( Group : Gases, Gas Cylinders , Machine tools and other mechanical products )
Total Standards : 2823
Revised Standards
New Standards
| S.No | IS Number | IS Title | Amendment | Reaffirmation Year | Document | Action |
|---|---|---|---|---|---|---|
| 1 | IS 10022 : 1981 |
Specification for open ended cogged V - Belting | 0 | Feb, 2021 | Download | |
| 2 | IS 1004 : 1980 (1 Revision) |
Specification for valve grinding compound (First Revision) | 1 | Sep, 2024 | Download | |
| 3 | IS 10046 : 1981 |
Specification for dog spikes for mine haulage tracks | 0 | Nov, 2018 | Download | |
| 4 | IS/ISO 10055 : 1996/ISO 10055 : 1996 |
Mechanical vibration - Vibration testing requirements for shipboard equipment and machinery components | 0 | Sep, 2022 | Buy | |
| 5 | IS 10068 : Part 1 : 2018 (1 Revision) |
Press Working Die Sets (Plain Type) — Specification Part 1 Centre Post Rectangular Die Sets ( First Revision ) | 0 | ---- | Download | |
| 6 | IS 10068 : Part 2 : 2018 (1 Revision) |
Press working die sets (Plain Type) - Specification: Part 2 centre post square die sets (First Revision) | 0 | Aug, 2024 | Download | |
| 7 | IS 10068 : Part 3 : 1990 |
Press working die sets - Plain type - Specification: Part 3 centre post round die sets | 0 | Apr, 2022 | Download | |
| 8 | IS 10068 : Part 4 : 1997 |
Press working die sets (Plain Type): Part 4 rear post rectangular die sets - Specification | 0 | Apr, 2022 | Download | |
| 9 | IS 10068 : Part 5 : 1996 |
Press working die sets (Plain Type): Part 5 rear post square die sets - Specification | 0 | Apr, 2022 | Download | |
| 10 | IS 10068 : Part 6 : 1996 |
Press working die sets (Plain Type): Part 6 rear post round die sets - Specification | 0 | Apr, 2022 | Download | |
| 11 | IS 10081 : 1981 |
Terms relating to commercial explosives, pyrotechnics and blasting practices | 0 | Apr, 2021 | Download | |
| 12 | IS 10086 : 2021/ISO 3765:1998 (1 Revision) |
Moulds for Use in Tests of Cement, Concrete and Pozzolana (First Revision) | 1 | ---- | Buy | |
| 13 | IS 10102 : 1982 |
Technical supply conditions for rivets | 1 | Feb, 2021 | Download | |
| 14 | IS 10103 : 1982 |
Method of test for ferrule type couplings used in oil - Hydraulic systems | 3 | Dec, 2024 | Download | |
| 15 | IS 10126 : 1986 (1 Revision) |
Specification for sparklers (First Revision) | 1 | Apr, 2021 | Download | |
| 16 | IS 10129 : 2004/ISO 3019-2:2001 (2 Revision) |
Hydraulic fluid power - Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors (Second Revision) | 0 | Dec, 2024 | Buy | |
| 17 | IS 10131 : 1992 (1 Revision) |
Link chain ends and chain bows for bucket elevators - Specification (First Revision) | 1 | Jan, 2025 | Download | |
| 18 | IS 10140 : 1982 |
Specification for bandsaw blades for woodworking | 1 | Aug, 2024 | Download | |
| 19 | IS 10143 : 1995/ISO 6431 : 1992 (1 Revision) |
Pneumatic fluid power - Single rod cylinders, 1000 kPa (10 Bmar) series, with detachable mountings, bores from 32 mm to 320 mm - Mounting dimensions (First Revision) | 0 | Dec, 2024 | Buy | |
| 20 | IS 10178 : 1995 (1 Revision) |
Co2 gas shielded metal - Arc welding of structural steels - Recommendations (First Revision) | 0 | Feb, 2024 | Download | |
| 21 | IS 10186 : 2015 (1 Revision) |
Recommendations for manual tungsten insert gas arc welding of copper and copper alloys (First Revision) | 0 | Mar, 2025 | Download | |
| 22 | IS 10187 : 2013/ISO 4401 : 2005 (2 Revision) |
Hydraulic fluid power - Four - Port directional control valves - Mounting surfaces (Second Revision) | 0 | Dec, 2024 | Buy | |
| 23 | IS 10188 : 1982/ISO 2934 |
Dimensions for modular units for machine tool construction - Wing bases for columns | 1 | Jan, 2019 | Buy | |
| 24 | IS 10190 : 2018/ISO 1708:1989 (1 Revision) |
Acceptance conditions for general purpose parallel lathes - Testing of the accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 25 | IS 10202 : 1982 |
Specification for scrapers used in mines | 0 | Nov, 2018 | Download | |
| 26 | IS 10203 : 1982 |
Technical supply conditions for thin - Walled plain bearings | 0 | May, 2023 | Download | |
| 27 | IS 10208 : 1982 |
Specification for diamond core drilling equipment | 2 | Jan, 2022 | Download | |
| 28 | IS 10212 : Part 1 : 1986 (1 Revision) |
General requirements of packages for explosives: Part 1 coommercial high explosives (First Revision) | 1 | Apr, 2021 | Download | |
| 29 | IS 10213 : 1982 |
Specification for sandwich belting | 0 | Aug, 2023 | Download | |
| 30 | IS 10216 : 1988/ISO 228-2 : 1987 (1 Revision) |
Pipe threads where pressure - Tight joints are not made on the threads - Verification by means of limit gauges (First Revision) | 0 | Jan, 2020 | Buy | |
| 31 | IS 10229 : 1982 |
Specification for open end V - Belts | 0 | Mar, 2023 | Download | |
| 32 | IS 10234 : 1982 |
Recommendations for general pipeline welding | 1 | Jan, 2019 | Download | |
| 33 | IS 10236 : Part 1 : 1989 |
Procedure for basic climatic and durability tests for optical instruments: Part 1 general | 0 | Mar, 2022 | Download | |
| 34 | IS 10236 : Part 2 : 1982 |
Procedure for climatic and durability tests for optical instruments: Part 2 dry heat test | 0 | Mar, 2022 | Download | |
| 35 | IS 10236 : Part 3 : 1982 |
Procedure for basic climatic and durability tests for optical instruments: Part 3 cold test | 0 | Mar, 2022 | Download | |
| 36 | IS 10236 : Part 4 : 1982 |
Procedure for basic climatic and durability for optical instruments: Part 4 damp heat test | 0 | Mar, 2022 | Download | |
| 37 | IS 10236 : Part 5 : 1982 |
Procedure for basic climatic and durability tests for optical instruments: Part 5 damp heat (Cyclic) test | 0 | Mar, 2022 | Download | |
| 38 | IS 10236 : Part 6 : 1982 |
Procedure for basic climatic and durability tests for optical instruments: Part 6 salt mist test | 0 | Mar, 2022 | Download | |
| 39 | IS 10236 : Part 7 : 1983 |
Procedure for basic climatic and durability tests for optical instruments .: Part 7 mould growth test | 0 | Mar, 2022 | Download | |
| 40 | IS 10236 : Part 8 : 1983 |
Procedure for basic climatic and durability tests for optical instruments: Part 8 thermal shock (Rapid Change Of Temperature) test | 0 | Mar, 2022 | Download | |
| 41 | IS 10236 : Part 9 : 1983 |
Procedure for basic climatic and durability tests for. optical instruments: Part 9 low air pressure (Altitude) test | 0 | Mar, 2022 | Download | |
| 42 | IS 10236 : Part 10 : 1985 |
Procedure for basic climatic and durability tests for optical instruments: Part 10 bump test | 0 | Mar, 2022 | Download | |
| 43 | IS 10236 : Part 11 : 1985 |
Procedure for basic climatic and durability tests for optical instruments: Part 11 vibration test | 0 | Mar, 2022 | Download | |
| 44 | IS 10236 : Part 12 : 1985 |
Procedure for basic climatic and durability tests for optical instruments: Part 12 shock test | 0 | Mar, 2022 | Download | |
| 45 | IS 10236 : Part 13 : 1986 |
Procedure for basic climatic and durability tests for optical instruments: Part 13 dust test | 0 | Mar, 2022 | Download | |
| 46 | IS 10236 : Part 14 : 1986 |
Procedure for basic climatic and durability tests for optical instruments: Part 14 driving rain test | 0 | Mar, 2022 | Download | |
| 47 | IS 10236 : Part 15 : 1986 |
Procedure for basic climatic and durability tests for optical instruments: Part 15 drop test | 0 | Mar, 2019 | Download | |
| 48 | IS 10236 : Part 16 : 1988 |
Procedure for basic climatic and durability tests for optical instruments part 16 solar radiation test | 0 | Feb, 2025 | Download | |
| 49 | IS 10236 : Part 17 : 1988 |
Procedure for basic climatic and durability tests for optical instruments: Part 17 acceleration (Steady - State) test | 0 | Mar, 2019 | Download | |
| 50 | IS 10236 : Part 18 : 1988 |
Procedure for basic climatic and durability tests for optical instruments: Part 18 sealing test | 0 | Mar, 2019 | Download | |
| 51 | IS 1024 : 1999 (2 Revision) |
Use of welding in bridges and structures subject to dynamic loading - Code of practice (Second Revision) | 0 | Jan, 2024 | Download | |
| 52 | IS 10255 : 1982 |
Specification for tapered die-sinking cutters with parallel shanks | 0 | Aug, 2024 | Download | |
| 53 | IS 10260 : Part 1 : 2017/ISO 4378-1 (1 Revision) |
Plain bearings - Terms, definitions, classification and symbols: Part 1 design, bearing materials and their properties (First Revision) | 0 | Nov, 2021 | Buy | |
| 54 | IS/ISO 10262 : 1998/ISO 10262 : 1998 |
Earth moving machinery - Hydraulic excavators - Laboratory tests and performance requirements for operator protective guards | 0 | Mar, 2022 | Buy | |
| 55 | IS/ISO 10263 : Part 2 : 2009/ISO 10263 : Part 2 : 2009 |
Earth - Moving machinery - Operator enclosure environment: Part 2 air filter element test method | 0 | Mar, 2022 | Buy | |
| 56 | IS/ISO 10263 : Part 3 : 2009/ISO 10263 : Part 3 : 2009 |
Earth - Moving machinery - Operator enclosure environment: Part 3 pressurization test method | 0 | Mar, 2022 | Buy | |
| 57 | IS/ISO 10263 : Part 4 : 2009/ISO 10263-4:2009 |
Earth - Moving machinery - Operator enclosure environment: Part 4 heating, ventilating and air conditioning (HVAC) test method and performance | 0 | ---- | Buy | |
| 58 | IS/ISO 10264 : 1990/ISO 10264:1990 |
Earth-Moving Machinery - Key-Locked Starting Systems | 0 | Nov, 2022 | Buy | |
| 59 | IS/ISO 10265 : 2008/ISO 10265 : 2008 |
Earth - Moving machinery - Crawler machines - Performance requirements and test procedures for braking systems | 0 | Mar, 2022 | Buy | |
| 60 | IS 10275 : 1982 |
Methods For Assessment of circularity Error From Polar Graphs Obtained By Using Stylus-Type Form-Measuring Instrument | 0 | Mar, 2022 | Download | |
| 61 | IS 10288 : 1982 |
Specification for belt - Fasteners, plate type | 1 | Jul, 2024 | Download | |
| 62 | IS 10293 : 1982 |
Dimensions for optional recess on morse taper shanks for tools | 0 | Aug, 2024 | Download | |
| 63 | IS 10303 : 1993/ISO 6749:1984 (1 Revision) |
Earth moving machinery - Preservation and storage (First Revision) | 0 | Dec, 2022 | Buy | |
| 64 | IS/ISO 10326 : Part 1 : 2016/ISO 10326 : Part 1 : 2016 |
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration: Part 1 basic requirements | 0 | Feb, 2021 | Buy | |
| 65 | IS 10352 : 2017/ISO 2407:1997 (2 Revision) |
Test conditions for internal cylindrical grinding machines with horizontal spindle - Testing of accuracy (Second Revision) | 0 | Mar, 2022 | Buy | |
| 66 | IS 10361 : 1983 |
Classification of wrist watch cases | 0 | Jul, 2019 | Download | |
| 67 | IS 10362 : 1982 |
Dimensions for threads for back cover and bezel for watch cases | 0 | Mar, 2024 | Download | |
| 68 | IS 10363 : 1982 |
Dimensions for fixing devices for threaded back covers for watch cases | 0 | Mar, 2024 | Download | |
| 69 | IS 10364 : 2001 (1 Revision) |
Snap type back covers and bezel for watch cases -- Dimensions (First Revision) | 0 | Mar, 2024 | Download | |
| 70 | IS 10365 : 1982 |
Dimensions for packing ring and housing for back cover joint for watch cases | 0 | Mar, 2024 | Download | |
| 71 | IS 10366 : 1995 (1 Revision) |
Watch cases -- Crystal and dial opening diameters -- Dimensions (First Revision) | 0 | Jul, 2019 | Download | |
| 72 | IS 10367 : 1983 |
Dimensions for crystal and dial openings (shaped or circular) for watch cases | 0 | Jul, 2019 | Download | |
| 73 | IS 10368 : 1983 |
Dimensions for movement holders for watch cases | 0 | Mar, 2024 | Download | |
| 74 | IS 10372 : 1982 |
Specification for lock - Grip pliers | 0 | Jan, 2025 | Download | |
| 75 | IS 10373 : 1982 |
Specification for plastic boxes for safety matches | 0 | Apr, 2021 | Download | |
| 76 | IS 10375 : 1982 |
Specification for poker | 1 | Mar, 2021 | Download | |
| 77 | IS 10410 : 1983 |
Specification for lock nuts for bulk head coupling assembly for oil - Hydraulic systems | 1 | Sep, 2024 | Download | |
| 78 | IS 10411 : 2020/ISO 4393 : 2015 (1 Revision) |
Fluid Power Systems and Components — Cylinders — Basic Series of Piston Strokes ( First Revision ) | 0 | Dec, 2024 | Buy | |
| 79 | IS 10412 : 1983 |
System of designation and marking of single point cutting tools with carbide tips | 1 | Aug, 2024 | Download | |
| 80 | IS 10416 : 2019/ISO 5598 : 2008 (2 Revision) |
Fluid Power Systems and Components ? Vocabulary ( Second Revision ) | 0 | ---- | Buy | |
| 81 | IS 10417 : 1983 |
Specification for equal cross coupling assembly for oil - Hydraulic systems | 2 | Sep, 2024 | Download | |
| 82 | IS 10433 : Part 2 : 2002 (1 Revision) |
Male stud tee body (Stud Run) for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision) | 0 | Sep, 2024 | Download | |
| 83 | IS 10443 : 2006 (1 Revision) |
Data sheet for selection of marine loading arms (First Revision) | 0 | Mar, 2022 | Download | |
| 84 | IS 10463 : Part 2 : 1985 |
Glossary of terms for bulk handling equipment: Part 2 stacking, loading and reclaiming equipment | 0 | Mar, 2023 | Download | |
| 85 | IS 10463 : Part 6 : 1983 |
Glossary of terms for bulk handling equipment: Part 6 cyclic loose bulk handling equipment (Non - Stationary) | 0 | Mar, 2023 | Download | |
| 86 | IS 10465 : 1983 |
Specification for chain wheel rotary tooth form milling cutter | 1 | Aug, 2024 | Download | |
| 87 | IS 10481 : 2020/ISO 4413 : 2010 (2 Revision) |
Hydraulic Fluid Power — General Rules and Safety Requirements for Systems and their Components ( Second Revision ) | 0 | Dec, 2024 | Buy | |
| 88 | IS 10483 : 1983/ISO/DIS 7806 |
Code For Designating Perforations Of Industrial Plate Sieves (identical With Iso/dis 7806) | 0 | Jun, 2020 | Buy | |
| 89 | IS 10489 : 1983 |
Specification for steel dresser for abrasive wheels | 0 | Apr, 2021 | Download | |
| 90 | IS 10490 : 1983 |
Specification for breech loading shot guns, single and double barrel | 2 | Mar, 2019 | Download | |
| 91 | IS 10491 : 1983 |
Specification for muzzle loading shot guns, single and double barrel | 2 | Mar, 2019 | Download | |
| 92 | IS/ISO 105-G04 : 2016/ISO 11119-2 : 2020 (1 Revision) |
Textiles Tests for colour fastness Part G04 : Colour fastness to nitrogen oxides in the atmosphere at high humidities first revision | 0 | Jun, 2023 | Buy | |
| 93 | IS/ISO 105 : Part X07 : 1994/ISO 5184 : 1979 |
Textiles Tests for colour fastness Part X07: Colour fastness to cross-dyeing: Wool | 0 | ---- | Buy | |
| 94 | IS/ISO 105 : Part S01 : 1993/ISO 21360-2: 2020 |
Textiles — Tests for colour fastness — Part S01: Colour fastness to vulcanization : Hot air | 0 | ---- | Buy | |
| 95 | IS/ISO 105 : Part X09 : 1993/ISO 1089 : 2023 |
Textiles Tests for colour fastness Part X09: Colour fastness to formaldehyde | 0 | ---- | Buy | |
| 96 | IS/ISO 105 : Part X14 : 1994/ISO 5183-2 : 2000 |
Textiles Tests for colour fastness Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate | 0 | ---- | Buy | |
| 97 | IS/ISO 105 : Part D02 : 2016/ISO 8430-2 : 2016 |
Textiles — Tests for Colour Fastness Part D02: Colour Fastness to Rubbing: Organic Solvents | 0 | Jun, 2024 | Buy | |
| 98 | IS 10506 : 1996 (1 Revision) |
Trolley for carrying jute bales - Specification (First Revision) | 0 | Jan, 2025 | Download | |
| 99 | IS 10508 : 2020/16136 (2 Revision) |
Phosphoric Acid, Food Grade - Specification ( Second Revision ) | 0 | Mar, 2025 | Buy | |
| 100 | IS 10514 : 1983 |
Specification for split taper socket for tools with parallel shank and driving tenon | 0 | Aug, 2024 | Download | |
| 101 | IS 10519 : 1983 |
Specification for diamond abrasive circular segmental saws | 0 | Oct, 2020 | Download | |
| 102 | IS 10525 : 2022/ISO 8000-130 : 2016 (1 Revision) |
SPECIFICATION FOR GENERAL PURPOSE DRINKING WATER TROLLEY First Revision of IS 10525 | 0 | ---- | Buy | |
| 103 | IS/ISO 10532 : 1995/ISO 10532 : 1995 |
Earth - Moving machinery - Machine - Mounted retrieval device - Performance equirements | 0 | Mar, 2022 | Buy | |
| 104 | IS/ISO 10533 : 1993/ISO 10533 : 1993 |
Earth - Moving machinery - Lift - Arm support devices | 0 | Mar, 2022 | Buy | |
| 105 | IS 1056 : 2004 (3 Revision) |
COMMERCIAL WEIGHTS — SPECIFICATION (Third Revision) | 0 | Apr, 2021 | Download | |
| 106 | IS/ISO 10567 : 2007/ISO 10567 : 2007 |
Earth - Moving machinery - Hydraulic excavators - Lift capacity | 0 | Mar, 2022 | Buy | |
| 107 | IS 1057 : 2004 (3 Revision) |
Commercial carat weights - Specification (Third Revision) | 0 | Apr, 2021 | Download | |
| 108 | IS/ISO 10570 : 2004/ISO 10570 : 2004 |
Earth - Moving machinery - Articulated frame lock - Performance requirements | 0 | ---- | Buy | |
| 109 | IS 10571 : 1983 |
Specification for split taper sockets for tools with parallel shank, driving square and driving tenon | 0 | Aug, 2024 | Download | |
| 110 | IS 10573 : 1983 |
Specification for oil sight glass for machine tools | 1 | Mar, 2022 | Download | |
| 111 | IS 10574 : 1983 |
Specification for clamp buttons to be used with parallel sided clamp plates | 1 | Mar, 2022 | Download | |
| 112 | IS 10575 : 1983/ISO 3371 |
Dimensions for modular units for machine tool construction - Rotary tables | 0 | Jan, 2019 | Buy | |
| 113 | IS 10576 : 1983/ISO 2769 |
Dimensions for modular units for machine tool construction - Wing bases for slide units | 0 | Jan, 2019 | Buy | |
| 114 | IS 1058 : 1993 (2 Revision) |
Legal metrology - Commercial capacity measures - Specification (Second Revision) | 0 | Apr, 2024 | Download | |
| 115 | IS 10587 : 1983 |
Terminology for screw threads | 0 | Feb, 2021 | Download | |
| 116 | IS 1059 : 1994 (1 Revision) |
Legal metrology - Commercial length measures (Non - Flexible) - Specification (First Revision) | 0 | Apr, 2024 | Download | |
| 117 | IS 10591 : 1983 |
Specification for segmental saws for cold sawing | 1 | Aug, 2024 | Download | |
| 118 | IS 10602 : 1983 |
Specification for floor plates | 1 | Mar, 2022 | Download | |
| 119 | IS 10605 : 1989 (1 Revision) |
Steel globe valves (Flanged And Butt Welded Ends) for petroleum, petrochemical and allied industries - Specification (First Revision) | 0 | Jul, 2020 | Download | |
| 120 | IS 10608 : 1998 (1 Revision) |
Spline hobs -- Straight sided specification (first revision) | 0 | Aug, 2024 | Download | |
| 121 | IS 10612 : 1983 |
Specification for 4 - Jaw independent lathe chucks | 0 | Mar, 2022 | Download | |
| 122 | IS 10644 : 1983 |
Recommendation on preferred shut heights for mechanical presses | 1 | Mar, 2021 | Download | |
| 123 | IS 10648 : 1983 |
Code for identification of ring type needle bearings Including Sealed Bearings | 0 | Jun, 2020 | Download | |
| 124 | IS 10649 : 1983 |
Specification for ring gauges for drill chuck taper arbors of morse taper and jacob taper type | 0 | Feb, 2019 | Download | |
| 125 | IS 10650 : 1983 |
Specification for pressure pins | 1 | Mar, 2021 | Download | |
| 126 | IS 10678 : 1983 |
Data sheet for design and selection of vacuum producer | 0 | Mar, 2023 | Download | |
| 127 | IS 10679 : 1983 |
Specificati - On for photoelectric spectrophotometer (Single Beam Type) | 0 | Mar, 2019 | Download | |
| 128 | IS 10685 : 1983 |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range Above M120 up to and including M200) | 0 | Feb, 2019 | Download | |
| 129 | IS 10686 : 1983 |
Specification for mechanical multi - Disc clutches (Wet Type) | 0 | May, 2024 | Download | |
| 130 | IS 10689 : 1993/ISO 2860 : 1992 (1 Revision) |
Earth moving machinery - Minimum access dimensions (First Revision) | 0 | Jan, 2025 | Buy | |
| 131 | IS 10695 : 1983 |
Specification for pocket stereoscope | 0 | Mar, 2019 | Download | |
| 132 | IS 10711 : 2001/ISO 5457 : 1999 (1 Revision) |
Technical product documentation -- Sizes and layout of drawing sheets (First Revision) | 1 | Mar, 2023 | Buy | |
| 133 | IS 10712 : 2018/ISO 6433 : 2012 (1 Revision) |
Technical product documentation -- Part references (First Revision) | 0 | Aug, 2023 | Buy | |
| 134 | IS 10713 : 1983/ISO 5455 : 1979 |
Scales for use on technical drawings (ISO Title : Technical Drawings -- Scales) | 0 | Feb, 2021 | Buy | |
| 135 | IS 10714 : Part 15 : 2019/ISO 128-71:2010 |
Technical Product Documentation (TPD) -- General principles of presentation: Part 15 Presentation of shipbuilding drawings | 0 | Aug, 2023 | Buy | |
| 136 | IS 10714 : Part 71 : 2019/ISO 128-15:2013 |
Technical product documentation (TPD) -- General principles of presentation: Part 71 Simplified representation for mechanical engineering drawings | 0 | Aug, 2023 | Buy | |
| 137 | IS 10715 : Part 1 : 1999/ISO 6410-1 : 1993 (1 Revision) |
Technical drawings -- Screw threads and threaded parts: Part 1 General conventions (First Revision) | 0 | Feb, 2021 | Buy | |
| 138 | IS 10715 : Part 2 : 1999/ISO 6410-2 : 1993 (1 Revision) |
Technical drawings -- Screw threads and threaded parts: Part 2 Screw thread inserts | 0 | Feb, 2021 | Buy | |
| 139 | IS 10716 : Part 1 : 1999/ISO 2162-1 : 1993 (1 Revision) |
Technical product documentation -- Springs: Part 1 Simplified representation (First Revision) | 0 | Mar, 2022 | Buy | |
| 140 | IS 10716 : Part 2 : 1999/ISO 2162-2 : 1993 |
Technical product documentation -- Springs: Part 2 Presentation of data for cylindrical helical compression springs | 0 | Mar, 2022 | Buy | |
| 141 | IS 10716 : Part 3 : 2015/ISO 26909 : 2009 (1 Revision) |
Technical product documentation -- Springs: Part 3 Vocabulary (First Revision) | 0 | Mar, 2022 | Buy | |
| 142 | IS 10717 : 1983/ISO 2203 : 1973 |
Conventional representation of gears on technical drawings (ISO Title : Technical drawings -- Conventional Representation of Gears) | 0 | Feb, 2021 | Buy | |
| 143 | IS 10720 : 1999/ISO 5261 : 1995 (1 Revision) |
Technical drawings -- Simplified representation of bars and profile sections (First Revision) | 0 | Mar, 2022 | Buy | |
| 144 | IS 10722 : Part 1 : 1983/ISO 3952-1 : 1981 |
Graphical symbols for elements of kinematic diagrams: Part 1 | 0 | Feb, 2021 | Buy | |
| 145 | IS 10722 : Part 2 : 1983/ISO 3952-2 : 1981 |
Graphical symbols for elements of kinematic diagrams: Part 2 | 0 | Feb, 2021 | Buy | |
| 146 | IS 10722 : Part 3 : 1983/ISO 3952-3 : 1979 |
Graphical symbols for kinematic diagrams: Part 3 | 0 | Feb, 2021 | Buy | |
| 147 | IS 10722 : Part 4 : 1985/ISO 3952-4 : 1984 |
Graphical symbols for elements of kinematic diagrams: Part 4 | 0 | Mar, 2022 | Buy | |
| 148 | IS 10731 : 2000 (1 Revision) |
Presses - Slide holes for locating the shanks - Dimensions (First Revision) | 0 | Mar, 2021 | Download | |
| 149 | IS 10749 : 1983 |
Specification for swivel head nut for screw type mounts in pusher legs | 0 | Jan, 2021 | Download | |
| 150 | IS 1076 : Part 1 : 1985/ISO 3 : 1973 (2 Revision) |
Preferred numbers: Part 1 series of preferred numbers (Second Revision) | 0 | Oct, 2021 | Buy | |
| 151 | IS 1076 : Part 2 : 1985/ISO 17 : 1973 (2 Revision) |
Preferred numbers: Part 2 guide to the use of preferred numbers and series of preferred numbers | 0 | Oct, 2021 | Buy | |
| 152 | IS 1076 : Part 3 : 1985/ISO 497 : 1973 (2 Revision) |
Preferred numbers: Part 3 guide to the choice of series of preferred numbers and of series containlng more rounded values of preferred numbers (Second Revision) | 0 | Oct, 2021 | Buy | |
| 153 | IS/ISO 10781 : 2015/IS/ISO 18758-1:2018 |
Health Informatics - HL 7 Electronic Health Record-System Functional Model, Release 2 (EHR FM) | 0 | ---- | Buy | |
| 154 | IS 10793 : Part 1 : 2018/ISO 6520-1:2007 |
Welding and allied processes - Classification of geometric imperfections in metallic materials: Part 1 fusion welding (First Revision) | 0 | Sep, 2023 | Buy | |
| 155 | IS 10793 : Part 2 : 2018/ISO 6520-2:2013 |
Welding and Allied Processes - Classification of Geometric Inperfections in Metallic Materials Part 2 Welding with Pressure (First Revision) | 0 | Sep, 2023 | Buy | |
| 156 | IS 10803 : 1984 |
Method of sampling and preparation of weld pad for chemical analysis of weld metal from covered electrodes for manual metal arc welding | 1 | Jan, 2019 | Download | |
| 157 | IS 10811 : 1984 |
Specification for oxygen and acetylene manifold regulators for welding, cutting and related processes | 0 | Mar, 2021 | Download | |
| 158 | IS/ISO 10815 : 2016/ISO 10815 : 2016 |
Mechanical vibration - Measurement of vibration generated internally in railway tunnels by the passage of trains | 0 | Feb, 2021 | Buy | |
| 159 | IS/ISO 10816 : Part 4 : 2009/ISO 10816 : Part 4 : 2009 |
Mechanical vibration - Evaluation of machine vibration by measurements on non - Rotating parts: Part 4 gas turbine sets with fluid - Film bearings | 0 | Apr, 2019 | Buy | |
| 160 | IS 10821 : 1984 |
Specification for calcium nitrate for explosive industry | 0 | Apr, 2021 | Download | |
| 161 | IS 10826 : 1984 |
Specification for pad saw | 1 | Mar, 2021 | Download | |
| 162 | IS 10827 : 1984 |
Specification for roving punches | 1 | Mar, 2021 | Download | |
| 163 | IS 10838 : 1984 |
Specification for nylon faced hammers | 1 | Mar, 2021 | Download | |
| 164 | IS 10839 : 1984 |
Jewellers' Saw | 1 | Mar, 2021 | Download | |
| 165 | IS 10842 : Part 1 : 2019/ISO 17642-1 : 2004 |
Destructive Tests on Welds in Metallic Materials - Cold Cracking Tests for Weldments - Arc Welding Processes Part 1 General ( First Revision ) | 0 | Sep, 2023 | Buy | |
| 166 | IS 10842 : Part 2 : 2019/ISO 17642-2 : 2005 |
Destructive Tests on Welds in Metallic Materials - Cold Cracking Tests for Weldments - Arc Welding Processes Part 2 Self-Restraint Tests ( First Revision ) | 0 | Sep, 2023 | Buy | |
| 167 | IS 10842 : Part 3 : 2019/ISO 17642-3 : 2005 |
Destructive Tests on Welds in Metallic Materials - Cold Cracking Tests for Weldments - Arc Welding Processes Part 3 Externally Loaded Test ( First Revision ) | 0 | Sep, 2023 | Buy | |
| 168 | IS 10851 : 1984 |
Specification for taper pin machine reamers with parallel shanks | 1 | Jan, 2021 | Download | |
| 169 | IS 10856 : 1993/ISO 6484:1986 (1 Revision) |
Earth - Moving machinery - Elevating scrapers - Volumetric ratings (First Revision) | 0 | Dec, 2022 | Buy | |
| 170 | IS 10859 : 1993/ISO 6483:1980 (1 Revision) |
Earth - Moving machinery - Dumper bodies - Volumetric ratings (First Revision) | 0 | Mar, 2023 | Buy | |
| 171 | IS 10860 : 1984 |
Carpenters' Wooden Bodied Bead Planes | 1 | Mar, 2021 | Download | |
| 172 | IS 10863 : 1984 |
Specification for one day alarm clocks | 0 | Mar, 2024 | Download | |
| 173 | IS 10865 : 1998 (1 Revision) |
Wrist watches -- Spring bars for watch cases and straps -- Specification (First Revision) | 0 | Mar, 2024 | Download | |
| 174 | IS 10882 : 1984 |
Specification for cam levers | 0 | Mar, 2022 | Download | |
| 175 | IS 10883 : 1984 |
Specification for single wheel type pipe cutters | 1 | Mar, 2021 | Download | |
| 176 | IS 10884 : 1984 |
Specification for carbide tipped chucking reamers with parallel shanks | 2 | Dec, 2022 | Download | |
| 177 | IS 10885 : 1984 |
Specification for carbide tipped chucking reamers with morse taper shanks with short cutting edge | 2 | Jan, 2021 | Download | |
| 178 | IS 10886 : 1984 |
Carpenters' Vice | 1 | Mar, 2021 | Download | |
| 179 | IS 10887 : 2001 (1 Revision) |
Steel wire ropes for winches and ropeways used in forestry and agriculture - Specification (First Revision) | 0 | Feb, 2022 | Download | |
| 180 | IS 10891 : Part 1 : 2001 (1 Revision) |
Steel wire ropes for aerial ropeways - Specification: Part 1 haulage ropes (First Revision) | 0 | Feb, 2022 | Download | |
| 181 | IS 10891 : Part 2 : 2018 (1 Revision) |
Specification for steel wire ropes for aerial ropeways: Part 2 track ropes | 0 | Mar, 2023 | Download | |
| 182 | IS 1090 : 2002 (3 Revision) |
Compressed Hydrogen - Specification (Third Revision) | 1 | Dec, 2023 | Download | |
| 183 | IS 1091 : 1985 (3 Revision) |
Specification for Nitrocellulose | 0 | Aug, 2023 | Download | |
| 184 | IS 10911 : 1984 |
Methods of inspection for straight bevel gears | 0 | Feb, 2021 | Download | |
| 185 | IS 10915 : 1984 |
Terms, definitions and types of twist drills | 1 | Jan, 2021 | Download | |
| 186 | IS 10941 : 1984 |
Sizes for dovetail guideways for machine tools | 0 | Jan, 2019 | Download | |
| 187 | IS 10942 : 2000 (1 Revision) |
Ferrule - Specification (First Revision) | 1 | Feb, 2021 | Download | |
| 188 | IS 10949 : 1984 |
Code of practice for painting procedure for machine tools | 0 | Jan, 2019 | Download | |
| 189 | IS 10952 : 1984/ISO 2306 : 1972 |
Recommendations for drills for use prior to tapping screw threads | 0 | Jan, 2021 | Buy | |
| 190 | IS 10968 : 1984 |
Drawing practice for simplified presentation | 0 | Mar, 2024 | Download | |
| 191 | IS/ISO 10968 : 2020/10968:2020 (1 Revision) |
Earth-Moving Machinery - Operator’s Controls ( First Revision ) | 0 | Jan, 2025 | Buy | |
| 192 | IS 10970 : 1984 |
Specification for keps for mine cages | 0 | Sep, 2020 | Download | |
| 193 | IS 10977 : 1984 |
Specification for pentarythritol for explosive industry | 1 | Sep, 2023 | Download | |
| 194 | IS 10978 : 1984 |
Specification for welding coupling assembly for oil - Hydraulic systems | 1 | Dec, 2024 | Download | |
| 195 | IS 10986 : 2013/ISO 6104:2005 (1 Revision) |
Superabrasive products - Rotating grinding tools with diamond or cubic boron nitride - General survey, designation and multilingual nomenclature (First Revision) | 0 | Jun, 2023 | Buy | |
| 196 | IS 10989 : 1984 |
Specification for cast or forged steel check valves (Flanged Or Butt Welding Ends) for petroleum, petrochemicals, chemicals and allied industries | 1 | Jul, 2020 | Download | |
| 197 | IS/ISO 10993 : Part 18 : 2020/ISO 4126-2:2018 |
Biological evaluation of medical devices Part 18 Chemical characterization of medical device materials within a risk management process | 0 | ---- | Buy | |
| 198 | IS 10994 : Part 1 : 1984 |
Specification for cartridges for shot guns L: Part 1 general requirements | 0 | Oct, 2017 | Download | |
| 199 | IS 10994 : Part 2 : 1984 |
Specification for cartridges for shot guns: Part 2 blank cartridges | 0 | Oct, 2017 | Download | |
| 200 | IS 10994 : Part 3 : 1984 |
Specification for cartridges for shot guns: Part 3 case empty | 0 | Oct, 2017 | Download | |
| 201 | IS 10994 : Part 4 : 1985 |
Specification for cartridges for shot guns: Part 4 cap filled | 0 | Oct, 2017 | Download | |
| 202 | IS 10994 : Part 5 : 1985 |
Specification for cartridges for shot guns: Part 5 anvil | 0 | Oct, 2017 | Download | |
| 203 | IS 10994 : Part 6 : 1985 |
Specification for cartridges for shot guns: Part 6 propellant | 0 | Oct, 2017 | Download | |
| 204 | IS 10994 : Part 7 : 1984 |
Specification for cartridges for shot guns: Part 7 discs | 0 | Oct, 2017 | Download | |
| 205 | IS 10994 : Part 8 : 1984 |
Specification for cartridges for shot guns L: Part 8 air cushion | 0 | Oct, 2017 | Download | |
| 206 | IS 10994 : Part 9 : 1984 |
Specification for cartridges for shot guns: Part 9 lead shots | 0 | Oct, 2017 | Download | |
| 207 | IS 10995 : 1984 |
Specification for tuning fork | 0 | Mar, 2021 | Download | |
| 208 | IS 10996 : 1984 |
Specification For Stop Clock With Fly-Back Action | 1 | Mar, 2021 | Download | |
| 209 | IS 11002 : 1984 |
Specification for machine jig reamers morse taper shank | 2 | Jan, 2021 | Download | |
| 210 | IS 11003 : Part 1 : 2017/ISO 6020-1:2007 (2 Revision) |
Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 mpa (160 Bar) series: Part 1 medium series (Second Revision) | 0 | Sep, 2024 | Buy | |
| 211 | IS 11003 : Part 2 : 2020/ISO 6020-2 : 2015 (2 Revision) |
Hydraulic Fluid Power — Mounting Dimensions for Single Rod Cylinders, 16 MPa ( 160 bar ) Series Part 2 Compact Series ( Second Revision ) | 0 | Dec, 2024 | Buy | |
| 212 | IS 11006 : 2011 (1 Revision) |
Flash back arrestor (Flame Arrestor) - Specification (First Revision) | 1 | Nov, 2021 | Download | |
| 213 | IS 11011 : 1984 |
Glossary of terms relating to wood working machines | 0 | Jan, 2019 | Download | |
| 214 | IS 11016 : 1984 |
General safety requirements for machine tools and their operation | 0 | Jan, 2019 | Download | |
| 215 | IS 11026 : 1984 |
Specification for razor hone | 0 | Oct, 2020 | Download | |
| 216 | IS 11027 : Part 1 : 2019/ISO 1132-1 : 2000 |
Rolling Bearing — Tolerances Part 1 Terms and Definitions ( First Revision ) | 0 | May, 2023 | Buy | |
| 217 | IS 11027 : Part 2 : 2018/ISO 1132-2 : 2001 |
Rolling Bearing - Tolerances Part 2 Meauring and Gauging Principles and Methods | 0 | May, 2023 | Buy | |
| 218 | IS 11038 : 1984 |
Specification for endless hexagonal belts for agricultural machinery and groove section of corresponding pulley | 0 | Feb, 2021 | Download | |
| 219 | IS/ISO 11040 : Part 2 : 2011/ISO 13579-1: 2013 |
Prefilled syringes Part 2 Plunger stoppers for dental local anaesthetic cartridges | 0 | ---- | Buy | |
| 220 | IS/ISO 11040 : Part 3 : 2012/ISO 13579-2 : 2013 |
Prefilled syringes Part 3 Seals for dental local anaesthetic cartridges | 0 | ---- | Buy | |
| 221 | IS 11042 : Part 1 : 2022/ISO 8000-66 : 2021 (1 Revision) |
ALPINE SKIS SKI BINDING SCREWS PART 1 REQUIREMENTS | 0 | ---- | Buy | |
| 222 | IS 1105 : 1957 |
Method for precise conversion of inch and metric dimensions to ensure interchangeability | 0 | Mar, 2022 | Download | |
| 223 | IS 11103 : 1984 |
Specification for cylindrical measuring pins (Size Range From 0.1 mm up to and including 20 mm) | 0 | Jan, 2020 | Download | |
| 224 | IS 11107 : 1984 |
Dimensions for modular units for machine tool construction - Columns | 0 | Jan, 2019 | Download | |
| 225 | IS/ISO 11112 : 1995/ISO 11112 : 1995 |
Earth Moving Machinery - Operator's Seat - Dimensions and Requirements | 0 | Mar, 2022 | Buy | |
| 226 | IS 11113 : 1999/ISO 5353:1995 (2 Revision) |
Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point (second revision) | 0 | Dec, 2022 | Buy | |
| 227 | IS 11114 : Part 2 : 2006/ISO 6746-1:2003 (2 Revision) |
Earth - Moving machinery - Definitions of dimensions and codes: Part 2 base machine (Second Revision) | 0 | Feb, 2023 | Buy | |
| 228 | IS/ISO 11114 : Part 2 : 2013/ISO 11114-2 : 2021 (1 Revision) |
Transportable Gas Cylinders - Compatibility of Cylinder and Valve Materials with Gas Contents Part 2 Non-Metallic Materials (First Revision) | 0 | Mar, 2019 | Buy | |
| 229 | IS 11114 : Part 3 : 2006/ISO 6746-2:2003 (2 Revision) |
Earth - Moving machinery - Definitions of dimensions and codes: Part 3 (Equipment And Attachments Second Revision) | 0 | Feb, 2023 | Buy | |
| 230 | IS/ISO 11114 : Part 3 : 2010/ISO 11114 : Part 3 : 2010 |
Gas cylinders - Compatibility of cylinder and valve materials with gas contents: Part 3 autogenous ignition test for non - Mettalic materials in oxygen atmosphere | 0 | Nov, 2021 | Buy | |
| 231 | IS/ISO 11114 : Part 4 : 2017/ISO 11114 Part 4 : 2 (1 Revision) |
Transportable Gas Cylinders ― Compatibility of Cylinder and Valve Materials with Gas Contents Part 4 Test Methods for Selecting Steels Resistant to Hydrogen Embrittlement (First Revision) | 0 | Apr, 2025 | Buy | |
| 232 | IS 11127 : 1984 |
Specification for holders for knurling wheels | 0 | Jan, 2021 | Download | |
| 233 | IS 11133 : 1984/ISO 5169 : 1977 |
Recommendations for symbols for lubrications appearing on machine tools | 0 | Jan, 2019 | Buy | |
| 234 | IS 11143 : 1984 |
Specification for ground high speed steel tool bits | 1 | Aug, 2024 | Download | |
| 235 | IS 11146 : 1999/ISO 7181 : 1991 (1 Revision) |
Hydraulic fluid power - Cylinders - Bore and rod area ratios (First Revision) | 0 | Sep, 2024 | Buy | |
| 236 | IS 11147 : 1984/ISO 4391 : 1983 |
Recommendations for parameter definitions and letter symbols for hydraulic fluid power pumps, motors and integral transmissions | 0 | Dec, 2024 | Buy | |
| 237 | IS 11152 : 1984 |
Specification for laboratory stands (Metallic) | 0 | Mar, 2021 | Download | |
| 238 | IS 11154 : Part 1 : 1994 (1 Revision) |
Nameplates -- Dimensions: Part 1 Square and rectangular nameplates (First Revision) | 0 | Mar, 2022 | Download | |
| 239 | IS 11154 : Part 2 : 1994 (1 Revision) |
Nameplates -- Dimensions: Part 2 Circular nameplates (First Revision) | 0 | Mar, 2022 | Download | |
| 240 | IS 11154 : Part 3 : 1994 (1 Revision) |
Nameplates -- Dimensions: Part 3 Triangular nameplates (First Revision) | 0 | Mar, 2022 | Download | |
| 241 | IS 11154 : Part 4 : 1994 (1 Revision) |
Nameplates -- Dimensions: Part 4 Elliptical and segmental nameplates (First Revision) | 0 | Mar, 2022 | Download | |
| 242 | IS 11172 : Part 1 : 2018/ISO 10889-1 : 2004 (1 Revision) |
Tool holders with cylindrical shank: Part 1 Cylindrical shank, location bore -- Specification (first revision) | 0 | Aug, 2024 | Buy | |
| 243 | IS 11183 : 1984 |
Specification for portable pneumatic rammers | 0 | Jun, 2021 | Download | |
| 244 | IS 11188 : Part 1 : 2021/ISO 13579-4 : 2013 (3 Revision) |
Vault Strong Room doors Part 1 specification (Third Revision) | 0 | ---- | Buy | |
| 245 | IS 1120 : 1975 (1 Revision) |
Specification for coach screws (First Revision) | 0 | Feb, 2021 | Download | |
| 246 | IS 11207 : 1983 |
Specification - For helmets for mountaineers | 0 | Dec, 2021 | Download | |
| 247 | IS 11241 : 1985 |
Specification for portable liquefied petroleum gas appliances operating at vapour pressure | 2 | Sep, 2021 | Download | |
| 248 | IS 11245 : 1999 (1 Revision) |
Pneumatic cylinders purchase - Specification (First Revision) | 0 | Dec, 2024 | Download | |
| 249 | IS 11249 : 1985 |
Data sheet for selection of front end loaders | 0 | Jan, 2025 | Download | |
| 250 | IS 11250 : 1985 |
Specification for bow saw frames | 0 | Mar, 2021 | Download | |
| 251 | IS 11251 : 1985 |
Specification for bow saw blades | 0 | Mar, 2021 | Download | |
| 252 | IS 11252 : 1993/ISO 6682:1986 (1 Revision) |
Earth - Moving machinery - Zones of comfort and reach for controls (First Revision) | 0 | Nov, 2022 | Buy | |
| 253 | IS 11277 : 2004/ISO 5596 : 1999 (1 Revision) |
Hydraulic fluid power - Gas - Loaded accumulators with separator - Ranges of pressures and volumes and characteristic quantities (First Revision) | 0 | Dec, 2024 | Buy | |
| 254 | IS 11278 : 1985 |
Specification for jig feet with cylindrical shank | 0 | Mar, 2022 | Download | |
| 255 | IS 11311 : 2011 (1 Revision) |
Technical requirements for loaders for use in underground mines (First Revision) | 0 | Sep, 2020 | Download | |
| 256 | IS 11312 : Part 1 : 1985 |
Specification for external upset drill pipe assemblies for use in water well drilling: Part 1 screwed on joints drill pipe | 1 | Jan, 2022 | Download | |
| 257 | IS 11325 : 1985 |
Specification for adjustable clamp support | 0 | Mar, 2022 | Download | |
| 258 | IS 11327 : 2022/ISO 6789-1 : 2017 (2 Revision) |
Requirements for Refrigerants Condensing Units (Second Revision) | 0 | ---- | Buy | |
| 259 | IS 11328 : 2022/ISO 8000-120 : 2016 (1 Revision) |
Self-contained Automatic Ice Makers Specification (First Revision) | 0 | ---- | Buy | |
| 260 | IS 11337 : 2002 (1 Revision) |
Purchase Specification for hydraulic cylinders (First Revision) | 0 | Sep, 2024 | Download | |
| 261 | IS 11344 : 1985 |
Dimen - Sions for sintered carbide pellets used in heading dies | 0 | Mar, 2021 | Download | |
| 262 | IS 11351 : 2005 (1 Revision) |
Stub self-holding tapers -- Dimensions (first revision) | 0 | Jan, 2021 | Download | |
| 263 | IS 11362 : 1985/ISO 7721-l 983 |
Head configuration and gauging of countersunk head screws | 0 | Feb, 2021 | Buy | |
| 264 | IS 11368 : Part 1 : 1985 |
Comparison of indian and overseas classification and coding of welding filler materials: Part 1 flux coated mild steel and medium tensile steel stick electrodes for manual metal - Arc welding | 1 | Jan, 2024 | Download | |
| 265 | IS 11372 : 1985 |
Proforma for purchase specification and technical features for belt drop hammers | 1 | Mar, 2021 | Download | |
| 266 | IS 11379 : 1985 |
Specification for wrenches for retaining screw for milling arbor | 0 | Mar, 2021 | Download | |
| 267 | IS 11381 : 1985 |
Specification for extractor cotter pin | 1 | Mar, 2021 | Download | |
| 268 | IS 11398 : 2018/ISO 6155 : 1998 (1 Revision) |
Machine Tools - Test Conditions for Horizontal Spindle Turret and Single Spindle Automatic Lathes - Testing of the Accuracy ( First Revision ) | 0 | ---- | Buy | |
| 269 | IS 11439 : 1985 |
Dimensions for fixing watch hands | 0 | Mar, 2024 | Download | |
| 270 | IS 1144 : 2022/ISO 8000-110 : 2021 (3 Revision) |
Textiles - Cotton Cellular Shirting - Specification (third revision) | 0 | ---- | Buy | |
| 271 | IS 11441 : 1985 |
Dimensions for ground carbide rounds | 1 | Jan, 2021 | Download | |
| 272 | IS 11443 : Part 1 : 2016 (2 Revision) |
Tools for pressing and moulding - Machined plates: Part 1 machined plates for press tools (Second Revision) | 0 | Mar, 2021 | Download | |
| 273 | IS 11443 : Part 2 : 2003 (1 Revision) |
Tools for pressing and moulding - Machined plates: Part 2 machined plates for moulds (First Revision) | 0 | Aug, 2024 | Download | |
| 274 | IS 11444 : 1985 |
Specification for grinding and polishing materials for optical components | 0 | Mar, 2022 | Download | |
| 275 | IS 11458 : 1985 |
Specification For Parallel Clamps | 1 | Mar, 2021 | Download | |
| 276 | IS 11483 : 1985 |
Specification for amorces (Paper Caps For Toy Piston) | 1 | Apr, 2021 | Download | |
| 277 | IS 11491 : 1985 |
Specification for blasting soluble nitrocellulose for explosives industry | 1 | Apr, 2021 | Download | |
| 278 | IS 11496 : 1985 |
General and performance test requirements of pallet truck and stillage truck | 0 | Jan, 2025 | Download | |
| 279 | IS 11505 : 1986 |
Recommendations on terminology of hardmetal heading diesISO title : hardmetal heading dies - Terminology) | 0 | Mar, 2021 | Download | |
| 280 | IS 11507 : 2015/ISO 5294 (2 Revision) |
Synchronous belt drives - Pulleys (Second Revision) | 0 | Jan, 2025 | Buy | |
| 281 | IS 11518 : 2023/ISO 6336-3 (1 Revision) |
Method for determination of The Magnetization coercivity in hardmetals | 0 | ---- | Buy | |
| 282 | IS 11522 : Part 1 : 1986/ISO 3002-1 : 1982 |
Recommendations for basic quantities in cutting and grinding: Part 1 Geometry of the active part of cutting tools, general terms, reference systems, tool and working angles and chip breakers | 0 | Nov, 2018 | Buy | |
| 283 | IS 11522 : Part 2 : 2015/ISO 3002-2 : 1982 |
Basic quantities in cutting and grinding: Part 2 Geometry of the active part of cutting tools -- General conversion formulae to relate tool and working angles | 0 | Dec, 2019 | Buy | |
| 284 | IS 11522 : Part 5 : 2017/ISO 3002-5 : 1989 |
Basic quantities in cutting and grinding: Part 5 Basic terminology for grinding processes using grinding wheels | 0 | ---- | Buy | |
| 285 | IS 11523 : 1998/ISO 3365 : 1985 (1 Revision) |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole -- Dimensions (first revision) | 0 | Nov, 2018 | Buy | |
| 286 | IS 11524 : 1986 |
Specification for carbide mandrels for tube drawing dies | 0 | Mar, 2021 | Download | |
| 287 | IS 11526 : 2013 (1 Revision) |
Pliers and nippers - Nomenclature (First Revision) | 0 | Aug, 2024 | Download | |
| 288 | IS 11552 : 2020 (1 Revision) |
Liquid Nitrogen Vessels of Capacity up to 75 Litres — Specification ( Second Revision ) | 1 | Jun, 2024 | Download | |
| 289 | IS 11559 : 1995/ISO 6982 : 1992 (1 Revision) |
Hydraulic fluid power - Cylinders - Rod end spherical eyes - Mounting dimensions (First Revision) | 0 | Dec, 2024 | Buy | |
| 290 | IS 11560 : 1995/ISO 6661: 1962 (1 Revision) |
Hydraulic fluid power - Cylinders - Rod end plain eyes - Mounting dimensions (First Revision) | 0 | Dec, 2024 | Buy | |
| 291 | IS 11562 : 1985 |
Specification for O-rings for wrist watch crowns and push buttons | 1 | Mar, 2024 | Download | |
| 292 | IS 11592 : 2000 (1 Revision) |
Selection and design of belt conveyors - Code of practice (First Revision) | 1 | Aug, 2020 | Download | |
| 293 | IS 1160 : 1993 (1 Revision) |
Metric dispensing measures - Specification (First Revision) | 1 | Apr, 2024 | Download | |
| 294 | IS 11613 : 1986 |
Specification for renewable lock screw locating pins | 0 | Mar, 2022 | Download | |
| 295 | IS 11614 : 1986 |
Specification for renewable threaded locating pins | 0 | Mar, 2022 | Download | |
| 296 | IS 11617 : 1986 |
Specification for regulating type liquid flow indicators | 1 | Sep, 2019 | Download | |
| 297 | IS 11618 : 1986 |
Specification for non - Regulating type liquid flow indicators | 0 | Sep, 2024 | Download | |
| 298 | IS 11619 : 1986 |
Specfication for scraper bars for armoured face conveyors | 0 | Jan, 2025 | Download | |
| 299 | IS 11648 : 1986 |
Nomenclature for modular machine tools | 0 | Jan, 2019 | Download | |
| 300 | IS 11663 : 1986 |
Conventional representations of common features and materials on technical drawings | 0 | Feb, 2021 | Download | |
| 301 | IS 11664 : 1986 |
Folding of drawing prints | 0 | Feb, 2021 | Download | |
| 302 | IS 11665 : 2010/ISO 7200 : 2004 |
Technical product documentation -- Data fields in title blocks and document headers (First Revision) | 0 | Mar, 2022 | Buy | |
| 303 | IS 11666 : 2015/ISO 7573 : 2008 (1 Revision) |
Technical product documentation -- Parts lists (First Revision) | 0 | Mar, 2022 | Buy | |
| 304 | IS 11668 : 1985/ISO 6411 : 1982 |
Technical drawings -- Simplified representation of centre holes | 0 | Mar, 2022 | Buy | |
| 305 | IS 11669 : 1986/ISO 129 : 1985 |
General principles of dimensioning on technical drawings | 0 | Feb, 2021 | Buy | |
| 306 | IS 11670 : 1993 (1 Revision) |
Technical drawings -- Abbreviations and symbols for use in technical drawings (First Revision) | 0 | Feb, 2021 | Download | |
| 307 | IS 11672 : 1986 |
Specification for tungsten carbide buttons and inserts for use in down - The - Hole (DTH) bits | 0 | Jan, 2022 | Download | |
| 308 | IS 11677 : 2004/ISO 3364 : 2011 (1 Revision) |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions (first revision) | 0 | Jan, 2021 | Buy | |
| 309 | IS 11681 : 2015/ISO 6426- 2 : 2002 (1 Revision) |
Horological vocabulary -- Technical and commercial definitions (First Revision) | 0 | Mar, 2021 | Buy | |
| 310 | IS 11684 : 1986 |
Test chart for spinning and planishing lathes | 0 | Mar, 2021 | Download | |
| 311 | IS 11699 : 1986 |
Specification for steel plug valves for petroleum, petrochemical and allied industries | 0 | Sep, 2018 | Download | |
| 312 | IS 11710 : Part 1 : 2005 (1 Revision) |
Selection and design of diamond core drills - Code of practice: Part 1 mechanical drive (First Revision) | 0 | Aug, 2020 | Download | |
| 313 | IS 11710 : Part 2 : 2005 (1 Revision) |
Selection and design of diamond core drills - Code of practice: Part 2 top drive hydraulic (First Revision) | 0 | Aug, 2020 | Download | |
| 314 | IS 11726 : 2017/ISO 2954 : 2012 (1 Revision) |
Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (First Revision) | 0 | Jan, 2022 | Buy | |
| 315 | IS 11738 : Part 1 : 1993 (1 Revision) |
Bulk handling equipment - Crawler tractors - Data sheet: Part 1 information to be supplied by purchaser (First Revision) | 0 | Mar, 2023 | Download | |
| 316 | IS 11738 : Part 2 : 1993 (1 Revision) |
Bulk handling equipment - Crawler tractors - Data sheet: Part 2 information to be supplied by manufacturer/supplier (First Revision) | 0 | Feb, 2023 | Download | |
| 317 | IS 11740 : 2014/ISO 10190 (1 Revision) |
Motorcycle chains - Characteristics and test methods (First Revision) | 0 | Jan, 2025 | Buy | |
| 318 | IS 11741 : 1986 |
Specification for circular saws for wood working | 0 | Aug, 2024 | Download | |
| 319 | IS 11742 : 1986 |
Test chart for die sets | 0 | Mar, 2021 | Download | |
| 320 | IS 1177 : 2022/ISO 16610-40 : 2015 (3 Revision) |
OIL OF VETIVER CULTIVATED AND KHUS SPECIFICATION | 0 | ---- | Buy | |
| 321 | IS/ISO/IEC 11770 : Part 7 : 2021/12123 |
Information Security - Key Management Part 7: Cross-Domain Password-Based Authenticated Key Exchange | 0 | ---- | Buy | |
| 322 | IS 11780 : 2023/ISO 6336-5 (1 Revision) |
CODE FOR SELECTION AND TESTING OF ROTARY SCREW AIR COMPRESSOR OIL-FLOODED First Revision of IS 11780 | 0 | ---- | Buy | |
| 323 | IS 11783 : 1986 |
Specification for ferrosilicon for explosive and pyrotechnic industry | 0 | Nov, 2023 | Download | |
| 324 | IS 1179 : 1967 (1 Revision) |
Specification for equipment for eye and face protection during welding (First Revision) | 2 | Jan, 2024 | Download | |
| 325 | IS 11791 : 1986 |
Specification for diaphragm type valves for general purposes | 0 | Sep, 2018 | Download | |
| 326 | IS/ISO/IEC 11801 : Part 1 : 2017/ISO 4126-4: 2013 |
Information technology Generic cabling for customer premises Part 1: General requirements | 0 | ---- | Buy | |
| 327 | IS 11803 : 1986 |
Specification for magnesium oxide for explosive ammunition protective compositions and pyrotechnic industry | 0 | Apr, 2021 | Download | |
| 328 | IS 11828 : 1987 |
Specification for miniature hand hacksaw frames | 0 | Feb, 2020 | Download | |
| 329 | IS 11829 : 1986 |
Specification for miniature hand hacksaw blades | 0 | Aug, 2024 | Download | |
| 330 | IS 11831 : 1986 |
Specification for jig foot bolts | 0 | Mar, 2022 | Download | |
| 331 | IS 11835 : Part 1 : 2005 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 1 Dimensions of the driving system of tool shanks (first revision) | 0 | Jan, 2021 | Download | |
| 332 | IS 11835 : Part 2 : 2004/ISO 5414-2 : 2002 (1 Revision) |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools: Part 2 Connecting dimensions of chucks and designation (first revision) | 0 | Jan, 2021 | Buy | |
| 333 | IS 11842 : 1986 |
Specification for pvc/plastic hygienic belting | 1 | Feb, 2021 | Download | |
| 334 | IS 11843 : 1986 |
Specification for jig foot nuts | 0 | Mar, 2022 | Download | |
| 335 | IS 11845 : Part 1 : 1994/ISO 5784-1 : 1988 (1 Revision) |
Fluid logic circuits for fluid power systems: Part 1 symbols for binary logic and related functions (First Revision) | 0 | Dec, 2024 | Buy | |
| 336 | IS 11845 : Part 2 : 1995/ISO 5784-2 : 1989 (1 Revision) |
Fluid Logic circuits for fluid - Power systems: Part 2 symbols for supply and exhausts as related to logic symbols (First Revision) | 0 | Dec, 2024 | Buy | |
| 337 | IS 11845 : Part 3 : 1994/ISO 5784-3 : 1989 (1 Revision) |
Fluid logic circuits for fluid power systems: Part 3 symbols for logic sequencers and related functions | 0 | Dec, 2024 | Buy | |
| 338 | IS 11846 : 1987/ISO 3476 |
Dimensions for modular units for machine tool construction - Tenon drive and flanges for mounting multi - Spindle heads | 0 | Jan, 2019 | Buy | |
| 339 | IS 11847 : 1987 |
Specification for spoke wrenches for bicycle and moped | 0 | Feb, 2025 | Download | |
| 340 | IS 11848 : 1987 |
Specification for crowfoot spanners | 0 | Feb, 2025 | Download | |
| 341 | IS/ISO 11862 : 1993/ISO 11862:1993 |
Earth-Moving Machinery - Auxiliary Starting Aid Electrical Connector | 0 | Nov, 2022 | Buy | |
| 342 | IS 11863 : 1986 |
Tolerances for worm gears | 0 | Feb, 2021 | Download | |
| 343 | IS 11874 : 1986 |
Specification for . hexagonal socket offset wrenches | 0 | Aug, 2024 | Download | |
| 344 | IS 11875 : 1986 |
Specification for diffuse pyranometer | 1 | Mar, 2025 | Download | |
| 345 | IS 11876 : 1986 |
Specification for airmeter | 1 | Feb, 2019 | Download | |
| 346 | IS 11923 : 2022/ISO 3669: 2020 (1 Revision) |
COCOA MASS (COCOA OR CHOCOLATE LIQUOR) - SPECIFICATION(FIRST REVISION OF IS 11923) | 0 | ---- | Buy | |
| 347 | IS 11934 : 1987 |
Specification for carbide tipped shell reamers | 0 | Aug, 2024 | Download | |
| 348 | IS 11935 : 1987 |
Specification for carbide tipped chucking reamers with morse taper shank with long cutting edge | 1 | Aug, 2024 | Download | |
| 349 | IS 11936 : 1987 |
Specification for carbide tipped long fluted machine reamer with morse taper shank | 1 | Aug, 2024 | Download | |
| 350 | IS 11937 : 1987 |
Specification for carbide tipped machine jig reamer with morse taper shank | 1 | Aug, 2024 | Download | |
| 351 | IS 11938 : 1987 |
Specification for tool adaptors for numerically controlled machine tools (Tool rotating type) | 1 | Aug, 2024 | Download | |
| 352 | IS 11940 : 1987 |
Specification for hide - Faced hammers | 0 | Aug, 2024 | Download | |
| 353 | IS 11941 : 1987 |
Specification For Hand Burnishers | 1 | Mar, 2021 | Download | |
| 354 | IS 11943 : Part 2 : 1987 |
Specification for hard metal burrs: Part 2 Cylindrical burrs (Type A) | 0 | Nov, 2018 | Download | |
| 355 | IS 11943 : Part 3 : 1987 |
Specification for hard metal burrs: Part 3 Cylindrical round -- (Ball - ) nose burrs (Type C) | 0 | Nov, 2018 | Download | |
| 356 | IS 11943 : Part 4 : 1987 |
Specification for hard metal burrs: Part 4 Spherical burrs (Type D) | 0 | Nov, 2018 | Download | |
| 357 | IS 11943 : Part 5 : 1987 |
Specification for hard metal burrs: Part 5 Oval burrs (Type E) | 0 | Nov, 2018 | Download | |
| 358 | IS 11943 : Part 6 : 1987 |
Specification for hard metal burrs: Part 6 Arch round - (Ball - ) nose burrs (Type F) | 0 | Nov, 2018 | Download | |
| 359 | IS 11943 : Part 7 : 1987 |
Specification for hard metal burrs: Part 7 Arch pointed nose burrs (Type G) | 0 | Nov, 2018 | Download | |
| 360 | IS 11943 : Part 8 : 1987 |
Specification for hard metal burrs: Part 8 Flame burrs (Type H) | 0 | Nov, 2018 | Download | |
| 361 | IS 11943 : Part 9 : 1987 |
Specification for hard metal burrs: Part 9 60° and 90° cone burrs (Type J and K) | 0 | Nov, 2018 | Download | |
| 362 | IS 11943 : Part 10 : 1987 |
Specification for hard metal burrs: Part 10 Conical round -- (Bal -l) nose burrs (Type L) | 0 | Aug, 2024 | Download | |
| 363 | IS 11943 : Part 11 : 1987 |
Specification for hard metal burrs: Part 11 Conical pointed -- Nose burrs (Type M) | 0 | Aug, 2024 | Download | |
| 364 | IS 11943 : Part 12 : 1987 |
Specification for hard metal burrs: Part 12 Inverted cone burrs (Type N) | 0 | Nov, 2018 | Download | |
| 365 | IS 11949 : 1987 |
Specification for turret sockets | 0 | Aug, 2024 | Download | |
