part 1 : 2020/ISO 2710-1:2017 (2 Revision) |
Reciprocating Internal Combustion Engines — Vocabulary Part 1 Terms for Engine Design and Operation ( Second Revision ) | 0 | ---- | Buy | |
| 902 | IS 7451 : Part 2 : 2006/ISO 1204:1990 (1 Revision) |
Reciprocating internal combustion engines: Part 2 designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right - Hand and left - Hand in - Line engines and locations on an engine (First Revision) | 0 | ---- | Buy | |
| 903 | IS 7451 : Part 6 : 2007/ISO 2261:1994 (1 Revision) |
Reciprocating internal combustion engines: Part 6 hand - Operated control devices - Standard direction of motion (First Revision) | 0 | ---- | Buy | |
| 904 | IS 7513 : Part 3 : 2021/ISO 18185-3:2015 |
Fluid Power Systems and Components Graphical Symbols and Circuit Diagrams Part 3 Symbol modules and connected symbols in circuit diagrams ICS 0108030 2310001 Adoption of ISO 1219-3 : 2016 | 0 | ---- | Buy | |
| 905 | IS 7525 : 2017/ISO 2328: 2011 (2 Revision) |
Fork - Lift trucks - Hook - On type fork arms and fork arm carriages - Mounting dimensions (Second Revision) | 0 | ---- | Buy | |
| 906 | IS 7553 : 2003 (1 Revision) |
Control symbols for powered industrial trucks - Specification (First Revision) | 0 | ---- | Buy | |
| 907 | IS 7611 : 1993 (1 Revision) |
Internal combustion engines radiators - Specification (First Revision) | 0 | ---- | Download | |
| 908 | IS 7621 : 2018/ISO 6055:1997 (2 Revision) |
Industrial trucks - Overhead guards - Specification and testing (Second Revision) | 0 | ---- | Buy | |
| 909 | IS 7657 : Part 1 : 1975 |
Specification for starter ring gears for internal combustion engines: Part 1 gears for inertia and solenoid pre - Engaged starters | 1 | ---- | Download | |
| 910 | IS 7705 : 1975 |
Code of practice for packaging of precision and special purpose steel tubes | 1 | ---- | Download | |
| 911 | IS 7723 : 1975 |
Ships' Flag Staff | 0 | ---- | Download | |
| 912 | IS 7774 : Part 2 : 2003 (1 Revision) |
Glossary of terms relating to transport tractors and trailers: Part 2 dimensions (First Revision) | 0 | ---- | Download | |
| 913 | IS 7774 : Part 1 : 1975 |
Glossary of terms relating to transport tractors and trailers: Part 1 basic terms | 1 | ---- | Download | |
| 914 | IS 7804 : 1983 (1 Revision) |
Guide for palletization of tea - Chests (First Revision) | 0 | ---- | Download | |
| 915 | IS 7827 : Part 3 : Sec 1 : 1993 |
Automotive vehicles electrical wiNd screEn wipers: Part 3 wiper arms and blades section 1 wiper arms - Specification | 0 | ---- | Download | |
| 916 | IS 7827 : Part 2 : 1975 |
Specification for electrical wind screin wipers: Part 2 wiper motors | 1 | ---- | Download | |
| 917 | IS 7827 : Part 3 : Sec 2 : 1985 |
Specification for electrical wind screen wiper: Part 3 wiper arms and blades section 2 wiper blades | 0 | ---- | Download | |
| 918 | IS 7827 : Part 1 : 1975 |
Specification for electrical wind screen wipers: Part 1 wiper system | 1 | ---- | Download | |
| 919 | IS 7828 : 2008/ISO 102:1990 (1 Revision) |
Aircraft - Gravity filling orifices (First Revision) | 0 | ---- | Buy | |
| 920 | IS 7829 : 1975 |
Marking of aircraft gas cylinders | 0 | ---- | Buy | |
| 921 | IS 7831 : 1975 |
Dimensions of aircraft lubricating nipples | 0 | ---- | Buy | |
| 922 | IS 7832 : 1975 |
Dimensions for aircraft connections for ground air - Conditioning | 0 | ---- | Buy | |
| 923 | IS 7855 : 2011/ISO/TR 224 : 1998 (1 Revision) |
Aircraft - Declaration of design and performance for aircraft equipment - Standard form (First Revision) | 0 | ---- | Buy | |
| 924 | IS 7864 : Part 2 : 1979 |
SpecificAtion for . upholstrey springs: Part 2 ziGzag type | 0 | ---- | Download | |
| 925 | IS 7864 : Part 1 : 1975 |
Specification for upholstery springs 1: Part 1 conical type | 0 | ---- | Download | |
| 926 | IS 7906 : Part 1 : 1997 (1 Revision) |
Helical compression springs: Part 1. design and calculation for springs made from circular section wire and bar (First Revision) | 0 | ---- | Download | |
| 927 | IS 7906 : Part 4 : 1987 |