| 366 | IS 11950 : 1987 |
Specification for tool adaptors for numerically controlled machine tools (Tool stationary type) | 0 | Aug, 2024 | Download | |
| 367 | IS 11958 : Part 1 : 2018/ISO 3070-1:2007 (1 Revision) |
Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle: Part 1 machines with fixed column and movable table (First Revision) | 0 | May, 2023 | Buy | |
| 368 | IS 11958 : Part 2 : 2019/ISO 3070-2 : 2015 (1 Revision) |
Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle: Part 2 machines with movable column as long the X - Axis (Floor Type) (First Revision) | 0 | May, 2023 | Buy | |
| 369 | IS 11961 : 1986 |
Specification for 4 - Metre levelling staff (Telescopic) | 0 | Mar, 2021 | Download | |
| 370 | IS 11991 : 1986 |
Recommended practice for flash butt welding of tubes, rods and other sections in carbon and alloy steels | 1 | Jan, 2019 | Download | |
| 371 | IS 11999 : 2022/ISO 9186-3 : 2014 (2 Revision) |
METALLIC MATERIALS SHEET AND STRIP DETERMINATION OF PLASTIC STRAIN RATIO (Second Revision) | 0 | ---- | Buy | |
| 372 | SP 12 : 1975 |
Handbook for gas welders | 0 | Mar, 2021 | Download | |
| 373 | IS 12060 : 1987 |
Code of practice for selection of rotary vane feeders | 0 | Feb, 2023 | Download | |
| 374 | IS 12091 : 1987 |
Specification for belt fasteners, hook type | 0 | Jul, 2024 | Download | |
| 375 | IS 12096 : 1987 |
Specification for hexagon socket screw plugs with parallel screw threads for fluid power system | 1 | Sep, 2024 | Download | |
| 376 | IS 12099 : 1987 |
Specification for triangular polishing blocks for the use in floor polishing machines | 0 | Oct, 2020 | Download | |
| 377 | IS 12101 : 1987 |
Specification for roller type hold - Back device | 0 | Feb, 2023 | Download | |
| 378 | IS 12102 : 1987 |
Specification for tapered roller bearings | 0 | Jan, 2023 | Download | |
| 379 | IS 12106 : 1987 |
Dimensions for modular units for machine tool construction - Spindle units | 0 | Jan, 2019 | Download | |
| 380 | IS 12108 : 1987 |
Code of practice for selection of rotary table feeders | 0 | Feb, 2023 | Download | |
| 381 | IS 12114 : Part 1 : 2018/ISO 3160-1 : 1998 (1 Revision) |
Watch-Cases and accessories -- Gold alloy coverings: Part 1 General requirements (First Revision) | 0 | Mar, 2024 | Buy | |
| 382 | IS 12114 : Part 2 : 2018/ISO 3160-2:2015 (1 Revision) |
Watch-Cases and accessories -- Gold alloy coverings: Part 2 Determination of fineness, thickness, corrosion resistance and adhesion (First Revision) | 0 | Mar, 2024 | Buy | |
| 383 | IS 12116 : Part 1 : 1987 |
Specification for hexagon head taper plugs for oil hydraulic systems: Part 1 made from forgings | 0 | Sep, 2024 | Download | |
| 384 | IS/ISO 12117 : Part 2 : 2008/ISO 12117 : Part 2 : 2008 |
Earth moving machinery laboratory tests and performance requirements for protective structures of excavators: Part 2 roll - Over protective structures (Rops) for excavators of over 6 t | 0 | ---- | Buy | |
| 385 | IS 12127 : 1987 |
Specification for two - Men cross cut saws | 0 | Mar, 2021 | Download | |
| 386 | IS 12128 : 1987 |
Specification for reversible handles for cross cut saws | 0 | Mar, 2021 | Download | |
| 387 | IS 12137 : 1987 |
General requirements of wagon puller/pusher | 0 | Feb, 2023 | Download | |
| 388 | IS 12140 : 1987 |
Data sheet for selection of dumpers | 0 | Mar, 2023 | Download | |
| 389 | IS 12150 : 2023/ISO 10110-14:2018 (1 Revision) |
Textiles - Method for Determination of Strength of Disperse Acetate Dyes by Exhaust Dyeing (First Revision) | 0 | ---- | Buy | |
| 390 | IS 12153 : 1987 |
Specification for adapters for hexagonal insert bits for use with ratchet screw drivers | 0 | Aug, 2024 | Download | |
| 391 | IS 12158 : 1987 |
Dimensions for shanks of punches and chisels and ITS chuck bushing for pneumatic rivet cutters | 0 | Jun, 2021 | Download | |
| 392 | IS 12160 : 2015/ISO 8015 : 2011 (1 Revision) |
Geometrical product specifications (GPS) -- Fundamentals --Concepts, principles and rules (First Revision) | 0 | Feb, 2021 | Buy | |
| 393 | IS 12166 : 1987 |
Specification for ratchet screwdrivers | 0 | Feb, 2020 | Download | |
| 394 | IS 12167 : 1987 |
Specification for spiral ratchet screw drivers | 0 | Feb, 2020 | Download | |
| 395 | IS 12168 : Part 1 : 1987 |
Specification for screwdriver bits for use with ratchet screwdrivers: Part 1 for slotted head screws | 0 | Feb, 2025 | Download | |
| 396 | IS 12168 : Part 2 : 1987 |
Specification for screw driver bits for the use with ratchet screw drivers: Part 2 for cross recessed head screws | 0 | Feb, 2020 | Download | |
| 397 | IS 12186 : 1987 |
Tolerances for ISO - vietric trapezoidal screw threads for lead and feed screw assemblies | 0 | Feb, 2025 | Download | |
| 398 | IS 12204 : 1987 |
Code of practice for selection of reciprocating feeders | 0 | Feb, 2023 | Download | |
| 399 | IS 12206 : 1993/ISO 7546 :1983 (1 Revision) |
Earth - Moving machinery - Loader and front loading excavator buckets - Volumetric ratings (First Revision) | 0 | Nov, 2022 | Buy | |
| 400 | IS 12214 : 1987 |
General requirements for rotary hose for water - Well drilling equipment | 0 | Jan, 2022 | Download | |
| 401 | IS 12215 : 1987 |
Code of practice for selection of belt feeders | 0 | Feb, 2023 | Download | |
| 402 | IS 12238 : 1987 |
Specification for colour and star matches in boxes | 0 | Apr, 2021 | Download | |
| 403 | IS 12242 : 1987 |
Specification for door hinges for machine tools | 0 | Mar, 2022 | Download | |
| 404 | IS 12250 : 1987 |
Specification for fixed clamp supports | 0 | Mar, 2022 | Download | |
| 405 | IS 12257 : Part 1 : 1987 |
Specification for pneumatic length measurement comparators: Part 1 general information on principles and methods | 1 | Mar, 2022 | Download | |
| 406 | IS 12257 : Part 2 : 1992 |
Pneumatic measurement: Part 2 design features of instruments working in high pressure range | 0 | Mar, 2022 | Download | |
| 407 | IS 12257 : Part 3 : 1992 |
Pneumatic measurement: Part 3 parameters of instruments working on high pressure | 0 | Mar, 2022 | Download | |
| 408 | IS 12257 : Part 4 : 1992 |
Pneumatic measurement - Specification: Part 4 general information and examples of application | 0 | Mar, 2022 | Download | |
| 409 | IS 12257 : Part 5 : 1996 |
Pneumatic measurement: Part 5 glossary of terms and definition | 0 | Mar, 2022 | Download | |
| 410 | IS 12276 : 1988 |
Specification for dextrin for explosive and pyrotechnic industry | 0 | Apr, 2021 | Download | |
| 411 | IS 12280 : 1988 |
Specification for tenon without counterbore | 0 | Jan, 2019 | Download | |
| 412 | IS 12281 : 1988 |
Mounting dimensions of machine tool doors with hinges | 0 | Jan, 2019 | Download | |
| 413 | IS 12295 : 2000/ISO 3875:2004 (1 Revision) |
Acceptance conditions for external cylindrical centreless grinding machines - Testing of the accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 414 | IS 12296 : 1988 |
Test chart for thread rolling machines with cylindrical dies | 0 | Jan, 2019 | Download | |
| 415 | IS 12318 : 2023/ISO 6336-6 (1 Revision) |
TEXTILES PICKING CONE AND PICKING STUD FOR JUTE LOOMS SPECIFICATION | 0 | ---- | Buy | |
| 416 | IS 12319 : 1988 |
Circular screwing dies -- General table of dimensions | 0 | Aug, 2024 | Download | |
| 417 | IS 12321 : 1988 |
Specification for circular screwing dies for ISO metric threads | 0 | Aug, 2024 | Download | |
| 418 | IS 12322 : 1988 |
Specification for circular screwing dies for taper pipe threads, R - Series | 0 | Aug, 2024 | Download | |
| 419 | IS 12323 : 1988 |
Specification for circular screwing dies for parallel pipe threads, G series | 0 | Jan, 2021 | Download | |
| 420 | IS 12324 : 1988 |
Specification for hexagonal die nuts | 0 | Aug, 2024 | Download | |
| 421 | IS 12325 : 1988 |
Specification for circular screwing dies for ISO metric conduit pipe threads | 1 | Aug, 2024 | Download | |
| 422 | IS 12339 : 2023/ISO 17779:2021 (1 Revision) |
TEXTILES CRANK SHAFT FOR JUTE LOOMS SPECIFICATION | 0 | ---- | Buy | |
| 423 | IS 12354 : 2002/ISO 6987: 1998 (1 Revision) |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole -- Dimensions (first revision) | 0 | Nov, 2018 | Buy | |
| 424 | IS 12359 : 1988 |
Guide for selection of wheels and castors | 0 | Jan, 2025 | Download | |
| 425 | IS 12400 : 1988 |
Code of practice for selection of electromagnetic feeders | 0 | Feb, 2023 | Download | |
| 426 | IS 12401 : 1988 |
Code of practice for selection of mechanical vibrating feeders | 0 | Feb, 2023 | Download | |
| 427 | IS 12402 : Part 1 : 1988 |
Mobile containers for solid waste: Part 1 general characteristics | 0 | Mar, 2022 | Download | |
| 428 | IS 12402 : Part 2 : 1988 |
Mobile containers for solid waste: Part 2 methods of test | 0 | Mar, 2022 | Download | |
| 429 | IS 12403 : 1988 |
Specification for spanners for conveyor belt - Fasteners | 0 | Jan, 2025 | Download | |
| 430 | IS 12405 : 1988 |
Specification for gear type flexible couplings | 0 | Mar, 2023 | Download | |
| 431 | IS 12412 : 1988 |
Specification for screw driver bits for the use with ratchet screw drivers: Part 2 for cross recessed head screws | 0 | Mar, 2021 | Download | |
| 432 | IS 12413 : 1988 |
Specification for wooden jointer for two - Men cross cut saws | 0 | Mar, 2021 | Download | |
| 433 | IS 12437 : 1988 |
Specification for zirconium powder for use in explosive and pyrotechnic industry | 1 | Sep, 2023 | Download | |
| 434 | IS 12450 : Part 1 : 1988 |
Steel headframes for mines: Part 1 principles of load computation and applicable factors of safety | 0 | Nov, 2018 | Download | |
| 435 | IS 12453 : 1988 |
Specification for nut drivers | 0 | Feb, 2025 | Download | |
| 436 | IS 12470 : 1988 |
Specification for square drive extension for hexagon insert bits for power socket wrenches | 0 | Feb, 2025 | Download | |
| 437 | IS 12471 : 1988 |
Dimensions for lengths of hands for clocks | 0 | Mar, 2024 | Download | |
| 438 | IS 12472 : 1988 |
Connecting dimensions, fits and dimension combinations of hands for clock | 0 | Mar, 2024 | Download | |
| 439 | IS 12476 : 1988 |
Specification for hexagon drive extensions (Adaptors) for hexagon insert bits for power socket wrenches | 0 | Feb, 2025 | Download | |
| 440 | IS 12477 : 1988 |
Specification for bushing for clock hands | 0 | Mar, 2024 | Download | |
| 441 | IS 12480 : 1988 |
Specification for spiral tapered screw extractors | 0 | Feb, 2025 | Download | |
| 442 | IS 12481 : 1988 |
Specification for hexagonal insert bits for hexagon socket head cap screws and hexagon socket set screws for power tools | 0 | Feb, 2025 | Download | |
| 443 | IS 12484 : 1999 (1 Revision) |
Cup seal for fluid power applications - Specification (First Revision) | 0 | Dec, 2024 | Download | |
| 444 | IS 12485 : 1988 |
Specification for metal bonded seals | 0 | Dec, 2024 | Download | |
| 445 | IS 1249 : 1997 (2 Revision) |
Recommendations for selection of grinding wheels (Second Revision) | 0 | Sep, 2024 | Download | |
| 446 | IS 12497 : Part 1 : 1988 |
Specification for plastic cartridges ,for shot guns: Part 1 general requirements | 0 | Mar, 2019 | Download | |
| 447 | IS 12497 : Part 3 : 1988 |
Specification for plastic cartridges for shot guns: Part 3 plastic body tube | 0 | Mar, 2019 | Download | |
| 448 | IS 12497 : Part 4 : 1988 |
Specification for plastic cartridges for shot guns: Part 4 plastic base wad | 0 | Mar, 2019 | Download | |
| 449 | IS 12497 : Part 5 : 1988 |
Specification for plastic cartridges for shot guns: Part 5 plastic power piston | 0 | Mar, 2019 | Download | |
| 450 | IS 12498 : 1988 |
Method of test for evaluation of performance of air pressure regulators | 0 | Sep, 2024 | Download | |
| 451 | IS/ISO 12508 : 1994/ISO 12508 : 1994 |
Earth - Moving machinery - Operator station and maintenance areas - Bluntness of edges | 0 | Nov, 2022 | Buy | |
| 452 | IS/ISO 12509 : 2004/ISO 12509 : 2004 |
Earth - Moving machinery - Lighting, signaling and marking lights and reflex - Reflector devices | 0 | ---- | Buy | |
| 453 | IS 12510 : 1988 |
Specification for wall clocks (battery operated) | 0 | Mar, 2024 | Download | |
| 454 | IS 12515 : 1988 |
Specification for wooden setting cat for two - Men cross cut saws | 0 | Mar, 2021 | Download | |
| 455 | IS 12521 : 2018/ISO 6788 : 1997 (1 Revision) |
Assembly tool for screws and nuts - Four - Way socket wrenches - Dimensions and torque test (First Revision) | 0 | Aug, 2024 | Buy | |
| 456 | IS 12522 : 1988 |
Specification for rubber mallets | 0 | Feb, 2025 | Download | |
| 457 | IS 12527 : 1988 |
General requirements for riders for buckets used in shaft sinking opeiRations in mines | 0 | Feb, 2025 | Download | |
| 458 | IS 12536 : 1989 |
Small tools -- Disc type gear shaper cutters -- Specification | 0 | Aug, 2024 | Download | |
| 459 | IS 12537 : 1989 |
Small tools -- Shank type gear shaper cutter -- Specification | 0 | Aug, 2024 | Download | |
| 460 | IS 12538 : 1989 |
Small tools -- Shank type gear shaper cutter -- Specification | 0 | Aug, 2024 | Download | |
| 461 | IS 12563 : 2001/ISO 2787 : 1984 (1 Revision) |
Rotary and percussive pneumatic tools - Performance test (First Revision) | 0 | Jun, 2021 | Buy | |
| 462 | IS 12577 : 1989 |
Sealing pliers - Specification | 0 | Aug, 2024 | Download | |
| 463 | IS 12578 : 1989 |
Watch Maker's Hammer, Flat Face | 0 | Mar, 2021 | Download | |
| 464 | IS 12582 : 1989 |
Tommy screws with fixed bar Specification | 0 | Jan, 2019 | Download | |
| 465 | IS 12586 : 2021/ISO 128-2:2022 (1 Revision) |
Brazed low carbon steel gas cylinders not exceeding 13 litre water capacity Specification | 0 | ---- | Buy | |
| 466 | IS 12593 : 2000/ISO 8131 : 1992 (1 Revision) |
Hydraulic fluid power - Single rod cylinders, 16 mpa (160 Bar) compact series - Tolerances (First Revision) | 0 | Dec, 2024 | Buy | |
| 467 | IS 12597 : 1988 |
Recommendation on units for fluid power system | 0 | Sep, 2024 | Download | |
| 468 | IS 1261 : 1959 |
Code of practice for seam welding in mild steel | 1 | Jan, 2019 | Download | |
| 469 | IS 12629 : 1989 |
Water well drilling - Rotary hose for rotary drilling - Recommended practice for care and use | 0 | Sep, 2019 | Download | |
| 470 | IS 12630 : 1989 |
Pyrotechnics - Fireworks black serpent pellets - Specification | 1 | Apr, 2021 | Download | |
| 471 | IS 12631 : 1989 |
Pyrotechnics - fireworks pencils - Specification | 1 | Apr, 2021 | Download | |
| 472 | IS 12632 : 1989 |
Pyrotechnics - Fireworks twinkling stars - Specification | 1 | Apr, 2021 | Download | |
| 473 | IS 12635 : 2000 (1 Revision) |
Water well drilling and blast hole drilling - Rock roller bit with non - Sealed ball and roller bearing arrangement - Technical supply conditions (First Revision) | 0 | Aug, 2020 | Download | |
| 474 | IS/ISO 12635 : 2021/ISO 8000-115 : 2018 |
GRAPHIC TECHNOLOGY PLATES FOR OFFSET PRINTING DIMENSIONS (SECOND REVISION OF IS 15552:2019/ISO 12635:2008) | 0 | ---- | Buy | |
| 475 | IS 12645 : 1993/ISO 9246:1988 (1 Revision) |
Earth - Moving machinery - Crawler and wheel tractor dozer blades - Volumetric ratings (First Revision) | 0 | Jan, 2025 | Buy | |
| 476 | IS 12647 : 2021/ISO 19085-2 : 2017 (1 Revision) |
Solid Waste Management Collection Equipment Requirements and Guidelines | 0 | ---- | Buy | |
| 477 | IS 12663 : Part 2 : 2000 |
Bulk handling equipment - Reclaimer - Data sheet for bucket wheel reclaimer (Rail Mounted): Part 2 information to be supplied by the purchaser | 0 | Feb, 2021 | Download | |
| 478 | IS 12663 : Part 3 : 2000 |
Bulk handling equipment - Reclaimer - Data sheet for bucket wheel reclaimer (Rail Mounted): Part 3 information to be supplied by the manufacturer | 0 | Feb, 2023 | Download | |
| 479 | IS 12681 : 1989 |
Sodium nitrate for explosives and pyrotechnic industry - Specification | 0 | Nov, 2023 | Download | |
| 480 | IS 12684 : 1989 |
Calcium stearate for explosives and - Pyrotechnic industry - Specification | 0 | Apr, 2021 | Download | |
| 481 | IS 12686 : 1989 |
Abrasives - Diamond or cubicboron nitride micron powder sizes | 0 | Oct, 2020 | Download | |
| 482 | IS 12687 : 1989 |
Small tools -- Subland twist drills with morse taper shank for holes prior to tapping screw threads -- Specification | 1 | Jun, 2023 | Download | |
| 483 | IS 12688 : 1989 |
Small tools -- Subland twist drills with parallel morse taper shank for clearance holes and countersinks head screws -- Specification | 1 | Aug, 2024 | Download | |
| 484 | IS 12689 : 1989 |
Small tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification | 1 | Aug, 2024 | Download | |
| 485 | IS 1269 : Part 1 : 1997 (2 Revision) |
Leagal metrology - Material measures of length: Part 1 woven metallic and glass fiber tape measures (Second Revision) | 1 | Apr, 2024 | Download | |
| 486 | IS 1269 : Part 2 : 1997 |
Legal metrology - Material measures of length: Part 2 steel tape measures | 1 | Apr, 2024 | Download | |
| 487 | IS 12690 : 1989 |
Small Tools -- Subland twist drills with morse taper shank for clearance holes and counterbores for slotted cheese head screws -- Specification | 1 | Aug, 2024 | Download | |
| 488 | IS 12692 : 1989 |
Small tools -- Subland twist drills with parallel shanks for clearance holes and countersinks for countersunk head screws -- Specification | 1 | Aug, 2024 | Download | |
| 489 | IS 12713 : 1989 |
Optical instruments - Permissible cosmetic defects and inspection of optical components | 0 | Mar, 2019 | Download | |
| 490 | IS 12716 : 2002 (1 Revision) |
End mills with indexable specification (first revision) | 0 | Aug, 2024 | Download | |
| 491 | IS 12723 : 2020/ISO 6432 : 1985 (1 Revision) |
Pneumatic Fluid Power - Single Rod Cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm - Basic and Mounting Dimensions ( First Revision ) | 0 | Dec, 2024 | Buy | |
| 492 | IS 12728 : 1989 |
Carbide tips for dead centres -- Specification | 1 | Aug, 2024 | Download | |
| 493 | IS 12735 : 1994 |
Wire rope slings - Safety criteria and inspection procedures for use (First Revision) | 0 | Jun, 2022 | Download | |
| 494 | IS 12738 : 1995/ISO 6430 : 1992 (1 Revision) |
Pneumatic fluid power 7 single rod cylinders, 1 000 kPa (Ib 10 bar) Series, With Integral Mountings, Bores From 32 Mm To 250 Mm - Mounting Dimensions (First Revision) | 0 | Dec, 2024 | Buy | |
| 495 | IS 12739 : 1989 |
Fireworks conical flowerpots - Specification | 1 | Jul, 2023 | Download | |
| 496 | IS 12745 : Part 1 : 1988/ISO 6426-1 : 1982 |
Horological vocabulary: Part 1 Technical and scientific definitions | 0 | Jul, 2019 | Buy | |
| 497 | IS 12776 : 2002 (1 Revision) |
Galvanized strand for earthing - Specification (First Revision) | 3 | Feb, 2022 | Download | |
| 498 | IS 1278 : 1972 (2 Revision) |
Specification for filler rods and wires for gas welding (Second Revision) | 2 | Jan, 2024 | Download | |
| 499 | IS 12781 : 1989 |
Marine bucket for sea surface temperature measurement - Specification | 0 | Feb, 2019 | Download | |
| 500 | IS 12849 : 2015/ISO 5391:2003 |
Pneumatic tools and machines - Vocabulary (First Revision) | 0 | Oct, 2024 | Buy | |
| 501 | IS 12850 : 1987/ISO 3610 : 1976 |
Modular units for machine tool construction - Support brackets | 0 | May, 2023 | Buy | |
| 502 | IS 12852 : 1989 |
Gap frame hydraulic presses up to 4000 KN - Recommendation on preferred capacities and dimensions | 1 | Mar, 2021 | Download | |
| 503 | IS 12854 : 1989 |
Power Transmission - Belts, endless flat (Used in lenix drive systems specification) | 0 | Feb, 2021 | Download | |
| 504 | IS 12858 : 1989 |
Belt punches for conveyor belt fasteners (Plate type) - Specification | 0 | Mar, 2021 | Download | |
| 505 | IS 12866 : 2021/ISO/TR 20218-1:2018 (1 Revision) |
Plastic Translucent Sheets made from Thermo-Setting Polyester Resin Glassfibre Reinforced - Specification | 0 | ---- | Buy | |
| 506 | IS 12871 : 2022/ISO 16092-2 : 2019 (2 Revision) |
COPPER LEAD ZINC AND NICKEL CONCENTRATES SAMPLING PROCEDURES FOR DETERMINATION OF METAL AND MOISTURE CONTENT (Second Revision) | 0 | ---- | Buy | |
| 507 | IS 12874 : 1989 |
Optical and mathematical instruments - Telescopic alidade - specification | 0 | Mar, 2019 | Download | |
| 508 | IS 12888 : 1989 |
Optical and mathematical instruments - Short range infrared distance measuring instruments specification | 0 | Mar, 2019 | Download | |
| 509 | IS 12907 : 1990 |
Screw feeder - Purchasers data sheet | 0 | Aug, 2020 | Download | |
| 510 | IS 12924 : 2023/ISO 10263-1 : 2009 (1 Revision) |
BURA- Specification | 0 | ---- | Buy | |
| 511 | IS 12935 : 2023/ISO 14839-3:2006 (1 Revision) |
RECOMMENDED INDUSTRIAL SCREENSWIRE NETTING FOR GRADING SUGAR SPECIFICATIOIN First Revision | 0 | ---- | Buy | |
| 512 | IS 12936 : 2017 (1 Revision) |
Basic requirements for delivery persons engaged in the delivery of LPG cylinders - Code of practice (First Revision) | 0 | Jul, 2022 | Download | |
| 513 | IS 12937 : 1990 |
Engineering metrology - Methods of testing straightness, flatness and perpendicularity | 1 | Nov, 2024 | Download | |
| 514 | IS 12941 : 1990 |
Code of practice for selection and use of super capacity bucket elevator | 0 | Aug, 2020 | Download | |
| 515 | IS 12959 : 1990 |
Technical supply requirements for sprocket wheels for link chains | 0 | Oct, 2021 | Download | |
| 516 | IS 12960 : 1990 |
Determination of power requirements of screw feeders - General requirements | 0 | Aug, 2020 | Download | |
| 517 | IS 12961 : 1990 |
U - Link for chains for bucket elevators - Specification | 0 | Aug, 2020 | Download | |
| 518 | IS 12980 : 1990 |
Fireworks rockets - Specification | 1 | Apr, 2021 | Download | |
| 519 | IS 12984 : 1990 |
Proforma for puruchase specification for plate bending machines | 0 | Mar, 2021 | Download | |
| 520 | IS 12985 : 1990 |
Nippers, end - Cutting - Toggle lever assisted - Specification | 0 | Mar, 2021 | Download | |
| 521 | IS 13007 : 2018/ISO 6848:2015 (1 Revision) |
Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (First Revision) | 0 | Mar, 2023 | Buy | |
| 522 | IS/ISO 13031 : 2016/ISO 13031:2016 |
Earth-Moving Machinery - Quick Couplers - Safety | 0 | ---- | Buy | |
| 523 | IS 13040 : 1991 |
Dolly blocks for use in steel body repairs - General requirements | 0 | Mar, 2021 | Download | |
| 524 | IS/ISO 13041 : Part 3 : 2009/ISO 13041 : Part 3 : 2009 |
Test conditions for numerically controlled turning machines and turning centres: Part 3 geometric tests for machines with inverted vertical workholding spindles | 0 | Mar, 2022 | Buy | |
| 525 | IS/ISO 13041 : Part 4 : 2004/ISO 13041 : Part 4 : 2004 |
Test conditions for numerically controlled turning machines and turning centres: Part 4 accuracy and repeatability of positioning of linear and rotary axes | 0 | Mar, 2022 | Buy | |
| 526 | IS/ISO 13041 : Part 5 : 2015/ISO 13041-5 : 2015 (1 Revision) |
Test conditions for numerically controlled turning machines and turning centers: Part 5 accuracy of speeds and interpolations (First Revision) | 0 | Jun, 2017 | Buy | |
| 527 | IS/ISO 13041 : Part 6 : 2009/ISO 13041 : Part 6 : 2009 |
Test conditions for numerically controlled turning machines and turning centres: Part 6 accuracy of a finished test piece | 0 | Mar, 2022 | Buy | |
| 528 | IS/ISO 13041 : Part 7 : 2004/ISO 13041 : Part 7 : 2004 |
Test conditions for numerically controlled turning machines and turning centres: Part 7 evaluation of contouring performance in the coordinate planes | 0 | Mar, 2022 | Buy | |
| 529 | IS/ISO 13041 : Part 8 : 2004/ISO 13041-8:2004 |
Test conditions for numerically controlled turning machines and turning centres: Part 8 evaluation of thermal distortions | 0 | Mar, 2022 | Buy | |
| 530 | IS 13043 : 1991 |
Covered manual metal arc welding electrodes - Determination of efficiency, metal recovery and deposition co - Efficient | 0 | Jan, 2024 | Download | |
| 531 | IS 13053 : 1991 |
Hydraulic fluid power system commissiontng and maintenance of complete hydraulic systems recommendations | 0 | Sep, 2024 | Download | |
| 532 | IS 13058 : 1991/ISO 7592:1983 |
Calibrated round steel link lifting chains - Guidelines for proper use and maintenance | 0 | Oct, 2020 | Buy | |
| 533 | IS 13065 : 1991 |
Bulk handling equipment - Wagon marshalling equipment - Endless rope type - General requirements | 0 | Mar, 2022 | Download | |
| 534 | IS 13076 : 1991 |
Hand trolley for carrying mail bags - Specification | 0 | Mar, 2023 | Download | |
| 535 | IS 13078 : 1991 |
Pneumatic hose couplings - Specification | 0 | Jun, 2021 | Download | |
| 536 | IS 13081 : 1991 |
Earth moving machinery - Symbols - Guidelines for development and evaluation | 0 | Jan, 2025 | Download | |
| 537 | IS 13082 : Part 1 : 1991 |
Bulk handling equipment - Ship unloader - Gantry mounted grab type - Code of practice for design, manufacture and erection:: Part 1 mechanical and structural requirements | 0 | Mar, 2022 | Download | |
| 538 | IS 13082 : Part 2 : 1991 |
Bulk handling equipment - Ship unloader - Gantry mounted grab type - Code of practice for design, manufacture and erection,: Part 2 electro - Mechanical requirements | 0 | Mar, 2022 | Download | |
| 539 | IS 13082 : Part 3 : 1991 |
Bulk handling equipment - Ship unloader - Gantry mounted grab type - Code of practice for design, manufacture and erection,: Part 3 information to be supplied by purchaser and the manufacturer | 0 | Mar, 2022 | Download | |
| 540 | IS 13085 : 1991/ISO 8136 : 1986 |
Hydraulic fluid power - Single rod cylinders, 160 bar (16 Mpa) medium series - Port dimensions | 0 | Sep, 2024 | Buy | |
| 541 | IS 13088 : 2021/ISO 19085-7 : 2019 (1 Revision) |
Technical product documentation — Representation of splines and serrations (First Revision) | 0 | ---- | Buy | |
| 542 | IS 13093 : 2002 (1 Revision) |
Sheet metal body repair steel hammers - General requirements (First Revision) | 0 | Mar, 2021 | Download | |
| 543 | IS 13095 : 2020 (1 Revision) |
Butterfly Valves for General Purposes ( First Revision ) | 2 | Jun, 2024 | Download | |
| 544 | IS 13102 : 1991/ISO 8137 : 1986 |
Hydraulic - Fluid power - Single rod cylinders, 250 bar (25 Mpa) series - Port dimensions | 0 | Sep, 2024 | Buy | |
| 545 | IS 13103 : 2005/ISO 8138:1998 (1 Revision) |
Hydraulic fluid power - Single rod cylinders, 16 mpa (160 Bar) compact series - Port dimensions (First Revision) | 0 | Dec, 2024 | Buy | |
| 546 | IS 13113 : 1991 |
Bulk handling equipment - Wagon marshalling equipment - Endless rope type - Data sheet | 0 | Mar, 2022 | Download | |
| 547 | IS 13130 : Part 1 : 1991 |
Wrist watches and watch movements -- Specification: Part 1 Mechanical watches | 0 | Mar, 2024 | Download | |
| 548 | IS 13130 : Part 2 : 1991 |
Wrist watches and watch movements -- Specification: Part 2 Quartz electronic watches | 0 | Mar, 2024 | Download | |
| 549 | IS 13136 : 1991 |
Arms and ammunition - Rifle - Air rifle spring operated - Specification | 2 | Nov, 2022 | Download | |
| 550 | IS 13148 : Part 1 : 1999/ISO 5049-1:1994 (1 Revision) |
Mobile equipment for continuous handling of bulk materials: Part 1 rules for the design of steel structure (First Revision) | 0 | Mar, 2023 | Buy | |
| 551 | IS 13156 : 1991 |
Sheave pulley blocks for wire rope - Specification | 0 | Oct, 2020 | Download | |
| 552 | IS 13159 : Part 1 : 1993 |
Pipe flanges and flanged fittings specification: Part 1 dimensions | 0 | Sep, 2018 | Download | |
| 553 | IS 13167 : 1991 |
Side and face milling cutters with indexable inserts -- Specification | 0 | Aug, 2024 | Download | |
| 554 | IS 13174 : Part 1 : 2022/ISO 15792-1:2020 (1 Revision) |
Life Cycle Costing Part 1 Terminology | 0 | ---- | Buy | |
| 555 | IS 13178 : 1991 |
Clamping studs for machine tools - Specification | 0 | Mar, 2022 | Download | |
| 556 | IS 13189 : 1991 |
Lead hammers - Specification | 0 | Aug, 2024 | Download | |
| 557 | IS 13202 : 2012 (1 Revision) |
Mine haulage tracks - Code of practice (First Revision) | 0 | Feb, 2022 | Download | |
| 558 | IS/ISO 13203 : 2005 |
Chains, sprockets and accessories - List of equivalent terms | 0 | Jan, 2025 | Buy | |
| 559 | IS 13219 : 1992 |
Rock bolts for mines (Cement Grouted) - General requirements | 0 | Nov, 2018 | Download | |
| 560 | IS 13227 : 1991 |
Fireworks whistles - Specification | 1 | Apr, 2021 | Download | |
| 561 | IS 1323 : 1982 (2 Revision) |
Code of practice for Oxy - Acetylene welding for structural work in mild (Second Revision) | 0 | Jan, 2019 | Download | |
| 562 | IS 13230 : 1992 |
Graphical symbols for use on mine plans | 0 | Nov, 2018 | Download | |
| 563 | IS 13244 : 1991 |
Half side and face cutters with indexable inserts -- Specification | 0 | Jan, 2021 | Download | |
| 564 | IS 13251 : 2019/ISO 8132:2014 (1 Revision) |
Hydraulic fluid power ? mounting dimensions for accessories for single rod cylinders, 16 mpa (160 Bar) medium and 25 mpa (250 Bar) series (First Revision) | 0 | ---- | Buy | |
| 565 | IS 13253 : 1992/ISO 8925:1989 |
Earth - Moving machinery - Diagnostic ports | 0 | Mar, 2023 | Buy | |
| 566 | IS 13258 : 2014 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gas - Requirements for inspection and reconditioning of used lpg cylinders (First Revision) | 1 | Mar, 2024 | Download | |
| 567 | IS 13276 : Part 1 : 2000/ISO 2631-:1997 (1 Revision) |
Mechanical vibration and shock - Evaluation of human exposure to whole body vibration: Part 1 general requirements (First Revision) | 1 | Dec, 2024 | Buy | |
| 568 | IS 13281 : 1999/ISO 5805:1997 (1 Revision) |
Mechanical vibration and shock affecting man - Vocabulary (First Revision) | 0 | Mar, 2022 | Buy | |
| 569 | IS 13303 : 1992 |
Countersinks 60-degree, 90-degree and 120-degree with morse taper shank -- Specification | 0 | Aug, 2024 | Download | |
| 570 | IS 13304 : 1992 |
Countersinks 60°,90° and 120° with parallel shank -- Specification | 0 | Aug, 2024 | Download | |
| 571 | IS 13308 : 1992 |
Lifting appliances - Sheaves - Technical supply condition | 0 | Jan, 2025 | Download | |
| 572 | IS 13316 : 2023/ISO 20928 (1 Revision) |
WELDED AUSTENITIC STAINLESS-STEEL TUBES FOR HEAT EXCHANGERS FOR THE SUGAR INDUSTRY SPECIFICATION First Revision | 0 | ---- | Buy | |
| 573 | IS 13323 : 2018/ISO 9343 : 2004 (1 Revision) |
Pliers and nippers - Slip joint pliers - Dimensions and test values (First Revision) | 0 | Aug, 2024 | Buy | |
| 574 | IS 13324 : 1992 |
Screw feeders - General requirements | 0 | Jan, 2023 | Download | |
| 575 | IS/ISO 13333 : 1994/ISO 13333:1994 |
Earth-Moving Machinery - Dumper Body Support and Operators Cab Tilt Support Devices | 0 | Nov, 2022 | Buy | |
| 576 | IS 13336 : 1992 |
Reducer coupling assemblies for oil hydraulic system - Specification | 1 | Sep, 2024 | Download | |
| 577 | IS 13337 : 1992 |
Straight reducer coupling body for oil hydraulic system - Specification | 1 | Sep, 2024 | Download | |
| 578 | IS 13338 : 1992 |
Hexagonal head screw plugs with shoulder and parallel screw threads - Specification | 0 | Sep, 2024 | Download | |
| 579 | IS 13345 : 1992 |
Carpenter’s Bevels - Specification | 0 | Aug, 2024 | Download | |
| 580 | IS 13360 : Part 5 : Sec 1 : 2021/ISO 3548-3 : 2012 (2 Revision) |
Plastics - Methods of testing: Part 5 Mechanical properties Section 1 Determination of tensile properties - General requirements Second Revision | 0 | ---- | Buy | |
| 581 | IS 13360 : Part 5 : Sec 4 : 2021/ISO 8430-1 : 2016 (1 Revision) |
Plastics - Methods of Testing Part 5 : Mechanical Properties Sec 4 Determination of Izod Impact Strength | 0 | ---- | Buy | |
| 582 | IS 13360 : Part 6 : Sec 3 : 2022/ISO 16016 : 2016 (3 Revision) |
PLASTICS METHOD OF TESTING PART 6 THERMAL PROPERTIES SECTION 3 DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD GENERAL TEST METHOD | 0 | ---- | Buy | |
| 583 | IS 13360 : Part 8 : Sec 1 : 2022/ISO 8000-116 : 2019 (2 Revision) |
Plastics Methods of Testing Part 8 PermanenceChemical Properties Section 1 Determination of Water Absorption First Revision | 0 | ---- | Buy | |
| 584 | IS 13360 : Part 8 : Sec 8 : 2021/ISO 5183 - 1 : 1998 (2 Revision) |
Plastics Methods of testing Part 8 Permanencechemical properties Section 8 Determination of Ash General Methods First Revision | 0 | ---- | Buy | |
| 585 | IS 13360 : Part 11 : Sec 10 : 2022/ISO 15519-2 : 2015 (1 Revision) |
PLASTICS - METHODS OF TESTING PART 11 SPECIAL PROPERTIES SECTION 10 RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS DETERMINATION OF APPARENT VISCOSITY USING A SINGULAR CYLINDER TYPE ROTATIONAL VISCOMETER METHOD | 0 | ---- | Buy | |
| 586 | IS 13367 : Part 1 : 1992 |
Safe use of cranes - Code of practice : Part 1 general | 0 | Jan, 2025 | Download | |
| 587 | IS/ISO 13373 : PART 1 : 2002/ISO 13373 : PART 1 : 2002 |
Condition monitoring and diagnostics of machines - Vibration condition monitoring: Part 1 general procedures | 0 | Feb, 2021 | Buy | |
| 588 | IS/ISO 13373 : PART 2 : 2016/ISO 13373 : PART 2 : 2016 (1 Revision) |
Condition Monitoring and Diagnostics of Machines - Vibration Condition Monitoring Part 2 Processing Analysis and Presentation of Vibration Data (First Revision) | 0 | Feb, 2021 | Buy | |
| 589 | IS 13379 : 1992 |
Forestry tools - Wooden setting cat, bow saw blades - Specification | 0 | Mar, 2021 | Download | |
| 590 | IS 13380 : 1992 |
Forestry tools - Hole punch, bow saw blades - Specification | 0 | Mar, 2021 | Download | |
| 591 | IS 13405 : 2018/ISO 246 : 2007 (2 Revision) |
Rolling bearings - Cylindrical roller bearings, separate thrust collars - Boundary dimensions (Second Revision) | 0 | May, 2023 | Buy | |
| 592 | IS 13432 : 2003/ISO 24410:2020 |
MECHANICAL TYPE GAS LEAK DETECTOR FOR USE WITH LOW PRESSURE LIQUEFIED PETROLEUM GAS BURNING APPLIANCES SPECIFICATION | 0 | ---- | Buy | |
| 593 | IS 13434 : 2005/ISO 8135:1999 (1 Revision) |
Hydraulic fluid power - Single rod cylinders, 16 mpa (160 Bar) medium and 25 mpa (250 Bar) series - Tolerances (First Revision) | 0 | Dec, 2024 | Buy | |
| 594 | IS 13436 : 1992 |
Sensitive anemometer - Specification | 0 | Feb, 2019 | Download | |
| 595 | IS 13445 : Part 1 : 1992 |
Industrial Water Tube Boilers- Supplier's Data Sheet :Part 1 Proposal Stage | 0 | Feb, 2022 | Download | |
| 596 | IS 13445 : Part 2 : 1992 |
Suppliers Data Sheet for Industrial Water Tube Boilers: Part 2 Post Order Stage | 0 | Feb, 2022 | Download | |
| 597 | IS 13448 : 1992 |
Meteorology - Thermoelectric Pyrheliometer - Specification | 0 | Mar, 2025 | Download | |
| 598 | IS 13450 : Part 2 : Sec 70 : 2022/ISO 8000-62 : 2022 |
Medical electrical equipment Part 2 - Particular requirements for basic safety and essential performance Section 70 : Sleep apnoea breathing therapy equipment | 0 | ---- | Buy | |
| 599 | IS 13450 : Part 4 : Sec 1 : 2020/IEC 60601-4-1:2017 |
Medical electrical equipment: Part 4 Guidance and interpretation: Section 1 Medical electrical equipment and medical electrical systems employing a degree of autonomy | 0 | ---- | Buy | |
| 600 | IS 13459 : 1992 |
Angstrom Pyrheliometer - Specification | 0 | Mar, 2025 | Download | |
| 601 | IS/ISO 13459 : 2012/ISO 13459:2012 |
Earth-Moving Machinery - Trainer Seat - Deflection Limiting Volume, Space Envelope and Performance Requirements | 0 | ---- | Buy | |
| 602 | IS 13473 : Part 1 : 2015/ISO 4306-1:2007 (1 Revision) |
Cranes - Vocabulary: Part 1 general | 0 | Oct, 2020 | Buy | |
| 603 | IS 13497 : 2017 (1 Revision) |
Fusible plug for dissolved acetylene gas cylinder - Specification (First Revision) | 0 | Jul, 2022 | Download | |
| 604 | IS 13517 : 1992 |
Rock bolts - Resin type - Specification | 0 | Nov, 2018 | Download | |
| 605 | IS 13520 : 1992 |
Diamond abrasive frame saw blades - Specification | 0 | Oct, 2020 | Download | |
| 606 | IS 13521 : 1992 |
Marking system for diamond/cubic boron nitride abrasive products | 0 | Oct, 2020 | Download | |
| 607 | IS 13522 : 1992 |
Charcoal for explosives and pyrotechnic compositions - Specification | 2 | Apr, 2021 | Download | |
| 608 | IS 13524 : 1992 |
Potassium Perchlorate for Explosives and Pyrotechnic Compositions specification | 0 | Apr, 2021 | Download | |
| 609 | IS 13526 : 1992 |
Sodium perchlorate solution for explosives and pyrotechnic compositions - Specification | 0 | Apr, 2021 | Download | |
| 610 | IS 13533 : 2019/ISO 4395:2009 (1 Revision) |
Fluid power systems and components ? cylinder piston rod end types and dimensions (First Revision) | 0 | Aug, 2023 | Buy | |
| 611 | IS 13535 : 2017/ISO 16889 : 2008 (2 Revision) |
Hydraulic fluid power - Filters - Filter multi - Pass method for evaluating filtration performance of filter element (Second Revision) | 0 | Sep, 2024 | Buy | |
| 612 | IS 13540 : Part 1 : 1992 |
Arms and ammunition - 4.5 mm (177) air rifle and air pistol pellets: Part 1 general purpose | 0 | Mar, 2019 | Download | |
| 613 | IS 13541 : Part 1 : 1993 |
Arms and ammunition - 55 mm (. 22) air rifle and air pistol pellets: Part 1 general purpose | 0 | Mar, 2019 | Download | |
| 614 | IS 13543 : 1992/ISO 2891 : 1997 |
Modular units for machine tool construction - Centre bases and columns | 0 | May, 2023 | Buy | |
| 615 | IS 13547 : Part 1 : 2010/ISO 9409-1 : 2004 (1 Revision) |
Manipulating industrial robots -- Mechanical interfaces: Part 1 Plates (second revision) | 0 | Feb, 2020 | Buy | |
| 616 | IS 13547 : PART 2 : 2010/ISO 9409-2 : 2002 (1 Revision) |
Manipulating industrial robots -- Mechanical interfaces: Part 2 Shafts (first revision) | 0 | Feb, 2020 | Buy | |
| 617 | IS 13552 : 2019/ISO 1985 : 2015 (1 Revision) |
Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 618 | IS 13558 : Part 1 : 2018/ISO 7752-1 : 2010 (1 Revision) |
Cranes - Control layout and characteristics: Part 1 general principles (First Revision) | 0 | Feb, 2023 | Buy | |
| 619 | IS 13558 : Part 2 : 2018/ISO 7752-2:2011 (1 Revision) |
Cranes - Control layout and characteristics: Part 2 basic arrangement and requirements for mobile cranes (First Revision) | 0 | Feb, 2023 | Buy | |
| 620 | IS 13558 : Part 3 : 2018/ISO 7752-3:2013 (1 Revision) |
Cranes - Control layout and characteristics: Part 3 tower cranes (First Revision) | 0 | Feb, 2023 | Buy | |
| 621 | IS 13558 : Part 4 : 1993/ISO 7752-4:1989 |
Cranes - Controls - Layout and characteristics: Part 4 jib cranes | 0 | Feb, 2023 | Buy | |
| 622 | IS 13559 : Part 1 : 1993/ISO 9374-1:1989 |
Cranes - Information to be provided: Part 1 general | 0 | Feb, 2023 | Buy | |
| 623 | IS 13559 : Part 4 : 1992/ISO 9374-4:1989 |
Cranes - Information to be provided: Part 4 jib cranes | 0 | Feb, 2023 | Buy | |
| 624 | IS/ISO 13567 : PART 1 : 2017/ISO 10987-2 (1 Revision) |
Technical product documentation — Organization and naming of layers for CAD — Part 1: Overview and principle (First Revision) | 0 | ---- | Buy | |
| 625 | IS/ISO 13567 : Part 2 : 2017/ISO 10987-3 (1 Revision) |
Technical product documentation — Organization and naming of layers for CAD — Part 2: Concepts, format and codes used in construction documentation (First Revision) | 0 | ---- | Buy | |
| 626 | IS 13569 : 1993/ISO 3722 : 1976 |
Hydraulic fluid power - Fluid sample containers - Qualifying and controlling cleaning methods | 0 | Aug, 2023 | Buy | |
| 627 | IS 13570 : 2000/ISO 4021 : 1992 (1 Revision) |
HYDRAULIC FLUID POWER - PARTICULATE CONTAMINATION ANALYSIS - EXTRACTlON OF FLUID SAMPLES FROM LINES OF AN OPERATING SYSTEM (First Revision) | 0 | Aug, 2023 | Buy | |
| 628 | IS 13571 : 2020/ISO 11171-2016 (1 Revision) |
Hydraulic Fluid Power — Calibration of Automatic Particle Counters for Liquids ( First Revision ) | 0 | Dec, 2024 | Buy | |
| 629 | IS 13572 : Part 2 : 2018/ISO 9928-2:2014 |
Cranes - Crane operating manual: Part 2 mobile cranes | 0 | Nov, 2023 | Buy | |
| 630 | IS 13583 : Part 1 : 1993/ISO 9926-1:1990 |
Cranes - Training of drivers: Part 1 general | 0 | Feb, 2023 | Buy | |
| 631 | IS 13583 : Part 3 : 2018/ISO 9926-3:2016 |
Cranes - Training of operators: Part 3 tower cranes | 0 | Nov, 2023 | Buy | |
| 632 | IS/ISO 13584 : Part 1 : 2001/ISO 13584 : Part 1 : 2001 |
Industrial automation systems and integration -- Parts library: Part 1 Overview and fundamental principles | 0 | Apr, 2021 | Buy | |
| 633 | IS 13610 : 2018/ISO 8979 : 2004 (1 Revision) |
Pliers and Nippers for Electronics - Nomenclature (First Revision) | 0 | Aug, 2024 | Buy | |
| 634 | IS/ISO 13611 : 2014 |
INTERPRETING GUIDELINES FOR COMMUNITY INTERPRETING | 0 | ---- | Buy | |
| 635 | IS 13614 : Part 2 : 1993/ISO 18869 : 2017 |
Hydraulic fluid power - Quick - Action couplings: Part 2 test methods | 0 | Sep, 2024 | Buy | |
| 636 | IS 13617 : 1992 |
Evaluation of pressure drop versus flow characteristics of pneumatic filters - Method of test | 0 | Sep, 2024 | Download | |
| 637 | IS 13618 : 1993 |
Minehaulages - Directrope (50 To 150 KW) - General requirements | 0 | Feb, 2025 | Download | |
| 638 | IS 13619 : 1993 |
Industrial steam and hot water boiler plants - Maintaining of log and summary sheets - Recommendations | 0 | Apr, 2019 | Download | |
| 639 | IS 13635 : 1993/ISO 2972 : 1979 |
Numerical control of machines - Symbols | 0 | May, 2023 | Buy | |
| 640 | IS 13636 : 1993 |
Pliers and nippers for electronics - Technical supply conditions | 0 | Aug, 2024 | Download | |
| 641 | IS 13637 : Part 1 : 1993/ISO 8826-1 : 1989 |
Technical drawings -- Rolling bearings: Part 1 General simplified representation | 0 | Feb, 2021 | Buy | |
| 642 | IS 13637 : Part 2 : 1999/ISO 8826-2 : 1994 |
Technical drawings -- Rolling bearings: Part 2 Detailed simplified representation | 0 | Feb, 2021 | Buy | |
| 643 | IS 13638 : Part 1 : 1993/ISO 9222-1 : 1989 |
Technical drawings -- Seals for dynamic application: Part 1 General simplified representation | 0 | Feb, 2021 | Buy | |
| 644 | IS 13638 : Part 2 : 1993/ISO 9222-2 : 1989 |
Technical drawings -- Seals for dynamic application: Part 2 Detailed simplified representation | 0 | Feb, 2021 | Buy | |
| 645 | IS 1364 : Part 5 : 2002/ISO 4036:1999 (4 Revision) |
Hexagon head bolts, screws and nuts of product grades A and B: Part 5 hexagon thin nuts - Product grade B (Unchamfered) (Size Range M 1.6t0 M 10) (Fourth Revision) | 0 | Apr, 2023 | Buy | |
| 646 | IS 1365 : 2022/ISO 19880-1 : 2020 (6 Revision) |
Slotted countersunk flat head screws Product grade A Fifth Revision of IS 1365 | 0 | ---- | Buy | |
| 647 | IS 13652 : 1993 |
Bulk Handling Equipment - Dumper - Supplier's Data Sheet | 0 | Mar, 2023 | Download | |
| 648 | IS 1367 : Part 1 : 2014/ISO 8992 : 2005 (4 Revision) |
Technical supply conditions for threaded steel fasteners: Part 1 general requirements for bolts, screws, studs and nuts (Fourth Revision) | 0 | Apr, 2024 | Buy | |
| 649 | IS 1367 : Part 2 : 2002/ISO 4759-1:2000 (3 Revision) |
Technical supply conditions for threaded steel fasteners: Part 2 tolerances for fasteners - Bolts, screws, studs and nuts - Product grades a, b and c (Third Revision) | 0 | Apr, 2023 | Buy | |
| 650 | IS 1367 : Part 7 : 1980 (2 Revision) |
Technical supply conditions for tHreadeD steel fasteners: Part 7 mechanical properties and test methods for nuts without specified proof loads (Second Revision) | 1 | Apr, 2023 | Buy | |
| 651 | IS 1367 : Part 9 : Sec 1 : 1993/ISO 6157-1 :1988 (3 Revision) |
Technical supply conditions for threaded steel fasteners: Part 9 surface discontinuities section 1 bolts, screws and studs for general applications (Third Revision) | 1 | Apr, 2024 | Buy | |
| 652 | IS 1367 : Part 9 : Sec 2 : 1993/ISO 6167-3 : 1988 (3 Revision) |
Technical supply conditions for threaded steel fasteners: Part 9 surface discontinuities section 2 bolts, screws and studs for special applications (Third Revision) | 1 | Apr, 2024 | Buy | |
| 653 | IS 1367 : Part 10 : 2002/ISO 6157-2:1995 (3 Revision) |
Technical supply conditions for threaded steel fasteners: Part 10 surface discontinuities - Nuts (Third Revision) | 0 | Apr, 2023 | Buy | |
| 654 | IS 1367 : Part 12 : 1981 (2 Revision) |
Technical supply conditions for threaded steel fasteners: Part 12 phosphate coatings on threaded fasteners (Second Revision) | 0 | Apr, 2024 | Buy | |
| 655 | IS 1367 : Part 14 : Sec 1 : 2023/11455 (5 Revision) |
Technical Supply Conditions for Threaded Steel Fasteners Part 14 Mechanical Properties of Corrosion-resistant Stainless Steel Fasteners Section 1 Bolts screws and studs with specified grades and property classes (Fifth Revision of IS 1367(Part 14 Sec 1)) | 0 | ---- | Buy | |
| 656 | IS 1367 : Part 16 : 2002/ISO 8991:1986 (3 Revision) |
Technical supply conditions for threaded steel fasteners: Part 16 designation system for fasteners (Third Revision) | 0 | Apr, 2023 | Buy | |
| 657 | IS 1367 : Part 18 : 1996 (3 Revision) |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 18 packaging (Third Revision) | 0 | Feb, 2021 | Download | |
| 658 | IS 1367 : Part 19 : 1997/ISO 3800 : 1993 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions: Part 19 axial load fatigue testing of bolts, screws and studs | 0 | Apr, 2024 | Buy | |
| 659 | IS 1367 : Part 20 : 1996/ISO 896-7 : 1992 |
Industrial fasteners - Threaded steel fasteners - Technical supply conditions - Mechanical properties: Part 20 torsional - Test and mlnimum torques for bolts and screws with nominal diameters 1 mm to 10 mm | 0 | Feb, 2021 | Buy | |
| 660 | IS 13673 : Part 2 : 2021 (1 Revision) |
Expression of Performance of Electrochemical Analyzers Part 2 pH Value ( First Revision ) | 0 | ---- | Download | |
| 661 | IS 13685 : Part 1 : 1993 |
Bulk handling equipment - Ship loader - Rail mounted - Data sheet for selection: Part 1 information to be supplied by purchaser | 0 | Mar, 2023 | Download | |
| 662 | IS 13685 : Part 2 : 1993 |
Bulk handling equipment - Ship loader - Rail mounted data sheet for selection: Part 2 information to be supplied by manufacturer/supplier | 0 | Mar, 2023 | Download | |
| 663 | IS 1369 : Part 1 : 1993/IS0 3508 : 1976 (3 Revision) |
Fasteners - Thread run - Outs and under - cuts: Part 1 dimensions for screw thread run - Outs for external ISO metric threads (Third Revision) | 0 | Apr, 2024 | Buy | |
| 664 | IS 1369 : Part 2 : 1993/ISO 4755 : 1983 (3 Revision) |
Fasteners - Thread run - Outs and undercuts: Part 2 dimensions for screw thread undercuts for external ISO metric threads (Third Revision ; | 0 | Apr, 2024 | Buy | |
| 665 | IS 13693 : 2023/ISO 11901-5 : 2021 (1 Revision) |
Determination of dehusked grains in rice by double staining method (First Revision of IS 13693) | 0 | ---- | Buy | |
| 666 | IS 1370 : 1993 (3 Revision) |
Transmission belting - Friction surface rubber belting specification (Third Revision) | 0 | Jul, 2024 | Download | |
| 667 | IS 13718 : Part 1 : 1993 |
Horology -- Watch straps: Part 1 Leather straps -- Specification | 0 | Jul, 2019 | Download | |
| 668 | IS 13718 : Part 2 : 1993 |
Horology -- Watch straps: Part 2 Stainless steel -- Specification | 0 | Jul, 2019 | Download | |
| 669 | IS 13718 : Part 3 : 2002 |
Horology -- Watch straps: Part 3 Solid link straps -- Specification | 0 | Mar, 2024 | Download | |
| 670 | IS 13732 : 2023/ISO 14839-2:2004 (2 Revision) |
Agricultural Tractors and Machinery General Purpose Quick-action Hydraulic Couplers | 0 | ---- | Buy | |
| 671 | IS 13741 : Part 1 : 1993 |
Carbide tips: Part 1 Carbide tips for single point tools -- Specification | 1 | Aug, 2024 | Download | |
| 672 | IS 13741 : Part 2 : 1993 |
Carbide tips: Part 2 Carbide tips for single point tools for light cutting operations -- Specification | 0 | Aug, 2024 | Download | |
| 673 | IS 13741 : Part 3 : 1993 |
Carbide tips: Part 3 Carbide tips for single point tool blanks for sliding head type automats -- Specification | 0 | Nov, 2018 | Download | |
| 674 | IS 13741 : Part 4 : 1993 |
Carbide tips: Part 4 Carbide tips for multi point tools -- Specification | 0 | Aug, 2024 | Download | |
| 675 | IS 13741 : Part 5 : 1993 |
Carbide tips: Part 5 Carbide tips for twist drills with point angle 115 degree C -- Specification | 1 | Nov, 2018 | Download | |
| 676 | IS 13741 : Part 6 : 1993 |
Carbide tips: Part 6 Carbide tips for single point threading tools -- Specification | 0 | Nov, 2018 | Download | |
| 677 | IS 13741 : Part 7 : 1993 |
Carbide tips: Part 7 Carbide tips for single point round nose turning tools -- Speciification | 0 | Nov, 2018 | Download | |
| 678 | IS 13742 : Part 1 : 1993 |
Carbide tipped single point tools ISO series: Part 1 Straight turning tool (ISO 1 ) -- Specification | 0 | Aug, 2024 | Download | |
| 679 | IS 13742 : Part 2 : 1993 |
Carbide tipped single point tools -- ISO series: Part 2 Cranked turning and facing tool (ISO 2) -- Specification | 1 | Dec, 2019 | Download | |
| 680 | IS 13742 : Part 3 : 1993 |
Carbide tipped single point tools -- ISO series: Part 3 Cranked finishing tool (ISO 3) -- Specification | 0 | Aug, 2024 | Download | |
| 681 | IS 13742 : Part 4 : 1993 |
Carbide tipped single point tools -- ISO series: Part 4 Broad turning tool (ISO 4) -- Specification | 0 | Aug, 2024 | Download | |
| 682 | IS 13742 : Part 5 : 1993 |
Carbide tips: Part 5 Carbide tips twist drills with point angle 115 degree -- Specification | 0 | Aug, 2024 | Download | |
| 683 | IS 13742 : Part 6 : 1993 |
Carbide tipped single point tool ISO series: Part 6 Cranked turning tool (ISO 6) -- Specification | 0 | Aug, 2024 | Download | |
| 684 | IS 13742 : Part 7 : 1993 |
Carbide tipped single point tools ISO series: Part 7 Parting off tool (ISO 7) -- Specification | 0 | Aug, 2024 | Download | |
| 685 | IS 13742 : Part 8 : 1993 |
Carbide tipped single point tools -- ISO series: Part 8 boring tool (ISO 8) -- Specification | 1 | Aug, 2024 | Download | |
| 686 | IS 13742 : Part 9 : 1993 |
Carbide tipped single point tools -- ISO series: Part 9 Boring and facing tool (ISO 9) -- Specification | 1 | Aug, 2024 | Download | |
| 687 | IS 13743 : Part 1 to 10 : 1997 |
Carbide tipped single point tools -- Ind series -- Specification | 0 | Aug, 2024 | Download | |
| 688 | IS 13744 : Part 1 to 8 : 1995 |
Carbide tipped single point planing tools -- specification | 1 | Jan, 2021 | Download | |
| 689 | IS 1375 : 2021/ISO 23247-2 : 2021 (2 Revision) |
Black Lead Pencils — Specification | 0 | ---- | Buy | |
| 690 | IS 13761 : 1993 |
Pliers and nippers for electronics - Single purpose nippers - End cutting nippers - Specification | 0 | Aug, 2024 | Download | |
| 691 | IS 13762 : 1993 |
Pliers and nippers for electronics - Single purpose nippers - Diagonal cutting nippers - Specification | 0 | Aug, 2024 | Download | |
| 692 | IS 13763 : 1993 |
Pliers and nippers for electronics - Single purpose nippers - Oblique cutting nippers - Specification | 0 | Aug, 2024 | Download | |
| 693 | IS 13764 : 1993 |
Pliers and nippers for electronics - Single purpose pliers - Round nose pliers - Specification | 0 | Aug, 2024 | Download | |
| 694 | IS 13765 : 1993 |
Pliers and nippers for electronics - Single purpose pliers - Flat nose pliers - Specification | 0 | Feb, 2025 | Download | |
| 695 | IS 13766 : 1993 |
Pliers and nippers for electronics - Single purpose pliers - Snipe nose pliers - Specification | 0 | Feb, 2025 | Download | |
| 696 | IS/ISO 13766 : Part 1 : 2018/ ISO 13766 -1:201 |
Earth-Moving and Building Construction Machinery - Electromagnetic Compatibility (EMC) of Machines with Internal Electrical Power Supply Part 1 General EMC Requirements Under Typical Electromagnetic Environmental Conditions | 0 | Jan, 2025 | Buy | |
| 697 | IS/ISO 13766 : Part 2 : 2018/ISO 13766 -2:2018 |
Earth-Moving and Building Construction Machinery - Electromagnetic Compatibility (EMC) of Machines with Internal Electrical Power Supply Part 2 Additional EMC Requirements for Functional Safety | 0 | Jan, 2025 | Buy | |
| 698 | IS 13768 : 2016 (2 Revision) |
Earth - Moving machinery - Laboratory evaluations of protective structures - Specifications for deflection - Limiting volume (Second Revision) | 0 | Feb, 2021 | Download | |
| 699 | IS 13776 : 1993/ISO 1080 : 1975 |
Machine tools morse taper shanks -- Cotter slots taper keys | 0 | Jun, 2023 | Buy | |
| 700 | IS 13834 : Part 1 : 2018/ISO 4301-1:2016 (1 Revision) |
Cranes - Classification: Part 1 general (First Revision) | 0 | Nov, 2023 | Buy | |
| 701 | IS 13834 : Part 4 : 1993/ISO 4301-4:1989 |
Cranes - Classification: Part 4 jib cranes | 0 | Feb, 2023 | Buy | |
| 702 | IS 13834 : Part 5 : 1993/ISO 4301-5:1991 |
Cranes - Classification: Part 5 overhead travelling and portal bridge cranes | 0 | Feb, 2023 | Buy | |
| 703 | IS 13851 : 1993 |
Storage and redrying of covered electrodes before use - Recommendations | 2 | Jan, 2019 | Download | |
| 704 | IS 13876 : Part 1 : 1993 |
Guide for marking system for fluid power components: Part 1 cylinders | 0 | Sep, 2024 | Download | |
| 705 | IS 13876 : Part 2 : 1993 |
Guide for marking system for fluid power components: Part 2 valves | 0 | Sep, 2024 | Download | |
| 706 | IS 13876 : Part 3 : 1993 |
Guide for marking system for fluid power components: Part 3 pumps and motors | 0 | Sep, 2024 | Download | |
| 707 | IS 13887 : 1993 |
Nippers - Lever assisted - Diagonal cutting - Specification | 0 | Feb, 2025 | Download | |
| 708 | IS 13888 : 1993 |
Nippers - Lever assisted - End cutting - Specification | 0 | Feb, 2025 | Download | |
| 709 | IS 13907 : 1994/ISO 7863 : 1984 |
Height setting micrometers and rising blocks - Specification | 0 | Feb, 2025 | Buy | |
| 710 | IS 13917 : 2003 (1 Revision) |
Stranded wire ropes for mine hoisting - Technical delivery requirements (First Revision) | 2 | Mar, 2019 | Download | |
| 711 | IS 13926 : 2005/ISO 6971 (1 Revision) |
Cranked - Link drag chains of welded construction, attachments and sprockets (First Revision) | 0 | Feb, 2021 | Buy | |
| 712 | IS 13927 : 2005/ISO 6972 (1 Revision) |
Cranked - Link mill chains of welded construction, attachments and sprockets (First Revision) | 0 | Feb, 2021 | Buy | |
| 713 | IS 13929 : 2021/ISO 230-10 : 2016 (1 Revision) |
STAINLESS STEEL DECKING PLATES FOR CANE MUD FILTERS SPECIFICATION | 0 | ---- | Buy | |
| 714 | IS 1393 : 1961 |
Code of practice for training and testing of oxy - Acetylene welders | 0 | Jan, 2019 | Download | |
| 715 | IS 13934 : 2018/ISO 4703:2001 (1 Revision) |
Test conditions for surface grinding machines with two columns - Machines for grinding slideways - Testing of the accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 716 | IS 13936 : 1994 |
Bulk handling equipment - Wheeled loaders - General requirements | 0 | Mar, 2023 | Download | |
| 717 | IS 13946 : Part 1 : 2022/8000-8 : 2015 (1 Revision) |
Determination of Rock Stress - Code of Practice: Part 1 Using the Hydraulic Fracturing Test and Hydraulic Tests on Pre-Existing Fractures Techniques (First Revision) | 0 | ---- | Buy | |
| 718 | IS 1395 : 1982 (3 Revision) |
Specification for low and medium alloy steel covered electrodes for manual metal arc welding (Third Revision | 1 | Jan, 2024 | Download | |
| 719 | IS 13951 : 1994 |
Heavy item lift platform for aircraft/airport operations - General requirements | 1 | Mar, 2022 | Download | |
| 720 | IS 13962 : 2018/ISO 10317 : 2008 (1 Revision) |
Rolling bearings - Tapered roller bearings - Designation system (First Revision) | 1 | May, 2023 | Buy | |
| 721 | IS 13979 : 1994 |
Method of calculation of efficiency of packaged boilers | 0 | Apr, 2024 | Download | |
| 722 | IS 13980 : 1995 |
Acceptance tests on industrial boilers - Code of practice | 0 | Apr, 2024 | Download | |
| 723 | IS/ISO 13985 : 2006/ISO 13985 : 2006 |
Liquid hydrogen - Land vehicle fuel tanks | 0 | Nov, 2021 | Buy | |
| 724 | IS 13989 : 1994 |
Bulk handling equipment - Bagging machines (Mechanical Type) - Design and construction - General requirements | 0 | Mar, 2023 | Download | |
| 725 | IS 1399 : 1959 |
Glossary of terms used in optical technology | 2 | Mar, 2022 | Download | |
| 726 | IS 13992 : 1994 |
Bulk handling equipment - Bagging machines (Electronic Type) - Design and construction - General requirements | 0 | Mar, 2023 | Download | |
| 727 | IS 13998 : 2021/3070-3 : 2007 (1 Revision) |
Multi-Point Diamond Impregnated Dressing Tools — Specification (First Revision of IS 13998 ) | 0 | ---- | Buy | |
| 728 | IS 1400 : 1960 |
Specification for optical glass | 1 | Mar, 2022 | Download | |
| 729 | IS/ISO 14046 : 2014/ISO 20816-3 : 2022 |
Environmental management Water footprint Principles requirements and guidelines | 0 | ---- | Buy | |
| 730 | IS 14150 : 2005/ISO 6264:1998 (1 Revision) |
Hydraulic fluid power - Pressure relief valves - Mounting surfaces (First Revision) | 0 | Dec, 2024 | Buy | |
| 731 | IS 14167 : 2019/ISO 10099:2001 (1 Revision) |
Pneumatic fluid power ? cylinders ? final examination and acceptance criteria (First Revision) | 0 | Aug, 2023 | Buy | |
| 732 | IS 14168 : 2017/ISO 6986:2013 |
Side and face milling (Slotting) cutters with indexable inserts -- Dimensions (first revision) | 0 | ---- | Buy | |
| 733 | IS 14169 : 2013 (1 Revision) |
Recommendations for type selection of feeders (First Revision) | 0 | Oct, 2018 | Download | |
| 734 | IS 14188 : 1994 |
Conveyor systems - Maintenance facilities - Design parameters | 0 | Oct, 2021 | Download | |
| 735 | IS 14206 : Part 1 : 1995 |
On - Sitenon - Mechanical jointing of plied textile reinforced rubber conveyor belting - Code of practice: Part 1 hot vulcanizing | 0 | Mar, 2023 | Download | |
| 736 | IS 14206 : Part 2 : 2001 |
On - Site non - Mechanical jointing of plied textile reinforced rubber conveyor belting - Code of practice: Part 2 cold vulcanizing | 0 | Mar, 2021 | Download | |
| 737 | IS 1423 : 2022 (3 Revision) |
Textiles � Cotton Gaberdine � Specification (third revision) | 0 | ---- | Download | |
| 738 | IS 14235 : 1995 |
Wiper seals used for fluid power application - Specification | 0 | Dec, 2024 | Download | |
| 739 | IS 14236 : 1995 |
Sealsfor reciprocating applications used in fluid power systems methods of test | 0 | Dec, 2024 | Download | |
| 740 | IS 14237 : 1995 |
U - Type seals with asymmetrical and symmetrical lips used for fluid power application - Specification | 0 | Dec, 2024 | Download | |
| 741 | IS 14260 : 1995/ISO 9385 |
Glass and glass - Ceramics - Knoop hardness test | 0 | Jun, 2023 | Buy | |
| 742 | IS 14261 : 1995 |
Transmission devices - V - Belts endless narrowv - Belts for industrial use - Specification | 0 | Feb, 2021 | Download | |
| 743 | IS 14271 : 1995 |
Engineering metrology - Dial snap gauges - Specification | 0 | Jan, 2020 | Download | |
| 744 | IS 14279 : 1995 |
Lubricating equipment - Barrel transfer pumps for grease specification | 0 | Sep, 2019 | Download | |
| 745 | IS 14285 : 1995 |
Transmission devices - Flexible couplings - Tyre type - Specification | 0 | Feb, 2021 | Download | |
| 746 | IS 14289 : 1995 (2 Revision) |
Manual tungsten insert gas arc welding of nickel and nickel alloys - Recommendations (Second Revision) | 0 | Mar, 2021 | Download | |
| 747 | IS/ISO 14298 : 2021/ISO 15792-3:2011 (1 Revision) |
Graphic Technology - Management of Security Printing Processes (First Revision) | 0 | ---- | Buy | |
| 748 | IS 1433 : 1990 (2 Revision) |
Beam scales - Specification (Second Revision) | 0 | Mar, 2022 | Download | |
| 749 | IS 14338 : 1996 |
Basic and design profile of screw threads for watch bezel and back covers | 0 | Mar, 2024 | Download | |
| 750 | IS 14339 : 1996 |
Horology -- Watch bezel and back cover gauges -- Technical supply conditions -- General | 0 | Mar, 2024 | Download | |
| 751 | IS 1434 : 1959 |
Specification for counter machines | 0 | Mar, 2022 | Download | |
| 752 | IS 14347 : 1996 |
Plummer block housings - Specification | 0 | Jan, 2023 | Download | |
| 753 | IS 14352 : 1996 |
Miners Safety Goggles | 0 | Feb, 2022 | Download | |
| 754 | IS 14355 : 2022/ISO 17450-3:2016 (1 Revision) |
Zinc dust pigment for paints - Specification (First Revision) | 0 | ---- | Buy | |
| 755 | IS 14365 : 1996 |
Horology -- Gauges for watch bezel and back covers -- Dimensions and tolerances | 0 | Mar, 2024 | Download | |
| 756 | IS 14368 : 1996 |
Portable Pneumatic weldflux scalers - Specification | 0 | Jun, 2021 | Download | |
| 757 | IS 14369 : 1996 |
Abrasive belts - Designation, dimensions and tolerances and selection of width/length combinations | 0 | Oct, 2020 | Download | |
| 758 | IS 14370 : 1996 |
Determination of magnetic matter in abrasives - Test methods | 1 | Oct, 2020 | Download | |
| 759 | IS 14386 : 1996 |
Belt conveyors - Travelling tripper - Motorised - For belt widths 650 mm to 1600 mm - Dimensions | 0 | Oct, 2021 | Download | |
| 760 | IS 14391 : 1997 |
Gas operated rifle (For shooting Pellets) - Specification | 0 | Mar, 2018 | Download | |
| 761 | IS/ISO 14397 : Part 1 : 2007/ISO 14397-1:2007 |
Earth-Moving Machinery - Loaders and Backhoe Loaders Part 1 Calculation of Rated Operating Capacity and Test Method for Verifying Calculated Tipping Load | 0 | ---- | Buy | |
| 762 | IS/ISO 14401 : Part 2 : 2009/ISO 14401 : Part 2 : 2009 |
Earth - Moving machinery - Field of vision of surveillance and rear - View mirrors: Part 2 performance criteria | 0 | ---- | Buy | |
| 763 | IS 14412 : 1996 |
Technical drawings -- Indication for revision of drawings | 0 | Mar, 2023 | Download | |
| 764 | IS 14416 : 1996 |
Bulk handling equipment - Boom type bucket wheel reclaimer - Rail mounted - Design, manufacture and erection - Code of practice | 0 | Mar, 2022 | Download | |
| 765 | IS 14417 : 1996 |
Bulk handling equipment - Single boom slewable stacker - Rail mounted - Design, manufacture and erection - Code of practice | 0 | Jan, 2025 | Download | |
| 766 | IS 14418 : 1996 |
Bulk handling equipment - Ship loader - Rail mounted - Design, manufacture and erection - Code of practice | 0 | Mar, 2022 | Download | |
| 767 | IS 14419 : 1996 |
Acceptance standards for radiographic examination of welds for ships - Recommendations | 0 | Jan, 2019 | Download | |
| 768 | IS 14422 : 1997 |
Arms and ammunition - Rifle 5.5 mm (0.22), bolt operated - Specification | 0 | Mar, 2018 | Download | |
| 769 | IS 14433 : 2022 (2 Revision) |
INFANT MILK SUBSTITUTES - SPECIFICATION (Second Revision of IS 14433) | 1 | ---- | Download | |
| 770 | IS 14439 : Part 1 : 1997 |
Legal metrology - Gas volume meters: Part 1 general requirements | 1 | Apr, 2024 | Download | |
| 771 | IS 14439 : Part 2 : 1998 |
Leagal metrology - Gas volume meters: Part 2 diaphagm gas meters | 3 | Nov, 2019 | Download | |
| 772 | IS 1444 : 1989 (2 Revision) |
Engineers Pattern Drawing Boards - Specification (Second Revision) | 0 | Mar, 2021 | Download | |
| 773 | IS 14467 : 2018/ISO 4302:2016 (1 Revision) |
Cranes - Wind load assessment (First Revision) | 0 | Nov, 2023 | Buy | |
| 774 | IS 14468 : 1997/ISO 4304:1987 |
Cranes other than mobile and floating cranes - General requirements for stability | 0 | Feb, 2023 | Buy | |
| 775 | IS 14469 : 2018/ISO 4305:2014 (1 Revision) |
Mobile cranes - Determination of stability (First Revision) | 1 | ---- | Buy | |
| 776 | IS 14471 : 1997/ISO 7363:1986 |
Cranes and lifting appliances - Technical characteristics and acceptance documents | 0 | Feb, 2023 | Buy | |
| 777 | IS 14473 : Part 1 : 2016/ISO 9927-1 |
Cranes - Inspections: Part 1 general | 0 | Mar, 2021 | Buy | |
| 778 | IS 14474 : Part 1 : 1997/ISO 11662-1:1995 |
Mobile cranes - Experimental determination of crane performance: Part 1 tipping loads and radii | 0 | Feb, 2023 | Buy | |
| 779 | IS 14478 : 1997 |
Plain bearings - Thick - Walled bushes, plain and flange type, full - Round (without any joint or slit) - Specification | 0 | Aug, 2023 | Download | |
| 780 | IS 1448 : Part 145 : 2022/ISO 15792-2:2020 (1 Revision) |
Methods of test for petroleum and its products Part 145 Determination of sodium nickel and vanadium in fuel oils and crude oils by atomic absorption spectroscopy (first revision) | 0 | ---- | Buy | |
| 781 | IS 14480 : 2006 |
Side - Discharge loaders for underground coal mines - Safety requirements, operation and maintenance - Code of practice (First Revision) | 0 | Feb, 2022 | Download | |
| 782 | IS 14497 : 1997 |
Capacity rating and dimensions for trimming presses | 0 | Aug, 2024 | Download | |
| 783 | IS 14499 : 2021/ISO 20140-5 : 2017 (1 Revision) |
Strontium chromate for paints - Specification (First Revision) | 0 | ---- | Buy | |
| 784 | IS 14528 : 1998 |
Tube end straight reducers for oil - Hydraulic couplings | 0 | Sep, 2024 | Download | |
| 785 | IS 14530 : Part 1 : 2019/ISO 10218-1 : 2011 |
Robots and robotic devices -- Safety requirements for industrial robots: Part 1 Robots (first revision) | 0 | ---- | Buy | |
| 786 | IS 14530 : Part 2 : 2019/ISO 10218-2 : 2011 |
Robots and robotic devices -- Safety requirements for industrial robots: Part 2 Robot systems and integration (first revision) | 0 | ---- | Buy | |
| 787 | IS 14531 : 2005/ISO 9946 : 1999 |
Manipulating industrial robots -- Presentation of characteristics (first revision) | 0 | Feb, 2020 | Buy | |
| 788 | IS 14532 : 1998/ISO 3936 : 1993 |
Reduction sleeves with tenon drive with external and internal 7/24 taper -- Dimensions | 0 | Jun, 2023 | Buy | |
| 789 | IS 14533 : 2005/ISO 9283 : 1998 |
Manipulating industrial robots -- Performance criteria and related test methods (first revision) | 0 | Feb, 2020 | Buy | |
| 790 | IS 14558 : 1998/ISO/DIS 14882 : 1996 |
Horology -- Primary batteries -- Watch batteries | 0 | Jul, 2019 | Buy | |
| 791 | IS 14560 : Part 1 : 1998 |
Horology -- Mineral and sapphire glass for wrist watch cases: Part 1 Dimensions, material and test procedures -- Specification | 0 | Jul, 2019 | Download | |
| 792 | IS 14560 : Part 2 : 1998 |
Horology -- Mineral and sapphire glass for wrist watch cases: Part 2 Gasket dimensions, material and test procedures -- Specification | 0 | Jul, 2019 | Download | |
| 793 | IS 14585 : 1998 |
Spline hobs -- Involute sided -- Specification | 0 | Aug, 2024 | Download | |
| 794 | IS 14586 : 1998 |
Serration hobs -- Straight sided -- Specification | 0 | Aug, 2024 | Download | |
| 795 | IS 14601 : 1998 (1 Revision) |
Method for presenting performance data for hydraulic pumps | 0 | Dec, 2024 | Download | |
| 796 | IS 14602 : 1999 |
Installation methods of positive displacement hydraulic pumps and motors - Guidelines | 1 | Sep, 2024 | Download | |
| 797 | IS 14604 : 1998 |
Proforma for purchase Specification for positive displacement pumps and motors used in oil hydraulic systems | 0 | Sep, 2024 | Download | |
| 798 | IS 14633 : 1999 |
Blackboards for class rooms - Specification | 0 | Mar, 2019 | Download | |
| 799 | IS 14663 : 2018/IS0 9787 : 1990 (1 Revision) |
Robots and robotic devices -- Coordinate systems and motion nomenclatures (first revision) | 0 | Jan, 2023 | Buy | |
| 800 | IS 14693 : 1999 |
2 - Jaw and 3 - Jaw power operated wedge type chucks - Specification | 1 | Mar, 2022 | Download | |
| 801 | IS 14694 : 1999 |
2-Jaw and 3-Jaw Power Operated High Speed Lathe Chucks With Through Bore - Specification | 1 | Mar, 2022 | Download | |
| 802 | IS 14696 : 2000 |
Transmission steel roller chains and chain wheels for oil field applications - Specification | 0 | Feb, 2021 | Download | |
| 803 | IS 14704 : 1999 |
Bulk handling equipment - Bag stacker - Cum - Loader/unloader - Portable - Design and construction - General requirements | 0 | Feb, 2023 | Download | |
| 804 | IS 14722 : 2016/ISO 10135 : 2007 |
Geometrical product specifications (GPS) -- Drawing indications for moulded parts in technical product documentation (TPD) (First Revision) | 0 | Mar, 2023 | Buy | |
| 805 | IS 14725 : 1999 |
2 - Jaw and 3 - Jaw hand operated heavy duty cam type self centering chucks - Specification | 1 | Mar, 2022 | Download | |
| 806 | IS 14732 : 2000/ISO 6897 : 1984 |
Guidelines for the evaluation of the response of occupants of fixed structures, especially buildings and off - Shore structures, to low - Frequency horizontal motion (0.063 To 1 Hz) | 0 | Dec, 2024 | Buy | |
| 807 | IS 14736 : Part 1 : 2017/ISO 7626-1 : 2011 (1 Revision) |
Mechanical vibration and shock - Experimental determination of mechanical mobility: Part 1 basic terms and definitions, and transducer specifications (First Revision) | 0 | Sep, 2021 | Buy | |
| 808 | IS 14736 : Part 2 : 2018/ISO 7626-2 : 2015 (1 Revision) |
Mechanical Vibration and Shock - Experimental Determination of Mechanical Mobility Part 2 Measurements Using Single - Point Translation Excitation with an Attached Vibration Exciter ( First Revision) | 0 | Sep, 2022 | Buy | |
| 809 | IS 14757 : 2000 |
RECOMMENDATIONS ON PREFERRED CAPACITIES AND DIMENSIONS FOR STRAIGHT-SIDED COLUMN TYPE AND FOUR PILLAR TYPE HYDRAULIC PRESSES | 0 | Mar, 2021 | Download | |
| 810 | IS 14758 : 2000 |
Forging machine tools - Glossary of terms | 0 | Mar, 2021 | Download | |
| 811 | IS 14775 : 2000/ISO 10898 : 1992 |
Spot drills -- Dimensions | 0 | Jan, 2021 | Buy | |
| 812 | IS 14776 : Part 1 : 2000/ISO/TR 10314-1 : 1990 |
Industrial automation -- Shop floor production: Part 1 Reference model for standardization and a methodology for identification of requirements | 0 | Feb, 2020 | Buy | |
| 813 | IS 14776 : Part 2 : 2000/lSO/TR 10314-2 : 1991 |
Industrial automation -- Shop floor production: Part 2 Application of the reference model for standardization and methodology | 0 | Feb, 2020 | Buy | |
| 814 | IS 14778 : 2000 |
Ortable methanometer (Interferometer Type) - Specification | 0 | Sep, 2020 | Download | |
| 815 | IS 14784 : 2000 |
Fireworks signal flares - Specification | 0 | Apr, 2021 | Download | |
| 816 | IS 1480 : 1970 (1 Revision) |
Specification metric scales for general purposes (First Revision) | 2 | Mar, 2021 | Download | |
| 817 | IS 14802 : Part 1 : 2000/ISO 4384-1 : 2019 |
Plain bearings - Hardness testing of bearing metals: Part 1 compound materials | 0 | May, 2020 | Buy | |
| 818 | IS 14806 : 2021/ISO 20140-1 : 2019 (1 Revision) |
Azospirillum Inoculants - Specification (First Revision) | 1 | ---- | Buy | |
| 819 | IS 14817 : Part 3 : 2017/IS0 10816-3 : 1995 (1 Revision) |
Mechanical vibration - Evaluation of machine vibration by measurements on non - Rotating parts: Part 3 industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ (First Revision) | 0 | Jan, 2022 | Buy | |
| 820 | IS 14817 : Part 6 : 2004/IS0 10816-6 : 1995 |
Mechanical vibration - Evaluation of machine vibration by measurements on non - Rotating parts: Part 6 reciprocating machines with power rating above 100 kW | 1 | Sep, 2022 | Buy | |
| 821 | IS 14820 : Part 3 : 2016/ISO/TR 11146-3 : 2004 |
Lasers and laser - Related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios: Part 3 intrinsic and geometrical laser beam classification, propagation and details of test methods (First Revision) | 0 | Mar, 2022 | Buy | |
| 822 | IS 14848 : 2000/ISO 3662 : 1976 |
Hydraulic fluid power - Pumps and motors - Geometric displacements | 0 | Dec, 2024 | Buy | |
| 823 | IS 14849 : Part 1 : 2017/ISO 4392-1 : 2002 (1 Revision) |
Hydraulic fluid power - Determination of characteristics of motors: Part 1 at constant low speed and at constant pressure (First Revision) | 0 | Sep, 2024 | Buy | |
| 824 | IS 14849 : Part 2 : 2018/ISO 4392-2 (1 Revision) |
Hydraulic fluid power - Determination of characteristics of motors: Part 2 startability (First Revision) | 0 | Sep, 2024 | Buy | |
| 825 | IS 14849 : Part 3 : 2005/ISO 4392-3:1993 |
Hydraulic fluid power - Determination of characteristics of motors: Part 3 at constant flow and at constant torque | 0 | Dec, 2024 | Buy | |
| 826 | IS 14859 : 2000 |
Specification for hindi (Devnagri) stencil templates and pen tips | 0 | Mar, 2021 | Download | |
| 827 | IS 14863 : 2018/ISO 5608 : 2012 (1 Revision) |
Turning and copying tool holders and cartridges for indexable inserts -- Designation (first revision) | 0 | Aug, 2024 | Buy | |
| 828 | IS 14865 : 2001/ISO 5609 : 1998 |
Boring bars for indexable inserts -- Dimensions | 0 | Jan, 2021 | Buy | |
| 829 | IS 14867 : 2000/ISO 5611 : 1995 |
Cartridges, type A, for indexable inserts -- Dimensions | 0 | Jan, 2021 | Buy | |
| 830 | IS 14867 : Part 2 : 2019/ISO 5611-4 |
Cartridges, type A, for indexable inserts: Part 2 Style F | 0 | Jun, 2023 | Buy | |
| 831 | IS 14867 : Part 3 : 2019/ISO 5611-3 : 2015 |
Cartridges, type A, for indexable inserts: Part 3 Style G | 0 | Jun, 2023 | Buy | |
| 832 | IS 14867 : Part 4 : 2019/ISO 5611-4 |
Cartridges, type A, for indexable inserts: Part 4 Style J | 0 | Jun, 2023 | Buy | |
| 833 | IS 14867 : Part 5 : 2019/ISO 5611-5 : 2015 |
Cartridges, type A, for indexable inserts: Part 5 Style K | 0 | Jun, 2023 | Buy | |
| 834 | IS 14867 : Part 6 : 2019/ISO 5611-6 : 2015 |
Cartridges, type A, for indexable inserts: Part 6 Style l | 0 | Jun, 2023 | Buy | |
| 835 | IS 14867 : Part 7 : 2019/ISO 5611-7 : 2015 |
Cartridges, type A, for indexable inserts: Part 7 Style R | 0 | Jun, 2023 | Buy | |
| 836 | IS 14867 : Part 8 : 2019/ISO 5611-8 : 2015 |
Cartridges, type A, for indexable inserts: Part 8 Style S | 0 | Jun, 2023 | Buy | |
| 837 | IS 14867 : Part 10 : 2019/ISO 5611-10 : 2015 |
Cartridges, type A, for indexable inserts: Part 10 Style U | 0 | Jun, 2023 | Buy | |
| 838 | IS 14867 : Part 11 : 2019/ISO 5611-11 : 2015 |
Cartridges, type A, for indexable inserts: Part 11 Style W | 0 | Jun, 2023 | Buy | |
| 839 | IS 14867 : Part 12 : 2019/ISO 5611-12 : 2015 |
Cartridges, type A, for indexable inserts: Part 12 Style Y | 0 | Jun, 2023 | Buy | |
| 840 | IS 14872 : Part 1 : 2014/ISO 3408-1 : 2006 (1 Revision) |
Ball screws: Part 1 vocabulary and designation (First Revision) | 0 | Sep, 2024 | Buy | |
| 841 | IS 14872 : Part 3 : 2013/ISO 3408-3 : 2006 (1 Revision) |
Ball screws: Part 3 acceptance conditions and acceptance tests (First Revision) | 0 | May, 2023 | Buy | |
| 842 | IS 14875 : 2000 |
Compressed air filters - Evaluation parameters | 0 | Sep, 2024 | Download | |
| 843 | IS 14876 : 2020/ISO 6301-1:2017 (1 Revision) |
Pneumatic Fluid Power ? Compressed-air lubricators Part 1 Main Characteristics to be Included in Supplier’s Literature and Product-marking Requirements ( First Revision ) | 0 | Dec, 2024 | Buy | |
| 844 | IS 14877 : Part 1 : 2000 |
Hydraulic presses - Straight sided column/C - Frame type: Part 1 test chart for geometrical accuracy | 0 | Mar, 2021 | Download | |
| 845 | IS 14877 : Part 2 : 2002 |
Hydraulic presses - Straight sided column/C - Frame type: Part 2 test chart for technical (Performance) evaluation of presses and press brakes | 0 | Aug, 2024 | Download | |
| 846 | IS 14878 : 2000 |
Test chart for plate bending machines | 0 | Mar, 2021 | Download | |
| 847 | IS 14882 : 2000/1SO 10112:1991 |
Damping materials - Graphical presentation of the complex modulus | 0 | Feb, 2021 | Buy | |
| 848 | IS 14893 : 2021/ISO 17916 : 2016 (1 Revision) |
Low strain non-destructive integrity testing of piles - Guidelines (first revision) | 0 | ---- | Buy | |
| 849 | IS 14899 : 2014 (1 Revision) |
Liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision) | 0 | Apr, 2025 | Download | |
| 850 | IS 14907 : 2001/ISO 10227:1996 |
Human/human surrogate impact (Single Shock) testing and evaluation - Guidance on technical aspects | 0 | Feb, 2021 | Buy | |
| 851 | IS 14910 : 2001/ISO 8727:1997 |
Mechanical vibration and shock - Human exposure - Biodynamic coordinate systems | 1 | Feb, 2021 | Buy | |
| 852 | IS 14916 : 2016/ISO 10068: 2012 (1 Revision) |
Mechanical Vibration and Shock — Mechanical Impedance of the Human Hand-Arm System at the Driving Point ( First Revision ) | 0 | Feb, 2021 | Buy | |
| 853 | IS 1492 : 1970 (1 Revision) |
Specification for metric surveying chains (First Revision) | 2 | Mar, 2019 | Download | |
| 854 | IS 14929 : 2022/ISO 16610-29 : 2020 (1 Revision) |
Mixed polyolefin fibre ropes (first revision) | 2 | ---- | Buy | |
| 855 | IS 1493 : Part 7 : 2022/ISO 19085-6 : 2017 (2 Revision) |
Methods of chemical analysis of iron ores – Part 7 Determination of Lead Content — Flame Atomic Absorption Spectrometric Method (Second Revision) | 0 | ---- | Buy | |
| 856 | IS 1493 : Part 10 : 2022/ISO 128-3:2022 |
Methods of chemical analysis of iron ores – Part 10 Determination of Zinc Content — Flame Atomic Absorption Spectrometric Method | 0 | ---- | Buy | |
| 857 | IS 14931 : 2001 |
Fireworks wheel - Specification | 0 | Apr, 2021 | Download | |
| 858 | IS 14962 : Part 2 : 2001/ISO 965-2:1998 |
ISO general purpose metric screw threads - Tolerances: Part 2 limits of sizes for general purpose external and internal screw threads - Medium quality | 1 | Apr, 2023 | Buy | |
| 859 | IS 14962 : Part 5 : 2001/ISO 965-5:1998 |
ISO general purpose metric screw threads - Tolerances: Part 5 limits of sizes for internal screw threads to mate with hot - Dip galvanized external screw threads with maximum size of tolerance position H before galvanizing | 1 | Apr, 2023 | Buy | |
| 860 | IS/ISO 14963 : 2003/ISO 14963 : 2003 |
Mechanical vibration and shock - Guidelines for dynamic tests and investigations on bridges and viaducts | 0 | Dec, 2024 | Buy | |
| 861 | IS 14964 : 2001/ISO 12844 |
Raw optical glass - Grindability with diamond pellets - Test method and classification | 0 | Mar, 2022 | Buy | |
| 862 | IS 14979 : 2001/ISO 9996:1996 |
Mechanical vibration and shocks - Disturbance to human activity and performance - Classification | 0 | Feb, 2021 | Buy | |
| 863 | IS/ISO 14990 : Part 1 : 2016/ISO 14990-1:2016 |
Earth-Moving Machinery - Electrical Safety of Machines Utilizing Electric Drives and Related Components and Systems Part 1 General Requirements | 0 | ---- | Buy | |
| 864 | IS/ISO 14990 : Part 2 : 2016/ISO 14990-2:2016 |
Earth-Moving Machinery - Electrical Safety of Machines Utilizing Electric Drives and Related Components and Systems Part 2 Particular Requirements for Externally-Powered Machines | 0 | ---- | Buy | |
| 865 | IS/ISO 14990 : Part 3 : 2016/ISO 14990-3:2016 |
Earth-Moving Machinery - Electrical Safety of Machines Utilizing Electric Drives and Related Components and Systems Part 3 Particular Requirements for Self-Powered Machines | 0 | ---- | Buy | |
| 866 | IS 14992 : 2012/ISO 3919 : 2005 |
Coated abrasives - Flap wheels with shaft (First Revision) | 0 | Sep, 2024 | Buy | |
| 867 | IS/ISO 1501 : 2009/ISO 1501:2009 |
ISO miniature screw threads | 1 | Apr, 2024 | Buy | |
| 868 | IS 15021 : Part 1 : 2001/ISO 5456-1 : 1996 |
Technical drawings -- Projection methods: Part 1 Synopsis | 0 | Mar, 2023 | Buy | |
| 869 | IS 15021 : Part 2 : 2001/ISO 5456-2 : 1996 |
Technical drawings -- Projection methods: Part 2 Orthographic representations | 0 | Mar, 2023 | Buy | |
| 870 | IS 15021 : Part 3 : 2001/ISO 5456-3 : 1996 |
Technical drawings -- Projection methods: Part 3 Axonometric representations | 0 | Mar, 2023 | Buy | |
| 871 | IS 15021 : Part 4 : 2001/ISO 5456-4 : 1996 |
Technical drawings -- Projection methods: Part 4 Central projection | 0 | Feb, 2021 | Buy | |
| 872 | IS 15023 : Part 1 : 2001/ISO 5845-1 : 1995 |
Technical drawings -- Simplified representation of the assembly of parts with fasteners: Part 1 General principles | 0 | Mar, 2023 | Buy | |
| 873 | IS 15023 : Part 2 : 2001/ISO 5845-2 : 1995 |
Technical drawings -- Simplified representation of the assembly of parts with fasteners: Part 2 Rivets for aerospace equipment | 0 | Mar, 2023 | Buy | |
| 874 | IS 15024 : 2011/ISO 11442 : 2006 (1 Revision) |
Technical product documentation -- Document management (First Revision) | 0 | Mar, 2022 | Buy | |
| 875 | IS 15034 : 2001/lSO~R 13309:1995 |
Manipulating industrial robots -- Informative guide on test equipment and metrology methods of operation for robot performance evaluation in accordance with is 14533:1998 | 0 | Jan, 2023 | Buy | |
| 876 | IS 15042 : Part 1 : 2021/ISO 6779 : 2019 (3 Revision) |
Financial Services - Personal Identification Number (PIN) Management and Security Part 1: Basic Principal and Requirements for Pins in Card Based Systems (Third Revision) | 0 | Mar, 2022 | Buy | |
| 877 | IS 15044 : 2019/ISO 10579 : 2010 (1 Revision) |
Geometrical Product Specifications (GPS) -- Dimensioning and Tolerancing -- Non-rigid parts (First Revision) | 0 | Aug, 2023 | Buy | |
| 878 | IS 15045 : Part 3 : 2001/ISO 5599-3:1990 |
Pneumatic fluid power - Five port directional control valves: Part 3 code system for communication of valve functions | 0 | Sep, 2024 | Buy | |
| 879 | IS 15064 : 2002 |
Plastic movement holders for wrist watch cases -- Specification | 0 | Mar, 2024 | Download | |
| 880 | IS 15065 : 2001 |
Carbide tips for use in integral stems for percussive drillings - Specification | 0 | Jun, 2021 | Download | |
| 881 | IS 15066 : 2001 |
Coated abrasives - Flap wheel with incorporated flanges or separate flanges - - designation and dimensions | 0 | Oct, 2020 | Download | |
| 882 | IS 15067 : 2001 |
End mills with brazed helical hard metal tips -- Dimensions | 0 | Aug, 2024 | Download | |
| 883 | IS 15073 : Part 1 : 2002 |
Packaging of electric detonators - Specification: Part 1 wooden cases | 0 | Sep, 2023 | Download | |
| 884 | IS 15073 : Part 2 : 2008 |
Packaging of electric detonator: Part 2 corrugated fibreboard cases | 0 | Sep, 2023 | Download | |
| 885 | IS 15074 : Part 1 : 2002 |
Packaging of non - Electric detonators - Specification: Part 1 wooden cases | 0 | Sep, 2023 | Download | |
| 886 | IS 15083 : 2001 |
Water swivel for use with diamond core drilling - Requirements | 0 | Jan, 2022 | Download | |
| 887 | IS 15084 : 2002 |
Spring balance - Tension type (For Use In Schools) - Specification | 0 | Oct, 2022 | Download | |
| 888 | IS 15085 : 2001 |
Decimeter cube (For Use In Schools) - Specification | 0 | Oct, 2022 | Download | |
| 889 | IS 15085 : 2001 |
Decimeter Cubes for Use in Schools | 0 | Oct, 2022 | Download | |
| 890 | IS 15091 : Part 1 : 2002/ISO 9361-1 : 2014 |
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 1 Dimensions of inserts without fixing hole | 0 | Nov, 2018 | Buy | |
| 891 | IS 15091 : Part 2 : 2004/ISO 9361-2:2011 |
Indexable inserts for cutting tools -- Ceramic inserts with rounded corners: Part 2 dimensions of inserts with cylindrical fixing hole | 0 | Jan, 2021 | Buy | |
| 892 | IS 15093 : 2002/ISO 9431 : 1990 |
Construction drawings -- Spaces for drawing and for text, and title blocks on drawing sheets | 0 | Mar, 2023 | Buy | |
| 893 | IS 15094 : 2002/ISO 10910 : 1995 |
Classification and designation of approximate chip control zones for indexable inserts with chip breakers | 0 | Jun, 2023 | Buy | |
| 894 | IS 15097 : 2002/ISO 6150:2018 |
Pneumatic fluid power - Cylindrical quick - Action couplings for maximum working pressures of 10 bar, 16 bar and 25 bar (1 Mpa, 1.6 Mpa And 2.5 Mpa) - Plug connecting dimensions, Specifications, application guidelines and testing | 0 | Sep, 2024 | Buy | |
| 895 | IS 15100 : 2018 (1 Revision) |
Multi - Function valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use - Specification (First Revision) | 0 | Mar, 2023 | Download | |
| 896 | IS 15126 : 2002/ISO 13443 |
Natural gas - Standard reference conditions | 0 | May, 2023 | Buy | |
| 897 | IS 15129 : 2002/ISO 14111 |
Natural gas - Guidelines to traceability in analysis | 0 | Jul, 2023 | Buy | |
| 898 | IS 15130 : Part 4 : 2002/ISO 6974-4 |
Natural Gas - Determination of Composition with Defined Uncertainty by Gas Chromatography - Part 4 : Determination of Nitrogen, Carbon Dioxide and C1 to C5 and C6+ Hydrocarbons for a Laboratory and On-line Measuring System Using Two Columns | 0 | Jul, 2023 | Buy | |
| 899 | IS 15143 : 2002 |
Conveyor belting of elastomeric and steel cord construction for underground mines and such other hazardous applications - Specification | 0 | Mar, 2023 | Download | |
| 900 | IS 15144 : 2002 |
Indexable hardmetal (Carbide) inserts with rounded corners with partly cylindrical fixing hole -- Dimensions of inserts with 7° normal clearance for light alloy and plastic components turning | 0 | Aug, 2024 | Download | |
| 901 | IS 15145 : 2002 |
Round kelly for direct rotary water well drilling rig - Requirements | 0 | May, 2019 | Download | |
| 902 | IS 15146 : 2002/ISO 155 : 2019 |
Belt drives - Pulleys - Limiting values for adjustment of centres | 0 | Mar, 2023 | Buy | |
| 903 | IS 15147 : 2015/ISO 254 (1 Revision) |
Belt drives - Pulleys - Quality, finish and balance (First Revision) | 0 | Jan, 2020 | Buy | |
| 904 | IS 15148 : 2015/ISO 1813 (1 Revision) |
Belt drives - V - Ribbed belts, joined V - Belts and V - Belts including wide section belts and hexagonal belts - Electrical conductivity of antistatic belts: characteristics and methods of test (First Revision) | 0 | Jan, 2025 | Buy | |
| 905 | IS 15149 : 2002/ISO 9981 : 2020 |
Belt drives - Pulleys and V - Ribbed belts for the automotive industry - Pk profile : dimensions | 0 | Mar, 2023 | Buy | |
| 906 | IS 15151 : 2002/ISO 9982 : 2021 |
Belt drives - Pulleys and V - Ribbed belts for industrial applications - PH, PJ, PK, PL and PM profiles : dimensions | 0 | Mar, 2023 | Buy | |
| 907 | IS 15170 : 2017/ISO/TR 10949 : 2002 (1 Revision) |
Hydraulic fluid power - Component cleanliness - Guidelines for achieving and controlling cleanliness of components from manufacturer to installation (First Revision) | 0 | Sep, 2024 | Buy | |
| 908 | IS 15179 : 2002/ISO 6072:2011 |
Hydraulic fluid power - Compatibility between elastomeric materials and fluids | 0 | Aug, 2023 | Buy | |
| 909 | IS 1518 : 1980 (1 Revision) |
Method for gauging of petroleum and liquid petroleum products (First Revision) | 0 | Mar, 2022 | Download | |
| 910 | IS/ISO 15189 : 2022 (3 Revision) |
Medical Laboratories Requirements for Quality and Competence Third Revision | 0 | ---- | Buy | |
| 911 | IS 15190 : Part 1 : 2002 |
Acetylene pipelines - Code of practice: Part 1 for pressures up to 155 kPa (G) | 0 | Oct, 2022 | Download | |
| 912 | IS 15190 : Part 2 : 2002 |
Acetylene pipelines - Code of practice: Part 2 for pressures from 155 kPa (G) to 2550 kPa (G) | 0 | Oct, 2022 | Download | |
| 913 | IS 15191 : 2002 |
Forged steel components for use with grade T (8) chain and chain slings - Specification | 0 | Jan, 2023 | Download | |
| 914 | IS 15197 : 2002 |
Kerosene heating lamp for use in school and college laboratories - Specification | 0 | Oct, 2022 | Download | |
| 915 | IS 15216 : 2002 |
Balloons - Meteorological | 0 | Feb, 2019 | Download | |
| 916 | IS 15242 : 2002 |
Magnets (For Use In Schools And Colleges) - Specification | 0 | Oct, 2022 | Download | |
| 917 | IS 15243 : 2002 |
Velocity scale set for meteorological purposes | 0 | Feb, 2019 | Download | |
| 918 | IS 15246 : 2002/ISO 9524 : 1993 |
Machine tools - Front faces of spindle holders for machining centres - Functional dimensions | 0 | May, 2023 | Buy | |
| 919 | IS 15247 : 2002/ISO 9270 : 1992 |
7/24 tapers for tool shanks for automatic changing - Tapers for spindle noses | 0 | May, 2023 | Buy | |
| 920 | IS 15248 : Part 1 : 2013/ISO 3442-1 : 2005 |
Machine tools - Dimensions and geometric tests for self - Centring chucks with two - Piece jaws: Part 1 manually operated chucks with tongue and groove type jaws | 0 | May, 2023 | Buy | |
| 921 | IS 15248 : Part 2 : 2014/ISO 3442-2 : 2005 |
Machine tools - Dimensions and geometric tests for self - Centring chucks with two - Piece jaws: Part 2 power - Operated chucks with tongue and groove type jaws | 0 | Sep, 2024 | Buy | |
| 922 | IS 15248 : Part 3 : 2014/ISO 3442-3 : 2007 |
Machine tools - Dimensions and geometric tests for self - Centring chucks with two - Piece jaws: Part 3 power - Operated chucks with serrated jaws | 0 | Sep, 2024 | Buy | |
| 923 | IS 15250 : Part 3 : 2018/ISO 10791-3 : 1998 |
Test conditions for machining centres: Part 3 geometric tests for machines with integral indexable or continuous universal heads (Vertical Z - Axis) | 0 | May, 2023 | Buy | |
| 924 | IS 15250 : Part 4 : 2018/ISO 10791-4 : 1998 |
Test conditions for machining centres: Part 4 accuracy and repeatability of positioning of linear and rotary axes | 0 | May, 2023 | Buy | |
| 925 | IS 15250 : Part 5 : 2018/ISO 10791-5 : 1998 |
Test conditions for machining centres: Part 5 accuracy and repeatability of positioning of work - Holding pallets | 0 | May, 2023 | Buy | |
| 926 | IS 15250 : Part 6 : 2018/ISO 10791-6 : 2014 |
Test conditions for machining centres: Part 6 accuracy of speeds and interpolations | 0 | May, 2023 | Buy | |
| 927 | IS 15250 : Part 8 : 2018/ISO 10791-8 : 2001 |
Test conditions for machining centres: Part 8 evaluation of contouring performance in the three coordinate planes | 0 | May, 2023 | Buy | |
| 928 | IS 15250 : Part 9 : 2018/ISO 1985 : 2015 |
Test conditions for machining centres: Part 9 evaluation on the operating times of tool change and pallet change | 0 | May, 2023 | Buy | |
| 929 | IS 15253 : 2002 |
Dew gauge - Specification | 0 | Feb, 2019 | Download | |
| 930 | IS 15261 : 2002/ISO 3274 : 1996 |
Geometrical product specifications (GPS) - surface texture : profile method - Nominal characteristics of contact (Stylus) instruments | 0 | Aug, 2023 | Buy | |
| 931 | IS 15264 : 2002/ISO 8785 : 1998 |
Geometrical product specification (GPS) - surface imperfections - Terms, definitions and parameters | 0 | Aug, 2023 | Buy | |
| 932 | IS 15269 : 2018/ISO 8039 (1 Revision) |
Optics and optical instruments - Microscopes - Values, tolerances and symbols for magnification (First Revision) | 0 | Sep, 2024 | Buy | |
| 933 | IS 15276 : 2002/ISO 8434-4:1995 |
Metallic tube connections for fluid power and general use 24° cone connectors with o - Ring weld - On nipples | 0 | Sep, 2024 | Buy | |
| 934 | IS 15277 : 2002/ISO 8434-5:1995 |
Metallic tube connections for fluid power and general use test methods for threaded hydraulic fluid power connections | 0 | Sep, 2024 | Buy | |
| 935 | IS 15287 : Part 1 : 2003/ISO 6344-1 :1998 |
Coated abrasives - Grain size analysis: Part 1 grain size distribution test | 0 | Oct, 2020 | Buy | |
| 936 | IS 15287 : Part 2 : 2003/ISO 6344-2 : 1998 |
Coated abrasives - Grain size analysis: Part 2 determination of grain size distribution of macrogrits P12 to P220 | 0 | Oct, 2020 | Buy | |
| 937 | IS 15288 : Part 1 : 2003/ISO 8486-1:1996 |
Bonded abrasives - Determination and designation of grain size distribution: Part 1 macrogrits F4 to F220 | 0 | Jun, 2023 | Buy | |
| 938 | IS 15288 : Part 2 : 2018/ISO 8486-2:2007 (1 Revision) |
Bonded abrasives - Determination and designation of grain size distribution: Part 2 microgrits F 230 to F 1200 (First Revision) | 0 | Jun, 2023 | Buy | |
| 939 | IS 15289 : Part 1 : 2013/ISO 9136-1: 2004 (1 Revision) |
Abrasive grains - Determination of bulk density: Part 1 macrogrits (First Revision) | 0 | Jun, 2023 | Buy | |
| 940 | IS 15289 Part 2 : 2013/ISO 9136-2 :1999 (1 Revision) |
Abrasive grains - Determination of bulk density: Part 2 microgrits (First Revision) | 0 | Jun, 2023 | Buy | |
| 941 | IS 15292 : 2003/ISO 15187:2000 |
Manipulating industrial robots -- Graphical user interfaces for programming and operation of robots (GUI-R) | 0 | Buy | ||
| 942 | IS 15297 : 2018/ISO 6103 : 2014 (1 Revision) |
Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (Second Revision) | 0 | Jun, 2023 | Buy | |
| 943 | IS 15299 : 2019/ISO 666 : 2012 (2 Revision) |
Machine tools - Mounting of grinding wheels by means of hub flanges (Second Revision) | 0 | Jun, 2023 | Buy | |
| 944 | IS 15300 : 2016/ISO 8695:2010 (1 Revision) |
Tools for pressing - Punches - Nomenclature and terminology (First Revision) | 0 | Dec, 2021 | Buy | |
| 945 | IS 15318 : 2003 |
Open front mechanical power presses - Vocabulary | 0 | Aug, 2024 | Download | |
| 946 | IS 15326 : Part 5 : 2019/ISO 3834-5 : 2021 (1 Revision) |
Quality requirements for fusion welding of metallic materials: Part 5 documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834 - 2, ISO 3834 - 3 or ISO 3834 - 4 (First Revision) | 0 | Jan, 2024 | Buy | |
| 947 | IS 15331 : 2003/ISO 11727:1999 |
Pneumatic fluid power - Identification of ports and control mechanisms of control valves and other components | 0 | Aug, 2023 | Buy | |
| 948 | IS 15332 : 2003/ISO 7285:1995 |
Pneumatic cylinders for mechanized multiple spot welding | 0 | Aug, 2023 | Buy | |
| 949 | IS 1535 : 2022/ISO 19289 : 2015 (2 Revision) |
Textiles - Cotton Lining Cloth - Specification (second revision) | 0 | ---- | Buy | |
| 950 | IS 15367 : Part 1 : 2003 |
Bulk handling equipment - Stacker (Rail Mounted): Part 1 general requirements | 0 | Feb, 2023 | Download | |
| 951 | IS 15367 : Part 2 : 2003 |
Bulk handling equipment - Stacker (Rail Mounted): Part 2 data to be furnished by the purchaser | 0 | Feb, 2023 | Download | |
| 952 | IS 15367 : Part 3 : 2003 |
Bulk handling equipment - Stacker (Rail Mounted): Part 3 data to be furnished by the manufacturer/supplier | 0 | Feb, 2023 | Download | |
| 953 | IS 15371 : Part 2 : 2018/ISO 14253-2:2011 (1 Revision) |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 2 guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (First Revision) | 1 | Mar, 2023 | Buy | |
| 954 | IS 15371 : Part 3 : 2018/ISO 14253-3 : 2011 (1 Revision) |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment: Part 3 guidelines for achieving agreements on measurement uncertainty statements (First Revision) | 0 | Mar, 2023 | Buy | |
| 955 | IS 15371 : Part 4 : 2018/ISO/TS 14253-4 ; 2010 |
Geometrical Product Specifications (GPS)-Inspection by Measurement of Workpieces and Measuring Equipment Part 4 Background on functional Limits and Specification Limits in Decision Rules | 0 | Mar, 2023 | Buy | |
| 956 | IS 15371 : Part 6 : 2018/14253-6 : 2012 |
Geometrical Product Specifications (GPS) - Inspection by Measurement of Workpieces and Measuring Equipment Part 6 Generalized Decision Rules for the Acceptance and Rejection of Instruments and Workpieces | 0 | Mar, 2023 | Buy | |
| 957 | IS 15373 : 2003/ISO 4291 : 1985 |
Method for the assessment of departure from roundness - Measurement of variations in radius | 0 | Aug, 2023 | Buy | |
| 958 | IS 15374 : 2003/ISO 4292 : 1985 |
Methods for the assessment of departure from roundness - Measurement by twoand three - Point methods | 0 | Feb, 2019 | Buy | |
| 959 | IS 15385 : 2003/ISO 2726 : 1995 |
Wood working tools - Metal - Bodied bench planes, plane cutters and cap irons | 0 | Mar, 2021 | Buy | |
| 960 | IS 15387 : 2003/ISO 5830:1984 |
Resistance spot welding - Male electrode caps | 0 | Sep, 2023 | Buy | |
| 961 | IS 15411 : 2003 |
Rotary tools for threaded fasteners - Performance test method | 0 | Jun, 2021 | Download | |
| 962 | IS 15419 : 2004 |
Jib cranes - Code of practice | 0 | Apr, 2019 | Download | |
| 963 | IS 15421 : Part 1 : 2003/ISO 13565-1 : 1996 |
Geometrical product specifications (GPS) - Surface texture: profile method - surfaces having stratified functional properties: Part 1 filtering and general measurement conditions | 0 | Aug, 2023 | Buy | |
| 964 | IS 15422 : 2003/ISO 12085 : 1996 |
Geoivietrical product specifications (GPS) - Surface texture: profile method - motif parameters | 0 | Aug, 2023 | Buy | |
| 965 | IS 15423 : Part 1 : 2003/ISO 5436-1 : 2000 |
Geometrical product specifications (GPS) - Surface texture: profile method measurement standards: Part 1 material measures | 0 | Aug, 2023 | Buy | |
| 966 | IS 15424 : Part 1 : 2018/ISO 9182-1:2013 (1 Revision) |
Tools for Pressing - Guide Pillars - Part 1 Types (First Revision) | 0 | May, 2023 | Buy | |
| 967 | IS 15424 : Part 2 : 2018/ISO 9182-2:2013 (1 Revision) |
Tools for pressing - Guide pillars: Part 2 type A, straight pillars (First Revision) | 0 | May, 2023 | Buy | |
| 968 | IS 15424 : Part 3 : 2021/ISO 8000-61 : 2016 (2 Revision) |
Tools for pressing — Guide pillars: Part 3 Type B, end-locking pillars (Second Revision) | 0 | ---- | Buy | |
| 969 | IS 15425 : 2004/ISO 9137 : 1990 |
Abrasive grains -- Determinations of capillarity | 0 | Apr, 2021 | Buy | |
| 970 | IS 15427 : 2004/ISO 15143 |
Conveyor belting of elastomeric and steel cord construction for general material handling - Specification | 0 | Apr, 2021 | Buy | |
| 971 | IS 15427 : Part 4 : 2015/ISO 15143 |
Steel cord conveyor belts: Part 4 vulcanized belt joints (First Revision) | 0 | Jan, 2025 | Buy | |
| 972 | IS 15432 : 2003/ISO 7986:1997 |
Hydraulic fluid power - Sealing devices - Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications | 0 | Aug, 2023 | Buy | |
| 973 | IS/ISO 15442 : 2012/ISO 15442:2012 |
Cranes - Safety requirements for loader cranes | 0 | ---- | Buy | |
| 974 | IS 15447 : Part 1 : 2004 |
Commercial blasting explosives - Specification: Part 1 nitroglycerine based explosives | 0 | Apr, 2021 | Download | |
| 975 | IS 15447 : Part 2 : 2008 |
Commercial blasting explosives: Part 2 slurry/emulsion explosives - Specification | 1 | Sep, 2023 | Download | |
| 976 | IS 15448 : Part 1 : 2018/ISO 9448-1:2013 (1 Revision) |
Tools for pressing - Guide bushes: Part 1 forms (First Revision) | 0 | Aug, 2024 | Buy | |
| 977 | IS 15448 : Part 2 : 2017/ISO 9448-2 (1 Revision) |
Tools for pressing - Guide bushes: Part 2 form A, gliding bushes, plain, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 978 | IS 15448 : Part 3 : 2018/ISO 9448-3 (1 Revision) |
Tools for pressing - Guide bushes: Part 3 form B, ball cage bushes, plain, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 979 | IS 15448 : Part 4 : 2018/ISO 9448-4:1991 (1 Revision) |
Tools for pressing - Guide bushes: Part 4 form C, gliding bushes, headed, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 980 | IS 15448 : Part 5 : 2018/ISO 9448-5 (1 Revision) |
Tools for pressing - Guide bushes: Part 5 form D, ball cage bushes, headed, type 1 (First Revision) | 0 | Aug, 2024 | Buy | |
| 981 | IS 15448 : Part 6 : 2018/ISO 9448-6 (1 Revision) |
Tools for pressing - Guide bushes: Part 6 form E, gliding bushes, flanged, type 1 (First Revision) | 0 | May, 2023 | Buy | |
| 982 | IS 15448 : Part 7 : 2018/ISO 9448-7:2013 (1 Revision) |
Tools for pressing - Guide bushes: Part 7 form F, ball cage bushes, flanged, type 1 (First Revision) | 0 | May, 2023 | Buy | |
| 983 | IS 15448 : Part 8 : 2018/ISO 9448-8 (1 Revision) |
Tools for pressing - Guide bushes: Part 8 form G, gliding bushes, stepped, type 1 (First Revision) | 0 | May, 2023 | Buy | |
| 984 | IS 15448 : Part 9 : 2018/ISO 9448-9 (1 Revision) |
Tools for pressing - Guide bushes: Part 9 form B, ball cage bushes, plain, type 2 (First Revision) | 0 | May, 2023 | Buy | |
| 985 | IS 15448 : Part 10 : 2018/ISO 9448-10 (1 Revision) |
Tools for pressing - Guide bushes: Part 10 form E, gliding bushes, flanged, type 2 (First Revision) | 0 | May, 2023 | Buy | |
| 986 | IS 15448 : Part 11 : 2018/ISO 9448-11 (1 Revision) |
Tools for pressing - Guide bushes: Part 11 form F, ball cage bushes, flanged, type 2 (First Revision) | 0 | May, 2023 | Buy | |
| 987 | IS 15481 : Part 1 : 2004 |
Wireline diamond core drilling equipment - System A: Part 1 metric units | 0 | Mar, 2021 | Download | |
| 988 | IS 15483 : Part 1 : 2019/ISO 12858-1 (1 Revision) |
Optics and optical instruments - Ancillary devices for geodetic instruments: Part 1 inver levelling staffs (First Revision) | 0 | Jan, 2025 | Buy | |
| 989 | IS 15490 : 2017 (1 Revision) |
Seamless steel cylinders for on - Board storage of compressed natural gas as a fuel for automotive vehicles - Specification (First Revision) | 1 | Mar, 2022 | Download | |
| 990 | IS 15492 : Part 3 : 2022/ISO 8000-1 : 2022 (1 Revision) |
CODE OF RECOMMENDED PRACTICE FOR SAFETY IN WATER PARKS PART 3 Instructions | 0 | ---- | Buy | |
| 991 | IS 15500 : Part 1 to 8 : 2021/ISO 13579-11 : 2017 (1 Revision) |
Deepwell Handpumps Components and Special Tools Specification | 2 | ---- | Buy | |
| 992 | IS 15503 : Part 2 : 2014/ISO 9186-2 : 2008 |
Graphical symbols - Test methods: Part 2 method for testing perceptual quality (First Revision) | 0 | Aug, 2024 | Buy | |
| 993 | IS 15509 : 2017/ISO 1275 : 2006 (1 Revision) |
Double - Pitch precision roller chains - Attachments and associated chain sprockets for transmission and conveyors (First Revision) | 0 | Mar, 2022 | Buy | |
| 994 | IS 15510 : 2004/ISO 3512 |
Heavy - Duty cranked - Link transmission chains | 0 | Feb, 2021 | Buy | |
| 995 | IS 15511 : 2004/ISO 9633 |
Cycle chains - Characteristics and test methods | 1 | Feb, 2021 | Buy | |
| 996 | IS/ISO 15531 : Part 1 : 2004/ISO 15531-1 : 2004 |
Industrial automation systems and integration -- Industrial manufacturing management data: Part 1 General overview | 0 | Jan, 2023 | Buy | |
| 997 | IS/ISO 15531 : Part 31 : 2004/IS 15531 : Part 31 : 2004 |
Industrial automation systems and integration -- Industrial manufacturing management data: Part 31 Resource information model | 0 | Jan, 2023 | Buy | |
| 998 | IS/ISO 15531 : Part 32 : 2005/ISO 15531 : Part 32 : 2005 |
Industrial automation systems and integration - Industrial manufacturing management data : resources usage management: Part 32 conceptual model for resources usage management data | 0 | Jan, 2023 | Buy | |
| 999 | IS/ISO 15531 : Part 42 : 2005/ISO 15531 : Part 42 : 2005 |
Industrial automation systems and integration - Industrial manufacturing management data: Part 42 time model | 0 | Jan, 2023 | Buy | |
| 1000 | IS/ISO 15531 : Part 43 : 2006/ISO 15531 : Part 43 : 2006 |
Industrial Automation Systems and Integration Industrial Manufacturing Management Data Part 43 Manufacturing Flow Management Data : Data Model for Flow Monitoring and Manufacturing Data Exchange | 0 | Jan, 2023 | Buy | |
| 1001 | IS 15534 : 2004/ISO 5031:1977 |
Continuous mechanical handling equipment for loose bulk materials - Couplings and hose components used in pneumatic handling - Safety code | 0 | Oct, 2024 | Buy | |
| 1002 | IS 15535 : 2004/ISO 2327:1972 |
Pneumatic handling appliances for loose bulk materials - Piping | 0 | Oct, 2024 | Buy | |
| 1003 | IS 15536 : 2004/ISO 3284:19 |
Continuous mechanical handling equipment for loose bulk materials - Dimensions of bends for use in pneumatic handling | 0 | Oct, 2024 | Buy | |
| 1004 | IS 15538 : 2018/ISO 9284 : 1994 (1 Revision) |
Abrasive grains - Test sieving machines | 0 | Jan, 2025 | Buy | |
| 1005 | IS 15555 : 2004/ISO 3310-3:1990 |
Test sieves - Technical requirements and testing - Test sieves of electroformed sheets | 0 | Jun, 2023 | Buy | |
| 1006 | IS 15560 : 2005 |
Point hooks with shank up to 160 tonne specification | 1 | Oct, 2020 | Download | |
| 1007 | IS 15568 : 2005/ISO 10485:1991 |
Cone proof load test on nuts | 0 | Feb, 2021 | Buy | |
| 1008 | IS 15569 : 2005/ISO 10484:1997 |
Widening test on nuts | 0 | Feb, 2021 | Buy | |
| 1009 | IS 15571 : 2005/ISO/TR 11065 : 1992 |
Industrial automation glossary | 0 | Jan, 2023 | Buy | |
| 1010 | IS 15575 : Part 2 : 2023/ISO 10110-18:2018 (2 Revision) |
Electroacoustics Sound Level Meters Part 2: Pattern Evaluation Tests (Second Revision) | 0 | ---- | Buy | |
| 1011 | IS 15577 : Part 1 : 2005/ISO 9974-1:1996 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing: Part 1 threaded ports | 0 | Dec, 2024 | Buy | |
| 1012 | IS 15577 : Part 2 : 2005/ISO 9974-2:1996 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing: Part 2 stud ends with elastomeric sealing (Type E) | 0 | Dec, 2024 | Buy | |
| 1013 | IS 15577 : Part 3 : 2005/ISO 9974-3:1996 |
Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or Metal - to - Metal sealing: Part 3 stud ends with metal - To - Metal sealing (Type B) | 0 | Mar, 2022 | Buy | |
| 1014 | IS 15578 : 2005 |
Code of Practice for Handling and Usage of Gas Mixtures | 0 | Feb, 2021 | Download | |
| 1015 | IS 15583 : 2005 |
Compressed Helium Gas - Specification | 1 | Feb, 2021 | Download | |
| 1016 | IS 15593 : Part 1 : 2005/lSO/TS 10811-1 : 2000 |
Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment: Part 1 measurement and evaluation | 0 | Feb, 2021 | Buy | |
| 1017 | IS 15593 : Part 2 : 2005/lSO/TS 10811-2 : 2000 |
Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment: Part 2 classification | 0 | Feb, 2021 | Buy | |
| 1018 | IS 15620 : 2019/ISO 4383 : 2012 (1 Revision) |
Plain Bearings — Multilayer Materials for Thin-Walled Plain Bearing ( First Revision ) | 0 | Apr, 2024 | Buy | |
| 1019 | IS 15624 : 2005/ISO 6691 : 2000 |
Thermoplastic polymers for plain bearings - Classification and designation | 0 | Jun, 2020 | Buy | |
| 1020 | IS/ISO 15635 : 2001/ISO 15635 : 2001 |
Coated abrasives - Flap discs | 0 | Jun, 2023 | Buy | |
| 1021 | IS 15635 : Part 1 : 2006/ISO 10360-1 : 2000 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 1 vocabulary | 0 | Mar, 2022 | Buy | |
| 1022 | IS 15635 : Part 2 : 2014/ISO 10360-2 : 2009 (1 Revision) |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 2 CMMs used for measuring linear dimensions (First Revision) | 0 | Mar, 2021 | Buy | |
| 1023 | IS 15635 : Part 3 : 2006/ISO 10360-3 : 2000 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 3 CMMs with the axis of a rotary table as the fourth axis | 0 | Mar, 2022 | Buy | |
| 1024 | IS 15635 : Part 6 : 2006/ISO 10360-6 : 2001 |
Geometrical product specifications (GPS) - acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6 estimation of errors in computing gaussian associated features | 1 | Mar, 2021 | Buy | |
| 1025 | IS 15635 : Part 7 : 2019/ISO 10360-7 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM): Part 7 CMMs equipped with imaging probing systems | 0 | Aug, 2023 | Buy | |
| 1026 | IS 15635 : Part 8 : 2019/ISO 10360-8 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 8 CMMs equipped with optical distance sensors | 0 | Aug, 2023 | Buy | |
| 1027 | IS 15635 : Part 9 : 2019/ISO 10360-9 |
Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS): Part 9 CMMs with multiple probing systems | 0 | Aug, 2023 | Buy | |
| 1028 | IS 15637 : 2006 |
Welded stainless steel cylinders for liquefied petroleum gases (LPG) from 0.5 litre to 250 litre water capacity - Specification | 1 | Mar, 2020 | Download | |
| 1029 | IS 15641 : Part 1 : 2006/ISO 10101-1 |
Natural gas - Determination of water by the karl fischer method: Part 1 lNtroduction | 0 | Dec, 2022 | Buy | |
| 1030 | IS 15641 : Part 2 : 2006/ISO 10101-2 |
Natural gas - Determination of water by the karl fischer method: Part 2 titration procedure | 0 | Apr, 2021 | Buy | |
| 1031 | IS 15641 : Part 3 : 2007/ISO 10101 -3 |
Natural gas - Determination of water by karl fischer method: Part 3 coulometric procedure | 0 | Jan, 2021 | Buy | |
| 1032 | IS 15649 : 2006 |
Machine tools chip bins for chip conveyor - Specification | 0 | May, 2023 | Download | |
| 1033 | IS 15658 : 2021/ISO 283 :2015 (1 Revision) |
Concrete Paving Blocks - Specification ( First Revision ) | 1 | ---- | Buy | |
| 1034 | IS 15660 : 2017 (1 Revision) |
Refillable transportable seamless aluminium alloy gas cylinders - Specification (First Revision) | 2 | Mar, 2022 | Download | |
| 1035 | IS 15672 : 2006 |
Flow measurement of natural gas and fluids by coriolis meters | 0 | Mar, 2022 | Download | |
| 1036 | IS 15673 : 2006 |
Folow mesasurment of natural gas by rotary piston meters | 1 | Mar, 2022 | Download | |
| 1037 | IS 15674 : 2006 |
Flow measurement of natural gas by ultrasonic meter | 1 | Mar, 2022 | Download | |
| 1038 | IS 15675 : 2006 |
Flow measurement of natural gas and fluids by orifice plate meters | 1 | Mar, 2022 | Download | |
| 1039 | IS 15677 : 2006 |
Metering of natural gas - Code of practice | 1 | Mar, 2022 | Download | |
| 1040 | IS 15678 : 2006 |
Intelligent pigging of pressurized natural gas pipelines - Code of practice | 1 | Mar, 2021 | Download | |
| 1041 | IS 15679 : 2006 |
Hot tapping , stopple plugging/line plugging of pressurized natural gas pipelines - Code of practice | 1 | Mar, 2021 | Download | |
| 1042 | IS 1568 : 1970 (1 Revision) |
Specification for wire cloth for general purposes (First Revision) | 1 | Jun, 2023 | Download | |
| 1043 | IS 15685 : 2006 |