Helical compression springs: Part 4 selection of standard cold coiled springs made from circular section wire and bar | 0 | ---- | Download | |
| 928 | IS 7906 : Part 6 : 1978 |
Helical compression springs: Part 6 design and calculations for springs made from rectangular section bar - Steel | 0 | ---- | Download | |
| 929 | IS 7906 : Part 8 : 1989 |
Helical compression springs: Part 8 method of inspection of hotcoiled compression springs made from circular section bars | 0 | ---- | Download | |
| 930 | IS 7906 : Part 2 : 1975 |
Helical compression springs: Part 2 specification for cold coiled springs made from circular section wire an d bar | 1 | ---- | Download | |
| 931 | IS 7906 : Part 5 : 2004 (2 Revision) |
Helical compression springs: Part 5 hot coiled springs made from circular section bars - Specification (Second Revision) | 1 | ---- | Download | |
| 932 | IS 7906 : Part 7 : 1989 |
Helical compression springs: Part 7 quality requirements for cylindrical coil compression springs used mainly as vehicle suspension springs | 0 | ---- | Download | |
| 933 | IS 7907 : Part 3 : 1975 |
Helical extension springs: Part 3 data sheet for specifications for springs made from circular section wire and bar | 0 | ---- | Download | |
| 934 | IS 7907 : Part 2 : 1976 |
Helical extension springs: Part 2 specification for cold coiled springs made from circular section wire and bar | 0 | ---- | Download | |
| 935 | IS 7907 : Part 4 : 1987 |
Specification for helical extension springs: Part 4 selection of standard cold coiled springs made - From circular section wire and bar | 0 | ---- | Download | |
| 936 | IS 7907 : Part 1 : 2004 (1 Revision) |
Helical extension springs october 2004: Part 1 design and calculation for springs made from circular section wire and bar (First Revision) | 0 | ---- | Download | |
| 937 | IS 7915 : 1976 |
Dimensions for connections for aircraft ground electrical supplies | 0 | ---- | Download | |
| 938 | IS 7917 : 1994/ISO 8323:1985 (1 Revision) |
Freight containers - Air/surface (Intermodal) general purpose containers - specification and tests (First Revision) | 0 | ---- | Buy | |
| 939 | IS 7937 : 2012 (3 Revision) |
Shipbuilding - Sea - Going vessels - Windlasses and anchor capstans (Third Revision) | 0 | ---- | Buy | |
| 940 | IS 7953 : 1976 |
Specification for horn rings for automobiles | 1 | ---- | Download | |
| 941 | IS 7960 : Part 1 : 1976 |
Code of practice for packaging machine tools: Part 1 for overseas shipment | 0 | ---- | Download | |
| 942 | IS 7998 : 1986 (1 Revision) |
Specification for contact breakers for two wheelers, three wheelers and stationary spark ignition engines (First Revision) | 2 | ---- | Download | |
| 943 | IS 8006 : 1988 (1 Revision) |
Recommendations for handling of timber pallets (First Revision) | 0 | ---- | Download | |
| 944 | IS 8013 : 1985 (1 Revision) |
Specification for performance requirements and testing of marine diesel engines for fishing vessels (First Revision) | 0 | ---- | Download | |
| 945 | IS 802.15.9 : 2021/ISO/TS 18625:2017 |
Recommended Practice for Transport of Key Management Protocol KMP Datagrams | 0 | ---- | Buy | |
| 946 | IS 8037 : 2005 (1 Revision) |
General requirements for transport tractor - Trailers (First Revision) | 0 | ---- | Download | |
| 947 | IS/IEC 80601 : Part 2 : Sec 49 : 2018/ISO 12097-3 |
Medical electrical equipment Part 2- Particular requirements for basic safety and essential performance- Sec 49 Multifunction patient monitors | 0 | ---- | Buy | |
| 948 | IS 8066 : Part 3 : 2020/ISO 22915-7 : 2016 |
Rubber and Plastics Hoses and Hose assemblies for Automotive Air Conditioning Specification Part 3 Refrigerant 1234yf | 0 | ---- | Buy | |
| 949 | IS 810 : 1991 (2 Revision) |
Internal combustion engines - Engine valves - Specification (Second Revision) | 0 | ---- | Download | |
| 950 | IS 8114 : 1984 (1 Revision) |
Guidelines for machining dimensions of propeller hubs with keyway (First Revision) | 0 | ---- | Download | |
| 951 | IS 8116 : 1976 |
Specification for moped spokes and nipples for spokes | 0 | ---- | Download | |