Purchaser's data sheet for power boiler | 0 | Feb, 2022 | Download | |
| 1044 | IS 15696 : 2006 |
Supplier's data sheet for power boiler | 1 | Feb, 2022 | Download | |
| 1045 | IS 15705 : 2006/ISO 23429:2004 |
Gauging of hexagon sockets | 0 | Apr, 2024 | Buy | |
| 1046 | IS 15744 : 2007 |
Angular Deflection for "C" Frame Mechanical Presses — Specification | 0 | Aug, 2024 | Download | |
| 1047 | IS/ISO 15744 : 2002/ISO 15744 : 2002 |
Hand - Held non - Electric power tools - Noise measurement code - Engineering method (Grade 2) | 0 | Oct, 2024 | Buy | |
| 1048 | IS 15745 : 2007 |
Deflection for straight sided mechanical presses - Specification | 0 | Aug, 2024 | Download | |
| 1049 | IS 15746 : 2007 |
ANGULAR DEFLECTION FOR ‘C’ FRAME HYDRAULIC PRESSES - SPECIFICATION | 0 | Aug, 2024 | Download | |
| 1050 | IS 15747 : 2007 |
Angular deflection for straight sided hydraulic presses - Specification | 0 | Aug, 2024 | Download | |
| 1051 | IS 15762 : 2007/ISO 5413 : 1993 |
Machine tools -- Positive drive of morse tapers | 0 | Sep, 2017 | Buy | |
| 1052 | IS 15769 : 2008 |
Flux cored (Tubular) electrodes for gas shielded and self - Shielded metal welding of carbon or carbon - Manganese steel | 2 | Mar, 2021 | Download | |
| 1053 | IS 15777 : 2008 |
Selection of hacksaw tooth for metal cutting -- Recommendations | 0 | Aug, 2024 | Download | |
| 1054 | IS 15790 : 2008/ISO 15654 |
Fatigue test method for transmission precision roller chains | 0 | Feb, 2021 | Buy | |
| 1055 | IS/ISO 15817 : 2012/ISO 15817:2012 |
Earth-Moving Machinery - Safety Requirements for Remote Operator Control Systems | 0 | ---- | Buy | |
| 1056 | IS/ISO 15818 : 2017/ ISO 15818:2017 |
Earth-Moving Machinery - Lifting and Tying-Down Attachment Points - Performance Requirements | 0 | ---- | Buy | |
| 1057 | IS 15836 : Part 1 : 2008/ISO 15534-1 : 2000 |
Ergonomic design for the safety of machinery: Part 1 principles for determining the dimensions required for openings for whole - Body access into machinery | 0 | Jun, 2023 | Buy | |
| 1058 | IS 15836 : Part 2 : 2008/ISO 15534-2 : 2000 |
Ergonomic design for the safety of machinery: Part 2 principles for determining the dimensions required for access openings | 0 | May, 2021 | Buy | |
| 1059 | IS 15836 : Part 3 : 2008/ISO 15534-3 ; 2000 |
Ergonomic design for the safety of machinery: Part 3 anthropometric data | 0 | May, 2021 | Buy | |
| 1060 | IS 15838 : Part 1 to 10 : 2008 |
Mining - Glossary of terms ( Amalgamating of IS 4791 : 1968, IS 4792 : 1968, IS 4863 :1968, IS 5028 l 1969, IS 5307 : 1968, IS 5767 : 1970, IS 5768 : 1970, IS 5814 : 1970, IS 5940 : 1979 AND IS 7580 : 1975) | 0 | Nov, 2023 | Download | |
| 1061 | IS 15894 : 2018 (1 Revision) |
Inspection gauges for checking taper threads of gas cylinder valves and cylinder necks - Taper 1 in 16 on diameter - Specification (First Revision) | 1 | Jan, 2024 | Download | |
| 1062 | IS 15934 : Part 3 : 2022/ISO 14405-2:2018 (1 Revision) |
LIQUID CRYSTAL DISPLAY DEVICES PART 3: LIQUID CRYSTAL DISPLAY LCD CELLS SECTIONAL SPECIFICATION | 0 | ---- | Buy | |
| 1063 | IS 15942 : 2011/ISO 15785 : 2002 |
Technical drawings -- Symbolic presentation and indication of adhesive, fold and pressed joints | 0 | Mar, 2022 | Buy | |
| 1064 | IS 15946 : 2018/ISO 9539:2010 (1 Revision) |
Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (First Revision) | 0 | Sep, 2023 | Buy | |
| 1065 | IS 15966 : 2013 |
Refillable welded steel cylinder for liquefied petroleum gas (LPG) - Procedure for checking before, during and after filling | 0 | Oct, 2022 | Download | |
| 1066 | IS 15975 : 2020 (1 Revision) |
Gas Cylinders — Conditions for Filling Gas Cylinders ( First Revision ) | 0 | Dec, 2024 | Download | |
| 1067 | IS 15977 : 2013 |
Classification and acceptance tests for bare solid wire electrodes and wire flux combination for submerged arc welding of structrual steel - Specification | 0 | Feb, 2024 | Download | |
| 1068 | IS/ISO 15998 : 2008/ISO 15998:2008 |
Earth-Moving Machinery - Machine-Control Systems ( MCS ) Using Electronic Components - Performance Criteria and Tests for Functional Safety | 0 | ---- | Buy | |
| 1069 | IS/ISO 16001 : 2017/ISO 16001:2017 |
Earth-Moving Machinery - Object Detection Systems and Visibility Aids - Performance Requirements and Tests | 0 | ---- | Buy | |
| 1070 | IS 16002 : PART 1 : 2012/ISO 17652-1:2003 |
Welding - Test for shop primers in relation to welding and allied processes: Part 1 general requirements | 0 | Sep, 2023 | Buy | |
| 1071 | IS 16002 : PART 2 : 2012/ISO 17652-2:2003 |
Welding - Test for shop primers in relation to welding and allied processes: Part 2 welding properties of shop primers | 0 | Sep, 2023 | Buy | |
| 1072 | IS 16002 : PART 3 : 2012/ISO 17652-3:2003 |
Welding - Test for shop primers in relation to welding and allied processes: Part 3 thermal cutting | 0 | Sep, 2023 | Buy | |
| 1073 | IS 16002 : PART 4 : 2012/ISO 17652-4:2003 |
Welding - Test for shop primers in relation to welding and allied processes: Part 4 emission of fumes and gases | 0 | Sep, 2023 | Buy | |
| 1074 | IS 16013 : 2018 (1 Revision) |
Welded wire gabions (Metallic - Coated Or Metallic - Coated With PVC Coating) - Specification (First Revision) | 0 | May, 2023 | Download | |
| 1075 | IS 16014 : 2018 (1 Revision) |
Mechanically woven, double - Twisted, hexagonal wire mesh gabions, revet mattresses, rock fall netting and other products for civil engineering purposes (Galvanized Steel Wire Or Galvanized Steel Wire With Polymer Coating) - Specification (First Revision) | 0 | Dec, 2023 | Download | |
| 1076 | IS 16050 : 2020 (1 Revision) |
Gas Cylinders — Seamless, Welded and Composite Cylinders for Compressed and Liquefied Gases ( Excluding Acetylene ) — Inspection at Time of Filling ( First Revision ) | 0 | ---- | Download | |
| 1077 | IS 16054 : 2013 |
Periodic inspection and testing - Welded low carbon steel cylinders exceeding 5 - Litre water capacity for liquified petroleum gas (Lpg) - Code of practice | 0 | Jan, 2024 | Download | |
| 1078 | IS 16059 : 2013 |
Solid carbide parallel shank twist drills jobber series -- Specification | 0 | Aug, 2024 | Download | |
| 1079 | IS 16060 : 2013 |
Solid carbide parallel shank twist drills stub series -- Specification | 0 | Aug, 2024 | Download | |
| 1080 | IS 1607 : 2013 (2 Revision) |
Methods of test sieving (Second Revision) | 0 | Mar, 2023 | Buy | |
| 1081 | IS 16087 : 2016 (1 Revision) |
Biogas (Biomethane) - Specification (First Revision) | 0 | Oct, 2020 | Download | |
| 1082 | IS 16136 : 2013 |
Solid carbide end mills with continuous parallel shank -- Specification | 0 | Aug, 2024 | Download | |
| 1083 | IS 16140 : 2014/ISO 12162:2009 |
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient | 0 | Apr, 2025 | Buy | |
| 1084 | IS 16142 : 2019/ISO 16664:2017 (1 Revision) |
Gas Analysis - Handling of Calibration Gases and Gas Mixtures - Guidelines (First Revision) | 0 | Mar, 2024 | Buy | |
| 1085 | IS 16143 : Part 8 : 2021/ISO 21982 : 2020 (1 Revision) |
Hard coal and coke - Mechanical sampling : Part 8 methods of testing for bias (First Revision) | 0 | ---- | Buy | |
| 1086 | IS 16150 : Part 1 : 2023/ISO 10110-8:2019 (1 Revision) |
Fish feed - Specification Part 1 Carp feed | 0 | ---- | Buy | |
| 1087 | IS 16153 : 2017/IS0 684 |
Analysis of soaps - Determination of total free alkali | 0 | Feb, 2022 | Buy | |
| 1088 | IS 16175 : 2014 |
Periodic inspection and requalification - Liquefied petroleum gas (LPG) cylinders for automotive use - Code of practice | 0 | Jan, 2024 | Download | |
| 1089 | IS 16176 : 2014 |
Ratchet pipe threader for taper pipe threads (R - Series) -- Specification | 1 | Dec, 2019 | Download | |
| 1090 | IS 16185 : 2014 |
Periodic inspection and testing - Welded carbon steel gas cylinders - Code of practice | 0 | Jan, 2024 | Download | |
| 1091 | IS 16224 : Part 1 : 2014/ISO 12780-1 : 2011 |
Geometrical Product Specifications (GPS) - Straightness Part 1 Vocabulary and Parameters of Straightness | 0 | Jul, 2024 | Buy | |
| 1092 | IS 16224 : Part 2 : 2014/ISO 12780-2 : 2011 |
Geometrical product specifications (GPS) - Straightness: Part 2 specification operators | 0 | Jul, 2024 | Buy | |
| 1093 | IS 16225 : Part 1 : 2014/ISO 12180-1 : 2011 |
Geometrical product specifications (GPS) - Cylindricity: Part 1 vocabulary and parameters of cylindrical form | 0 | Jul, 2024 | Buy | |
| 1094 | IS 16225 : Part 2 : 2014/ISO 12180-2 : 2011 |
Geometrical product specifications (GPS) - Cylindricity: Part 2 specification operators | 0 | Jul, 2024 | Buy | |
| 1095 | IS 16226 : Part 1 : 2014/ISO 12181-1 : 2011 |
Geometrical product specifications (GPS) - Roundness: Part 1 vocabulary and parameters of roundness | 0 | Jul, 2024 | Buy | |
| 1096 | IS 16226 : Part 2 : 2014/ISO 12181-2 : 2011 |
Geometrical product specifications (GPS) - Roundness: Part 2 specification operators | 0 | Jul, 2024 | Buy | |
| 1097 | IS 16247 : 2019/ISO 6141:2015 (1 Revision) |
Gas Analysis - Contents of Certificates for Calibration Gas Mixtures (First Revision) | 1 | Mar, 2024 | Buy | |
| 1098 | IS 16248 : 2014/ISO 6144 : 2003 |
Gas Analysis - Preparation of Calibration Gas Mixtures - Static Volumetric Method | 0 | Jun, 2020 | Buy | |
| 1099 | IS 16249 : Part 2 : 2019/ISO 6145-2:2014 (1 Revision) |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Methods: Part 2 Piston Pumps (First Revision) | 0 | Mar, 2024 | Buy | |
| 1100 | IS 16249 : Part 4 : 2015/ISO 6145-4 : 2004 |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods: Part 4 Continuous Syringe Injection Method | 0 | Jun, 2020 | Buy | |
| 1101 | IS 16249 : Part 5 : 2015/ISO 6145-5 : 2009 |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods: Part 5 Capillary Calibration Devices | 0 | Jun, 2020 | Buy | |
| 1102 | IS 16249 : Part 6 : 2019/ISO 6145-6:2017 (1 Revision) |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Methods: Part 6 Critical Flow Orifices (First Revision) | 0 | Mar, 2024 | Buy | |
| 1103 | IS 16249 : Part 7 : 2020/ISO 6145 (part 7):20 (1 Revision) |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Methods Part 7 Thermal Mass-Flow Controllers (First Revision) | 0 | Sep, 2024 | Buy | |
| 1104 | IS 16249 : Part 8 : 2015/ISO 6145-8 : 2005 |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods: Part 8 Diffusion Method | 0 | Jun, 2020 | Buy | |
| 1105 | IS 16249 : Part 9 : 2015/ISO 6145-9 : 2009 |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods: Part 9 Saturation Method | 0 | Jun, 2020 | Buy | |
| 1106 | IS 16249 : Part 10 : 2015/ISO 6145-10 : 2002 |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods: Part 10 Permeation Method | 0 | Jun, 2020 | Buy | |
| 1107 | IS 16249 : Part 11 : 2015/ISO 6145-11 : 2005 |
Gas Analysis - Preparation of Calibration Gas Mixtures Using Dynamic Volumetric Methods: Part 11 Electrochemical Generation | 0 | Jun, 2020 | Buy | |
| 1108 | IS 16250 : 2015/ISO 15796 : 2005 |
Gas Analysis Investigation and Treatment of Analytical Bias | 0 | Jun, 2020 | Buy | |
| 1109 | IS 16252 : 2014/ISO 14912 : 2003 |
Gas Analysis - Conversion of Gas Mixture Composition Data | 0 | Jun, 2020 | Buy | |
| 1110 | IS 16253 : 2016/ISO 26142 : 2010 |
Hydrogen Detection Apparatus - Stationary Applications | 0 | Nov, 2021 | Buy | |
| 1111 | IS 16260 : 2019/ISO 6142-1 : 2015 (1 Revision) |
Gas Analysis Preparation of Calibration Gas Mixtures Gravimetric Method for Class 1 Mixtures (First Revision) | 1 | Mar, 2024 | Buy | |
| 1112 | IS 16264 : 2014/ISO 6143 : 2001 |
Gas Analysis - Comparison Methods for Determining and Checking the Composition of Calibration Gas Mixtures | 0 | Jun, 2020 | Buy | |
| 1113 | IS 16271 : 2014 |
Dissolved acetylene gas cylinders - Inspection at time of filling - Code of practice | 0 | Jan, 2024 | Download | |
| 1114 | IS 16277 : Part 1 : 2014/ISO 10882-1:2011 |
Health and Safety in Welding and Allied Processes Sampling of Airborne Particles and Gases in the Operator’s Breathing Zone Part 1 Sampling of Airborne Particles | 0 | Sep, 2023 | Buy | |
| 1115 | IS 16278 : Part 1 : 2014/ISO 15011-1 : 2009 |
Health and safety in welding and allied processes - Laboratory method for sampling fumes and gases: Part 1 determination of fume emission rate during arc welding and collection of fumes for analysis | 0 | Sep, 2023 | Buy | |
| 1116 | IS 16278 : Part 2 : 2018/ISO 15011-2:2009 |
Health and Safety in Welding and Allied Processes  Laboratory Method for Sampling Fume and Gases Part 2 Determination of the Emission Rates of Carbon Monoxide (CO), Carbon Dioxide (CO2), Nitrogen Monoxide (NO) and Nitrogen Dioxide (NO2) During Arc Welding, Cutting and Gouging | 0 | Sep, 2023 | Buy | |
| 1117 | IS 16294 : Part 2 : 2016/ISO 12781-2:2011 |
Geometrical product specifications (GPS) - Flatness: Part 2 specification operators | 0 | Mar, 2021 | Buy | |
| 1118 | IS 16299 : 2014 |
Periodic inspection and requalification - High pressure steel cylinders for the on - Board storage of compressed natural gas as a fuel for automotive vehicles, cylinders for hcng blends and cng cascade cylinders - Code of practice | 0 | Jan, 2024 | Download | |
| 1119 | IS 16300 : 2014/ISO/TR 16015 : 2003 |
Geometrical product specifications (GPS) - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influence | 0 | Jul, 2024 | Buy | |
| 1120 | IS 16318 : 2015/ISO 12819 : 2009 |
Methods of evaluation of the battery life of a battery-powered watch | 0 | Mar, 2021 | Buy | |
| 1121 | IS 16319 : 2015/ISO 3159 : 2009 |
Timekeeping instruments -- Wrist-chronometers with spring balance oscillator | 0 | Mar, 2021 | Buy | |
| 1122 | IS 1632 : 1993 (1 Revision) |
Optical instruments - Bubbles - Specification (First Revision) | 0 | Feb, 2025 | Download | |
| 1123 | IS 16324 : 2014/ISO 558 : 1980 |
Conditioning and Testing - Standard Atmospheres - Definitions | 0 | Aug, 2024 | Buy | |
| 1124 | IS 16365 : 2015/ISO 21182 |
Light conveyor belts - Determination of the coefficient of friction | 0 | Jan, 2025 | Buy | |
| 1125 | IS 16370 : 2015/ISO 8419:2003 |
Belt drives - Narrow V - Belts - Sections 9n/j, 15n/j and 25n/j (Lengths In The Effective System) | 0 | Jan, 2025 | Buy | |
| 1126 | IS 16376 : 2017/ISO 21342 : 2019 |
Synchronous belt drives - Automotive belts | 0 | ---- | Buy | |
| 1127 | IS 16377 : 2017/ISO 9011:2007 |
Synchronous belt drives - Automotive pulleys | 0 | ---- | Buy | |
| 1128 | IS 16378 : 2017/ISO 9563 : 2015 |
Belt drives - Electrical conductivity of antistatic endless synchronous belts - Characteristics and test method | 0 | ---- | Buy | |
| 1129 | IS 16379 : 2017/ISO 9608:1994 |
V - Belts - Uniformity of belts - Test method for determination of centre distance variation | 0 | ---- | Buy | |
| 1130 | IS 16381 : 2017/ISO 21178:2020 |
Light conveyor belts - Determination of electrical resistances | 0 | Mar, 2022 | Buy | |
| 1131 | IS 16382 : 2017/ISO 21179 : 2013 |
Light conveyor belts - Determination of the electrostatic field generated by a running light conveyor belt | 0 | Mar, 2022 | Buy | |
| 1132 | IS 16383 : 2017/ISO 21180 : 2013 |
Light conveyor belts - Determination of the maximum tensile strength | 0 | Mar, 2022 | Buy | |
| 1133 | IS 16384 : 2017/ISO 21181 : 2013 |
Light conveyor belts - Determination of the relaxed elastic modulus | 0 | Mar, 2022 | Buy | |
| 1134 | IS 16385 : Part 1 : 2017/ISO 21183-1 : 2005 |
Light conveyor belts: Part 1 principal characteristics and applications | 0 | Mar, 2022 | Buy | |
| 1135 | IS 16387 : 2017/ISO 24035 : 2014 |
Belt drives - V - Belts and the corresponding pulleys for agricultural machineries - Dimensions | 0 | ---- | Buy | |
| 1136 | IS 16435 : 2017 |
Solid carbide end mills with stepped parallel shank -- Specification | 0 | ---- | Download | |
| 1137 | IS 16448 : 2021/10434 : 2020 (1 Revision) |
Systems and software engineering — Systems and software quality requirements and evaluation (SQuaRE) — Quality requirements framework (First Revision) | 0 | Sep, 2024 | Buy | |
| 1138 | IS 16479 : 2020 (1 Revision) |
Performance Requirements and Test Procedures of Braking Systems for Wheeled or High-Speed Rubber Tracked Earth Moving Machines and Construction Equipment Vehicles ( First Revision ) | 1 | ---- | Buy | |
| 1139 | IS 16480 : 2018 |
Earth moving machinery - Rubber tyred machines - Steering requirements | 0 | Jan, 2023 | Download | |
| 1140 | IS 16484 : 2017 |
Liquid off - Take valve fitting to gas cylinders or tanks (Mobile Or Static) for liquid petroleum gas (LPG) - Specification | 1 | Mar, 2022 | Download | |
| 1141 | IS 16485 : 2020 (1 Revision) |
Flame Arresters — Performance Requirements, Test Methods and Limits for Use ( First Revision ) | 0 | Dec, 2024 | Download | |
| 1142 | IS 16486 : 2017 |
Method for calibration and classification of torque measuring devices including torque wrench tester | 0 | Aug, 2024 | Download | |
| 1143 | IS 16491 : Part 1 : 2016/ISO 13385-1:2019 |
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 1 calipers; design and metrological characteristics | 0 | Mar, 2021 | Buy | |
| 1144 | IS 16492 : 2017/ISO 14539 : 2000 |
Manipulating industrial robots - Object handling with grasp - Type grippers - Vocabulary and presentation of characteristics | 0 | Apr, 2021 | Buy | |
| 1145 | IS 16507 : 2017 |
Transportable gas cylinders cascade - Specification | 0 | Mar, 2022 | Download | |
| 1146 | IS 16509 : 2020/ISO 22734:2019 |
Hydrogen Generators Using Water Electrolysis - Industrial, Commercial and Residential Applications (First Revision) | 0 | Mar, 2025 | Buy | |
| 1147 | IS 16511 : 2017 |
Management systems for Eco - Friendly Non - Coal mining operations - Requirements | 0 | Sep, 2022 | Download | |
| 1148 | IS 16512 : Part 1 : 2016/ISO 16110-1 : 2007 |
Hydrogen Generators Using Fuel Processing Technologies: Part 1 Safety | 0 | Oct, 2021 | Buy | |
| 1149 | IS 16514 : Part 1 : 2018 |
Non-Automatic Weighing Instruments Part 1 Terminology and Definitions | 0 | Apr, 2024 | Download | |
| 1150 | IS/ISO 16528 : Part 1 : 2007/ISO 16528-1:2007 |
Boilers and Pressure Vessels Part 1 Performance Requirements | 0 | ---- | Buy | |
| 1151 | IS/ISO 16528 : Part 2 : 2007/ISO 16528-1:2007 |
Boilers and Pressure Vessels Part 2 Procedures for Fulfilling the Requirements of ISO 16528-1 | 0 | ---- | Buy | |
| 1152 | IS 16530 : Part 1 : 2016/ISO 16100-1 : 2009 |
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability: Part 1 framework | 0 | Apr, 2021 | Buy | |
| 1153 | IS 16530 : Part 2 : 2016/ISO 16100-2 : 2003 |
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability part 2 profiling methodology | 0 | Apr, 2021 | Buy | |
| 1154 | IS 16530 : Part 3 : 2017/ISO 16100-3 : 2005 |
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability: Part 3 interface services, protocols and capability templates | 0 | Apr, 2021 | Buy | |
| 1155 | IS 16530 : Part 4 : 2016/ISO 16100-4 : 2006 |
Industrial automation systems and integration - Manufacturing software capability profiling for interoperability: Part 4 conformance test methods, criteria and reports | 0 | Apr, 2021 | Buy | |
| 1156 | IS 16531 : 2022/ISO 14405-3:2016 (1 Revision) |
Biodiesel Diesel Fuel Blend B8 to B20 Specification First Revision of IS 16531 | 0 | ---- | Buy | |
| 1157 | IS 16558 : 2017/ISO 2790:2020 |
Belt drives - V - Belts for the automotive industry and corresponding pulleys - Dimensions | 0 | ---- | Buy | |
| 1158 | IS 16560 : 2017/ISO 7726 : 1998 |
Ergonomics of the Thermal Environment — Instruments for Measuring Physical Quantities | 0 | Nov, 2022 | Buy | |
| 1159 | IS 16561 : Part 6 : 2022/ISO/TS 17863:2013 |
ERGONOMIC DESIGN OF CONTROL CENTRES — PART 6: ENVIRONMENTAL REQUIREMENTS FOR CONTROL ROOMS | 0 | ---- | Buy | |
| 1160 | IS 16593 : Part 4 : 2022/ISO 4126-1:2013 (1 Revision) |
Arc welding equipment: Part 4 Periodic inspection and testing | 0 | ---- | Buy | |
| 1161 | IS 16593 : Part 13 : 2022/ISO 230-12:2022 |
Arc welding equipment Part 13: Welding current return clamp | 0 | ---- | Buy | |
| 1162 | IS 16595 : Part 302 : 2023/ISO 10263-6:2009 |
Ergonomics of human-system Interaction Part 302: Terminology for electronic visual displays ISO 9241-302 | 0 | ---- | Buy | |
| 1163 | IS 16605 : Part 2 : 2018/ISO 2982-2 : 2013 |
Rolling Bearings — Accessories Part 2 Dimensions for Locknuts and Locking Devices | 0 | ---- | Buy | |
| 1164 | IS 16608 : 2018/ISO 13482 : 2014 |
Robots and robotic devices - Safety requirements for personal care robots | 0 | Mar, 2024 | Buy | |
| 1165 | IS 16620 : 2017 |
Jig back movement monocable ropeways with fixed grips - Code of practice | 0 | Oct, 2022 | Download | |
| 1166 | IS 16623 : 2017 |
Pulsated movement monocable ropeways with fixed grips - Code of practice | 2 | Oct, 2022 | Download | |
| 1167 | IS 16637 : Part 1 : 2018/ISO 5610-1:2010 |
Tool holders with rectangular shank for indexable inserts: Part 1 General survey, correlation and determination of dimensions | 0 | Jun, 2023 | Buy | |
| 1168 | IS 16637 : Part 2 : 2018/ISO 5610-2 : 2010 |
Tool holders with rectangular shank for indexable inserts: Part 2 Style A | 0 | Jun, 2023 | Buy | |
| 1169 | IS 16637 : Part 4 : 2018/ISO 5610-4:2010 |
Tool holders with rectangular shank for indexable inserts: Part 4 Style D | 0 | Jun, 2023 | Buy | |
| 1170 | IS 16637 : Part 5 : 2018/ISO 5610-5:2010 |
Tool holders with rectangular shank for indexable inserts: Part 5 Style F | 0 | Jun, 2023 | Buy | |
| 1171 | IS 16637 : Part 6 : 2018/ISO 5610-6:2010 |
Tool holders with rectangular shank for indexable inserts: Part 6 Style G | 0 | Jun, 2023 | Buy | |
| 1172 | IS 16637 : Part 7 : 2018/ISO 5610-7:2010 |
Tool holders with rectangular shank for indexable inserts: Part 7 Style J | 0 | Jun, 2023 | Buy | |
| 1173 | IS 16637 : Part 8 : 2018/ISO 5610-8:2010 |
Tool holders with rectangular shank for indexable inserts: Part 8 Style K | 0 | Jun, 2023 | Buy | |
| 1174 | IS 16637 : Part 9 : 2018/ISO 5610-9:2010 |
Tool holders with rectangular shank for indexable inserts: Part 9 Style l | 0 | Jun, 2023 | Buy | |
| 1175 | IS 16637 : Part 10 : 2018/ISO 5610-10:2010 |
Tool Holders with rectangular shank for Indexable Inserts: Part 10 Style N | 0 | Jun, 2023 | Buy | |
| 1176 | IS 16637 : Part 11 : 2018/ISO 5610-11:2010 |
Tool holders with rectangular shank for indexable inserts: Part 11 Style R | 0 | Jun, 2023 | Buy | |
| 1177 | IS 16637 : Part 12 : 2018/ISO 5610-12:2010 |
Tool holders with rectangular shank for indexable inserts: Part 12 Style S | 0 | Jun, 2023 | Buy | |
| 1178 | IS 16637 : Part 13 : 2018/ISO 5610-13:2010 |
Tool holders with rectangular shank for indexable inserts: Part 13 Style T | 0 | Aug, 2024 | Buy | |
| 1179 | IS 16637 : Part 14 : 2018/ISO 5610-14:2010 |
Tool holders with rectangular shank for indexable inserts: Part 14 Style H | 0 | Jun, 2023 | Buy | |
| 1180 | IS 16637 : Part 15 : 2018/ISO 5610-15:2010 |
Tool holders with rectangular shank for indexable inserts: Part 15 Style V | 0 | Jun, 2023 | Buy | |
| 1181 | IS 16646 : 2017 |
Transportable refillable fully wrapped composite cylinders for liquefied petroleum gas (LPG) - Specification | 0 | Mar, 2022 | Download | |
| 1182 | IS 16701 : 2021/ISO 8430-3 : 2016 |
Geographic information — Web Feature Service | 0 | Aug, 2024 | Buy | |
| 1183 | IS 16727 : 2018/ISO 23480:2013 |
Tools for Pressing — Sliding Plates | 0 | May, 2023 | Buy | |
| 1184 | IS 16735 : 2018 |
Cylinders for on - Board Storage of Compressed Gasesous Hydrogen and Hydrogen Blends as a Fuel for Automative Vehicles - Specification | 0 | Feb, 2024 | Download | |
| 1185 | IS 16736 : 2020/ISO 3096 : 2018 (1 Revision) |
Rolling Bearings — Needle Rollers — Boundary Dimensions, Geometrical Product Specifications ( GPS ) and Tolerance Values ( First Revision ) | 0 | Apr, 2025 | Buy | |
| 1186 | IS 16739 : 2018/ISO 16622 : 2002 |
Meteorology - Sonic Anemometers/Thermometers Acceptance Test methods for Mean Wind Measurements | 0 | Jun, 2023 | Buy | |
| 1187 | IS 16740 : Part 1 : 2018/ISO 17713-1 : 2007 |
Meteorology - Wind Measurement Part 1 Wind Tunnel Test Methods for Rotating Anemometer Performance | 0 | Jun, 2023 | Buy | |
| 1188 | IS 16741 : 2018/ISO 17714 : 2007 |
Meterology -Air Temperature Measurements Test Methods for Comparing the Performance of Thermometer Shields/Screens and Defining Important Characteristics | 0 | Jun, 2023 | Buy | |
| 1189 | IS 16742 : 2018/ISO 12991:2012 |
Liquefied natural gas (LNG) - Tanks for on - Board storage as a fuel for automotive vehicles | 0 | Dec, 2023 | Buy | |
| 1190 | IS 16748 : 2018/ISO 13102 : 2012 |
Geometrical Product Specifications (GPS)-Dimensional Measuring Equipment Electronic Digital-Indicator Gauge-Design and Metrological Characteristics | 0 | Mar, 2023 | Buy | |
| 1191 | IS 16749 : 2018/ISO/TR 15916:2015 |
Basic Considerations for the Safety of Hydrogen Systems | 0 | Mar, 2024 | Buy | |
| 1192 | IS 16755 : 2018/ISO 16851:2012 |
Textiles conveyor belts - Determination of the net length of an endless (Spliced) conveyor belt | 0 | ---- | Buy | |
| 1193 | IS 16756 : 2018/ISO 10247 : 1990 |
Conveyor Belts - Characteristics of Covers - Classification | 0 | Aug, 2023 | Buy | |
| 1194 | IS 16758 : 2018/ISO 3684 |
Conveyor belts - Determination of minimum pulley diameter | 0 | Aug, 2023 | Buy | |
| 1195 | IS 16765 : 2019/ISO 14890-2013 |
Conveyor belts - Specification for rubber - Or plastics - Covered conveyor belts of textile construction for general use | 0 | Aug, 2023 | Buy | |
| 1196 | IS 16772 : 2018/ISO 16872:2015 |
Round steel short link chains for lifting purposes - Fine tolerance hoist chains for hand operated chain hoists - Grade vh | 0 | Feb, 2023 | Buy | |
| 1197 | IS 16773 : 2018/ISO 16877:2015 |
Round steel short link chains for lifting purposes - Fine tolerance hoist chains for hand operated chain hoists - Grade th | 0 | Feb, 2023 | Buy | |
| 1198 | IS 16793 : Part 1 : 2019/ISO 11900-1:2007 |
Tools for pressing - Ball - Lock punch retainers: Part 1 types A and B, rectangular and square for light duty | 0 | May, 2023 | Buy | |
| 1199 | IS 16793 : Part 2 : 2019/ISO 11900-2:2008 |
Tools for pressing - Ball - Lock punch retainers: Part 2 types C and D, reduced for light duty | 0 | May, 2023 | Buy | |
| 1200 | IS 16793 : Part 3 : 2018/ISO 11900-3:2004 |
Tools for pressing - Ball - Lock punch retainers: Part 3 type E, reduced for heavy duty | 0 | May, 2023 | Buy | |
| 1201 | IS 16794 : Part 1 : 2019/ISO 10242-1:2011 |
Tools for pressing - Punch holder shanks: Part 1 type A | 0 | May, 2023 | Buy | |
| 1202 | IS 16794 : Part 2 : 2019/ISO 10242-2:2008 |
Tools for pressing - Punch holder shanks: Part 2 type C | 0 | May, 2023 | Buy | |
| 1203 | IS 16795 : 2018/ISO 11415:1997 |
Tools for pressing - Die sets | 0 | May, 2023 | Buy | |
| 1204 | IS 16799 : 2018/ISO 8977:2003 |
Tools for pressing - Matrixes | 0 | May, 2023 | Buy | |
| 1205 | IS 16800 : Part 1 : 2018/ISO 9183-1:2008 |
Tools for pressing - Wear plates for press dies: Part 1 type A | 0 | May, 2023 | Buy | |
| 1206 | IS 16800 : Part 2 : 2018/ISO 9183-2:2008 |
Tools for pressing - Wear plates for press dies: Part 2 type B | 0 | ---- | Buy | |
| 1207 | IS 16806 : Part 1 : 2018/ISO 29042-1:2008 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 1 selection of test methods | 0 | Aug, 2023 | Buy | |
| 1208 | IS 16806 : Part 2 : 2018/ISO 29042-2:2009 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 2 tracer gas method for the measurement of the emission rate of a given pollutant | 0 | Aug, 2023 | Buy | |
| 1209 | IS 16806 : Part 3 : 2018/ISO 29042-3:2009 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 3 test bench method for the measurement of the emission rate of a given pollutant | 0 | Aug, 2023 | Buy | |
| 1210 | IS 16806 : Part 4 : 2018/ISO 29042-4:2009 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 4 tracer method for the measurement of the capture efficiency of an exhaust system | 0 | Aug, 2023 | Buy | |
| 1211 | IS 16806 : Part 5 : 2018/ISO 29042-5:2010 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 5 test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet | 0 | Aug, 2023 | Buy | |
| 1212 | IS 16806 : Part 6 : 2018/ISO 29042-6:2010 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 6 test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet | 0 | Aug, 2023 | Buy | |
| 1213 | IS 16806 : Part 7 : 2018/ISO 29042-7:2010 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 7 test bench method for the measurement of the pollutant concentration parameter | 0 | Aug, 2023 | Buy | |
| 1214 | IS 16806 : Part 8 : 2018/ISO 29042-8:2011 |
Safety of Machinery — Evaluation of the Emission of Airborne Hazardous Substances Part 8 Room Method for the Measurement of the Pollutant Concentration Parameter | 0 | Aug, 2023 | Buy | |
| 1215 | IS 16806 : Part 9 : 2018/ISO 29042-9:2011 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances: Part 9 decontamination index | 0 | Aug, 2023 | Buy | |
| 1216 | IS 16807 : 2020/ISO 19353 : 2019 (1 Revision) |
Safety of Machinery - Fire Prevention and Fire Protection (First Revision) | 0 | Jul, 2024 | Buy | |
| 1217 | IS 16808 : 2018/ISO 14159:2002 |
Safety of machinery - Hygiene requirements for the design of machinery | 0 | Aug, 2023 | Buy | |
| 1218 | IS 16809 : Part 1 : 2018/ISO 14122-1:2016 |
Safety of machinery - Permanent means of access to machinery: Part 1 choice of fixed means and general requirements of access | 0 | Aug, 2023 | Buy | |
| 1219 | IS 16809 : Part 2 : 2018/ISO 14122-2:2016 |
Safety of machinery - Permanent means of access to machinery: Part 2 working platforms and walkways | 0 | Aug, 2023 | Buy | |
| 1220 | IS 16809 : Part 3 : 2018/ISO 14122-3:2016 |
Safety of machinery - Permanent means of access to machinery: Part 3 stairs, stepladders and guard - Rails | 0 | Aug, 2023 | Buy | |
| 1221 | IS 16809 : Part 4 : 2018/ISO 14122-4:2016 |
Safety of machinery - Permanent means of access to machinery: Part 4 fixed ladders | 0 | Aug, 2023 | Buy | |
| 1222 | IS 16810 : Part 1 : 2018/ISO 13849-1:2015 |
Safety of machinery - Safety related parts of control systems: Part 1 general principles for design | 0 | Aug, 2023 | Buy | |
| 1223 | IS 16810 : Part 2 : 2018/ISO 13849-2:2012 |
Safety of machinery - Safety related parts of control systems: Part 2 validation | 0 | Aug, 2023 | Buy | |
| 1224 | IS 16811 : 2018/ISO 14120:2015 |
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards | 0 | Aug, 2023 | Buy | |
| 1225 | IS 16812 : 2018/ISO 14119:2013 |
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection | 0 | Aug, 2023 | Buy | |
| 1226 | IS 16813 : 2019/ISO 14118:2017 |
Safety of machinery - Prevention of unexpected start - Up | 0 | Aug, 2023 | Buy | |
| 1227 | IS 16815 : 2019/ISO 13855:2010 |
Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body | 0 | Aug, 2023 | Buy | |
| 1228 | IS 16816 : 2019/ISO 13854:2017 |
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body | 0 | Aug, 2023 | Buy | |
| 1229 | IS 16817 : 2020/ISO 13851:2019 (1 Revision) |
Safety of Machinery - Two-Hand Control Devices - Principles for Design and Selection (First Revision) | 0 | Jul, 2024 | Buy | |
| 1230 | IS 16818 : 2018/ISO 13850:2015 |
Safety of machinery - Emergency stop function - Principles for design | 0 | Aug, 2023 | Buy | |
| 1231 | IS 16819 : 2018/ISO 12100:2010 |
Safety of machinery - General principles for design - Risk assessment and risk reduction | 0 | Aug, 2023 | Buy | |
| 1232 | IS 16834 : Part 1 : 2018/ISO 14123-1:2015 |
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery: Part 1 principles and specifications for machinery manufacturers | 0 | Aug, 2023 | Buy | |
| 1233 | IS 16834 : Part 2 : 2018/ISO 14123-2:2015 |
Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery: Part 2 methodology leading to verification procedures | 0 | Aug, 2023 | Buy | |
| 1234 | IS 16835 : Part 1 : 2018/ISO 13856-1:2013 |
Safety of machinery - Pressure - Sensitive protective devices: Part 1 general principles for design and testing of pressure - Sensitive mats and pressure - Sensitive floors | 0 | Aug, 2023 | Buy | |
| 1235 | IS 16835 : Part 2 : 2018/ISO 13856-2:2013 |
Safety of machinery - Pressure - Sensitive protective devices: Part 2 general principles for design and testing of pressure - Sensitive edges and pressure - Sensitive bars | 0 | Aug, 2023 | Buy | |
| 1236 | IS 16835 : Part 3 : 2018/ISO 13856-3:2013 |
Safety of machinery - Pressure - Sensitive protective devices: Part 3 general principles for design and testing of pressure - Sensitive bumpers, plates, wires and similar devices | 0 | Aug, 2023 | Buy | |
| 1237 | IS 16856 : 2018/ISO 23813:2007 |
Cranes - Training of appointed persons | 0 | Nov, 2023 | Buy | |
| 1238 | IS 16857 : 2018/ISO 16715:2014 |
Cranes - Hand signals used with cranes | 0 | Nov, 2023 | Buy | |
| 1239 | IS 16860 : Part 1 : 2018/ISO 7296-1:1991 |
Cranes - Graphical symbols: Part 1 general | 0 | Nov, 2023 | Buy | |
| 1240 | IS 16860 : Part 3 : 2018/ISO 7296-3:2006 |
Cranes - Graphical symbols: Part 3 tower cranes | 0 | Nov, 2023 | Buy | |
| 1241 | IS 16865 : 2018/ISO 20332:2016 |
Cranes - Proof of Competence of Steel Structures | 0 | Nov, 2023 | Buy | |
| 1242 | IS 16866 : 2018/ISO 15513:2000 |
Cranes - Competency requirements for crane drivers (Operators), slingers, signallers and assessors | 0 | Nov, 2023 | Buy | |
| 1243 | IS 16898 : Part 1 : 2023/ISO 10071-1 : 2008 |
Basic Principles for Graphical Symbols for Use on Equipment Part 1: Creation of Graphical Symbols for Registration | 0 | ---- | Buy | |
| 1244 | IS 1691 : 1980 (2 Revision) |
Specification for cast iron and mild steel flat pulleys (Second Revision) | 0 | Mar, 2023 | Download | |
| 1245 | IS 16912 : 2018/ISO 21469:2006 |
Safety of machinery — Lubricants with incidental product contact — Hygiene requirements | 0 | Aug, 2023 | Buy | |
| 1246 | IS 16924 : 2018/ISO 6751:2011 |
Tools for Moulding -Ejector Pins with Cylindrical Head | 0 | May, 2023 | Buy | |
| 1247 | IS 16925 : 2018/ISO 8017 : 2007 |
Tools for Moulding - Guide Pillars, Straight and Shouldered, and Locating Guide Pillars, Shouldered | 0 | May, 2023 | Buy | |
| 1248 | IS 16926 : 2018/ISO 8018:2007 |
Tools for Moulding -Guide Bushes, Headed, and Locating Guide Bushes, Headed | 0 | May, 2023 | Buy | |
| 1249 | IS 16929 : 2018/ISO 8406 : 2008 |
Tools for Moulding - Mould Bases - Round Locating Elements and Spacers | 0 | May, 2023 | Buy | |
| 1250 | IS 16930 : 2018/ISO 8693 : 2011 |
Tools for Moulding - Flat Ejector Pins | 0 | May, 2023 | Buy | |
| 1251 | IS 16931 : 2018/ISO 8694 : 2011 |
Tools for Moulding - Shouldered Ejector Pins | 0 | May, 2023 | Buy | |
| 1252 | IS 16932 : 2018/ISO 9449 : 2007 |
Tools for Moulding - Centring Sleeves | 0 | May, 2023 | Buy | |
| 1253 | IS 16933 : 2018/ISO 10072:2004 |
Tools for Moulding - Sprue Bushes - Dimensions | 0 | May, 2023 | Buy | |
| 1254 | IS 16934 : 2018/ISO 10073 : 2008 |
Tools for Moulding - Support Pillars | 0 | May, 2023 | Buy | |
| 1255 | IS 16935 : Part 1 : 2018/ISO 10907-1:2008 |
Tools for Moulding - Locating Rings Part 1 Locating Rings for Mounting without Thermal Insulating Sheets in Small or Medium Moulds (Type A and B) | 0 | May, 2023 | Buy | |
| 1256 | IS 16935 : Part 2 : 2018/ISO 10907-2 : 2007 |
Tools for Moulding - Locating Rings Part 2 Locating Rings for Mounting with Thermal Insulating Sheets in Small or Medium Moulds (Types C and D) | 0 | May, 2023 | Buy | |
| 1257 | IS 16988 : 2018 |
Compressed natural gas cylinder valve integrated with solenoid operation (Remotely Controlled) for automotive use - Specification | 2 | Mar, 2024 | Download | |
| 1258 | IS 16992 : Part 1 : 2018/ISO 13399-1 : 2006 |
Cutting tool data representation and exchange: Part 1 Overview, fundamental principles and general information model | 0 | Jun, 2023 | Buy | |
| 1259 | IS 17003 : Part 3 : 2022/ISO 11120 : 2015 |
Nanotechnologies Vocabulary Part 3: Carbon nano-objects | 0 | ---- | Buy | |
| 1260 | IS 17003 : Part 8 : 2022 |
Nanotechnologies Vocabulary Part 8: Nanomanufacturing processes | 0 | ---- | Download | |
| 1261 | IS/ISO 1701-1 : 2004/ISO 1701-1 : 2004 |
Test conditions for milling machines with table of variable height - Testing of the accuracy: Part 1 machines with horizontal spindle | 0 | Mar, 2021 | Buy | |
| 1262 | IS/ISO 1701 : Part 2 : 2004/ISO 1701-2 : 2004 |
Test Conditions for Milling Machines with Table of Variable Height - Testing of Accuracy Part 2 Machines with Vertical Spindle | 0 | Sep, 2024 | Buy | |
| 1263 | IS/ISO/IEC/TS 17021 : Part 11 : 2018/ISO/TR 20218-2:2017 |
Conformity assessment Requirements for bodies providing audit and certification of management systems Part 11: Competence requirements for auditing and certification of facility management FM management systems | 0 | ---- | Buy | |
| 1264 | IS 17024 : Part 2 : 2018/ISO 8688-2 : 1989 |
Tool life testing in milling: Part 2 End milling | 0 | Jun, 2023 | Buy | |
| 1265 | IS 17025 : 2018/ISO 15641 : 2001 |
Milling cutters for high speed machining -- Safety requirements | 0 | Jun, 2023 | Buy | |
| 1266 | IS 17026 : 2018/ISO 22037 : 2007 |
Solid end mills with corner radii and cylindrical shanks made of hard cutting materials -- Dimensions | 0 | Jun, 2023 | Buy | |
| 1267 | IS 17027 : 2018/ISO 16463 : 2014 |
Polycrystalline diamond inserts, tipped -- Dimensions, types | 0 | Jun, 2023 | Buy | |
| 1268 | IS 17028 : 2018/ISO 15917 : 2012 |
Solid ball -- Nosed end mills with cylindrical shanks, made of carbide and ceramic materials | 0 | Jun, 2023 | Buy | |
| 1269 | IS 17047 : Part 1 : 2018/ISO 8688-1 : 1989 |
Tool life testing in milling: Part 1 Face milling | 0 | Jun, 2023 | Buy | |
| 1270 | IS 17055 : Part 1 : 2019 (1 Revision) |
Earth-Moving Machinery - Safety Part 1 General Requirements | 1 | Mar, 2024 | Download | |
| 1271 | IS 17055 : Part 2 : 2020 (2 Revision) |
Earth-Moving Machinery - Safety Part 2 Requirements for Tractor Dozers (second revision) | 0 | ---- | Download | |
| 1272 | IS 17055 : Part 3 : 2018/20474 Part 3 :2017 |
Earth - Moving machinery - Safety: Part 3 requirements for loaders | 0 | Dec, 2023 | Buy | |
| 1273 | IS 17055 : Part 4 : 2020 (2 Revision) |
Earth-Moving Machinery — Safety Part 4 Requirements for Backhoe Loaders ( Second Revision ) | 0 | ---- | Download | |
| 1274 | IS 17055 : Part 5 : 2018/ISO 20474 Part 5:201 |
Earth - Moving machinery - Safety: Part 5 requirements for hydraulic excavators | 0 | Dec, 2023 | Buy | |
| 1275 | IS 17055 : Part 7 : 2020 (2 Revision) |
Earth-Moving Machinery — Safety Part 7 Requirements for Scrapers ( Second Revision ) | 0 | ---- | Download | |
| 1276 | IS 17055 : Part 8 : 2020 (2 Revision) |
Earth-Moving Machinery — Safety Part 8 Requirements For Graders ( Second Revision ) | 0 | ---- | Download | |
| 1277 | IS 17055 : Part 9 : 2020 (2 Revision) |
Earth-Moving Machinery — Safety Part 9 Requirements for Pipelayers ( Second Revision ) | 0 | ---- | Download | |
| 1278 | IS 17055 : Part 10 : 2020 (2 Revision) |
Earth-Moving Machinery — Safety Part 10 Requirements for Trenchers ( Second Revision ) | 0 | ---- | Download | |
| 1279 | IS 17055 : Part 11 : 2020 (2 Revision) |
Earth-Moving Machinery — Safety Part 11 Requirements for Earth and Landfill Compactors ( Second Revision ) | 0 | ---- | Download | |
| 1280 | IS 17055 : Part 12 : 2020 (2 Revision) |
Earth-Moving Machinery — Safety Part 12 Requirements for Cable Excavators ( Second Revision ) | 0 | ---- | Download | |
| 1281 | IS 17055 : Part 13 : 2020 (2 Revision) |
Earth-Moving Machinery — Safety Part 13 Requirements for Rollers ( Second Revision ) | 0 | ---- | Download | |
| 1282 | IS 17055 : Part 15 : 2020/iso 20474-15 |
Earth-Moving Machinery — Safety Part 15 Requirements for Compact Tool Carriers | 0 | ---- | Buy | |
| 1283 | IS 17056 : 2019/ISO 282 : 1992 |
Conveyor Belts — Sampling | 0 | Mar, 2024 | Buy | |
| 1284 | IS/ISO/IEC 17060 : 2022/ISO 8000-150 |
Conformity assessment Code of good practice | 0 | ---- | Buy | |
| 1285 | IS/ISO 17063 : 2003/ISO 17063 : 2003 |
Earth - Moving machinery - Braking systems of pedestrian - Controlled machines - Performance requirements and test procedures | 0 | ---- | Buy | |
| 1286 | IS 17080 : Part 1 : 2019 |
Automatic Gravimetric Filling Instruments Part 1 Terminology and Definitions | 0 | Apr, 2024 | Download | |
| 1287 | IS 17082 : 2019 |
Guidelines for Design and Construction of Continuous Pusher Type Oil / Gas Top Fired Reheating Furnaces | 0 | Mar, 2024 | Download | |
| 1288 | IS 17083 : Part 1 : 2019/ISO 14617-1:2005 |
Graphical symbols for diagrams: Part 1 General information and indexes | 0 | Aug, 2023 | Buy | |
| 1289 | IS 17083 : Part 2 : 2019/ISO 14617-2 : 2002 |
Graphical symbols for diagrams: Part 2 Symbols having general application | 0 | Aug, 2023 | Buy | |
| 1290 | IS 17083 : Part 3 : 2019/ISO 14617-3:2002 |
Graphical symbols for diagrams: Part 3 Connections and related devices | 0 | Aug, 2023 | Buy | |
| 1291 | IS 17083 : Part 4 : 2019/ISO 14617-4:2002 |
Graphical symbols for diagrams: Part 4 Actuators and related devices | 0 | Aug, 2023 | Buy | |
| 1292 | IS 17083 : Part 5 : 2019/ISO 14617-15:2002 |
Graphical symbols for diagrams: Part 5 Measurement and control devices | 0 | Aug, 2023 | Buy | |
| 1293 | IS 17083 : Part 6 : 2019/ISO 14617-6:2002 |
Graphical symbols for diagrams: Part 6 Measurement and control functions | 0 | Aug, 2023 | Buy | |
| 1294 | IS 17083 : Part 7 : 2019/ISO 14617-7:2002 |
Graphical symbols for diagrams: Part 7 Basic mechanical components | 0 | Aug, 2023 | Buy | |
| 1295 | IS 17083 : Part 8 : 2019/ISO 14617-8:2002 |
Graphical symbols for diagrams: Part 8 Valves and dampers | 0 | Aug, 2023 | Buy | |
| 1296 | IS 17083 : Part 9 : 2019/ISO 14617-9:2002 |
Graphical symbols for diagrams: Part 9 Pumps, compressors and fans | 0 | Aug, 2023 | Buy | |
| 1297 | IS 17083 : Part 10 : 2019/ISO 14617-10:2002 |
Graphical symbols for diagrams: Part 10 Fluid power converters | 0 | Aug, 2023 | Buy | |
| 1298 | IS 17083 : Part 11 : 2019/ISO 14617-11:2002 |
Graphical symbols for diagrams: Part 11 Devices for heat transfer and heat engines | 0 | Aug, 2023 | Buy | |
| 1299 | IS 17083 : Part 12 : 2019/ISO 14617-12:2002 |
Graphical symbols for diagrams: Part 12 Devices for separating, purification and mixing | 0 | Aug, 2023 | Buy | |
| 1300 | IS 17083 : Part 13 : 2019/ISO 14617-13:2004 |
Graphical symbols for diagrams: Part 13 Devices for material processing | 0 | Aug, 2023 | Buy | |
| 1301 | IS 17083 : Part 14 : 2019/ISO 14617-14:2004 |
Graphical symbols for diagrams: Part 14 Devices for transport and handling of material | 0 | Aug, 2023 | Buy | |
| 1302 | IS 17083 : Part 15 : 2019/ISO 14617-15:2002 |
Graphical symbols for diagrams: Part 15 Installation diagrams and network map | 0 | Aug, 2023 | Buy | |
| 1303 | IS 17089 : 2019/ISO 433 : 2017 |
Conveyor Belts — Markings | 0 | Aug, 2023 | Buy | |
| 1304 | IS 17097 : 2019/ISO 6106 : 2013 |
Abrasive products - Checking the grain size of superabrasives | 0 | Jun, 2023 | Buy | |
| 1305 | IS 17113 : Part 6 : 2022/ISO 8000-63 : 2019 |
Microbiology of the food chain - Method validation - Part 6: Protocol for the validation of alternative proprietary methods for microbiological confirmation and typing procedures | 0 | ---- | Buy | |
| 1306 | IS 17114 : 2019/ISO 251 |
Conveyor belts with textile carcass - Widths and lengths | 0 | Aug, 2023 | Buy | |
| 1307 | IS 17118 : Part 4 : 2022/ISO 19880-3 : 2018 |
INDOOR AIR PART: 4 DETERMINATION OF FORMALDEHYDE DIFFUSIVE SAMPLING METHOD | 0 | ---- | Buy | |
| 1308 | IS 17118 : Part 37 : 2022/ISO 19880-5 : 2019 |
INDOOR AIR PART 37: MEASUREMENT OF PM 2.5 MASS CONCENTRATION | 0 | ---- | Buy | |
| 1309 | IS 17141 : Part 1 : 2019/ISO 4266-1: 2002 |
Petroleum and Liquid Petroleum Products — Measurement of Level and Temperature in Storage Tanks by Automatic Methods Part 1 Measurement of Level in Atmospheric Tanks | 0 | Apr, 2024 | Buy | |
| 1310 | IS 17141 : Part 2 : 2019/ISO 4266-2:2002 |
Petroleum and Liquid Petroleum Products — Measurement of Level and Temperature in Storage Tanks by Automatic Methods Part 2 Measurement of Level in Marine Vessels | 0 | Apr, 2024 | Buy | |
| 1311 | IS 17141 : Part 4 : 2019/ISO 4266-4:2002 |
Petroleum and Liquid Petroleum Products — Measurement of Level and Temperature in Storage Tanks by Automatic Methods Part 4 Measurement of Temperature in Atmospheric Tanks | 0 | Apr, 2024 | Buy | |
| 1312 | IS 1715 : 2002 (3 Revision) |
Self-holding tapers -- Dimensions (third revision) | 0 | Aug, 2024 | Download | |
| 1313 | IS 17166 : 2019/ISO 15787:2016 |
Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications | 0 | Aug, 2023 | Buy | |
| 1314 | IS 17167 : 2019/ISO 15226:1999 |
Technical product documentation -- Life cycle model and allocation of documents | 0 | Aug, 2023 | Buy | |
| 1315 | IS 17170 : Part 1 : 2019/ISO 10628-1:2014 |
Diagrams for the chemical and petrochemical industry: Part 1 Specification of diagrams | 0 | Aug, 2023 | Buy | |
| 1316 | IS 17170 : Part 2 : 2019/ISO 10628-2:2012 |
Diagrams for the chemical and petrochemical industry: Part 2 Graphical symbols | 0 | Aug, 2023 | Buy | |
| 1317 | IS 17171 : 2019/ISO 3766:2003 |
Construction drawings -- Simplified representation of concrete reinforcement | 0 | Aug, 2024 | Buy | |
| 1318 | IS 17173 : 2019/ISO 11091:1994 |
Construction drawings -- Landscape drawing practice | 0 | Aug, 2023 | Buy | |
| 1319 | IS 17192 : Part 1 : 2019/ISO 18646-1 |
Robotics — Performance Criteria and Related Test Methods for Service Robots Part 1 Locomotion for Wheeled Robots | 0 | Aug, 2023 | Buy | |
| 1320 | IS 17192 : Part 4 : 2023/ISO 16610-32 : 2023 |
Robotics Performance criteria and related test methods for service robots Part 4: Lower-back support robots | 0 | ---- | Buy | |
| 1321 | IS 17193 : 2019/ISO/TS 15066 : 2016 |
Robots and Robotic Devices — Collaborative Robots | 0 | Aug, 2023 | Buy | |
| 1322 | IS 17196 : 2023/ISO 21223 : 2019 (1 Revision) |
Routine analytical cigarette smoking machine - Additional test methods for machine verification | 0 | ---- | Buy | |
| 1323 | IS 17204 : 2019/ISO 22917 : 2016 |
Precision Superabrasives — Limit Deviations and Run-out Tolerances for Grinding Wheels with Diamond or Cubic Boron Nitride | 0 | Jun, 2023 | Buy | |
| 1324 | IS 17206 : 2019/ISO 16057 : 2002 |
Coated Abrasives — Vulcanized Fibre Discs | 0 | Jun, 2023 | Buy | |
| 1325 | IS 17207 : Part 1 : 2019/ISO 21537 -1: 2004 |
Clamping Flanges for Superabrasive Cutting-off Wheels Part 1 Natural Stone | 0 | ---- | Buy | |
| 1326 | IS 17207 : Part 2 : 2019/ISO 21537 -2: 2004 |
Clamping Flanges for Superabrasive Cutting-off Wheels Part 2 Building and Construction | 0 | Jun, 2023 | Buy | |
| 1327 | IS 17215 : 2019 |
Fluid Power System ― Hexagon Socket Screw Plugs with Parallel Screw Threads with Elastomeric Sealing ― Specification | 0 | ---- | Download | |
| 1328 | IS 17219 : Part 1 : 2019/ISO 11901-1:2003 |
Tools for Pressing — Gas Springs Part 1 General Specifications | 0 | May, 2023 | Buy | |
| 1329 | IS 17219 : Part 3 : 2022/ISO 24393 : 2008 (2 Revision) |
Tools for pressing Gas springs Part 3: Gas spring with increased spring force and compact built height | 0 | ---- | Buy | |
| 1330 | IS 17220 : 2019/ISO 11903:2008 |
Tools for Pressing — Guide Pillar Mountings | 0 | May, 2023 | Buy | |
| 1331 | IS 17221 : 2022/ISO 8000-64 : 2022 (1 Revision) |
Tools for moulding — Components of compression and injection moulds and die casting dies — List of equivalent terms and symbols ( First Revision ) | 0 | ---- | Buy | |
| 1332 | IS 17222 : 2019/ISO 15600:2000 |
Tools for Moulding — Thermal Insulating Sheets for Injection Moulds | 0 | May, 2023 | Buy | |
| 1333 | IS 17223 : 2019/ISO 16366:2008 |
Tools for Pressing — L-Shaped Guides | 0 | May, 2023 | Buy | |
| 1334 | IS 17224 : 2019/ISO 16367:2008 |
Tools for Pressing — Guide plates — U- and V-blocks | 0 | May, 2023 | Buy | |
| 1335 | IS 17225 : 2019/ISO 16915:2003 |
Tools for Moulding — Sprue Pullers | 0 | May, 2023 | Buy | |
| 1336 | IS 17226 : 2019/ISO 16916:2016 |
Tools for Moulding — Tool Specification Sheet for Injection Moulds | 0 | May, 2023 | Buy | |
| 1337 | IS 17227 : 2019/ISO 18084:2011 |
Press Tools for Tablets — Punches and Dies | 0 | May, 2023 | Buy | |
| 1338 | IS 17228 : 2019/ISO 24233:2008 |
Tools for Moulding — Tool Specification Sheet for Diecasting Dies | 0 | May, 2023 | Buy | |
| 1339 | IS 17229 : 2019/ISO 28238:2010 |
Compression and Injection Moulds — Components for Gating Systems | 0 | May, 2023 | Buy | |
| 1340 | IS 17232 : 2019 |
Continuous Movement Bicable/Tricable Ropeways with Detachable Grip - Code of Practice | 1 | Nov, 2023 | Download | |
| 1341 | IS 17233 : 2019 |
Acceptance and Certification Criteria for Design and Construction of All Types of Ropeways Intended for Transportation of Passengers | 1 | Nov, 2023 | Download | |
| 1342 | IS 17234 : 2019 |
Operation and Maintenance of All Types of Ropeways Intended for Transportation of Passengers - Code of Practice | 0 | Nov, 2023 | Download | |
| 1343 | IS 17235 : 2019 |
Magnetic Rope Testing (MRT) - Specification | 0 | ---- | Download | |
| 1344 | IS 17236 : 2019 |
Prevention and Safety Against Fire in Ropeways - Code of Practice | 0 | Nov, 2023 | Download | |
| 1345 | IS 17237 : 2019 |
Code of Practice for Design and Construction of Civil Engineering Works for Ropeways - General Requirements | 1 | Nov, 2023 | Download | |
| 1346 | IS 17238 : 2019 |
Safety Requirements for Ropeways Installations Designed to Carry Persons - Quality Control | 1 | Nov, 2023 | Download | |
| 1347 | IS 17239 : 2019 |
Safety Requirements for Drives Used for Ropeway Installation for Passenger Transportation | 1 | Nov, 2023 | Download | |
| 1348 | IS 17240 : 2019 |
Corrosion Protection of Iron and Steel Sections Used in Passenger Ropeways - Code of Practice | 1 | Nov, 2023 | Download | |
| 1349 | IS 17241 : 2019 |
Man Riding Car by Rope Haulage System for Transportation of Persons in Mines | 0 | Aug, 2024 | Download | |
| 1350 | IS 17242 : 2019 |
Man Riding Chair Lift System for Transportation of Persons in Mines | 0 | Aug, 2024 | Download | |
| 1351 | IS 17246 : 2019/ISO 3190 : 1975 |
Test Conditions for Turret and Single Spindle Co-ordinate Drilling Machines with Vertical Spindle — Testing of the Accuracy | 0 | May, 2023 | Buy | |
| 1352 | IS 17247 : Part 1 : 2019/ISO 3686-1 : 2000 |
Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle — Testing of the Accuracy Part 1 Single Column Type Machines | 0 | May, 2023 | Buy | |
| 1353 | IS 17247 : Part 2 : 2019/ISO 3686-2:2000 |
Test Conditions for High Accuracy Turret and Single Spindle Coordinate Drilling and Boring Machines with Table of Fixed Height with Vertical Spindle — Testing of the Accuracy Part 2 Portal Type Machines with Moving Table | 0 | May, 2023 | Buy | |
| 1354 | IS 17248 : 2019/ISO 8956 : 1986 |
Acceptance Conditions for Copying Attachments, Integral or Otherwise, for Lathes — Testing of the Accuracy | 0 | May, 2023 | Buy | |
| 1355 | IS 17249 : Part 1 : 2019/ISO 11090-1:2014 |
Test Conditions for Die Sinking Electro-Discharge Machine ( Die Sinking EDM ) — Testing of the Accuracy Part 1 Single-Column Machines ( Cross-slide Table Type and Fixed-Table Type ) | 0 | May, 2023 | Buy | |
| 1356 | IS 17250 : 2019/ISO 14137 : 2015 |
Test Conditions for Wire Electrical- Discharge Machines ( Wire EDM ) — Testing of the Accuracy | 0 | May, 2023 | Buy | |
| 1357 | IS 17251 : Part 1 : 2019/ISO 14955-1 : 2017 |
Machine Tools — Environmental Evaluation of Machine Tools Part 1 Design Methodology for Energy-Efficient Machine Tools | 0 | May, 2023 | Buy | |
| 1358 | IS 17251 : Part 2 : 2019/ISO 14995-2:2017 |
Machine Tools - Environmental Evaluation of Machine Tools Part 2 Methods for Measuring Energy Supplied to Machine Tools and Machine Tool Components | 0 | May, 2023 | Buy | |
| 1359 | IS 17252 : Part 1 : 2019/ISO 15616-1 : 2003 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 1 General Principles, Acceptance Conditions | 0 | May, 2023 | Buy | |
| 1360 | IS 17252 : Part 2 : 2019/ISO 15616-2:2003 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 2 Measurement of Static and Dynamic Accuracy | 0 | May, 2023 | Buy | |
| 1361 | IS 17252 : Part 3 : 2020/ISO 15616-3 : 2003 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 3 Calibration of Instruments for Measurement of Gas Flow and Pressure | 0 | Sep, 2024 | Buy | |
| 1362 | IS 17252 : Part 4 : 2020/ISO 15616-4:2003 |
Acceptance Tests for CO2-laser Beam Machines for High Quality Welding and Cutting Part 4 Machines with 2-D Moving Optics | 0 | Sep, 2024 | Buy | |
| 1363 | IS 17254 : 2019/ISO 16093 : 2017 |
Machine Tools — Safety — Sawing Machines for Cold Metal | 0 | May, 2023 | Buy | |
| 1364 | IS 17255 : 2019/ISO 16907 : 2015 |
Machine Tools — Numerical Compensation of Geometric Errors | 0 | May, 2023 | Buy | |
| 1365 | IS 17256 : Part 1 : 2019/ISO 17243-1 : 2014 |
Machine Tool Spindles — Evaluation of Machine Tool Spindle Vibrations by Measurements on Spindle Housing Part 1 Spindles with Rolling Element Bearings and Integral Drives Operating at Speeds Between 600 min-1 and 30 000 min-1 | 0 | May, 2023 | Buy | |
| 1366 | IS 17256 : Part 2 : 2019/ISO 17243-2 : 2017 |
Machine Tool Spindles — Evaluation of Spindle Vibrations by Measurements on non-rotating parts Part 2 Direct-Driven Spindles and Belt-Driven Spindles with Rolling Element Bearings Operating at Speeds Between 600 r / min and 30 000 r / min | 0 | May, 2023 | Buy | |
| 1367 | IS 17258 : 2019/ISO 23125 : 2015 |
Machine Tools — Safety — Turning Machines | 0 | May, 2023 | Buy | |
| 1368 | IS 17259 : 2020/ISO 28881 : 2013 |
Machine Tools — Safety — Electro-Discharge Machines | 0 | Sep, 2024 | Buy | |
| 1369 | IS 17267 : 2019/ISO 16281 : 2008 |
Rolling Bearings - Methods for Calculating the Modified References Rating Life for Universally Loaded Bearings | 0 | ---- | Buy | |
| 1370 | IS 17276 : 2019/ISO 15243 : 2017 |