| 952 | IS 8118 : 2008 (3 Revision) |
Automotive vehicles - Opacity (Smoke) of exhuast gas from vehicles equipped with compression ignition engines operating under free acceleration - Method of measurement (Third Revision) | 0 | ---- | Download | |
| 953 | IS 8141 : 1976 |
Tolerances for screw threads used in aeronautics | 0 | ---- | Download | |
| 954 | IS 8172 : 1976/ISO 3797: 1976 |
Specification for vertical steel ladders | 0 | ---- | Buy | |
| 955 | IS 8173 : 1984 (1 Revision) |
Specification for propeller shafts (With Keyway) of diameter 20 to 160 mm (First Revision) | 1 | ---- | Download | |
| 956 | IS/ISO 8178 : Part 8 : 2015/ISO 8178-8:1994 |
Reciprocating internal combustion engines - Exhaust emission measurement: Part 8 engine group determination | 0 | ---- | Buy | |
| 957 | IS/ISO 8178 : Part 7 : 2015/ISO 8178-7:2015 (1 Revision) |
Reciprocating internal combustion engine - Exhaust emission measurement: Part 7 engine family determination (First Revision) | 0 | ---- | Buy | |
| 958 | IS 8214 : Part 3 : 1976 |
Glossary of ships' hydrodynamic terms, Part 3 Resistance and propulsion | 0 | ---- | Download | |
| 959 | IS 8214 : Part 5 : 1976 |
Glossary of ships' hydrodynamic terms, Part 5 Manoeuvrability | 0 | ---- | Download | |
| 960 | IS 8214 : Part 6 : 1976 |
Glossary of ships' hydrodynamic terms, Part 6 Strength and vibration | 0 | ---- | Download | |
| 961 | IS 8214 : Part 1 : 1976 |
Glossary of ships' hydrodynamic terms, Part 1 Basic quantities | 1 | ---- | Download | |
| 962 | IS 8214 : Part 4 : 1976 |
Glossary of ships' hydrodynamic terms, Part 4 Sea keeping | 0 | ---- | Download | |
| 963 | IS 8214 : Part 2 : 1976 |
Glossary of Ships' Hydrodynamic Terms - Part II : Ship Geometry | 0 | ---- | Download | |
| 964 | IS 8215 : Part 2 : 2007/ISO 3715-2: 2001 (1 Revision) |
Ships and marine technology - Propulsion plants for ships: Part 2 vocabulary for controllable - Pitch propeller (First Revision) | 0 | ---- | Buy | |
| 965 | IS 8215 : Part 1 : 2007/ISO 3715-1: 2002 (1 Revision) |
Ships and marine technology - Propulsion plants for ships: Part 1 vocabulary for geometry of propellers (First Revision) | 0 | ---- | Buy | |
| 966 | IS 8252 : Part 10 : 1979 |
Environmental tests for aircraft equipment: Part 10 salt mist | 0 | ---- | Download | |
| 967 | IS 8252 : Part 8 : 1979 |
Environmental tests for aircraft equipment: Part 8 change of temperature | 0 | ---- | Download | |
| 968 | IS 8252 : Part 1 : 1976 |
Environmental tests for aircraft equipment: Part 1 general | 0 | ---- | Download | |
| 969 | IS 8252 : Part 21 : 1986 |
Environmental tests for aircraft equipment: Part 21 explosion proofness | 0 | ---- | Download | |
| 970 | IS 8252 : Part 4 : 1980 |
Environmental tests for aircraft equipment: Part 4 ice formatiOn | 0 | ---- | Download | |
| 971 | IS 8252 : Part 11 : 1976 |
Environmental - Tests for aircraft - Equipment: Part 11 differential pressure | 0 | ---- | Download | |
| 972 | IS 8252 : Part 3 : 1978 |
Environmental tests for aircraft equipment: Part 3 humidity (24 - Hour Cycle) | 0 | ---- | Download | |
| 973 | IS 8252 : Part 18 : 1986 (1 Revision) |
Environmental tests for aircraft equipment: Part 18 magnetic influence (First Revision) | 0 | ---- | Download | |
| 974 | IS 8252 : Part 14 : 1982 |
Environmental tests for aircraft equipment: Part 14 mechanical vibration | 0 | ---- | Download | |
| 975 | IS 8252 : Part 6 : 1976 |
Environmental tests for aircraft equipment: Part 6 waterproofness | 0 | ---- | Download | |
| 976 | IS 8252 : Part 2 : 1980 |
Environmental tests for aircraft equipment: Part 2 temperature, pressure and humidity | 0 | ---- | Download | |
| 977 | IS 8252 : Part 16 : 1979 |
Environmental tests for aircraft equipment: Part 16 shock | 0 | ---- | Download | |
| 978 | IS 8296 : 1976 |
Specification for towing jaw for use between trailers of up to 35 tonnes gross mass and transport tractor | 0 | ---- | Download | |
| 979 | IS 8298 : 1976 |
Specification for towing jaw for use between trailers of up to 5 tonnes gross mass and transport tractor | 0 | ---- | Download | |