Rolling Bearings - Damage and Failures - Terms, Characteristics and Causes | 0 | May, 2023 | Buy | |
| 1371 | IS 17277 : Part 1 : 2019/ ISO 16092-1:2017 |
Machine Tools Safety — Presses Part 1 General Safety Requirements | 0 | May, 2023 | Buy | |
| 1372 | IS 17328 : Part 3 : 2021/2408 |
Nuclear fuel technology — Determination of uranium : Part 3 Determination of uranium in uranyl nitrate solutions of nuclear grade quality — Gravimetric method | 0 | ---- | Buy | |
| 1373 | IS 17378 : 2021/IEC 62135-1 : 2015 |
Test method for determination of major elements in ash from coal and coke by flame atomic absorption spectroscopic method | 0 | ---- | Buy | |
| 1374 | IS 17403 : 2020 |
Magnalium for Explosives and Pyrotechnic Composition — Specification | 0 | Mar, 2025 | Download | |
| 1375 | IS 17405 : 2020 |
Calculation for Design of Ropeway Installation Intended for Transportation of Passengers — Code of Practice | 0 | Jan, 2025 | Download | |
| 1376 | IS 17406 : 2020 |
Transportation, Storage, Installation and Tensioning of Wire Ropes for Passenger Ropeway — Code of Practice | 0 | Jan, 2025 | Download | |
| 1377 | IS 17437 : 2020/ISO 19649:2017 |
Mobile Robots — Vocabulary | 0 | ---- | Buy | |
| 1378 | IS 17459 : 2021/ISO TR 22100-3 : 2013 |
PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT (Adoption of ISO 17932 : 2011) | 0 | ---- | Buy | |
| 1379 | IS 17479 : 2023/ISO 6165:2022 (1 Revision) |
Textile Floor Covering - Carpet Tiles Made of Synthetic Yarn Specification | 0 | ---- | Buy | |
| 1380 | IS 17522 : 2021/22878 |
Castors and Wheels -Test Methods and Apparatus | 0 | ---- | Buy | |
| 1381 | IS 17523 : 2021/22879 |
Castors and Wheels - Requirements for Castors for Furniture | 0 | ---- | Buy | |
| 1382 | IS 17524 : 2021/22880 |
Castors and Wheels - Requirements for Castors for Swivel Chairs | 0 | ---- | Buy | |
| 1383 | IS 17576 : 2021/ISO 5182 : 2016 |
HVDC installations Guidelines on asset management | 0 | ---- | Buy | |
| 1384 | IS 1759 : 1986 (2 Revision) |
Specification for powrahs (Second Revision) | 2 | Jan, 2025 | Download | |
| 1385 | IS 17614 : Part 15 : 2021 |
Water quality -Sampling- Part 15 Guidance on the preservation and handling of sludge and sediment samples | 0 | ---- | Download | |
| 1386 | IS 17614 : Part 23 : 2021/ISO 10360-10:2021 |
Water Quality Sampling Part 23 Guidance on Passive Sampling in Surface Waters | 0 | ---- | Buy | |
| 1387 | IS 1764 : 1961 |
Specification for trough compass | 0 | Mar, 2021 | Download | |
| 1388 | IS 17650 : Part 2 : 2021/ISO 18646-4 : 2021 |
Water efficient plumbing products - Requirements: Part 2 Sanitary fittings | 0 | ---- | Buy | |
| 1389 | IS 17658 : 2021/IEC 60974-7 : 2019 |
Polyvinyl chloride (pvc) homopolymers - Specification | 0 | ---- | Buy | |
| 1390 | IS 17661 : Part 3 : 2022/ISO 10209:2022 |
Ships and marine technology Marine NOX Reduction Agent AUS 40 Part 3: Handling transportation and storage | 0 | ---- | Buy | |
| 1391 | IS 17709 : 2022 |
Cardiac defibrillators Connector assembly DF-1 for implantable defibrillators Dimensions and test requirements | 0 | ---- | Buy | |
| 1392 | IS 17722 : 2021 |
Guidance for supervisors and operators of point-of-care testing POCT devices | 0 | ---- | Download | |
| 1393 | IS 17734 : 2022/ISO/TS 17865:2016 |
PVC/Latex Tufted Coir Mats - Specification | 0 | ---- | Buy | |
| 1394 | IS 17740 : 2022/ISO 16610-41: 2015 |
Isolated Towers, Masts and Poles using Structural Steel - Code of Practice | 0 | ---- | Buy | |
| 1395 | IS/ISO 17745 : 2016/ ISO 17745 |
Steel Wire Ring Net Panels — Definitions and Specifications | 0 | ---- | Buy | |
| 1396 | IS/ISO 17746 : 2016/ ISO 17746 |
Steel Wire Ring Net Panels — Definitions and Specifications | 0 | ---- | Buy | |
| 1397 | IS 17753 : 2021/ISO 14253-5:2015 |
Paperbased Multilayer Laminated/Extruded Composite Cartons (Aseptic and Non-Aseptic) for Processed Liquid Food Products and Beverages — Specification | 2 | ---- | Buy | |
| 1398 | IS/ISO/IEC 17788 : 2014/ISO 19880-8 : 2019 |
Information technology Cloud computing Overview and vocabulary | 0 | ---- | Buy | |
| 1399 | IS 17789 : 2022/ISO 23632: 2021 |
Gas oil - Specification | 1 | ---- | Buy | |
| 1400 | IS 1779 : 1961 |
Specification for 4 - Metre, levelling staff, folding type | 0 | Mar, 2021 | Download | |
| 1401 | IS 17792 : 2022/ISO 4126-3: 2020 |
Vacuum gas oil VGO - Specification | 0 | ---- | Buy | |
| 1402 | IS 17805 : Part 2 : 2022/ISO 3529-2:2020 |
Electrical requirements for lifts escalators and moving walks Part 2 Electromagnetic compatibility with regard to immunity | 0 | ---- | Buy | |
| 1403 | IS 17807 : Part 1 : 2022/ISO 3529-3: 2014 |
Textiles Qualitative and quantitative analysis of some cellulose fibres lyocell cupro and their blends Part 1: Fibre identification using scanning electron microscopy and spectral analysis methods | 0 | ---- | Buy | |
| 1404 | IS 1781 : 2022/ISO 16610-61 : 2015 (2 Revision) |
Urea , technical - Specification (Second Revision) | 1 | ---- | Buy | |
| 1405 | IS 17815 : Part 2 : 2022/ISO 21360 (Part 1) |
Textiles Determination of certain flame retardants Part 2: Phosphorus flame retardants | 0 | ---- | Buy | |
| 1406 | IS 17841 : Part 2 : 2022/ISO 14344:2010 |
Cardiovascular Implants Endovascular Devices Part 2 Vascular Stents First Revision | 0 | ---- | Buy | |
| 1407 | ISIHB MMAW : 1965 |
ISI Handbook of Manual Metal-arc Welding for Welders | 0 | Jan, 2019 | Download | |
| 1408 | IS 17866 : 2022/ISO 21250-1 : 2020 |
Textile machinery and accessories Bars for drop wires for electrical warp stop motions | 0 | ---- | Buy | |
| 1409 | IS 17867 : Part 2 : 2022/ISO 16610-1: 2015 |
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 2: Connecting dimensions for yarn feeders and yarn control devices | 0 | ---- | Buy | |
| 1410 | IS 17867 : Part 3 : 2022/ISO 16610-31:2016 |
Textile machinery and accessories Yarn feeders and yarn control for knitting machines Part 3: Dimensions for connecting and interconnection cables | 0 | ---- | Buy | |
| 1411 | IS 17868 : 2022/ISO 25178-73:2019 |
Spinning preparatory spinning and doubling twisting machinery Tubes for ring-spinning doubling and twisting spindles taper 1:38 and 1:64 | 0 | ---- | Buy | |
| 1412 | IS 17900 : Part 3 : Sec 1 : 2023/ISO 129-5 : 2018 |
Lifts for the Transport of Persons and Goods: Part 3 Specifications for Planning and Selection Section 1 PassengerServiceHospital BedStretcher Lifts | 0 | ---- | Buy | |
| 1413 | IS 17902 : 2022/ISO 9809-2 : 2019 |
Animal feeding stuffs Determination of amylase-treated neutral detergent fibre content ANDF | 0 | ---- | Buy | |
| 1414 | IS 17903 : 2022/ISO 11515 : 2022 |
Animal feeding stuffs Determination of acid detergent fibre ADF and acid detergent lignin ADL contents | 0 | ---- | Buy | |
| 1415 | IS 17907 : 2022/ISO 21920-3:2021 |
DOMESTIC METHANOL COOKSTOVE-CANISTER TYPE | 0 | ---- | Buy | |
| 1416 | IS 17932 : Part 1 : 2023/ISO 7755-1:2013 |
Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process (ISO 10993-1 : 2018, MOD) | 0 | ---- | Buy | |
| 1417 | IS 17938 : 2022/ISO 8000-2 : 2022 |
Design and Construction of Funicular Railway Code of Practice | 0 | ---- | Buy | |
| 1418 | IS 17991 : 2022/ISO 16610-49 : 2015 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for hardness of monolithic ceramics at room temperature | 0 | ---- | Buy | |
| 1419 | IS/ISO/IEC 17991 : 2021/ISO 4378-4:2009 |
Information technology Office equipment Method for Measuring Scanning Productivity of Digital Multifunctional Devices | 0 | ---- | Buy | |
| 1420 | IS/ISO/IEC 18033 : Part 1 : 2021/ISO/TS 19837:2018 (1 Revision) |
Information Security - Encryption Algorithms Part 1: General (First Revision) | 0 | ---- | Buy | |
| 1421 | IS 18057 : Part 3 : 2023 |
Woodworking Machines Safety Part 3: Numerically Controlled NC Boring and Routing Machines | 0 | ---- | Download | |
| 1422 | IS 18058 : 2023/ISO 21815-1 : 2022 |
Guidelines for Supervisory Control and Data Acquisition (SCADA) System Displays | 1 | ---- | Buy | |
| 1423 | IS 18060 : 2022/ISO 8000-82 : 2022 |
PLASTICS DETERMINATION OF THE ULTIMATE ANAEROBIC BIODEGRADATION OF PLASTIC MATERIALS IN CONTROLLED SLURRY DIGESTION SYSTEMS METHOD BY MEASUREMENT OF BIOGAS PRODUCTION | 0 | ---- | Buy | |
| 1424 | IS 18062 : 2023/ISO 10110-9:2016 |
OIL OF TAGETES MINUTA - SPECIFICATION | 0 | ---- | Buy | |
| 1425 | IS 18063 : 2022/ISO 14175:2008 |
Scythes - Specification | 0 | ---- | Buy | |
| 1426 | IS 18067 : 2023/ISO 7755-2:2013 |
Radiological protection - Sealed radioactive sources - General requirements and classification | 0 | ---- | Buy | |
| 1427 | IS/ISO 18091 : 2019/ISO 6789-2 : 2017 (1 Revision) |
Quality Management Systems - Guidelines for the application of ISO 9001 in local government (First Revision) | 0 | Dec, 2024 | Buy | |
| 1428 | IS 18103 : 2022/ISO 8000-60 : 2017 |
Plastics - Polyacrylamide materials - Designation system and specification | 0 | ---- | Buy | |
| 1429 | IS 18111 : 2023/14880-2:2006 |
Radiological protection - Criteria and performance limits for the periodic evaluation of dosimetry services | 0 | ---- | Buy | |
| 1430 | IS 18112 : 2022/ISO 4378-5:2009 |
Digital Television Receiver for Satellite Broadcast Transmission Specification | 0 | ---- | Buy | |
| 1431 | IS 18120 : 2023/ISO 14839-4:2012 |
Tourism and related services - Accessible tourism for all - Requirements and recommendations | 0 | ---- | Buy | |
| 1432 | IS/ISO/IEC/TR 18121 : 2015/ISO 16610-60 : 2015 |
Information technology-Learning education and training- Virtual experiment framework | 0 | ---- | Buy | |
| 1433 | IS 18123 : 2023/14880-5:2010 |
Electro technical Vocabulary : Electronic tubes | 0 | ---- | Buy | |
| 1434 | IS 18125 : Part 1 : 2023/ISO/TR 24119:2015 |
Implants for surgery - Total knee-joint prostheses Part 1 Determination of endurance properties of knee tibial trays | 0 | ---- | Buy | |
| 1435 | IS 18143 : 2023/ISO 10110-19:2015 |
Animal feeding stuffs � Determination of aflatoxin B1 | 0 | ---- | Buy | |
| 1436 | IS 18180 : Part 4 : 2023/14880-1:2019 |
Geometrical product specifications (GPS) � Basic concepts: Part 4 Geometrical characteristics for quantifying GPS deviations | 0 | ---- | Buy | |
| 1437 | IS 182 : 2022/ISO 4309 : 2017 (4 Revision) |
Textiles � MAZRI � Specification (third revision) | 0 | ---- | Buy | |
| 1438 | IS 1821 : 1987/ISO 273-1979 (3 Revision) |
Dimensions for clearance holes for bolts and screws (Third Revision) | 0 | Apr, 2024 | Buy | |
| 1439 | IS 18224 : 2023/ISO 10069-1 : 2008 |
General standard for qualification and certification of welding inspection personnel | 0 | ---- | Buy | |
| 1440 | IS 18263 : Part 1 : 2023/ISO 10071-2 : 2005 |
Ergonomic principles related to mental workload Part 1: General issues and concepts terms and definitions | 0 | ---- | Buy | |
| 1441 | IS/ISO 1834 : 1999/ISO 1834 : 1999 |
Short link chain for lifting purposes - General conditions of acceptance | 0 | Jan, 2025 | Buy | |
| 1442 | IS 1842 : 1961 |
Specification for surveying chain pins (Arrows) | 0 | Mar, 2021 | Download | |
| 1443 | IS/ISO 18431 : Part 1 : 2005/ISO 18431 : Part 1 : 2005 |
Mechanical vibration and shock - Signal processing: Part 1 general introduction | 1 | Dec, 2024 | Buy | |
| 1444 | IS 1850 : 1961 |
Dimensions for shank diameters and driving squares for rotating tools | 1 | Nov, 2018 | Download | |
| 1445 | IS 1856 : 2021/ISO 10552:2014 (4 Revision) |
Steel wire ropes for haulage purposes - Specification Fourth Revision | 0 | ---- | Buy | |
| 1446 | IS/ISO 18587 : 2017 |
TRANSLATION SERVICES — POST-EDITING OF MACHINE TRANSLATION OUTPUT— REQUIREMENTS | 0 | ---- | Download | |
| 1447 | IS 1862 : 1975 (2 Revision) |
Specification for studs (Second Revision) | 1 | Feb, 2021 | Download | |
| 1448 | IS 1878 : Part 1 : 1993 (2 Revision) |
Test chart for general purpose parallel lathes: Part 1 lathes with swing over bed up to 800 mm (Second Revision) | 0 | Jan, 2019 | Download | |
| 1449 | IS 1878 : Part 2 : 1992 (2 Revision) |
Test chart for general purpose parallel lathes: Part 2 lathes with swing over bed over 800 mm and up to 1600 mm (Second Revision) | 0 | Jan, 2019 | Download | |
| 1450 | IS 1878 : Part 3 : 1998 |
Test chart for general purpose parallel lathes: Part 3 lathes with swing over bed over 1800 mm and up to 2500 mm | 0 | Jan, 2019 | Download | |
| 1451 | IS 1885 : Part 48 : 2023/ISO 14732 : 2013 |
International Electrotechnical Vocabulary (IEV) Part 48: Reproduction of Audio and Video | 0 | ---- | Buy | |
| 1452 | IS 1891 : Part 2 : 1993 (3 Revision) |
Conveyor and elevator textile belting - Specificaton: Part 2 heat resistant belting (Third Revision) | 3 | Mar, 2023 | Download | |
| 1453 | IS 1891 : Part 3 : 1988 (2 Revision) |
Specification for rubber conveyor and elevator textile belting: Part 3 oil resistant belting (Second Revision) | 3 | Mar, 2023 | Download | |
| 1454 | IS 1891 : Part 5 : 1993 |
Conveyor and elevator textile belting - Specification: Part 5 fire resistant belting for surface application | 1 | Mar, 2023 | Download | |
| 1455 | SP 19 : 1980 |
Guidelines for classification of quality of scraped surfaces | 0 | Mar, 2021 | Download | |
| 1456 | IS 19012 : 2022/ISO 21920-1 : 2021 |
Nonanol - Specification | 0 | ---- | Buy | |
| 1457 | IS/ISO 19014 : Part 1 : 2018/ISO 19014-1:2018 |
Earth-Moving Machinery - Functional Safety Part 1 Methodology to Determine Safety-related Parts of the Control System and Performance Requirements | 0 | Oct, 2024 | Buy | |
| 1458 | IS/ISO 19014 : Part 3 : 2018/ ISO 19014-3:2018 |
Earth-Moving Machinery - Functional Safety Part 3 Environmental Performance and Test Requirements of Electronic and Electrical Components Used in Safety-Related Parts of the Control System | 0 | Jan, 2025 | Buy | |
| 1459 | IS 19019 : Part 1 : 2023/14880-3:2006 |
Measurement of the electrical properties of microwave tubes Part 1: Terminology | 0 | ---- | Buy | |
| 1460 | IS/ISO 19104 : Part 1 : 2018/19104-1 |
Earth-Moving Machinery - Functional Safety Part 1 Methodology to Determine Safety-related Parts of the Control System and Performance Requirements | 0 | ---- | Buy | |
| 1461 | IS 1928 : 1961 |
Specification for boiler rivets (12 To 48 Mm Diameter) | 0 | Feb, 2021 | Download | |
| 1462 | IS 1929 : 1982 (1 Revision) |
Specification for hot forged steel rivets for hot closing (12 To 36 Mm Diameter) | 4 | Feb, 2021 | Download | |
| 1463 | IS 1930 : 2003/ISO 2729 : 1995 (3 Revision) |
Woodworking tools - Chisels and gouges (Third Revision) | 0 | Jan, 2025 | Buy | |
| 1464 | IS 1931 : 2000 (3 Revision) |
ENGINEER’S FILES — SPECIFICATION ( Third Revision) | 1 | Mar, 2021 | Download | |
| 1465 | IS 1932 : 2022/ISO 16610-22:2015 (3 Revision) |
Mustard and Rapeseed Oilcake as Livestock Feed Ingredient � Specification | 0 | ---- | Buy | |
| 1466 | IS 1955 : 1961 |
Specification for prismatic compass, liquid | 0 | Mar, 2021 | Download | |
| 1467 | IS 1957 : 1961 |
Specification for prismatic compasses, non - Liquid | 1 | Mar, 2021 | Download | |
| 1468 | IS 1966 : Part 2 : 2022/ISO 16610-21:2011 (3 Revision) |
Textiles - Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension (third revision) | 0 | ---- | Buy | |
| 1469 | IS 1983 : 2004/ISO 241 : 1994 (2 Revision) |
Shank for turning and planing tools -- Shapes and dimensions of the section (second revision) | 0 | Jan, 2021 | Buy | |
| 1470 | IS/ISO 1984 : Part 2 : 2011/ISO 1984 : Part 2 : 2011 |
Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy: Part 2 machines with vertical spindle | 0 | Mar, 2022 | Buy | |
| 1471 | IS 1991 : Part 1 : 1987 (2 Revision) |
Safety requirements for the use, care and protection of abrasive grinding wheels : Part 1 definitions (Second Revision) | 0 | Jun, 2023 | Download | |
| 1472 | IS 1991 : Part 2 : 1987 (2 Revision) |
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 2 handling and storage (Second Revision) | 0 | Jun, 2023 | Download | |
| 1473 | IS 1991 : Part 3 : 1987 (2 Revision) |
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 3 general machine requirements (second revision) | 0 | Jun, 2023 | Download | |
| 1474 | IS 1991 : Part 4 : 1988 (2 Revision) |
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 4 safety guards (Second Revision) | 0 | Jun, 2023 | Download | |
| 1475 | IS 1991 : Part 5 : 1987 (2 Revision) |
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 5 flanges (Second Revision) | 0 | Jun, 2023 | Download | |
| 1476 | IS 1991 : Part 6 : 1987 (2 Revision) |
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 6 inspection and mounting (second revision) | 0 | Jun, 2023 | Download | |
| 1477 | IS 1991 : Part 7 : 1987 (2 Revision) |
Safety requirements forjhe use,care and projection of abrasive grinding wheels: Part 7 standard speeds (Second Revision) | 0 | Jun, 2023 | Download | |
| 1478 | IS 1991 : Part 8 : 1987 (2 Revision) |
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 8 special speeds (Second Revision) | 0 | Jun, 2023 | Download | |
| 1479 | IS 1991 : Part 9 : 1987 (2 Revision) |
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 9 general operating rules (Second Revision) | 0 | Jun, 2023 | Download | |
| 1480 | IS 1991 : Part 10 : 1987 (2 Revision) |
Safety requirements for the use, care and protection of abrasive grinding wheels: Part 10 mounted wheels (Second Revision) | 0 | Jun, 2023 | Download | |
| 1481 | IS 2007 : 1974 (1 Revision) |
Method for calibration of vertical oil storage tanks (First Revision) | 0 | Apr, 2024 | Download | |
| 1482 | IS 2008 : 1961 |
Method For Computation of Capacity Tables For Vertical Oil Storage Tanks | 1 | Apr, 2024 | Download | |
| 1483 | IS 2009 : 1975 (1 Revision) |
Method for calibration of horizontal and tilted oil storage tanks (First Revimn) | 0 | Apr, 2024 | Download | |
| 1484 | IS 2012 : 2006 (1 Revision) |
Red phosphorus - Specification (First Revision) | 0 | Apr, 2021 | Download | |
| 1485 | IS 2013 : 1995 (3 Revision) |
T - Slots - Dimensions and spacings (Third Revision) | 0 | Mar, 2022 | Download | |
| 1486 | IS 2014 : 1996 (2 Revision) |
T - Bolts - Specification (Second Revision) | 0 | Mar, 2022 | Download | |
| 1487 | IS 2015 : 1977 (1 Revision) |
Specification for t - Nuts (First Revision) | 1 | Mar, 2022 | Download | |
| 1488 | IS 2016 : 1967 (1 Revision) |
Specification for plain washers (First Revision) | 4 | Feb, 2021 | Download | |
| 1489 | IS/ISO 20242 : Part 1 : 2005/ISO 20242-1 : 2005 |
Industrial automation systems and integration - Service interface for testing applications: Part 1 overview | 0 | Nov, 2022 | Buy | |
| 1490 | IS 2028 : 2004 (5 Revision) |
Open jaw wrenches (Spanners) - Specification (Fijih Revision) | 0 | Jun, 2019 | Download | |
| 1491 | IS/ISO20283 : Part 2 : 2008/ISO 20283 : Part 2 : 2008 |
Mechanical vibration - Measurement of vibration on ships: Part 2 measurement of structural vibration | 0 | Sep, 2022 | Buy | |
| 1492 | IS 2029 : 1998 (4 Revision) |
Ring wrenches (Spanners) - Specification (Fourth Revision) | 1 | Aug, 2024 | Download | |
| 1493 | IS 2030 : 1989 (2 Revision) |
Box spanners - Specification (Second Revision) | 1 | Aug, 2024 | Download | |
| 1494 | IS 2031 : 1987/ISO 496 (1 Revision) |
Driving and driven machines - Shaft heights (First Revision J | 0 | Mar, 2023 | Buy | |
| 1495 | IS/ISO 2041 : 2018/2041:2018 (1 Revision) |
Mechanical Vibration, Shock and Condition Monitoring — Vocabulary ( First Revision ) | 0 | Mar, 2018 | Buy | |
| 1496 | IS/ISO 20430 : 2020/ISO 20430 |
Plastics and Rubber Machines — Injection Moulding Machines — Safety Requirements | 0 | Jun, 2024 | Buy | |
| 1497 | IS 2048 : 1983 (2 Revision) |
Specification for parallel keys and keyways (Second Revision ) | 2 | Aug, 2023 | Download | |
| 1498 | IS 2063 : Part 1 : 2016/ISO 230-1:2012 |
Test code for machine tools: Part 1 geometric accuracy of machines operating under No - Load or quasi - Static conditions (Third Revision) | 0 | Mar, 2022 | Buy | |
| 1499 | IS 2063 : Part 2 : 2016/ISO 230-2:2014 (3 Revision) |
Test code for machine tools: Part 2 determination of accuracy and repeatability of positioning of numerically controlled axes (First Revision) | 0 | Mar, 2021 | Buy | |
| 1500 | IS 2063 : Part 5 : 2016/ISO 230-5 : 2000 |
Test code for machine tools: Part 5 determination of the noise emission | 0 | Mar, 2021 | Buy | |
| 1501 | IS 2063 : Part 6 : 2016/ISO 230-6 : 2002 |
Test code for machine tools: Part 6 determination of positioning accuracy on body and face diagonals (Diagonal Displacement Tests) | 0 | Mar, 2021 | Buy | |
| 1502 | IS 2063 : Part 8 : 2016/ISO/TR 230-8:2010 |
Test code for machine tools: Part 8 vibrations | 0 | Mar, 2021 | Buy | |
| 1503 | IS 2063 : Part 9 : 2016/ISO/TR 230-9:2005 |
Test code for machine tools: Part 9 estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations | 0 | Mar, 2021 | Buy | |
| 1504 | IS 207 : 1964 (1 Revision) |
Specification for gate and shutter hooks and eyes (Revised) | 2 | Feb, 2021 | Download | |
| 1505 | IS/ISO 20700 : 2017/ISO 8000-81 : 2021 |
Guidelines for Management Consultancy Services | 0 | Jun, 2024 | Buy | |
| 1506 | IS/ISO 20816 : Part 1 : 2016/ISO 20816 : Part 1 : 2016 |
Mechanical vibration - Measurement and evaluation of machine vibration: Part 1 general guidelines | 0 | Feb, 2021 | Buy | |
| 1507 | IS/ISO 20816 : Part 2 : 2017/20816-2:2017 |
Mechanical Vibration — Measurement and Evaluation of Machine Vibration Part 2 Land-Based Gas Turbines, Steam Turbines and Generators in Excess of 40 MW, with Fluid-Film Bearings and Rated Speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min ( First Revision ) | 0 | ---- | Buy | |
| 1508 | IS/ISO 20816 : Part 4 : 2018/20816-4:2018 |
Mechanical Vibration - Measurement and Evaluation of Machine Vibration Part 4 Gas Turbines in Excess of 3 MW, with Fluid-Film Bearings (First Revision) | 0 | ---- | Buy | |
| 1509 | IS/ISO 20816 : Part 5 : 2018/20816-5:2018 |
Mechanical Vibration — Measurement and Evaluation of Machine Vibration Part 5 Machine Sets in Hydraulic Power Generating and Pump-Storage Plants ( First Revision ) | 0 | ---- | Buy | |
| 1510 | IS 2092 : 1983/ISO 463 : 2006 (1 Revision) |
Specification for plunger type dial gauges (First Revision) | 1 | Feb, 2019 | Buy | |
| 1511 | IS 2102 : Part 1 : 1993/ISO 2768-1 : 1989 (3 Revision) |
General tolerances: Part 1 tolerances for linear and angular dimensions without individual tolerance indications (Third Revision) | 0 | Apr, 2024 | Buy | |
| 1512 | IS 2103 : 1980 (2 Revision) |
SPECIFICATION FOR ENGINEER - SQUARES ( Second Revision ) | 0 | Mar, 2022 | Download | |
| 1513 | IS 2122 : Part 1 : 1973 (1 Revision) |
Code of practice for selection, storage, installation and maintenance of belting for power transmission: Part 1 flat belt drives (First Revision) | 1 | Mar, 2023 | Download | |
| 1514 | IS 2122 : Part 2 : 1991 (1 Revision) |
Power transmission - Belts - Code of practice for selection, storage, installation and maintenance of belting for power transmission: Part 2 V - Belt drives (First Revision) | 0 | Mar, 2023 | Download | |
| 1515 | IS/ISO 21289 : 2008/ISO 21289 : 2008 |
Mechanical vibration and shock - Parameters to be specified for the acquisition of vibration data | 0 | Jan, 2022 | Buy | |
| 1516 | IS 2141 : 2000 (4 Revision) |
Hot dip galvanized stay strand - Specification (Fourth Revision) | 1 | Feb, 2021 | Download | |
| 1517 | IS/ISO 21507 : 2010/ISO 21507 : 2010 |
Earth - Moving machinery - Performance requirements for non - Metallic fuel tanks | 0 | ---- | Buy | |
| 1518 | IS 2155 : 1982 (1 Revision) |
Specification for cold forged solid steel rivets for hot closing (6 To 16 Mm Diameter) (First Revision) | 1 | Feb, 2021 | Download | |
| 1519 | IS 2161 : 1996 (1 Revision) |
Coolant pumps for general purpose machine tools - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 1520 | IS 2166 : 1963 |
Method for computation of capavity tables for horizontal and tilted oil storage tanks | 1 | Apr, 2024 | Download | |
| 1521 | IS 2182 : 2018/ISO 369:2009 (2 Revision) |
Machine tools - Symbols for indications appearing on machine tools (Second Revision) | 0 | May, 2023 | Buy | |
| 1522 | IS 2186 : 1985 (1 Revision) |
ISO metric external screw threads for interference fit applications (First Revision) | 0 | Feb, 2021 | Download | |
| 1523 | IS/ISO 21940 : Part 2 : 2017/ISO 21940-2:2017 |
Mechanical Vibration — Rotor Balancing Part 2 Vocabulary ( First Revision ) | 0 | ---- | Buy | |
| 1524 | IS/ISO 21940 : Part 11 : 2016/ISO 21940 : Part 11 : 2016 |
Mechanical vibration - Rotor balancing: Part 11 procedures and tolerances for rotors with rigid behaviour | 1 | Feb, 2021 | Buy | |
| 1525 | IS/ISO 21940 : Part 12 : 2016/ISO 21940 : Part 12 : 2016 |
Mechanical vibration - Rotor balancing: Part 12 procedures and tolerances for rotors with flexible behaviour | 0 | Feb, 2021 | Buy | |
| 1526 | IS/ISO 21940 : Part 13 : 2012/ISO 21940 : Part 13 : 2012 |
Mechanical vibration - Rotor balancing: Part 13 criteria and safeguards for in - Situ balancing for medium and large rotors | 0 | Dec, 2024 | Buy | |
| 1527 | IS/ISO 21940 : Part 14 : 2012/ISO 21940 : Part 14 : 2012 |
Mechanical vibration - Rotor balancing: Part 14 procedures for assessing balance errors | 1 | Dec, 2024 | Buy | |
| 1528 | IS/ISO 21940 : Part 23 : 2012/ISO 21940 : Part 23 : 2012 |
Mechanical vibration - Rotor balancing: Part 23 enclosures and other protective measures for the measuring station of balancing machines | 0 | Dec, 2024 | Buy | |
| 1529 | IS/ISO 21940 : Part 31 : 2013/ISO 21940 : Part 31 : 2013 |
Mechanical vibration - Rotor balancing: Part 31 susceptibility and sensitivity of machines to unbalance | 0 | Dec, 2024 | Buy | |
| 1530 | IS/ISO 21940 : Part 32 : 2012/ISO 21940 : Part 32 : 2012 |
Mechanical vibration - Rotor balancing: Part 32 shaft and fitment key convention | 0 | Dec, 2024 | Buy | |
| 1531 | IS/ISO 21948 : 2001/ISO 21948 : 2001 |
Coated abrasives - Plain sheets | 0 | Jun, 2023 | Buy | |
| 1532 | IS/ISO 21949 : 2001 : 2001/ISO 21949 : 2001 |
Coated abrasives - Plain sheets with holes for dust extraction | 0 | Jun, 2023 | Buy | |
| 1533 | IS/ISO 21950 : 2001/ISO 21950 : 2001 |
Coated abrasives - Plain discs | 0 | Jun, 2023 | Buy | |
| 1534 | IS/ISO 21951 : 2001/ISO 21951 : 2001 |
Coated abrasives - Plain discs with holes for dust extraction | 0 | Apr, 2025 | Buy | |
| 1535 | IS 2199 : 1989 (1 Revision) |
Radial drilling machines - Test chart (First Revision) | 0 | Jan, 2019 | Buy | |
| 1536 | IS 2202 : Part 1 : 2023/ISO 16610-62 : 2023 (7 Revision) |
Wooden Flush Door Shutters (Solid Core Type) — Specification Part 1 Plywood Face Panels ( Seventh Revision ) | 1 | ---- | Buy | |
| 1537 | IS/ISO 22109 : 2020/ISO 22109:2020 |
Industrial Valves - Gearbox for Valves | 0 | Jun, 2024 | Buy | |
| 1538 | IS/ISO 22153 : 2020/IS 22153:2020 |
Electric Actuators for Industrial Valves - General Requirements | 0 | Jun, 2024 | Buy | |
| 1539 | IS 2218 : 1999/ISO 229 : 1973 (1 Revision) |
Speeds and feeds for machine tools (First Revision) | 0 | Sep, 2018 | Buy | |
| 1540 | IS 2219 : 1962 |
Feeds for machine tools | 1 | Mar, 2021 | Download | |
| 1541 | IS 2220 : 1990 (1 Revision) |
Engineering metrology - Steel straightedges - Specification (First Revision) | 0 | Jan, 2020 | Download | |
| 1542 | IS/ISO 22319 : 2017/ISO 129-4 : 2013 |
Security and Resilience � Community resilience � Guidelines for planning the involvement of spontaneous volunteers | 0 | Mar, 2024 | Buy | |
| 1543 | IS 2232 : 1967 (1 Revision) |
Specification for slotted and castle nuts (First Revision) | 3 | Feb, 2021 | Download | |
| 1544 | IS 2233 : 1962 |
Specification for straightedges for drawing office use | 0 | Mar, 2021 | Download | |
| 1545 | IS 2241 : 1976 (1 Revision) |
Specification for round leather belting for small machines (First Revision) | 0 | Jul, 2024 | Download | |
| 1546 | IS 2243 : 1971 (1 Revision) |
Specification for drill chucks (First Revision) | 3 | Mar, 2022 | Download | |
| 1547 | IS 2251 : 1986 (1 Revision) |
Specification for plug and ring gauges for self holding tapers (First Revision) | 0 | Mar, 2022 | Download | |
| 1548 | IS 2265 : 2009 (2 Revision) |
Specification for galvanized steel wire strand for signaling purposes (First Revision) | 0 | Sep, 2020 | Download | |
| 1549 | IS 2266 : 2019 (5 Revision) |
Steel wire ropes for general engineering purpose - Specification (Fifth Revision) | 2 | Mar, 2024 | Download | |
| 1550 | IS 2269 : 2006/ISO 4762:2004 (5 Revision) |
Hexagon socket head cap screws (Fifth Revision) | 0 | Feb, 2021 | Buy | |
| 1551 | IS 2285 : 2003/ISO 8512-1 : 1990 (3 Revision) |
Engineering metrology - Measuring equipment - Cast iron surface plates - Specification (Third Revision) | 0 | Jul, 2024 | Buy | |
| 1552 | IS/ISO 22877 : 2004/ISO 22877 : 2004 |
Castors and wheels - Vocabulary, symbols and multilingual terminology | 0 | Feb, 2021 | Buy | |
| 1553 | IS 2288 : 1963 |
Specification for ranging rods | 0 | Mar, 2021 | Download | |
| 1554 | IS/ISO 22883 : 2004/ISO 22883 : 2004 |
Castors and wheels - Requirements for applications upto 1.1 m/s (4 Km/h) | 0 | Mar, 2023 | Buy | |
| 1555 | IS/ISO 22884 : 2004/ISO 22884 : 2004 |
Castors and wheels - Requirements for applications over 1.1 m/s (4 Km/h) and up to 4.4 m/s (16 Km/h) | 0 | Feb, 2023 | Buy | |
| 1556 | IS 2289 : 1976 (1 Revision) |
Specification for 60° dead centres for lathes (First Revision) | 1 | Mar, 2022 | Download | |
| 1557 | IS 2291 : 1990/ISO 3117 (3 Revision) |
Tangential keys and keyways (Third Revision) | 0 | Mar, 2023 | Buy | |
| 1558 | IS 2292 : 1974 (1 Revision) |
Specification for taper keys and keyways (First Revision) | 0 | May, 2024 | Download | |
| 1559 | IS 2293 : 1974 (1 Revision) |
Specification for gib - Head - Keys and keyways (First Revision) | 0 | May, 2024 | Download | |
| 1560 | IS 2294 : 1986 (2 Revision) |
Specifi - Cation for woodruff keys and keyways (Second Revision) | 2 | Mar, 2023 | Download | |
| 1561 | IS 2307 : 2004 (2 Revision) |
Magnesium powder for explosive and pyrotechnic compositions - Specification (Second Revision) | 1 | Apr, 2021 | Download | |
| 1562 | IS/ISO/TR 23244 : 2020/ISO 7755-3:2013 |
Blockchain and distributed ledger technologies Privacy and personally identifiable information protection considerations | 0 | ---- | Buy | |
| 1563 | IS 2327 : 1993/ISO 14 :1982 (1 Revision) |
Straight - Sided splines for cylindrical shafts with internal centering - Dimensions, tolerances and verification (First Revision) | 0 | Jan, 2025 | Buy | |
| 1564 | IS/ISO 2330 : 2002/ISO 2330:2002 |
Fork-Lift Trucks - Fork Arms - Technical Characteristics and Testing | 0 | ---- | Buy | |
| 1565 | IS 2334 : 2001/ISO 1502 : 1996 (2 Revision) |
ISO general purpose metric screw threads - Gauges and gauging (Second Revision) | 0 | Aug, 2023 | Buy | |
| 1566 | IS 2340 : 1972 (1 Revision) |
Dimensions for self-release 7/24 tapers for milling arbor and tool shanks (first revision) | 2 | Jan, 2021 | Download | |
| 1567 | IS 2341 : 1963 |
Specification for large metric capacity calibrating measures (Non - Tilting type) | 0 | Mar, 2022 | Download | |
| 1568 | IS 2361 : 2002 (3 Revision) |
Bulldog grips - Specification (Third Revision) | 0 | Feb, 2022 | Download | |
| 1569 | IS 2367 : 1981 (1 Revision) |
Test chart for box type vertical drilling machines (First Revision) | 0 | Jan, 2019 | Download | |
| 1570 | IS 2368 : 2018/ISO 2433:1999 (3 Revision) |
Machine tools - Test conditions for external cylindrical and universal grinding machines with a movable table - Testing of the accuracy (Third Revision) | 0 | May, 2023 | Buy | |
| 1571 | IS/ISO/IEC 23736 : Part 2 : 2020/ISO 19014-2:2022 |
Information technology Digital publishing EPUB 3.0.1 Part 2: Publications | 0 | ---- | Buy | |
| 1572 | IS/ISO/IEC 23736 : Part 5 : 2020/ISO 19014-5:2021 |
Information technology Digital publishing EPUB 3.0.1 Part 5: Media overlays | 0 | ---- | Buy | |
| 1573 | IS/ISO/IEC 23761 : 2021/ISO 7755-4:2013 |
Digital publishing EPUB accessibility Conformance and discoverability requirements for EPUB publications | 0 | ---- | Buy | |
| 1574 | IS 2383 : 1963 |
Code of practice for calibration of vehicle tanks for petroleum products and other liquids | 0 | Mar, 2022 | Download | |
| 1575 | IS 2393 : 2010/ISO 2338 : 1997 (5 Revision) |
Parallel pins, of unhardened steel and austenitic stainless steel (Third Revision) | 0 | Feb, 2021 | Buy | |
| 1576 | IS/ISO 2415 : 2004/ISO 2415 : 2004 |
Forged shackles for general lifting purposes - Dee shackles and bow shackles | 1 | Apr, 2019 | Buy | |
| 1577 | IS 2425 : 1982/ISO 2773-1 : 1973 (1 Revision) |
Test chart for pillar type vertical drilling machines (First Revision) | 0 | Jan, 2019 | Buy | |
| 1578 | IS 2426 : 1985 (1 Revision) |
Test chart for bench drilling machines (First revision) | 1 | Jan, 2019 | Download | |
| 1579 | IS 2428 : 2007/ISO 513 : 2012 (2 Revision) |
Classification and application of hard cutting materials for metal removal with defined cutting edges -- Designation of the main groups and groups of application (second revision) | 0 | Sep, 2017 | Buy | |
| 1580 | IS 2429 : Part 1 : 1987 (3 Revision) |
Specification for round steel short link chains (Electric Butt Welded), grade L(3): Part 1 Non - Calibrated load chain for lifting purposes (Third Revision) | 0 | Jan, 2023 | Download | |
| 1581 | IS/ISO/IEC/TR 24372 : 2021/ISO 7755-5:2013 |
Information Technology - Artificial Intelligence (AI) - Overview of Computational Approaches for AI System | 0 | ---- | Buy | |
| 1582 | IS 2458 : 2001/ISO 1122-1 (1 Revision) |
Vocabulary of gear terms - Definitions related to geometry (First Revision) | 0 | Mar, 2023 | Buy | |
| 1583 | IS 2466 : 1963 |
Specification for beam compasses | 0 | Mar, 2021 | Download | |
| 1584 | IS 2467 : 2002/ISO 701 (1 Revision) |
International gear notation - Symbols for geometrical data (First Revision) | 0 | Mar, 2023 | Buy | |
| 1585 | IS/ISO/IEC 24711 : 2021/ISO 8000-311 : 2012 |
Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components | 0 | ---- | Buy | |
| 1586 | IS 2473 : 1975 (1 Revision) |
Dimensions for centre holes (First Revision) | 2 | Sep, 2024 | Download | |
| 1587 | IS 2494 : Part 1 : 1994 (2 Revision) |
V - Belts - Endless V - Belts for industrial purposes: Part 1 general purpose - Specification (Second Revision) | 1 | Jan, 2020 | Download | |
| 1588 | IS 2494 : Part 2 : 1993 (2 Revision) |
V - Belts - Endless V - Belts for industrial purposes: Part 2 fire resistant and antistatic V - Belts - Specification | 3 | Jan, 2020 | Download | |
| 1589 | IS 2515 : 1978 (1 Revision) |
Test chart for guillotine shears (First Revision) | 0 | Mar, 2021 | Download | |
| 1590 | IS 2533 : 1978 (1 Revision) |
Specification for geometry boxes (First Revision) | 3 | Oct, 2022 | Download | |
| 1591 | IS 2534 : 1999 (1 Revision) |
Carbide tipped dead centres - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 1592 | IS 2535 : Part 1 : 2004/ISO 53 (3 Revision) |
Cylindrical gears for general and heavy engineering: Part 1 standard basic rack tooth profile (Third Revision) | 0 | Mar, 2023 | Buy | |
| 1593 | IS 2535 : Part 2 : 2004/ISO 54 (3 Revision) |
Cylindrical gears for general and heavy engineering: Part 2 module (Third Revision) | 0 | Mar, 2023 | Buy | |
| 1594 | IS 2539 : 1963 |
Specification for plane tables | 1 | Mar, 2021 | Download | |
| 1595 | IS 2540 : 2008 (1 Revision) |
Dimensions for threaded centre holes (First Revision) | 0 | Feb, 2025 | Download | |
| 1596 | IS 2554 : 1971 (1 Revision) |
Specification for cast iron angle plates (First Revision) | 1 | Jan, 2020 | Download | |
| 1597 | IS 2556 : Part 1 : 2021/ISO 17450-2:2012 (4 Revision) |
Vitreous China sanitary appliances - Specification: Part 1 General requirements (fourth revision) | 0 | ---- | Buy | |
| 1598 | IS 2556 : Part 6 : 2021/ISO 20140-2 : 2018 (5 Revision) |
Vitreous China sanitary appliances - Specification: Part 6 Specific requirements of urinal and partition plates (fifth revision) | 0 | ---- | Buy | |
| 1599 | IS 2581 : 2002 (4 Revision) |
Round strand galvanized steel wire ropes for shipping purposes - Specification (Fourth Revision) | 0 | Feb, 2022 | Download | |
| 1600 | IS 2582 : Part 1 : 2015/ISO 702 -1 : 2009 (3 Revision) |
Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 1 conical connection (Third Revision) | 0 | Mar, 2021 | Buy | |
| 1601 | IS 2582 : Part 2 : 2016/ISO 702 -2 : 2007 (3 Revision) |
Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 2 camlock type (Third Revision) | 0 | Mar, 2021 | Buy | |
| 1602 | IS 2582 : Part 4 : 2016/ISO 702 -4 : 2004 |
Machine tools - Connecting dimensions of spindle noses and work holding chucks: Part 4 cylindrical connection | 0 | Mar, 2021 | Buy | |
| 1603 | IS 2585 : 2006 (1 Revision) |
Square head bolts, screws and square nuts of product grade C - Specification (Second Revision) | 0 | Feb, 2021 | Download | |
| 1604 | IS 2586 : 1986 (2 Revision) |
Specification for bench vices (Second Revision) | 1 | Aug, 2024 | Download | |
| 1605 | IS 2587 : 1975 (1 Revision) |
Specification for pipe vices (Open Side Type And Fixed Sides Type) (First Revisicn) | 0 | Aug, 2024 | Download | |
| 1606 | IS 2588 : 1975 (1 Revision) |
Specification for Blacksmiths vice ( First Revision ) | 0 | Jan, 2025 | Download | |
| 1607 | IS 2594 : 2003 (2 Revision) |
Hacksaw blades -- Specification (second revision) | 0 | Aug, 2024 | Download | |
| 1608 | IS 26002 : Part 2 : 2021/ISO/IEC Guide 99:2007 |
ASSURANCE ENGAGEMENT STANDARD PART 2 CONDUCTING ASSURANCE ENGAGEMENTS FOR ALL MATTERS OTHER THAN STATUTORY FINANCIAL INFORMATION ─ GUIDANCE | 0 | Jan, 2025 | Buy | |
| 1609 | IS 2610 : 1989 (1 Revision) |
Power transmission - Straight sided splines for machine tools dimensions (First Revision) | 0 | Dec, 2023 | Download | |
| 1610 | IS/ISO 2631 : PART 2 : 2003/ISO 2631 : PART 2 : 2003 |
Mechanical vibration and shock - Evaluation of human exposure to whole body vibration: Part 2 vibration in buildings (1 Hz To 80 Hz) | 0 | Sep, 2022 | Buy | |
| 1611 | IS 2636 : 1972 (1 Revision) |
Specification for wing nuts (First Revision) | 0 | Feb, 2021 | Download | |
| 1612 | IS 2637 : 2004/ISO 487 (1 Revision) |
Steel roller chains, types s and c, attachments and sprockets (Second Revision) | 0 | Mar, 2023 | Buy | |
| 1613 | IS 2638 : 1974 (1 Revision) |
Specification for flat split cotters (First Revision) | 0 | Feb, 2021 | Download | |
| 1614 | IS 2643 : 2005/ISO 228-1:2000 (3 Revision) |
Pipe threads where pressure - Tight joints are not made on the threads - Dimensions, tolerances and designation (Third Revision) | 0 | Feb, 2021 | Buy | |
| 1615 | IS 2653 : 2004 (3 Revision) |
Safety matches in boxes - Specification (Third Revision) | 1 | Apr, 2021 | Download | |
| 1616 | IS 2668 : 2004/ISO 3337 : 2000 (1 Revision) |
T-slot cutters with cylindrical shanks and with morse taper shanks having tapped hole (second revision) | 1 | Jan, 2021 | Buy | |
| 1617 | IS 2669 : 1971 (1 Revision) |
Specification for woodruff keyslot milling cutters with parallel shank (first revision) | 1 | Nov, 2018 | Download | |
| 1618 | IS 2670 : 1991 |
Thread milling cutter shell type specification (first revision) | 0 | Aug, 2024 | Download | |
| 1619 | IS 2671 : 1964 |
Specification for interlocked milling cutters | 0 | Nov, 2018 | Download | |
| 1620 | IS 2687 : 1991 (2 Revision) |
Capnuts - Specification (Second Revision) | 0 | Feb, 2021 | Download | |
| 1621 | IS 2693 : 1989 (2 Revision) |
Power transmissionbush type flexible coupling (Second Revision) | 2 | May, 2024 | Download | |
| 1622 | IS/ISO/IEC 27036 : Part 1 : 2021/ISO 7755-6:2013 (1 Revision) |
Cybersecurity - Supplier Relationships Part 1: Overview and Concepts ( First Revision ) | 0 | ---- | Buy | |
| 1623 | IS 273 : 1990 (4 Revision) |
Picks and beaters - specification (Fourth Revision) | 1 | Apr, 2025 | Download | |
| 1624 | IS 274 : Part 1 and 2 : 1981 (3 Revision) |
Specification for shovels: Part 1 genral purpose shovels: Part 2 heat - Treated shovels (Third Revision) | 3 | Jan, 2025 | Download | |
| 1625 | IS 2743 : Part 1 : 2019/ISO 1986-1 : 2014 |
Test Conditions for Surface Grinding Machines with Horizontal Grinding Wheel Spindle and Reciprocating Table — Testing of the Accuracy Part 1 Machines with Table Length of up to 1 600 mm ( Third Revision ) | 0 | May, 2023 | Buy | |
| 1626 | IS 2745 : 1983 (2 Revision) |
Specification for non - Metal helmet for firemen and civil defence personnel (Second Revision) | 3 | Dec, 2020 | Download | |
| 1627 | IS 2747 : 1990 (1 Revision) |
Taximeters - performance requirements (First Revision) | 2 | Mar, 2022 | Download | |
| 1628 | IS 2751 : 1979 (1 Revision) |
Code of practice for welding of mild steel plain and deformed bars for reinforced concrete construction (First Revision) | 0 | Jan, 2019 | Download | |
| 1629 | IS 2754 : 1964 |
Genral requirements for optical instruments | 2 | Mar, 2022 | Download | |
| 1630 | IS 2759 : 1969 |
Specification for higher tensile steel point hooks for use with wire rope thimbles | 0 | Feb, 2022 | Download | |
| 1631 | IS 2760 : 1980 (1 Revision) |
Specification for steel chain slings (First Revision) | 3 | Oct, 2020 | Download | |
| 1632 | IS 2762 : 2009 (2 Revision) |
Wire rope slings and sling legs - Specification (Second Revision) | 0 | Sep, 2020 | Download | |
| 1633 | IS 2769 : 1969 (1 Revision) |
Sizes for squares and square holes for general engineering purposes (First Revision | 0 | Sep, 2024 | Download | |
| 1634 | IS 278 : 2009 |
Galvanized steel barbed wire for fencing - Specification (Fourth Revision) | 0 | Sep, 2020 | Download | |
| 1635 | IS 2801 : 1967 |
Accuracy requirements for bulk meters used in petroleum trade | 1 | Mar, 2022 | Download | |
| 1636 | IS 2804 : 1998 (1 Revision) |
Palm grips - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 1637 | IS 2805 : 1964 |
Dimensions for ball grips | 1 | Mar, 2022 | Download | |
| 1638 | IS 2808 : 1964 |
Method for computation of capacity tables for pressurized storage tanks | 0 | Apr, 2024 | Download | |
| 1639 | IS 2811 : 1987 (1 Revision) |
Recommendations for manual tungsten inert - Gas arc welding of austenitic stainless steel (First Revision) | 1 | Jan, 2019 | Download | |
| 1640 | IS 2812 : 1993 (1 Revision) |
Recommendations for manual tungsten inert gas arc welding of aluminium and aluminium alloys (First Revision) | 2 | Jan, 2019 | Download | |
| 1641 | IS 2817 : 1965 |
Methods for sampling of coated abrasives | 0 | Oct, 2020 | Download | |
| 1642 | IS 2825 : 1969 |
Code for unfired pressure vessels | 5 | Feb, 2022 | Download | |
| 1643 | IS 2827 : 1976 (1 Revision) |
Methods for calibration of pressurized storage tanks (First Revision) | 0 | Apr, 2024 | Download | |
| 1644 | IS 2852 : 1998 (1 Revision) |
CARPENTERS’ AUGERS - SPECIFICATION ( First Revision ) | 0 | Jan, 2025 | Download | |
| 1645 | IS/ISO 2867 : 2011/ISO 2867 : 2011 |
Earth - Moving machinery - Access systems | 0 | Mar, 2022 | Buy | |
| 1646 | IS 2877 : 1986 (1 Revision) |
Test chart for single and double column planing machines (Second Revision) | 0 | Jan, 2019 | Download | |
| 1647 | IS 2890 : 1983 (1 Revision) |
Specification for taper handles for machine tools (First Revision) | 0 | Mar, 2022 | Download | |
| 1648 | IS 2898 : Part 1 : 2019/ISO 3290-1 : 2014 |
Rolling bearings -- Balls: Part 1 Steel balls (Second Revision) | 0 | ---- | Buy | |
| 1649 | IS 2898 : Part 2 : 2019/ISO 3290-2 : 2014 |
Rolling bearings -- Balls: Part 2 Ceramic balls | 0 | ---- | Buy | |
| 1650 | IS 2907 : 1998 (1 Revision) |
Non - Ferrous rivets - Specification (First Revision) | 0 | Feb, 2025 | Download | |
| 1651 | IS 2909 : 1998 (1 Revision) |
Star grips - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 1652 | IS 2911 : Part 3 : 2021/ISO 14978:2018 (2 Revision) |
Design and construction of pile foundations - Code of practice: Part 3 Under-reamed piles (second revision) | 0 | ---- | Buy | |
| 1653 | IS 2921 : 2016/ISO 13225 (2 Revision) |
Geometrical product specifications (GPS) - Dimensional measuring equipment; height gauges - Design and metrological characteristics (Second Revision) | 0 | Mar, 2021 | Buy | |
| 1654 | IS 2925 : 1984 (2 Revision) |
Specification for industrial safety helmets (Second Revision) | 4 | Dec, 2020 | Download | |
| 1655 | IS 2927 : 1975 (1 Revision) |
Specification for brazing alloys (First Revision) | 1 | Jan, 2024 | Download | |
| 1656 | IS 2949 : 1992 (2 Revision) |
Engineering metrology - Plain V - Blocks for inspection purposes - Specification (Second Revision) | 0 | Mar, 2022 | Download | |
| 1657 | IS 2966 : 1964 |
Specification for internal micrometers (Including Stick Micrometers) | 1 | Feb, 2019 | Download | |
| 1658 | IS 2967 : 1983 (1 Revision) |
Specification for external micrometer (First Revision) | 0 | Feb, 2019 | Download | |
| 1659 | IS 2976 : 1964 |
Specification for optical theodolite | 0 | Mar, 2022 | Download | |
| 1660 | IS 2984 : 2003/ISO 3650 : 1998 (2 Revision) |
Slip gauges - Specification [ISO title : geometrical product specifications (GPS) - length standards : gauge blocks] (Second Revision) | 0 | Feb, 2019 | Buy | |
| 1661 | IS 2987 : 1992/ISO 447 : 1984 (2 Revision) |
Direction of operation of controls for machine tools - Recommendations (Second Revision) | 0 | May, 2023 | Buy | |
| 1662 | IS 2988 : 1995 (1 Revision) |
Vernier theodolite - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 1663 | IS 2989 : 1980 (1 Revision) |
Specification for keys for lathe chucks (First Revision) | 0 | Jan, 2025 | Download | |
| 1664 | IS 2990 : 1986 (1 Revision) |
Specification for tenons (First Revision) | 0 | Mar, 2022 | Download | |
| 1665 | IS 2995 : 1988 (1 Revision) |
Specification for set collars (First Revision) | 0 | Jan, 2019 | Download | |
| 1666 | IS 2998 : 1982 (1 Revision) |
Specification for cold forged steel rivets for cold closing (1 To 16 mm Diameter) (First Revision) | 3 | Apr, 2024 | Download | |
| 1667 | IS 301 : 1982 (2 Revision) |
Specification for potassium nitrate for explosive and pyrotechnic compositions (Second Revision) | 1 | Apr, 2021 | Download | |
| 1668 | IS 3012 : 2023/ISO 6480:2019 (2 Revision) |
Chrome Manganese - Specification (Second Revision) | 0 | ---- | Buy | |
| 1669 | IS/ISO/IEC 30136 : 2018/ISO 764:2020 |
Information technology Performance testing of biometric template protection schemes | 0 | Jun, 2024 | Buy | |
| 1670 | IS 3016 : 1982 (1 Revision) |
Code of practice for fire precautions in welding and cutting operations (First Revision) | 0 | Mar, 2021 | Download | |
| 1671 | IS 3019 : 1973 (1 Revision) |
Specification for high speed steel butt -- Welded single point turning tools (first revision) | 3 | Aug, 2024 | Download | |
| 1672 | IS 3023 : 2013 (1 Revision) |
Recommened practice for building - Up by thermal spraying (First Revision) | 0 | Feb, 2024 | Download | |
| 1673 | IS 3025 : Part 10 : 2023/ISO 10069-2 : 2008 (2 Revision) |
Methods of Sampling and Test Physical and Chemical for Water and Wastewater Part 10 Turbidity Second Revision | 0 | ---- | Buy | |
| 1674 | IS 3025 : Part 24 : Sec 2 : 2021/ISO 17450-4:2017 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 24 Sulphates Section 2 Method by Continuous Flow Analysis | 0 | ---- | Buy | |
| 1675 | IS 3025 : Part 60 : Sec 2 : 2022/ISO 8000-65 : 2020 |
Methods of Sampling and Test Physical and Chemical for Water and Wastewater Part 60 Fluoride Section 2 Method using flow injection analysis FIA and spectrometric detection after off-line distillation | 0 | ---- | Buy | |
| 1676 | IS 3025 : Part 72 : 2022/ISO 19085-3 : 2017 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 72 Determination of Perfluorooctanesulfonate (PFOS) and Perfluorooctanoate (PFOA) | 0 | ---- | Buy | |
| 1677 | IS 3025 : Part 73 : 2021/ISO 19085-10 : 2018 |
Methods of Sampling and Test (Physical and Chemical) for Water and Wastewater Part 73 Instrument Based Method for Determination of Total Organic Carbon (TOC), Dissolved Organic Carbon (DOC), Total Bound Nitrogen (TNb) and Dissolved Bound Nitrogen (DNb) | 0 | ---- | Buy | |
| 1678 | IS 3032 : 1965 |
General requirements for testing the accuracy of commercial measuring instruments used in petroleum trade | 0 | Mar, 2022 | Download | |
| 1679 | IS 3033 : 1965 |
Accuracy requirements for dispensing pumps used in petroleum trade | 0 | Mar, 2022 | Download | |
| 1680 | IS 3047 : 1965 |
Accuracy Requirements For Volumetric Container Filling Machines Used In Petroleum Trade | 0 | Mar, 2022 | Download | |
| 1681 | IS 3048 : 1965 |
Dimensions for handwheels | 0 | Mar, 2022 | Download | |
| 1682 | IS 3063 : 1994 (2 Revision) |
Fasteners - Single coil rectangular section spring lock washers specification (Second Revision) | 1 | Feb, 2021 | Download | |
| 1683 | IS 3073 : 1967 |
Assessment of surface roughness | 4 | Mar, 2021 | Download | |
| 1684 | IS 3075 : Part 1 : 1986 (1 Revision) |
Specification for circlips: Part 1 for shafts (First Revision) | 2 | Mar, 2022 | Download | |
| 1685 | IS 3075 : Part 2 : 1986 (1 Revision) |
Specification for circlips: Part 2 for bores (First Revision) | 1 | Mar, 2022 | Download | |
| 1686 | IS 3075 : Part 3 : 1986 (1 Revision) |
Specification for circlips: Part 3 type e for shafts (First Revision) | 1 | Mar, 2022 | Download | |
| 1687 | IS/ISO 3076 : 2012/ISO 3076 : 2012 (1 Revision) |
Round steel short link chains for general lifting purposes - Medium tolerance sling chains for chain slings - Grade 8 (First Revision) | 0 | Jan, 2025 | Buy | |
| 1688 | IS/ISO 3077 : 2001/ISO 3077 : 2001 |
SHORT LINK CHAIN FOR LIFTING PURPOSES GRADE T (TYPES T, OAT AND DT), FINE-TOLERANCE HOIST CHAIN | 0 | Jan, 2025 | Buy | |
| 1689 | IS 3080 : 1965 |
Test chart for universal tool and cutter grinders | 0 | Jan, 2019 | Download | |
| 1690 | IS 3081 : 1994 (1 Revision) |
Microscopes - General purposes - Dimensions and marking (First Revision) | 0 | Mar, 2019 | Download | |
| 1691 | IS 3082 : 2008/ISO 2936 : 2014 (3 Revision) |
Assembly tools for screws and nuts - hexagon socket screw keys (Third Revision) | 0 | Aug, 2024 | Buy | |
| 1692 | IS 3090 : 1965 |
Code of practice for installation and maintenance of rolling bearings | 0 | Jul, 2017 | Download | |
| 1693 | IS 3099 : Part 1 AND 2 : 1992 (1 Revision) |
Microscopes - Slips and slidesspecification: Part 1 microscope slips: Part 2 microscope slides (First Revision) | 4 | Mar, 2019 | Download | |
| 1694 | IS 3113 : 1965 |
Specification for prismatic binoculars for common use | 1 | Mar, 2021 | Download | |
| 1695 | IS 3135 : 1965 |
Specieication for cathetometer | 0 | Mar, 2021 | Download | |
| 1696 | IS 3142 : 1993 (2 Revision) |
Pulleys - V - Grooved pulleys for endless V - Belts sections 2, A, B, C, D and e and endless wedge belts sections SPZ, SPA, SPB and SPC - Specification (Second Revision) | 0 | Jan, 2020 | Download | |
| 1697 | IS 3150 : 1982 (2 Revision) |
Hexagonal Wire Netting for General Purposes | 1 | Jun, 2023 | Download | |
| 1698 | IS 3152 : 1980 (1 Revision) |
Specification for needle files (First Revision) | 0 | Apr, 2025 | Download | |
| 1699 | IS/ISO 3155 : 1976 |
Stranded wire ropes for mine hoisting - Fiber components - Characteristics and tests | 0 | Jul, 2021 | Download | |
| 1700 | IS/ISO 3156 : 1976/ISO 3156 : 1976 |
Stranded wire ropes for mine hoisting - Impregnating compounds, lubricants and service dressings - Characteristics and tests | 0 | Jul, 2021 | Buy | |
| 1701 | IS 3177 : 2020 (3 Revision) |
Electric Overhead Travelling Crane and Gantry Crane for all Applications — Code of Practice ( Third Revision ) | 0 | ---- | Download | |
| 1702 | IS 3178 : 1996 (1 Revision) |
Abrasive emery grain - Specification (First Revision) | 0 | Mar, 2018 | Download | |
| 1703 | IS 3181 : 1992 (2 Revision) |
Conveyor belts - Fire resistant conveyor belting for underground mines and such other hazardous applications - Specification (Second Revision) | 1 | Mar, 2023 | Download | |
| 1704 | IS 3196 : Part 1 : 2013 (6 Revision) |
Welded low carbon steel cylinders exceeding 5 litres water capacity for low pressure liquefiable gases: Part 1 cylinders for liquefied petroleum gases (Lpg) - Specification (Sixth Revision) | 4 | Mar, 2024 | Download | |
| 1705 | IS 3196 : Part 2 : 2006 (5 Revision) |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases: Part 2 cylinders for liquefiable non - Toxic gases other than lpg - Specification (First Revision) | 3 | Mar, 2020 | Download | |
| 1706 | IS 3196 : Part 3 : 2012 (5 Revision) |
Welded low carbon steel cylinder exceeding 5 litre water capacity for low pressure liquefiable gases: Part 3 methods of test (Fifth Revision) | 2 | Oct, 2022 | Download | |
| 1707 | IS 3196 : Part 4 : 2001 |
Welded low carbon steel cylinders exceeding 5 litre water capacity for low pressure liquefiable gases - Specification: Part 4 cylinders for toxic and corrosive gases | 2 | Nov, 2021 | Download | |
| 1708 | IS 3206 : 1989 (1 Revision) |
Engineers Drawing Instruments - Dividers - Specification ( First Revision ) | 0 | Mar, 2019 | Download | |
| 1709 | IS 3207 : 1989 (1 Revision) |
Engineers' Drawing Instruments - Rotating Compasses | 0 | Mar, 2019 | Download | |
| 1710 | IS 3208 : 1989 (1 Revision) |
Engineers drawing instruments - Half set of compasses - Specification (First Revision) | 0 | Mar, 2019 | Download | |
| 1711 | IS 3209 : 1989 (1 Revision) |
Engineers Drawing Instruments - Spring Bow Compasses - Specification ( First Revision ) | 0 | Mar, 2019 | Download | |
| 1712 | IS 3210 : 1989 (1 Revision) |
Engineers' Drawing Instruments - Drawing Pens | 0 | Mar, 2019 | Download | |
| 1713 | IS 3211 : 1991 (1 Revision) |
Engineers Drawing Instruments, Pen Points (First Revision) | 0 | Mar, 2021 | Download | |
| 1714 | IS 3212 : 1991 (1 Revision) |