| 980 | IS 8299 : 1976 |
Specification for towing hook for use between trailers of up to 16 tonnes gross mass and transport tractor | 0 | ---- | Download | |
| 981 | IS 8300 : 1976 |
Specification for towing hook for use between trailers of up to 35 tonnes gross mass and transport tractor | 0 | ---- | Download | |
| 982 | IS 8339 : 1993 (1 Revision) |
Automotive vehicles - Reflex reflectors - Specification (First Revision) | 0 | ---- | Download | |
| 983 | IS 8354 : 1977 |
Code of practice for packaging of electric fans | 1 | ---- | Download | |
| 984 | IS 8355 : 1977 |
Code of practice for packaging of sewing machine for household purposes | 0 | ---- | Download | |
| 985 | IS 8373 : Part 1 : 1991 (1 Revision) |
Steel launches - Specification: Part 1 single hull passenger ferry launches (First Revision) | 0 | ---- | Download | |
| 986 | IS 8395 : Part 2 : 1977 |
Specification for cable terminations for automobile wiring: Part 2 bullet and tube connectors | 1 | ---- | Download | |
| 987 | IS 8395 : Part 1 : 1977 |
Specification for cable terminations for automobile wiring: Part 1 blade type connectors (Male And Female) | 1 | ---- | Download | |
| 988 | IS 8396 : 1977 |
Specification for air cargo base sandwich panel | 0 | ---- | Download | |
| 989 | IS 8411 : 1977 |
Specification for foot tyre inflators for road vehicles | 0 | ---- | Download | |
| 990 | IS 8422 : Part 8 : 1977 |
Specification for piston rings for IC engines: Part 8 narrow land slotted oil control rings from 50 up to 200 mm nominal diameter D - Rings | 0 | ---- | Download | |
| 991 | IS 8422 : Part 2 : 1977 |
Specification for piston rings for IC engines: Part 2 taper faced compression rings from 30 up to 200 mm nominal diameter M - Rings | 0 | ---- | Download | |
| 992 | IS 8422 : Part 4 : 1977 |
Specification for piston rings for IC engines: Part 4 napier oil scraper rings from 30 up to 200 mm nominal diameter N - Rings | 0 | ---- | Download | |
| 993 | IS 8422 : Part 6 : 1977 |
Specification for piston rings for IC engines: Part 6 slotted oil control rings from 50 up to 200 mm nominal diameter S - Rings | 0 | ---- | Download | |
| 994 | IS 8422 : Part 1 : 1977 |
Specification for piston rings for IC engines: Part 1 plain compression rings from 30 up to 200 mm nominal diameter R - Rings | 0 | ---- | Download | |
| 995 | IS 8422 : Part 3 : 1977 |
Specification for piston rings for IC engines: Part 3 keystone rings from 82 up to 200 mm nominal diameter T - Rings 15 | 0 | ---- | Download | |
| 996 | IS 8422 : Part 5 : 1977 |
Specification for piston rings for IC engines: Part 5 stepped oil scraper rings from 30 up to 200 mm nominal diameter Z - Rings | 0 | ---- | Download | |
| 997 | IS 8422 : Part 7 : 1977 |
Specification for piston rings for IC engines: Part 7 double bevelled slotted oil control rings from 50 up to 200 mm nominal diameter G - Rings | 0 | ---- | Download | |
| 998 | IS 8434 : 1977 |
Air - Conditioning requirements on board ships | 0 | ---- | Download | |
| 999 | IS 8450 : 2009/ISO 9519: 1990 (1 Revision) |
Shipbuilding and marine structures - Rungs for dog - Step ladders (First Revision) | 0 | ---- | Buy | |
| 1000 | IS 8470 : 2018/ISO 3394 : 2012 (1 Revision) |
Packaging - Complete, Filled Transport Packages and Unit Loads - Dimensions of Rigid Rectangular Packages (Second Revision) | 0 | ---- | Buy | |
| 1001 | IS 8503 : 1986 (1 Revision) |
Technical supply conditions for aluminium alloy pistons for internal combustion engines (First Revision) | 0 | ---- | Download | |
| 1002 | IS 8509 : Part 1 : 1977 |
Code of practice for tests and trials of dredgers: Part 1 self - Propelled trai - Ling hopper suction dredgers | 0 | ---- | Download | |
| 1003 | IS 8521 : Part 2 : 2022/ISO 10789: 2011 (1 Revision) |
Eye and face protection for occupational use : Part 2 Additional requirements for mesh protectors (First Revision) | 0 | ---- | Buy | |
| 1004 | IS/ISO 8528 : Part 7 : 2017/ISO 8528-7:2017 (1 Revision) |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 7 Technical Declarations for Specification and Design ( First Revision ) | 0 | ---- | Buy | |
| 1005 | IS/ISO 8528 : Part 9 : 2017/ISO 8528-9:2017 (1 Revision) |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 9 Measurement and Evaluation of Mechanical Vibrations ( First Revision ) | 0 | ---- | Buy | |
| 1006 | IS/ISO 8528 : Part 4 : 2005/ISO 8528-4:2005 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 4 controlgear and switchgear | 0 | ---- | Buy | |
| 1007 | IS/ISO 8528 : Part 8 : 2016/Identical to ISO 852 (1 Revision) |
Reciprocating internal combustion engine driven alternating current generating sets: Part 8 requirements and tests for low - Power generating sets (First Revision) | 0 | ---- | Buy | |
| 1008 | IS/ISO 8528 : Part 1 : 2018/ISO 8528-1:2018 (1 Revision) |
Reciprocating Internal Combustion Engine Driven Alternating Current Generating Sets Part 1 Application, Ratings and Performance ( First Revision ) | 0 | ---- | Buy | |
| 1009 | IS/ISO 8528 : Part 6 : 2005/ISO 8528-6:2005 |
Reciprocating internal combustion engine driven alternating current generating sets: Part 6 test methods | 0 | ---- | Buy | |
| 1010 | IS 8589 : 2011/ISO 4170 : 1995 (2 Revision) |
Air cargo equipment - Interline pallet nets (Second Revision) | 0 | ---- | Buy | |
| 1011 | IS/ISO 8601 : Part 2 : 2019/ISO 12614-15:2021 |
Date and Time Representations For Information Interchange Part 2: Extensions | 0 | ---- | Buy | |
| 1012 | IS 8649 : Part 1 : 1977 |
Procedure for designing air conditioning system on board ships: Part 1 heat load calculation | 0 | ---- | Download | |
| 1013 | IS 8650 : 2015/ISO 3828:2008 (2 Revision) |
Shipbuilding and marine structures - Deck machinery - Vocabulary and symbols (Second Revision) | 0 | ---- | Buy | |
| 1014 | IS 8705 : 1978 |
Specification for static invertors for aircrafts | 0 | ---- | Download | |
| 1015 | IS 8706 : 1978 |
Safety features for alternating current ground power units for aircraft - Servicing | 0 | ---- | Download | |
| 1016 | IS 8712 : Part 1 : 1978/ISO 3827-1: 1977 |
Guidelines for co - Ordination of dimensions in shipbuilding: Part 1 principles of dimensional co - Ordination | 0 | ---- | Buy | |
| 1017 | IS 8712 : Part 3 : 1978 |
Guidelines for Co - ordination of dimensions in shipbuilding: Part 3 coordinating sizes for components and assemblies | 0 | ---- | Download | |
| 1018 | IS 8712 : Part 5 : 1985 |
Guidelines fur co-ordination of blhd - guidelines for co-ordination of eimensions in shipbuilding: Part 5 coordinating spaces for internal subdivisions in shipbuilding: Part 5 co - ordinating space & for internal subdivision | 0 | ---- | Download | |
| 1019 | IS 8712 : Part 7 : 1985 |
Guidelines for co-ordination of dimensions in shipbuilding: Part 7 coordinating sizes for fixtures, fittings and equipment | 0 | ---- | Download | |
| 1020 | IS 8712 : Part 2 : 1978 |
Guidelines for co-ordination of dimensions in shipbuilding: Part 2 glossary of terms | 0 | ---- | Download | |
| 1021 | IS 8712 : Part 4 : 1977 |
Guidelines for co-ordination of dimensions in shipbuilding: Part 4 controlling dimensions | 0 | ---- | Download | |
| 1022 | IS 8712 : Part 6 : 1985 |
Guidelines for co - ordination of dimension in shipbuilding: Part 6 coordinating spaces for furniture | 0 | ---- | Download | |
| 1023 | IS 8712 : Part 8 : 1985 |
Guidelines for co-ordination of dimensions in shipbuilding: Part 8 coordinating sizes for services | 0 | ---- | Download | |
| 1024 | IS 8715 : 1978 |
Code of practice for packaging of bicycles for export | 0 | ---- | Download | |
| 1025 | IS 8717 : 1978 |
Code of practice for packaging of cast iron pipes and fittings of 150 mm diameter and below | 0 | ---- | Download | |
| 1026 | IS 8752 : 1978 |
Specification for towing hook for use between trailers of up to 5 tonnes gross mass and transport tractor | 0 | ---- | Download | |
| 1027 | IS 8762 : 1978 |
General requirements and testing of certified lower - Deck half - Size containers for high capacity aircraft | 0 | ---- | Download | |
| 1028 | IS 8790 : Part 2 : 1978 |