Engineers' drawings instruments, lengthening bars | 0 | Mar, 2021 | Download | |
| 1715 | IS 3213 : 1991 (1 Revision) |
Engineers Drawing Instruments - Handles - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 1716 | IS 3214 : 1991 (1 Revision) |
Engineers Drawing Instruments, Pencil Points - Specification ( First Revision ) | 0 | Mar, 2021 | Download | |
| 1717 | IS 3215 : 1991 (1 Revision) |
Engineers Drawing Instruments - Needle Points - Specification ( First Revision ) | 1 | Mar, 2021 | Download | |
| 1718 | IS 3216 : 1989 (1 Revision) |
Engineers Drawing Instruments, Needles - Specification ( First Revision ) | 0 | Mar, 2019 | Download | |
| 1719 | IS 3217 : 1991 (1 Revision) |
Engineers Drawing Instruments, Prickers - Specification ( First Revision ) | 0 | Mar, 2021 | Download | |
| 1720 | IS 3218 : 1968 |
Specification for parallel rulers, 150 mm (Link Type) | 0 | Mar, 2019 | Download | |
| 1721 | IS 3219 : 1966 |
Specification For Engineers Drawing Instruments, Boxes for Leads and Needles | 0 | Mar, 2021 | Download | |
| 1722 | IS 3220 : 1966 |
Specification For Engineers Drawing Instruments, Screw Drivers | 0 | Mar, 2021 | Download | |
| 1723 | IS 3221 : 1966 |
Sets for drawing instruments | 0 | Mar, 2021 | Download | |
| 1724 | IS 3222 : Part 1 : 1989 (1 Revision) |
Instrument screws - Specification: Part 1 fasteners for drawing instruments (First Revision) | 0 | Mar, 2019 | Download | |
| 1725 | IS 3224 : 2002 (3 Revision) |
Valve fittings for compressed gas cylinders excluding liquefied petroleum gas (LPG) cylinders - Specification (Third Revision) | 3 | Nov, 2017 | Download | |
| 1726 | IS 3239 : 1994 (2 Revision) |
Die stock for circular screwing dies -- Specification (second revision) | 0 | Aug, 2024 | Download | |
| 1727 | IS 328 : 2022/ISO 11119-3 : 2020 (4 Revision) |
OIL OF EUCALYPTUS GLOBULUS - SPECIFICATION | 0 | ---- | Buy | |
| 1728 | IS 3300 : 1980 (1 Revision) |
Dimensions for mounted wheels and points (First Revision) | 0 | Mar, 2018 | Download | |
| 1729 | IS 334 : 2023/9802 : 2022 (4 Revision) |
Glossary of terms relating to bitumen and tar (Fourth Revision) | 0 | ---- | Buy | |
| 1730 | IS 3370 : Part 2 : 2021/ISO TR 22100-2:2013 (2 Revision) |
Concrete Structures for Retaining Aqueous Liquids - Code of Practice : Part 2 Plain and Reinforced Concrete (Second Revision) | 1 | ---- | Buy | |
| 1731 | IS 3374 : 2013 (2 Revision) |
Preformed steel wire ropes for aircraft control (Second Revision) | 0 | Mar, 2019 | Download | |
| 1732 | IS 3400 : Part 2 : Sec 3 : 2022 |
METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 3 DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE | 0 | ---- | Download | |
| 1733 | IS 3400 : Part 2 : Sec 8 : 2022/IS 18719 (Part 1): 2024/ ISO 21029-1: 2018 |
METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 8 APPARENT HARDNESS OF RUBBER-COVERED ROLLERS BY PUSEY AND JONES METHOD | 0 | ---- | Buy | |
| 1734 | IS 3400 : Part 2 : Sec 9 : 2022 |
METHODS OF TEST FOR RUBBER, VULCANIZED OR THERMOPLASTIC PART 2 DETERMINATION OF HARDNESS SECTION 9 CALIBRATION AND VERIFICATION OF HARDNESS TESTERS | 0 | ---- | Download | |
| 1735 | IS 3400 : Part 14 : Sec 1 : 2021 |
Methods of test for Vulcanized Rubbers: Part 14 Adhesion of Rubber to Rigid Substrate Section 1 90 peel method Second Revision | 0 | ---- | Download | |
| 1736 | IS 3403 : 1981 |
Dimensions for knurls (First Revision) | 0 | Sep, 2024 | Download | |
| 1737 | IS 3406 : Part 1 : 1986 (2 Revision) |
Dimensions for countersinks and counterbores: Part 1 countersinks (Second Revision) | 0 | Sep, 2024 | Download | |
| 1738 | IS 3406 : Part 2 : 2014 (3 Revision) |
Dimensions for countersinks and counterbores: Part 2 counterbores (Third Revision) | 0 | Apr, 2024 | Download | |
| 1739 | IS/ISO 3411 : 2007/ISO 3411:2007 |
Earth - Moving machinery - Physical dimensions of operators and minimum operator space envelope | 0 | ---- | Buy | |
| 1740 | IS 3428 : 2009 (2 Revision) |
Dimensions for relief grooves (Second Revision) | 0 | Feb, 2025 | Download | |
| 1741 | IS 3438 : 2023/ISO 23480 : 2013 (3 Revision) |
SILVERED GLASS MIRRORS FOR GENERAL PURPOSES � SPECIFICATION (Third revision) | 0 | ---- | Buy | |
| 1742 | IS/ISO 3449 : 2005/ISO 3449 : 2005 |
Earth - Moving machinery - Falling - Opject protective structures - Laboratory tests and performance requirements | 0 | Oct, 2022 | Buy | |
| 1743 | IS 3455 : 1971 (1 Revision) |
Gauging practice for plain workpieces (First Revision) | 4 | Jan, 2020 | Download | |
| 1744 | IS 3455 : Part 1 : 1985 (1 Revision) |
Gauging practice for plain workpieces: Part 1 inspection of plain workpieces with indicative measuring instruments | 1 | Jan, 2020 | Download | |
| 1745 | IS 3457 : 2009 (1 Revision) |
Radii for rounding for general engineering purposes (Second Revision) | 0 | Apr, 2024 | Download | |
| 1746 | IS/ISO 3457 : 2003/ISO 3457 : 2003 |
Earth - Moving machinery - Guards - Definitions and requirements | 0 | Mar, 2022 | Buy | |
| 1747 | IS 3459 : 2004 (2 Revision) |
Small wire ropes - Specification (Second Revision) | 0 | Sep, 2020 | Download | |
| 1748 | IS 3460 : 1991 (2 Revision) |
Knurled nuts - Specification (Second Revision) | 0 | Feb, 2021 | Download | |
| 1749 | IS 3468 : 1991 (2 Revision) |
Pipe nuts - Specification (Second Revision) | 1 | Feb, 2021 | Download | |
| 1750 | IS/ISO3471 : 2008/ISO 3471 : 2008 |
Earth-Moving Machinery - Roll-Over Protective Structures-Laboratory Tests and Performance Requirements | 0 | Mar, 2022 | Buy | |
| 1751 | IS 3485 : 1983 (2 Revision) |
Specification for plain and master setting ring gauges (Size Range From 1 Up To And Including 315 Mm) (Second Revision) | 1 | Feb, 2019 | Download | |
| 1752 | IS 3510 : 1990 (1 Revision) |
Engineering Metrology - Toolmaker Flats - Specification ( First Revision ) | 0 | Jan, 2020 | Download | |
| 1753 | IS 3512 : 1966 |
Specification for Toolmakers Straightedges | 1 | Mar, 2025 | Download | |
| 1754 | IS 3515 : 1966 |
Specification For Tapes For Use In Measurement Of Oil Quantities | 1 | Mar, 2022 | Download | |
| 1755 | IS 3524 : Part 1 : 1982 (1 Revision) |
Specification for threaded taper pins: Part 1 with internal threads (First Revision) | 0 | Feb, 2021 | Download | |
| 1756 | IS 3524 : Part 2 : 1982 (1 Revision) |
Specification for threaded taper pins: Part 2 with external threads (First Revision) | 0 | Feb, 2021 | Download | |
| 1757 | IS 3525 : 1998 (2 Revision) |
Metal arc welding for hull construction of merchant ship in carbon and carbon manganese steels - Code of practice (Second Revision) | 0 | Jan, 2019 | Download | |
| 1758 | IS 3529 : 1966 |
Specification for eyelet pliers | 0 | Apr, 2025 | Download | |
| 1759 | IS 3542 : 1980 (1 Revision) |
Specification for extended pitch transmission precision roller chains and chain wheel (First Revision) | 0 | Mar, 2023 | Download | |
| 1760 | IS 3560 : 1980 (1 Revision) |
Specification for short pitch transmission precision bush chains and chain wheels (First Revision) | 0 | May, 2024 | Download | |
| 1761 | IS 3568 : 1990/ISO 5745 : 1982 (1 Revision) |
Round nose pliers - Specification (First Revision) | 0 | Mar, 2021 | Buy | |
| 1762 | IS 3569 : 1966 |
Specification for burner pliers | 0 | Apr, 2025 | Download | |
| 1763 | IS 3587 : 1986 (2 Revision) |
Specification for rasps (Second Revision) | 1 | Jan, 2025 | Download | |
| 1764 | IS 3600 : Part 3 : 2018/ISO 4136 : 2022 (4 Revision) |
Method of testing fusion welded joints and weld metal in steel: Part 3 destructive tests on welds in metallic materials - Transverse tensile test (Fourth Revision) | 0 | Feb, 2023 | Buy | |
| 1765 | IS 3600 : Part 4 : 1984/ISO 5178:2019 (2 Revision) |
Method of testing fusion welded joints and weld metal in steel: Part 4 longitudinal tensile test on cylindrical all weld metal test pieces using butt joints (Second Revision) | 0 | Mar, 2021 | Buy | |
| 1766 | IS 3600 : Part 8 : 1985/ISO 9017 : 2017 (2 Revision) |
Method of testing fusion welded joints and weld metal in steel: Part 8 nick break test and fillet weld fracture test (Second Revision) | 0 | Jan, 2024 | Buy | |
| 1767 | IS 3640 : 1982 (1 Revision) |
Specification for hexagon fit bolts (First Revision) | 1 | Feb, 2021 | Download | |
| 1768 | IS 3650 : 1981 (2 Revision) |
Specification for combination side cutting pliers (Second Revision) | 1 | Mar, 2022 | Download | |
| 1769 | IS 3681 : 1995 (1 Revision) |
Gears - Cylindrical, gears - Accuracies (First Revision) | 0 | Feb, 2021 | Download | |
| 1770 | IS 3686 : 1966 |
Specification for student - Type microscope | 2 | Mar, 2021 | Download | |
| 1771 | IS 3688 : 1990/ISO 775 (2 Revision) |
Power transmission - Shafts - Dimensions for cylindrical and 1/10 conical shaft ends (Second Revision) | 0 | Mar, 2023 | Buy | |
| 1772 | IS 3691 : 1990/ISO 7007 : 1983 (2 Revision) |
Woodworking machines - Table bandsawing machines - Nomenclature and acceptance conditions (Second Revision) | 0 | Jan, 2019 | Buy | |
| 1773 | IS 3694 : 1991/ISO 7987 : 1985 (2 Revision) |
Test chart for woodworking turning lathes (Second Revision) | 0 | Jan, 2019 | Buy | |
| 1774 | IS 3708 : Part 5 : 2022/ISO 16610-71 : 2014 (4 Revision) |
METHODS OF TEST FOR NATURAL RUBBER LATEX PART 5 DETERMINATION OF KOH NUMBER Fourth Revision | 0 | ---- | Buy | |
| 1775 | IS 3710 : 1978 (1 Revision) |
Filling ratios for low pressure liquefiable gases contained in cylinders (First Revision) | 1 | Mar, 2020 | Download | |
| 1776 | IS 3726 : 2003 (2 Revision) |
Thumb screws - Specification (Second Revision) | 0 | Apr, 2024 | Download | |
| 1777 | IS 3727 : 1966 |
Specification for wing screws | 0 | Feb, 2021 | Download | |
| 1778 | IS 3734 : 1983 (1 Revision) |
Dimensions for worm gearing (First Revision) | 1 | Feb, 2021 | Download | |
| 1779 | IS 3756 : 2002 (1 Revision) |
Method for gear correction - Addendum modification for external cylindrical gears with parallel axes (First Revision) | 0 | Mar, 2023 | Download | |
| 1780 | IS 3757 : 1985 (2 Revision) |
Specification for high strength structural bolts (Second Revision) | 2 | Dec, 2019 | Download | |
| 1781 | IS 3793 : 1966 |
Specification for live centres | 1 | Jan, 2019 | Download | |
| 1782 | IS/ISO 3795 : 1989/ISO 3795:1989 |
Road Vehicles and Tractors and Machinery for Agriculture and Forestry - Determination of Burning Behaviour of Interior Materials | 0 | Nov, 2022 | Buy | |
| 1783 | IS 3800 : 2023/ISO 10110-7:2017 (2 Revision) |
BATTING GLOVES SPECIFICATION | 0 | ---- | Buy | |
| 1784 | IS 3822 : 2002 (2 Revision) |
Eye hooks for use with chains - Specification (Second Revision) | 0 | Jan, 2023 | Download | |
| 1785 | IS 3823 : 2014/ISO 76 : 2006 (3 Revision) |
Rolling bearings -- Static load ratings (Third Revision) | 0 | May, 2023 | Buy | |
| 1786 | IS 3824 : 2014/ISO 281 : 2007 (3 Revision) |
Rolling bearings -- Dynamic load ratings and rating life (Third Revision) | 0 | Jan, 2023 | Buy | |
| 1787 | IS 3832 : 2005 (3 Revision) |
Hand - Operated chain pulley block - Specification (Third Revision) | 3 | Oct, 2020 | Download | |
| 1788 | IS/ISO/IEC 38507 : 2022/ISO 14839-1:2018 |
Information Technology - Governance of IT - Governance Implications of the Use of Artificial Intelligence by Organizations | 0 | ---- | Buy | |
| 1789 | IS 3937 : Part 1 : 2022/ISO 8000-100 : 2016 (2 Revision) |
RECOMMENDATIONS FOR SOCKETING OF WIRE ROPES - PART 1 SOCKETING WITH ZINC Second Revision | 0 | ---- | Buy | |
| 1790 | IS 3938 : 1983 (2 Revision) |
Specification for electric wire rope hoists (Second Revision) | 2 | Jan, 2023 | Download | |
| 1791 | IS/ISO 3939 : 1977/ISO 3939 : 1977 (1 Revision) |
Fluid power systems and components - Multiple lip packing sets - Methods for measuring stack heights | 0 | Aug, 2023 | Buy | |
| 1792 | IS 3948 : 1986 (1 Revision) |
Specification for calibrated high tensile steel (Round Link) chain (Electric Butt Welded) for chain conveyors and coal ploughs used in mines | 1 | Feb, 2023 | Download | |
| 1793 | IS 3974 : 1967 |
Specification for bifurcated rivets for general purposes | 0 | Feb, 2021 | Download | |
| 1794 | IS/ISO/IEC 39794 : Part 1 : 2019/ISO 1413:2016 |
Information technology Extensible biometric data interchange formats Part 1: Framework | 0 | Jun, 2024 | Buy | |
| 1795 | IS/ISO/IEC 39794 : Part 4 : 2019/ISO 22810:2010 |
Information technology Extensible biometric data interchange formats Part 4: Finger image data | 0 | Jun, 2024 | Buy | |
| 1796 | IS 3980 : 1982 (1 Revision) |
Specification for porous metal powder oil -- Impregnated bearings (First Revision) | 1 | Jan, 2025 | Download | |
| 1797 | SP 4 : 1969 |
Metric Change In India | 0 | Apr, 2021 | Download | |
| 1798 | IS 4001 : 2017 (3 Revision) |
Mine tubs - specification (Third Revision) | 0 | Sep, 2022 | Download | |
| 1799 | IS 4003 : Part 1 : 1978 (1 Revision) |
Specification for pipe wrenches: Part 1 general purpose (First Revision) | 2 | Mar, 2021 | Download | |
| 1800 | IS 4003 : Part 2 : 1986 (1 Revision) |
Specification for pipe wrenches: Part 2 heavy duty (First Revision) | 2 | Apr, 2025 | Download | |
| 1801 | IS 4005 : 1967 |
Specification for tungsten carbide for mining tools | 0 | Sep, 2020 | Download | |
| 1802 | IS 4009 : Part 1 : 1981 (1 Revision) |
Specification for grease nipples: Part 1 button head grease nipples (First Revision) | 0 | Sep, 2019 | Download | |
| 1803 | IS 4009 : Part 2 : 1981 (1 Revision) |
Specification for grease nlpples: Part 2 conical head grease nipples (First Revision) | 0 | Sep, 2019 | Download | |
| 1804 | IS 4009 : Part 3 : 1995 |
Lubritcating Equipment - Grease Nipples Part 3 Cup Type - Specification | 0 | Sep, 2019 | Download | |
| 1805 | IS 4017 : 1992 (1 Revision) |
CARPENTERS SQUARES - SPECIFICATION ( First Revision ) | 0 | Jan, 2025 | Download | |
| 1806 | IS/ISO/IEC 40180 : 2017/ISO 7755-7:2013 |
Information technology - Quality for learning education and training - Fundamentals and reference framework | 0 | ---- | Buy | |
| 1807 | IS 402 : 1990 (3 Revision) |
Cold chisels - Specification (Third Revision) | 1 | Jan, 2025 | Download | |
| 1808 | IS 4022 : 1996/ISO 883 : 1985 (2 Revision) |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole -- Dimensions (second revision) | 0 | Jan, 2021 | Buy | |
| 1809 | IS 4040 : 1998 (1 Revision) |
Fasteners - Solid drilled tubular and semi - Tubular rivets - Specification (First Revision) | 2 | Apr, 2024 | Download | |
| 1810 | IS/ISO 4043 : 2016/ISO 2772 : 2019 |
SIMULTANEOUS INTERPRETING - MOBILE BOOTHS - REQUIREMENTS | 0 | ---- | Buy | |
| 1811 | IS 4071 : 1986 (1 Revision) |
Specification for Master Gears (first revision) | 0 | Feb, 2021 | Download | |
| 1812 | IS 4095 : 1991 (2 Revision) |
Pincers - Specification (Second Revision) | 0 | Apr, 2025 | Download | |
| 1813 | IS 4124 : 1981 (1 Revision) |
Glossary of terms relating to powders (First Revison) | 0 | Jun, 2020 | Download | |
| 1814 | IS 413 : 1974 (2 Revision) |
Specification for round punches (Second Revision) | 1 | Apr, 2025 | Download | |
| 1815 | IS 4152 : 2011 (3 Revision) |
Seamless carbon dioxide cylinders for fire fighting purposes on boardship - Specification (Third Revision) | 0 | Nov, 2021 | Download | |
| 1816 | IS 4164 : 1976 (1 Revision) |
Specification for Lifting `C' Hooks with Eye - Capacity up to 25 Tonnes | 0 | Oct, 2020 | Download | |
| 1817 | IS 4172 : 2005/ISO 885:2000 (1 Revision) |
General purpose bolts and screws - Metric series - Radii under the head (Second Revision) | 0 | Feb, 2021 | Buy | |
| 1818 | IS 4178 : 1967 |
Specification for eyenuts with collars | 0 | Oct, 2020 | Download | |
| 1819 | IS 4190 : 1984 (1 Revision) |
Specification for eye bolts with collars (First Revision) | 0 | Oct, 2020 | Download | |
| 1820 | SP 42 : 2008 (1 Revision) |
Survey of screw threads (First Revision) | 0 | Feb, 2021 | Download | |
| 1821 | IS 4210 : 1967 |
Specification for strip feeler gauges for electrical purposes | 1 | Nov, 2024 | Download | |
| 1822 | IS 4211 : 1993 (1 Revision) |
Gauges - Thread pitch gauges for ISO metric screw threads (Pitch Range 0.4 To 6 Mm) - Specification (First Revision) | 0 | Feb, 2019 | Download | |
| 1823 | IS 4215 : 1983 (1 Revision) |
Specification for ring type needle bearings (First Revision) | 0 | Jun, 2020 | Download | |
| 1824 | IS 4216 : 1981 (1 Revision) |
Specification for needle cages (First Revision) | 1 | May, 2021 | Download | |
| 1825 | IS 4217 : 2020 (2 Revision) |
Rolling bearings -- Needle rollers -- Specification (Second Revision) | 0 | ---- | Download | |
| 1826 | IS 4218 : Part 1 : 2001/ISO 68-1:1998 (2 Revision) |
ISO general purpose metric screw threads: Part 1 basic profile - second revision) | 1 | Apr, 2023 | Buy | |
| 1827 | IS 4218 : Part 2 : 2001/ISO 261:1998 (2 Revision) |
ISO general purpose metric screw threads: Part 2 general plan (Second Revision) | 0 | Apr, 2023 | Buy | |
| 1828 | IS 4218 : Part 3 : 1999/ISO 724 : 1993 (2 Revision) |
ISO general purpose metric screw threads: Part 3 basic dimensions (Second Revision) | 1 | Feb, 2021 | Buy | |
| 1829 | IS 4218 : Part 4 : 2001/ISO 262:1998 (2 Revision) |
ISO general purpose metric screw threads: Part 4 selected sizes for screws, bolts and nuts (Second Revision) | 0 | Apr, 2023 | Buy | |
| 1830 | IS 4240 : 1984 (1 Revision) |
Glossary of conveyors terms and definitions (First Revision) | 0 | Feb, 2023 | Download | |
| 1831 | IS 4241 : 1990 (1 Revision) |
Engineering metrology - Engineer Parallels - Specification ( First Revision ) | 0 | Jan, 2020 | Download | |
| 1832 | IS 4262 : 2022/ISO 544:2017 (2 Revision) |
Sulphuric acid - Code of Safety (Second Revision) | 0 | ---- | Buy | |
| 1833 | IS 4278 : 1988 (2 Revision) |
Specification for flexible shafts for speedometers and tachographs (Second Revision) | 1 | Jan, 2020 | Download | |
| 1834 | IS 4291 : 1996 (1 Revision) |
C - Washers - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 1835 | IS 4294 : 2018 (2 Revision) |
Jig buttons - Specification (Second Revision) | 0 | May, 2023 | Download | |
| 1836 | IS 4295 : 1983 (1 Revision) |
Specification for locking dogs (Catches) with springs (First Revision) | 2 | Mar, 2022 | Download | |
| 1837 | IS 4296 : Part 1 : 2016/ISO 6752 : 2008 (2 Revision) |
Tools for pressing: Part 1 round punches with 60 degrees conical head and straight shank (Second Revision) | 0 | Mar, 2021 | Buy | |
| 1838 | IS 4296 : Part 3 : 2015/ISO 9181 : 2007 (2 Revision) |
Tools for pressing: Part 3 round punches with 60 degree conical head and reduced shank (Second Revision) | 0 | Mar, 2021 | Buy | |
| 1839 | IS 4297 : 1996 (1 Revision) |
Spherical washers and conical seats - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 1840 | IS 4298 : 2009 (2 Revision) |
Swing C- Washers - Specification (Second Revision) | 0 | Mar, 2021 | Download | |
| 1841 | IS 4299 : 1982 (1 Revision) |
Specification for jig feet (First Revision) | 0 | Mar, 2022 | Download | |
| 1842 | IS/ISO 4301 : Part 2 : 2022/ISO 16610-20:2015 (1 Revision) |
Cranes Classification Part 2 Mobile Cranes (First Revision) | 0 | ---- | Buy | |
| 1843 | IS/ISO 4306 : Part 2 : 2012/iso 4306-2 (1 Revision) |
Cranes - Vocabulary: Part 2 mobile cranes (Second Revision) | 0 | Jan, 2025 | Buy | |
| 1844 | IS/ISO 4310 : 2009/ISO 4310 : 2009 |
Cranes - Test code and procedures | 0 | Jan, 2025 | Buy | |
| 1845 | IS 4328 : 1967 |
Specification for monocular dissecting microscope | 2 | Mar, 2021 | Download | |
| 1846 | IS 4329 : 1967 |
Specification for measuring (Travelling) microscope | 2 | Mar, 2021 | Download | |
| 1847 | IS 433 : Part 7 : 2022/ISO 11119-1 : 2020 |
METHODS OF TEST FOR RUBBER AND PLASTICS TUBING HOSES AND HOSE ASSEMBLIES PART 7 RUBBER AND PLASTICS HOSES DETERMINATION OF ADHESION BETWEEN COMPONENTS | 0 | ---- | Buy | |
| 1848 | IS 4349 : 1987 (1 Revision) |
Specification for cylindrical setting masters (First Revision) | 0 | Nov, 2024 | Download | |
| 1849 | IS 4353 : 1995 (1 Revision) |
Submerged arc welding of mild steel and low alloy steels - Recommendations (First Revision) | 0 | Mar, 2021 | Download | |
| 1850 | IS 4378 : Part 1 : 2017/ISO 5749 (3 Revision) |
Pliers and nippers: Part 1 diagonal cutting nippers - Dimensions and tests values (Third Revision) | 0 | Aug, 2024 | Buy | |
| 1851 | IS 4378 : Part 2 : 2018/ISO 5748 (3 Revision) |
Pliers and nippers: Part 2 end cutting nippers - Dimensions and test values (Third Revision) | 0 | Aug, 2024 | Buy | |
| 1852 | IS 438 : 2006 (2 Revision) |
Aluminium powder for explosives and pyrotechnic compositions - Specification (Second Revision) | 1 | Apr, 2021 | Download | |
| 1853 | IS 4380 : 1967 |
Specification for abney level | 1 | Mar, 2021 | Download | |
| 1854 | IS 4396 : 1981 (1 Revision) |
Specification for barium nitrate for explosive and pyrotechnic compositions (First Revision) | 1 | Apr, 2021 | Download | |
| 1855 | IS/ISO 4412 : PART 1 : 1991/ISO 4412 - 1 : 1991 |
Hydraulic fluid power - Test code for determination ok airborne noise levels: Part 1 pumps | 0 | Dec, 2024 | Buy | |
| 1856 | IS/ISO 4412 : PART 2 : 1991/ISO 4412-2:1991 |
Hydraulic fluid power - Test code for determination of airborne noise levels: Part 2 motors | 0 | Dec, 2024 | Buy | |
| 1857 | IS/ISO 4412 : Part 3 : 1991/ISO 4412-3 : 1991 |
Hydraulic fluid power - Test code for determination of airborne noise levels: Part 3 pumps - Method using a parallelepiped microphone array | 0 | Dec, 2024 | Buy | |
| 1858 | IS 4440 : 1996 (1 Revision) |
Engineering metrology - Precision equipment - Slip gauge accessories (First Revision) | 0 | Feb, 2019 | Download | |
| 1859 | IS 4460 : Part 1 to 3 : 1995 (1 Revision) |
Gears - spur and helical gears - Calculation of load capacity (First Revision) | 2 | Mar, 2023 | Download | |
| 1860 | IS 4472 : Part 1 : 2021/ISO 23247-1 : 2021 (1 Revision) |
Textile dyestuffs — Identification of the application classes of dyes on textile materials Part 1 Cotton and other cellulosic fibres (first revision) | 0 | ---- | Buy | |
| 1861 | IS 4481 : 1988 (1 Revision) |
Specification for duck - Bill pliers (First Revision) | 0 | Apr, 2025 | Download | |
| 1862 | IS 4485 : 1968 |
Specification for track spanners for railways | 1 | Jul, 2021 | Download | |
| 1863 | IS 4492 : 1968 |
Specification for welded V - Blocks (Diameter Range 300 To 2000 Mm) | 1 | Feb, 2019 | Download | |
| 1864 | IS 4499 : 1968 |
Dimensions for depth of holes for studs | 1 | Feb, 2021 | Download | |
| 1865 | IS 4502 : 1999 (1 Revision) |
Machine vices - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 1866 | IS 4506 : 1989 (1 Revision) |
Hand tools - Fork & general purpose - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 1867 | IS 451 : 1999 (3 Revision) |
Technical supply conditions for wood screws (Third Revision) | 0 | Feb, 2021 | Download | |
| 1868 | IS 4561 : Part 1 : 1968 |
Specification for oil cans: Part 1 light duty oil cans | 1 | Oct, 2023 | Download | |
| 1869 | IS 4561 : Part 2 : 1968 |
Specification for oil cans: Part 2 conical oil cans | 0 | Sep, 2019 | Download | |
| 1870 | IS 4561 : Part 3 : 1968 |
Specification for oil cans: Part 3 feeding oil cans | 0 | Sep, 2019 | Download | |
| 1871 | IS 4561 : Part 4 : 1968 |
Specification for oil cans: Part 4 detachable spout oil cans | 0 | Sep, 2019 | Download | |
| 1872 | IS 4561 : Part 5 : 1968 |
Specification for oil cans: Part 5 lever type oil cans | 1 | Oct, 2023 | Download | |
| 1873 | IS 4563 : 1987 (1 Revision) |
Specification for block squares (First Revision) | 0 | Feb, 2019 | Download | |
| 1874 | IS 4573 : 2020 (2 Revision) |
Power Driven Mobile Cranes — Specification ( Second Revision ) | 0 | ---- | Download | |
| 1875 | IS 4590 : 1980 (1 Revision) |
Specification for secondary level (First Revision) | 1 | Mar, 2021 | Download | |
| 1876 | IS 4592 : 2002/ISO 6899 : 1984 (1 Revision) |
Acceptance conditions of open mechanical front power presses - Testing of accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 1877 | IS 4593 : 1968 |
Test chart for straight - Sided presses | 0 | Mar, 2021 | Download | |
| 1878 | IS 4594 : 1968 |
Code of practice for design of portal and semi - Portal wharf cranes (Electrical) | 0 | Oct, 2020 | Download | |
| 1879 | IS 4595 : 1969 |
GENERAL REQUIREMENTS FOR NON-SPARKING TOOLS | 0 | Mar, 2021 | Download | |
| 1880 | SP 46 : 2003 (1 Revision) |
Engineering drawing practice for schools and colleges | 0 | Feb, 2021 | Download | |
| 1881 | IS 4605 : 2020/15848 -2 : 2015 (2 Revision) |
Crepe Bandage - Specification ( Second Revision ) | 0 | Jul, 2024 | Buy | |
| 1882 | IS 4668 : 1985 (1 Revision) |
Specification for ammonium nitrate for explosives (First Revision) | 2 | Apr, 2021 | Download | |
| 1883 | IS 4670 : 1993 (1 Revision) |
Legal Metrology - Liquor Measures - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 1884 | IS 4672 : 1982 (1 Revision) |
Specification for grease cups (First Revision) | 0 | May, 2024 | Download | |
| 1885 | IS 4673 : 1968 |
Specification for wick feed lubricators | 1 | May, 2024 | Download | |
| 1886 | IS 4695 : Part 1 : 2003 (2 Revision) |
General purpose knuckle threads: Part 1 profile and nominal sizes (Second Revision) | 0 | Feb, 2021 | Download | |
| 1887 | IS 4695 : Part 2 : 2003 (2 Revision) |
General purpose knuckle threads: Part 2 deviations and tolerances (Second Revision) | 0 | Feb, 2021 | Download | |
| 1888 | IS 4696 : Part 1 : 2004 (1 Revision) |
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 1 THREAD PROFILES (Second Revision) | 0 | Feb, 2025 | Download | |
| 1889 | IS 4696 : Part 2 : 2004 (1 Revision) |
DIMENSIONS FOR METRIC BUTTRESS THREADS PART 2 PITCH DIAMETER COMBINATIONS (Second Revision) | 0 | Feb, 2025 | Download | |
| 1890 | IS 4696 : Part 3 : 2004 (2 Revision) |
Dimensions for metric buttress threads: Part 3 basic dimensions (Second Revision) | 0 | Feb, 2025 | Download | |
| 1891 | IS 4696 : Part 4 : 2005 (1 Revision) |
Dimensions for metric buttress threads: Part 4 tolerancing system (Second Revision) | 0 | Feb, 2021 | Download | |
| 1892 | IS/ISO 4708 : 2017/ISO 21920-2:2021 |
Composition cork— Gasket material — Test methods | 0 | ---- | Buy | |
| 1893 | IS 4732 : 1968 |
Specification for rivets for shipbuilding | 0 | Feb, 2021 | Download | |
| 1894 | IS 4757 : Part 2 : 2020/ISO 3547-5 : 2007 |
Plain bearings -- Wrapped bushes: Part 2 Test data for outside and inside diameters (Second Revision) | 0 | ---- | Buy | |
| 1895 | IS 4757 : Part 3 : 2020/ISO 3547-3 : 2017 |
Plain bearings -- Wrapped bushes: Part 3 Lubrication holes, grooves and indentations (Second Revision) | 0 | ---- | Buy | |
| 1896 | IS 4757 : Part 4 : 2020/ISO 3547-4 : 2017 |
Plain bearings -- Wrapped bushes: Part 4 Materials (Second Revision) | 0 | ---- | Buy | |
| 1897 | IS 4762 : 2002 (1 Revision) |
FASTENERS — WORM DRIVE HOSE CLAMPS FOR GENERAL PURPOSES — SPECIFICATION ( Second Revision ) | 4 | Feb, 2021 | Download | |
| 1898 | IS 4768 : 2022 (2 Revision) |
STAINLESS STEEL BUCKETS SPECIFICATION | 0 | ---- | Download | |
| 1899 | IS 4773 : 2017/ISO 113 (3 Revision) |
Rolling bearings - Plummer block housings - Boundary dimensions (Third Revision) | 0 | Jan, 2023 | Buy | |
| 1900 | IS 4776 : Part 1 : 1977 (1 Revision) |
Specification for troughed belt conveyors: Part 1 troughed belt conveyors for surface installation | 0 | Dec, 2024 | Download | |
| 1901 | IS 4776 : Part 2 : 1977 |
Specification for troughed belt conveyors: Part 2 troughed belt conveyors for underground installation | 0 | Dec, 2024 | Download | |
| 1902 | IS 4806 : 1968 |
Specification For Heat Coil Pliers | 0 | Mar, 2021 | Download | |
| 1903 | IS 4816 : 1987 (2 Revision) |
Specification for permanent - Magnetic chucks (Second Revision) | 0 | Mar, 2022 | Download | |
| 1904 | IS 4822 : 2022/IEC 82045-1 : 2001 (2 Revision) |
Brass and Bronze Cooking Utensils - Specification | 0 | ---- | Buy | |
| 1905 | IS 4838 : 1990 (2 Revision) |
Anthropometric dimensions for school children age group 5 - 17 years (Second Revision) | 0 | May, 2020 | Download | |
| 1906 | IS 4849 : 1992 (1 Revision) |
Meteorology - Rain measures - Specification (First Revision) | 1 | Feb, 2019 | Download | |
| 1907 | IS 4864 to 4870 : 1968 |
Specification for shell flanges for vessels and equipment | 0 | Jul, 2020 | Download | |
| 1908 | IS/ISO 4866 : 2010/ISO 4866 : 2010 |
Mechanical vibration and shock - Vibration of fixed structures - Guidelines for the measurement of vibrations and evaluation of their effects on structures | 0 | Sep, 2022 | Buy | |
| 1909 | IS 4870 : 1968 |
Flat gaskets for shell flanges - (SEE IS 4864 TO IS 4870) | 0 | Jul, 2020 | Download | |
| 1910 | IS/ISO 4871 : 1996/ ISO 4871:1996 |
Acoustics - Declaration and Verification of Noise Emission Values of Machinery and Equipment | 0 | Nov, 2022 | Buy | |
| 1911 | IS 4914 : 1983 (1 Revision) |
Specification for tap wrenches adjustable (first revision) | 4 | Aug, 2024 | Download | |
| 1912 | IS 4915 : 1968 |
Specification for welders chipping hammer | 1 | Mar, 2021 | Download | |
| 1913 | IS 4918 : 1981 (1 Revision) |
Specification for hard metal (Carbide) wire, bar and tube drawing dies (First Revision ] | 0 | Aug, 2024 | Download | |
| 1914 | IS 4921 : 1968 |
Specification for extension bars | 0 | Aug, 2024 | Download | |
| 1915 | IS 4943 : 1968 |
Assessment of butt and fillet fusion welds in steel sheet, plate and pipe | 0 | Jan, 2019 | Download | |
| 1916 | IS 4948 : 2020 (3 Revision) |
Welded Steel Wire Fabric for General Use - Specification ( Third Revision ) | 1 | ---- | Download | |
| 1917 | IS 4960 : 1968 |
Specification for universal and elongated type V - Blocks | 0 | Jan, 2020 | Download | |
| 1918 | IS 4966 : Part 1 : 1969 |
Specification for gauges for serrations: Part 1 for gauging external serrations | 0 | Feb, 2019 | Download | |
| 1919 | IS 4966 : Part 2 : 1969 |
Specification for gauges for serrations: Part 2 for gauging internal serrations | 0 | Feb, 2019 | Download | |
| 1920 | IS 4972 : Part 6 : 2022/ISO 4126-5: 2013 |
Resistance Spot Welding Part 6 Straight Resistance Spot Welding Electrodes (First Revision of IS 4972) | 0 | ---- | Buy | |
| 1921 | IS 5006 : 1968 |
Specification for battery terminal pliers | 0 | Apr, 2025 | Download | |
| 1922 | IS/ISO5006 : 2017/ISO5006 : 2006 (1 Revision) |
Earth-Moving Machinery - Operators Field of View - Test Method and Performance Criteria (First Revision) | 0 | Feb, 2023 | Buy | |
| 1923 | IS/ISO 5010 : 2019/ISO 5010:2019 |
Earth-Moving Machinery - Wheeled Machines Steering Requirements (first revision) | 0 | Sep, 2023 | Buy | |
| 1924 | IS 5030 : Part 1 : 2017/ISO 4875-1 : 2006 (2 Revision) |
Metal cutting band saw blades: Part 1 Vocabulary (second revision) | 0 | ---- | Buy | |
| 1925 | IS 5030 : Part 2 : 2016/ISO 4875-2 : 2006 (2 Revision) |
Metal cutting band saw blades: Part 2 Characteristics and dimensions (second revision) | 0 | Jan, 2021 | Buy | |
| 1926 | IS 5030 : Part 3 : 2005 (2 Revision) |
Metal cutting bandsaw blade -- Specification: Part 3 Dimensions and other requirements (second revision) | 1 | Jan, 2021 | Download | |
| 1927 | IS 5031 : 1992 (2 Revision) |
Saws -- Metal slitting -- Specification (second revision) | 0 | Aug, 2024 | Download | |
| 1928 | IS 5037 : Part 1 : 2004/ISO 677 (1 Revision) |
Straight bevel gears for general engineering and heavy engineering: Part 1 basic rack (First Revision) | 0 | Mar, 2023 | Buy | |
| 1929 | IS 5037 : Part 2 : 2004/ISO 678 (1 Revision) |
Straight bevel gears for general engineering and heavy engineering: Part 2 module and diametral pitches (First Revision) | 0 | Mar, 2023 | Buy | |
| 1930 | IS 5054 : Part 4 : 2021/ISO 23247-3 : 2021 |
Radio frequency and coaxial cable assemblies Part 4 RF coaxial connectors with inner diameter of outer conductor 16 mm 063 in with screw lock Characteristic impedance 50 type 7-16 | 0 | Nov, 2024 | Buy | |
| 1931 | IS 5066 : 1969 |
Specification for glass pliers | 0 | Apr, 2025 | Download | |
| 1932 | IS 5067 : 1969 |
SpecificatfOn for fencing pliers | 0 | Apr, 2025 | Download | |
| 1933 | IS 5068 : 1969 |
Specification for grab hook | 0 | Jan, 2025 | Download | |
| 1934 | IS 5087 : 1969 |
Specification for wire stripping pliers | 1 | Mar, 2021 | Download | |
| 1935 | IS 5093 : 1996 (1 Revision) |
Locating pins (Round) - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 1936 | IS 5094 : 1969 |
Dimensions for diamond locating pins | 0 | Mar, 2022 | Download | |
| 1937 | IS 5098 : 1969 |
Specification for cross - Cut and rip saws | 0 | Mar, 2021 | Download | |
| 1938 | IS 510 : 1986 (3 Revision) |
Specification for Blacksmiths anvil (Third Revision) | 0 | Jan, 2025 | Download | |
| 1939 | IS 5100 : 1969 |
Specification for twist drills, parallel shanks, stub series for right hand cutting | 2 | Aug, 2024 | Download | |
| 1940 | IS 5101 : 1991 (1 Revision) |
Twist drills, parallel shank, jobber series -- Specification (first revision) | 0 | Nov, 2018 | Download | |
| 1941 | IS 5102 : 1969 |
Specification for twist drills, parallel shank, long series | 5 | Sep, 2024 | Download | |
| 1942 | IS 5103 : 1969 |
Specification for twist drills, morse taper shanks | 3 | Aug, 2024 | Download | |
| 1943 | IS 5104 : 1969 |
Specification for twist drills, oversize morse taper shank | 4 | Aug, 2024 | Download | |
| 1944 | IS 5105 : 1969 |
Specification for twist drills, taper square shanks for ratchet braces | 1 | Aug, 2024 | Download | |
| 1945 | IS 5106 : 1969 |
Specification for twist drills, taper square shanks for carpenters braces | 1 | Aug, 2024 | Download | |
| 1946 | IS 5107 : 2004/ISO 2944:2000 (1 Revision) |
Fluid power systems and components - Nominal pressures (First Revision) | 0 | Dec, 2024 | Buy | |
| 1947 | IS 5108 : 1969 |
Recommendation on nominal rates of flow for oil - Hydraulic system elements | 0 | Sep, 2024 | Download | |
| 1948 | IS 5109 : 1969 |
Recommendation on nominal bores for oil - Hydraulic system elements | 0 | Sep, 2024 | Download | |
| 1949 | IS 5114 : 1969 |
Specification for reflectorized signs for mines | 0 | Sep, 2020 | Download | |
| 1950 | IS 5115 : 2022/ISO 12297-2 : 2018 (1 Revision) |
DOMESTIC STORAGE TYPE WATER HEATERS FOR USE WITH LPG SPECIFICATION First Revision | 0 | ---- | Buy | |
| 1951 | IS 5122 : 1969 |
Specification for tyre levers | 0 | Jan, 2025 | Download | |
| 1952 | IS 5123 : 1969 |
Specification for tenon and dovetail saws | 0 | Mar, 2021 | Download | |
| 1953 | IS 5139 : 1995 (1 Revision) |
Repair of cast iron castings by Oxy - Acetylene and manual metal arc welding - Recommendations (First Revision) | 0 | Mar, 2021 | Download | |
| 1954 | IS 5146 : 1969 |
Specification for sounding sextant | 0 | Mar, 2021 | Download | |
| 1955 | IS 5148 : 1969 |
Specification for hand magnifiers (Circular) - 50, 75 and 100 mm | 0 | Mar, 2021 | Download | |
| 1956 | IS 5153 : 1969 |
Specification for proportional compasses - 150, 200 and 300 mm | 1 | Mar, 2019 | Download | |
| 1957 | IS 516 : Part 2 : Sec 3 : 2022/ISO 19085-4 : 2018 (1 Revision) |
Hardened Concrete - Methods of Test: Part 2 Properties of Hardened Concrete other than Strength: Section 3 Oxygen Permeability Index ( First Revision ) | 0 | ---- | Buy | |
| 1958 | IS 516 : Part 2 : Sec 4 : 2021/ISO 4266-5:2002 |
Hardened concrete - Methods of test: Part 2 Properties of hardened concrete other than strength: Section 4 Determination of the carbonation resistance by accelerated carbonation method (first revision) | 0 | ---- | Buy | |
| 1959 | IS 516 : Part 5 : Sec 2 : 2021/ISO 16092-3 : 2017 |
Hardened concrete - Methods of test Part 5 Non-destructive testing: Section 2 Half-cell potentials of uncoated reinforcing steel in concrete (first revision) | 0 | ---- | Buy | |
| 1960 | IS 5169 : 1986 (1 Revision) |
Specification for hacksaw frames (First Revision) | 0 | Jan, 2025 | Download | |
| 1961 | IS/ISO 5170 : 1977/ISO 5170 : 1977 |
Machine tools - Lubrication systems | 0 | May, 2023 | Buy | |
| 1962 | IS 5176 : 2023/ISO 6336-1 (2 Revision) |
Textiles - Hawser laid hemp rope - Specification | 1 | ---- | Buy | |
| 1963 | IS 5200 : 1998 (1 Revision) |
Bolt clippers - Specification (First Revision) | 0 | Jan, 2025 | Download | |
| 1964 | IS 5201 : 1969 |
Methods for sampling of abrasive emery grain | 0 | Oct, 2020 | Download | |
| 1965 | IS 5204 : 1969 |
Specifiction for research microscope | 3 | Mar, 2021 | Download | |
| 1966 | IS 5205 : 1969 |
Specification for drawing pins | 0 | Mar, 2019 | Download | |
| 1967 | IS 5206 : 1983 (1 Revision) |
Specification for covered electrodes for manual metal arc welding of stainless steel and other similar high alloy steels (First Revision) | 0 | Jan, 2024 | Download | |
| 1968 | IS/ISO 5210 : 2017/ISO 5210 |
Industrial Valves — Multi-Turn Valve Actuator Attachments | 0 | ---- | Buy | |
| 1969 | IS/ISO 5211 : 2017/ISO 5211 |
Industrial Valves — Part-Turn Actuator Attachments | 0 | ---- | Buy | |
| 1970 | IS 5213 : 1969 |
Specification for french curves for drawing office use | 1 | Mar, 2019 | Download | |
| 1971 | IS 5225 : 1992 (1 Revision) |
Meteorology - Raingauge, non - Recording - Specification (First Revision) | 0 | Feb, 2019 | Download | |
| 1972 | IS 5228 : 2017 (2 Revision) |
Continuous movement monocable ropeways with fixed grips - Code of practice (Second Revision) | 1 | Oct, 2022 | Download | |
| 1973 | IS 5229 : 2017 (2 Revision) |
Continuous movement monocable ropeways with automatic grip - Code of practice (Second Revision) | 0 | Oct, 2022 | Download | |
| 1974 | IS 5230 : 2017 (2 Revision) |
To and fro (Jig Back) movement Bi - Cable ropeways - Code of practice (Second Revision) | 0 | Oct, 2022 | Download | |
| 1975 | IS 5235 : 1992 (2 Revision) |
Meteorology - raingauges recording - specification (First Revision) | 1 | Jan, 2024 | Download | |
| 1976 | IS 5245 : Part 2 : 2013 (1 Revision) |
Methods for splicing of wire ropes: Part 2 wire rope sling legs with ferrule - Secured eye terminal (First Revision) | 0 | Mar, 2024 | Download | |
| 1977 | IS 5257 : 1969 |
Specification for eyepiece and screen graticules for determination of particle size of powders | 0 | Jun, 2020 | Download | |
| 1978 | IS 5258 : 1969 |
Determination of particle size of powders by optical microscope method | 0 | Jun, 2020 | Download | |
| 1979 | IS 5267 : 2002/ISO 1122-2 (1 Revision) |
Vocabulary of gear terms - Definitions related to worm gear geometry (First Revision) | 0 | Mar, 2023 | Buy | |
| 1980 | IS 5268 : Part 1 : 1991 (1 Revision) |
Engineering metrology - Straightedges: Part 1 cast iron straightedges (bow shaped or camel back type and 1-Section or parallel type) (First Revision) | 1 | Mar, 2022 | Download | |
| 1981 | IS 5273 : 1969 |
Specification for radius gauges | 2 | Jan, 2024 | Download | |
| 1982 | IS 5282 : 1969 |
Liquid sedimentation methods for determination of particle size of powders | 0 | Jun, 2020 | Download | |
| 1983 | IS 530 : 1976 (2 Revision) |
Specification for solid - Woven impregnated hair belting for power transmission (Second Revision) | 0 | Jul, 2024 | Download | |
| 1984 | IS 5319 : 1987 (1 Revision) |
Commercial steel, wool (First Revision) | 1 | Sep, 2024 | Download | |
| 1985 | IS 5321 : 2022 (1 Revision) |
Specification for Soda lime as Carbon dioxide absorbent (first revision) | 0 | ---- | Download | |
| 1986 | IS/ISO 5344 : 2004/ISO 5344 : 2004 (1 Revision) |
Electrodynamic vibration generating systems - Performance characteristics (First Revision) | 1 | Sep, 2022 | Buy | |
| 1987 | IS/ISO 5349 : Part 1 : 2001/ISO 5349 : Part 1 : 2001 |
Mechanical vibration - Measurement and evaluation of human exposure to handtransmitted vibration: Part 1 general requirements (First Revision) | 0 | Sep, 2022 | Buy | |
| 1988 | IS/ISO 5349 : PART 2 : 2001/ISO 5349 : PART 2 : 2001 (1 Revision) |
Mechanical vibration - Measurement and evaluation of human exposure to handtransmitted vibration: Part 2 practical guidance for measurement at the workplace (First Revision) | 1 | Sep, 2022 | Buy | |
| 1989 | IS 5359 : 1987 (1 Revision) |
Specification for sine bars (First Revision) | 0 | Feb, 2025 | Download | |
| 1990 | IS 5360 : 1969 |
Dimensions for driving tenons | 0 | Aug, 2024 | Download | |
| 1991 | IS 5362 : 1969 |
Specification for twist drills, parallel shanks, stub series, left hand cutting tor automatics | 1 | Aug, 2024 | Download | |
| 1992 | IS 5363 : 2017 (2 Revision) |
Micro-drills -- Specification (second revision) | 0 | ---- | Download | |
| 1993 | IS 5364 : 1969 |
Specification for twist drills for taper pin holes with taper 1 : 50 | 0 | Aug, 2024 | Download | |
| 1994 | IS 5365 : 1991 (2 Revision) |
Core drills, parallel shanks -- Specification (second revision ) | 0 | Nov, 2018 | Download | |
| 1995 | IS 5366 : 1978 (1 Revision) |
Specification for core drills, morse taper shanks (first revision) | 2 | Aug, 2024 | Download | |
| 1996 | IS 5368 : 1969 |
Specification for thin slotted and castle nuts (Dia Range 6 To 52 Mm) | 1 | Feb, 2021 | Download | |
| 1997 | IS 5370 : 1969 |
Specification for plain washers with outside diameter 3 x inside diameter | 1 | Feb, 2021 | Download | |
| 1998 | IS 5371 : 1982 (1 Revision) |
Specification for multi - Tooth lock washers (First Revision) | 0 | Feb, 2021 | Download | |
| 1999 | IS 5372 : 1975 (1 Revision) |
Specification for taper washers for channels (ISMC) (First Revision) | 0 | Feb, 2021 | Download | |
| 2000 | IS 5373 : 1969 |
Specification for square washers for wood fastenings | 1 | Feb, 2021 | Download | |
| 2001 | IS 5374 : 1975 (1 Revision) |
Specification for taper washers for I - Beams (Ismb) (First Revision) | 0 | Feb, 2021 | Download | |
| 2002 | IS 5383 : 2021/ISO 19235:2015 (3 Revision) |
Tooth Powder -Specification | 0 | ---- | Buy | |
| 2003 | IS 5388 : 1983 (2 Revision) |
Specification for hexagon handles for plain and threaded plug gauges (Second Revision) | 1 | Feb, 2019 | Download | |
| 2004 | IS 5415 : 1969 |
Code of practice for packing and packaging of optical and mathematical instruments and components | 0 | Mar, 2019 | Download | |
| 2005 | IS 5421 : 2013 (2 Revision) |
Glossary of terms relating to test sieves and test sieving (Second Revision) | 0 | Feb, 2023 | Buy | |
| 2006 | IS 5440 : 1969 |
Specification for optical flats | 1 | Jan, 2020 | Download | |
| 2007 | IS 5441 : 1986 (1 Revision) |
Specification for portable pneumatic drilling machine (First Revision) | 0 | Jun, 2021 | Download | |
| 2008 | IS 5444 : 1978 (1 Revision) |
Specification for parallel hand reamers with parallel shanks (first revision) | 2 | Nov, 2018 | Download | |
| 2009 | IS 5445 : 1978 (1 Revision) |
Specification for long fluted machine reamers with morse taper shanks (first revision) | 2 | Nov, 2018 | Download | |
| 2010 | IS 5446 : 2017 (2 Revision) |
Machine chucking reamers with parallel shanks -- Specification (second revision) | 0 | ---- | Download | |
| 2011 | IS 5447 : 2017 (2 Revision) |
Machine chucking reamers with morse taper shank -- Specification (second revision) | 0 | ---- | Download | |
| 2012 | IS 548 : Part 3 : Sec 3 : 2021/IEC 60974-9 : 2018 |
METHODS OF SAMPLING AND TEST FOR OILS AND FATS - PART 3 ADVANCED INSTRUMENTAL METHODS SECTION 3 DETERMINATION OF THE TRIACYLGLYCEROL COMPOSITION OF FATS AND OILS BY CAPILLARY GAS CHROMATOGRAPHY (Adoption of ISO/TS 17383 : 2014) | 0 | ---- | Buy | |
| 2013 | IS 549 : 2005/ISO 1234 : 1997 (2 Revision) |
Split pins - Specification (Third Revision) | 4 | Feb, 2021 | Buy | |
| 2014 | IS/ISO 55002 : 2018/ISO 10360-12:2016 (1 Revision) |
Asset Management Management Systems Guidelines for the application of ISO 55001 | 0 | Sep, 2024 | Buy | |
| 2015 | IS 551 : 2018/ISO 525 : 2013 (4 Revision) |
Bonded abrasive products - General requirements (Fourth Revision | 0 | Mar, 2018 | Buy | |
| 2016 | IS 5511 : 1991 (1 Revision) |
Covered electrodes for manual metal arc welding of cast iron - Specification (First Revision) | 1 | Jan, 2024 | Download | |
| 2017 | IS 552 : 1965 |
Specification for smith bits (Revised) | 0 | Jan, 2025 | Download | |
| 2018 | IS 5530 : 2005 (1 Revision) |
Recommendations for production, rectification and repair of steel castings by metal arc welding process (Second Revision) | 0 | Sep, 2023 | Download | |
| 2019 | IS 554 : 1999/ISO 7-11 : 1994 (4 Revision) |
Pipe threads where pressure - Tight joints are made on the threads - Dimensions, tolerances and designation (Fourth Revision) | 1 | Apr, 2024 | Buy | |
| 2020 | IS 5548 : 1970 |
SpeciftCation for lubricating nipple adaptors | 0 | Sep, 2024 | Download | |
| 2021 | IS 5554 : 1991 (1 Revision) |
Lock washers with lug - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 2022 | IS 5556 : 1991 (1 Revision) |
Serratedlockwashers - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 2023 | IS 5559 : 1984 (1 Revision) |
Specification for oilers (First Revision) | 0 | Sep, 2024 | Download | |
| 2024 | IS 5568 : 1978 (1 Revision) |
Dimensions for tenons and cross -- Slots with taper bore 1 : 30 (first revision) | 1 | Jun, 2023 | Download | |
| 2025 | IS 5593 : 1980 (1 Revision) |
Specification for belt fasteners (Alligator Type) (First Revision) | 3 | Feb, 2021 | Download | |
| 2026 | IS 5604 : 1984 (1 Revision) |
Specification for hand - Operated universal gearless pulling and lifting machines (First Revision) | 1 | Oct, 2020 | Download | |
| 2027 | IS/ISO 5609 : Part 1 : 2012/ISO 5609-1 : 2012 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 1 Designation, styles, dimensions and calculation for corrections | 0 | ---- | Buy | |
| 2028 | IS/ISO 5609 : Part 3 : 2012/ISO 1984-1 |
Tool holders for internal turning with cylindrical shank for indexable inserts: Part 3 Style K | 0 | Mar, 2022 | Buy | |
| 2029 | IS 5610 : 1993 (2 Revision) |
Chloro - Fluoro Hydrocarbons of the Methane and Ethane Series - Specification (Second Revision) | 0 | Aug, 2022 | Download | |
| 2030 | IS 5635 : 1983 (1 Revision) |
Specification for automotive V - Belt drives (First Revision) | 1 | Feb, 2021 | Download | |
| 2031 | IS 5657 : 1970 |
Specification for jim crows | 1 | Mar, 2021 | Download | |
| 2032 | IS 5658 : 1990 (1 Revision) |
Snipe nose pliers - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 2033 | IS 5663 : 1970 |
Specification for Brick and Mason | 0 | Mar, 2021 | Download | |
| 2034 | IS 5664 : 2019 (2 Revision) |
Lubricating connectors - Specification (Second Revision) | 0 | ---- | Download | |
| 2035 | IS 5669 : 2019/ISO 15 : 2017 (2 Revision) |
Rolling bearings -- Radial bearings -- Boundary dimensions, general plan (Second Revision) | 0 | May, 2023 | Buy | |
| 2036 | IS 5670 : 1984 (1 Revision) |
Specification for lead thiocyanate for explosive and pyrotechnic compositions (First Revision) | 1 | Apr, 2021 | Download | |
| 2037 | IS 5671 : 1984 (1 Revision) |
Specification for strontium nitrate for pyrotechnic compositions (First Revision) | 1 | Apr, 2021 | Download | |
| 2038 | IS 5684 : 1970 |
Specification for pipe vices (Chain Type) | 1 | Mar, 2021 | Download | |
| 2039 | IS 5687 : 1970 |
Glossary of terms relating to welding of plastics | 0 | Jan, 2019 | Download | |
| 2040 | IS 5693 : 1988 (1 Revision) |
Specification for countersinks 90°, with parallel shanks and solid pilots (first revision) | 1 | Aug, 2024 | Download | |
| 2041 | IS 5694 : 1970 |
Specification For Engineers, Drawing Instruments, Dotting Pens | 1 | Mar, 2019 | Download | |
| 2042 | IS 5697 : 1970 |
Specification for ripping chisels | 1 | Mar, 2021 | Download | |
| 2043 | IS 5698 : 1970 |
Specification for rotary form - relieved gear cutters for spur and helical gears | 3 | Aug, 2024 | Download | |
| 2044 | IS 5702 : 1970 |
Specification for flat thread rolling dies | 0 | Aug, 2024 | Download | |
| 2045 | IS 5703 : 1988 (1 Revision) |
Specification for countersinks 90° with morse taper shanks and detachable pilots (first revision) | 0 | Aug, 2024 | Download | |
| 2046 | IS 5704 : 1988 (1 Revision) |
Specification for counterbores with parallel shanks and solid pilots (first revision) | 0 | Aug, 2024 | Download | |
| 2047 | IS 5705 : 1988 (1 Revision) |
Specification for detachable pilots for use with counterbores and countersink 90 degree (first revision) | 2 | Aug, 2024 | Download | |
| 2048 | IS 5706 : 1993 (1 Revision) |
Optical instruments - Spirit levels for use in precision engineering - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 2049 | IS 5710 : 1988 (1 Revision) |
Specification for counterbores with morse taper shanks and detachable pilots (first revision) | 0 | Aug, 2024 | Download | |
| 2050 | IS 5713 : 1981 (1 Revision) |
Specification for manganese dioxide for explosive and pyrotechnic compositions (First Revision) | 0 | Apr, 2021 | Download | |
| 2051 | IS 5726 : 1970 |
Specification For Engineers Drawing Instruments, Bordering Pens | 1 | Mar, 2019 | Download | |
| 2052 | IS 5731 : 1970 |
Specification for antimony sulphide for explosive and pyrotechnic compositions | 2 | Apr, 2021 | Download | |
| 2053 | IS 5737 : 1970 |
Specification For Engineers Drawing Instruments, Curve Pens | 0 | Mar, 2019 | Download | |
| 2054 | IS 5749 : 1970 |
Specification for forged ramshorn hooks | 1 | Jan, 2023 | Download | |
| 2055 | IS 5760 : 1998 (2 Revision) |
Argon, Compressed and Liquid - Specification (Second Revision) | 1 | Feb, 2021 | Download | |
| 2056 | IS 5798 : 1970 |
Specification for mercury barometers | 1 | Jun, 2023 | Download | |
| 2057 | IS 5799 : 1970 |
Specificatioti for windvane | 0 | Mar, 2017 | Download | |
| 2058 | IS 5836 : 1977 (1 Revision) |
Specification for inner wire, ropes for automobile control cables (First Revision) | 0 | Feb, 2022 | Download | |
| 2059 | IS 5844 : 2014 (1 Revision) |
Hydrostatic stretch testing of compressed gas cylinders - Recommendations (First Revision) | 0 | Jan, 2024 | Download | |
| 2060 | IS 5857 : 1970 |
Specification for nickel and nickel alloy bare solid welding rods and electrodes | 0 | Jan, 2024 | Download | |
| 2061 | IS 5881 : 1984 (1 Revision) |
Specification for taper pin hand reamers (first revision) | 1 | Jan, 2021 | Download | |
| 2062 | IS 5882 : 1970 |
Specification for socket reamers with parallel shanks | 2 | Nov, 2018 | Download | |
| 2063 | IS 5897 : 1985 (1 Revision) |
Specification for aluminium and aluminium alloy welding rods and wires and magnesium alloy welding rods (First Revision) | 0 | Jan, 2024 | Download | |
| 2064 | IS 5900 : 1970 |
Specification for hair hygrograph | 1 | Feb, 2019 | Download | |
| 2065 | IS 5901 : 1970 |
Specification for thermograph, bimetallic | 1 | Feb, 2019 | Download | |
| 2066 | IS 5903 : 2014 (1 Revision) |
Recommendation for safety devices for gas cylinders (First Revision) | 3 | Mar, 2024 | Download | |
| 2067 | IS 5907 : 1970 |
Specification for socket reamers with morse taper shanks | 3 | Nov, 2018 | Download | |
| 2068 | IS 5912 : 1997 (1 Revision) |
Specification for anemometer, cup counter (First Revision) | 1 | Feb, 2019 | Download | |
| 2069 | IS 5918 : 1984 (1 Revision) |
Specification for taper pin, machine reamers with morse taper shanks (first revision) | 2 | Jan, 2021 | Download | |
| 2070 | IS 5919 : 2018/ISO 2238 : 2011 (2 Revision) |
Machine bridge reamers (second revision) | 0 | ---- | Buy | |
| 2071 | IS 5920 : 1970/ISO 10110-1 |
Recommendation for preparation of drawings for optical elements and systms | 1 | Apr, 2025 | Buy | |
| 2072 | IS 5922 : 1970 |
Qualifying tests for welders engaged in aircraft welding | 1 | Jan, 2019 | Download | |
| 2073 | IS 5924 : 1988 (1 Revision) |
Specification for clock mechanisms and drums for meteorological instruments (First Revision) | 1 | Feb, 2019 | Download | |
| 2074 | IS 5926 : 1970 |
Specification for shell reamers | 2 | Nov, 2018 | Download | |
| 2075 | IS 5927 : 1981 (1 Revision) |
Specification for reduction sleeves 7/24 tapers to morse tapers (first revision) | 0 | Aug, 2024 | Download | |
| 2076 | IS 5928 : 1970 |
Specification for tangent clinometer | 0 | Mar, 2021 | Download | |
| 2077 | IS 5932 : 2019/ISO 104 (2 Revision) |
Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan (Second Revision) | 0 | May, 2023 | Buy | |
| 2078 | IS 5934 : 1999/ISO 582 : 1995 (2 Revision) |
Rolling bearings -- Chamfer dimensions -- Maximum values -- Specification (Second Revision) | 0 | Dec, 2022 | Buy | |
| 2079 | IS 5935 : Part 1 : 2019/ISO 5753-1 : 2009 |
Rolling bearings -- Internal clearance: Part 1 Radial internal clearance for radial bearings (Second Revision) | 0 | May, 2023 | Buy | |
| 2080 | IS 5935 : Part 2 : 2019/ISO 5753-2 : 2010 |
Rolling bearings - Internal clearance: Part 2 axial internal clearance for four - Point - Contact ball bearings | 0 | May, 2023 | Buy | |
| 2081 | IS 5936 : 1981 (1 Revision) |
Specification for arbors with morse taper shanks for shell tools (first revision) | 0 | Nov, 2018 | Download | |
| 2082 | IS 5939 : 1970 |
Specification for single angle sine tables | 0 | Mar, 2022 | Download | |
| 2083 | IS 5943 : 1970 |
Specification for compound angle sine tables | 0 | Mar, 2022 | Download | |
| 2084 | IS 5945 : 1970 |
Specification for barograph, aneroid | 1 | Feb, 2019 | Download | |
| 2085 | IS 5946 : 1992 (1 Revision) |
Meteorology - Whirling psychrometer - Specification (First Revision) | 0 | Feb, 2019 | Download | |
| 2086 | IS 5947 : 1970 |
Charts for recording meteorological instruments | 1 | Feb, 2019 | Download | |
| 2087 | IS 5948 : 1970 |
Specification for thermometer screens | 0 | Jun, 2022 | Download | |
| 2088 | IS 5957 : 2003/ISO 1478:1999 (2 Revision) |
Screw threads for thread forming tapping screws dimensions (Second Revision) | 0 | Apr, 2023 | Buy | |
| 2089 | IS 5972 : 2022/ISO 8000-140 (1 Revision) |
GLOSSARY OF PNEUMATIC AND HYDRAULIC CONVEYING TERMS AND DEFINITIONS First revision of IS 5972 | 0 | ---- | Buy | |
| 2090 | IS 5973 : 1998 (1 Revision) |