General requirements of powered industrial trucks working in hazardous areas: Part 2 electric - Battery - Powered industrial trucks | 0 | ---- | Download | |
| 1029 | IS 8790 : Part 1 : 1978 |
General requirements of powered industrial trucks working in hazardous areas: Part 1 internal combustion engine powered trucks | 0 | ---- | Download | |
| 1030 | IS/ISO/IEC/IEEE 8802 : Part 1X : 2013/ISO 20854 : 2019 |
Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks Part 1X: Port-based Network Access Control | 0 | ---- | Buy | |
| 1031 | IS 8809 : 1991/ISO 2902: 1990 (1 Revision) |
Shipbuilding - Gaskets for Ship's Windows | 0 | ---- | Buy | |
| 1032 | IS 8834 : 1978 |
Dimensions for general purpose push - Pull three - Pole circuit - Breakers for aircraft | 0 | ---- | Download | |
| 1033 | IS 8852 : 1978 |
Dimensions for general purpose push - Pull single - Pole circuitbreakers for aircraft | 0 | ---- | Download | |
| 1034 | IS 8886 : Part 3 : 1979/ISO 5779: 1987 |
Ship's Ordinary Rectangular Windows - Part III : Positioning | 0 | ---- | Buy | |
| 1035 | IS 8886 : Part 1 : 2012 (1 Revision) |
Ships Ordinary Rectangular Windows - Specification - Part 1 Classification, Dimensions, Materials, Marking and Designation | 0 | ---- | Download | |
| 1036 | IS 8924 : 1978 |
Specification for bushes for leaf spring assemblies for automotive suspension | 0 | ---- | Download | |
| 1037 | IS 8925 : 2015/ISO 8854:2012 (1 Revision) |
Road vehicles - Alternators with regulators - Test methods and general requirements (First Revision) | 0 | ---- | Buy | |
| 1038 | IS 8946 : 1978 |
General requirements for rotating electrical machinery for aircraft | 0 | ---- | Download | |
| 1039 | IS 8981 : 1978 |
Specification for extra low voltage and low voltage spring return non - Latch switches for aircraft | 0 | ---- | Download | |
| 1040 | IS 8993 : 2004/ISO 6555:1998 (1 Revision) |
Shipbuilding - Topping (First Revision) | 0 | ---- | Buy | |
| 1041 | IS 9018 : Part 1 : 2022/ISO/TS 22239-3 : 2017 (1 Revision) |
Piezoelectric dielectric and electrostatic oscillators of assessed quality Part 1: Generic specification | 0 | ---- | Buy | |
| 1042 | IS 9057 : 1998 (2 Revision) |
Automotive vehicles - Exhaust emissions - Carbon monoxide concentration at idling for vehicles equipped with spark ignition engines - Method of measurement (Second Revision) | 0 | ---- | Download | |
| 1043 | IS 9067 : 2012/ISO 15516:2006 (2 Revision) |
Ships and marine technology - Launching appliances for davit - Launched lifeboats (Second Revision) | 0 | ---- | Buy | |
| 1044 | IS 9086 : 2003 (1 Revision) |
Aerospace - Universal head aluminium alloy rivets - Specification (First Revision) | 0 | ---- | Buy | |
| 1045 | IS 9087 : 2000 (1 Revision) |
Aircraft - 100° countersunk aluminium alloy rivets - Specification (First Revision) | 1 | ---- | Download | |
| 1046 | IS 9088 : 1979 |
Specification for universal head nickel alloy rivets for aircraft | 0 | ---- | Download | |
| 1047 | IS 9089 : 2004 (2 Revision) |
Aircraft - Aluminium and wrought aluminium alloy rivets - General requirements (Second Revision) | 0 | ---- | Download | |
| 1048 | IS 9093 : 1979 |
Specification for 100 degree countersunk nickel alloy rivets for aircraft | 0 | ---- | Download | |
| 1049 | IS 9111 : 1979 |
Glossary of terms and classification pertaining to transport packaging | 0 | ---- | Download | |
| 1050 | IS 9114 : 1979 |
General requirements for insulation in air - Conditioned spaces on board ships | 0 | ---- | Download | |
| 1051 | IS 9126 : Part 3 : 1979 |
Tolerances for Castings and Finishing of Ships Screw Propellers - Part III : Methods of Measurement | 0 | ---- | Download | |
| 1052 | IS 9126 : Part 1 : 1979/ISO 484-1: 1981 |
Tolerances for castings and finishing for ships' screw propellers, Part 1 Propellers of diameters between 0.8 and 2.5 metres | 0 | ---- | Buy | |
| 1053 | IS 9126 : Part 2 : 1979/ISO 484-1: 1981 |
Tolerances for castings and finishing for ships' screw propellers, Part 2 Propellers of diameters graeater than 2.5 metres | 0 | ---- | Buy | |
| 1054 | IS 9156 : 1979 |