Pan Evaporimeter - Specification (First Revision) | 0 | Feb, 2019 | Download | |
| 2091 | IS 5979 : 1981 (1 Revision) |
Specification for sine centres (First Revision) | 0 | Mar, 2022 | Download | |
| 2092 | IS 5980 : 1978 (1 Revision) |
Specification for bench centres (Firsf Revision) | 0 | Jan, 2020 | Download | |
| 2093 | IS/ISO 5982 : 2019/5982:2019 (1 Revision) |
Mechanical Vibration and Shock — Range of Idealized Values to Characterize Human Biodynamic Response Under Whole-Body Vibration ( First Revision ) | 0 | ---- | Buy | |
| 2094 | IS 5989 : 1998 (2 Revision) |
Hole mills -- Specification (second revision) | 0 | Aug, 2024 | Download | |
| 2095 | IS 5991 : 1971 |
Specification for ballast rakes | 1 | Mar, 2021 | Download | |
| 2096 | IS 5994 : 2022/16610-85 : 2013 (4 Revision) |
Agricultural Tractors - Test Code (Fourth Revision) | 0 | ---- | Buy | |
| 2097 | IS 5995 : 1971 |
Specification for pipe grip pliers | 1 | Mar, 2021 | Download | |
| 2098 | IS 6000 : 1971 |
Specification for rail tongs for railways | 0 | Mar, 2021 | Download | |
| 2099 | IS 6002 : 1992 (1 Revision) |
Tommy bars for box spanners - Specification (First Revision) | 0 | Apr, 2025 | Download | |
| 2100 | IS/IEC 60068 : Part 1 : 2013/ISO 239: 1999 |
Environmental Testing Part 1 General and Guidance | 0 | Feb, 2025 | Buy | |
| 2101 | IS/IEC 60068 : Part 2 : Sec 38 : 2021/ISO 11031 |
Environmental Testing Part 2 Tests Section 5 Test ZAD: Composite TemperatureHumidity Cyclic test | 0 | Mar, 2025 | Buy | |
| 2102 | IS/IEC 60068 : Part 2 : Sec 47 : 2005/ISO 9374-5 |
Environmental Testing Part 2 Tests Section 47 Mounting of specimens for vibration impact and similar dynamic tests | 0 | Mar, 2025 | Buy | |
| 2103 | IS 6007 : 1971 |
Specification for pipe vices (Hinged Type) | 0 | Mar, 2021 | Download | |
| 2104 | IS/ISO 6011 : 2003/ISO 6011 : 2003 |
Earth - Moving machinery - Visual display of machine operation | 0 | Mar, 2022 | Buy | |
| 2105 | IS/ISO 6014 : 1986/ISO 6014 : 1986 |
Earth - Moving machinery - Determination of ground speed | 0 | Mar, 2022 | Buy | |
| 2106 | IS 6016 : 2009/ISO 3253 : 1998 (2 Revision) |
Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes (Second Revision) | 0 | Mar, 2021 | Buy | |
| 2107 | IS/ISO 603 : Part 1 : 1999/ISO 603-1:1999 |
Bonded abrasive products - Dimensions: Part 1 grinding wheels for external cylindrical grinding between centres | 0 | Jun, 2023 | Buy | |
| 2108 | IS/ISO 603 : Part 2 : 1999/ISO 603-2:1999 |
Bonded abrasive products - Dimensions: Part 2 grinding wheels for centreless external cylindrical grinding | 0 | Jun, 2023 | Buy | |
| 2109 | IS/ISO 603 : Part 3 : 1999/ISO 603 : PART 3 : 1999 |
Bonded Abrasive Products- Dimensions Part 3 Grinding Wheels for Internal Cylindrical Grinding | 0 | Jun, 2023 | Buy | |
| 2110 | IS/ISO 603 : Part 4 : 1999/ISO 603-4:1999 |
Bonded abrasive products - Dimensions: Part 4 grinding wheels for surface grinding / peripheral grinding | 0 | Jun, 2023 | Buy | |
| 2111 | IS/ISO 603 : Part 5 : 2018/ISO 603-5 : 1999 |
Bonded Abrasive Products- Dimensions Part 5 Grinding Wheels for Surface Grinding/Face Grinding | 0 | Jun, 2023 | Buy | |
| 2112 | IS/ISO 603 : Part 6 : 1999/ISO 603-6 |
Bonded Abrasive Products - Dimensions Part 6 Grinding Wheels for Tool and Tool Room Grinding | 0 | Jun, 2023 | Buy | |
| 2113 | IS/ISO 603 : Part 7 : 1999/ISO 603-7 : 1999 |
Bonded Abrasive Products — Dimensions Part 7 Grinding Wheels for Manually Guided Grinding | 0 | Jun, 2023 | Buy | |
| 2114 | IS/ISO 603 : Part 8 : 1999/ISO 603-8 : 1999 |
Bonded Abrasive Products — Dimensions Part 8 Grinding Wheels for Deburring and Fettling / Snagging | 0 | Jun, 2023 | Buy | |
| 2115 | IS/ISO 603 : Part 9 : 1999/ISO 603-9 : 1999 |
Bonded Abrasive Products — Dimensions Part 9 Grinding Wheels for High-Pressure Grinding | 0 | Jun, 2023 | Buy | |
| 2116 | IS/ISO 603 : Part 10 : 1999/ISO 603-10:1999 |
Bonded abrasive products - Dimensions: Part 10 stones for honing and superfinishings | 0 | Jun, 2023 | Buy | |
| 2117 | IS/ISO 603 : Part 11 : 1999/ISO 603-11 : 1999 |
Bonded abrasive products — Dimensions Part 11 Hand Finishing Sticks | 0 | Jun, 2023 | Buy | |
| 2118 | IS/ISO 603 : Part 12 : 1999/ISO 603-12 : 1999 |
Bonded Abrasive Products — Dimensions Part 12 Grinding Wheels for Deburring and Fettling on a Straight Grinder | 0 | Jun, 2023 | Buy | |
| 2119 | IS/ISO 603 : Part 13 : 1999/ISO 603-13 : 1999 |
Bonded Abrasive Products — Dimensions Part 13 Grinding Wheels for Deburring and Fettling on a Vertical Grinder | 0 | Jun, 2023 | Buy | |
| 2120 | IS/ISO 603 : Part 14 : 1999/ISO 603-14 : 1999 |
Bonded Abrasive Products — Dimensions Part 14 Grinding Wheels for Deburring and Fettling / Snagging on an Angle Grinder | 0 | Jun, 2023 | Buy | |
| 2121 | IS/ISO 603 : Part 15 : 1999/ISO 603-15 : 1999 |
Bonded Abrasive Products — Dimensions Part 15 Grinding Wheels for Cutting-Off on Stationary or Mobile Cutting-Off Machines | 0 | Jun, 2023 | Buy | |
| 2122 | IS/ISO 603 : Part 16 : 1999/ISO 603-16 : 1999 |
Bonded Abrasive Products — Dimensions Part 16 Grinding Wheels for Cutting-off on Hand Held Power Tools | 0 | Jun, 2023 | Buy | |
| 2123 | IS/ISO 603 : Part 17 : 2014/ISO 603-17 : 1999 |
Bonded Abrasive Products — Dimensions Part 17 Spindle Mounted Wheels ( ISO Type 52 ) | 0 | Jun, 2023 | Buy | |
| 2124 | IS/ISO 603 : Part 18 : 1999/ISO 603-18 :2013 |
Bonded Abrasive Products — Dimensions Part 18 Grinding Wheels for Flat Glass Edge Grinding Machines | 0 | Jun, 2023 | Buy | |
| 2125 | IS/IEC 60368 : Part 2 : Sec 1 : 1988/ISO 7755-8:2013 |
Piezoelectric filters Part 2: Guide to the use of piezoelectric filters Section One Quartz crystal filters | 0 | Feb, 2025 | Buy | |
| 2126 | IS/IEC 60368 : Part 2 : Sec 2 : 1996/ISO 7755-9:2013 |
Piezoelectric filters Part 2: Guide to the use of piezoelectric filters Section 2 Piezoelectric ceramic filters | 0 | Feb, 2025 | Buy | |
| 2127 | IS 6040 : 1993/ISO 1708 : 1985 (1 Revision) |
Test chart for precision lathes - Lathes with swing over bed up to 500 mm and distance between centres up to 1500 mm (First Revision) | 0 | Jan, 2019 | Buy | |
| 2128 | IS 6044 : Part 1 : 2018 (3 Revision) |
Liquefied petroleum gas storage installations - Code of practice: Part 1 residential, commercial and industrial cylinder installations (Third Revision) | 0 | Jan, 2024 | Download | |
| 2129 | IS/IEC 60512 : Part 1 : Sec 1 : 2002/ISO 14839-5:2022 |
Connectors for Electronic Equipment Tests and Measurements Part 1: General examination Section 1: Test 1a: Visual examination | 0 | ---- | Buy | |
| 2130 | IS/IEC 60695 : Part 1 : Sec 30 : 2017 |
Fire Hazard Testing Part 1 Guidance for assessing the fire hazard of electrotechnical products Section 30 Preselection testing process General guidelines | 0 | Mar, 2025 | Download | |
| 2131 | IS/ISO 6070 : 2019/ISO 6070 |
Auxiliary Tables for Vibration Generators — Methods of Describing Equipment Characteristics ( First Revision ) | 0 | ---- | Buy | |
| 2132 | IS 6080 : 1985 (1 Revision) |
Specification for double ended clamps (First Revision) | 0 | Mar, 2022 | Download | |
| 2133 | IS 6081 : 1985 (1 Revision) |
Specification for plain clamps (First Revision) | 0 | Mar, 2022 | Download | |
| 2134 | IS 6082 : 1985 (1 Revision) |
Specification for slotted clamps (First Revision) | 0 | Mar, 2022 | Download | |
| 2135 | IS/IEC 60834 : Part 1 : 1999/14880-4:2006 |
Teleprotection equipment of power systems Performance and testing Part 1: Command systems | 0 | ---- | Buy | |
| 2136 | IS 6086 : 2016/ISO 5747 : 1995 (2 Revision) |
Pliers and nippers - Lever assisted side cutting pliers, end and diagonal cutting nippers - Dimensions and test values (Second Revision) | 0 | Mar, 2021 | Buy | |
| 2137 | IS 6087 : 1971 |
Specification for metal cutting shears | 0 | Mar, 2021 | Download | |
| 2138 | IS 6090 : 1984 (1 Revision) |
Specification for cam operated clamps (First Revision) | 0 | Mar, 2022 | Download | |
| 2139 | IS 6094 : Part 1 : 2006/ISO 4026:2003 (3 Revision) |
Hexagon socket set screws: Part 1 with flat point (Third Revision) | 0 | Apr, 2024 | Buy | |
| 2140 | IS 6094 : Part 2 : 2006/ISO 4027:2003 |
Hexagon socket set screws: Part 2 with cone point (Third Revision) | 0 | Feb, 2021 | Buy | |
| 2141 | IS 6094 : Part 3 : 2006/ISO 4028:2003 |
Hexagon socket set screws: Part 3 with dog point (Third Revision) | 0 | Feb, 2021 | Buy | |
| 2142 | IS 6094 : Part 4 : 2006/ISO 4029:2003 (3 Revision) |
Hexagon socket set screws: Part 4 with cup point (Third Revision) | 0 | Feb, 2021 | Buy | |
| 2143 | IS/IEC 60958 : PART 1 : 2021/ISO 7755-10:2013 (2 Revision) |
Digital Audio Interface Part 1: General Second Revision | 0 | ---- | Buy | |
| 2144 | SP 61 : 1994 |
General guidelines for automatic weather stations | 1 | Feb, 2019 | Download | |
| 2145 | IS 6105 : 1971 |
Specification for feed fingers | 0 | Mar, 2022 | Download | |
| 2146 | IS 6113 : 1970 |
Specification for aluminium fasteners for buildin - g purposes | 0 | Feb, 2021 | Download | |
| 2147 | IS 6118 : 2017/ISO 8976 : 2004 (2 Revision) |
Pliers and nippers - Multiple slip joint pliers - Dimensions and test values (Second Revision) | 0 | Aug, 2024 | Buy | |
| 2148 | IS/IEC 61196 : Part 1 : Sec 1 : 2007/ISO 19085-5 : 2017 |
Coaxial communication cables Part 1 Coaxial cables Section 1 Capability approval | 0 | Nov, 2024 | Buy | |
| 2149 | IS 6129 : 1971 |
Specification for square box wrenches (Spanners) | 0 | Jan, 2025 | Download | |
| 2150 | IS 6130 : 1989 (1 Revision) |
Single square socket tee wrenches (Spanners) - Specification | 0 | Jan, 2025 | Download | |
| 2151 | IS 6131 : 1980 (1 Revision) |
Technical requirements for, hand operated wrenches (Spanners) and sockets (First Revision) | 1 | Aug, 2024 | Download | |
| 2152 | IS 6137 : 1983 (2 Revision) |
Specification for gauging members for plain plug gauges, go and no go members (Size Range From 1 Up to and Including 40 Mm) (Second Revision) | 0 | Feb, 2019 | Download | |
| 2153 | IS 6149 : 1984 (1 Revision) |
Specification for single - Ended open - Jaw adjustable wrenches (First Revision) | 2 | Mar, 2021 | Download | |
| 2154 | IS 6150 : 1971 |
Specification for ISO metric screw thread measuring prisms | 1 | Feb, 2025 | Download | |
| 2155 | IS/ISO 6165 : 2012/ISO 6165 : 2012 |
Earth - Moving machinery - Basic types - Identification and terms and definitions | 0 | Mar, 2022 | Buy | |
| 2156 | IS 6166 : 1971 |
Specification for thin taper keys and keyways | 1 | Jul, 2024 | Download | |
| 2157 | IS 6167 : 1971 |
Specification for thin parallel keys and keyways | 1 | May, 2024 | Download | |
| 2158 | IS 6173 : Part 1 : 1992 (1 Revision) |
Screwing taps -- Dimensions and tolerances on threaded portion: Part 1 For ISO metric screw threads (first revision) | 1 | Aug, 2024 | Download | |
| 2159 | IS 6173 : Part 2 : 1992 (1 Revision) |
Screwing taps -- Dimensions and tolerances of threaded portion: Part 2 For pipe screw threads G, Rp and Rc series | 1 | Aug, 2024 | Download | |
| 2160 | IS 6175 : Part 1 : 1992 (2 Revision) |
Screwing taps: Part 1 Hand and short machine screwing taps for ISO metric screw threads sizes ml to m2.5 -- Specification (second revision) | 1 | Aug, 2024 | Download | |
| 2161 | IS 6175 : Part 2 : 1992 (2 Revision) |
Screwing taps: Part 2 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m10 -- Specification (second revision) | 1 | Aug, 2024 | Download | |
| 2162 | IS 6175 : Part 3 : 1992 (2 Revision) |
Screwing taps: Part 3 Hand and short machine screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches and m3 to m100 with fine pitches -- Specification (second revision) | 1 | Aug, 2024 | Download | |
| 2163 | IS 6175 : Part 4 : 1991 |
Screwing taps: Part 4 Long shank machine screwing taps for ISO metric screw threads sizes from m3 to m24 -- Specification | 2 | Aug, 2024 | Download | |
| 2164 | IS 6175 : Part 5 : 1991 |
Screwing taps: Part 5 Nut screwing taps for ISO metric screw threads sizes m3 to m68 with coarse pitches -- Specification | 1 | Aug, 2024 | Download | |
| 2165 | IS 6175 : Part 6 : 1992 |
Screwing taps: Part 6 Screwing taps for pipe threads parallel g series -- Specification | 1 | Aug, 2024 | Download | |
| 2166 | IS 6175 : Part 7 : 1992 |
Screwing taps: Part 7 Screwing taps for pipe threads parallel rc series -- Specification | 1 | Sep, 2024 | Download | |
| 2167 | IS 6175 : Part 8 : 1992 |
Screwing taps: Part 8 Screwing taps for pipe threads taper rc series -- Specification | 1 | Aug, 2024 | Download | |
| 2168 | IS 6196 : 1971 |
Dimensions for fitted half - Couplings | 1 | Dec, 2023 | Download | |
| 2169 | IS/IEC 61968 : Part 1 : 2020/ISO 7755-11:2013 (1 Revision) |
Application integration at electric utilities System Interfaces for distribution management Part 1: Interface architecture and general recommendations | 0 | ---- | Buy | |
| 2170 | IS 6197 : 2019/ISO 3655 : 1986 (1 Revision) |
Test chart for vertical boring and turning mills with table diameter up to 1600 mm (First Revision) | 0 | May, 2023 | Buy | |
| 2171 | IS/IEC 62056 : Part 6 : Sec 2 : 2017/ISO 13579-3 : 2013 |
Electricity metering data exchange The DLMSCOSEM suite Part 6-2: COSEM interface classes first revision | 0 | ---- | Buy | |
| 2172 | IS 6217 : 1982 (1 Revision) |
Specification for short link chain, grade S (6), non - Calibrated for lifting purposes (First Revision) | 0 | Mar, 2018 | Download | |
| 2173 | IS 6231 : 1971 |
Specification for prismatic angle gauges | 0 | Feb, 2019 | Download | |
| 2174 | IS 6232 : 1971 |
Specification for cast iron box angle plates | 1 | Feb, 2019 | Download | |
| 2175 | IS 6238 : 1971 |
Specification for spring collets | 2 | Mar, 2022 | Download | |
| 2176 | IS 6239 : 2021/ISO 129-1:2018 (3 Revision) |
Textiles - Man-made Fibres - Generic Names (Third Revision) | 0 | ---- | Buy | |
| 2177 | IS 6244 : 1980 (1 Revision) |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 40 To 120 mm) (First Revision) | 1 | Mar, 2022 | Download | |
| 2178 | IS 6246 : 1980 (1 Revision) |
Specification for gauging members for plain plug gauges go and no go members (Size Range Above 120 Up To And Including 250 mm) (First Revision) | 1 | Mar, 2022 | Download | |
| 2179 | IS 6255 : 2013 (3 Revision) |
Inverse dovetail cutters and dovetail cutters with cylindrical shanks (third revision) | 0 | Aug, 2024 | Download | |
| 2180 | IS 6256 : 1995 (1 Revision) |
Shell end single angle milling cutters -- Specification (first revision) | 0 | Jan, 2021 | Download | |
| 2181 | IS 6257 : 1982 (1 Revision) |
Specification for shell end mills (first revision) | 0 | Aug, 2024 | Download | |
| 2182 | IS/IEC 62680 : Part 1 : Sec 1 : 2015/ISO 16610-28 : 2016 |
Universal Serial Bus Interfaces for Data and Power Part 1: Common Components Section 1: USB Battery Charging Specification | 0 | ---- | Buy | |
| 2183 | IS/IEC 62680 : Part 1 : Sec 2 : 2022/ISO 16610-30 : 2015 |
Universal Serial Bus Interfaces for Data and Power Part 1: Common Components Section 2: USB Power Delivery Specification | 0 | ---- | Buy | |
| 2184 | IS/IEC 62680 : Part 2 : Sec 3 : 2015/ISO 15519-1 : 2010 |
Universal Serial Bus Interfaces for Data and Power Part 2-3: Universal Serial Bus Cables and Connectors Class Document | 0 | ---- | Buy | |
| 2185 | IS 6276 : 1971 |
Specification for flexible shafts used in concrete vibrators | 0 | May, 2024 | Download | |
| 2186 | IS 6285 : 1971 |
Dimensions for interchangeability of milling cutters and milling arbors with key drive | 1 | Nov, 2018 | Download | |
| 2187 | IS 6296 : 1983 (1 Revision) |
Specification for short link chain grade S(6) calibrated for pulley blocks and other lifting appliances (First Revision) | 0 | Mar, 2018 | Download | |
| 2188 | IS 6308 : 1982 (1 Revision) |
Specification for side and face milling cutters (first revision) | 0 | Aug, 2024 | Download | |
| 2189 | IS 6309 : 1982 (1 Revision) |
Specification for cylindrical milling cutters (first revision) | 1 | Aug, 2024 | Download | |
| 2190 | IS 6310 : 1971 |
Dimensions for interchangeability of milling cutters and milling arbors with tenon drive | 1 | Nov, 2018 | Download | |
| 2191 | IS 6311 : 1978 (1 Revision) |
Specification for ISO metric screwthread measuring cylinders (First Revision) | 1 | Jan, 2020 | Download | |
| 2192 | IS 6314 : 1982 (1 Revision) |
Specification for single corner rounding milling cutters (first revision) | 0 | Aug, 2024 | Download | |
| 2193 | IS 6322 : 1982 (1 Revision) |
Specification for concave milling cutters (first revision) | 0 | Aug, 2024 | Download | |
| 2194 | IS/IEC/TR 63228 : 2019/ISO 15241 : 2012 |
Measurement Protocols for Photovoltaic Devices Based on Organic, Dye-Sensitized or Perovskite Materials | 0 | ---- | Buy | |
| 2195 | IS 6323 : 1982 (1 Revision) |
Specification for convex milling cutters (first revision) | 0 | Aug, 2024 | Download | |
| 2196 | IS 6324 : 1971 |
Specification for single angle milling cutters | 0 | Aug, 2024 | Download | |
| 2197 | IS 6325 : 1971 |
Specification for double angle milling cutters | 0 | Aug, 2024 | Download | |
| 2198 | IS 6326 : 1996 (1 Revision) |
Equal angle milling cutters -- Specification (first revision) | 0 | Aug, 2024 | Download | |
| 2199 | IS 6335 : 1971 |
Specification for knurled thumb nuts (Fixtures) | 1 | Mar, 2022 | Download | |
| 2200 | IS 6336 : 1989 (1 Revision) |
Screws for thrust pads (Fixtures) - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 2201 | IS 6337 : 1989 (1 Revision) |
Thrust - Pads (Fixtures) - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 2202 | IS 6338 : 1989 (1 Revision) |
Clamping screws (Fixtures) - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 2203 | IS 6352 : 2014 (2 Revision) |
Slot drills with parallel shank -- Specification (second revision) | 0 | Dec, 2019 | Download | |
| 2204 | IS 6353 : 2014 (2 Revision) |
End mills with parallel shank -- Specification (second revision) | 0 | Dec, 2019 | Download | |
| 2205 | IS 6354 : 2017 (2 Revision) |
End mills with morse taper shank -- Specification (second revision) | 0 | ---- | Download | |
| 2206 | IS 6355 : 1982 (1 Revision) |
Specification for keyway milling cutters (first revision) | 1 | Aug, 2024 | Download | |
| 2207 | IS 6356 : 2021/ISO 23247-4 : 2021 (4 Revision) |
TOOTH PASTE - SPECIFICATION | 1 | ---- | Buy | |
| 2208 | IS 6374 : 1971 |
Specification for hexagonal box wrenches (Spanners) | 0 | Mar, 2021 | Download | |
| 2209 | IS 6375 : 1991 (1 Revision) |
Wood splitting wedges - Specification (First Revision) | 0 | Jan, 2025 | Download | |
| 2210 | IS 6379 : 1989 (1 Revision) |
Single ended ring wrenches (Spanners) - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 2211 | IS 6388 : 2017 (2 Revision) |
Slot drills with morse taper shank -- Specification (second revision) | 0 | ---- | Download | |
| 2212 | IS 6389 : 1998 (1 Revision) |
Combination wrenches with equal openings - Specification (Second Revision) | 1 | Apr, 2025 | Download | |
| 2213 | IS/ISO 6392 : Part 2 : 1996/ISO 6392-2 |
Earth - Moving machinery - Lubrication fittings: Part 2 grease - Gun nozzles | 0 | Sep, 2019 | Buy | |
| 2214 | IS/ISO 6393 : 2008/ISO 6393 : 2008 |
Earth - Moving machinery - Determination of sound power level - Stationary test conditions | 0 | Mar, 2023 | Buy | |
| 2215 | IS/ISO 6393 : Part 1 : 2014/ISO 6392-1 |
Earth-Moving Machinery — Lubrication Fittings Part 1 Nipple Type | 0 | Sep, 2019 | Buy | |
| 2216 | IS/ISO 6394 : 2008/ISO 6394 : 2008 |
Earth Moving Machinery- Determination of Emission Sound Pressure Level at Operator's Position- Stationary Test Conditions | 0 | Mar, 2023 | Buy | |
| 2217 | IS/ISO 6395 : 2008/ISO 6395 : 2008 |
Earth - Moving machinery - Determination of sound power level - Dynamic test conditions | 0 | Mar, 2022 | Buy | |
| 2218 | IS/ISO 6396 : 2008/ISO 6396 : 2008 |
Earth-Moving Machinery - Determination of Emission Sound Pressure Level at Operator's Position - Dynamic Test Conditions | 0 | Mar, 2022 | Buy | |
| 2219 | IS/ISO 6405 : Part 1 : 2017/ISO 6405-1:2017 (1 Revision) |
Earth - Moving machinery symbols for operator controls and other displays: Part 1 common symbols (First Revision) | 0 | Mar, 2022 | Buy | |
| 2220 | IS/ISO 6405 : Part 2 : 2017/ISO 6405-2:2017 (1 Revision) |
Earth - Moving machinery - Symbols for operator controls and other displays: Part 2 symbols for specific machines, equipment and accessories (First Revision) | 0 | Mar, 2022 | Buy | |
| 2221 | IS 6409 : 1971 |
Code of practice for Oxy - Acetylene flame cleaning | 0 | Jan, 2019 | Download | |
| 2222 | IS 6413 : 1972 |
Specification for clippers, hair, animal, hand - Operated | 0 | Feb, 2025 | Download | |
| 2223 | IS 6419 : 1996 (1 Revision) |
Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision) | 2 | Mar, 2021 | Download | |
| 2224 | IS 6425 : 1971 |
Specification for dioptometer (Lensometer) | 2 | Mar, 2019 | Download | |
| 2225 | IS 6427 : 2023/ISO 13585:2021 (1 Revision) |
GLOSSARY OF TERMS RELATING TO PILE DRIVING EQUIPMENT (First Revision of IS 6427) | 0 | ---- | Buy | |
| 2226 | IS 6428 : 2023/ISO 6336-2 (1 Revision) |
PILE FRAME SPECIFICATION ( First Revision ) | 0 | ---- | Buy | |
| 2227 | IS 6431 : 1971 |
Tolerances on dimensions of plates cut by flame | 0 | Jan, 2019 | Download | |
| 2228 | IS 6440 : 1997 (1 Revision) |
Quick action drilling jigs - Specification (First Revision) | 0 | Jan, 2019 | Download | |
| 2229 | IS 6453 : 1984 (1 Revision) |
Technical supply conditions for rolling bearings | 1 | Jun, 2020 | Download | |
| 2230 | IS 6454 : 1972 |
Specification for self - Aligning roller bearings | 1 | May, 2021 | Download | |
| 2231 | IS 6455 : 2020 (1 Revision) |
Single Row Deep Groove Ball Bearings — Specification ( First Revision ) | 0 | Apr, 2025 | Download | |
| 2232 | IS 6456 : 1972 |
Specification for double row radial ball bearings | 1 | May, 2021 | Download | |
| 2233 | IS 6458 : 1972 |
Specification for double row cylindrical roller bearings | 1 | Jun, 2020 | Download | |
| 2234 | IS/ISO 6462 : 2011/ISO 6462 : 2011 (1 Revision) |
Face milling cutters with indexable inserts -- Dimensions | 0 | Dec, 2019 | Buy | |
| 2235 | IS 6471 : 1971 |
Specification for spectrometer (Student Type) | 1 | Apr, 2025 | Download | |
| 2236 | IS/ISO 6480 : 1983/ISO 6480 : 1983 |
Conditions of acceptance for horizontal internal broaching machines - Testing of the accuracy | 0 | Jan, 2019 | Buy | |
| 2237 | IS 6498 : 1971 |
Glossary of terms used in connection with pulley blocks | 0 | Oct, 2020 | Download | |
| 2238 | IS 6511 : 1997/ISO 2374:1983 (1 Revision) |
Lifting appliances - Range of maximum capacities for basic models (First Revision) | 0 | Feb, 2023 | Buy | |
| 2239 | IS 6521 : Part 1 : 1972 |
Code of practice for design of tower cranes: Part 1 static and rail amounted | 0 | Oct, 2020 | Download | |
| 2240 | IS 6546 : 1989 (1 Revision) |
Claw hammers - Specification (First Revision) | 1 | Mar, 2021 | Download | |
| 2241 | IS 6547 : 2015 (1 Revision) |
Electric chain hoists - Specification (First Revision) | 0 | Oct, 2020 | Download | |
| 2242 | IS/ISO 6547 : 1981/ISO 6547 : 1981 |
Hydraulic fluid power - Cylinders - Piston seal housings incorporating bearing rings - Dimensions and tolerances | 0 | Dec, 2024 | Buy | |
| 2243 | IS 6549 : 1972 |
Glossary of terms used in connection with lifting tackle | 0 | Oct, 2020 | Download | |
| 2244 | IS 6550 : 1992 (1 Revision) |
Thread milling cutter with parallel shank -- Specification (first revision) | 1 | Aug, 2024 | Download | |
| 2245 | IS 6551 : 1992 (1 Revision) |
Thread milling cutters with morse taper shanks -- Specification (first revision) | 3 | Aug, 2024 | Download | |
| 2246 | IS 6560 : 2017 : 2017/ISO 21952:2012 (2 Revision) |
Welding Consumables- Wire Electrodes, Wires, Rods and Deposits for Gas Shielded Arc Welding of Creep-Resisting Steels- Classfication (Second Revision) | 0 | Mar, 2023 | Buy | |
| 2247 | IS 6573 : 1987 (1 Revision) |
Dimensions for pneumatic coal pick shanks and chuck bushings (First Revision) | 0 | Jun, 2021 | Download | |
| 2248 | IS 6574 : 1987 (1 Revision) |
Dimensions for pneumatic rivet snap shanks parallel and chuck b - ushings (First Revision) | 0 | Jun, 2021 | Download | |
| 2249 | IS 6575 : 1987 (1 Revision) |
Dimensions for pneumatic breaker and spade shanks and ITS chuck bushings (First Revision) | 0 | Jun, 2021 | Download | |
| 2250 | IS 6580 : 1972 |
Specification for train lighting belt fasteners | 1 | Mar, 2023 | Download | |
| 2251 | IS 6590 : 2023/ISO 10110-17:2004 (1 Revision) |
ROPES FOR MOUNTAINEERING � SPECIFICATIONS | 0 | ---- | Buy | |
| 2252 | IS 6609 : Part 1 : 1972 |
Methods of test for commercial blasting explosives and accessories: Part 1 gun powder | 0 | Apr, 2021 | Download | |
| 2253 | IS 6609 : Part 2 : Sec 1 : 1973 |
Methods of test for commercial blasting explosives and accessories: Part 2 explosives: Sec 1 explosives, general | 0 | Apr, 2021 | Download | |
| 2254 | IS 6609 : Part 2 : Sec 2 : 1974 |
Methods of test for commercial blasting explosives and accessories: Part 2 explosives: Sec 2 explosives, permitted | 1 | Apr, 2021 | Download | |
| 2255 | IS 6609 : Part 2 : Sec 3 : 1980 |
Methods of test for commercial blasting explosives and accessories: Part 2 explosives: Sec 3 explosives, slurry | 0 | Apr, 2021 | Download | |
| 2256 | IS 6609 : Part 5 : 1972 |
Methods of test for commercial blasting explosives and accessories: Part 4 safety fuses | 0 | Apr, 2021 | Download | |
| 2257 | IS 6610 : 1972 |
Specification for heavy washers for steel structures | 0 | Feb, 2021 | Download | |
| 2258 | IS 6623 : 2004 (2 Revision) |
High Strength Structural Nuts | 1 | Feb, 2021 | Download | |
| 2259 | IS 663 : 1980 (2 Revision) |
Specification for adzes (Second Revision) | 0 | Apr, 2025 | Download | |
| 2260 | IS 6639 : 1972 |
Specification for hexagon bolts for steel structures | 5 | Feb, 2021 | Download | |
| 2261 | IS 6649 : 1985 (1 Revision) |
Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision) | 1 | Feb, 2021 | Download | |
| 2262 | IS 6652 : Part 1 : 1986 (1 Revision) |
Glossary of terms relating to metal forming machines and tools part 1 metal forming tools (First Revision) | 0 | Mar, 2021 | Download | |
| 2263 | IS 6652 : Part 2 : 1986 (1 Revision) |
Glossary of terms relating to metal forming machines and tools: Part 2 metal forming machines relating to sheet metal (First Revision ) | 0 | Mar, 2021 | Download | |
| 2264 | IS 6652 : Part 3 : 1986 (1 Revision) |
Glossary of terms relating to metal for - Ming machines and tools: Part 3 metal forming technology and operations relating to sheet metal ( first revision ) | 0 | Apr, 2022 | Download | |
| 2265 | IS 666 : Part 1 : 1972 (2 Revision) |
Specification for jig bushes: Part 1 headed and headless jig bushes (Second Revision) | 1 | Sep, 2018 | Download | |
| 2266 | IS 666 : Part 2 : 1972 (2 Revision) |
Specification for jig bushes: Part 2 renewable drill bushes (Second Revision) | 2 | Sep, 2018 | Download | |
| 2267 | IS 6679 : 1972 |
Test chart for general purpose gear shaping machines (Table Diameter Up To 1000 Mm) | 1 | Jan, 2019 | Download | |
| 2268 | IS 6681 : 1972 |
Dimensions for self-release 7/24 tapers for spindle noses for milling machines | 2 | Nov, 2018 | Download | |
| 2269 | IS 6682 : 1991 (1 Revision) |
Morse taper extension sockets -- Specification (first revision) | 1 | Aug, 2024 | Download | |
| 2270 | IS/ISO 6683 : 2005/ISO 6683:2005 |
Earth-Moving Machinery - Seat Belts and Seat Belt Anchorages - Performance Requirements and Tests | 0 | ---- | Buy | |
| 2271 | IS 6687 : 2002 (1 Revision) |
Code of practice for selection, storage, installation and maintenance of conveyor belting (First Revision) | 0 | Mar, 2023 | Download | |
| 2272 | IS 6688 : 2005/ISO 2339:1986 (1 Revision) |
Taper pins, unhardened (Second Revision) | 0 | Feb, 2021 | Buy | |
| 2273 | IS 6689 : 2003/ISO 8734:1997 (1 Revision) |
Parallel pins of hardened steel and martensitic stainless steel (Dowel Pins) (First Revision) | 0 | Apr, 2024 | Buy | |
| 2274 | IS 6702 : 1991 (1 Revision) |
Morse taper reduction sleeves specification (first revision) | 2 | Nov, 2018 | Download | |
| 2275 | IS 6708 : 1977 (1 Revision) |
Specification for centre drills type A (first revision) | 0 | Aug, 2024 | Download | |
| 2276 | IS 6709 : 1977 (1 Revision) |
Specification for center drills type B (first revision) | 0 | Aug, 2024 | Download | |
| 2277 | IS 6710 : 1977 (1 Revision) |
Specification for centre drills type R (first revision) | 1 | Aug, 2024 | Download | |
| 2278 | IS 6730 : 1972 |
Specification for felt nails | 0 | Feb, 2021 | Download | |
| 2279 | IS 6733 : 1972 |
Specification for wall and roofing nails | 1 | Feb, 2021 | Download | |
| 2280 | IS 6734 : 1972 |
Specification for cut lath and lath nails | 0 | Feb, 2021 | Download | |
| 2281 | IS 6735 : 1994 (1 Revision) |
Fasteners - Spring lock wasixers for screws with cylindrical heads - Specification (First Revision) | 1 | Feb, 2025 | Download | |
| 2282 | IS 6736 : 1972 |
Specification for slotted raised countersunk head wood screws | 2 | Feb, 2021 | Download | |
| 2283 | IS 6738 : 1972 |
Specification for panel pins and lost head nails | 1 | Feb, 2021 | Download | |
| 2284 | IS 6739 : 1972 |
Slotted Round Head Wood Screws | 2 | Feb, 2021 | Download | |
| 2285 | IS/ISO 6747 : 2013/ISO 6747 : 2013 |
Earth - Moving machinery, tractor - Dozers, terminology and commercial specification | 0 | Jan, 2023 | Buy | |
| 2286 | IS/ISO 6750 : Part 1 : 2019/ISO 6750-1:2019 |
Earth-Moving Machinery - Operator's manual Part 1 Contents and Format (first revision) | 0 | Sep, 2023 | Buy | |
| 2287 | IS 6755 : 1980 (1 Revision) |
Specification for double coil helical spring washers (First Revision) | 0 | Feb, 2021 | Download | |
| 2288 | IS 6760 : 1972 |
Specification for slotted countersunk head wood screws | 2 | Feb, 2021 | Download | |
| 2289 | IS 6776 : 1980 (1 Revision) |
Specification for knurling wheels (first revision) | 1 | Aug, 2024 | Download | |
| 2290 | IS 6805 : 1973 |
Specification for assmann psychrometer | 1 | Feb, 2019 | Download | |
| 2291 | IS 6806 : 1973 |
Specification for snowgauge | 1 | Feb, 2019 | Download | |
| 2292 | IS 6821 : 1973 |
Methods for sampllNg non - Threaded fasteners | 2 | Feb, 2021 | Download | |
| 2293 | IS 6832 : 1985 (1 Revision) |
Specification for fixing screws and fixing washers for buckets for bucket elevators (First Revision) | 0 | Aug, 2020 | Download | |
| 2294 | IS 6833 : 1973 |
Specification for buckets for bucket elevators | 0 | Oct, 2021 | Download | |
| 2295 | IS 6834 : Part 1 : 1973 |
Specification for conveyor chains, chain - Wheels and attachments: Part 1 chains | 1 | Jun, 2024 | Download | |
| 2296 | IS 6834 : Part 2 : 1976 |
Specification for conveyor chains, chain - Wheels and attachments: Part 2 chain - Wheels | 0 | Jun, 2024 | Download | |
| 2297 | IS 6834 : Part 3 : 1976 |
Specification for conveyor chains, chain - Wheels and attachments: Part 3 attachments | 0 | Jun, 2024 | Download | |
| 2298 | IS 6835 : 1973 |
Specification for drifts | 0 | Mar, 2021 | Download | |
| 2299 | IS 6836 : 1973 |
Specification for hand snaps and set - Ups for solid rivets | 1 | Mar, 2021 | Download | |
| 2300 | IS 6837 : 1973 |
Specification for three wheel type pipe cutter | 1 | Jan, 2025 | Download | |
| 2301 | IS 6838 : 1973 |
Dimensions for `O' rings and grooves for vacuum flanges | 0 | Jul, 2020 | Download | |
| 2302 | IS 6841 : 1973 |
Specification for wrecking bars | 0 | Mar, 2021 | Download | |
| 2303 | IS 6843 : 1984 (1 Revision) |
Technical Supply Condition For Pipe Cutters (First Revision) | 0 | Mar, 2021 | Download | |
| 2304 | IS 6844 : 1984 (1 Revision) |
Specification - For wood and leather marking punches (First Revision) | 1 | Mar, 2021 | Download | |
| 2305 | IS 6845 : 1973 |
Specification for wire basket for screening ballast | 0 | Mar, 2021 | Download | |
| 2306 | IS 6849 : Part 1 : 1999/ISO 1607-1:1989 (2 Revision) |
Positive displacement vacuum pumps - Measurement of performance characteristics: Part 1 measurement of volume rate of flow (Pumping Speed) (Second Revision) | 0 | Jul, 2020 | Buy | |
| 2307 | IS 6849 : Part 2 : 1993/ISO 1607-2:1989 (1 Revision) |
Positive displacement vacuum pumps - Measurement of performance characteristics: Part 2 measurement of ultimate pressure (First Revision) | 0 | Sep, 2018 | Buy | |
| 2308 | IS 6849 : Part 3 : 1976/ISO 1607-3:1989 |
Methods of measurement of performance characteristics of positive - Displacement vacuum pumps: Part 3 water vapour pumping capacity | 0 | Sep, 2018 | Buy | |
| 2309 | IS 6860 : 1973 |
Specification for pin punches | 1 | Mar, 2021 | Download | |
| 2310 | IS 6861 : 1973 |
Specification for engineers scrapers | 0 | Mar, 2021 | Download | |
| 2311 | IS 6862 : 2005/ISO 2340 : 1986 (2 Revision) |
Clews pins without head (Second Revision) | 0 | Feb, 2021 | Buy | |
| 2312 | IS 6863 : 2005/ISO 2341:1986 (2 Revision) |
Clevis pins with head (Second Revision) | 0 | Feb, 2021 | Buy | |
| 2313 | IS 6864 : 1984 (1 Revision) |
Specification for metal marking punches (First Revision) | 0 | Mar, 2021 | Download | |
| 2314 | IS 6871 : 1992 (1 Revision) |
Wind equipment - Distant indicating - Specification (First Revision) | 1 | Feb, 2019 | Download | |
| 2315 | IS 6881 : 1973 |
Specification for link type pipe cutters | 0 | Mar, 2021 | Download | |
| 2316 | IS 6883 : 1973 |
Specification for ballast screen | 0 | Mar, 2021 | Download | |
| 2317 | IS 6891 : 1973 |
Carpenters' Auger Bits | 1 | Mar, 2021 | Download | |
| 2318 | IS 6892 : 1973 |
Specification for Blacksmiths bick iron | 0 | Mar, 2021 | Download | |
| 2319 | IS 6901 : 2018/ISO 2503:2009 (3 Revision) |
Gas welding equipment - Pressure regulators and pressure regulators with flow - Metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPA) (Third Revision) | 0 | Sep, 2023 | Buy | |
| 2320 | IS 6916 : 1973 |
Code of practice for fabrication welding of steel castings | 0 | Jan, 2019 | Download | |
| 2321 | IS 6930 : 1973 |
Dimensions for fixing arrangements of buckets for bucket elevators | 0 | Oct, 2021 | Download | |
| 2322 | IS 6952 : 1990 (1 Revision) |
Engineering metrology - Cylindrical squares - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 2323 | IS 6973 : 1973 |
Specification for precision angle plates | 0 | Jan, 2020 | Download | |
| 2324 | IS 6985 : 1973 |
Specification for precision box angle plates | 0 | Jan, 2020 | Download | |
| 2325 | IS 6987 : 1973 |
Specification for steel precision polygons | 0 | Jan, 2020 | Download | |
| 2326 | IS 7009 : 1973 |
Specification for optical square (For Surveying) | 0 | Feb, 2025 | Download | |
| 2327 | IS 7010 : 1973 |
Specification for pivots for magnetic compasses | 1 | Mar, 2021 | Download | |
| 2328 | IS 7011 : 1973 |
Specification for back - Silvered mirrors used in insturment industry | 2 | Mar, 2021 | Download | |
| 2329 | IS 7014 : 1973 |
Specification for length bars | 1 | Jan, 2020 | Download | |
| 2330 | IS 7018 : Part 1 : 1983 (1 Revision) |
Technical supply conditions for gauges: part 1 general (First Revision) | 0 | Feb, 2019 | Download | |
| 2331 | IS 7018 : Part 2 : 1983 (1 Revision) |
Technical supply conditions for gauges: Part 2 assembly and identification of plain plug gauges (Size Range From 1 Mm Up To And Including 250 Mm) (First Revision) | 0 | Feb, 2019 | Download | |
| 2332 | IS 7018 : Part 3 : 1983 (1 Revision) |
Technical supply conditions for gauges: Part 3 assembly and identification of screw plug gauges for ISO metric screw threads (Size Range Form M1 Upto And Including M200) (First Revision) | 1 | Feb, 2019 | Download | |
| 2333 | IS 7020 : 1973 |
Crystals and dielectric materials used in instrument industry | 0 | Mar, 2021 | Download | |
| 2334 | IS 703 : 1999 (2 Revision) |
Axes - Specification (Second Revision) | 2 | Mar, 2021 | Download | |
| 2335 | IS 704 : 1984 (2 Revision) |
Specification for crow - Bars and claw - Bars (Second Revision) | 2 | Mar, 2021 | Download | |
| 2336 | IS 7040 : 1973 |
Specification for Smiths anvil cutters | 0 | Mar, 2021 | Download | |
| 2337 | IS 7041 : 1973 |
Specification for carpenters plain brace | 1 | Mar, 2021 | Download | |
| 2338 | IS 7042 : 1973 |
Carpenters' Ratchet Brace | 2 | Mar, 2021 | Download | |
| 2339 | IS 7047 : 1973 |
Timbers used in instrument industry | 0 | Mar, 2021 | Download | |
| 2340 | IS 7054 : 1973 |
Specification for casing for bucket elevators | 0 | Oct, 2021 | Download | |
| 2341 | IS 7062 : 1973 |
Glossary of Terms Used in Gas Industry | 0 | Aug, 2022 | Download | |
| 2342 | IS 7077 : 1973 |
Specification for bending bars | 0 | Mar, 2021 | Download | |
| 2343 | IS 7078 : 1973 |
Plastics used in instrument industry | 0 | Mar, 2021 | Download | |
| 2344 | IS 708 : 1987 (2 Revision) |
Specification for potassium chlorate for explosive and pyrotechnic industry (Second Revision) | 1 | Apr, 2021 | Download | |
| 2345 | IS/ISO 7096 : 2020/7096:2020 (1 Revision) |
Earth-Moving Machinery — Laboratory Evaluation of Operator Seat Vibration ( First Revision ) | 0 | Jan, 2025 | Buy | |
| 2346 | IS 7124 : 1973 |
Specification for gun powder | 1 | Nov, 2023 | Download | |
| 2347 | IS 7125 : 1974 |
Technical supply conditions for carpenters' braces | 0 | Apr, 2025 | Download | |
| 2348 | IS 7130 : 1994 (2 Revision) |
Chlorosulphontc acid,technical - Specification | 0 | Jan, 2021 | Download | |
| 2349 | IS/ISO 7130 : 2013 : 2013/N/A |
Earth-Moving Machinery - Operator Training - Content and Methods | 0 | Mar, 2022 | Buy | |
| 2350 | IS/ISO 7131 : 2009/ISO 7131 : 2009 (1 Revision) |
Earth - Moving machinery - Loaders - Terminology and commercial specifications (First Revision) | 0 | Mar, 2022 | Buy | |
| 2351 | IS/ISO 7133 : 2013/ISO 7133 : 2013 (1 Revision) |
Earth - Moving machinery - Scrapers - Terminology and commercial specifications (First Revision) | 0 | Mar, 2022 | Buy | |
| 2352 | IS/ISO 7134 : 2013/ISO 7134 : 2013 (1 Revision) |
Earth - Moving machinery - Graders - Terminology and commercial - Specifications (First Revision) | 0 | Mar, 2022 | Buy | |
| 2353 | IS/ISO 7135 : 2009/ISO 7135 : 2009 |
Earth - Moving machinery - Hydraulic excavators - Terminology and commercial specifications | 0 | Jan, 2025 | Buy | |
| 2354 | IS 7142 : 1995 (1 Revision) |
Welded low carbon steel cylinders for low pressure liquifiable gases not exceeding 5 litre water capacity - Specification (First Revision) | 1 | Dec, 2024 | Download | |
| 2355 | IS 715 : 2002 (4 Revision) |
Coated Abrasives | 1 | Sep, 2024 | Download | |
| 2356 | IS 7167 : 1974 |
Code for selection and use of bucket elevators | 0 | Oct, 2021 | Download | |
| 2357 | IS 7177 : 1974 (1 Revision) |
Specification for centre punches | 0 | Mar, 2021 | Download | |
| 2358 | IS 7192 : 2022/ ISO 19085-8 : 2017 (1 Revision) |
Citrus Fruits - Guide for Storage (First Revision) | 0 | ---- | Buy | |
| 2359 | IS 7202 : 2017 (1 Revision) |
Inspection gauges for checking type 4 (Size 1, 2, 3) taper threads of gas cylinder valves and cylinder necks - Specification (First Revision) | 0 | Oct, 2022 | Download | |
| 2360 | IS 7206 : Part 1 : 1986 (1 Revision) |
General requirements for direct circulation rotary drilling rigs: Part 1 with rotary table (First Revision) | 1 | Jan, 2022 | Download | |
| 2361 | IS 7209 : 1974 |
General requirements for blast hole drilling rigs | 0 | Jan, 2022 | Download | |
| 2362 | IS 7214 : 1974/ISO 1174 |
Specification for driving squares for hand socket wrenches | 1 | Jan, 2025 | Buy | |
| 2363 | IS 7222 : 1974 |
Specification for engineers ratchet braces | 0 | Jan, 2025 | Download | |
| 2364 | IS 7228 : 1983/ISO 7006 : 1981 (1 Revision) |
Recommended spindle diam - Eters for woodworking machines with rotating bored tools (First Revision) | 0 | Jan, 2019 | Buy | |
| 2365 | IS/ISO 7240 : Part 10 : 2012/ISO 15848 -1 : 2015 |
Fire Detection and Alarm Systems Part 10 Point-Type Flame Detectors | 0 | ---- | Buy | |
| 2366 | IS 7243 : 1974 |
Specification for sunshine recorder | 0 | Jun, 2023 | Download | |
| 2367 | IS 7244 : 1974 |
Specification for thermometer for mercury barometer | 0 | Jun, 2023 | Download | |
| 2368 | IS 7249 : 1993/ISO 7568 : 1986 (1 Revision) |
Woodworking machines - Thickness planing machines with rotary cutterblock of one - Side dressing - Nomenclature and acceptance conditions (First Revision) | 0 | Jan, 2019 | Buy | |
| 2369 | IS 725 : 1961 |
Specification for copper wire nails (Revised) | 0 | Feb, 2021 | Download | |
| 2370 | IS 7258 : 1990/ISO 7009 : 1983 (1 Revision) |
Woodworking machines - Shingle spindle moulding machines - Nomenclature and acceptance conditions (First Revision) | 0 | Jan, 2019 | Buy | |
| 2371 | IS 7262 : 1996 (1 Revision) |
Turning mandrels - Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 2372 | IS 7265 : 1973 |
Coating materials (Metals, Alloys And Dielectrics) used in optical instrument industry | 0 | Mar, 2022 | Download | |
| 2373 | IS 7266 : 1991/ISO 7946 (1 Revision) |
Test chart for woodworking slot mortising machines (First Revision) | 0 | Jan, 2019 | Buy | |
| 2374 | IS 7267 : 1991/ISO 7571 : 1985 (1 Revision) |
Test chart for woodworking surface planing machines with cutterblock for one - Side dressing (First Revision) | 0 | Jan, 2019 | Buy | |
| 2375 | IS 7273 : 1974 |
Methods of testing fusion welded joints in aluminium and aluminium alloys | 0 | Jan, 2019 | Download | |
| 2376 | IS 7278 : 1993 (1 Revision) |
Methyl Chloride - Specification (First Revision) | 1 | Feb, 2021 | Download | |
| 2377 | IS 7279 : 1992/ISO 7945-1 : 1985 (1 Revision) |
Test chart for woodwork - ing single spindle boring machines (First Revision) | 0 | Jan, 2019 | Buy | |
| 2378 | IS 7285 : Part 1 : 2018 (4 Revision) |
Refillable seamless steel gas cylinders - Specification: Part 1 normalized steel cylinders (Fourth Revision) | 2 | Oct, 2022 | Download | |
| 2379 | IS 7285 : Part 2 : 2017 (4 Revision) |
Refillable seamless steel gas cylinders - Specification: Part 2 quenched and tempered steel cylinders with tensile strength less than 1 100 mpa (112 Kgf/mm²) (Fourth Revision) | 1 | Oct, 2022 | Download | |
| 2380 | IS 7286 : 1991/ISO 7950 (1 Revision) |
Test chart for woodworking single chain mortising machines (First Revision) | 0 | Jan, 2019 | Buy | |
| 2381 | IS 7289 : 1992/ISO 7569 (1 Revision) |
Test chart for woodworking planing machines for two, three or four - Side dressing (First Revision) | 0 | Jan, 2019 | Buy | |
| 2382 | IS 7294 : 1990 (1 Revision) |
Woodworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and acceptance conditions First Revision | 0 | Jan, 2019 | Download | |
| 2383 | IS 7296 : 1992/ISO 7570 (1 Revision) |
Test chart for woodworking surface planing and thicknessing machines (First Revision) | 0 | Jan, 2019 | Buy | |
| 2384 | IS 7301 : 1974 |
Specification for grinding mandrels | 2 | Mar, 2021 | Download | |
| 2385 | IS 7302 : 2018 (1 Revision) |
Valve fittings for self contained breathing apparatus (SCBA) and self contained underwater breathing apparatus (SCUBA) - Specification (First Revision) | 1 | Oct, 2022 | Download | |
| 2386 | IS 7303 : 1974 |
Specification for covered electrodes for surfacing of metal by manual metal arc welding | 0 | Feb, 2024 | Download | |
| 2387 | IS 7307 : Part 1 : 1974 |
Approval tests for welding procedures: Part 1 fusion welding of steel | 0 | Jan, 2019 | Download | |
| 2388 | IS 7310 : Part 1 : 2019/ISO 9606-1 : 2012 (1 Revision) |
Qualification Testing of Welders - Fusion Welding Part 1 Steels (First Revision) | 0 | Sep, 2023 | Buy | |
| 2389 | IS 7310 : Part 2 : 2019/ ISO 9606-2 : 2004 |
Qualification Test of Welders - Fusion Welding Part 2 Aluminium and Aluminium Alloys ( First Revision ) | 0 | Sep, 2023 | Buy | |
| 2390 | IS 7310 : Part 3 : 2019/ ISO 9606-3 : 1999 |
Approval Testing of Welders - Fusion Welding Part 3 Copper and Copper Alloys ( First Revision ) | 0 | Sep, 2023 | Buy | |
| 2391 | IS 7310 : Part 4 : 2019/ ISO 9606-4 : 1999 |
Approval Testing of Welders - Fusion Welding Part 4 Nickel and Nickel Alloys ( First Revision ) | 0 | Sep, 2023 | Buy | |
| 2392 | IS 7310 : Part 5 : 2019/ ISO 9606-5 : 2000 |
Approval Testing of Welders - Fusion Welding Part 5 Titanium and Titanium Alloys, Zirconium and Zirconium Alloys (First Revision) | 0 | Sep, 2023 | Buy | |
| 2393 | IS 7312 : 2018 (3 Revision) |
Welded and seamless steel dissolved acetylene gas cylinders - Specification (Third Revision) | 1 | Mar, 2024 | Download | |
| 2394 | IS 7318 : Part 1 : 1974 |
Approval test for welders when welding procedure approval is not required: Part 1 fusion welding of steel | 0 | Sep, 2023 | Download | |
| 2395 | IS 7318 : Part 2 : 1974 |
Approval tests for welders when welding procedure approval is not required: Part 2 tig or mig welding of aluminium and its alloys | 0 | Sep, 2023 | Download | |
| 2396 | IS 7327 : 2003/ISO 8512-2 : 1990 (2 Revision) |
Engineering metrology - Measuring equipment - Granite surface plates - Specification (Second Revision) | 0 | Aug, 2023 | Buy | |
| 2397 | IS 7368 : 2005/ISO 8744:1997 (2 Revision) |
Grooved pins - Full - Length taper grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 2398 | IS 7381 : 1986/ISO 7381 (1 Revision) |
Specification for hand operated square drive socket wrenches (First Revision) | 0 | Aug, 2024 | Buy | |
| 2399 | IS 7383 : 2005/ISO 8742:1997 (2 Revision) |
Grooved puns - One - Third - Length centre grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 2400 | IS 7384 : 2005/ISO 8739:1997 (2 Revision) |
Grooved pins - Full - Length parallel grooved, with pilot (Second Revision) | 0 | Feb, 2021 | Buy | |
| 2401 | IS 7385 : 2005/ISO 8745:1997 (2 Revision) |
Grooved pins - Half - Length taper grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 2402 | IS 7386 : 2005/ISO 8741:1997 (2 Revision) |
Grooved pins - Half - Length reverse taper grooved (Second Revision) | 0 | Feb, 2021 | Buy | |
| 2403 | IS/ISO 7388 : Part 1 : 2007/ISO 7388-1 : 2007 |
Tool Shanks with 7/24 taper for automatic tool changers: Part 1 Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF | 0 | Jun, 2023 | Buy | |
| 2404 | IS/ISO 7388 : Part 2 : 2007/ISO 7388 : Part 2 : 2007 |
Tool shanks with 7/24 taper for automatic tool changers: Part 2 Dimensions and designation of shanks of forms J, JD and JF | 0 | Jun, 2023 | Buy | |
| 2405 | IS/ISO 7388 : Part 3 : 2007/ISO 7388-3 : 2007 |
Tool shanks with 7/24 taper for automatic tool changers: Part 3 Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF | 0 | Nov, 2018 | Buy | |
| 2406 | IS 7401 : 1987 (1 Revision) |
Specification for paraffin wax for explosive and pyrotechnic industry (First Revision) | 1 | Sep, 2023 | Download | |
| 2407 | IS 7403 : 1974 |
Code of practice for selection of standard worm and helical gear boxes | 0 | Mar, 2023 | Download | |
| 2408 | IS/ISO 7425 : PART 2 : 1989/ISO 7425-2:1989 (1 Revision) |
Hydraulic fluid power - Housings for elastomer - Energized, plastic - Faced seals - Dimensions and tolerances: Part 2 rod seal housings | 0 | Jan, 2020 | Buy | |
| 2409 | IS 7439 : 1974 |
Dimensions for aeroslides | 0 | Dec, 2024 | Download | |
| 2410 | IS 7443 : 2002 (1 Revision) |
Method for load rating of worm gears (First Revision) | 0 | Mar, 2023 | Download | |
| 2411 | IS 7445 : 2022/ISO 6947:2019 (1 Revision) |
Acetone Code of Safety (First Revision) | 0 | ---- | Buy | |
| 2412 | IS 7446 : 1987 (1 Revision) |
Dimensions for chisel shanks and chuck bushings for pneumatic chippers (First Revision) | 0 | Jun, 2021 | Download | |
| 2413 | IS/ISO 7451 : 2007/ISO 7451 : 2007 |
Earth - Moving machinery - Volumetric ratings for hoe - Type and grab - Type buckets of hydraulic excavators and backhoe loaders | 0 | Mar, 2023 | Buy | |
| 2414 | IS 7456 : 1994 (1 Revision) |
Rock drill shanks and chuck bushings - Dimensions (First Revision) | 0 | Feb, 2018 | Download | |
| 2415 | IS/ISO 7457 : 1997/ISO 7457 : 1997 |
Earth - Moving machinery - Determination of turning dimensions of wheeled machines | 0 | Mar, 2022 | Buy | |
| 2416 | IS 746 : 2021/ISO 14405-1:2016 (2 Revision) |
Textiles Handloom cotton blankets grey or coloured Specification | 0 | ---- | Buy | |
| 2417 | IS 7465 : 1974 |
Specification for portable and mobile troughed belt conveyors | 0 | Jan, 2020 | Download | |
| 2418 | IS 7468 : 1974 |
Recommendation on preferred strokes for mechanical and hydraulic presses | 1 | Mar, 2021 | Download | |
| 2419 | IS 7469 : 1974 |
Recommendation on preferred capacities for mechanical and hydraulic presses | 0 | Aug, 2024 | Download | |
| 2420 | IS 7478 : 2011/ISO 4757 : 1983 (2 Revision) |
Cross recesses for screws (Second Revision) | 0 | Feb, 2021 | Buy | |
| 2421 | IS 7504 : 1995 (1 Revision) |
Gears - Cylindrical gears - Accuracies methods of inspection (First Revision) | 0 | Feb, 2021 | Download | |
| 2422 | IS/ISO 7507 : 2011/ISO 7507-2 : 2005 |
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 2 Optical-Reference-Line Method | 0 | ---- | Buy | |
| 2423 | IS/ISO 7507 : Part 1 : 2003/ISO 7507(Part 1):200 |
Petroleum and liquid petroleum products - Calibration of vertical cylindrical tanks: Part 1 strapping method | 0 | Dec, 2022 | Buy | |
| 2424 | IS/ISO 7507 : Part 3 : 2006/ISO 7507-3 : 2006 |
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 3 Optical-Triangulation Method | 0 | ---- | Buy | |
| 2425 | IS/ISO 7507 : Part 4 : 2010/ISO 7507-4:2010 |
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 4 Internal Electro-Optical Distance-Ranging Method | 0 | ---- | Buy | |
| 2426 | IS/ISO 7507 : Part 5 : 2000/ISO 7507-5:2000 |
Petroleum and Liquid Petroleum Products — Calibration of Vertical Cylindrical Tanks Part 5 External Electro-Optical Distance-Ranging Method | 0 | ---- | Buy | |
| 2427 | IS 7513 : Part 1 : 2019/ISO 1219-1:2012 |
Fluid Power Systems and Components ― Graphical Symbols and Circuit Diagrams Part 1 Graphical Symbols for Conventional Use and Data-Processing Applications ( First Revision ) | 0 | Aug, 2023 | Buy | |
| 2428 | IS 7513 : Part 2 : 2019/ISO 1219-2:2012 (1 Revision) |
Fluid power systems and components ? graphical symbols and circuit diagrams: Part 2 circuit diagrams (First Revision) | 0 | Aug, 2023 | Buy | |
| 2429 | IS 7519 : 1974 |
Specification for hammer drive screws | 1 | Feb, 2021 | Download | |
| 2430 | IS 7526 : 1996 (2 Revision) |
Detonating fuses - Specification (Second Revision) | 0 | Mar, 2019 | Download | |
| 2431 | IS 7543 : 1975 |
Specification for planimeters | 0 | Mar, 2019 | Download | |
| 2432 | IS 7544 : 1975 |
Specification For Parallel Ruler ( Roller Type ) | 0 | Mar, 2019 | Download | |
| 2433 | IS 7545 : 1975 |
Specification for optical bench (Advanced Type) | 0 | Jan, 2025 | Download | |
| 2434 | IS 7577 : 2020 (2 Revision) |
Gas Testing Flame Safety Lamps — Specification ( Second Revision ) | 0 | Aug, 2024 | Download | |
| 2435 | IS 7587 : Part 1 : 2020 (2 Revision) |
Cage Suspension Gear for Winding in Mines Part 1 General Requirements ( Second Revision ) | 0 | Aug, 2024 | Download | |
| 2436 | IS 7587 : Part 2 : 2006 (1 Revision) |
Cage suspension gear for winding in mines - Specification: Part 2 cappels (First Revision) | 1 | Feb, 2022 | Download | |
| 2437 | IS 7587 : Part 3 : 2006 (1 Revision) |
Cage suspension gear for winding in mines - Specification: Part 3 shackles and pins (First Revision) | 1 | Feb, 2022 | Download | |
| 2438 | IS 7587 : Part 4 : 2006 (1 Revision) |
Cage suspension gear for winding in mines - Specification: Part 4 bridle chains (First Revision) | 0 | Feb, 2022 | Download | |
| 2439 | IS 7587 : Part 5 : 2006 (1 Revision) |
Cage suspension gear for winding in mines - Specification: Part 5 distribution plates (First Revision) | 2 | Feb, 2022 | Download | |
| 2440 | IS 7587 : Part 6 : 2006 (1 Revision) |
Cage suspension gear for winding in mines - Specification: Part 6 safety detaching hooks (4 Plates Type) 80 and 100 kN capacity (First Revision) | 0 | Feb, 2022 | Download | |
| 2441 | IS 7587 : Part 7 : 2017 (1 Revision) |
Cage suspension gear for winding in mines - Specification: Part 7 safety detaching hook (4 Plate Type) 120, 150 and 200 kN capacity (First Revision) | 0 | Sep, 2022 | Download | |
| 2442 | IS 7587 : Part 8 : 1993 |
Winding in mines - Suspension gear: Part 8 clivey hook suspension arrangements | 0 | Nov, 2018 | Download | |
| 2443 | IS 7588 : 1992 (1 Revision) |
Barytes for explosives and pyrotechnic compositions - Specification (First Revision) | 0 | Apr, 2021 | Download | |
| 2444 | IS 7589 : 1974 |
Specification for china clay for explosive and pyrotechnic industry | 0 | Apr, 2021 | Download | |
| 2445 | IS 7599 : Part 1 : 1975 |
General requirements for engineer's comparators with stands:Part I engineer's comparators | 0 | Mar, 2022 | Download | |
| 2446 | IS 7599 : Part 2 : 1975 |
General Requirements for Engineer's Comparators With Stand - Part II : Comparator Standard | 0 | Mar, 2022 | Download | |
| 2447 | IS 7602 : 1975 |
Specification for lead chromate for explosive and pyrotechnic compositions | 0 | Apr, 2021 | Download | |
| 2448 | IS 7604 : 1975 |
Specification for length bar accessories | 0 | Mar, 2022 | Download | |
| 2449 | IS 7605 : 1986 (1 Revision) |
Specification for portable pneumatic chippers (First Revision) | 0 | Jan, 2021 | Download | |
| 2450 | IS 7606 : 1982 (1 Revision) |
Specification for plain adjustable snap gauges (First Revision) | 0 | Mar, 2022 | Download | |
| 2451 | IS 7615 : 2003 (2 Revision) |
System of cone tolerance for conical workpiece from c = 1:3 to 1:500 and lengths from 6 to 630 mm (Second Revision) | 0 | Apr, 2024 | Download | |
| 2452 | IS/ISO 7626 : Part 5 : 2019/7626-5:2019 (1 Revision) |
Mechanical Vibration and Shock — Experimental Determination of Mechanical Mobility Part 5 Measurements Using Impact Excitation with an Exciter Which is Not Attached to The Structure ( First Revision ) | 0 | Apr, 2019 | Buy | |