Specification for dc generators for aircraft | 0 | ---- | Download | |
| 1055 | IS 9168 : 2018 (2 Revision) |
Automotive vehicle - All rubber flaps for pneumatic tyres - Specification -Amendment - 2 | 2 | ---- | Download | |
| 1056 | IS 9174 : 1979 |
Dimensions for single - Hole mounted lever - Operated switches for aircraft | 0 | ---- | Download | |
| 1057 | IS/ISO 9177 : PART 3 : 2022/ISO 21984:2018 (1 Revision) |
Mechanical pencils for technical drawings Part 3: Black leads Bending strengths of HB leads | 0 | ---- | Buy | |
| 1058 | IS 9196 : 1979 |
Specification for rotary and linear actuators (AC and DC) for aircraft | 0 | ---- | Download | |
| 1059 | IS 9204 : 1979 |
Marking of servicing, maint - Enance, ground handling and safety/hazard points on aircraft | 0 | ---- | Download | |
| 1060 | IS 9208 : 1979 |
Guide for palletization of mica for export | 0 | ---- | Download | |
| 1061 | IS 9211 : 2003 (2 Revision) |
Terms and definitions of weights of road vehicles other than 2 and 3 wheelers (Second Revision) | 1 | ---- | Download | |
| 1062 | IS 9228 : 2019 (1 Revision) |
Chairs for chairlifts - Specification (First Revision) | 1 | ---- | Download | |
| 1063 | IS 9238 : 1979 |
Lateral spacing of foot controls for passenger cars | 0 | ---- | Buy | |
| 1064 | IS 9262 : 1979 |
Recommendations for gear positions for road vehicles | 0 | ---- | Download | |
| 1065 | IS 9264 : Part 1 : 1979 |
Specification for interior lighting of motor vehicle: Part 1 general requirements and recommendations | 0 | ---- | Download | |
| 1066 | IS 9290 : 1979 |
Specification for aircraft fuel servicing vehicles | 0 | ---- | Download | |
| 1067 | IS 9317 : 2022 (2 Revision) |
SKIS VOCABULARY | 0 | ---- | Download | |
| 1068 | IS 9418 : 1980 |
Dimensions for mounting flanges for in - Line fuel injection pumps for multi - Cylinder compressiom ignition engines | 0 | ---- | Download | |
| 1069 | IS 9420 : Part 1 : 1988 (1 Revision) |
Specification for feed pumps for diesel fuel injection equipment: Part 1 external dimensions(First Revision) | 0 | ---- | Download | |
| 1070 | IS 9420 : Part 2 : 1988 |
Specification for feed pumps for diesel fuel injection equipment: Part 2 types of drives | 0 | ---- | Download | |
| 1071 | IS 9421 : 1980 |
Colours of indicator lights for shipboard use | 0 | ---- | Download | |
| 1072 | IS 9422 : 1989 (1 Revision) |
Symbols for ships' bulbous bow and side thruster | 0 | ---- | Download | |
| 1073 | IS 9423 : 1980 |
Identification colours for schemes for ships' ventilation systems | 0 | ---- | Download | |
| 1074 | IS 9426 : 2023/ISO 17666: 2016 (1 Revision) |
Guidelines for procurement of hides and skins | 0 | ---- | Buy | |
| 1075 | IS 9432 : 1980 |
Specification for ignition switches for automobiles | 2 | ---- | Download | |
| 1076 | IS 9433 : 1980 |
Specification for piano key type switches for use in automobiles | 1 | ---- | Download | |
| 1077 | IS 9435 : 2004/ISO 612 (E) (1 Revision) |
Terms and Definitions Relating to Dimensions of Road Vehicles Other than 2 and 3 Wheelers | 1 | ---- | Buy | |
| 1078 | IS 9436 : 2018 (1 Revision) |
Performance requirements and methodsof test for wheels for passenger cars, quadricycles and mini goods cariers (First Revision) | 2 | ---- | Download | |
| 1079 | IS 9438 : 2018 (1 Revision) |
Performance requirements and methods of tests for wheels/ rims for trucks and buses (First Revision) | 2 | ---- | Download | |
| 1080 | IS 9447 : 2023/ISO 11231: 2019 (1 Revision) |
Assessment of Seepage Losses in Canals by Analytical method- Guidelines ( first revision) | 0 | ---- | Buy | |
| 1081 | IS 9448 : Part 2 : 1980 |
Specification for marine guardrails and stanchions: Part 2 gates and portable guardrail sections for ships | 0 | ---- | Download | |
| 1082 | IS 9448 : Part 1 : 1980 |
Specification for marine guardrails and stanchions: Part 1 guardrails for ships | 1 | ---- | Download | |
| 1083 | IS 9448 : Part 3 : 1980 |
Specification for marine guardrails and stanchions: Part 3 storm rails (Exterior) | 0 | ---- | Download | |
| 1084 | IS 9453 : 2014 (2 Revision) |