| 2453 | IS 7632 : 1975 |
Specification for detonators | 0 | Apr, 2021 | Download | |
| 2454 | IS 7633 : 1982 (1 Revision) |
Specification for calcium carbonate for explosive and pyrotechnic industry (First Revision) | 1 | Apr, 2021 | Download | |
| 2455 | IS 7649 : 1975 |
Glossary of terms used in connection with aerial ropeways and cableways | 0 | Feb, 2023 | Download | |
| 2456 | IS 7653 : 1975 |
Specification for manual blow pipes for welding and cutting | 0 | Jan, 2019 | Download | |
| 2457 | IS 7663 : 1975 |
Specification for box spanners for rail screws | 1 | Jan, 2025 | Download | |
| 2458 | IS 7664 : 2005 (1 Revision) |
Guide pillar for press tool die sets - Specification (Second Revision) | 0 | Mar, 2021 | Download | |
| 2459 | IS 7684 : 1975 |
LIMITS OF SIZES FOR ISO METRIC TRAPEZOIDAL NUT THREADS DIAMETER RANGE 8 TO 100 mm | 1 | Feb, 2021 | Download | |
| 2460 | IS 7685 : 1975 |
Limits of sizes for ISO metric trapezoidal bolt threads (Diameter Range 8 To 100 Mm) | 1 | Feb, 2021 | Download | |
| 2461 | IS 7706 : 1975 |
Specification for bolster plates for gap frame presses without die cushion | 0 | Mar, 2021 | Download | |
| 2462 | IS 7707 : 1975 |
Specification for bolster plates for gap frame presses with die cushion | 0 | Mar, 2021 | Download | |
| 2463 | IS 7726 : 1975 |
Limits of sizes for ISO metric trapezoidal nut threads (Diameter Range 105 To 300 Mm) | 1 | Sep, 2024 | Download | |
| 2464 | IS 7727 : 1975 |
Limits of sizes for ISO metric trapezoidal bolt threads (Diameter Range 105 To 300 Mm) | 1 | Sep, 2024 | Download | |
| 2465 | IS 7738 : 1975 |
Specification for safety fuse for commercial use | 0 | Apr, 2021 | Download | |
| 2466 | IS 774 : 2021/ISO 17450-1:2011 (6 Revision) |
Ceramic (Vitreous China) flushing cisterns for water closets and urinals - Specification (sixth revision) | 0 | ---- | Buy | |
| 2467 | IS 7744 : 1975 |
Dimensions for drip - Feed lubricators | 0 | Sep, 2024 | Download | |
| 2468 | IS 7766 : 1975 |
Specification for twist drills for jig boring machines | 2 | Aug, 2024 | Download | |
| 2469 | IS 7772 : 1975 |
Specification for shell core drills | 1 | Aug, 2024 | Download | |
| 2470 | IS 7773 : 1975 |
Holding dimensions for broaching tools | 0 | Aug, 2024 | Download | |
| 2471 | IS 7778 : Part 1 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 1 Twist drills, countersink and counterbores (first revision) | 0 | Aug, 2024 | Download | |
| 2472 | IS 7778 : Part 2 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 2 Reamers (first revision) | 0 | Aug, 2024 | Download | |
| 2473 | IS 7778 : Part 3 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 3 Sleeves, sockets and adaptors (first revision) | 0 | Aug, 2024 | Download | |
| 2474 | IS 7778 : Part 4 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 4 Screwing taps, dies and knurling tools (first revision) | 0 | Aug, 2024 | Download | |
| 2475 | IS 7778 : Part 5 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 5 Milling cutters (first revision) | 0 | Aug, 2024 | Download | |
| 2476 | IS 7778 : Part 6 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 6 Milling arbors and accessories (first revision) | 0 | Aug, 2024 | Download | |
| 2477 | IS 7778 : Part 7 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 7 Gear cutting tools and broaches (first revision) | 0 | Aug, 2024 | Download | |
| 2478 | IS 7778 : Part 8 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 8 Saws (first revision) | 0 | Aug, 2024 | Download | |
| 2479 | IS 7778 : Part 9 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 9 Single point (HSS And Carbide Tipped) tools (first revision) | 0 | Aug, 2024 | Download | |
| 2480 | IS 7778 : Part 10 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 10 Carbide tips and indexable inserts (first revision) | 0 | Aug, 2024 | Download | |
| 2481 | IS 7778 : Part 11 : 2003 (1 Revision) |
Small tools sampling inspection procedures: Part 11 Hard metal burrs (first revision) | 0 | Aug, 2024 | Download | |
| 2482 | IS 7794 : 1984 (1 Revision) |
Specification for manual portable grease guns | 0 | Mar, 2018 | Download | |
| 2483 | IS 7795 : 2004 (1 Revision) |
Hexagon nuts with collar - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 2484 | IS 7800 : 1990 (1 Revision) |
Thread cutting tapping screwsscrew threads and ends - Dimensions (First Revision) | 0 | Feb, 2021 | Download | |
| 2485 | IS 7822 : 2005/ISO 3291:2016 (2 Revision) |
Twist drills -- Extra-long morse taper shank -- Specification (second revision) | 0 | Jan, 2021 | Buy | |
| 2486 | IS 7823 : 2005/ISO 3292:2016 (2 Revision) |
Twist drills -- Extra-long parallel shank -- Specification (second revision) | 0 | Jan, 2021 | Buy | |
| 2487 | IS 7824 : 1995 (1 Revision) |
Quick change drill chucks, collets and floating reamer holders Specification (First Revision) | 0 | Mar, 2022 | Download | |
| 2488 | IS 7847 : 1975 |
General characteristics of lifting hooks | 0 | Oct, 2020 | Download | |
| 2489 | IS 7859 : 1975 |
Gauge allowances and manufacturing tolerances for plain gauges for inside measurements for ISO fit sizes (Nominal Size Up To 500 mm) | 0 | Jan, 2020 | Download | |
| 2490 | IS B786 : 1967 (1 Revision) |
Guide for inter - Conversion of values from one system of units to another | 1 | Mar, 2022 | Download | |
| 2491 | IS B786 (Supplement) : 1967 (1 Revision) |
Conversion factors and conversion tables (First Revision) | 0 | Mar, 2022 | Download | |
| 2492 | IS 7865 : 1975 |
General requirements of & tonne hooks for lifting ISO series 1 freight containers of up to 30 tonnes capacity | 0 | Jan, 2025 | Download | |
| 2493 | IS 7868 : 1975 |
Specification for rotary drill rods for drilling principally in coal | 0 | Jun, 2021 | Download | |
| 2494 | IS 787 : 1956 |
Guide for inter - Conversion of values from one system of units to another | 0 | Mar, 2022 | Download | |
| 2495 | IS 7876 : 1975 |
Gauge allowances and manufacturing tolerances for plain gauges for outside measurements for ISO fit sizes (Nominal Size Up To 500 mm) | 0 | Jan, 2020 | Download | |
| 2496 | IS 7886 : 1997 (1 Revision) |
Barium chromate for explosives and pyrotechnic industry - Specification (First Revision) | 0 | Nov, 2023 | Download | |
| 2497 | IS 7913 : 2014/ISO 721 : 1991 (1 Revision) |
Rock drilling equipment - Integral stems (First Revision) | 0 | Feb, 2019 | Buy | |
| 2498 | IS 7919 : 1975 |
Specification for refractometer - abbe type | 0 | Apr, 2025 | Download | |
| 2499 | IS/ISO 7919 : Part 3 : 2009/ISO 7919 : Part 3 : 2009 |
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts: Part 3 coupled industrial machines | 0 | Sep, 2022 | Buy | |
| 2500 | IS 7923 : 1985 (1 Revision) |
Glossary of terms and definitions relating to drives using V - Belts and grooved pulleys (First Revision) | 0 | Feb, 2021 | Download | |
| 2501 | IS 7939 : 1976 |
Specification for flare nut wrench, double ended, flat | 0 | Jan, 2025 | Download | |
| 2502 | IS 7958 : 1976 |
Specification for hand vices | 0 | Jan, 2025 | Download | |
| 2503 | IS 7974 : Part 1 : 1976/ISO 710-1:1974 |
Graphical symbols for use on detailed maps, plans and geological cross sections: Part 1 general rules of representation | 0 | May, 2023 | Buy | |
| 2504 | IS 7974 : Part 2 : 1977/ISO 710-2:1974 |
Graphical symbols for use on detailed maps, plans and geological cross sections: Part 2 representation of sedimentary rocks | 0 | May, 2023 | Buy | |
| 2505 | IS 7974 : Part 3 : 1976/ISO 710-3:1974 |
Graphical symbols for use on detailed maps, plans and geological cross sections: Part 3 Representation of magnetic rocks | 0 | May, 2023 | Buy | |
| 2506 | IS 7975 : Part 1 : 1976 |
Specification for driving parts for hand - Operated square drive socket wrenches: Part 1 technical supply conditions | 0 | Apr, 2025 | Download | |
| 2507 | IS 7975 : Part 2 : 2018 (2 Revision) |
Assembly tools for screws and nuts - Driving parts for hand - Operated square drive socket wrenches: Part 2 dimensions and tests (Second Revision) | 0 | Aug, 2024 | Download | |
| 2508 | IS 7978 : 1984 (1 Revision) |
Specification for portable pneumatic rivet cutters (First Revision) | 1 | Jan, 2021 | Download | |
| 2509 | IS 7979 : 1984 (1 Revision) |
Specification for portable pneumatic rivetting hammers (First Revision) | 0 | Jan, 2021 | Download | |
| 2510 | IS 7989 : 1976 |
Specification for pliers for internal circlips | 0 | Apr, 2025 | Download | |
| 2511 | IS 7990 : 1976 |
Specification for pliers for external circlips | 0 | Apr, 2025 | Download | |
| 2512 | IS 7991 : 2016/ISO 3316 : 2012 (2 Revision) |
Attachment for hand operated square drive socket wrenches - Specification (Second Revision) | 0 | Mar, 2021 | Buy | |
| 2513 | IS 7993 : 1988 (1 Revision) |
Specification for power operated square drive socket wrenches (Impact) (First Revision) | 0 | Jan, 2025 | Download | |
| 2514 | IS 7995 : 1994 (1 Revision) |
Pneumatic concrete breaker shanks - Dimensions (First Revision) | 0 | Sep, 2024 | Download | |
| 2515 | IS 7996 : 1976 |
Specification for driving squares for power socket wrenches | 2 | Apr, 2025 | Download | |
| 2516 | SP 8 : 1970 |
Mathematical physical, chemical and engineering tables | 1 | Mar, 2022 | Download | |
| 2517 | IS 8000 : Part 1 : 2019/ISO 1101:2017 (2 Revision) |
Geometrical product specifications (GPS) -- Geometrical tolerancing: Part 1 Tolerances of form, orientation, location and run-out (Second Revision) | 0 | Aug, 2023 | Buy | |
| 2518 | IS 8000 : Part 4 : 1976 |
Tolerances of form and of position for engineering drawings: Part 4 Practical examples of indications on drawings | 1 | Mar, 2022 | Download | |
| 2519 | IS/IEC 80000-13 : 2008/IEC 80000-13 : 2008 |
Quantities and units: Part 13 information science and technology | 0 | Aug, 2024 | Buy | |
| 2520 | IS 8002 : 1976 |
Recommended procedure for welding of flexible pvc (Flexible Polyvinyl Chloride) | 0 | Jan, 2019 | Download | |
| 2521 | IS 8003 : 2008 (1 Revision) |
Wheel axle assemblies for mine cars - Specification (First Revision) | 0 | Nov, 2023 | Download | |
| 2522 | IS 8004 : 1976 |
Recommended procedure welding of rigid PVC for (Rigid Polyvinyl Chloride) | 0 | Jan, 2019 | Download | |
| 2523 | IS 8017 : 1988 (1 Revision) |
Specification for vitreous enamelled reflectors for use with illuminating device | 1 | Mar, 2025 | Download | |
| 2524 | IS 8023 : 1991 (1 Revision) |
Gauges - Single ended progressive type plate snap gauges (Up to 160 mm) - Specification (First Revision) | 0 | Jan, 2020 | Download | |
| 2525 | IS/ISO 8041 : Part 1 : 2017/8041-1:2017 |
Human Response to Vibration Measuring Instrumentation Part 1 General Purpose Vibration Meters ( First Revision ) | 0 | ---- | Buy | |
| 2526 | IS/ISO 8042 : 1988/ISO 8042 : 1988 (2 Revision) |
Shock and vibration measurements - Characteristics to be specified for seismic pick - Ups | 0 | Feb, 2021 | Buy | |
| 2527 | IS 8063 : 1976 |
Specification for red lead for explosive and pyrotechnic industry | 1 | Apr, 2021 | Download | |
| 2528 | IS 8064 : 2002 (2 Revision) |
Method of designation of mechanical and hydraulic presses (Second Revision) | 0 | Aug, 2024 | Download | |
| 2529 | IS 8066 : 1976 |
Specification for mine cars | 1 | Sep, 2020 | Download | |
| 2530 | IS 8068 : 1976 |
Specification for tab washers | 1 | Feb, 2021 | Download | |
| 2531 | IS 807 : 2006 (2 Revision) |
Design, erection and testing (Structural Portion) of cranes and hoists - Code of practice (Second Revision) | 2 | Oct, 2020 | Download | |
| 2532 | IS 8070 : 1991 (1 Revision) |
Screws - Slotted capstan (Tommy bolts) - Specification (First Revision) | 0 | Feb, 2021 | Download | |
| 2533 | IS 8107 : 1993/ISO 7948 : 1987 (1 Revision) |
Woodworking machines - Routing machines - Nomenclature and acceptance conditions (First Revision) | 0 | Jan, 2019 | Buy | |
| 2534 | IS 8127 : 2005 (2 Revision) |
Guide bushes for press tool die sets - Specification (Second Revision) | 0 | Mar, 2021 | Download | |
| 2535 | IS 813 : Part 2 : 2018/ISO 4063:2009 |
Welding and allied processes: Part 2 nomenclature of processes and reference numbers (Second Revision) | 0 | Jan, 2023 | Buy | |
| 2536 | IS 814 : 2004 (6 Revision) |
Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision) | 3 | Mar, 2021 | Download | |
| 2537 | IS 816 : 1969 (1 Revision) |
Code of practice for use of metal arc welding for general construction in mild steel (First Revision) | 1 | Jan, 2019 | Download | |
| 2538 | IS 8165 : 2010/ISO 5734 : 1986 |
Acceptance conditions of mechanical dividing heads for machine tools - Testing of accuracy (First Revision) | 0 | May, 2023 | Buy | |
| 2539 | IS 8166 : 1988 (1 Revision) |
Specification for rotary drill bits for drilling principally in coal (First Revision) | 0 | Nov, 2018 | Download | |
| 2540 | IS 817 : 1966 |
Code of practice for training and testing of metal arc welders (Revised) | 0 | Jan, 2019 | Download | |
| 2541 | IS 817 : Part 1 : 1992 (2 Revision) |
Training of welders - Code of practice: Part 1 manual metal arc welding (Second Revision) | 0 | Jan, 2019 | Download | |
| 2542 | IS 817 : Part 2 : 1996 (2 Revision) |
Training of welders - Code of practice: Part 2 oxyfuel welding (Second Revision) | 0 | Jan, 2019 | Download | |
| 2543 | IS 8177 : 1976 |
Specification for pin vices | 0 | Jan, 2025 | Download | |
| 2544 | IS 818 : 1968 (1 Revision) |
Code of practice for safety and health requirements in electric and gas welding and cutting operations (First Revision) | 0 | Jan, 2019 | Download | |
| 2545 | IS 8189 : 2023/ISO 10110-5:2015 (2 Revision) |
SPECIFICATION FOR RUBBER HOSE AND HOSE ASSEMBLIES FOR OIL SUCTION AND DISCHARGE SERVICE | 0 | ---- | Buy | |
| 2546 | IS 819 : 1957 |
Code of practice for resistance spot welding for light assemblies in mild steel | 1 | Jan, 2019 | Download | |
| 2547 | IS 8198 : 2004 |
Steel cylinders for compressed gases (Atmospheric gases, hydrogen, high pressure liquefiable gases and dissolved acetylene gases) - Code of practice | 0 | Mar, 2024 | Download | |
| 2548 | IS 8198 : Part 5 : 2022/ISO 19085-9 : 2019 (2 Revision) |
CODE OF PRACTICE FOR STEEL CYLINDERS FOR COMPRESSED GASES PART 5: LIQUEFIED PETROLEUM GAS LPG | 0 | ---- | Buy | |
| 2549 | IS 8198 : Part 6 : 1988 (1 Revision) |
Code of practice for steel cylinders for compressed gases Part 6 Liquefied chlorine gas | 0 | Oct, 2022 | Download | |
| 2550 | IS 8202 : 1999 (1 Revision) |
Carpenter's Wooden Bodies Planes | 0 | Mar, 2021 | Download | |
| 2551 | IS 8208 : 2020/ISO 3320 : 2013 (2 Revision) |
Fluid Power Systems and Components — Cylinder Bores and Piston Rod Diameters and Area Ratios — Metric Series ( Second Revision ) | 0 | Dec, 2024 | Buy | |
| 2552 | IS 8217 : 1976 |
Dimensions of pipe thread runouts and undercuts | 0 | Feb, 2021 | Download | |
| 2553 | IS 822 : 1970 |
Code of procedure for inspection of welds | 0 | Jan, 2019 | Download | |
| 2554 | IS 8243 : Part 1 : 1999/ISO 1608-1:1993 (2 Revision) |
Vapour vacuum pumps - Measurement of performance characteristics: Part 1 measurement of volume rate of flow (Pumping Speed) (Second Revision) | 0 | Sep, 2021 | Buy | |
| 2555 | IS 8243 : Part 2 : 1993/ISO 1608-2:1993 (1 Revision) |
Vapour vacuum pumps - Measurement of performance characteristics: Part 2 measurement of critical backing pressure (First Revision) | 0 | Sep, 2021 | Buy | |
| 2556 | IS 8248 : 1976 |
Specification for antireflection coating on glass optical components | 0 | Mar, 2022 | Download | |
| 2557 | IS 8251 : 1976 |
Specification for commercial cooking ranges including grillers for use with liquefied petroleum gases | 0 | Sep, 2020 | Download | |
| 2558 | IS 8262 : Part 2 : 1976 |
Specification for qusck - Release couplings for vacuum pipelines: Part 2 clamped type | 0 | Sep, 2021 | Download | |
| 2559 | IS 8275 : 1976 |
Specification for binocular eyepication for microscope | 1 | Mar, 2019 | Download | |
| 2560 | IS 8276 : Part 1 : 1976 |
Methods for calibration of vaccum gauges: Part 1 pressure reduction by continuous flow in the pressure range of 10 - 1 to 10 - 5 pa | 0 | Sep, 2018 | Download | |
| 2561 | IS 828 : Part 1 : 2023/ISO 10110-11:2016 (3 Revision) |
Cricket Bats - Specification Part 1 for Leather Ball use | 0 | ---- | Buy | |
| 2562 | IS 8288 : 1976 |
Specification for bakeable flanges | 0 | Sep, 2021 | Download | |
| 2563 | IS 8305 : 1976 |
Specification for twist drills, morse taper shank, long series | 1 | Aug, 2024 | Download | |
| 2564 | IS 8306 : 1976 |
Specification for carbide tipped twist drills, morse taper shank | 1 | Aug, 2024 | Download | |
| 2565 | IS 8307 : 1976 |
Specification for carbide tipped, twist drills, parallel shank | 1 | Aug, 2024 | Download | |
| 2566 | IS 8311 : 1976 |
Specification for instrument jewels | 1 | Mar, 2019 | Download | |
| 2567 | IS 8324 : 1988 (1 Revision) |
Code of practice for safe use and maintenance on non - Calibrated round steel link lifting chains and chain slings ( First Revision) | 1 | Apr, 2024 | Download | |
| 2568 | IS 8330 : 2004 (2 Revision) |
Tripods for surveying instruments - Fixed leg type - Specification (Second Revision) | 0 | Mar, 2019 | Download | |
| 2569 | IS 8336 : 1977 |
Specification for thermoelectric pyranometer | 4 | Mar, 2025 | Download | |
| 2570 | IS 8351 : 1977 |
Specification for spiral pins (Heavy Duty Type) | 0 | Feb, 2021 | Download | |
| 2571 | IS 8352 : 1977 |
Specification for flat countersunk square neck bolts | 0 | Feb, 2021 | Download | |
| 2572 | IS 8353 : 1977 |
Specification for flat countersunk nib bolts | 0 | Feb, 2021 | Download | |
| 2573 | IS 8363 : 1976 |
Specification for bare wire electrodes for electroslag welding of steels | 1 | Jan, 2019 | Download | |
| 2574 | IS 8379 : 1977 |
Specification for spiral pins (Medium - Duty Type) | 0 | Feb, 2021 | Download | |
| 2575 | IS 8384 : 2013/ISO 2941 : 2009 (1 Revision) |
Hydraulic fluid power - Filter elements - Verification of collapse/burst pressure rating (First Revision) | 0 | Dec, 2024 | Buy | |
| 2576 | IS 8385 : 2005/ISO 2943:1998 (1 Revision) |
Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids (First Revision) | 0 | Dec, 2024 | Buy | |
| 2577 | IS 8386 : 1977 |
Method of test for end - Load rating of oil hydraulic filter elements | 1 | Dec, 2024 | Download | |
| 2578 | IS 8390 : 1977 |
Specification for are combs | 0 | Mar, 2019 | Download | |
| 2579 | IS 8405 : 2005 |
Thread rolling cylindrical dies -- Specification (first revision) | 0 | Aug, 2024 | Download | |
| 2580 | IS 8407 : 2010 (1 Revision) |
Acceptance conditions for gear hobbing machines - Testing of the accuracy (First Revision) | 0 | May, 2023 | Download | |
| 2581 | IS 841 : 1983 (2 Revision) |
Specification for steel hammers (Second Revision) | 3 | Mar, 2021 | Download | |
| 2582 | IS 8417 : 1977 |
Glossary of lubrication terms | 0 | Mar, 2018 | Download | |
| 2583 | IS 842 : 1968 (1 Revision) |
Smith's Swages | 2 | Apr, 2025 | Download | |
| 2584 | IS 8421 : 1977 |
Specification for hydraulic props | 0 | Sep, 2020 | Download | |
| 2585 | IS 843 : 1968 (1 Revision) |
SPECIFICATION FOR SMITH’S TONGS (First Revision) | 0 | Apr, 2025 | Download | |
| 2586 | IS 8433 : 2017 (2 Revision) |
Periodic inspection and maintenance of dissolved acetylene gas cylinders - Code of practice (Second Revision) | 0 | Nov, 2021 | Download | |
| 2587 | IS 844 : Part 1 : 1979 (2 Revision) |
Specification for screwdrivers: Part 1 techincal supply conditions (Second Revisionn) | 0 | Mar, 2021 | Download | |
| 2588 | IS 844 : Part 2 : 1979 (2 Revision) |
Specification for screwdrivers: Part 2 dimensions (Second Revision) | 0 | Mar, 2021 | Download | |
| 2589 | IS 844 : Part 3 : 1979 (2 Revision) |
Specification for screw drivers: Part 3 dimensions for screw drivers for recessed head screws (Second Revision) | 1 | Mar, 2021 | Download | |
| 2590 | IS 845 : 1974 (1 Revision) |
Specification for swage blocks and stands (Firsf Revision) | 0 | Jan, 2025 | Download | |
| 2591 | IS 8451 : 2018 (3 Revision) |
Periodic inspection and testing of seamless steel gas cylinders - Code of practice (Third Revision) | 0 | Jan, 2024 | Download | |
| 2592 | IS 8452 : 1977 |
Glossary of terms used in acetylene generators | 0 | Nov, 2021 | Download | |
| 2593 | IS 8455 : 1977 |
Recommended procedure for welding of polyethylene | 1 | Jan, 2019 | Download | |
| 2594 | IS 846 : 1968 (1 Revision) |
Specification for Smith flatters (First Revision) | 0 | Mar, 2021 | Download | |
| 2595 | IS 847 : 1968 (1 Revision) |
Specification for Smith Fullers (First Revision) | 0 | Mar, 2021 | Download | |
| 2596 | IS 8471 : 2003 (1 Revision) |
Acetylene generators - Requirements (First Revision) | 1 | Mar, 2024 | Download | |
| 2597 | IS 8473 : 1988 (1 Revision) |
Specification for roof bars used in mines | 0 | Nov, 2018 | Download | |
| 2598 | IS 8484 : 1998 (1 Revision) |
Metal powders for welding electrodes - Specification (First Revision) | 0 | Mar, 2021 | Download | |
| 2599 | IS 8486 : 1977 |
Code of practice for maintenance of tungsten carbide tipped integral stems | 0 | Jan, 2021 | Download | |
| 2600 | IS 8487 : 2023/ISO/TR 22100-1:2021 (1 Revision) |
PHOSALONE EMULSIFIABLE CONCENTRATES SPECIFICATION | 0 | ---- | Buy | |
| 2601 | IS 8494 : 2023/ISO 19014-4:2020 (1 Revision) |
MCPA TECHNICAL SPECIFICATION | 0 | ---- | Buy | |
| 2602 | IS/ISO 8525 : 2008/ISO 8525:2008 |
Airborne noise emitted by machine tools - Operating conditions for metal - Cutting machines | 0 | ---- | Buy | |
| 2603 | IS 8526 : 1994 (1 Revision) |
Sizes for bores and port threads for pneumatic fluid power cylinders - Recommendations (First Revision) | 0 | Dec, 2024 | Download | |
| 2604 | IS 8531 : 1986 (1 Revision) |
Specification for pulleys for belt conveyors (First Revision) | 0 | Feb, 2023 | Download | |
| 2605 | IS 8532 : 2013 (2 Revision) |
Hydraulic fluid power - Filter elements - Determination of resistance to flow fatigue using particulate contaminant (Second Revision) | 0 | Dec, 2024 | Download | |
| 2606 | IS/ISO 8573 : PART 1 : 2010/ISO 8573-1 : 2010 (1 Revision) |
Compressed Air: Part 1 Contaminants and Purity Classes (First Revision) | 0 | Mar, 2022 | Buy | |
| 2607 | IS/ISO 8573 : Part 2 : 2018/ISO 8573-2 : 2018 (1 Revision) |
Compressed Air - Contaminant Measurement Part 2 Oil Aerosol Content (First Revision) | 0 | Sep, 2024 | Buy | |
| 2608 | IS/ISO 8573 : Part 3 : 1999/ISO 8573-3 : 1999 |
Compressed Air: Part 3 Test Methods for Measurement of Humidity | 0 | Jun, 2020 | Buy | |
| 2609 | IS/ISO 8573 : Part 4 : 2019/ISO 10987 (1 Revision) |
Compressed Air Contaminant Measurement Part 4 Particle Content | 0 | Mar, 2024 | Buy | |
| 2610 | IS/ISO 8573 : Part 5 : 2001/ISO 8573-5: 2001 |
Compressed Air: Part 5 Test Methods for Oil Vapour And Organic Solvent Content | 0 | Jun, 2020 | Buy | |
| 2611 | IS/ISO 8573-6 : 2003/ISO 8573-6: 2003 |
Compressed Air: Part 6 Test Methods for Gaseous Contaminant Content | 0 | Jun, 2020 | Buy | |
| 2612 | IS/ISO 8573-7 : 2003/ISO 8573-7:2003 |
Compressed Air: Part 7 Test Method for Viable Microbiological Contaminant Content | 0 | Jun, 2020 | Buy | |
| 2613 | IS/ISO 8573 : Part 8 : 2004/ISO 8573-8: 2004 |
Compressed Air: Part 8 Test Methods for Solid Particle Content by Mass Concentration | 0 | Jun, 2020 | Buy | |
| 2614 | IS/ISO 8573 : Part 9 : 2004/ISO 8573-9:2004 |
Compressed Air: Part 9 Test Methods for Liquid Water Content | 0 | Jun, 2020 | Buy | |
| 2615 | IS 8593 : Part 1 : 2017 (1 Revision) |
Recommendations for centralised lubrication as applied to plant and machinery: Part 1 oil lubrication (First Revision) | 0 | ---- | Download | |
| 2616 | IS 8593 : Part 2 : 2017 (1 Revision) |
Recommendations for centralized lubrication as applied to plant and machinery: Part 2 grease lubrication (First Revision) | 0 | Sep, 2024 | Download | |
| 2617 | IS 8593 : Part 3 : 1984 |
Recommendations for centralized lubrication as applied to plant and machinery: Part 3 aerosol lubrication | 0 | Sep, 2024 | Download | |
| 2618 | IS 8596 : 1977 |
Recommended parameters of stationary steam boilers | 0 | Feb, 2022 | Download | |
| 2619 | IS 8597 : 1977 |
Specification for flat belt conveyors | 0 | Aug, 2020 | Download | |
| 2620 | IS 8598 : 2019 (2 Revision) |
Idler and Idler Sets for Belt Conveyor — Specification ( Second Revision ) | 0 | ---- | Download | |
| 2621 | IS 8599 : 1977 |
Recommendations for selection of apron conveyors | 0 | Aug, 2020 | Download | |
| 2622 | IS/ISO 8608 : 2016/ISO 8608 : 2016 |
Mechanical vibration - Road surface profiles - Reporting of measured data | 0 | Feb, 2021 | Buy | |
| 2623 | IS 8614 : Part 1 : 2013/ISO 839-1 : 2006 (2 Revision) |
Milling machine arbors with 7/24 tapers: Part 1 Dimensions and designation (second revision) | 0 | Jun, 2023 | Buy | |
| 2624 | IS 8615 : 1993 (1 Revision) |
Stub milling arbors with self-release 7/24 taper -- Specification (first revision) | 1 | Aug, 2024 | Download | |
| 2625 | IS 8616 : 1993 (1 Revision) |
Stub milling arbors with self-release 7/24 taper and with key -- Specification (first revision) | 0 | Aug, 2024 | Download | |
| 2626 | IS 8618 : 1977 |
Specification for spacing collars for milling arbors | 1 | Aug, 2024 | Download | |
| 2627 | IS 8619 : 1977 |
Specification for bearing collars for milling arbors | 1 | Aug, 2024 | Download | |
| 2628 | IS 8620 : 1993 (1 Revision) |
Clamping nuts for milling arbors specification (first revision) | 0 | Jun, 2023 | Download | |
| 2629 | IS 8621 : 1977 |
Specification for retaining screw for milling arbors | 1 | Aug, 2024 | Download | |
| 2630 | IS 8622 : 1999 (1 Revision) |
Wire wound sliding contact rheostats for use in educational institutions - Specification (First Revision) | 0 | Mar, 2019 | Download | |
| 2631 | IS/ISO 8626 : 1989/ISO 8626 : 1989 (1 Revision) |
Servo - Hydraulic test equipment for generating vibration method of describing characteristics | 1 | Jan, 2022 | Buy | |
| 2632 | IS 8630 : 1977 |
Specification For Engineers Drawing Instruments, Double Line Pens | 1 | Mar, 2021 | Download | |
| 2633 | IS/ISO 8636 : PART 1 : 2000/ISO 8636-1:1987 (1 Revision) |
Machine tools - Test conditions for bridge - Type milling machines - Testing of the accuracy: Part 1 fixed bridge (Portal - Type) machines (First Revision) | 0 | May, 2023 | Buy | |
| 2634 | IS/ISO 8636 : Part 2 : 2007/ISO 8636-2 : 2007 |
Machine Tools — Test Conditions for Bridge-Type Milling Machines — Testing of the Accuracy Part 2 Travelling Bridge (Gantry-Type) Machines | 0 | ---- | Buy | |
| 2635 | IS/ISO 8643 : 2017/ISO 8643:2017 (1 Revision) |
Earth - Moving machinery - Hydraulic excavator and backhoe loader boom lowering control device - Requirements and tests (First Revision) | 0 | ---- | Buy | |
| 2636 | IS 8646 : 1994 (1 Revision) |
Conveyors - Scrapper (Flight) - General requirements (First Revision) | 0 | Dec, 2024 | Download | |
| 2637 | IS 8651 : 1977 |
Specification for flame photometer | 0 | Apr, 2025 | Download | |
| 2638 | IS 866 : 1957 |
Specification forTinmens Rivets | 0 | Feb, 2021 | Download | |
| 2639 | IS 8661 : 1977 |
Specification for polarimeter and saccharimeter (Optical) | 0 | Apr, 2025 | Download | |
| 2640 | IS 8666 : 1977 |
Specification for copper and copper alloy covered electrodes for manual metal arc welding | 0 | Jan, 2024 | Download | |
| 2641 | IS 8668 : 1984/ISO 2352 : 1982 (1 Revision) |
Dimensions for spiral ratchet screw driver shanks (First Revision) | 0 | Mar, 2021 | Buy | |
| 2642 | IS 8669 : 2014/ISO 1173 : 2001 (2 Revision) |
Assembly tools for screws and nuts - Drive ends for hand - And machine - Operated screwdriver bits and connecting parts - Dimensions, torque testing (Second Revision) | 0 | Jan, 2025 | Buy | |
| 2643 | IS 8670 : 1977 |
Specification for screwdrivers for hexagon insert bits | 0 | Apr, 2025 | Download | |
| 2644 | IS 8671 : 1977 |
Specification for nail puller | 0 | Apr, 2025 | Download | |
| 2645 | IS 8672 : 1989 (1 Revision) |
Pliers - Flat nose without cutter, short - Specification (First Revision) | 0 | Jan, 2025 | Download | |
| 2646 | IS 8673 : 1977 |
Specification for Farrier | 0 | Jan, 2025 | Download | |
| 2647 | IS 8679 : 1978 |
Specification for triangular scales | 0 | Mar, 2021 | Download | |
| 2648 | IS 8680 : 1978 |
Specification For Engineers Drawing Instruments, Compass, Bow Pen, Double Knee Jointed with Sector Head Joints | 0 | Mar, 2021 | Download | |
| 2649 | IS 8681 : 1978 |
Specification For Engineers Drawing - Instruments, Compass, Bow Pencil, Double Knee Jointed with Sector Head Joints | 0 | Mar, 2021 | Download | |
| 2650 | IS/ISO 8686 : PART 1 : 2012/iso 8686-1 (1 Revision) |
Cranes - Design principles for loads and load combinations: Part 1 general (First Revision) | 0 | Jan, 2025 | Buy | |
| 2651 | IS/ISO 8686 : Part 4 : 2005/ISO 8686-4:2004 |
Cranes - Design principles for loads and load combinations: Part 4 jib cranes | 0 | Jan, 2025 | Buy | |
| 2652 | IS 8691 : 1986 (1 Revision) |
Specification for mirror stereoscope (First Revision) | 0 | Mar, 2021 | Download | |
| 2653 | IS 8692 : Part 1 : 2004/ISO 3338-1 : 1996 (1 Revision) |
Cylindrical shanks for milling cutters: Part 1 Dimensional characteristics of plain cylindrical shanks (first revision) | 0 | Jan, 2021 | Buy | |
| 2654 | IS 8692 : Part 3 : 2007/ISO 3338-3 : 1996 |
Cylindrical shanks for milling cutters: Part 3 Dimensional characteristics of threaded shanks | 0 | Jun, 2023 | Buy | |
| 2655 | IS 8710 : 1978 |
Specification for electromagnetic chucks | 1 | Mar, 2022 | Download | |
| 2656 | IS 8711 : 2002 (1 Revision) |
Gap frame open front mechanical presses - Capacity ratings and dimensions (First Revision) | 0 | Aug, 2024 | Download | |
| 2657 | IS 8721 : 1978 |
Specification for fish bolts (Cup Oval Neck Bolts) for collieries | 0 | Feb, 2021 | Download | |
| 2658 | IS 8722 : 1978 |
Specification for fish bolts with square head | 0 | Feb, 2021 | Download | |
| 2659 | IS 8723 : 1978 |
Dimensions for vibrating conveyors and feeders with rectangular or trapezoidal trough | 0 | Feb, 2023 | Download | |
| 2660 | IS 8732 : 2003/ISO 2490 : 1996 (1 Revision) |
Single -- Start solid (Monobloc) gear nobs with tenon drive or axial keyway, 1 to 40 module -- Nominal dimensions (first revision) | 0 | Nov, 2018 | Buy | |
| 2661 | IS 8733 : 1978 |
Tolerances for single start gear hobs | 0 | Mar, 2023 | Download | |
| 2662 | IS 8736 : 1977 |
Specification for nickel and nickel alloy covered electrodes for metal arc welding | 0 | Jan, 2024 | Download | |
| 2663 | IS 8737 : 2017 (2 Revision) |
Valve Fittings for Use with Liquefied Petroleum Gas (LPG) of upto 250 litre Water Capacity - Specification (Second Revision) | 2 | Oct, 2022 | Download | |
| 2664 | IS 8754 : 1992 (1 Revision) |
Electrical anemograph - Specification (First Revision) | 1 | Feb, 2019 | Download | |
| 2665 | IS 8775 : 1978 |
Filling pressure and corresponding developed pressure for permanent gases contained in cylinders | 0 | Oct, 2022 | Download | |
| 2666 | IS 8777 : 2008/ISO 3410 (1 Revision) |
Agricultural machinery - Endless variable - Speed V - Belts and groove sections of corresponding pulleys (First Revision) | 0 | Feb, 2021 | Buy | |
| 2667 | IS 8788 : 2002 (2 Revision) |
Dimensions for metric external taper and internal parallel screw threads september 2002 (Second Revision) | 0 | Sep, 2024 | Download | |
| 2668 | IS 8801 : 1978 |
Specification for male stud coupling body for oil - Hydraulic couplings | 3 | Sep, 2024 | Download | |
| 2669 | IS 8802 : 1987 (1 Revision) |
Specification for ferrules for oil hydraulic couplings (First Revision) | 2 | Sep, 2024 | Download | |
| 2670 | IS 8803 : 1987 (1 Revision) |
Specification for coupling nuts for oil hydraulic system (First Revision) | 1 | Sep, 2024 | Download | |
| 2671 | IS 8805 : 2002 (1 Revision) |
General requirements for ferrule type couplings used in oil hydraulic systems (First Revision) | 0 | Sep, 2024 | Download | |
| 2672 | IS/ISO 8811 : 2000/ISO 8811:2000 |
Earth - Moving machinery - Rollers and compactors - Terminology and commercial specification | 0 | ---- | Buy | |
| 2673 | IS 8823 : 1978 |
Specification for triangular straightedges | 0 | Jan, 2020 | Download | |
| 2674 | IS 8830 : 2007/ISO 9083 (1 Revision) |
Calculation of load capacity of spur and hellcal gears - Application to marine gears (First Revision) | 0 | Mar, 2023 | Buy | |
| 2675 | IS 8841 : 1978 |
Recommendations for limits and flTs for sizes above 3 i50 mm up to io 000 mm | 0 | Apr, 2024 | Download | |
| 2676 | IS 8842 : 1978 |
Specification for high speed steel butt - Welded single point planing tools | 1 | Aug, 2024 | Download | |
| 2677 | IS 8843 : 1978 |
Accuracy requirements for turbine gears | 0 | Oct, 2024 | Download | |
| 2678 | IS 8856 : 1991 (1 Revision) |
Hexagon weld nuts - Specification (First Revision) | 1 | Nov, 2024 | Download | |
| 2679 | IS 8869 : 1978 |
Specification for washers for corrugated sheet roofing | 0 | Feb, 2021 | Download | |
| 2680 | IS 8914 : 2022/ISO 6847:2020 (2 Revision) |
Quality Tolerances for Water for Vitreous Enamel Industry (Second Revision ) | 0 | ---- | Buy | |
| 2681 | IS 8916 : 1978 |
Specification for spherometbr | 0 | Oct, 2022 | Download | |
| 2682 | IS 8918 : 1978 |
Dimensions for spindle noses for adjustable adaptors | 0 | Aug, 2024 | Download | |
| 2683 | IS 8919 : 2007/ISO 2905 : 1985 (1 Revision) |
Modular units for machine tool construction -- Spindle noses and adjustable adaptors for multi spindle heads (first revision) | 0 | Sep, 2017 | Buy | |
| 2684 | IS 8931 : 2021/ISO 20140 - 3 : 2019 (2 Revision) |
Copper alloy single taps, combination tap assemblies, stop valves and single lever mixers for water services — Specification (second revision) | 0 | ---- | Buy | |
| 2685 | IS 8964 : 1999 (1 Revision) |
Safety conditions for woodworking machines - Recommendations (First Revision) | 0 | Jan, 2019 | Download | |
| 2686 | IS 8976 : 1978 |
Guide for preparation and arrangement of sets of drawings and parts lists | 0 | Mar, 2023 | Download | |
| 2687 | IS 8987 : 1978 |
Recommended practices for air carbon arc gauging and cutting | 1 | Jan, 2019 | Download | |
| 2688 | IS 8999 : 2003/ISO 7-2 : 2000 (1 Revision) |
Pipe threads where pressure - Tight joints are made on the threads - Verification by means of limit gauges (First Revision) | 0 | Aug, 2023 | Buy | |
| 2689 | SP 9 : 1973 |
Technical data sheet for gases conveyed in cylinders | 2 | Mar, 2020 | Download | |
| 2690 | IS 9006 : 1978 |
Recommended practice for welding of clad steels | 0 | Jan, 2019 | Download | |
| 2691 | IS 9011 : 1978 |
Specification for skip suspension gear for winding in mines | 1 | Sep, 2020 | Download | |
| 2692 | IS 9026 : 2004 (1 Revision) |
Rope threaded percussive long - Hole drilling equipments - Specification (First Revision) | 0 | Aug, 2020 | Download | |
| 2693 | IS 9063 : 1986 (1 Revision) |
Specification for hook spanners (First Revision) | 0 | Jan, 2025 | Download | |
| 2694 | IS 9064 : 1979 |
Specification for copper hammers | 0 | Mar, 2021 | Download | |
| 2695 | IS 9065 : 1979 |
Specification for aluminium hammers | 1 | Mar, 2021 | Download | |
| 2696 | IS 9068 : 2021/ISO 6481 : 2019 (1 Revision) |
Textiles - Quantitative chemical analysis - General principles of testing (First Revision) | 0 | ---- | Buy | |
| 2697 | IS 9085 : 1979 |
Specification for correction slide for mercury barometers | 1 | Jun, 2022 | Download | |
| 2698 | IS 9094 : Part 1 : 1979 |
Specification for drill chuck taper arbors: Part 1 having taper shanks | 0 | Mar, 2022 | Download | |
| 2699 | IS 9107 : 1979 |
Specification for autocollimator | 2 | Mar, 2019 | Download | |
| 2700 | IS 9123 : 1979 |
Specification for battery locom - Otives for use in mines | 0 | Sep, 2020 | Download | |
| 2701 | IS 9170 : Part 1 : 2005 (1 Revision) |
Endless haulage rope clips - Specification: Part 1 general requirements (First Revision) | 0 | Sep, 2020 | Download | |
| 2702 | IS 9170 : Part 2 : 2005 |
Endless haulage rope clips - Specification: Part 2 screw clip, cam clip, smallman clip and wedge clip | 0 | Sep, 2020 | Download | |
| 2703 | IS 9170 : Part 3 : 2005 |
Endless haulage rope clips - Specification: Part 3 lashing chain | 0 | Sep, 2020 | Download | |
| 2704 | IS 9171 : 1979 |
Code of practice for maintenance and use of friction and hydraulic props and link bars | 0 | Sep, 2020 | Download | |
| 2705 | IS/ISO 9176 : 1988/ISO 9176 : 1988 |
Tubular technical pens - Adaptor for compasses | 0 | Mar, 2021 | Buy | |
| 2706 | IS/ISO 9179 : PART 1 : 1988/ISO 9179 : PART 1 : 1988 |
Technical drawings - Numerically controlled draughting machines | 0 | Mar, 2021 | Buy | |
| 2707 | IS/ISO 9180 : 1998/ISO 9180 : 1998 (1 Revision) |
Black leads for wood - Cased pencils - Classification and diameters | 0 | Mar, 2021 | Buy | |
| 2708 | IS 9181 : 1988 (1 Revision) |
Specification for C - Clamps (First Revision) | 0 | Jan, 2025 | Download | |
| 2709 | IS 919 : Part 1 : 2014/ISO 286-1 : 2010 |
Geometrical Product Specifications (GPS) - ISO Code System for Tolerances on Linear Sizes Part 1 Basis of Tolerance, Deviation and Fits (Third Revision) | 1 | Apr, 2024 | Buy | |
| 2710 | IS 919 : Part 2 : 2014/ISO 286-2 : 2010 (1 Revision) |
Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes: Part 2 tables of standard tolerance classes and limit deviation for holes and shafts (Second Revision) | 1 | Apr, 2024 | Buy | |
| 2711 | IS 9193 : 1988 (1 Revision) |
Specification for bearing pullers (First Revision) | 0 | Jan, 2025 | Download | |
| 2712 | IS 9200 : 2021/ISO 18217 : 2015 (2 Revision) |
METHODS OF DISPOSAL OF UNSERVICEABLE COMPRESSED GAS CYLINDERS CODE OF PRACTICE | 0 | ---- | Buy | |
| 2713 | IS 9202 : 2020 (1 Revision) |
Rolling Bearings — Cylindrical Rollers — Specification ( First Revision ) | 0 | Apr, 2025 | Download | |
| 2714 | IS 9228 : 2019 (1 Revision) |
Chairs for chairlifts - Specification (First Revision) | 0 | ---- | Download | |
| 2715 | IS 9234 : Part 3 : 2023/ISO 7755-12:2013 |
Methods of Sampling and Test for Solid Waste Part 3 Chemical Analysis (Excluding Industrial Solid Wastes) (First Revision) | 0 | ---- | Buy | |
| 2716 | IS 9239 : 1999 (1 Revision) |
Winding in mines - Sheaves - Cast - Specification (First Revision) | 1 | Sep, 2020 | Download | |
| 2717 | IS/ISO 9244 : 2008/ISO 9244 : 2008 |
Earth - Moving machinery - Machine safety labels - General principles | 0 | Mar, 2022 | Buy | |
| 2718 | IS 9246 : 2022/ISO 16792 : 2021 (1 Revision) |
Chapati Machine - Specification | 0 | ---- | Buy | |
| 2719 | IS/ISO 9248 : 1992/ISO 9248 : 1992 |
Earth - Moving machinery - Units for dimensions, performance and capacities, and their measurement accuracies | 0 | Mar, 2022 | Buy | |
| 2720 | IS/ISO 9249 : 2007/ ISO 9249 : 2007 |
Earth - Moving machinery - Engine test code - Net power | 0 | Mar, 2023 | Buy | |
| 2721 | IS 9261 : 1979 |
Symbolization of control positions for timekeeping instruments | 0 | Mar, 2024 | Download | |
| 2722 | IS 9263 : Part 1 : 2015/ISO 1112 : 2009 (1 Revision) |
Horology -- Specification: Part 1 Functional and non-functional jewels (First Revision) | 0 | Mar, 2021 | Buy | |
| 2723 | IS 9263 : Part 2 : 1999 (1 Revision) |
Wrist watches -- Jewels: Part 2 Types and dimensions (First Revision) | 0 | Jul, 2019 | Download | |
| 2724 | IS 9266 : Part 1 : 2017 (1 Revision) |
Press working die sets (Boss Type) - Specification: Part 1 centre post rectangular die sets (First Revision) | 0 | Aug, 2024 | Download | |
| 2725 | IS 9266 : Part 2 : 2019 (1 Revision) |
Press working die sets (Boss Type) - Specification: Part 2 centre post square die sets (First Revision) | 0 | ---- | Download | |
| 2726 | IS 9266 : Part 3 : 2019 (1 Revision) |
Press working die sets (Boss Type) - Specification: Part 3 centre post round die sets (First Revision) | 0 | ---- | Download | |
| 2727 | IS 9266 : Part 4 : 1990 |
Press working die sets (Boss Type) - Specieication: Part 4 centre post reverse rectangular die sets | 0 | Apr, 2022 | Download | |
| 2728 | IS 9303 : 2021/ISO 19085-1 : 2017 (1 Revision) |
Guide for cold storage of Table Grapes (First Revision) | 0 | ---- | Buy | |
| 2729 | IS 9316 : Part 8 : 2023/ISO 10110-6:2015 (1 Revision) |
METHODS OF TEST FOR RUBBER LATEX PART 8 DETERMINATION OF TOTAL IRON ISO 1657:1986 IDT | 0 | ---- | Buy | |
| 2730 | IS 9323 : 1991 (1 Revision) |
Carbide tipped end mills with parallel shanks -- specification (first revision) | 1 | Aug, 2024 | Download | |
| 2731 | IS 9324 : 1991 (1 Revision) |
Carbide tipped end mlls with morse taper shanks -- Specification (first revision) | 0 | Aug, 2024 | Download | |
| 2732 | IS 9325 : 1996 (1 Revision) |
Carbide tipped slot drills with parallel shanks -- Specification (first Revision) | 0 | Aug, 2024 | Download | |
| 2733 | IS 9326 : 1996 (1 Revision) |
Carbide tipped slot drills with morse taper and tapped end shanks -- Specification (first revision) | 0 | Aug, 2024 | Download | |
| 2734 | IS 9330 : 1979 |
Terminology for parameters of waste heat boilers and boilers for special purposes | 0 | Feb, 2022 | Download | |
| 2735 | IS 9332 : 1979 |
Recommended parameters of waste heat boilers and boilers for special purposes | 0 | Feb, 2022 | Download | |
| 2736 | IS 9387 : Part 1 : 2018 (1 Revision) |
Specification for taper male stud elbow body for oil - Hydraulic c0upling: Part 1 made from forgings zyxw | 0 | Sep, 2024 | Download | |
| 2737 | IS 9387 : Part 2 : 2018 (1 Revision) |
Specification for taper male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock | 0 | Sep, 2024 | Download | |
| 2738 | IS 9388 : Part 1 : 1979 |
Specification for equal elbow body for oil - Hydraulic couplings: Part 1 made from forgings | 0 | Sep, 2024 | Download | |
| 2739 | IS 9388 : Part 2 : 2019 (1 Revision) |
Equal elbow body for oil - Hydraulic couplings - Specification: Part 2 made from bar stock (First Revision) | 0 | ---- | Download | |
| 2740 | IS 9389 : Part 1 : 2018 (1 Revision) |
Specification for - Equal tee - Body for oil - Hydraulic couplins: Part 1 tee body made from forgings | 0 | Sep, 2024 | Download | |
| 2741 | IS 9389 : Part 2 : 2018 (1 Revision) |
Specification for equal tee body for oil - Hydraulic couplings: Part 2 made from bar stock | 0 | Sep, 2024 | Download | |
| 2742 | IS 9390 : 2018 (1 Revision) |
Specification for straight coupling body for oil - Hydraulic couplings | 0 | Sep, 2024 | Download | |
| 2743 | IS 9391 : 1980 |
Specification for straight coupling assemblies for oil - Hydraulic systems | 0 | Sep, 2024 | Download | |
| 2744 | IS 9392 : 1980 |
Specification for taper male stud coupling body for oil - Hydraulic couplings | 1 | Sep, 2024 | Download | |
| 2745 | IS 9404 : 2002 (1 Revision) |
Identification of pipeline used in thermal power plants - Colour code (First Revision) | 0 | Feb, 2022 | Download | |
| 2746 | IS 9411 : 1980 |
Specification for elbow coupling assemblies for oil - Hydraulic systems | 0 | Sep, 2024 | Download | |
| 2747 | IS 9412 : Part 2 : 1980 |
Specification for male stud elbow body for oil - Hydraulic couplings: Part 2 made from bar stock | 1 | Nov, 2018 | Download | |
| 2748 | IS 9419 : 2017 (2 Revision) |
Pusher legs - Specification (Second Revision) | 0 | Jun, 2021 | Download | |
| 2749 | IS 9440 : 1979 |
Specification for laboratory balances | 0 | Oct, 2022 | Download | |
| 2750 | IS 9441 : 1979 |
Specification for sextant | 0 | Oct, 2022 | Download | |
| 2751 | IS 9474 : 1980 |
Specification for principles of mechanical guarding of machinery | 1 | Jan, 2019 | Download | |
| 2752 | IS 9475 : 1986 (1 Revision) |
Specification for plug and ring gauges for self release 7/24 tapers (First Revision) | 0 | Mar, 2022 | Download | |
| 2753 | IS 9483 : 1993 (1 Revision) |
Measuring instruments - Micrometer heads - Specification (First Revision) | 0 | Jan, 2020 | Download | |
| 2754 | IS 9495 : 1980 |
Test for brazeability of brazing alloys | 0 | Jan, 2019 | Download | |
| 2755 | IS 9507 : 1979 |
Specification for general purpose electric power driven winches for lifting and hauling | 0 | Oct, 2020 | Download | |
| 2756 | IS 9514 : 1980 |
Specification for front surface aluminized mirrors | 0 | Mar, 2021 | Download | |
| 2757 | IS 9515 : 1980 |
Specification for link V - Belts | 0 | Feb, 2021 | Download | |
| 2758 | IS 9520 : 2008 (1 Revision) |
Nominal sizes for valves (First Revision) | 0 | Dec, 2023 | Download | |
| 2759 | IS 9524 : 1980 |
Recommended procedure for repair welding of steel components by aluminothermic process | 1 | Jan, 2019 | Download | |
| 2760 | IS 9529 : 1980 |
Specification for taper plug gauges and taper ring gauges to check taper bore of gauge handles and taper shanks of gauging members | 0 | Mar, 2022 | Download | |
| 2761 | IS/ISO 9533 : 2010/ISO 9533 : 2010 |
Earth - Moving machinery - Machine Mounted audible travel alarms and forward horns - Test methods and performance criteria | 0 | Mar, 2022 | Buy | |
| 2762 | IS 9562 : 1980 |
Specification for non - Metal helmet for police force | 5 | Sep, 2022 | Download | |
| 2763 | IS 9571 : 1980 |
Specification for photoelectric colorimeter (Single Beam) | 0 | Mar, 2021 | Download | |
| 2764 | IS 9595 : 1996 (1 Revision) |
Metal - Arc welding of carbon and carbon manganese steels - Recommendations (Fifth Revision) | 0 | Jan, 2019 | Download | |
| 2765 | IS 9600 : 1980 |
Specification for safety matches in booklet | 0 | Apr, 2021 | Download | |
| 2766 | IS 9607 : 1980 |
Specification for tertiary level | 1 | Mar, 2021 | Download | |
| 2767 | IS 9608 : 1985 (1 Revision) |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size range above M40 up to and Including M120) (First Revision) | 0 | Jan, 2020 | Download | |
| 2768 | IS 9609 : Part 1 : 2006/ISO 3098-2 : 2000 (2 Revision) |
Technical product documentation -- Lettering: Part 1 Latin alphabet, numerals and marks (Second Revision) | 0 | Mar, 2023 | Buy | |
| 2769 | IS 9609 : Part 2 : 2006/ISO 3098-3 : 2000 (1 Revision) |
Technical product documentation -- Lettering: Part 2 Greek alphabet (First Revision) | 0 | Feb, 2021 | Buy | |
| 2770 | IS 9609 : Part 3 : 2006/ISO 3098-4 : 2000 (1 Revision) |
Technical product documentation -- Lettering: Part 3 Diacritical and particular marks for the latin alphabet (First Revision) | 0 | Mar, 2023 | Buy | |
| 2771 | IS 9609 : Part 4 : 2006/ISO 3098-6 : 2000 (1 Revision) |
Technical product documentation -- Lettering: Part 4 Cyrillic alphabet (First Revision) | 0 | Mar, 2023 | Buy | |
| 2772 | IS 9609 : Part 5 : 1998 |
Lettering on technical drawings: Part 5 Amplified devnagri letters | 0 | Feb, 2021 | Download | |
| 2773 | IS 9609 : Part 6 : 2001/ISO 3098-5 : 1997 |
Technical product documentation -- Lettering: Part 6 Cad lettering of the latin alphabet, numerals and marks | 0 | Mar, 2023 | Buy | |
| 2774 | IS 9610 : 1985 (1 Revision) |
Specification for go and no go screw ring gauges for ISO metric screw threads (Size range from M1 up to and including M100) (First Revision) | 0 | Jan, 2020 | Download | |
| 2775 | IS 9613 : 1980 |
Specification for primary level | 0 | Mar, 2021 | Download | |
| 2776 | IS 9619 : 1980 |
Identification code for shell type needle bearings (Including Sealed Bearing) | 0 | Jan, 2023 | Download | |
| 2777 | IS 9631 : 1983 (1 Revision) |
Specification for gauging members for go and no go screw plug gauges and screw check plug gauges for ISO metric screw threads (Size Range From M1 up to and Including M40) (First Revision) | 1 | Feb, 2019 | Download | |
| 2778 | IS 9639 : 2017 (1 Revision) |
Visual inspection of low pressure welded steel gas cylinders during manufacture - Code of practice (First Revision) | 0 | Oct, 2022 | Download | |
| 2779 | IS 9641 : 1980 |
Dimensions for lugs for wrist watch case | 0 | Mar, 2024 | Download | |
| 2780 | IS 9642 : 1980 |
Dimensions for case pipe for wrist watch case | 0 | Mar, 2024 | Download | |
| 2781 | IS 9645 : 2005 (1 Revision) |
Hexagon socket pipe plugs (First Revision) | 0 | Dec, 2024 | Download | |
| 2782 | IS 9672 : 1980 |
Dimensions for movements for wrist watch | 1 | Mar, 2024 | Download | |
| 2783 | IS 9673 : 1980 |
Specification for crown for wrist watch case | 0 | Mar, 2024 | Download | |
| 2784 | IS 9680 : 1980 |
Materials for light duty springs for instrument industry | 0 | Mar, 2019 | Download | |
| 2785 | IS 9695 : 1980 |
Methods for sampling of helmets | 0 | Dec, 2020 | Download | |
| 2786 | IS 9705 : Part 1 : 1980 |
Specification for quick release coupling for vacuum pipe lines: Part 1 screwed couplings type b | 0 | Jul, 2020 | Download | |
| 2787 | IS 9706 : 2019 (2 Revision) |
Material handling ropeways - Code of practice (Second Revision) | 1 | Nov, 2023 | Download | |
| 2788 | IS 9707 : 1994 (1 Revision) |
Pneumatic screw drivers and nut runners(Non - Impact type) - Specification (First Revision) | 0 | Mar, 2023 | Download | |
| 2789 | IS 9722 : 1981/ISO 2562 |
Dimensions for modular units for machine tool construction - Slide units | 0 | Jan, 2019 | Buy | |
| 2790 | IS 9723 : 1981/ISO 2912 |
Dimensions for modular units for machine tool construction - Multi - Spindle heads - Casing and input drive shaft dimensions | 0 | Jan, 2019 | Buy | |
| 2791 | IS 9724 : Part 1 : 1981 |
Specification for taper male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 1 made from forgings | 0 | Sep, 2024 | Download | |
| 2792 | IS 9725 : Part 1 : 1981 |
Specification for male stud tee body (Stud Branch) for oil - Hydraulic couplings: Part 1 made from forgings | 1 | Sep, 2024 | Download | |
| 2793 | IS 9737 : 1981/ISO 2727 |
Dimensions for modular units for machine tool construction - Headstocks | 0 | Jan, 2019 | Buy | |
| 2794 | IS 9746 : Part 2 : 1981 |
Specification for equal cross body for oil - Hydraulic couplings: Part 2 made from bar stock | 1 | Nov, 2018 | Download | |
| 2795 | IS 9767 : 1981 |
Specification for tee coupling assemblies for oil - Hydraulic systems | 0 | Sep, 2024 | Download | |
| 2796 | IS 9769 : 1981 |
Specification for bulkhead straight coupling assembly for oil - Hydraulic systems | 1 | Sep, 2024 | Download | |
| 2797 | IS 9770 : 1981 |
Specification for bulkhead elbow coupling assembly for oil - Hydraulic systems | 1 | Sep, 2024 | Download | |
| 2798 | IS 9771 : 1981 |
Specification for carbide tipped core drills with morse taper shanks | 0 | Aug, 2024 | Download | |
| 2799 | IS 9772 : 1981 |
Specification for air operated high pressure grease pumps | 1 | Sep, 2019 | Download | |
| 2800 | IS 9773 : 1981 |
Specification for volume grease pumps | 0 | Mar, 2018 | Download | |
| 2801 | IS 9775 : 2000 (1 Revision) |
Carbide flats, squares and rounds -- Dimensions (first revision) | 0 | Jan, 2021 | Download | |
| 2802 | IS 9783 : 1981 |
Nomenclature of parts for wrist watches | 3 | Mar, 2024 | Download | |
| 2803 | IS 9798 : 2013 (2 Revision) |
Low pressure regulators for use with liquefied petroleum gas (LPG) - Specification (Second Revision) | 3 | Nov, 2023 | Download | |
| 2804 | IS 9804 : Part 1 : 2009/ISO 5296-1 |
Synchronous belt drivers - Belts: Part 1 pitch codes MXL, XL, l, H, XH and XXH - Metric and inch dimensions (First Revision) | 0 | Mar, 2018 | Buy | |
| 2805 | IS 9804 : PART 2 : 2010/ISO 5296-2 (1 Revision) |
Synchronous Belt Drives - Belts Part 2 Pitch Codes MXL and XXL - Metric Dimensions | 0 | Mar, 2018 | Buy | |
| 2806 | IS/ISO 9849 : 1991/ ISO 984 |
Optics and optical instruments - Geodetic instruments - Vocabulary | 0 | Mar, 2022 | Buy | |
| 2807 | IS 9865 : 1981 |
Specification for laboratory weights | 0 | Oct, 2022 | Download | |
| 2808 | IS 988 : 1959 |
General requirements for optical components | 0 | Mar, 2022 | Download | |
| 2809 | IS 9880 : 1981 |
Specification for wax - Coated paper splints | 1 | Apr, 2021 | Download | |
| 2810 | IS 9888 : 1981 |
Dimensions for sintered pellets of hard metal (Carbide) for wire, bar and tube drawing dies | 0 | Aug, 2024 | Download | |
| 2811 | IS 9890 : 1981 |
Specification for general purpose ball valves | 0 | Jun, 2024 | Download | |
| 2812 | IS 9892 : 1981 |
Specification for subtense bar | 0 | Mar, 2019 | Download | |
| 2813 | IS 9897 : 2013/ISO 1832:2017 (3 Revision) |
Indexable inserts for cutting tools -- Designation (third revision) | 0 | Nov, 2018 | Buy | |
| 2814 | IS 9898 : 1981 |
Specification for heliotrope, surveying | 0 | Mar, 2019 | Download | |
| 2815 | IS 9910 : 1981 |
Method for braze strength testing of coal and rock cutting tools with laid - On tungsten - Carbide tips | 0 | Sep, 2020 | Download | |
| 2816 | IS/ISO 9960 : PART 1 : 1992/ISO 9960 : PART 1 : 1992 |
Draughting instruments with or without graduation: Part 1 draughting scale rules | 0 | Nov, 2022 | Buy | |
| 2817 | IS/ISO 9962 : PART 1 : 1992/ISO 9962 : PART 1 : 1992 |
Manually operated draughting machines: Part 1 definitions, classification and designation | 0 | Mar, 2021 | Buy | |
| 2818 | IS/ISO 9962 : PART 2 : 1992/ISO 9962 : PART 2 : 1992 |
Manually Operated Draughting Machines Part 2 Characteristics, Performance, Inspection and Marking | 0 | Nov, 2022 | Buy | |
| 2819 | IS/ISO 9962 : PART 3 : 1994/ISO 9962 : PART 3 : 1994 |
Manually orerated draughting machines: Part 3 dimensions of scale rule chuck plates | 0 | Nov, 2022 | Buy | |
| 2820 | IS 9972 : 2023/ISO 10110-12:2019 (2 Revision) |
Automatic Sprinkler Heads for Fire Protection Service - Specification (Second Revision) | 0 | ---- | Buy | |
| 2821 | IS 9973 : 1981 |
Specification for visor for scooter helmets | 1 | Sep, 2022 | Download | |
| 2822 | IS 9995 : 1981 |
Specification for visor for non-metal police and firemen's helmets | 1 | Sep, 2022 | Download | |
| 2823 | IS 9999 : 1981 |
Specification for diesel locomotives for use in mines | 1 | Nov, 2018 | Download |