Valve caps for tyre tube valves for automotive vehicles - Specification (Second Revision) | 0 | ---- | Download | |
| 1085 | IS 9465 : 1980 |
Mounting dimensions for in - Line injection pump assemblies for fuel injection equipment for multi - Cylinder compression ignition engines | 1 | ---- | Download | |
| 1086 | IS 9484 : 1980 |
Specification for centre bolts for leaf springs | 1 | ---- | Download | |
| 1087 | IS 9500 : 2017 |
360 degree rotary emergency warning lights/special warning lamps - Specification (First Revision) Amendment - 1 | 1 | ---- | Download | |
| 1088 | IS 9521 : 1980 |
Specification for push - Button type switches for automotive vehicles | 0 | ---- | Download | |
| 1089 | IS 9574 : 2004 (2 Revision) |
Leaf springs assembly clips - Specification (Second Revision) | 0 | ---- | Download | |
| 1090 | IS 960 : 2005 (2 Revision) |
Bicycle rim tapes and buckles - Specification (Second Revision) | 1 | ---- | Download | |
| 1091 | IS 9624 : 1980 |
Design criteria for aircraft passenger seats and berths | 0 | ---- | Download | |
| 1092 | IS 9643 : 1980 |
Specification for non - Skid type chain assembly for tyres - Single type | 0 | ---- | Download | |
| 1093 | IS 9662 : Part 1 : 2023/ISO 21349: 2023 (1 Revision) |
Code of practice for construction and assembly of leather sealing cups Part I U cups First Revision | 0 | ---- | Buy | |
| 1094 | IS/ISO 9666 : 1993/IS0 9666 : 1993 |
Aircraft - Self - Propelled lavatory servicing vehicle - Functional requirements | 0 | ---- | Buy | |
| 1095 | IS 9671 : 1980 |
Specification for frequency weighting for the measurement of aircraft noise (D - Weighting) | 0 | ---- | Download | |
| 1096 | IS/ISO 9678 : 1991/ISO 9678 : 1991 |
Aircraft - Self - Propelled potable - Water vehicle - Functional requirements | 0 | ---- | Buy | |
| 1097 | IS 9701 : 2019 (2 Revision) |
Powered industrial trucks and tractors - Brake performance and component strength (Second Revision) | 0 | ---- | Buy | |
| 1098 | IS 9732 : 1981 |
Method for recording information for distribution trials for complete, filled transport packages | 0 | ---- | Download | |
| 1099 | IS 9734 : 1981 |
Guidelines for tests and trials of shipboard air - Conditioning systems | 0 | ---- | Download | |
| 1100 | IS 9752 : 1981/ISO 538: 1967 |
Conventional signs for the installation of ships' ventilation and pipeline systems | 0 | ---- | Buy | |
| 1101 | IS 9796 : 1981 |
Specification for non - Weathertight steel doors | 0 | ---- | Download | |
| 1102 | IS 9801 : 1981 |
Specification for laminated springs for railway rolling stock | 0 | ---- | Download | |
| 1103 | IS 9837 : 1981 |
Code for testing of marine centrifugal oil purifiers | 0 | ---- | Download | |
| 1104 | IS 9852 : 1981 |
General requirements and testing of capstans | 0 | ---- | Download | |
| 1105 | IS 9860 : Part 1 : 1981 |
Specification for fishing hooks: Part 1 barbed hooks | 0 | ---- | Download | |
| 1106 | IS 9871 : 1993 (1 Revision) |
Inland vessels - Wooden hatch covers - Specification (First Revision) | 0 | ---- | Download | |
| 1107 | IS 9881 : 2007 (1 Revision) |
Container spreaders - Specification (First Revision) | 0 | ---- | Download | |
| 1108 | IS 9882 : Part 1 : 1981/ISO 4089:1979 |
Specification for sealing rubber for covers for cargo hatches: Part 1 dry cargo hatches | 0 | ---- | Buy | |
| 1109 | IS 9895 : 2004 (1 Revision) |
Road vehicles - Connectors for the electrical connection of towing and towed vehicles - Definitions, tests and requirements (First Revision) | 0 | ---- | Download | |
| 1110 | IS 9905 : 1981 |
Specification for pneumatic coupling between tractors and trailers | 0 | ---- | Buy | |
| 1111 | IS 9942 : 1981 |
Specification for t - Sign plate for trailers | 1 | ---- | Download | |
| 1112 | IS/ISO 9943 : 2009/ISO 9943: 2009 |
Shipbuilding - Ventilation and air - Treatment of galleys and pantries with cooking appliances | 0 | ---- | Buy | |
| 1113 | IS H10001 : 1981 |
Specification for performance requirements for constant speed compression ignition (Diesel) engines for general purposes (Up To 20 Kw) | 5 | ---- | Buy |